About 5 months ago my mom bought a kindle fire hd, she has been loving it...
I rooted it and set go launcher ex as the default launcher, and as far as I know she has never had a pin number or parental controls password set up, just her @kindle.com account.
But now, all of a sudden, her kindle will not let her connect with wifi, uninstall, install, update, or do anything really because it keeps on asking for a parental controls password.
She swears up and down she never set a password. We have tried her amazon password, and any pin numbers she might have once used... all to no avail.
I've already done a bit of google searching and the only solutions I can find are to deregister it from her amazon account, then reregister, or factory reset. I really don't want to have to factory reset.
But when she signed into her amazon.com account there is no kindle listed?? Is there even such a thing as an @kindle.com domain? This is really frustrating me and I just want it to work.
Thanks.
more
I've done quite a bit of reading up online.
If she doesn't know her password, factory reset is the only way?
I was hoping I would be able to go in with root explorer and change a permission to disable the parental controls that way. Is there really no file I can go in and change?
update
OK I went in with x-plore file manager and renamed parentalcontrols.apk and parentalcontrols.odex to .bak, and rebooted.
No longer getting parental controls warning asking for a password when I touch to connect to wifi... however... the wifi button doesn't work now, it just stays on "off".
Even when I try to end around to get wifi working by going through an app, it'll just load forever and never let me connect to wireless.
I am positive there is more to be done, but I am far from an expert and I really would like to have a little advice.
U might fix it by deleting the folder that parental control uses in /data/data, not sure exactly which one it is, but it probably says something like com.amazon.parentalcontrols or something. I'm pretty sure doing a factory reset will also do it, just backup the data off your data folder first if you have any settings for things u want to transfer over. Hope this helps, I don't use kindle os so I can't figure out what the parental controls internal name is, so sorry I can't be of more help in that area.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
stunts513 said:
U light fix it by deleting the folder that parental control uses in /data/data, not sure exactly which one it is, but it probably says something like com.amazon.parentalcontrols or something. I'm pretty sure doing a factory reset will also do it, just backup the data off your data folder first if you have any settings for things u want to transfer over. Hope this helps, I don't use kindle os so I can't figure out what the parental controls internal name is, so sorry I can't be of more help in that area.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app
Click to expand...
Click to collapse
TY, I needed something like this to point me in the right direction, appreciate it.
She took it home with her today so I probably will not get to touch it for the next week or so, but I will check back and let you know if that fixes it.
Related
I had 2 Nook Colors I bought Friday. Today I have successfully set up one with 1.1.0 and autonooter'd using 3.0. Followed instructions and everything works as assumed.
On the second nook (wife's), I can load Autonooter, but when I get to the YouTube part, it has a network issue. I then try and go to GMail and it says the account is not set up to sync, but where it wants me to set this up is not a settings option in Nook Color Tools or anywhere I know.
I've had to reset this device twice back to factory settings. Can someone give me an idea on what I can try to do this differently?
I tried a third time by setting up the Google Account at the account setup screen during setup, but still have the problem. Seems that there is some GSM settings popping up on this device.
Wife is not happy that my NC can be rooted and her's cannot. I'm to the point of returning hers and getting a new one.
So, her device works fine as-is before trying to root it? Wireless is fine, connections are okay, browser works, etc?
I'd say double-check that you're actually on 1.1.0 if you're using the noot for 1.1.0, or maybe wait for the real Auto Nooter to see if that works better.. Should be out in a day or two hopefully.
Yeah, her device works fine stock. I have flashed it back to stock 1.0, stock 1.0.1, etc. each time doing a sideload update to 1.1.0. I then used the Autonooter for 1.1.0 and I keep getting some issue with setting up her gmail account on the phone.
If I try and set it up during the Android Setup, it loops and simply makes me set it up again. Otherwise, if I skip...I get asked to set up gmail account when trying the YouTube My Channel portion of the setup. I get the network error there.
What I have noticed is that when setting up the account on the Android Start-up section, it gives me a notification of sync/connections, but the account does not setup to sync. This is the problem - I can't find where to make the account sync or complete setup with the Autonooter I guess.
Like I said, my Nook works fine and was the first one I did. I followed the same procedures on her's and it is the same issue each time.
Disclaimer: She doesn't use the Gmail account much, but I logged into on PC. Not sure if that is a factor.
Thanks for your feedback!
lxadoz104 said:
Wife is not happy that my NC can be rooted and her's cannot. I'm to the point of returning hers and getting a new one.
Click to expand...
Click to collapse
Best advice I can give (though it seems one device may have something goin on for sure) is that you earn some brownie points and give her yours and get yourself a new one! Amazing the future favors returned by an action like this, hehe.
Great idea. Where can I adjust the account settings for her account in place of mine? (Google account)...Thanks.
lxadoz104 said:
Great idea. Where can I adjust the account settings for her account in place of mine? (Google account)...Thanks.
Click to expand...
Click to collapse
Both my wife and I use same account for the Market (really don't like paying twice for apps...we do the same for purchased books from kindle / B&N)...you can add / remove google mail accounts from inside google mail settings. Just click ADD ACCOUNT, and disable yours (or at least disable sync).
**Disclaimer** Sharing apps across multiple devices in the same household is smart, and not a slight to developers at all. We purchase apps and books, and both use them...that's called economical
Oh also.be sure to check out these cases for your new toys! We both have them, and they're perfect!!
http://forum.xda-developers.com/showthread.php?t=934081
Have you tried just doing it from 1.0.1? Is there a specific reason you want to be on 1.1.0?
lxadoz104 said:
.I get asked to set up gmail account when trying the YouTube My Channel portion of the setup. I get the network error there.
Disclaimer: She doesn't use the Gmail account much, but I logged into on PC. Not sure if that is a factor.
Click to expand...
Click to collapse
Is her G-Mail account linked to YouTube? This is a pre-requisite. Good Luck!
The easy (but time consuming) fix for this is to downgrade to 1.0.0 or 1.0.1 (make sure the downgrade was successful via settings-device info-about or whatever it is.) Then use one of the older auto-nooters to noot that version. From here, if you still would like to have a rooted 1.1 ROM, install rom manager from the Market and use it to flash the 1.1 pre-rooted ROM from the dev section. This would be the best way in my opinion.
I have searched and read questions from other people looking for the answer, but can't find a solution. I am passing on my Nook Color to a friend, and want to delete the gmail account I used to set it up when I got it. I can't get rid of it without restoring it to default, which I hate to do and get rid of a lot of good apps.
I have added a new gmail account, thinking that would satisfy the android beast, but I still can't remove the original one. I have cleared all data in all apps (there is no "gmail" or "google apps" listed in my apps, like some people say to look for).
Someone suggested renaming or removing the accounts.db file, but then someone else responded saying that had messed them up.
Any other solutions or suggestions. Thanks very much for any help.
I'd like to know if this is possible too. I noticed on my TouchNootered Nook Touch that there is an app called DeviceRegistrator or something like that and it lets you change the reg info I think without wiping the device (correct me if I'm wrong please). Can this be used with the NC?
Sent from my NookColor using xda premium
This thread has a few methods: http://forum.xda-developers.com/showthread.php?t=1107650
kat3k said:
I have searched and read questions from other people looking for the answer, but can't find a solution. I am passing on my Nook Color to a friend, and want to delete the gmail account I used to set it up when I got it. I can't get rid of it without restoring it to default, which I hate to do and get rid of a lot of good apps.
I have added a new gmail account, thinking that would satisfy the android beast, but I still can't remove the original one. I have cleared all data in all apps (there is no "gmail" or "google apps" listed in my apps, like some people say to look for).
Someone suggested renaming or removing the accounts.db file, but then someone else responded saying that had messed them up.
Any other solutions or suggestions. Thanks very much for any help.
Click to expand...
Click to collapse
If you intent to sell your NC, then I suggest you reflash, clean install your NC and not logging into any account.
However, if you just want to lend your NC to friends just for a day or two, and will eventually get it back, I would suggest you just change your gmail account password in your PC, next time you're on the NC, it will flag and indicate that cannot sync with your gmail account ('cuz the password has changed)
That's a quick way to go.
votinh said:
If you intent to sell your NC, then I suggest you reflash, clean install your NC and not logging into any account.
However, if you just want to lend your NC to friends just for a day or two, and will eventually get it back, I would suggest you just change your gmail account password in your PC, next time you're on the NC, it will flag and indicate that cannot sync with your gmail account ('cuz the password has changed)
That's a quick way to go.
Click to expand...
Click to collapse
I'm selling it, but wanted to leave on some apps, and also don't want to have to reflash (easy for you, but hard for me). So far I have changed the password, and the new owner can set up their own gmail acct, but my old acct will stay there I guess. I don't like it, but probably it's ok. Do you see any problems with that?
I'm considering getting root explorer and doing something with the accounts.db file after all, but don't want to make things worse.
You're selling it and don't want to reflash and want to keep all apps for your friends, I would say go with the "accounts.db" delete method.
Solved!
Thanks for the advice. When I finally got the market working, I bought Root Explorer (in my frenzy I accidentally first bought Root Tools, maybe come in handy down the road), which was the perfect solution. According to directions I read in posts, I deleted the accounts.db file (first renamed it just in case and when things worked, deleted it), rebooted, and the original gmail account was gone!
Pretty simple after the fact, but hard getting there. Hope this helps someone else.
Believe a "friend" of mine rooted my kindle and has access to all my accounts and information. I have reset everything and yet I find files still in my kindle. Is that because he has hacked all my accounts (gmail?) How can I delete him for good? I don't want to lose all my stuff but I will if necessary. I'm sure he uses this very site himself even.
dnabb4117 said:
Believe a "friend" of mine rooted my kindle and has access to all my accounts and information. I have reset everything and yet I find files still in my kindle. Is that because he has hacked all my accounts (gmail?) How can I delete him for good? I don't want to lose all my stuff but I will if necessary. I'm sure he uses this very site himself even.
Click to expand...
Click to collapse
Don't worry, they shouldn't have access to any of your accounts unless you gave them the password to those accounts. What do you mean when you say there are still files on there? These could just be files created by other apps when you reinstalled them.l, or system apps which save in the "sdcard" area (not an actual SD card, the internal storage.
If I wanted access to all your accounts and I had an identical device the way I would do it would be to make a backup then restore it to my device. This would give me access to everything you do.
But I don't know anyone in willing to waste my device on since now it's useless to me....
Change your passwords check your apps for malware and roll on.
Sent from my XT907 using XDA Free mobile app
How do you know he "hacked" your account? Rooting is basically hacking. Has he told you "hahah I have your accounts and im going to find your bank details etc". As MD678685 said he wont be able to hack any of your accounts if he doesn't have the password. If i were to hack your kindle i would do the same thing as mrkhigh. but that only works if your friend has the same kindle version as you. If you are worried change your account passwords and check for suspicious sent mail, spam etc. Hope this helped!
I know nothing about any of this so bare with me guys/gals please. Just need help once and ill remove my account. If any of you feel like im wasting your time then please tell me and ill remove my post. Thankyou and i hope someone will give me an idea of whats going on.
Friends ex girlfriend is remotely accessing his phone from her computer, she can lock him out and write text out of format on the lock screen. She has deleted everything on his phone 8 times in the past hour. The Verizon recovery app has been disabled, we went into the Verizon store and changed EVERYTHING, number, passwords, made sure if she ever called in wanting info she couldn't get it. There is no way she figured out any of the passwords, she doesn't have access to any of his accounts, gmails facebook etc... i thought for sure she was using the recovery app but that's impossible cause no account has been created to access to his phone. Idk guys like i said im not an expert one thing that has me most skeptical she can write whatever she wants, whatever color, on his phone on any spot on the screen. Its completely out of set text formations on the lock screen looks like doodles i guess. Just curious if you guys have have ever heard of anything like this happening before. Thanks and i apologize if this shouldn't be here just on a desperate attempt to figure this out. Verizon is completely stumped they have no idea how she does it, even the main tech guy at the store (idk his credentials) cant figure it out.
From what I've seen so far, Android Device Manager (part of Google's setup) can do remote wipes. as can Motorola ID. I imagine both of these may "automatically setup" when you re-activate the phone. Beyond that, you'd need an app to perform such changes, I'd think.
Also, if he's on a joint-account with his exGF, and if she has access to the account, VZ may be doing this without the store-people knowing it?
schwinn8 said:
From what I've seen so far, Android Device Manager (part of Google's setup) can do remote wipes. as can Motorola ID. I imagine both of these may "automatically setup" when you re-activate the phone. Beyond that, you'd need an app to perform such changes, I'd think.
Also, if he's on a joint-account with his exGF, and if she has access to the account, VZ may be doing this without the store-people knowing it?
Click to expand...
Click to collapse
If it's Android Device Manager, maybe it would be sufficient to just change the Google login password?
Yeah, he changed his Google password right?
schwinn8 said:
From what I've seen so far, Android Device Manager (part of Google's setup) can do remote wipes. as can Motorola ID. I imagine both of these may "automatically setup" when you re-activate the phone. Beyond that, you'd need an app to perform such changes, I'd think.
Also, if he's on a joint-account with his exGF, and if she has access to the account, VZ may be doing this without the store-people knowing it?
Click to expand...
Click to collapse
He was on a joint account but upon breakin up with her he took her phone, cancelled it, removed her from the account changed his passwords to facebook and google and everything else. Just for the guy to call in and request info he has to answer 5+ extra security questions before hes allowed any info. But ill check out the ADV maybe thats it. Thankyou
8-31-21: My report on the death of this app for the NST is a little premature. See post #5, etc., for a "fix". It worked for the poster and it worked for me. It might work for you.
Don't shoot the messenger...
Sometime in late 2020 or early 2021 it became impossible to negotiate an initial login with the Kindle app (yes, even with the OTP they email you). I've checked the security certificates and they are fine. I've tried installing the app on newer devices, going all the way to Oreo. Same behavior. A logcat on the NST shows a failed SSL negotiation so it looks like the server just won't talk to the old app any longer--at least for an initial authorization. That's the very bad news.
There is a tiny bit of good news for those who already have the Kindle app installed and authorized. At least on my three devices it continues to function completely. You can still check out Overdrive Kindle books and send them to your device and the same book on different devices appears to sync. You can also sideload .mobi books and read those. The clock is, however, probably ticking.
I mention this as a warning for anyone who has a legacy Kindle installation and is thinking of doing major work on their device. If you uninstall or wipe out the Kindle app, it's gone for good. It may be possible to use something like Titanium Backup to restore the app. I was able to find all this out after a reset and then restore my NookManager backup and the app worked fine.
Edit: I have done a little experimenting and the app authorization token appears to include a lot about the device and system. So it's not possible to use Titanium Backup. I tried this on a FW 1.2.1 installation with a working copy of Kindle. Then I updated and rooted FW 1.2.2, installed the Kindle app and then restored a Titanium backup from the same device (but with FW 1.2.1). It failed to initialize, asking to register again. I've had success only in restoring a NookManager backup from the same device with the same FW, etc., and in cloning a device from a NookManager backup. This is not something I would necessarily recommend, but you might have your reasons. However, when I tried to correct the MAC address, this threw off the Kindle app token and it reverted to asking for registration again. So there's very little wiggle room for preserving a working installation if you have to do any significant changing.
I have seen your report in the thread where you were trying to help another forum member to overcome the issues he had with his device. This strengths my beliefs that for resolving the SSL issue work on kernel(s) must be done. Question is where exactly? In Linux kernel or somewhere in Android? What SSL is used on NST if the snag is in Linux - OpenSSL or LibreSSL?
In the defense of the NST I must say that recently saw on YouTube video someone put Alpine Linux on Kindle PW3. What am I trying to say is that older generation of this kind of devices suffer from same illness regardless of brand manufacturer pushing people to just abandon the legacy software on them and create their own custom made one tailored for their devices and their intended way of use.
If the SSL layer is somewhere in Android oh boy that might be harder cookie to bake from my point of view.
SJT75 said:
I have seen your report in the thread where you were trying to help another forum member to overcome the issues he had with his device. This strengths my beliefs that for resolving the SSL issue work on kernel(s) must be done. Question is where exactly? In Linux kernel or somewhere in Android? What SSL is used on NST if the snag is in Linux - OpenSSL or LibreSSL?
In the defense of the NST I must say that recently saw on YouTube video someone put Alpine Linux on Kindle PW3. What am I trying to say is that older generation of this kind of devices suffer from same illness regardless of brand manufacturer pushing people to just abandon the legacy software on them and create their own custom made one tailored for their devices and their intended way of use.
I
Click to expand...
Click to collapse
SJT75 said:
I have seen your report in the thread where you were trying to help another forum member to overcome the issues he had with his device. This strengths my beliefs that for resolving the SSL issue work on kernel(s) must be done. Question is where exactly? In Linux kernel or somewhere in Android? What SSL is used on NST if the snag is in Linux - OpenSSL or LibreSSL?
Click to expand...
Click to collapse
My understanding of the issues is very limited. I once happened into a discussion where it was stated that apps which need to communicate with external servers contain their own SSL certificate which has an expiration date. If so, apps like that just die a "natural" death.
It's actually amazing that there are some apps requiring logins that still work on the NST. Two that come to mind are ancient versions of Pandora and TuneIn Radio. I use both and they still perform flawlessly. For now.
Until today I didn't know what Pandora is but I am familiar with TuneIn radio app. Good to know that some of those apps is still working. Well it just had to be complicated with SSL/TLS hidden somewhere in Android layer. I totally understand why people like Android user friendly UI and apps availability. Still gamble with Java seems that didn't paid of regarding promised platform crossing ability.
So either porting to a new Android version which probably will not be very new (low RAM) or making custom Linux which is anything but user friendly?
Edit: Scratch that question about Linux and the app OP mentioned! I just realize that there is no Linux Kindle app. It could be used through Wine and such witchcraft but that is stupid way of doing things on this device. Better option is to use it on PC and then pass it on to NST using Calibre IMHO. SSL/TLS although remains as weak spot for the time being. Oh well... If that issue with certificates get somehow fixed maybe Kindle cloud reader from browser could reclaim at least part of functions of dedicated Kindle app.
For what its worth I recently got a NST and managed to get the kindle app running this morning. I upgraded to FW 1.2.2, rooted with Nook Manager, and installed the app with adb. The sticking point for me was that I had to go into my Amazon account and disable two-factor authentication. When I tried to log in with the app it still gave the bad password error, and Amazon still sent a text message with an OTP, and that let me log in. This same process DID NOT work if I had two-factor auth turned on in my Amazon account.
I don't understand why they still sent an OTP when two-factor auth is turned off, but they did, and it worked.
wrexroad said:
For what its worth I recently got a NST and managed to get the kindle app running this morning. I upgraded to FW 1.2.2, rooted with Nook Manager, and installed the app with adb. The sticking point for me was that I had to go into my Amazon account and disable two-factor authentication. When I tried to log in with the app it still gave the bad password error, and Amazon still sent a text message with an OTP, and that let me log in. This same process DID NOT work if I had two-factor auth turned on in my Amazon account.
I don't understand why they still sent an OTP when two-factor auth is turned off, but they did, and it worked.
Click to expand...
Click to collapse
Wow! This is very good news. I'll give it a try tomorrow on a fresh system and see if I can get it to work.
Did you by any chance go back and turn on the two-factor login and see if the app still connected after first initializing it?
nmyshkin said:
Wow! This is very good news. I'll give it a try tomorrow on a fresh system and see if I can get it to work.
Did you by any chance go back and turn on the two-factor login and see if the app still connected after first initializing it?
Click to expand...
Click to collapse
Yes, I should have mentioned that. I re-enabled two-factor and downloaded a book to test, everything worked fine. I'm currently using this (https://forum.xda-developers.com/t/app-eink-friendly-amazon-kindle-3-2-0-35.2024062/) version of the app, but I don't think it should matter much.
wrexroad said:
Yes, I should have mentioned that. I re-enabled two-factor and downloaded a book to test, everything worked fine. I'm currently using this (https://forum.xda-developers.com/t/app-eink-friendly-amazon-kindle-3-2-0-35.2024062/) version of the app, but I don't think it should matter much.
Click to expand...
Click to collapse
Excellent. As I expected based on legacy installs continuing to work, once the credentials are on the device, you're good to go whether you use single or two factor login after.
I had a password issue with Amazon awhile back and I'll bet that's where the problem originated. When I changed my password, authentication must have gone to two-factor. I need to check that, but I'm pretty sure that's it. What great news! Back to seamless library book checkout and download, all on the device!
BTW, the version of the app you mention is the only one that works (again!) on the NST.
Something is weird on the Amazon side right now. Even though two factor was turned off, they still sent the OTP. The only difference is that it actually worked when two-factor was disabled, but didn't work when it was enabled. Very strange.
wrexroad said:
Something is weird on the Amazon side right now. Even though two factor was turned off, they still sent the OTP. The only difference is that it actually worked when two-factor was disabled, but didn't work when it was enabled. Very strange.
Click to expand...
Click to collapse
Mmm... I'm glad you posted this before I started testing. I have two NSTs with working Kindle apps right now and I don't want to trash those while tracking down the "solution". I need to think about how I'm going to approach this.
OK, I think my last message was a little unclear.
What I meant was that with two-factor enabled you are supposed to be able to log in with a legacy device, have it give you a password error, receive an OTP via text or email, then use the OTP to actually log in. However, this does not work when two-factor is enabled.
What does work is first disabling two-factor auth, then trying to log in. You will still get a password error, they will still send you an OTP and the OTP will now let you log in and register the device.
This is what I meant when I said something was weird, when two-factor is disabled they shouldn't even be sending you an OTP. It's like disabling two-factor makes it work correctly, rather than turning it off.
To be absolutely clear, once I registered the app, I was able to download a book when two-factor was either on or off. The only thing that was affected was the ability to do the initial sign in.
wrexroad said:
OK, I think my last message was a little unclear.
What I meant was that with two-factor enabled you are supposed to be able to log in with a legacy device, have it give you a password error, receive an OTP via text or email, then use the OTP to actually log in. However, this does not work when two-factor is enabled.
What does work is first disabling two-factor auth, then trying to log in. You will still get a password error, they will still send you an OTP and the OTP will now let you log in and register the device.
This is what I meant when I said something was weird, when two-factor is disabled they shouldn't even be sending you an OTP. It's like disabling two-factor makes it work correctly, rather than turning it off.
To be absolutely clear, once I registered the app, I was able to download a book when two-factor was either on or off. The only thing that was affected was the ability to do the initial sign in.
Click to expand...
Click to collapse
OK, that's what I had hoped for and expected since my two working installs were made before my auth. got changed to two-factor. With really old apps you never quite know how server negotiation is going to evolve.
I hope to give it a try later today.
wrexroad said:
To be absolutely clear, once I registered the app, I was able to download a book when two-factor was either on or off. The only thing that was affected was the ability to do the initial sign in.
Click to expand...
Click to collapse
When I went to my Amazon account it seemed like 2SV was not enabled, by which I mean that clicking on "edit" for the settings generated an email which contained a link that took me to a page with a button that said "Get Started".
I didn't pursue this. I didn't see anything about turning it off--or should I have gone farther along?
That's odd, it does sound like it's not turned on... If you didn't have other devices that you were worried about I would say that you should just turn it on then try to log in. If that doesn't work, turn it off and try again. I think the risk is minimal, but clearly there is something different about your account, so it's up to you.
wrexroad said:
That's odd, it does sound like it's not turned on... If you didn't have other devices that you were worried about I would say that you should just turn it on then try to log in. If that doesn't work, turn it off and try again. I think the risk is minimal, but clearly there is something different about your account, so it's up to you.
Click to expand...
Click to collapse
Yeah, this is not working for me. I looked at the 2SV stuff again this morning and thought, "well, I'll just set it up and then disable it". Except I don't own a mobile phone (no, truly, just an emergency ancient (non-text message) device I keep in my glove compartment), and the QR thingy woud do me no good with the NST. So I'm cooked.
Despite apparently not having 2SV set up, now I can't even generate an OTP email when I try to login with the Kindle app. But my two working installations continue to function. Puzzlement.
Edit: I had a friend with a mobile phone help me out. So I finally got to where I could "disable" 2SV. But it made no difference. Still can't log in or even generate an OTP email by trying to log in. I'm glad this worked for you and I'd like to think it might work for others, but alas my account appears to be "special".
Edit-Edit: Yeehaw! It took a lot of fumbling for me with the unwieldy password I had to recreate in the near past, but by clearing the dalvik cache and making sure that 2SV was actually listed as "disabled" at Amazon, I was finally able to log in a new installation!!! Now I don't have to run a "clone" of another device on this particular NST. Thank you, @wrexroad, for taking the time to look into this and communicate your findings. One big step back from the brink for the Kindle app
That's awesome, I'm glad you got it running! In the future, if you need to get a password via text, you can use a temporary number here: https://sms24.me/en/countries/us/
Hey folks,
I just stumbled into this NST world and want to share my experience with the Kindle app. I'm on FW 1.2.2, and used NookManager to root. I replaced the certs file as recommended in another thread. Once I was ready to login, I enabled 2fa on my Amazon account in a browser. The instructions there clarified that I would need to use PASSWORD+OTP when registering my device. Previously I had tried only the OTP, or only my normal passwrord, but those failed. Appending the OTP to my password, I was able to login.
Hope that helps anyone else who has reached this point.