Database Develop

[Q] Can't download files on this site

I heard something recently about fileshare sites being shut down...is that what I'm experiencing. Tried to download files from: http://forum.xda-developers.com/showthread.php?t=1359068 and none of the links work. Actually a couple did but said I could only download a file I uploaded myself. I tried downloading from another thread on this site and had the same problem. Any solutions/alternatives? How can I download from the link I posted above?
Thanks!

Firecracker_RC said:
I heard something recently about fileshare sites being shut down...is that what I'm experiencing. Tried to download files from: http://forum.xda-developers.com/showthread.php?t=1359068 and none of the links work. Actually a couple did but said I could only download a file I uploaded myself. I tried downloading from another thread on this site and had the same problem. Any solutions/alternatives? How can I download from the link I posted above?
Thanks!
Click to expand...
Click to collapse
I see a KJ4 link. Have you tried the KJ5 thread? It's the newest one for our 7310.

Hi nirogu325, thanks for replying. This is what I am trying to do:
-Enable adhoc connection so I can use my windows mobile phone as a hotspot for my tabl, and
-Enable USB charging for my tab in my car and elsewhere, not just wall jack.
Based on what I've read, I need busybox (Titanium back up says it's installed but when I downloaded an app called wifiadhocenabler, it says it is not installed. Installing it from the market says I need Nand Unlock and this is where I'm stuck at the moment. Do you know how to perform this on the P7310? Or an easier way to meet the objectives above?
Thanks again

Firecracker_RC said:
Hi nirogu325, thanks for replying. This is what I am trying to do:
-Enable adhoc connection so I can use my windows mobile phone as a hotspot for my tabl, and
-Enable USB charging for my tab in my car and elsewhere, not just wall jack.
Based on what I've read, I need busybox (Titanium back up says it's installed but when I downloaded an app called wifiadhocenabler, it says it is not installed. Installing it from the market says I need Nand Unlock and this is where I'm stuck at the moment. Do you know how to perform this on the P7310? Or an easier way to meet the objectives above?
Thanks again
Click to expand...
Click to collapse
I assume you're on a stock firmware. If I were you, I'd flash this specific version which is already rooted and has busybox as you can read in the OP. Also, flash the v2d version of the motley kernel and go here for the USB charging script and instructions on enabling. I know that last link is for the 10.1, but it is the one motley linked to in the v2b version changelog in his kernel thread.

After my soft brick yesterday, I used Odin to "install" the version you attached in your General Guide post P310XARKJ5_P7310UEKJ5_HOME.tar.md5). That's the one, right?
Anyway, the good news is, I decided to install BusyBox without doing the Nand Unlock (maybe it was already done?), and it worked! The wifiadhocenabler app works now and I have a connection to my wm phone! Yay! Before trying the app (for the sake of onlookers) I tried the other method with the wpa_supplicant, such as the one here: http://androidtablethacks.com/android-tablet-hacks/how-to-enable-adhoc-wifi-on-android-tablets/ and it did not work for me. The app did!
So now, I'll try the kernel you posted above and then the USB charging.
I'm going to look over your general guide to see if I can figure out how to flash. I'm guessing it's the same or similar to when I recovered my tab in Odin...?

Firecracker_RC said:
After my soft brick yesterday, I used Odin to "install" the version you attached in your General Guide post P310XARKJ5_P7310UEKJ5_HOME.tar.md5). That's the one, right?
Anyway, the good news is, I decided to install BusyBox without doing the Nand Unlock (maybe it was already done?), and it worked! The wifiadhocenabler app works now and I have a connection to my wm phone! Yay! Before trying the app (for the sake of onlookers) I tried the other method with the wpa_supplicant, such as the one here: http://androidtablethacks.com/android-tablet-hacks/how-to-enable-adhoc-wifi-on-android-tablets/ and it did not work for me. The app did!
So now, I'll try the kernel you posted above and then the USB charging.
I'm going to look over your general guide to see if I can figure out how to flash. I'm guessing it's the same or similar to when I recovered my tab in Odin...?
Click to expand...
Click to collapse
If you mean flashing a CWM package as the motley kernel, a file goes in the SDcard, you access the CWM Recovery and flash. That's a generic way BUT depending on what you will flash you may have to wipe. That's why I avoided altogether putting generic instructions regarding CWM packages in my guide (instructions may vary between ROM and kernels). Read your flashable package's thread carefully.

kind of like rooting? Yes, do I have to wipe to flash the motley kernel? I'm not seeing the flashable packages thread, can you point me to it?

Firecracker_RC said:
kind of like rooting? Yes, do I have to wipe to flash the motley kernel? I'm not seeing the flashable packages thread, can you point me to it?
Click to expand...
Click to collapse
No, lol. If you want to flash the motley kernel just follow that thread's instructions. I gave you the motley kernel thread link in a previous post. For kernels, no wipe is necessary, for ROMs, yes.

Ok, thank you. lol

Firecracker_RC said:
Ok, thank you. lol
Click to expand...
Click to collapse
You're welcome. Some people have the tendency NOT to wipe while flashing ROMs...yet complain later on the road. Always wipe when it comes to ROMs if you want to avoid issues. The only bugs you will experience are the ones that come with the ROM already. Better safe than sorry.

Ah, that leads me to wonder...When my tab was soft bricked and I used Odin3 and inserted the KJ5 file into the PDA section, and so on (I think that was flashing), was I supposed to do a wipe before I did that? If so, would it be better if I started from scratch again? ...hoping not, but better now than latter I'm thinking.

Firecracker_RC said:
Ah, that leads me to wonder...When my tab was soft bricked and I used Odin3 and inserted the KJ5 file into the PDA section, and so on (I think that was flashing), was I supposed to do a wipe before I did that? If so, would it be better if I started from scratch again? ...hoping not, but better now than latter I'm thinking.
Click to expand...
Click to collapse
No. ODIN clears everything (including kernels, ROMs and CWM Recoveries). Everything back to stock. I was just referring to flashing other custom ROMs (non-ODIN, i.e. CWM flashable) procedures. Stick to the thread instructions in your chosen ROM and you'll be fine. It's just that some don't follow instructions and due to that, they may experience weird bugs.

That's good news, and strange, because after I used Oden3 (in the way I previously described), all my apps and files were still in tact. Does it just affect the system and not the file memory?
P.S. Hey! I'm no longer a noob! lol I just noticed I am now a "Junior Member".

P.S.S. I'm now running my tablet off my wm hotspot while charging it on my pc! woohoo

Firecracker_RC said:
That's good news, and strange, because after I used Oden3 (in the way I previously described), all my apps and files were still in tact. Does it just affect the system and not the file memory?
P.S. Hey! I'm no longer a noob! lol I just noticed I am now a "Junior Member".
Click to expand...
Click to collapse
That is because you didn't check F.Reset Time on the left side of ODIN before flashing. It is advisable to make sure it is checked. Thanks, I'm gonna put that little but important detail in my guide (dunno how I missed that one ). I advise using Titanium Backup (for apps backup) and then ODIN. You might be fine as you are, but if you ever experience something weird then you know.
Firecracker_RC said:
P.S.S. I'm now running my tablet off my wm hotspot while charging it on my pc! woohoo
Click to expand...
Click to collapse
I'm glad you made it!

Thanks for your support. If I ever have some extra change and feel like making a donation, I'll keep you in mind! Hey, where's your donation link anyway? Better get one!

nirogu325 said:
That is because you didn't check F.Reset Time on the left side of ODIN before flashing. It is advisable to make sure it is checked. Thanks, I'm gonna put that little but important detail in my guide (dunno how I missed that one ). I advise using Titanium Backup (for apps backup) and then ODIN. You might be fine as you are, but if you ever experience something weird then you know.
Click to expand...
Click to collapse
My tablet is definitely a little laggy now, but that could be the 3.2 HC. Since I did not check that off, does it mean that it did not install on a clean wipe? I'm wondering if I should just do it while I remember the path to how I got where I'm at now. I doubt I'll remember everything down the road.
I have been making nandroid backups as well as titanium app backups.

Firecracker_RC said:
My tablet is definitely a little laggy now, but that could be the 3.2 HC. Since I did not check that off, does it mean that it did not install on a clean wipe? I'm wondering if I should just do it while I remember the path to how I got where I'm at now. I doubt I'll remember everything down the road.
I have been making nandroid backups as well as titanium app backups.
Click to expand...
Click to collapse
As for donations, nah it's ok, I am no developer. As for the suggestion, it was just that, a suggestion for next time. Keep that in mind. It will become a habit down the road.
Sent from my GT-P7310

nirogu325,
I'm back to do my clean wipe. I performed the wipe/data reset in nandroid and now it's saying there is an update from KJ5 to LA3. Do you still think the custom kj5 is better than the stock LA3? I'm wondering if I should just install the update, root, install the motley kernel and go from there...?
Hope you're well! I still think you should add a donate link...you don't have to be a developer, your assistance/guidance is equally helpful to the community.

While I'm waiting, I flashed http://forum.xda-developers.com/showthread.php?t=1375112 and then I noticed I have the old CMR so I downloaded your updated package: GTab89Files and I cannot paste a single file from that folder onto my tab. I can paste files from other folders, but this one I copy and when I go to paste the paste option is not enabled; if I drag I get a little red circle with a line through it. Any ideas as to why it's rejecting?

Mistreak7 [miui][cm9]

For the few who wanted MIUI ported to the streak, you may get it soon
MIUI FOR THE STREAK7 IS NEAR OPERATIONAL STANDARDS
STOCK PARTITIONS REQUIRED!
WILL NOT WORK WHEN COMING FROM HS-R1 THROUGH HS-R6 OR ICS-B1 THROUGH B4 FROM GIVEEN
​
This is still a work in progress (that means not everything works, there will be bugs)
:victory:WE HAVE BOOT!:victory: however its followed by many more of them if you lock the device
landscape lock screen and portrait general use... for now
​
3G AND 4G HAVE NOT BEEN TESTED HOWEVER CODE IS IN PLACE FOR THEM
NO CAMERA BECAUSE ITS MORE SH!T TO WORRY ABOUT
TWRP2 or CWM 6.0.1 required ​
as always if you flash it and its now FUBAR its your fault
There is a possibility you will f*** up, if you do the responsibility for repairing it is yours (why would I fix your mistakes)
Bug report is to be user fed. If you have hardware faults or have something not work that you think should work (apart from the camera) then submit a logcat
Thanks to DJ_steve and Giveen for ICS B4, TheManii for porting ICS B4 to stock partitions, a bunch of crazy guys who made MIUI possible and Linus Torvalds for linux kernel​
Download links will probably be up in the next 72hours
English only as XDA is in english only

If flashing through CWM doesn't work then push the files across with adb/fastboot then reboot
complaint report:
1. No GApps: you have to flash them post install. the end.
2. wouldnt it be easier if?: no, this is my way of doing it, be thankful you got this rather than being negative about the way I work
3. camera: decided you can live without it (however I may change my mind at a later date)
4. wifi: untested (though it should work)
5. possible lock ups every 20-30min: its a beta, don't expect it to be perfect
6. 3g/4g: untested
7. bluetooth: untested (though it should work)
8. when will the next rom be ready: see my signature
9. why doesnt the rom boot properly when I have CWM6.0.1.x?: because you probably came from HS-r6, have one of the failed build that I accidentally uploaded or havent cleared your caches
10. whats with the intermittent reboots?: I'm not a f***ing miracle worker here guys, I just do this in my spare time when I have had enough to drink to care about the wants of other people

Now this will be interesting!
Sent from my Galaxy Nexus using xda premium

ElfinJNoty said:
Now this will be interesting!
Sent from my Galaxy Nexus using xda premium
Click to expand...
Click to collapse
What's the point in waiting for something you should get the thanks for

looking forward to it!

as are many other people, if there is anything you want included in it then its up to you guys to inform me (gApps will be removed, as always- if I include them then they are there, dont judge me)

Second build is up

I cant download this ROM from Google Docs because of access error, pls check

nicolay.n said:
I cant download this ROM from Google Docs because of access error, pls check
Click to expand...
Click to collapse
link fixed, try now

Flashable from CWM? Any wipes needed?

CWM 6.0.1.x would be worth a try and try wiping dalvik cache and perform a fac reset if it doesnt boot preoperly

Nocturnal_50, tried to flash from HoneyStreak R7 + CWM 6.0.1.0 twice. It says "MIUI ICS port ..." and so on, installing complete and... nothing changes, im on R7 with all of my apps and settings

nicolay.n said:
Nocturnal_50, tried to flash from HoneyStreak R7 + CWM 6.0.1.0 twice. It says "MIUI ICS port ..." and so on, installing complete and... nothing changes, im on R7 with all of my apps and settings
Click to expand...
Click to collapse
did you do a fac reset and clear dalvik?

Nocturnal_50 said:
did you do a fac reset and clear dalvik?
Click to expand...
Click to collapse
Before or after flashing? And factory - user data only or with internal storage?

nicolay.n said:
Before or after flashing? And factory - user data only or with internal storage?
Click to expand...
Click to collapse
try both and all options, if it works then awesome, if not then I may have uploaded the wrong image or have forgotten something in this build

Nocturnal_50 said:
try both and all options, if it works then awesome, if not then I may have uploaded the wrong image or have forgotten something in this build
Click to expand...
Click to collapse
Tried wipe before and after. Still welcome screen from HoneyStreak

nicolay.n said:
Tried wipe before and after. Still welcome screen from HoneyStreak
Click to expand...
Click to collapse
provide a printscreen/picture of your about tablet section so I can see if its flashed any settings across, perhaps flash with twrp/push the rom with adb

Nocturnal_50 said:
provide a printscreen/picture of your about tablet section so I can see if its flashed any settings across, perhaps flash with twrp/push the rom with adb
Click to expand...
Click to collapse
I cannot because it hangs on welcome screen, press on Begin button do nothing. I flashed B4 now

nicolay.n said:
I cannot because it hangs on welcome screen, press on Begin button do nothing. I flashed B4 now
Click to expand...
Click to collapse
how long have you given it on initial boot? try 15min at least

Nocturnal_50 said:
how long have you given it on initial boot? try 15min at least
Click to expand...
Click to collapse
After flashing and wiping it boots in 3 minutes and shows me welcome honeycomb screen, which from i cannot continue to set time settings and begin working with device. I will give them 15 or 20 minutes, if they need, but it boots in 3

[Q] Now my kids device

I gave my kids my old Galaxy S1 Captivate. I have left the sim card in so that the "Emergency Call" button did not show up on the lock screen and I got a new sim anyway. Is there a way to remove the sim and get rid of the call feature all together? I was going to root the phone and update to 4.4 when I can. Is there a way to get rid of the "phone" features? I also have a Moto Atrix that I was going to do the same thing for my other kid as well. Any help would be great.

If it's rooted you can delete the phone and messaging apps
Sent from my ST25i using xda app-developers app

Andrewasth said:
If it's rooted you can delete the phone and messaging apps
Sent from my ST25i using xda app-developers app
Click to expand...
Click to collapse
When I tried rooting it, I got "E:signature verification failed Instalation aborted." didnt know what that meant so I was going to try to redo it on my pc. I originally tried to email the update.zip to myself and save it to the phone and reboot it that way but I obviously did something wrong.

Try again and report

wallacesm21 said:
When I tried rooting it, I got "E:signature verification failed Instalation aborted." didnt know what that meant so I was going to try to redo it on my pc. I originally tried to email the update.zip to myself and save it to the phone and reboot it that way but I obviously did something wrong.
Click to expand...
Click to collapse
Try CF Autoroot from the play store (or think you can find it here).
Otherwise, you can flash a kernel with Odin (Corn for GB, Speedmod for Froyo) and enable root in recovery.

http://forum.xda-developers.com/showthread.php?t=2347220
Flash a kernel with CWM, flash CM7, then follow the instruction in the thread linked

wallacesm21 said:
I gave my kids my old Galaxy S1 Captivate. I have left the sim card in so that the "Emergency Call" button did not show up on the lock screen and I got a new sim anyway. Is there a way to remove the sim and get rid of the call feature all together? I was going to root the phone and update to 4.4 when I can. Is there a way to get rid of the "phone" features? I also have a Moto Atrix that I was going to do the same thing for my other kid as well. Any help would be great.
Click to expand...
Click to collapse
heres what bwolf was talking about https://docs.google.com/document/d/1YvC_lLbjk06WOttsifG8fD2QUHvC9_rDtZdNrDZKAFc/edit?pli=1 be sure to give Val D. a thanks.

Credit goes to korockinout13, the author.
I often give a link to this Guide because it's explains very well the upgrade process.

Thanks guys for the info. Got everything set up, but now after rebooting, its telling me that android keyboard has stopped working and I am unable to type anything. Any thoughts?
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

What ROM?

Cm10.1.3
Sent from my SAMSUNG-SGH-I747 using xda app-developers app

wallacesm21 said:
Cm10.1.3
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
Click to expand...
Click to collapse
cm-10.1.3-captivatemtd.zip then gapps-jb-20130729.zip
did I do the wrong gapps?

Try this:
- do Factory Reset
- clear cache
- clear dalvik
- re-flash CM10.1.3 package
- flash latest Android 4.2.2 gapps 20130812
- reboot in recovery
- do Factory Reset one more time
- clear cache
- clear dalvik
- reboot
See if this helps. Usually solves unexplained FC issues.
Sometimes it's just a bad download. If no luck, try to re-download the packages.

Val D. said:
Try this:
- do Factory Reset
- clear cache
- clear dalvik
- re-flash CM10.1.3 package
- flash latest Android 4.2.2 gapps 20130812
- reboot in recovery
- do Factory Reset one more time
- clear cache
- clear dalvik
- reboot
See if this helps. Usually solves unexplained FC issues.
Sometimes it's just a bad download. If no luck, try to re-download the packages.
Click to expand...
Click to collapse
No Luck on the re-flash. I am now going to re-download the packages and try it again.
I am not finding gapps-jb-20130812-signed.zip. I found a link in this forum and when it gets to the goo.im site it says file not found. When I search for gapps-jb-20130812 on the site, it doesnt have any on that date. Do I need to install a different gapps?
Here is the link to the link.
http://forum.xda-developers.com/showthread.php?t=2405292

wallacesm21 said:
No Luck on the re-flash. I am now going to re-download the packages and try it again.
I am not finding gapps-jb-20130812-signed.zip. I found a link in this forum and when it gets to the goo.im site it says file not found. When I search for gapps-jb-20130812 on the site, it doesnt have any on that date. Do I need to install a different gapps?
Here is the link to the link.
http://forum.xda-developers.com/showthread.php?t=2405292
Click to expand...
Click to collapse
im using 10.1.3 right now, maybe its a bad flash?

wallacesm21 said:
I am not finding gapps-jb-20130812-signed.zip.
Click to expand...
Click to collapse
It's here - http://wiki.cyanogenmod.org/w/Gapps
Check MD5 sums for CM and Gapps packages just to make sure download is OK. Use the attached tool.
Trozzul said:
im using 10.1.3 right now...
Click to expand...
Click to collapse
Yep, like many other Captivate users. No issues with CM Stable releases.

Val D. said:
It's here - http://wiki.cyanogenmod.org/w/Gapps
Check MD5 sums for CM and Gapps packages just to make sure download is OK. Use the attached tool.
Yep, like many other Captivate users. No issues with CM Stable releases.
Click to expand...
Click to collapse
YES! I am a dumb noob! Thank you guys for the input. I guess I was installing the wrong gapps cause I just got it and re-flashed everthing and now it works. Again, thank you guy for the help. I will be continuing to learn more, theres just so much information everywhere.

wallacesm21 said:
YES! I am a dumb noob! Thank you guys for the input. I guess I was installing the wrong gapps cause I just got it and re-flashed everthing and now it works. Again, thank you guy for the help. I will be continuing to learn more, theres just so much information everywhere.
Click to expand...
Click to collapse
glad to hear you fixed your problem, happy flashing!

wallacesm21 said:
I will be continuing to learn more, theres just so much information everywhere.
Click to expand...
Click to collapse
Captivate is one of best supported devices. CM is only the beginning of the road. Is the phone still going to your kid? :laugh:

Val D. said:
Captivate is one of best supported devices. CM is only the beginning of the road. Is the phone still going to your kid? :laugh:
Click to expand...
Click to collapse
Yes, the phone will still go back to my daughter. It was a testing ground for me, since it is the first time. I will also be rooting and flashing my son's Moto Atrix and my Galaxy Tab 10.1 (first gen) "the one I really wanted to do". I also have my Galaxy S3 and my wifes Galaxy S3, but I wont be touching those just yet. Needed to get my feet wet. Now I need to figure out how to disable the phone feature part of the phones, and other stuff I don't want them to get into.
BTW, my kids are 4 almost 5, so all they need is the games. Using our old phones is much cheaper than buying any kind of game system.

[Q] Problems Installing - ★AMCHA Rom v5.00

So I've tried installing this half a dozen times, I did a full wipe I'm using the i9305 and installing this using both kernel options for the knox based bootloader, after it completes installation it says complete, reboot the phone and I end up stuck at the Samsung Galaxy s3 black screen and it never boots into the os.
I noticed while installing this it installs some modem not sure what one it is but I thought perhaps that was the issue, to installed went straight into download mode and flashed a optus modem i've been using for my phone rebooted but still same issue.
Would appreciate some help with this, I've tried searching the thread for similar issues no such luck.
Thanks

Demonic Wraith said:
So I've tried installing this half a dozen times, I did a full wipe I'm using the i9305 and installing this using both kernel options for the knox based bootloader, after it completes installation it says complete, reboot the phone and I end up stuck at the Samsung Galaxy s3 black screen and it never boots into the os.
I noticed while installing this it installs some modem not sure what one it is but I thought perhaps that was the issue, to installed went straight into download mode and flashed a optus modem i've been using for my phone rebooted but still same issue.
Would appreciate some help with this, I've tried searching the thread for similar issues no such luck.
Thanks
Click to expand...
Click to collapse
maybe your using a old recovery?

MaHo_66 said:
maybe your using a old recovery?
Click to expand...
Click to collapse
Thanks but it's not that, I wasn't even aware of having to use the newer one for the recovery till recently and have been using the one for the old recovery even tho I have the new one... either way, I tried installing both the new and old recovery's same results.

Demonic Wraith said:
Thanks but it's not that, I wasn't even aware of having to use the newer one for the recovery till recently and have been using the one for the old recovery even tho I have the new one... either way, I tried installing both the new and old recovery's same results.
Click to expand...
Click to collapse
i see, well your 2 posts away from being able to post in development thread, you will get better help in rom thread try a full wipe anyway and install the rom with default aroma settings, maybe the problem lies in some setting you change in aroma installer..

MaHo_66 said:
i see, well your 2 posts away from being able to post in development thread, you will get better help in rom thread try a full wipe anyway and install the rom with default aroma settings, maybe the problem lies in some setting you change in aroma installer..
Click to expand...
Click to collapse
True, that could be it, except i thought of that myself and just hit next next next to the end and hit install to see if it would help matters it didn't. Yeah I tried posting there to begin with, but even if your an advanced person you have to post here first lol fun times
I did think maybe there's a newer version of philz recovery out and mine just buggers it up some how it offers to install 6.41.6 not sure what my version is.. it crossed my mind tho but I wouldn't presume that's the most likely of causes.

Demonic Wraith said:
True, that could be it, except i thought of that myself and just hit next next next to the end and hit install to see if it would help matters it didn't. Yeah I tried posting there to begin with, but even if your an advanced person you have to post here first lol fun times
I did think maybe there's a newer version of philz recovery out and mine just buggers it up some how it offers to install 6.41.6 not sure what my version is.. it crossed my mind tho but I wouldn't presume that's the most likely of causes.
Click to expand...
Click to collapse
hmm.. well philz 6.41.6 is the latest one a.t.m and roms these days need up to date recovery so you can give it a shot if you are not on philz yet. here is the latest one http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
flash it with odin then try again, hopefully this will fix your problem

MaHo_66 said:
hmm.. well philz 6.41.6 is the latest one a.t.m and roms these days need up to date recovery so you can give it a shot if you are not on philz yet. here is the latest one http://forum.xda-developers.com/gal...covery-i9305-cwm-philz-twrp-versions-t2694249
flash it with odin then try again, hopefully this will fix your problem
Click to expand...
Click to collapse
Yeah unfortunately that didn't work either, was worth a shot tho now I can post in the proper place.

Demonic Wraith said:
Yeah unfortunately that didn't work either, was worth a shot tho now I can post in the proper place.
Click to expand...
Click to collapse
haha yeah man

[Q] Wifi wont turn on!

Recently my Galaxy S WiFi turned off and it wont turn back on no matter what I try. So far I've tried clearing the Caches, Factory reset and I tried reinstalling the ROM as a whole. I'm currently on CM11. Help please!!!
Thanks in advance

Flash stock rom. Then reflash cyanogenmod.
P.S: man, it's been ages since I've posted on the s1 forum of xda.

Pirlo#21 said:
Recently my Galaxy S WiFi turned off and it wont turn back on no matter what I try. So far I've tried clearing the Caches, Factory reset and I tried reinstalling the ROM as a whole. I'm currently on CM11. Help please!!!
Thanks in advance
Click to expand...
Click to collapse
Did you read whole OP of the CM11 thread?
Short before OP end pawitp has written under FAQ how to solve wifi issue.
tetakpatalked from N7100

Do you have a link to the FAQ?

I issued the command to wipe WiFi data, but it still wont budge.

tetakpatak said:
Did you read whole OP of the CM11 thread?
Short before OP end pawitp has written under FAQ how to solve wifi issue.
tetakpatalked from N7100
Click to expand...
Click to collapse
Could it be the kernel I was running? I had some weird venom one I believe. I really don't know though I'm just throwing anything out there.

I have the same issue.
I am rather new here, so give me a thread, if any, where to find the solution.