Database Develop

[Q]are you have screen shields placed by factory originaly?!!!

hi bros
what is this screen shields on both of the phone surfaces??!!!
i bought this phone yesterday!!!but i noticed phone is covered with two clear layer like as screen protectors on both sides!!!on the back side it has a square paper label something like as a mark!!!i dont know what is this ?can i remove this shields?unless phone isnt made with drugonglass???so what is this shields???are you have this sheets on your phone originaly???
tnx

babakmaham said:
hi bros
what is this screen shields on both of the phone surfaces??!!!
i bought this phone yesterday!!!but i noticed phone is covered with two clear layer like as screen protectors on both sides!!!on the back side it has a square paper label something like as a mark!!!i dont know what is this ?can i remove this shields?unless phone isnt made with drugonglass???so what is this shields???are you have this sheets on your phone originaly???
tnx
Click to expand...
Click to collapse
Yeah mine came with both. I think everyone has them.
Some people removed them, but some people say they help with the strength of the glass.
I took my front one off because it got some marks on it... Seems fine without it.
I say: Leave them on until they get damaged (which seems quite easy)

adamryd said:
Yeah mine came with both. I think everyone has them.
Some people removed them, but some people say they help with the strength of the glass.
I took my front one off because it got some marks on it... Seems fine without it.
I say: Leave them on until they get damaged (which seems quite easy)
Click to expand...
Click to collapse
Tnx
This means drugonglass is under the shields?is this true?!!!
Sent from my C6602 using Tapatalk 2

adamryd said:
Yeah mine came with both. I think everyone has them.
Some people removed them, but some people say they help with the strength of the glass.
I took my front one off because it got some marks on it... Seems fine without it.
I say: Leave them on until they get damaged (which seems quite easy)
Click to expand...
Click to collapse
You removed the front one? Did the Sony logo still stick on the phone? or it's embedded on the screen protector??

AW: [Q]are you have screen shields placed by factory originaly?!!!
xiaopai89 said:
You removed the front one? Did the Sony logo still stick on the phone? or it's embedded on the screen protector??
Click to expand...
Click to collapse
Afaik the Sony logo is on the preinstalled shatterproof protectors and will disappear when removing the front one.

it seems,not only this protectors increases dust absorption and finger print but also is getting a feel of lost slip on screen when i want to sweep between the pages.i think is better to remove this shields if it is possible and dont injury knocks the screen

my q is why sony should be placed these protectors even with using drugonglass in z?!!!is this can a reason for worse viewing angle on xperia z?!!!

Retxud said:
Afaik the Sony logo is on the preinstalled shatterproof protectors and will disappear when removing the front one.
Click to expand...
Click to collapse
are you sure this?!!!!

AW: [Q]are you have screen shields placed by factory originaly?!!!
babakmaham said:
are you sure this?!!!!
Click to expand...
Click to collapse
From what has been posted here, yes. Haven't tried it.
Sent from my C6603 using xda app-developers app

Retxud said:
From what has been posted here, yes. Haven't tried it.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
who is tried this? i want to peel off these sheets but scare for SONY logo off.

Retxud said:
From what has been posted here, yes. Haven't tried it.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
I removed mine and the sony logo is still there, im guessing the logo is underneath the glassitself...

mihajaru said:
I removed mine and the sony logo is still there, im guessing the logo is underneath the glassitself...
Click to expand...
Click to collapse
good news for me.thanks.can u explain me what is changed after removing ?

I removed back and front, phone looks and feels awful now, fingerprint magnet, some glue residue on the back and Sony logo was attached to the front protector.

after 2 day i sold f..k xz and came back to note 2....

biffsmash said:
I removed back and front, phone looks and feels awful now, fingerprint magnet, some glue residue on the back and Sony logo was attached to the front protector.
Click to expand...
Click to collapse
C6603:
removed front and back covers. Less fingerprints and better viewing angles for me! :good:
:angel:

exmatproton said:
C6603:
removed front and back covers. Less fingerprints and better viewing angles for me! :good:
:angel:
Click to expand...
Click to collapse
Then you're very lucky as the back of mine looks like a multicolored rainbow of oil slick after a few mins use.
Did you lose the Sony logo off the front? If you didn't you likely just removed the second screen protectors and left the shatter proof factory ones on.
Mines almost unusable now as the fingerprints are worse than any phone I've ever owned.
Viewing angles remain unchanged from removing the protectors, you shouldn't spread false info as there will be a lot of unhappy campers removing their protectors and seeing zero viewing angle difference.

I think you'd better not peel them off. These coverings are designed to prevent broken glass splinters hurting people, and hard and stuck very tight with special method in factory. It won't affect display I suppose, trust Sony. It's part of the device. Moreover, since it scratches easily, add one more film on it...

warranty
not sure if removing sony anti-shatter foils does also remove warranty...as you are given foils also in package, maybe read somewhere on XDA

I do not understand why people remove these...
- When NOT removed and If you drop the phone, it prevents the glass splinters from shattering all over the place.
- When removed Sony can no longer guarantee the phone to be water proof, as stated in another topic.
- When removed the phone attracts more fingerprints.
- When removed you lose the Sony logo on the front.
As far for these scratching a lot, I have not put on any extra screen protector and do not have a single scratch yet.
However I do use a leather case, always do that with all my phones.
Used Xperia Play for 2 years aprox, not a single scratch on the pre installed film.
Kind regards, Stefan.

The dragontrail glass is only for durability purposes! DO NOT remove the shatter proof sheet, it protects the screen from drop shocks so it doesn't get broken! Use the supplied screen protector and you will be fine! Unfortunately here in Greece it ships without screen protectors in the box and damn we got the highest price! (€699)

Does removing the factory installed screen protector on front affect water-proofing?

I want to remove it but afraid that it will somehow affect the water proofing feature. Can anyone confirm if it will remain waterproofed it i do so?

Fasty12 said:
I want to remove it but afraid that it will somehow affect the water proofing feature. Can anyone confirm if it will remain waterproofed it i do so?
Click to expand...
Click to collapse
Ask yourself this: When I paint the windows in my house, will they become more waterproof?

Dsteppa said:
Ask yourself this: When I paint the windows in my house, will they become more waterproof?
Click to expand...
Click to collapse
That's not the right comparison. Right one is: "When I install tin film of plastic cover over the nuclear submarine, will it become more waterproof?"

Fasty12 said:
I want to remove it but afraid that it will somehow affect the water proofing feature. Can anyone confirm if it will remain waterproofed it i do so?
Click to expand...
Click to collapse
If you take of the screen protector the Xperia will sink.... :laugh:

tamir_89 said:
That's not the right comparison. Right one is: "When I install tin film of plastic cover over the nuclear submarine, will it become more waterproof?"
Click to expand...
Click to collapse
Hahaha it's hard to find something good.
Got another one: When you remove the protector, do you think that the glass will suddenly start leaking? I mean it's glass... the molecules of the glass are closer together then water.
Or if you want a simple answer: NO IT WILL NOT AFFECT THE DEVICE WATERPROOF ABILITY AT ALL!

Dsteppa said:
Hahaha it's hard to find something good.
Got another one: When you remove the protector, do you think that the glass will suddenly start leaking? I mean it's glass... the molecules of the glass are closer together then water.
Or if you want a simple answer: NO IT WILL NOT AFFECT THE DEVICE WATERPROOF ABILITY AT ALL!
Click to expand...
Click to collapse
Actually this is not a very apt comparison at all.
When removing the protector you *MAY* break the water tight seal the glass has with the midframe, the anti-shatter sheet is glued down with a pretty strong adhesive, force on the wrong angle will break the seal.
Short answer: It can if removed incorrectly.

May I also just ask how the screens use in wet weather will be effected. With the film on I seem able to use the screen accurately even with many droplets on screen.
Sent from my C6603 using Tapatalk 2

Kallb123 said:
May I also just ask how the screens use in wet weather will be effected. With the film on I seem able to use the screen accurately even with many droplets on screen.
Sent from my C6603 using Tapatalk 2
Click to expand...
Click to collapse
That's not a problem at all.
The only problem is that the movie will most likely stop playing since drops will be registered as touches and then the screen will do crazy things when you have a lot of drops on the screen.
I use MX Player, it has an option to lock all the controls and even that gets bypassed sometimes by the drops.

Dsteppa said:
That's not a problem at all.
The only problem is that the movie will most likely stop playing since drops will be registered as touches and then the screen will do crazy things when you have a lot of drops on the screen.
I use MX Player, it has an option to lock all the controls and even that gets bypassed sometimes by the drops.
Click to expand...
Click to collapse
But with the film on, the drops don't seem to count as touches. I'm not too bothered tbh, it's rare I want to use it with water on screen. When I get my replacement I'll probably remove it's protector
Sent from my C6603 using Tapatalk 2

Fasty12 said:
I want to remove it but afraid that it will somehow affect the water proofing feature. Can anyone confirm if it will remain waterproofed it i do so?
Click to expand...
Click to collapse
Is this a serious question?
WHY would you desire to remove the shatter proof coating in the first place. I may imagine doing so may affect your warranty? I doubt Sony would have added that addition if it was not needed?
Glass is impervious to water ingress.
Kind regards.

Ryland Johnson said:
Is this a serious question?
WHY would you desire to remove the shatter proof coating in the first place. I may imagine doing so may affect your warranty? I doubt Sony would have added that addition if it was not needed?
Glass is impervious to water ingress.
Kind regards.
Click to expand...
Click to collapse
it's there to evade some dumbasses complaining about cutting fingers and ****, if somehow you break the screen. it won't make your screen stronger, only safer afterwards... so it's use comes in, only when you already broke the glass, and decide to play with it's screen

tamir_89 said:
it's there to evade some dumbasses complaining about cutting fingers and ****, if somehow you break the screen. it won't make your screen stronger, only safer afterwards... so it's use comes in, only when you already broke the glass, and decide to play with it's screen
Click to expand...
Click to collapse
Indeed so, indeed so.

Ryland Johnson said:
Is this a serious question?
WHY would you desire to remove the shatter proof coating in the first place. I may imagine doing so may affect your warranty? I doubt Sony would have added that addition if it was not needed?
Glass is impervious to water ingress.
Kind regards.
Click to expand...
Click to collapse
Because the shatter proof sheet scratches very fast.
Sent from my C6603 using xda app-developers app

Dsteppa said:
Because the shatter proof sheet scratches very fast.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
That is why well over 100 companies manufacture screen protectors ranging in price from a euro to 30 euros. A screen protector is a wise investment. :good:
Regards.

Dsteppa said:
Because the shatter proof sheet scratches very fast.
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
And that's the reason i removed it...lol

Biggest mistake ever removing the factory installed protectors. Glad Sony replaced mine because the back and front glass look like crap once the factory sheets are removed and you lose the Sony logo. Put a screen protector over it, you won't be sorry.

biffsmash said:
Biggest mistake ever removing the factory installed protectors. Glad Sony replaced mine because the back and front glass look like crap once the factory sheets are removed and you lose the Sony logo. Put a screen protector over it, you won't be sorry.
Click to expand...
Click to collapse
i was glad to remove the protector. BECAUSE the Sony logo is gone and the clarity of the display is better. Also, the fingerprints are easier to remove! It is stated in the manual that removing the protector is "ok".

Remove. Please RTFM. Page 13 (EN):
"A protective plastic sheet is already attached to the screen of your device when you
buy it. You should peel off this sheet before using the touchscreen. Otherwise, the
touchscreen might not function properly."

ludow said:
Remove. Please RTFM. Page 13 (EN):
"A protective plastic sheet is already attached to the screen of your device when you
buy it. You should peel off this sheet before using the touchscreen. Otherwise, the
touchscreen might not function properly."
Click to expand...
Click to collapse
Dont think they were reffering to the anti shatter film

nazrin313 said:
Dont think they were reffering to the anti shatter film
Click to expand...
Click to collapse
Roger that. My bad. Anyway, major screen protection firms are selling films for Z.

Question about removing Xperia Z's anti-shatter film

Hi guys, just curious about this, I would like to remove the front screen protector of Xperia Z to get rid of the Sony logo (not hate it put prefer the front to be all black). Would this affect the phone's water resistant feature?
Have anyone tried this yet?
Besides, is the oleophobic coating of the glass affected? From the video below I think there's something wrong with his phone, the reflection looks pixelated

silversun92 said:
Hi guys, just curious about this, I would like to remove the front screen protector of Xperia Z to get rid of the Sony logo (not hate it put prefer the front to be all black). Would this affect the phone's water resistant feature?
Have anyone tried this yet?
Besides, is the oleophobic coating of the glass affected? From the video below I think there's something wrong with his phone, the reflection looks pixelated
Click to expand...
Click to collapse
I have done it and it doesnt affect water resistant feature (its a film how can it affect the whole phone?)
the screen have little to no oleophobic feature, your best bet is to buy some rain-x spray it on there or buy another screen protector that have oleophobic property.

I'd leave it alone for the simple reason you'll regret it. I don't see how you could remove it, you can cover it over in some way but it's not going to look good and would be noticeable from certain angles.

XperienceD said:
I'd leave it alone for the simple reason you'll regret it. I don't see how you could remove it, you can cover it over in some way but it's not going to look good and would be noticeable from certain angles.
Click to expand...
Click to collapse
What do you mean with: "I don't see how you could remove it" ?
It's just a matter of removing the sheet.

Dsteppa said:
What do you mean with: "I don't see how you could remove it" ?
It's just a matter of removing the sheet.
Click to expand...
Click to collapse
..
silversun92 said:
I would like to remove the front screen protector of Xperia Z to get rid of the Sony logo
Click to expand...
Click to collapse

XperienceD said:
..
Click to expand...
Click to collapse
The Sony logo is on the film, it peels off with it

Michealtbh said:
The Sony logo is on the film, it peels off with it
Click to expand...
Click to collapse
So it is. Still, I'd leave it, many People in the Arc section have lived to regret taking off the factory applied protector for various reasons, but, your Phone, your decision.

XperienceD said:
So it is. Still, I'd leave it, many People in the Arc section have lived to regret taking off the factory applied protector for various reasons, but, your Phone, your decision.
Click to expand...
Click to collapse
Lol, i have no regrets soo far, well hey, if the screen breaks.. It breaks

nazrin313 said:
Lol, i have no regrets soo far, well hey, if the screen breaks.. It breaks
Click to expand...
Click to collapse
It's scratches I'd be more concerned about, which is why I always stick one on top of the factory one because if or when I come to sell it, a pristine screen will get more than one that's scuffed to bits.

XperienceD said:
It's scratches I'd be more concerned about, which is why I always stick one on top of the factory one because if or when I come to sell it, a pristine screen will get more than one that's scuffed to bits.
Click to expand...
Click to collapse
Thats the reason i removed it, it had tons of scratches...now im using the clarivue sp with the added bonus of the face w/o the Sony logo... Looks pretty slick if u ask me

nazrin313 said:
Thats the reason i removed it, it had tons of scratches...now im using the clarivue sp with the added bonus of the face w/o the Sony logo... Looks pretty slick if u ask me
Click to expand...
Click to collapse
Get some pics up.

XperienceD said:
Get some pics up.
Click to expand...
Click to collapse
Sorry about the bad quality as Im just using my lappy's camera lol as I dont have another camera handy.
There are another nice high quality pics around in this forum with the sheet removed....the phone with just a blank shiny and black face is just too sexy

Took the film back too?

BR4DOKYBrazil said:
Took the film back too?
Click to expand...
Click to collapse
Yeap, both were all scratched up..dats the reason i removed it at the first place

XperienceD said:
It's scratches I'd be more concerned about, which is why I always stick one on top of the factory one because if or when I come to sell it, a pristine screen will get more than one that's scuffed to bits.
Click to expand...
Click to collapse
it wont scratch, it'll break but wont scratch, I had my S3 in my pocket with keys and coins (not intentionally but when in a rush) it never scratch, Dragontrail suppose to be stronger than Gorilla Glass 2 so it be ok.

G1_enthusiast said:
it wont scratch, it'll break but wont scratch, I had my S3 in my pocket with keys and coins (not intentionally but when in a rush) it never scratch, Dragontrail suppose to be stronger than Gorilla Glass 2 so it be ok.
Click to expand...
Click to collapse
IT WILL SCRATCH.
IT WILL BREAK AND IT WILL SCRATCH.
My previous xperia z had antishatter removed and the screen scratched from a sand particle hidden in my microfibre cloth, if you decide or have taken of antishatter film, put on a screen protector as soon as you can. Preferably you should put on a good quality screen protector onto antishatter film. That way you will have constant new looking phone.
Which is what I've done with my NEW Xperia z.
after taking off antishatter layer on my first phone, AIthough i was trying to convince myself that it feels better, and looks better debranded,
Everytime the beautiful nostalgic sony ad came on, and the guy took out his xperia z to take a picture of his girlfriend covered in courfull dry paint. And then washed his xperia z afterwards showing off that beautiful sony logo. My heart would sink ,as I knew my phone would never look like that ever again.
Sent from my C6603 using xda app-developers app

nazrin313 said:
Yeap, both were all scratched up..dats the reason i removed it at the first place
Click to expand...
Click to collapse
The logo "Xperia" and other information on the back does not go out after removing the film?

BR4DOKYBrazil said:
The logo "Xperia" and other information on the back does not go out after removing the film?
Click to expand...
Click to collapse
No
Sent from my C6603 using xda premium

I took mine off and im kinda regretting it. Its a fingerprint magnet now and the screen isnt as smooth as i thought it'd be! it kinda feel sticky and way too many dust gets on it easily and i found a tiny scratch on my screen now gonna have to go get a new screen protector tomorrow

Phat-T said:
I took mine off and im kinda regretting it. Its a fingerprint magnet now and the screen isnt as smooth as i thought it'd be! it kinda feel sticky and way too many dust gets on it easily and i found a tiny scratch on my screen now gonna have to go get a new screen protector tomorrow
Click to expand...
Click to collapse
Yeap, i put an oleo sp straight on after i removed it

xperia z - screen super sensitive?

I am sure everyone here is aware of the behavior of a screen when you put pressure on it or squeeze the sides of a phone hard? You see moving liquid etc.
I don't apply too much pressure to my phone when scrolling through a page and there is a specific section on my screen that makes this liquid ripple effect as if I am putting pressure on the screen?
Even when I took a screen capture , which requires power button + volume down it created this effect on the edges of my screen and I am not even holding the phone tight.
Should I be concerned ? I do have a tpu gel that I am thinking is intensifying the pressure when I hold the phone.

radlink14 said:
I am sure everyone here is aware of the behavior of a screen when you put pressure on it or squeeze the sides of a phone hard? You see moving liquid etc.
I don't apply too much pressure to my phone when scrolling through a page and there is a specific section on my screen that makes this liquid ripple effect as if I am putting pressure on the screen?
Even when I took a screen capture , which requires power button + volume down it created this effect on the edges of my screen and I am not even holding the phone tight.
Should I be concerned ? I do have a tpu gel that I am thinking is intensifying the pressure when I hold the phone.
Click to expand...
Click to collapse
Mine has the ripples too on the bottom left corner if I only press on it but other than that its fine. Its an LCD thing. I don't use a case on mine I like my phone naked! lol

What about skins? I wanted to go naked on this phone too, it is so beautiful. So you don't even use a screen protector?

radlink14 said:
What about skins? I wanted to go naked on this phone too, it is so beautiful. So you don't even use a screen protector?
Click to expand...
Click to collapse
I was thinking about putting on some carbon fiber skins but then decide not to just because I dont really care for it. Yea I have a screen protector on but before that, I took off my anti shatter film. The screen was so sticky and not smooth and I saw a tiny scratch on it so I put on a screen protector back on right away. Don't ever take that anti shatter film off lol
Sent from my C6603 using xda app-developers app

Phat-T said:
I was thinking about putting on some carbon fiber skins but then decide not to just because I dont really care for it. Yea I have a screen protector on but before that, I took off my anti shatter film. The screen was so sticky and not smooth and I saw a tiny scratch on it so I put on a screen protector back on right away. Don't ever take that anti shatter film off lol
Sent from my C6603 using xda app-developers app
Click to expand...
Click to collapse
There's a film provided by Sony already on the phone ?

radlink14 said:
There's a film provided by Sony already on the phone ?
Click to expand...
Click to collapse
Yea called the anti shatter film. If you look closely at the speaker and mic grill on the front of the phome you'll see it. There's also one on the back. The Sony logo comes off with it too if you take the film off
Sent from my C6603 using xda app-developers app

Interesting so I really don't need to add extra protection then ! I may be exchanging my phone anyway due to the weird liquid behavior on the same spot.

I went back to the t-mobile store and the employee saw the screen issue and agreed that was not normal. We also checked the demo display and it had the exact same issue except in a different location on the screen.
Told them I wanted to exchange but I would continue returning the phone if each new phone has the same behavior. They would not allow me to exchange for the HTC one without paying 50 dollars restock fee. I thought that was pretty ridiculous considering that there was an existing issue and concern.
The exchange ended up not having the issue ^_^ yay. I really did want to keep the xperia but I actually thought it was going to be a normal thing on the phone which I would not of been OK with. Now I am wondering if it was a case I tried at the Sony store that was super tight that might be caused the lcd to have a weird spot.

Matte Screen Protector for ZR

Hi all !
I just bought THIS screen protector and just loving it.
I was worried about the fitting to the screen but the precision laser cut was very accurate, fits exactly to the screen.
I applied it myself for the first time, it is magnetic(does not leave adhesive residue) so you can always remove apply it correctly. The matte finish is just excellent
It is for Indian users but the seller said they import these from abroad so the same brand can be found on international sites too.

I got a clear screen protector and i like it better than matte finish.

george101 said:
I got a clear screen protector and i like it better than matte finish.
Click to expand...
Click to collapse
1) can anybody show a side-to-side comparison of matte and clear protectors applied?
2) are the aftermarket protectors better than the sony stock protector?

Hi guys, just got my ZR and I'm loving it but it's quite the fingerprint magnet. Is there a screen protector that can help. I have set my eyes on this one http://www.ebay.co.uk/itm/Vikuiti-A...ting_LaptopAccessories_RL&hash=item51b125bc05 but I don't know if it's any good. Any suggestions?

andes83 said:
Hi guys, just got my ZR and I'm loving it but it's quite the fingerprint magnet. Is there a screen protector that can help. I have set my eyes on this one but I don't know if it's any good. Any suggestions?
Click to expand...
Click to collapse
I buy a 3pack of matte protection @ 3.5€ and it's just what i need!
But i cant remember the seller... Go for the cheaper (3pack is good if ou miss something during the assembly)

bismouth said:
I buy a 3pack of matte protection @ 3.5€ and it's just what i need!
But i cant remember the seller... Go for the cheaper (3pack is good if ou miss something during the assembly)
Click to expand...
Click to collapse
Thank you, for your suggestion I got 3 matte and 6 clear screen protectors I will see how it goes and which I like best. Has anyone removed the pre-installed protector from their device. I'm concerned that I'll remove the SONY logo if I get rid of it (I hear that happened on xperia Z units). Is there any danger in removing it and should I remove it at all or just place the new one on top of it?

Place the new one on top. Doesn't dampen sensitivity too much.
Sent from my C5502 using Tapatalk 4

matte
At first didn't like my matte screen protector...
Pros
feels nicer!
no filthy finger prints!
minimal light reflections..
if you use dim backlight it really helps..
you can re apply it.
no air bubbles at all!
Cons
unable to use it as a mirror when screen off.
colours and images on the screen are not as sharp,
slight glow on whites.
But now i wouldn't go back!

I'm still waiting for my screen protector and today I noticed a tiny scratch on the screen. It's not that visible but is there a way to fix that. Will the screen protector cover it or I'm stuck with a scratched SONY?

andes83 said:
I'm still waiting for my screen protector and today I noticed a tiny scratch on the screen. It's not that visible but is there a way to fix that. Will the screen protector cover it or I'm stuck with a scratched SONY?
Click to expand...
Click to collapse
Take a pencil eraser and rub it off..

It should not be the screen itself. Sony is known to apply screen protectors on each phone in-manufacture. It's not visible but if you insist you can remove it. It's even possible that the sony logo is simply printed on it, like the Xperia V.
Sent from my C5503 using xda app-developers app

Removing the anti-shatter film will invalidate the warranty.

Seriously?? How could this void the warranty? It has nothing to do with the hardware and doesn't affect the device in any way!
Made in ZR

Ilko said:
Seriously?? How could this void the warranty? It has nothing to do with the hardware and doesn't affect the device in any way!
Made in ZR
Click to expand...
Click to collapse
Yes, there are a lot users talking about it, removing the shatter-proof screen protector voids the warranty because it'll no longer be shatter proof.....stupid isn't it? I already scratched mine before knowing that, now I'm stuck with a scratched screen until my warranty ends and I remove the f****ing thing.

is this detail specified in the texts ?

Ilko said:
is this detail specified in the texts ?
Click to expand...
Click to collapse
I can't really say I haven't researched this, what I know for sure is that this protector is factory heated onto the screen and it's not supposed to be removed.

Hi,
I'm trying to find a screen protector for a whole display, without any holes in it.. I found this: amazon.de/dp/B00K1JTIMG/ but of course, I'm not sure if it's a picture of a real product or just illustrative picture. can someone confirm / recommend something else?
(sorry, posting links is blocked, since I'm new here..)

andes83 said:
I can't really say I haven't researched this, what I know for sure is that this protector is factory heated onto the screen and it's not supposed to be removed.
Click to expand...
Click to collapse
You are right. The protector is factory-heated onto the screen, remove it and the Sony logo will go off. As for the warranty, there are two paragraphs Sony could use against you if you remove the protector (as stated by the Important information brochure):
Do not paint or attempt to disassemble or modify the product. Only Sony authorized personnel should perform service.
Click to expand...
Click to collapse
Additionally, "What we will do" section, says:
7. Tampering with any of the seals on the Product will void the warranty.
Click to expand...
Click to collapse
I know it is not very specific, but hey, that's how lawyers do it.
The only thing I always wonder about, is what kind of glass ZR's screen uses... GorillaGlass? DragonTrail? I found many different sites talking about that, but none of them had conclusive evidence. Sony's official response is ZR uses a "Shatter proof and scratch-resistant glass". No specific brand mentioned .
Anyway, I bought a good protector for 5 bucks. It's a "KLX Anti-explosion Soft TPU 0.2mm Screen Guard Film" and the package includes everything you need to apply it successfully. Also, I saw a 1mm tempered glass protector for 15 bucks, thinking of buying it next time.