Hi, I have many S5830 phonesbut now on one from that I have problem, whan I put cable in pc is not on phone icon USB and pc tell me problem with conect... Other phones not have problem with conect so can You help me? Can I flash stock firmware by stock CWM (how) and delete this error from phone? I have wiped factory reset but always same problem.
MY PHONE WRITE IN THE LEFT DOWN ON DISPLAY : SAVE MODE....??? What is it?
Thanks so much
Can I flash Stock Firmware via Stock CWM : download md5 file with Stock Rom for and flash by Apply Update From SDcard???
Thanks
Paul Koty said:
Can I flash Stock Firmware via Stock CWM : download md5 file with Stock Rom for and flash by Apply Update From SDcard???
Thanks
Click to expand...
Click to collapse
NEVER!! you can try flashing a custom rom, maybe It's your own rom bug
Which rom are you using?
Enable USB debug in settings and reinstall samsung drivers in your pc or try changing the USB port then boot in download mode to flash a fresh stock via Odin
ummm you can try mobile odin, several members posted that works fine
Viper The Ripper said:
Never
Click to expand...
Click to collapse
Thanks, so now I am in ...
Becazuse I have rooted, flashed custom cwm and Custom Rom. Not change... Always I can´t connect with pc. ..
You have any idea what happend?
Always if I put cable to phone, normal can charging battery, but not connecting
Paul Koty said:
Thanks, so now I am in ...
Becazuse I have rooted, flashed custom cwm and Custom Rom. Not change... Always I can´t connect with pc. ..
You have any idea what happend?
Always if I put cable to phone, normal can charging battery, but not connecting
Click to expand...
Click to collapse
Try enabling USB debug in settings, reinstall drivers in your pc check they work and that the pins of your cable are working properly, Is posible to try with a friend's cable?
Here it is modded mobile odin just in case you can't conect your phone to your pc
http://forum.xda-developers.com/showthread.php?t=2029180
Viper The Ripper said:
Try enabling USB debug in settings, reinstall drivers in your pc check they work and that the pins of your cable are working properly, Is posible to try with a friend's cable?
Click to expand...
Click to collapse
Usb debug Enable. Drivers for other phones s5830 (I have 3pcs) are good, cable used 3 other pcs...
EDIT:
DONE! Was USB conector little bit curved.. Knife is my friend now
Paul Koty said:
Usb debug Enable. Drivers for other phones s5830 (I have 3pcs) are good, cable used 3 other pcs...
Click to expand...
Click to collapse
You don't need the other phone's drivers YOU NEED THE SPECIFIC GALAXY ACE DRIVERS!!
Viper The Ripper said:
You don't need the other phone's drivers YOU NEED THE SPECIFIC GALAXY ACE DRIVERS!!
Click to expand...
Click to collapse
Oh man, I don´t know all but I am not idiot too much. I have many GALAXY ACE´s S5830 phones man.
Paul Koty said:
Oh man, I don´t know all but I am not idiot too much. I have many GALAXY ACE´s S5830 phones man.
Click to expand...
Click to collapse
I didn't say that but you could write better to avoid confusions that's all, I try to help you but I need to understand exactly what you mean so...
Well I'm glad you found the solution
Viper The Ripper said:
I didn't say that but you could write better to avoid confusions that's all, I try to help you but I need to understand exactly what you mean so...
Well I'm glad you found the solution
Click to expand...
Click to collapse
No problem man :good: You are one from who want to always help me. Thanks :good:
Related
I apologize if thread is already posted.
I tried to flash my i9001 to stock firmware but ODIN won't recognize my device. Actually my widows XP machine won't recognize it either.
Tried with different machine and reinstalled drivers and still nothing.
I have installed CWM recovery mode and phone is rooted.
Any suggestions how to flash it to stock firmware ?
Thanks in advance
getmeister said:
I apologize if thread is already posted.
I tried to flash my i9001 to stock firmware but ODIN won't recognize my device. Actually my widows XP machine won't recognize it either.
Tried with different machine and reinstalled drivers and still nothing.
I have installed CWM recovery mode and phone is rooted.
Any suggestions how to flash it to stock firmware ?
Thanks in advance
Click to expand...
Click to collapse
Check step by step to resolve your problem http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
xsenman said:
Check step by step to resolve your problem http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
Click to expand...
Click to collapse
Sorry, but I forgot to mention that ac power adapter won't charge the phone also ... only when SGS+ is turned off ?!
getmeister said:
Sorry, but I forgot to mention that ac power adapter won't charge the phone also ... only when SGS+ is turned off ?!
Click to expand...
Click to collapse
can you explain what you mean by "only when SGS+ is turned off ?!"
can you charge by USB Cable?
xsenman said:
can you explain what you mean by "only when SGS+ is turned off ?!"
can you charge by USB Cable?
Click to expand...
Click to collapse
sometimes it does someties it doesn't ... odd isn't it
but still not recognized with winXP.
getmeister said:
sometimes it does someties it doesn't ... odd isn't it
but still not recognized with winXP.
Click to expand...
Click to collapse
Clean your contacts with alcohol and brush and try to use a on a different USB slot at back of PC
Did you try the solutions on the link, I posted?
xsenman said:
Clean your contacts with alcohol and brush and try to use a on a different USB slot at back of PC
Did you try the solutions on the link, I posted?
Click to expand...
Click to collapse
Tried on two win XP machines, and win 7 notebook. I really don't think there is a problem with machines
getmeister said:
Tried on two win XP machines, and win 7 notebook. I really don't think there is a problem with machines
Click to expand...
Click to collapse
Its not only about the machines, its also about the USB cable and USB slot, you need to isolate the problem by way of elimination....get a hold of another original samsung USB Cable to isolate that is not the cause and than examine your Phone USB slot for damage/mislaigned pins ...you can try moving the usb plug to see, if connection is being established
xsenman said:
Its not only about the machines, its also about the USB cable and USB slot, you need to isolate the problem by way of elimination....get a hold of another original samsung USB Cable to isolate that is not the cause and than examine your Phone USB slot for damage/mislaigned pins ...you can try moving the usb plug to see, if connection is being established
Click to expand...
Click to collapse
considering the cables ... got one from Samsung and other from Nokia, also ac power adapter is yet another so we eliminated the possibility of broken cables .
Still day after I sucessfully installed CWM recovery mode with ODIN.
So I suspect a problem with firmware
getmeister said:
considering the cables ... got one from Samsung and other from Nokia, also ac power adapter is yet another so we eliminated the possibility of broken cables .
Still day after I sucessfully installed CWM recovery mode with ODIN.
So I suspect a problem with firmware
Click to expand...
Click to collapse
Nokia Cables are not compatible with Samsung Phones and for ICS, its best to use Samsung Nexus drivers or ICS drivers
xsenman said:
Nokia Cables are not compatible with Samsung Phones and for ICS, its best to use Samsung Nexus drivers or ICS drivers
Click to expand...
Click to collapse
I got myself a new cable, installed Nexus drivers .... and gues what ....
SGS+ is charging but message is still there "USB device not recognized" ....
Do you have something else in mind ?
getmeister said:
I got myself a new cable, installed Nexus drivers .... and gues what ....
SGS+ is charging but message is still there "USB device not recognized" ....
Do you have something else in mind ?
Click to expand...
Click to collapse
Assuming you did not just buy any compatible cable, much to my regret, I myself have bought and found unusable .
and you have tried the Quick Guide
If phone is not being detected of a sudden (Quick Guide)
1. Reboot PC after a power cord pull and Reboot Phone after a Battery Pull , try USB connection
2. Try using a different Samsung USB cable (must be sumsung and nothing else)
3. Try a different USB port (use USB slots at the back of PC)
4. Try on a lap top or different PC
5. Try install nexus drivers - needed for ICS firmwares
6. Make sure you don't have fast charge on.
Trick : Putting your Phone into download mode and connecting it with USB cable to PC will do it automatically. Meaning drivers will be installed by windows If there are none.
Frankly, these works for me all the time, so I am a bit clueless as to why you are unable to. I mean losing USB connection is pretty common, happens every now and than.
You should also try switching off WIFI , reboot the phone, reboot the PC, start Odin and than plug in the phone ( this worked for some)
Since the USB is trying to connect but not recognized as to what it is, you should try again, this time using device manger as mentioned here http://forum.xda-developers.com/showpost.php?p=27205737&postcount=4571
thats all I can think of
Finaly solved my problem!
Thanks!
Nothing helped, thank you for your effort.
Is there any way to flash to stock firmware other than ODIN ?
getmeister said:
Nothing helped, thank you for your effort.
Is there any way to flash to stock firmware other than ODIN ?
Click to expand...
Click to collapse
use MObile ODIN
xsenman said:
use MObile ODIN
Click to expand...
Click to collapse
Tried that too... "Device unsupported ....
change the cable if that dosnt helps try on windows 7 machine cuz once i flashed jw4 on ma windoes xp n d usb connection timed out n i ended with soft brick but got lucky that i could re enter download mode n i flashed jw4 again but in windown 7 machine happy flashing
YOMAN18 said:
change the cable if that dosnt helps try on windows 7 machine cuz once i flashed jw4 on ma windoes xp n d usb connection timed out n i ended with soft brick but got lucky that i could re enter download mode n i flashed jw4 again but in windown 7 machine happy flashing
Click to expand...
Click to collapse
tried with 2 WinXP machines , one Win7 and even Ubuntu 12.04 LTS
no luck
getmeister, you can not solve this problem? I also ran into her niznayu what to do, I know that never in my life do not put anything on this board if you solved the problem of how to write please [email protected]
If nothing works, then its most probably your mobile usb port.
Get it Samsung repair!
Sent from my GT-I9001 using xda app-developers app
Hello there,
I am Belgian so i'm gonna try to do my best to find my english somewhere
I have a samsung galaxy s3 mini gt-i8190..
I have tried to flash with odin thru pda BUT it stopped with fail as result..
Then i have tried to put original firmware back the same way but fail again,
then tried again with same original firmware and succeeded..
Phone froze at samsung logo, tried again and now i got the message "firmware upgrade encountered an issue. please select recovery mode in Kies & try again."
Ok, so i plug the phone back in the usb cable: Device Not Recognized! (windows 7 ultimate laptop).
I can get in to download mode: still not recognized via usb.
recovery mode DOESN'T work at all (3 button combo) just the error message at the normal boot and the download mode.
So basically i can't flash cause i can't connect, reinstalled drivers, used another pc, same thing...
It doesn't even charge the phone..
Odin mode says:
Product name: GT-I8190
Custom Binary Download: YES (4 counts)
Current binary: Custom
System status: Official
So does there somehow any file exists to put on my sd card to access usb OR a file to go into recovery mode.
Any tip is welcome, will try them all..
Thanks by advance,
yoni089
Have you tried installing Samsung's USB Driver? I know installing kies comes with the USB drivers but just in case. You might want to check if it's properly installed in your computer. Try reseting your counter first with Triangle Away. Please tell me more of what you did.
Click on the thanks button if I helped!
Change usb port and make sure all processes with kies are killed in taskmanager.
Open Odin. Put the phone in download mode and connect usb.
Hello,
Thanks for the reply's
I did install Odin first, when i flashed my phone it failed..
So i decided to install kies to make sure i had the right drivers,
Uninstalled Kies without the drivers. The phone was still recognized back then!!
Flashed it again and again FAIL!
Since then NOTHING works with the usb connection, windows does not recognize my phone "unknown device".
So it doesnt even know what it is..
Uninstalled the drivers and reinstalled them, rebooted my laptop with battery out for a minute but nothing works..
Also i tried to connect to another pc but no luck..
So i guess the key on my phone for the driver to find is missing/deleted by flashing and failing..
That's why i asked if there is any file to putt on my sd card to be recognized by my computer.
I did tried many times using another usb port..
Also tried with and without sim card/ sd card.
(btw: does they have to be in there anyway?)
Thnx and grtz,
Yoni089
please post where odin fail?
samersh72 said:
please post where odin fail?
Click to expand...
Click to collapse
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
yoni089 said:
Sorry, can't say.
It was somewhere in the last 20% if i'm right, its been a week from now and did not take a log of it with reflashing in mind..
Click to expand...
Click to collapse
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
SethCode'z said:
before flashing, make sure you can see a COM: something when you connect your device.
Sent from 12*.5x.**.58
Click to expand...
Click to collapse
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
yoni089 said:
I know that, my connection worked fine i did see the com: port in odin and it said "added!".
then i started flashing again and suddenly "fail", got the triangle, went back to download mode, tried to connect again and windows OR Odin didn't recognized my phone anymore, device not recognized and no "com:" in odin.
Tried different ports, battery out for a minute, no sim, no sd, reinstalled drivers, nothing works..
That's the point why i made this thread cause i see no solution in this anymore, if i have no usb connection i can't flash ( OR IS THERE A WAY???), if i can't flash i probably can't get usb connection..
thx for the effort
grtz,
Yoni089
Click to expand...
Click to collapse
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
SethCode'z said:
With what you're saying, it seems something has gone corrupt. Maybe a binary or an image. Flashing a rom using your phone might fix this but it's not a 100% success. It might destroy your phone more or fix it. It's a 50/50... :fingers-crossed:
Click to expand...
Click to collapse
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
yoni089 said:
And how exactly does this work?
I guess with the sd card but i don't have recovery mode so..
Click to expand...
Click to collapse
Did your three button combination work for recovery mode before this happened?
tys0n said:
Did your three button combination work for recovery mode before this happened?
Click to expand...
Click to collapse
I have no idea, i never needed it before..
yoni089 said:
I have no idea, i never needed it before..
Click to expand...
Click to collapse
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
tys0n said:
Ok. Many i8190 was delivered without working combo so I thought I should ask.
What happens when you try to enter recovery? (vol+/home/power)
Nothing at all, completely dead?
Click to expand...
Click to collapse
It just turns on to the triangle that says there is an issue with the firmware upgrade..
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
Do provide the odin log, probably corrupted PIT ?
yoni089 said:
It just turns on to the triangle that says there is an issue with the firmware upgrade..
Click to expand...
Click to collapse
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
linux is your answer it never fails
Sent from my Vodafone Smart II using xda premium
AssToast said:
Do provide the odin log, probably corrupted PIT ?
Click to expand...
Click to collapse
How do i get that log?
tys0n said:
aah ok, and Odin doesn't recognize it at all when you connect it in download mode?
Click to expand...
Click to collapse
no it doesn't, not even my laptop does..
yoni089 said:
How do i get that log?
no it doesn't, not even my laptop does..
Click to expand...
Click to collapse
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
nuotal you
tys0n said:
No kies, correct drivers, tried different ports. Then I don't know. Are you using original USB cable?
I once got a bad flash like you did, but at least Odin detected it and I was able to flash this firmware with repartition, because official stock fw didn't work for me neither.
Click to expand...
Click to collapse
I did it all
Yes it was the original usb cable..
Hello everyone,
I am new here... so please bear my mistakes....
I bought a Samsung galaxy ace GT-S5830 a year back..
And later i decided to try some custom roms..
I have CWM Recovery installed
I have rooted the device....
then i installed the S'Periance rom...
Now i want to sell my mobile so i want to get back to the stock rom....
I need help on how to get back to the stock rom (please give detailed Instruction
P.S :- When i connect the mobile to the computer the ODIN does not recognize it...
Any help is highly appreciated!!!
With regards,
Nik
Are you putting the phone in download mode? Hold volume down and home, then turn the phone on, then connect by USB. Odin should detect the phone now.
Sent from my Galaxy Ace
Click Thanks if I helped you.
nikhit5 said:
Hello everyone,
I am new here... so please bear my mistakes....
I bought a Samsung galaxy ace GT-S5830 a year back..
And later i decided to try some custom roms..
I have CWM Recovery installed
I have rooted the device....
then i installed the S'Periance rom...
Now i want to sell my mobile so i want to get back to the stock rom....
I need help on how to get back to the stock rom (please give detailed Instruction
P.S :- When i connect the mobile to the computer the ODIN does not recognize it...
Any help is highly appreciated!!!
With regards,
Nik
Click to expand...
Click to collapse
Check out my blog www.andro-sapien.blogspot.inHERE for a detailed procedure. Search for the thread OFFICIAL GALAXY ACE FIRMWARE. All the steps with screenshots are provided.
Sent from my GT-S5830 using xda app-developers app
Still not working
sauron82 said:
Are you putting the phone in download mode? Hold volume down and home, then turn the phone on, then connect by USB. Odin should detect the phone now.
Sent from my Galaxy Ace
Click Thanks if I helped you.
Click to expand...
Click to collapse
Yeah i even tried that but its of no use...
The odin won't recognize even if its in download mode!!!
OK
I will check it and will give you a response...
nikhit5 said:
Yeah i even tried that but its of no use...
The odin won't recognize even if its in download mode!!!
Click to expand...
Click to collapse
Did you install Samsung USB drivers?
nikhit5 said:
Yeah i even tried that but its of no use...
The odin won't recognize even if its in download mode!!!
Click to expand...
Click to collapse
Install Samsung Lies so your computer recognizes your phone, then never use it for anything. Then put the phone in download mode and try Odin again.
Sent from my Galaxy Ace
Click Thanks if I helped you.
sauron82 said:
Install Samsung Lies so your computer recognizes your phone, then never use it for anything. Then put the phone in download mode and try Odin again.
Sent from my Galaxy Ace
Click Thanks if I helped you.
Click to expand...
Click to collapse
he means samsung kies
NO USE!!!!
Buddhism said:
Did you install Samsung USB drivers?
Click to expand...
Click to collapse
I have all types of Samsung USB drivers installed!!!!!
NO USE!!!!
Buddhism said:
Did you install Samsung USB drivers?
Click to expand...
Click to collapse
Yeah i had installed it!!!
But still no detection from ODIN!!!!
NIL
sauron82 said:
Install Samsung Lies so your computer recognizes your phone, then never use it for anything. Then put the phone in download mode and try Odin again.
Sent from my Galaxy Ace
Click Thanks if I helped you.
Click to expand...
Click to collapse
I have installed everything... still my PC won't recognize my device!!!!
I even RE-INSTALLED WINDOWS SP (SP3)
nikhit5 said:
I have installed everything... still my PC won't recognize my device!!!!
I even RE-INSTALLED WINDOWS SP (SP3)
Click to expand...
Click to collapse
There is some problem with ur pc only I see as Odin will recognise ur device be it on any ROM. Now what may be the problem with your Pc.
1. Administrator rights not granted to odin.
2. Drivers not properly installed.
3. Windows USB drivers not installed properly.
4. USB drive not working (least possible)
Try running Odin AS ADMIN. Maybe it works.
Sent from my GT-S5830 using xda app-developers app
nikhit5 said:
Yeah i had installed it!!!
But still no detection from ODIN!!!!
Click to expand...
Click to collapse
Are you using a Samsung cable to connect your phone?
will try it
omega_warrior said:
There is some problem with ur pc only I see as Odin will recognise ur device be it on any ROM. Now what may be the problem with your Pc.
1. Administrator rights not granted to odin.
2. Drivers not properly installed.
3. Windows USB drivers not installed properly.
4. USB drive not working (least possible)
Try running Odin AS ADMIN. Maybe it works.
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
i
I will check it.....
Btw this Saturday I will make a video of my problem....
I think that might help you guys to understand my problem....
nikhit5 said:
i
I will check it.....
Btw this Saturday I will make a video of my problem....
I think that might help you guys to understand my problem....
Click to expand...
Click to collapse
hello, if the computer doesnt recognize the phone the problem seems to be in the drivers. Uninstall kies and drivers (control panel> programs), then download kies again, reboot computer and try to connect the phone. [if you have a custom rom is natural kies dont recognize it].
When appears the information of USB connection, switch the storage and see if it lets computer access the SD.
If this works, you can use ODIN, if not try this
If nothing works and you have access to another computer try to install the kies there and do everything there to see if work.
WRONG SECTION!!
WE HAVE A GREAT Q&A THREAD!!
Next time ask for help in q&a thread!
OK
qashqool said:
hello, if the computer doesnt recognize the phone the problem seems to be in the drivers. Uninstall kies and drivers (control panel> programs), then download kies again, reboot computer and try to connect the phone. [if you have a custom rom is natural kies dont recognize it].
When appears the information of USB connection, switch the storage and see if it lets computer access the SD.
If this works, you can use ODIN, if not try this
If nothing works and you have access to another computer try to install the kies there and do everything there to see if work.
Click to expand...
Click to collapse
I will follow your instructions...
And will inform the progress....
With regards,
Nik
nikhit5 said:
I will follow your instructions...
And will inform the progress....
With regards,
Nik
Click to expand...
Click to collapse
Hey, what happen when you go to download mode??
If nothing is showing, then it might be the invisible download mode(thats what they say ).
Send from Batman's Bat- Phone
Sorry dude. wrong section!
I thought this was ace-i .
Send from Batman's Bat- Phone
As the Title says I'm consistently getting a "USB Device not Recognized" error when I plug My SGA GT-S5830D in while in Download mode only. I've tried removing drivers and reinstalling every USB driver for my phone I could find with Windows 8 and no luck. I need download mode as i'm going to upgrade my phone and need to get it back to stock to trade it in. Any ideas? is there a way to reflash a stock rom and recovery with out ODIN? ARGGGGG!!!!
gordo1701e said:
As the Title says I'm consistently getting a "USB Device not Recognized" error when I plug My SGA GT-S5830D in while in Download mode only. I've tried removing drivers and reinstalling every USB driver for my phone I could find with Windows 8 and no luck. I need download mode as i'm going to upgrade my phone and need to get it back to stock to trade it in. Any ideas? is there a way to reflash a stock rom and recovery with out ODIN? ARGGGGG!!!!
Click to expand...
Click to collapse
Did you try in different USB port?¿
Have you got USB debug option enable?¿ (settings >>> aplications >>> development >>> USB debug mode)
Did you try in another PC?¿
Viper The Ripper said:
Did you try in different USB port?¿
Have you got USB debug option enable?¿ (settings >>> aplications >>> development >>> USB debug mode)
Did you try in another PC?¿
Click to expand...
Click to collapse
Ya I've tried four different usb ports, unfortunately a different cable and pc aren't really options atm. Is there a way to flash official roms without odin/download mode?
gordo1701e said:
Ya I've tried four different usb ports, unfortunately a different cable and pc aren't really options atm. Is there a way to flash official roms without odin/download mode?
Click to expand...
Click to collapse
well, you can try Mobile Odin modded for GalaxyAce, some time ago it was posted in Android Development, but I have never tried it :s I don't know if It's working properly or It might brick your phone so be careful mate
http://forum.xda-developers.com/showthread.php?p=35049645
much thanks mate! is there a way to unbrick it just in case?
gordo1701e said:
much thanks mate! is there a way to unbrick it just in case?
Click to expand...
Click to collapse
Yes, there is a tutorial to unbrick your phone, but I don't know if it would work if you brick it using Odin Mobile
Hey Viper, Just wanted to let you know that mobile odin worked like a charm!! Thanks So much!!!
gordo1701e said:
Hey Viper, Just wanted to let you know that mobile odin worked like a charm!! Thanks So much!!!
Click to expand...
Click to collapse
!!!
Great! I'm glad you've solved your problem
USB device not recognised error appears everytime, with every usb cable on every port. Phone is 100% working, comp 100% working, Windows 10. Am I have older version of Windows? What's the problem, it's so annoying I want to flash stock firmware and cannot do it due to this stupid bug.
Use another computer
Hello! I have a I900 and i installed Mackay kernel ICS Final Rom and fail.Phone enter in download mode,problem is the pc who doesn't recognize my phone...i install and reinstall the Samsung drivers but still dont recognize! Help me please!
Try a different USB port
pryerlee said:
Try a different USB port
Click to expand...
Click to collapse
still dont recognize
Any solution?
Boot into recovery then ''fix permissions''
pryerlee said:
Boot into recovery then ''fix permissions''
Click to expand...
Click to collapse
dont enter in recovery
Please help me guys