Hello. At first i apologize for my english.
I have a problem with my milestone. A keyboard backlight starts to work only after I opened it and change the brightness of the screen (through widget, or option menu - it doesn't matter). I have cyanogenmod 7, but it was the same on cyanogenmod 6 and 2.1 oficial firmware.
Thanks in advance for the help.
no ideas? =(
do you have the light sensor turned on? does this happen in bright day or while using in dark?
Do you have the light sensor filter on? Try turning that off. The Milestone doesn't really need a filter on the sensor.
backlight is not functioning
Hi there,
It is not a software issue and I had the same thing. Apparently these backlight breaks easily on these device. Just book it in for repairs.. I asked myself the same question for many months until I gave up and called the Motorola call centre. I hope this helps.
MuF123 said:
do you have the light sensor turned on? does this happen in bright day or while using in dark?
Click to expand...
Click to collapse
it doesn't matter. in both cases it doesn't works.
i think it's a software problem, because when i reboot in recovery the backlight always is turned on.
I have tried a lot of versions of cyanogen and found that a keyboard backlight is working properly only on CyanogenMod-7.1.0-RC5-11.05.21 . I think it's very strange...
Try setting display brightness to 'Auto'. That worked for me.
We just picked up a used Droid for the dev department to play with. The backlight comes on during boot up but goes off as soon as it gets into the OS. Settings appear to be normal (full brightness). Any ideas?
hard reset didn't help. The backlight goes off at the exact moment the buzzer announces the os startup. (if that makes sense)
try using other roms..
Working on rooting and loading a rom right now. I took the phone home with me and discovered the backlight isn't out just very dim. It will change slightly when I move the brightness slider around.
OK, it's now running Steel Droid with the same issue. I have a bright screen in recovery and during boot and a very dim one once booted.
try to un-check the automatic brightness, and set it to full brightness...
if that doesnt work... might be a hardware related problem...
Did that already. Seems like an odd hardware issue. I have full backlight in recovery and during boot.
Here is a video of the issue http://www.youtube.com/watch?v=RxHqN_lycG8
Stupid question: do you have auto-brightness active? If so, maybe your light sensor could be broken.
downloadman said:
Stupid question: do you have auto-brightness active? If so, maybe your light sensor could be broken.
Click to expand...
Click to collapse
Auto-brightness is unchecked and the brightness is set to max. There is a very slight change to the brightness when I adjust the slider back and forth.
BTW. It is currently running CM7 with the same issue.
I haven't seen this posted anywhere so I figured I would post for anyone having a similar issue with their One.
Recently my phones backlight stopped working. It would not work at boot or in the ROM. I tried flashing to stock and tried optimizing the proximity sensor, but no luck. It was clearly a hardware problem.
Not seeing any solution to this issue other than people saying it is the screen or the motherboard I decided to order a new screen.
Well installed the new screen, still no backlight. I was about to give up on it and just buy another phone, but I got the feeling that the light sensor may still be my issue. The backlight on the capacitive buttons would not turn on unless I helded down the power button to force shutdown. This meant the backlights for the buttons at least worked and something else in the phone was preventing them from turning on.
I decided to remove the light sensor from the daughterboard (opposite the power button connector). Booted it back up, and the screen came right on. The phone works great without it, other than auto brightness. The screen still turns off when against face during calls.
So long story short if your LCD and button backlights aren't working don't order an LCD or rule your phone dead right away. Open it up and take out the light sensor, it could be the culprit.
I'm going to order a new sensor and can update with results after installing if anyone is interested. In the meantime I'm using the phone without it, no hiccups so far.
htc one screen backlight issue
nsodmordex said:
I haven't seen this posted anywhere so I figured I would post for anyone having a similar issue with their One.
Recently my phones backlight stopped working. It would not work at boot or in the ROM. I tried flashing to stock and tried optimizing the proximity sensor, but no luck. It was clearly a hardware problem.
Not seeing any solution to this issue other than people saying it is the screen or the motherboard I decided to order a new screen.
Well installed the new screen, still no backlight. I was about to give up on it and just buy another phone, but I got the feeling that the light sensor may still be my issue. The backlight on the capacitive buttons would not turn on unless I helded down the power button to force shutdown. This meant the backlights for the buttons at least worked and something else in the phone was preventing them from turning on.
I decided to remove the light sensor from the daughterboard (opposite the power button connector). Booted it back up, and the screen came right on. The phone works great without it, other than auto brightness. The screen still turns off when against face during calls.
So long story short if your LCD and button backlights aren't working don't order an LCD or rule your phone dead right away. Open it up and take out the light sensor, it could be the culprit.
I'm going to order a new sensor and can update with results after installing if anyone is interested. In the meantime I'm using the phone without it, no hiccups so far.
Click to expand...
Click to collapse
hey
i'm having the same problem are you sure that it is a hardware issue and not the software issue my h/w buttons doesn't light at all and my screen stays black for some time after unlocking the phone it comes back but the brightness is too low
any suggestions would be appriciated
Mine was a hardware issue, the backlight did not turn on at all, even on the htc start screen. The capacitive buttons would only flash when holding down the power button. If ypurs is intermittent and your phone is rooted you cantry insralling an app fhat alows you to change the proximity settings, sorry, cant remember the name of the app i tried. If the app can't detect the sensor it is likely broken like mine was. If that doesnt work try a different rom.
If neither of those help it is likely a hardware issue.
i used the app both light senor and proximity sensor are working fine
any other tips that i can try
kingkri said:
i used the app both light senor and proximity sensor are working fine
any other tips that i can try
Click to expand...
Click to collapse
Sorry for taking so long to respond, just noticed your reply.
Did you ever get it working? If a different rom did not solve your issue maybe your sensor is just dirty. You could try cleaning it with a can of compressed air. Not sure how effective it would be, but it may help.
Hi @nsodmordex, my HTC One M7 is in the same situation as you describe, no backlight, but working. I'm going to try your suggestion of removing the light sensor, but I'm unable to find it, I'm not sure where the light sensor is.
Please, can you tell me which component is the light sensor? This is a photo of the daughter board:
htt ps://d3nevzfk7ii3be.cloudfront.net/igi/ALPJIMWqGsLwul5Y.huge
Thanks!
Found it... it's located behind the daughter board, at the two little holes of the front cover of the phone. I have removed it but no luck, the screen continues black, but the mobile is working good.
it seems a screen related problem, I'm going to try to change the screen and see if it comes to life again.
Drain battery
Hi all,
I also have this problem and found out that if I drain the battery completely and wait about 1 hour, it turns back on when I put the charger in the phone, if the screen doesn't turn on, drain and wait longer, if it does turn back on then power the phone. Do not wait till it has a little bit power because than it fails again and you must drain and wait again.
It works for me and I will make a video of it and post a link later.
Hope it works for you all!
Tip: use a led flashlight to see what's on the display
Ps. Stock m7
Whats the definitive solution for no backlight screen?
jvpag said:
Whats the definitive solution for no backlight screen?
Click to expand...
Click to collapse
Clean / replace the lightsensor
Dippie83 said:
Clean / replace the lightsensor
Click to expand...
Click to collapse
I had removed it and the backlight isn,t working
jvpag said:
I had removed it and the backlight isn,t working
Click to expand...
Click to collapse
Than the lightsensor is broken, are the contacts on the back of the sensor 100% clean, in my case it was dust that created the error.
Is the display not broken?
Dippie83 said:
Than the lightsensor is broken, are the contacts on the back of the sensor 100% clean, in my case it was dust that created the error.
Is the display not broken?
Click to expand...
Click to collapse
The display is ok because I can see what is on the phone with the LED flash of a Galaxy S2 so I think that the display is not broken.
The backlight doesn´t turn on with the light sensor and without it either. But i can remember that the last time that it worked the Autobrightness was fine
Edit: I tried rebooting on fastboot and recovery via ADB and the screen is without backlight too
PD: Sorry for my English
jvpag said:
The display is ok because I can see what is on the phone with the LED flash of a Galaxy S2 so I think that the display is not broken.
The backlight doesn´t turn on with the light sensor and without it either. But i can remember that the last time that it worked the Autobrightness was fine
Edit: I tried rebooting on fastboot and recovery via ADB and the screen is without backlight too
PD: Sorry for my English
Click to expand...
Click to collapse
In my case, if it worked it was ok also the autobrightness.
I think the sensor is broken and if you replace it the backlight comes back on (sensor is +- 10€ in holland)
Just give it shot
Have you tried the battery drain?
Hehe my english is also not very good
Dippie83 said:
In my case, if it worked it was ok also the autobrightness.
I think the sensor is broken and if you replace it the backlight comes back on (sensor is +- 10€ in holland)
Just give it shot
Have you tried the battery drain?
Hehe my english is also not very good
Click to expand...
Click to collapse
But as I read, if I remove the sensor and turn on the phone without it, will it work?
In this moment the phone has 0% battery and if I plug the charger i can see the red light and if i use a flashlight, i can see "the battery with the lightning" on the screen
jvpag said:
But as I read, if I remove the sensor and turn on the phone without it, will it work?
In this moment the phone has 0% battery and if I plug the charger i can see the red light and if i use a flashlight, i can see "the battery with the lightning" on the screen
Click to expand...
Click to collapse
No i dont think thats gonna work, push the power button (whitout charger) every time till the battery is really empty, than wait an hour.
If you connect the charger and the screen will not turn on, wait longer. a night is even better.
If the screens comes on then turn direct the phone on dont let it dim itself or else you can wait again.
This worked in my case but my lightsensor was dirty and after a cleanup it worked normal and it stil works.
Dippie83 said:
No i dont think thats gonna work, push the power button (whitout charger) every time till the battery is really empty, than wait an hour.
If you connect the charger and the screen will not turn on, wait longer. a night is even better.
If the screens comes on then turn direct the phone on dont let it dim itself or else you can wait again.
This worked in my case but my lightsensor was dirty and after a cleanup it worked normal and it stil works.
Click to expand...
Click to collapse
Okay, thanks, it worked once, but with the phone turned on and the backlight working, if the screen turns off, the backlight runs away again.
can you repeat point by point what i need to do?
when you say "drain" the battery, you mean leaving the phone on till it turns off? then what should i do? wait an hour and plug the charger to see if it works right? okay, and later if the phone turns on what i need to do?
jvpag said:
Okay, thanks, it worked once, but with the phone turned on and the backlight working, if the screen turns off, the backlight runs away again.
can you repeat point by point what i need to do?
when you say "drain" the battery, you mean leaving the phone on till it turns off? then what should i do? wait an hour and plug the charger to see if it works right? okay, and later if the phone turns on what i need to do?
Click to expand...
Click to collapse
By 'drain the battery' i mean continuously turning the phone on with a empty battery till it does nothing, not even vibrate.
It must be so empty that the phone not knows its a phone.
And yes if the screen comes on just power it on, thats it.
1 drain
2 wait
3 plug in charger
4 screen comes on
5 turn phone on
6 done
1 drain
2 wait
3 plug in charger
4 screen stays off
5 drain and wait longer
that are the steps that worked for me
Thanks @Dippie83 , it "worked" draining the battery and waiting forma a night to turn it on but when i turn on and i push the power button yo lock the screen, the backlight stops working
Any idea?
Hello!
I wonder if anyone had this issue. Yesterday suddenly the backlight of my XT894 started to act weirdly. When i pressed the unlock button, the screen would go very bright and then shut off after 2-3 seconds, but I still could swype the unlock screen and hear the unlock click, even with the dark screen. With a little bit of external light I could see the image was there, but the backlight of the screen was not on. I went on to the power shortcuts and disabled the Automatic brightness control, and as soon as I did that the display turned on, very dimly but it turned on. When I set the brightness control to maximum, it still is very low. If i set the brightness to minimum, its almost impossible to see anything. In display settings, the automatic brightness is unchecked and the brightness fader is set to maximum.
I started suspecting the light sensor, so I went ahead and downlaoded a sensor tester app, and the light sensor appeared to be reporting the light levels correctly - low readings in the dark, and much higher readings in direct light.
Is my phone backlight dying? Any idea if this might be due to defective mainboard, or the display itself?
I already did some repairing on the phone myself, so I am comfortable dissassembling it and changing parts. Few months ago I changed the main board because my old one had a broken usb connector, and it worked fine until now.
Any advice would be greatly appreciated!
Thank you in advance!
Best regards,
Konstantin
If I remember right, by default, the maximum auto-brightness is still lower than actual maximum, so if the screen can barely be seen at manual max, it makes sense that the screen is pretty much unviewable with auto on.
Idea:
If you have it installed, boot into Safestrap and see if your brightness is normal.
If not, pull up the diagnostic menu (hold Vol - while powering on iirc, might be Vol - and +).
If your brightness is normal in those, it's probably something gone wonky in Android. If not, your screen backlight might be going and needs replaced. I don't think there's anything on the mainboard that would cause it, aside from the circuitry actually supplying power to the backlight...
Screen replacement actually isn't terrible for the D4, if it comes to that, since it's not fused to the glass (like certain single-piece phones for example...*sideways glance at the S3*).
Hello!
Thank you for your reply!
Effectively something is very wrong with the device. Today I woke up to find it completely unresponsive, had to turn it off by holding the power button for a while. When it turned on again, the whole screen was white with glitchy color lines since the very reboot, and nothing else happens, couldnt even turn it off without unscrewing the battery.
I will put the old main board to see if the other one died.
Thank you again!
Best regards,
Konstantin
My red magic 3 will randomly turn the screen on even with the option to not wake up the screen in every settings I could find. I have seen it happen when I'm driving or walking and even just having the phone on my night stand.
Then screen will turn on and there's no new messages or notifications, it just turns on.
Any ideas as to what I could try?
My friend has this exact same issue! We both have the same phone, mine does not do it but his does. Just, randomly the screen turns on, doens't seem to be related to notifications or anything. If anyone knows what's causing this, it would be appreciated. Thanks!
chrous said:
My red magic 3 will randomly turn the screen on even with the option to not wake up the screen in every settings I could find. I have seen it happen when I'm driving or walking and even just having the phone on my night stand.
Then screen will turn on and there's no new messages or notifications, it just turns on.
Any ideas as to what I could try?
Click to expand...
Click to collapse