Database Develop

[q] help required!!!

Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..

CookieRaider said:
Hello frnds m new to xda forum...
i rooted my optimus black its on gingerbread v20E
m nt able to flash a custom rom on it...
can anyone plz help me n suggest any custom rom for my phone..
Click to expand...
Click to collapse
If its rooted then it has clock work mod recovery install, so just install rom manager from market and select reboot into recovery, have the custom rom's zip copied on your memory card, then after rebooting into recovery do wipe data and reset then select install zip from memory card and select the copied .zip file and it gets install new rom. Zeus is good custom rom, marvel v7 is also good
Sent from my LG-P970 using Tapatalk 2

i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...

CookieRaider said:
i tried using cyanogen mod v7 bt my phone went in bootloop at the time of rebooting then i had to install my stock rom again..
this happened twice so now i want to download a working rom
n by zeus n marvel are compatible with v20N only as they have stated...
Click to expand...
Click to collapse
did you do a full wipe before flashing cm7?wipe data/cache and dalvik cache through cwm.anyway since you are new to the forum check this thread.it will help you a lot.
http://forum.xda-developers.com/showthread.php?t=1487105

ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:

CookieRaider said:
ya i wipped all dat stuff..
even i wipped battery stats too..
wic rom do you hav n wat is android version??
n thanks for the reply..:thumbup::thumbup:
Click to expand...
Click to collapse
i mostly use zeus 6.11 2.3.4 v20o version.zeus is very stable and fully working but some people experienced sods.here is the thread:http://forum.xda-developers.com/showthread.php?t=1454274
at the moment i use miui but some features are not working:http://forum.xda-developers.com/showthread.php?t=1588360
i have used them all from time to time and marvel is great too with aroma installer (gingerbread 2.3.4 v20o).very stable too:http://forum.xda-developers.com/showthread.php?t=1473592
regarding your problem now.are you able to enter cwm?if yes flash zeus or marvel at first.check the development section.it has many choises there and you can find every information in the first posts.

wic android version of gingerbread do you have on your phone..
sorry for asking again...

CookieRaider said:
wic android version of gingerbread do you have on your phone..
sorry for asking again...
Click to expand...
Click to collapse
In zeus gingerbread 2.3.4 v20o.now that i have miui it is 2.3.7.
Sent from my P-970 using Tapatalk

thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7

CookieRaider said:
thnx for the reply n i can enter cwm...:thumbup:
by the way how did you get 2.3.7
Click to expand...
Click to collapse
The miui in the thread that i posted above is based on gingerbread 2.3.7.like cm7 which is also 2.3.7.
Sent from my P-970 using Tapatalk

to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??

CookieRaider said:
to flash any rom do we need to have cyanogen mod installed or it can be flashed independently??
Click to expand...
Click to collapse
No you just need to have root access and cwm recovery.just remember to do full wipe before flashing a rom.
Sent from my P-970 using Tapatalk

n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??

CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
I think that you have not quite understand.whichever rom you are going to flash has a specific base.for example zeus has 2.3.4 v20o as a base.when you flash it your phone will have 2.3.4 v20o as a base.what you had before is irrelevant.since you flash a different based rom your firmware will change.take a look at the noob how to that i posted above.it refers to kernels and bases.if you flash nova rom for example then you go back to 2.2.2 froyo.if you flash miui you have 2.3.7.it foesn't matterwhat you have now.try to find some things on your own because we went way off topic and the moderator will close the thread.search is your assistant.
Sent from my P-970 using Tapatalk

ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:

CookieRaider said:
ok..
caused lot of inconvenience to you...
sorry...
thnx for the help:thumbup::thumbup:
Click to expand...
Click to collapse
No inconvinience.if you want send me pm better for info.i told you that because the moderator will delete the thread if we are off topic.and for thanks you can just hit the thanks button.
Sent from my P-970 using Tapatalk

CookieRaider said:
n is miui compatible with any gingerbread version??
i mean to does it works with v20(B/E/N/O) ??
Click to expand...
Click to collapse
once youre rooted, it dosent matter what base youre using..... cos when you flash a rom you flash together with the base so it changes your whole phone software..... so its no problem switching between bases, you can even flash back froyo/ donut and go back to gb if you want.... but make sure you do your full wipes...
for roms,once rooted, only the type of device is specific.... type of base is not....(unless specified)
eg. you cannot flash an ics rom made for htc evo on your OB but what you can do is flash any kind of rom with any kind of base which was made specifically for OB
again, please do read...
Noobys How to Thread
Rom Installation Step By Step
--

even if i downloaded cyanogenmod 7 it didnt work for me..
i wiped all caches(dalvik, battery stats, factory reset) bt my went in bootloop during rebooting n i had to flash my firmware again..
why did dis happen??

Did you checked md5 checksum? Maybe file was corrupted.
Trolling in the deep

can you suggest any app for checking it??

[Q] What rom do you use?

Hi, just bought a SGS Advance, i'm verry happy with it but, found out that there are few roms available.
The question is, what rom do you use and please give some detailes (power consumption, how smooth...)
CHEER'S

ovu85 said:
Hi, just bought a SGS Advance, i'm verry happy with it but, found out that there are few roms available.
The question is, what rom do you use and please give some detailes (power consumption, how smooth...)
CHEER'S
Click to expand...
Click to collapse
You do not have much of an options. There are 3-4 ROMs for our phone. It will not be too much to try, and see it yourself.
P.S. I use JetMOD.
Послато са GT-I9070 користећи Тапаток 2

What ROM I use
Well, as I am a noob at this site I've only used the Resurrection Pro ROM in my Samsung Galaxy S2 It's really smooth and has drastically improved my battery life from the Stock ROM.
Hope I helped
*EDIT*
Sorry, I thought you were talking about the SGS2. As you can tell I am a noob, please can you delete this post?
Thanks

ovu85 said:
Hi, just bought a SGS Advance, i'm verry happy with it but, found out that there are few roms available.
The question is, what rom do you use and please give some detailes (power consumption, how smooth...)
CHEER'S
Click to expand...
Click to collapse
Stock Jelly Bean 4.1.2 I9070XXLQ4.
Samsung Galaxy S Advance
Rom : Stock Jelly Bean 4.1.2 I9070XXLQ4
Kernel: CoCore E-4.4-TWRP
I Am WhAt I Am

I'm using Pure Vainilla but i'm waiting for a rom (obviously like everyone) that may have drastical battery improvements without discarding perfomance.
Sent from my GT-I9070 using xda app-developers app

Final Chuckybean with CoCore 5.0, great performance and great battery life!
Sent from my GT-I9070

frzek said:
Final Chuckybean with CoCore 5.0, great performance and great battery life!
Sent from my GT-I9070
Click to expand...
Click to collapse
No lags on menus and games using this ROM?

lsilvabr said:
No lags on menus and games using this ROM?
Click to expand...
Click to collapse
I use apex launcher and everything is so smooth. Games are working ok, played MC4 with solid performance, there were some lags, but not much.

Hey ! I have tried every single rom for JB which is out here. I'm most pleased with Chuckyrom as well as Supressed rom. Currently i'm with Chuckybean master rom V10 and with CoCore 5. The stats i get on benchmarks are great.
P.S I saw that you've just bought your phone. My concern is if you haven't noticed wheather it's i9070 or i9070P because if it's P nothing will work for you
Cheers :highfive:

JB JellyMod + CoCore Kernel
I use JellyMod 3.0 http://forum.xda-developers.com/showthread.php?t=2170925
Cocore Kernel 5.0 http://forum.xda-developers.com/showthread.php?t=2140597

I've just flashed yesterday!
JellyMOD 4.0 - http://forum.xda-developers.com/showthread.php?t=2170925
It was already with the Siri Kernel- http://forum.xda-developers.com/showthread.php?t=1931478
The smartphone is now more quickly when switching between menus and apps, more playable than 4.1 stock rom

lsilvabr said:
I've just flashed yesterday!
JellyMOD 4.0 - http://forum.xda-developers.com/showthread.php?t=2170925
It was already with the Siri Kernel- http://forum.xda-developers.com/showthread.php?t=1931478
The smartphone is now more quickly when switching between menus and apps, more playable than 4.1 stock rom
Click to expand...
Click to collapse
Owh...you're in jelly bean already?congratulation on your first cusrom rom!(assume your 1st cause i read that you just bought new phone ) by the way, im using JetMOD 3.1 SE :laugh:

lan83 said:
Owh...you're in jelly bean already?congratulation on your first cusrom rom!(assume your 1st cause i read that you just bought new phone ) by the way, im using JetMOD 3.1 SE :laugh:
Click to expand...
Click to collapse
Ow, thanx for the attention =]
I was with a Xperia Neo V before with a custom rom too and now with i9070, i've bought 4 months ago, i guess, xD. I was going to wait 'till the end of warranty but i just can't keep it with default rom and lots of bloatware!
BTW, i've downgraded to gingerbread last weekend, using stock rooted rom with the Cocore 1.5 mini kernel. I need to study and learn about the I/O schedules and governors, etc

I use JellyMOD 4.0 with ThunderZap 4.1 as Kernel. I very like the JellyMOD Design and the Ink effekt addon. This ROM is based on Chuckybean v9 an is very smooth and stable. The Battery Life is also ok.

R: [Q] What rom do you use?
I'm trying Chucky bean master Rom with Cocore 5.it seems to work fine
Sent from my GT-I9070 using xda premium

i have try all roms..but..only chuckybean final that i think awesome for my phone..:good:

MySimpleLife said:
I use JellyMOD 4.0 with ThunderZap 4.1 as Kernel. I very like the JellyMOD Design and the Ink effekt addon. This ROM is based on Chuckybean v9 an is very smooth and stable. The Battery Life is also ok.
Click to expand...
Click to collapse
I was using JellyMOD 4.0 with thunderzap too, but the phone was very slow to open basic funcions, such the phonepad or sms messages... Maybe doing somenthing wrong, I don't know.... LOL, but the rom was rooted too...

lsilvabr said:
I was using JellyMOD 4.0 with thunderzap too, but the phone was very slow to open basic funcions, such the phonepad or sms messages... Maybe doing somenthing wrong, I don't know.... LOL, but the rom was rooted too...
Click to expand...
Click to collapse
Same for me, so I changed to Chuckybean.
Sent from my GT-I9070

[Q] Best Kernel / Rom combination for the I9070

Hello,
So after getting some knowledge of the things (thanks Shut_Down :good, I was wondering which is the best combination for this phone?
Right now I am running the stock ROM and kernel.
Will the new official JB upgrade also change kernel or just ROM?
Since people here have already tried different combinations, which combinations have you found that give good, consistent and fast running?
Thanks!

R: [Q] Best Kernel / Rom combination for the I9070
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium

KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
chucky-bean v5 + cocore-E 2.9 nighly(CWM)

Chucky Bean v6; Cocore_E 2.9 CWM
Envoyé depuis mon GT-I9070

Well, I did't expect this...
Thanks for your replys!
Funny thing is that each of you have a different combination.
Any one actually did testing which combo is better? Or maybe i sould ask, why are you using he combinations you wrote?

KINGbabasula said:
I use stock ROM with thunderzap 3.5 kernel
Click to expand...
Click to collapse
Same here. Stock JB LQ4 + ThunderZap 3.5.

So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!

Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
So I am guessing I will upgrade to the stock JB ROM (till there will be a JetMod version of JB).
1) Which would be a better kernel set CoCore or ThunderZap?
2) I am right now still running the stock GB ROM.
What would be the right upgrade process kernel update then rom, or rom and then kernel?
The reason I am thinking kernel first is because I still don't have a custom recovery (using the stock brand) so i can't backup or load new roms.
What do you think?
Thanks!
Click to expand...
Click to collapse
Try both and see what firs you better. And about order, you can install ROM with temp. CWM, but I suggest you use permanent, with custom kernel. So first kernel, than ROM.
Sent from Galaxy S Advance

Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?

YMatrix said:
Thanks mate! Again you helped.
If I install the stock ROM will I be able to get it in my local language (Hebrew), or do I need to download a specific ROM that is already in my language?
Click to expand...
Click to collapse
Hm, on this Russian JB there is no Hebrew as I see. So if you want it you should wait for release for your country or any with your language.

shut_down said:
Hm, on this Russian JB there is no Hebrew as I see.
Click to expand...
Click to collapse
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language

YMatrix said:
Where is this information posted? Because I checked sammobile, and I couldn't even find the GB version of my language
Click to expand...
Click to collapse
we actually have the ROM in our phone bro!

Brainiac.shri said:
we actually have the ROM in our phone bro!
Click to expand...
Click to collapse
You mean that each ROM usually supports all the languages?

YMatrix said:
You mean that each ROM usually supports all the languages?
Click to expand...
Click to collapse
a lot. but in this case hebrew isnt listed sorry!

Before installing a ROM is there an option to view which languages it supports?

Одг: [Q] Best Kernel / Rom combination for the I9070
YMatrix said:
Before installing a ROM is there an option to view which languages it supports?
Click to expand...
Click to collapse
No, unless dev write it on its thread.
Sent from Galaxy S Advance

OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?

YMatrix said:
OK, Thanks.
Last question, when just changing kernel, do I need to do any wipes / resets (I have read about dalvik cache, factory wipes etc.) ? Or is that just for when installing new ROM's?
Click to expand...
Click to collapse
roms only.

Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..

Одг: [Q] Best Kernel / Rom combination for the I9070
Rahul125125 said:
Hey sir plz help me...
I have samsung s advance... i9070
I flash it with odin to xxlpz 4.1.2
But its has so many buggs so I go to Samsung care to flash it back to 2.3
But they are saying my binaries are increased... so need to change my pci or bord...
And when I try to again update to ddl4 fremware it shows successful but phone was not starting...
Plz help me out sir..
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2100642
Sent from Galaxy S Advance

[Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?

Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !

R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
Click to expand...
Click to collapse
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium

Bad-Pixel said:
Edit: ops I just saw you're not Italian
Click to expand...
Click to collapse
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).

R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
ThaiDai said:
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
Click to expand...
Click to collapse
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium

Thanks
Bad-Pixel said:
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for the answer ! I just installed successfully the Italian version of JB !
PD: No, i'm from Buenos Aires, But i'm an Italian Citizen, i have double citizenship...

R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium

Bad-Pixel said:
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I will keep that in mind... But i want to install CM10.1 in mi N7000, my cousin(he has a Galaxy S3 with Philz 4.88.5 and CM10.1) he recommended it to me... I really want the performance/interface given by CyanoGen Mod...
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?

R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
Click to expand...
Click to collapse
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium

Bad-Pixel said:
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Really? Maybe i read wrong ! But there is written that Philz 4.88.5 supports CM10.1 and GT-N7000...
Read This thread http://forum.xda-developers.com/showthread.php?t=2002953
Someone in http://www.Taringa.net recommended me to use Crash Rom with Philz kernel ! And not only one person did that !
What Do You Think? I'm very confused about Android(Kernel/Rom/Recovery)...
PD: I really miss my iPod Touch 4g ! iOS it's heaven for me hahahaha

R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
But dude, that topic is about the galaxy s3 (i9300) and talking about a custom recovery (with few words, the menu from where you install new roms or wipe your note) and not about a kernel. Plus, Dev Crash left our note community some months ago, and his last rom is a jb leak rom Samsung, so I don't recommend you to install it. It's too much old now. Btw, if you wanna some advice about all this story (kernel recovery and other maybe) I advice you to:
First search for some already opened thread, and if you will not any answer to your questions, open a new thread
Sent from my GT-N7000 using xda premium

Auch ! Sorry man ! I had a confusion !
But if you read the Thread there says that it's compatible with N7000... So, i can install Philz 4.88.5 Recovery on my Note !
Reading in the web i found a tutorial of the CM10.1 Official for N7000, i think i will use this ROM in my Note ! What do you think? Any advice?
In the page of CM i found the tutorial... I can't put the link here...
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?

I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
Click to expand...
Click to collapse
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH

nokiamodeln91 said:
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
Click to expand...
Click to collapse
I said Philz Recovery... With CM10.1 ROM and Kernel !

which Philz recovery are you referring to ? Temp one?

nokiamodeln91 said:
which Philz recovery are you referring to ? Temp one?
Click to expand...
Click to collapse
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?

MarianoQT said:
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
Click to expand...
Click to collapse
Dont you read? Phil touch recovery + stock kernel is only for touchwiz rom a.k.a stock rom. No cm9 no cm10 or cm10.1. If im not mistaken speedmod kernel is using phil recovery but no touch features it also for stock touchwiz rom. Correct if im wrong
Sent from my GT-N7000 using xda premium

struk in boot
Bad-Pixel said:
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.

altanole said:
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
Click to expand...
Click to collapse
Ok resolved
I installed philzkernal matching to my rom via Odin and now is all fine
Sent from my GT-N7000 using xda app-developers app

Hi, i am noob i need help

Hi, i am noob i need a help for upgrade and root my phone.
I am from Serbia and I have this phone I9070, Gingerbread 2.3.6 I9070XXLK2 and Kernel is 2.6.35.7-1211579
I want o backup my original kernel.
And how to upgrade on JB 4.1.2 + root + custom kernel, I heard that the i9070 works poorly on JB and has bugs and custom kernel can fix that i think
Which is the best version of JB for stability and performance without lag and bugs? Stock or custom?
Which is the best kernel for my I9070?
And how to root my phone?
Thanks

Myl0sh said:
Hi, i am noob i need a help for upgrade and root my phone.
I am from Serbia and I have this phone I9070, Gingerbread 2.3.6 I9070XXLK2 and Kernel is 2.6.35.7-1211579
I want o backup my original kernel.
And how to upgrade on JB 4.1.2 + root + custom kernel, I heard that the i9070 works poorly on JB and has bugs and custom kernel can fix that i think
Which is the best version of JB for stability and performance without lag and bugs? Stock or custom?
Which is the best kernel for my I9070?
And how to root my phone?
Thanks
Click to expand...
Click to collapse
Hello. I am from Serbia too, and there is another user with same name as you. I will send you on private message what to do. Tomorow evening. Just remind me. And you can ask me whatever you want. We have official JB firmware. With CoCore kernel it is good. And i will suggest you to use CM10.1 or Omni ROM.
Sent from my GT-I9070 using Tapatalk

shut_down said:
Hello. I am from Serbia too, and there is another user with same name as you. I will send you on private message what to do. Tomorow evening. Just remind me. And you can ask me whatever you want. We have official JB firmware. With CoCore kernel it is good. And i will suggest you to use CM10.1 or Omni ROM.
Sent from my GT-I9070 using Tapatalk
Click to expand...
Click to collapse
I send private message on you, but in my folder "sent items' have 0 messages. PM work in this forum?

Myl0sh said:
I send private message on you, but in my folder "sent items' have 0 messages. PM work in this forum?
Click to expand...
Click to collapse
Yes.. PM system works in this forum..
- You can send it again for confirmation, I'm sure shut_down won't mind
- There is an option to either save or not save your sent messages.. so maybe its set to "don't save"
Sent from my Calculator using XDA Premium

When I upgrade my android, did I need to calibrate battery, compass, or something? I read somewhere, some user have bad GPS signal in JB. My GPS signal on GB 2.3.6 is excellent. I dont want to lose my perfect GPS
Thanks

Myl0sh said:
When I upgrade my android, did I need to calibrate battery, compass, or something? I read somewhere, some user have bad GPS signal in JB. My GPS signal on GB 2.3.6 is excellent. I dont want to lose my perfect GPS
Thanks
Click to expand...
Click to collapse
Its not necessary.. I never did that and yet I've never experienced any issues like that.. you are only required to do it if in case you experience those issues..
Sent from my Calculator using XDA Premium

I successfully install JB and i use HarshJelly ROM v4.01
How can i fix Live wallpaper not working on HarshJelly ROM v4.01?
http://forum.xda-developers.com/showthread.php?t=2342314
I can't replay there coz i have only 4 posts
Thanks

Myl0sh said:
I successfully install JB and i use HarshJelly ROM v4.01
How can i fix Live wallpaper not working on HarshJelly ROM v4.01?
http://forum.xda-developers.com/showthread.php?t=2342314
I can't replay there coz i have only 4 posts
Thanks
Click to expand...
Click to collapse
I tried to set a live wallpaper on my phone , it is working, im on harshjelly 4.0 too. What kind of issues you have?

I always used well jelly bean with CoCore 8.2 kernel and ROM deodex without any locking

Charles Augusto said:
I always used well jelly bean with CoCore 8.2 kernel and ROM deodex without any locking
Click to expand...
Click to collapse
[email protected] said:
I tried to set a live wallpaper on my phone , it is working, im on harshjelly 4.0 too. What kind of issues you have?
Click to expand...
Click to collapse
I use CoCore 8.2 to.
Here is error..see screenshot
I did not install any live wallpaper coz i want to use stock live wallpaper.

Now i update my SGSA with CoCore 8.6 and update HarshJelly ROM v4.01 to V5 and i have same error

Myl0sh said:
Now i update my SGSA with CoCore 8.6 and update HarshJelly ROM v4.01 to V5 and i have same error
Click to expand...
Click to collapse
Have you done wipe cache and wipe dalvik cache?

shut_down said:
Have you done wipe cache and wipe dalvik cache?
Click to expand...
Click to collapse
I did wipe cache and wipe Dalvik cache and i have same error.
I just install live wallpaper from goole play and error is fixed