Database Develop

[Q] And USB adapters for the DS7 yet? So we can hook up controllers etc.

Just wondering, since some of the newer tablets let you hook up mini usb devices to it and so. Was wondering if there had been any adapters yet or so for us streak 7 users? Would be cool to get a wired controller hooked up and so.

You would need an OTG cable to do that, as dell doesnt make any you will have to make your own or use the HDMI dock.

Well I have the HDMI Dock, so I could use the dock then insert the usb device to that? Was thinking about getting that Logitech F710 with that usb dongle, heard it had support for android. What else would I need? Or hows that work fully.
As for the non dock part, has anyone made a cable yet to work?

if your device had a usb-a connector you have no choice then but to make a cable.
the sixaxis/ds3 uses a mini usb connector and might work though usb,
I know it and the wiimote will work over bt, with the wiimote being the easier to pair one.

Well I have the wiimote working fine, Issue there is.. Yea.. Battery drain on that remote. So figured maybe getting a adapter. I guess I need a USB to Mini micro usb? (The new style mini usb thing.. man I miss the old big RAZR size ones) How many of you have used a HID device or so on android or the streak 7?

you'd need to splice together the dock connector to preferably a USB-A female port, it'd be the most useful as you'd have a cable that could accept anything, but it'd mean you'd always need a minimum of 2 cables.
You'd also have to dissemble to dock connector itself i believe as the OTG pins are different from what's wired in the normal sync/charge cables, you cant simply cut the cable and rewire it, you'd prob have to cut the dock connector open and resolder
If you made a dock to micro usb connector it'd only accept devices that have a micro usb port on it.
Keep in mind usb mode means that the controller would be drawing power from the device itself, while controllers dont draw that much, it's still something to point out

Wouldnt this be all I need?
http://www.amazon.com/USB-Female-Mini-Male-Adapter/dp/B0016RNX2I/ref=pd_sbs_e_4
Would take the normal size usb dongle or cord, fits into the USB slot of the dock itself.

I havnt actually tried it but it sounds like that should work, i know that port is designed for otg connections so i'd assume it'd take care of the hard work.

When on 2.2.2 Did I need a special program for this to work? I know 3.x had native support. Just wondering. =) (Or can any game/emulator with key remapping auto detect)

if it's anything like the hoops needed for the s5 on 2.2.x yes, unless dell included their own code stuff to make it work, then i'm not sure.
I've never attached a controller to anything, wired or not so I can only say that much

Wonder what the app would be called or so, anyone know? I mean I ordered the part, should be here in a few days, then I can report any tests I have with a Rumblepad 2.

Ok tested it out, So far nada. Dont know if its even supposed to work.
Has anyone here hooked a wired controller up to their android? Running Honeycomb now too.
I know people talk about the F710, which I wonder if that works cause its battery powered?

So what's the verdict guys? Can a controller or other USB device be connected to the mini USB port on the docking station and work? If not, will it work if you plug in a mini USB OTG cable (like this one http://www.ebay.com/itm/Mini-USB-Re...757?pt=LH_DefaultDomain_0&hash=item3a6edf5335) into the docking station and then plug the controller into the OTG cable?

So far my verdict is nada.. dont think its supplying power to the usb ports. Now its been said that adapter based ones may work, something where controller is powered by batteries. Tho again. No one ever gives a real confirm.
My next area to branch out is http://www.onlive.com/controller 50$ but you can use a adapter for the pc. However it also works with bluetooth, something that the tablet DOES support and no adapter needed. Since I have the onlive app, least it will work 100% for THAT. Once my tax money comes in, Ill order the controller and see if it can work on emulators and so too. least then we will have 1 solid answer that has some good use. (Since honestly, onlive on the tablet really isnt bad at all!)

Why not bluetooth your ps3 controller though the sixaxis app on the market thats what I've done works great
Sent from my Dell Streak 7 using xda app-developers app

I have used my Wii remote that way
Sent from my Nexus 7 using Tapatalk 2

To answer both. If I am not mistaken. PS3 controllers have to be "paired". Which means when you wanna play PS3 or Tablet.. got to re-pair them all the time, correct?
Wii-Motes I know you dont have to re-pair them. However.. one thing I hate... that to use the classic controller.. you need to have the Wiimote laying around somewhere.. then the cable for classic. Seems bulky for normal use.
Both controllers all are battery too. Would be nice for wired solutions. If I do anything wireless, I may as well get that Onlive controller with BT support.

If you have a sixaxis/DS3 dedicated to non-ps3 use: you only have to re-pair it every time you want to use it on a different device.
The sixaxis/ds3 do work in usb mode, at least on pcs. I dont recall if there's a solution to use it in usb mode on android (though i'd imagine it should, as usb mode is trivial to enable)
If you only have a single device to use it with, you only ever need to pair it once and then you're done.

Well, I finally went and tried hooking up a usb hub to my S7, and my results were absolute failures.
I bought an OTG <-> dell 30 pin a while back and a standard OTG <-> dock cable.
I dont have a baseline as I dont know offhand which kernels are specifically tested to work.
It seems to enable the hub (by enable I mean it powers up on detection of a host, it's wall powered)
on my S5 with ICS/Phoenix kernal (which is known to support usb hosting), but nada on my S7 with ICS B4/mod and stock 514.
Can anyone explicitly confirm that the b4 and stock kernals work with host?
I'm pretty sure nothing is happening on either of those, and as it works fine on my S7 it's definitely not bad cables/hardware.
Edit: at least the S5 is even capable of powering the hub itself, and with a dock it can charge at the same time. If it wernt for the terrible HDMI out on it, it would be a full on android pc with the dock.
The S7 on the other hand: I still cant get anything, remotely powered or self powered: it gives no response

I can tell you, yes, ICS kernel does have otg drivers but may not provide power to those devices.
Sent from my Nexus 7 using Tapatalk 2

[Q] MHL video and USB OTG at the same time?

I'm hacking a portable USB keyboard (from HP iPaq) to work on my note and planning on including USB hub, battery power pack, USB port for flash drive.
I'm also planning on adding HDMI out. I'll either include a switch to go between USB (keyboard etc) and video only or if I can have everything then this will become my "turn Note into a computer" all in one solution when plugged into HDMI monitor/television.
All the pins are there. But I don't know if MHL and USB can be used at the same time. Anyone know or do I have to try it and see what happens?
Blowing up my Note USB chip would not make my day! LOL

PurpleMelbourne said:
All the pins are there. But I don't know if MHL and USB can be used at the same time. Anyone know or do I have to try it and see what happens?
Blowing up my Note USB chip would not make my day! LOL
Click to expand...
Click to collapse
Sorry to rain on your ideas for the second time but not possible. Even if the logic were there to somehow implement both modes, there just is not enough bandwidth on those wires. You only have two twisted pairs and 1080P needs almost all that bandwidth to push enough ones and zeros to fill the screen at 25-30fps.
Your best bet for satisfying that fantasy is bluetooth keyboard and mouse. Think I saw a youtube video yesterday of a guy playing a game through MHL out while controlling through a bluetooth keyboard.

They are mutually exclusive connections at the hardware level, so no software mod can make this possible.
Bluetooth keyboard and mouse are great - check out my youtube channel "AndroidNZ" for a demo on MHL and various uses.

I was already impressed a while back by your video showing MHL video and so I went and bought a connector of my own on ebay
My main focus is to make a little do it all dock for sitting having lunch in a cafe. All built into a wired HP iPaq keyboard. I currently have a Dell Axim bluetooth keyboard and Logitech bluetooth mouse, but they aren't as smooth as I'd like. But the mouse is probably only useful when using a big screen.
So hardware hacking time!
But even if I can't do both, it will be nice to have my phone sitting next to the television with only a short HDMI lead and the phone doesn't flop around because of the stiffness of said HDMI cable as it does currently with my existing octopus setup of leads.
So it will have two modes.
Video mode where the keyboard only acts as a stand, battery pack and video port.
Cafe mode where I have keyboard with stand, USB flash drive, battery pack and USB.
All in a 15cm x 10cm x 2.5cm tidy expanding package :-D
Maybe when the Note 2 comes out with USB 3 we might be able to have both video and USB

oops, duplicate

MHL + OTG Multimedia dock is now available!
Heres the answer to your mhl + otg problem guys but a bit costly!
http://www.ebay.com/itm/Original-Sa...axy-Note-2-N7100-EDD-S20EWEGSTD-/230889526839

who can read is in advantage
this dock station is for the note II and not for the note I.
The pinout is different.
but 1 solution could be plugging in otg then usb hub then the micro usb female to usb A then the Mhl adaptor and the other connector of the hub with the mouse and the keyboard
http://de.focalprice.com/CA0352B/USB_A_Male_to_Micro_USB_Female_Adapter_Black.html
but finally i think it won´t work because there is not enoug voltage and power to get all devices so u need an external power supplier for the hub or an battery connect with the hub. try it out and tell us of your experience
)
alz_uk said:
Heres the answer to your mhl + otg problem guys but a bit costly!
http://www.ebay.com/itm/Original-Sa...axy-Note-2-N7100-EDD-S20EWEGSTD-/230889526839
Click to expand...
Click to collapse

[Q]Howto connect the i9000 to the pc screen?

Hi guys,
been a passive viewer in the xda forums for a long time but never posted anything, so be easy on me - It's my first.
I would like to connect my galaxy s i9000 to the pc screen.
I know there's the TV out option, but it involves a 3.5" to RCA cable, and pc screens don't have RCA jacks.
Does anyone know of a way to do this? and if you know what kind of cable is required that will be great.
I'm using the CM9 rom, build 17 from theam hacksung.
Just to clarify, I want to connect to phone to the PC so I can view the phone on the PC screen.
Thanks in advance

Short answer is you can't.
Longer answer is you might.
Your monitor doesn't have RCA connectors but if you have a tuner installed inside your PC, you might be able to connect it to that and then use the software that came with the tuner to display it onto your monitor.
Another method would be to use a RCA to whatever input your display has converter but they are are usually pricey and after a search for RCA to HDMI/VGA/DVI I don't think they really exist.
Even if there was a 3.5mm to HDMI/VGA/DVI cable, it wouldn't work unless the display was designed to take a PAL or NTSC signal through those types of connections.
With cm9, you need to have 3.5mm to RCA cable plugged in then go into System Settings>Advanced>TV Out. The option is greyed out when no 3.5mm to RCA cable is plugged in and the option has to be checked every time you plug the cable in.

Thanks for the reply,
I knew about the tv-out option, but didn't think about using a tuner - that might work!
Another question, do you think that a micro usb - hdmi cable might work?
I saw a while back that samsung offered such a cable that was designed for that purpose exactly.
I've searched a lot of forums but havn't got a clear answer if this actually works, not have I seen a youtube video demonstrating this.
Does anyone know if using a micro usb - hdmi cable wokrs?

jons753 said:
I knew about the tv-out option, but didn't think about using a tuner - that might work!
Click to expand...
Click to collapse
Do you know what tuner you have? I'm not sure if yours will have it but there will be a yellow plug like the ones you find on a TV.
I'm %99.9 sure that the I9000 doesn't have HDMI out through USB. It would seem a bit excessive to have two video out ports. Although you did spark an interesting subject, if someone could whip together drivers to work with something like this we could potentially have HDMI through USB but I don't see it happening any time soon.
Here's another way to view your phone through your PC: http://mymobiler.com/

Samsung Smart Dock HDMI not working. ARGH!

Hi all,
I know there have been other postings regarding this, but none have helped me solve my situation:
I have a "stock ROM" AT&T Note 2, and have tried two different Smart Dock units from Fry's. I get NO usable HDMI signal from either when connecting to my ASUS V228H monitor; the HDMI cable/monitor have been checked as working by connecting my DVD recorder up and successfully playing video content. USB connections to a wired keyboard and mouse worked well on unit #1, for some reason not on unit #2. There was no improvement when I rebooted the phone into safe mode. Lastly, the phone is correctly recognized by a PC when connecting via USB (MTP mode).
I'm ready to scrap the whole Smart Dock idea and instead buy an MHL-to-HDMI adapter and bluetooth keyboard/mouse combo, which I think can be found with total price just around that of the Smart Dock... unfortunately, I guess there's no "splitter" that could let me hook a hard drive up as well, like I could with the Smart Dock.
Does anyone have any ideas? I of course would hate to have to hard reset the phone, but might do it if there's really a good chance of it helping.
Final question: is it possible that the microUSB connector at the base of the phone could get damaged in such a way that USB to PC connections work, but MHL video does not?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

did you plug the dock into an original Samsung charger?
did you reboot?
mhl takes a lot of power, so you need to have the charger plugged in to make it work.
and the usb port can get stuck in a certain mode if you've used it too much without rebooting, a simple reboot will reset it.

I am using the new micro-USB to USB cord connected to the wall charger (FYI, plugged into a power-strip, not directly into a wall outlet, would that actually lead to MHL getting too litle power?). The phone was recently rebooted. I have typed this response using a USB-connected mouse, so at least that's working. HDMI is STILL not working.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

I'm guessing that unless it's specifically stated for the gn2, like the samsung dock, the microusb connector is using 5 pins instead of 11. That's the issue you'll have with mhl adapters, too: find an 11 pin, or buy the 5-> 11 adapter.
If it says compatible with the note (not note2) or evo, that's a pretty solid guarantee it's using 5 pins.
-----
I would love to help you, but help yourself first: ask a better question
http://www.catb.org/~esr/faqs/smart-questions.html

in this case the amount of pins is irrelevant. (edit: unless you didn't get a note 2 smart dock)
have you tried a different screen/TV and cable?
there are multiple versions of HDMI, and your cable or screen may be sufficient for an old DVD player but not a newer device.

Interesting that nowhere on the Smart Dock's box does it say "compatible with Note 2". But looking up the part # on the Samsung.com accessories site yields the following description:
Smart Dock Multimedia Hub
EDD-S20JWE
Compatibility: Galaxy Note II and Galaxy S4
As for HDMI protocols changing over time leading to incompatibilities... WTF? They don't need to create specification version numbers like USB to clue the user in? I will test your theory with an MHL to HDMI dedicated connector purchased today. If you're right, even this device won't work with my monitor...

This is going to sound like the annoying tech support people on the phone but... are you sure everything is plugged in tight?
I only ask because when I first got my smart dock I was getting picture but no sound with my hdmi cable and I was about to try a different cable but decided to try replugging everything first and voila...it started working!
It didn't make sense to me because it must be plugged in if it's working even a little but apparently either the phone wasn't docked all the way or more likely I hadn't pressed the hdmi cable in enough.
Would be nice if it's that simple in your case. Good luck!
Sent From My Ginormous Note 2

Thank you for the suggestion. Yes, I had tested the Smart Dock's connections to make sure all were tight. No improvement.
I have given up on the Samsung Smart Dock for now. A "rig" that appears to be working is as follows:
1) Cirago MHL1000 MHL-to-HDMI adapter.
2) Mobile Phone->Voyage adapter (Micro 5 pin to 11 pin)
3) Comkia 3 foot HDMI cable.
4) ASUS VE228H monitor
5) HYPE Bluetooth Curve optical mouse
6) SMK-LINK Versapoint Bluetooth Slim Keyboard
You are definitely right about needing to check on the connection status of the various connectors. I periodically lose the HDMI video signal, which requires that I press the MHL adapter's plug tighter into the 5-to-11 pin connector. Yes, I also have the case off the Note II when attaching everything.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app (using the rig above).

Okay, I'm noticing that the HDMI signal gets lost every 5-10 minutes and blacks out the monitor for 5-10 secs. I also have been having the issue of definitely less than 1080p output (not sure if even 720p) except for video player and Angry Birds Star Wars which do look good.
Is this a problem of the Cirago MHL1000 plus 5-> 11 pin converter, which would be solved if I just spent some more bucks on a Samsung HDTV cable with 11 pins? Will the Samsung MHL 2.0 cable for the S4 provide better output for a Note 2 than the Samsung S3/Note 2 cable?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

Okay, I sucked it up and bought the Samsung MHL 2.0 HDTV cable for the S4 and backward compatible with the Note 2. I think I've gotten things as good as it's going to get. Video out is stable and actually at higher resolution than using a Cirago cable and a 11 to 5-pin converter.
I unfortunately have no USB input capability for hard drive access. Is there any adapter to insert in the "circuit" to let me attach a HD to the Note 2 if its MicroUSB is already occupied by the MHL to HDMI cable?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

hi
Hello, I have a problem when connecting a peripheral (mouse, keyboard, etc) the screen automatically flips and turns black, saying, which it is connected by hdmi too. that's not right.
otherwise it has explain, does not leave me connect the mouse and keyboard, because the s4 assumed that this also connected the hdmi.

USB-C hub for Razer Phone 2?

Looking to find a USB hub for my phone. I see a ton of them online, and some of them even kinda say they work with phones. But I know not all of them do. Looking for one that can output HDMI and has at least one USB-A input (two would be nice, but not a deal breaker). I do realize it'll probably require PD input, that's not a problem. [email protected] would be my preference too as a minimum. The goal is to use my phone as a portable gaming device, so I'm hoping to have low input lag for the wired controller.
My hope is somebody has found a decent one that they've tried with this phone and works. Would also accept testimony from people who have tried it on the V30, or any other flagship USB-C Android phone that isn't Samsung (they use DeX, I need no feedback on that).
So... Anybody got any personal experience to share on this topic? Realize it's kind of a tall order, but I'm hoping somebody has found one that works and is reasonably priced.

I too would like to know this if anyone has some info on it. At the moment i have tried 2 different docks, the Alogic USB-C Dock Plus which is just plain **** to say the least, if you connect the charger and HDMI it will eventually crash the systemui freezing you completely. The other dock i have tried is a Satechi Slim Multi_Port Adapter which works to HDMI but does'nt charge the device at all even though it has a charger slot for it & chargers my other phones fine plugged in via the same cable.

MS Display Dock
I have used a Microsoft Display Dock, has 2 USB A-Ports, HDMI, DisplayPort, & charges simultaneously. The Razer Phone work fine with it (TESTED), but honestly the phone seems to be capable of being compatible with any Hub save the ones for the Nintendo Switch. Being that the Microsoft Display Dock is discontinued & old, you can probably find good bargains from 30$ or more. While it is name brand and, from personal experience, its a well built piece of tech, you might want to consider how you plan to listen to your device, and think about adapters with Aux-out if you plan to used wired headphones.

I was goofing around at work and we have these USB c travel adapters that have a USB, HDMI, Ethernet, and vga out, but can't charge at the came time. Upon further goofing around I plugged in Dell WD15 dock, bingo, full output on everything. Comes with a charger so it charges, Ethernet, display port, vga, USB ports. They run about 130 on Amazon right now. Plugged in our projector to it, then some external speakers, Bluetooth my gamepad to it. Loaded my some emulators and I was playing Mario kart while taking some support calls.