I installed pacman rom 4.3 and the phone gets realy hot and the battery is realy weak in a standart using (whatsapp and internet.)
What can cuse the problem and how to fix it?
Flash antoher kernel mayne and if i flash it wich kernel is good??
valery3212 said:
I installed pacman rom 4.3 and the phone gets realy hot and the battery is realy weak in a standart using (whatsapp and internet.)
What can cuse the problem and how to fix it?
Flash antoher kernel mayne and if i flash it wich kernel is good??
Click to expand...
Click to collapse
I have thier ROM aswell and find it good. Just a minor issue im seeknig an awnser for. Maybe you can see if you have same problem as me?
In settings, can you open up the PAC-man setting? Mine crash the settings... "Unfortunately, Settings has stopped".
However i have a custom KERNEL [KERNEL][AGNi][CM 4.2.2/4.3] 05-08-2013 AGNi pureCM v2.3.3a I9305 (ULTRA SMOOTH) and i have really awsome batterylife with it. But if i cant find fix for my problem i will probaly change ROM. :crying:
Poped said:
I have thier ROM aswell and find it good. Just a minor issue im seeknig an awnser for. Maybe you can see if you have same problem as me?
In settings, can you open up the PAC-man setting? Mine crash the settings... "Unfortunately, Settings has stopped".
However i have a custom KERNEL [KERNEL][AGNi][CM 4.2.2/4.3] 05-08-2013 AGNi pureCM v2.3.3a I9305 (ULTRA SMOOTH) and i have really awsome batterylife with it. But if i cant find fix for my problem i will probaly change ROM. :crying:
Click to expand...
Click to collapse
the settings works fine for me but i didnt flashed the agni kernel im didnt flash any kernel at all .. try do wipe and install the rom again without flashing the agni kernel..
valery3212 said:
the settings works fine for me but i didnt flashed the agni kernel im didnt flash any kernel at all .. try do wipe and install the rom again without flashing the agni kernel..
Click to expand...
Click to collapse
hmm... im really new when it comes to kernels... Dont i need a stock kernel to flash or kernels is includen in roms?
Poped said:
hmm... im really new when it comes to kernels... Dont i need a stock kernel to flash or kernels is includen in roms?
Click to expand...
Click to collapse
Kernels are included in roms
Poped said:
hmm... im really new when it comes to kernels... Dont i need a stock kernel to flash or kernels is includen in roms?
Click to expand...
Click to collapse
its come build in the rom i think its the stock kernel of CM you dont have to flash any kernel if you dont want to..
just reinstall the rom
JJEgan said:
Kernels are included in roms
Click to expand...
Click to collapse
Sweet. Thanks for letting me know that. Sadly i love the customization-options with other kernels.
Edit: And can i just re-flash the rom to get other kernel w/o wipe? I meen since its the same ROM only...
valery3212 said:
its come build in the rom i think its the stock kernel of CM you dont have to flash any kernel if you dont want to..
just reinstall the rom
Click to expand...
Click to collapse
Stock CM kernel, does that include customizations? Like cpu, UV, I/O and the ususal stuffs?
(and now i feel bad for basicly highjacking the thread... sry)
GOT it FIXED Thx everyone!
Related
hey guys!
I'm just wondering about the relationship among theese three beast..xD
for example, I've ICS Stunner and I tried to flash another kernel supposed to have BLN support..awesome! well..stuck at kernel logo..conclusion? happy wiping and reflashing (we are flashaholic, aren't we?! ). so I realized that kernel and rom must be compatible.
have someone managed to get BLN working on Stunner?
Xnnn!!! said:
hey guys!
I'm just wondering about the relationship among theese three beast..xD
for example, I've ICS Stunner and I tried to flash another kernel supposed to have BLN support..awesome! well..stuck at kernel logo..conclusion? happy wiping and reflashing (we are flashaholic, aren't we?! ). so I realized that kernel and rom must be compatible.
have someone managed to get BLN working on Stunner?
Click to expand...
Click to collapse
The only problem we have here is we dont have options in kernels that work on ICS. On GB roms we have fanco abyss etc kernels that support the rom and BLN app for notifications. That's why we normally use the abyss 3.9 kernel in recovery in ICS roms whenever we want to flash anything in recovery or revert to GB.
And as per i know there isn't any kernel that suppport ICS and also support BLN notifications.
thank you very much!
Xnnn!!! said:
thank you very much!
Click to expand...
Click to collapse
You are very welcome!! Hitting thanks button will also do
Hi, this is my first kernel, this based on the latest Ultima ICS kernel from riyal, with two minor tweaks
-now touchscreen reponse while swiping is 4px instead of 9px, so no more bumpy movements while draging items
-official "Sony Ericsson" boot logo
Information about the touchscreen problem (if you have not noticed it):
http://talk.sonymobile.com/thread/40474
the problem is present in latest FXP (but probably not in next's) and also in stock kernel ICS
The solutions was 99% done by nicklas lof, here:
http://review.cyanogenmod.com/#/c/22164/
Works in Stock ICS, 431 and 587, it should work with FXP releases too
Installation:
Flash kernel using fastboot
Flash original Riyal wifi Modules using CWM
Riyals kernel thread is here
I do not deserve any credits on this, I just moved a line in code to compile and changed logo. :good:
What is Stock ICS 538? or you mean 587
the recovery are same or did u update it too ?
I have to install the img with fastboot ... And I have everything right???
Thanks for this kernel. will give it try one of these days
New Kernel for PRO [MK16a/i]
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
[email protected] said:
Thanks dafsoftware :good:
So just to clarify. Everything is the same as Ultima ICS Kernel v1.4 with the changes you made for the touchscreen precision and SE-X logo. The WiFi modules to flash are also of the v1.4 too right?
I'll try this when you confirm my query, as I am running on the Stock ICS MK16a 4.1.B.0.587 (US) build. I'll try to post any issues that I come across after flashing
[email protected]
MK16a Rooted, BL Unlocked
Kernel: LuPuS-PRo-v3-LiNaRo
Stock ICS ROM .587
BB 77
Click to expand...
Click to collapse
You are right, this is based in Ultima ICS v1.4, in fact Riyal already has this in his sourcecode, so next's versión should already have this fix, you have to use v1.4 modules
lawong said:
the recovery are same or did u update it too ?
Click to expand...
Click to collapse
Recovery is the same
josejuangr said:
I have to install the img with fastboot ... And I have everything right???
Click to expand...
Click to collapse
After you flash the kernel you have to flash latest wifi modules from riyal, using CWM
Why now 4px? Was Gingerbread not 2px?
paul5425 said:
Why now 4px? Was Gingerbread not 2px?
Click to expand...
Click to collapse
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
I use this kernel with stock ICS 587 and my phone gets freeze every time I unplug from charger and PC.
Anyone has the same problem?
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
rajeshjamnadas said:
Can you please update stock kernel to use this fix.
Or give some link to add recovery to stock kernel.
Thanks,
Rajesh
Click to expand...
Click to collapse
This is based on latest riyal changes, I think it has voltages messed up, so I will have to build it from stock kernel someday. I dont know how to add recovery to it.
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
dafsoftware said:
I am, but not exactly when disconnecting the charger, only when its charging and very randomly, I think the source I am using has a messed up voltage table, I need to find the original voltage tables to fix it.
Click to expand...
Click to collapse
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
xperiap said:
omg so nice plzz make it bugfree and everybody will be happy! Currently using this in combi with ics Miui. Thanks alot bro for ur work!
If u need any donation or help i will be there.
hopefully u will add more things if u have the time:good::good::good::laugh:
Click to expand...
Click to collapse
+1
great kernel, thanks for your work.
also flashed it with MIUI ICS, feels smoother and fast.
thanks again.
dafsoftware said:
I think GB was 2px, but with the current driver is quite hard to tap on links at 2px, I will compile one at 2px if you want to try
Click to expand...
Click to collapse
OK - after reading more it sounds like there has been some structural change to the driver model (something that needs fixed at a deeper level). Anyway, it would be great if you could additionally provide us with a ROM set at 2px just so we can see for ourselves.
Ext4
Does this kernel support the Ext4 partition? Great kernel by the way...
Edit : and.... Swap partition?
Even better than that, I notice that the Touch Move app has a "tune" mode which allows the user to tune the sensitivity themself. It's currently only compatible with a couple of GSII custom kernels:
http://tegrak2x.blogspot.co.uk/2011/10/touch-move-tune-compatible-kernels.html?m=1
It would be interesting to see if we could get Touch Move Tune working on Xperia devices too.
Sent from my MK16i using xda app-developers app
I want to clarify if it ever works in stock kernel? because mine is not possible to unlock bootloader, I want to change my CUSTOM ROM from CM7 to ICS ROM. Many also ask if it ever works on STOCK kernel.
jepoy25 said:
I want to clarify if it ever works in stock kernel? because mine is not possible to unlock bootloader, I want to change my CUSTOM ROM from CM7 to ICS ROM. Many also ask if it ever works on STOCK kernel.
Click to expand...
Click to collapse
i dont think nAa will develop stock version
minicm 9,10 on stock kernel is impossible.
Its impossible to run CM9+ with stock ROM. it requires swap(I guess) and some tweaks + libs that requires with custom kernel.
Correct me if I'm wrong.
-HuntDX- said:
Its impossible to run CM9+ with stock ROM. it requires swap(I guess) and some tweaks + libs that requires with custom kernel.
Correct me if I'm wrong.
Click to expand...
Click to collapse
Yes you guess !
Man on stock it's just 165mb of ram,so we can't made cm9 for stock rom! On custom is 184mb!
Sorry bro, if u want ICS for stock kernel,
there is a one, but it has so many bugs. You can try that if u really want.
Good Luck
Sorry dude it wont.....our kernel dont really support ics...so....
NO....it wont..
Sent from my GT-S5570 using xda premium
If you want rom for stock kernel, only Gb not isc. :<
Sorry if this is a dumb question. I'm still learning about ROMs and Kernels.
Before I installed JB Ultimate N7000 XXLS7 Jellybean 4.1.2 v4, I had the Hydracore universal kernel installed.
The JB ROM comes packaged with its own kernel. Is there any reason why I should re-install Hydracore?Is there any advantage to doing this at this stage?
The only change I can see wanting to make to my phone in the foreseeeable future is to try out the official Sangsung Jellybean ROM when it finally gets released as this may include features or apps not in the 4.1.2 v4 and I would like to compare.
Thanks and reagrds
Trevor
which version of Hydracore were you refering to ? if it is compatible with LS7 ( not too sure about that) then the OC version of it will give you the ability to overclock if you are a fan of that feature.
most continue on Phillz ls7 kernel, its the only one which allows the multi-window feature in ls7 to work
hydracore is not compatible with any leak jb based roms. install only if you want your phone not to boot
Many thanks for your reply.
The zip file I have is GL_HYDRACORE_v5-4_STD.zip.
Since, I've no interest in over clocking, it doesn't sound as if there is any reason to re-install this Kernel and nokiamodeln91 says it will cause the phone not to boot anyway.
I just thought having read the claims made by the develope about it being compatible with ANY ROM and all that, that it might offer some advantage if I want to change ROM later.
You mention Phillz Is7 kernel as the only one allowing the multi-window feature to work. Didn't know I hadn't got MW (Duhh!). So would you recommend installing that to make that feature work? I'll do some reading up about that kernel after this.
Thanks again.
Trevor
rraaka said:
which version of Hydracore were you refering to ? if it is compatible with LS7 ( not too sure about that) then the OC version of it will give you the ability to overclock if you are a fan of that feature.
most continue on Phillz ls7 kernel, its the only one which allows the multi-window feature in ls7 to work
Click to expand...
Click to collapse
sacentre said:
Many thanks for your reply.
The zip file I have is GL_HYDRACORE_v5-4_STD.zip.
Since, I've no interest in over clocking, it doesn't sound as if there is any reason to re-install this Kernel and nokiamodeln91 says it will cause the phone not to boot anyway.
I just thought having read the claims made by the develope about it being compatible with ANY ROM and all that, that it might offer some advantage if I want to change ROM later.
You mention Phillz Is7 kernel as the only one allowing the multi-window feature to work. Didn't know I hadn't got MW (Duhh!). So would you recommend installing that to make that feature work? I'll do some reading up about that kernel after this.
Thanks again.
Trevor
Click to expand...
Click to collapse
Which kernel you are currently on? If you haven't installed any kernel manually, that means you already have Philz kernel, which comes by default with Ultimate JB v4..
Yes, of course, you're right. I just didn't recognise the name of the Kernel. Sorry.
Shyam said:
Which kernel you are currently on? If you haven't installed any kernel manually, that means you already have Philz kernel, which comes by default with Ultimate JB v4..
Click to expand...
Click to collapse
check out the multi-window feature which is the hallmark of ls7 , some ls7 rom OPs have videos on it , learn how to enable it. its KEWL
Thanks. All working fine.
Hey,
Whenever I try to flash another kernel which is required to flash a new rom to my SP, everything works just fine. Except that when I finish the flashing and boot up to the ROM, the screen seems to flicker a lot...
I tried turning auto brightness off, flashing another compatible kernel, and flashing a couple of scripts that claimed to fix the issue...
I am currently at the stock firmware, rooted and with unlocked bootloader.
What is weird is, when I flash the stock 12.1.A.1.205 firmware back...the screen stops flickering.
Any ideas?
Thanks in advance
LoizosAristides said:
Hey,
Whenever I try to flash another kernel which is required to flash a new rom to my SP, everything works just fine. Except that when I finish the flashing and boot up to the ROM, the screen seems to flicker a lot...
I tried turning auto brightness off, flashing another compatible kernel, and flashing a couple of scripts that claimed to fix the issue...
I am currently at the stock firmware, rooted and with unlocked bootloader.
What is weird is, when I flash the stock 12.1.A.1.205 firmware back...the screen stops flickering.
Any ideas?
Thanks in advance
Click to expand...
Click to collapse
it is bug cm11 kernel. (cm kernel based 12.1.A.0.266 kernel …=> flickeris bug
win32r said:
it is bug cm11 kernel. (cm kernel based 12.1.A.0.266 kernel …=> flickeris bug
Click to expand...
Click to collapse
It's not only the cm11 kernel, other kernels like DooMLoRD kernel, which is based on the stock fw also has this problem..
Are you saying that I use a lower firmware kernel on a newer firmware?
LoizosAristides said:
It's not only the cm11 kernel, other kernels like DooMLoRD kernel, which is based on the stock fw also has this problem..
Are you saying that I use a lower firmware kernel on a newer firmware?
Click to expand...
Click to collapse
DooMLoRD kernel based 12.1.A.0.266.
I advise you use cm11 for LBL + wiliams kernel v7.. => no flickeris bug
win32r said:
DooMLoRD kernel based 12.1.A.0.266.
I advise you use cm11 for LBL + wiliams kernel v7.. => no flickeris bug
Click to expand...
Click to collapse
Oh I didn't know that it's based on the .266
Thanks man, I hope Williams kernel works
win32r said:
DooMLoRD kernel based 12.1.A.0.266.
I advise you use cm11 for LBL + wiliams kernel v7.. => no flickeris bug
Click to expand...
Click to collapse
Ok so I should've mentioned that my bl is unlocked...
Also, williams kernel v7 is for 4.3...
I'm trying to flash cm11, for cm11 there's williams kernel v4...
I tried both the stock cm11 kernel and williams one and they both gave me flickering screen...
Any other ideas?
LoizosAristides said:
Any other ideas?
Click to expand...
Click to collapse
add to build.prop this lines:
Code:
# System property for cabl
ro.qualcomm.cabl=0
win32r said:
add to build.prop this lines:
Code:
# System property for cabl
ro.qualcomm.cabl=0
Click to expand...
Click to collapse
Can you tell me what does it do?
LoizosAristides said:
Can you tell me what does it do?
Click to expand...
Click to collapse
It is fix flikers bug! :laugh:
win32r said:
It is fix flikers bug! :laugh:
Click to expand...
Click to collapse
Hmm I'll try it tomorrow
Thanks for helping me dude...
Forget it)
win32r said:
Forget it)
Click to expand...
Click to collapse
Ok so I tested it out today...and it doesn't work
I am now convinced that it's a kernel problem, since I tried a lot of different versions of cm11, but I also used 4 different kernels, each one at the latest version, NOTHING!
Any other ideas?
LoizosAristides said:
Any other ideas?
Click to expand...
Click to collapse
Hm... I don't know..=( sorry
I tried to write in support of the CM. But the answer is no.
win32r said:
Hm... I don't know..=( sorry
I tried to write in support of the CM. But the answer is no.
Click to expand...
Click to collapse
That's ok...
Thanks for your time anyway
As win32r said, you should try a cm11 based ROM but for locked bootloader (they work for ubl too). With these roms you can use a kernel based on stock ( for example stock kernel or Williams kernel Sony version) which should fix your issue.
All roms that are for LBL will work with the stock kernel or Williams kernel v7. I wrote something about this in the Williams kernel website : http://williams-kernel.tk/help.php and I'll probably write this info on xda too if I have some time.
Wow. Apparently, your kernel is the only one that that doesn't give me a flickering screen
I tried an unofficial cm11 build along with it and it worked like a charm!
I just can't thank you both enough...
Finally I got a fully working cm11 on my SP