Database Develop

Help!!!! My htc wont connect to fastboot

Hey guys my htc is stuck on a boot loop so i try to connect fast boot to flash a new boot.img but my fastboot just says usb device not recognized please guys i really need help
My symptoms
Stuck on htc boot logo
Cannot access Recovery
Fastboot wont connect

Locky123 said:
Hey guys my htc is stuck on a boot loop so i try to connect fast boot to flash a new boot.img but my fastboot just says usb device not recognized please guys i really need help
My symptoms
Stuck on htc boot logo
Cannot access Recovery
Fastboot wont connect
Click to expand...
Click to collapse
Put the stock ROM on your sdcard and rename it from ROM.zip to ph39IMG.zip and go to bootloader.

mohamed_moscow said:
Put the stock ROM on your sdcard and rename it from ROM.zip to ph39IMG.zip and go to bootloader.
Click to expand...
Click to collapse
No luck it just goes through and says no image found

U got the HTC USB drivers?
Sent from my Vivid 4G using Tapatalk 2

ZeRo2o9 said:
U got the HTC USB drivers?
Sent from my Vivid 4G using Tapatalk 2
Click to expand...
Click to collapse
ok yes i can acess it but no matter what rom i install it is just stuck on the htc logo but i can access recovery

Locky123 said:
ok yes i can acess it but no matter what rom i install it is just stuck on the htc logo but i can access recovery
Click to expand...
Click to collapse
Did you ever find a solution to this? I am in the same boat now. I managed to flash carbon rom and used fastboot to flash boot.img but now I can't go back, fastboot seems broken. USB works fine within the ROM, just not from fastboot. USB Device Not Recognized. Not a driver issue, it's before it even tries to load the drivers.

rewen said:
Did you ever find a solution to this? I am in the same boat now. I managed to flash carbon rom and used fastboot to flash boot.img but now I can't go back, fastboot seems broken. USB works fine within the ROM, just not from fastboot. USB Device Not Recognized. Not a driver issue, it's before it even tries to load the drivers.
Click to expand...
Click to collapse
Are you using Windows 8? I found it does the same with my Sony phone. It sucks!

rewen said:
Did you ever find a solution to this? I am in the same boat now. I managed to flash carbon rom and used fastboot to flash boot.img but now I can't go back, fastboot seems broken. USB works fine within the ROM, just not from fastboot. USB Device Not Recognized. Not a driver issue, it's before it even tries to load the drivers.
Click to expand...
Click to collapse
Yea I fixed it I ended up flashing the kernal then flashing the rom then flashed the kernal once again and it works fine after that but i dont know how i could help any other way

Locky123 said:
No luck it just goes through and says no image found
Click to expand...
Click to collapse
Remember to put all letters in capital and also to relock your bootloader before using the zip file.

My 'USB Device Not Recognized' issue turned out to be Windows 8. I originally flashed my boot.img using Windows 7 at work and forgot that I'd done it from there, so I'd been under the impression that it worked once for me on Windows 8 so it should work again. But in fact, it never worked on Windows 8.
I installed Windows 7 on a second partition at home and it worked without issue. FYI I wasn't using USB 3.0 or anything and I tried a couple of Windows 8 PCs before resorting to installing Windows 7. It's also worth noting that the error in Windows 8 seems to happen before the actual drivers are installed/loaded, so it's not just a matter of picking the proper driver afaik. I did have the proper drivers and HTC Sync Manager, and tried forcing the driver install, but it didn't help. This also means you can't use a virtual machine to work around the issue.
Hope this helps others who run into the 'USB Device Not Recognized' error on Windows 8...
---------- Post added at 11:45 AM ---------- Previous post was at 11:45 AM ----------
Locky123 said:
Yea I fixed it I ended up flashing the kernal then flashing the rom then flashed the kernal once again and it works fine after that but i dont know how i could help any other way
Click to expand...
Click to collapse
Did you wipe data/factory reset after flashing? I didn't see you mention that anywhere. Also, are you sure you're using the right ROMs for the One XL (evita) and not the regular One X? Or the other way around in case you're in the wrong forum?

[Q] Can't get ADB to work on CM 10.1

I have everything setup properly yet i still can't get my pc to recognize my phone. Im using the latest nightly on 10.1. Any help is appreciated

Thismines said:
I have everything setup properly yet i still can't get my pc to recognize my phone. Im using the latest nightly on 10.1. Any help is appreciated
Click to expand...
Click to collapse
plug the in and you should get a popup on the screen asking if adb connection is allowed.

gunnyman said:
plug the in and you should get a popup on the screen asking if adb connection is allowed.
Click to expand...
Click to collapse
I tried this as well, I never get the prompt. I think its because my computer doesn't register that my phone has ADB on. I have made sure my drivers are all installed and the sdk

Thismines said:
I tried this as well, I never get the prompt. I think its because my computer doesn't register that my phone has ADB on. I have made sure my drivers are all installed and the sdk
Click to expand...
Click to collapse
check and make sure usb debugging is on.
remember to get to the developer options on CM10 you have to go to about phone and click on build number 10 times.

gunnyman said:
check and make sure usb debugging is on.
remember to get to the developer options on CM10 you have to go to about phone and click on build number 10 times.
Click to expand...
Click to collapse
yeah i've done that as well, its not registering on my pc that its enabled though

Thismines said:
yeah i've done that as well, its not registering on my pc that its enabled though
Click to expand...
Click to collapse
what recovery are you using? if its twrp try cwm as people have reported issues with adb and twrp

skinsfanbdh said:
what recovery are you using? if its twrp try cwm as people have reported issues with adb and twrp
Click to expand...
Click to collapse
I have cwm, 6.0.3.1 I believe. Idk if it makes a difference but I'm using the universal naked drivers for the m7

I had to install the android sdk for some reason to get mine working
Sent from my HTC One using xda app-developers app

Thismines said:
I have cwm, 6.0.3.1 I believe. Idk if it makes a difference but I'm using the universal naked drivers for the m7
Click to expand...
Click to collapse
it might but i dont know. i have been using all in one toolkit because it has worked for me when i was having issues with adb commands

[Q] Softbricked. No OS, will not mount. Help?

I got an AT&T HTC One last night from someone who said they had bricked it. They were actually beginners and someone else had rooted their phone, but he had deleted the OS. Here's what I know: It's loaded with TWRP (2.6), the phone fails to mount the USB, ADB Sideloading doesn't seem to work, When I reboot to Bootloader it says "***Tampered***, ***Unlocked***, and S-On." I also tried loading the phone in Fastboot USB and running the RUU with no luck since the computer can't seem to recognize the phone.
I know this is fixable and if I could get it to mount, I'd be golden. What do I do?
Thanks so much in advance for your help!

thesk8rguitarist said:
I got an AT&T HTC One last night from someone who said they had bricked it. They were actually beginners and someone else had rooted their phone, but he had deleted the OS. Here's what I know: It's loaded with TWRP (2.6), the phone fails to mount the USB, ADB Sideloading doesn't seem to work, When I reboot to Bootloader it says "***Tampered***, ***Unlocked***, and S-On." I also tried loading the phone in Fastboot USB and running the RUU with no luck since the computer can't seem to recognize the phone.
I know this is fixable and if I could get it to mount, I'd be golden. What do I do?
Thanks so much in advance for your help!
Click to expand...
Click to collapse
Use an OTG USB cable to flash a rom from a usb flash drive

n1234d said:
Use an OTG USB cable to flash a rom from a usb flash drive
Click to expand...
Click to collapse
No other workaround? Not a huge issue, I would just have to wait for the thing to be shipped to me.

thesk8rguitarist said:
No other workaround? Not a huge issue, I would just have to wait for the thing to be shipped to me.
Click to expand...
Click to collapse
Sideloading would've been the work-around, but since adb doesn't seem to be working, I guess not. You could try from a different comp or reflash your recovery and see if that helps.
Sent from my iPod touch using Tapatalk

n1234d said:
Sideloading would've been the work-around, but since adb doesn't seem to be working, I guess not. You could try from a different comp or reflash your recovery and see if that helps.
Sent from my iPod touch using Tapatalk
Click to expand...
Click to collapse
Let me make sure:
in TWRP I go to Advanced, then ADB Sideload, I swipe the bar at the bottom, then it says:
"ADB Sideload
Usage: adb sideload filename.zip
Updating partition details...
starting ADB sideload feature..."
From then, the loading bar just keeps going and there's never a change. So I know I'm doing it correctly, am I supposed to have something pulled up in the terminal on my comp when I do this? I have the SDK. Got to SDK>Platform-tools>adb in the terminal before connecting the USB? I swear I must just be doing one wrong step.

thesk8rguitarist said:
Let me make sure:
in TWRP I go to Advanced, then ADB Sideload, I swipe the bar at the bottom, then it says:
"ADB Sideload
Usage: adb sideload filename.zip
Updating partition details...
starting ADB sideload feature..."
From then, the loading bar just keeps going and there's never a change. So I know I'm doing it correctly, am I supposed to have something pulled up in the terminal on my comp when I do this? I have the SDK. Got to SDK>Platform-tools>adb in the terminal before connecting the USB? I swear I must just be doing one wrong step.
Click to expand...
Click to collapse
Yep, keep the rom in the same folder as the adb tools, and type
Code:
adb sideload rom.zip

n1234d said:
Yep, keep the rom in the same folder as the adb tools, and type
Code:
adb sideload rom.zip
Click to expand...
Click to collapse
And I'm assuming by rom.zip I should type the "[roms file name].zip"?

thesk8rguitarist said:
And I'm assuming by rom.zip I should type the "[roms file name].zip"?
Click to expand...
Click to collapse
Yeah

n1234d said:
Yeah
Click to expand...
Click to collapse
Error: Device not found
I plugged in the phone, rebooted into recovery, advanced, adb sideload, begin, then pulled up adb on the computer. correct order?

Are you using Windows or ubuntu?
Sent from my HTC One using XDA Premium 4 mobile app

bor3d2damax said:
Are you using Windows or ubuntu?
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Mac, actually. But I can give it a shot on Windows.

thesk8rguitarist said:
Mac, actually. But I can give it a shot on Windows.
Click to expand...
Click to collapse
Yea try it on Windows. Make sure you have adb installed.
Sent from my HTC One using XDA Premium 4 mobile app

bor3d2damax said:
Yea try it on Windows. Make sure you have adb installed.
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ADB installed, still not recognizing any devices.Is there any extreme measures to take? Starting to feel like my computers will never recognize the device as is.

Go into fastboot on your phone and try the command: "fastboot devices" on your computer, if it get recognized we can go further from there for finding your CID and flashing an RUU.
---------- Post added at 11:20 PM ---------- Previous post was at 11:18 PM ----------
Oh and hope you got the drivers installed in Windows, what version of Windows are you running?

milad407 said:
Go into fastboot on your phone and try the command: "fastboot devices" on your computer, if it get recognized we can go further from there for finding your CID and flashing an RUU.
---------- Post added at 11:20 PM ---------- Previous post was at 11:18 PM ----------
Oh and hope you got the drivers installed in Windows, what version of Windows are you running?
Click to expand...
Click to collapse
I rebooted into bootloader and made sure phone said Fastboot USB. In the terminal I typed cd [...]sdk/platform-tools, then typed adb which brought up all the commands for adb. I then typed "devices" it didn't recognize any devices attached, I then typed "fastboot", it brought up all the fastboot commands, I typed "devices" here and still no luck recognizing any devices.
I apologize for my slight noobness. I really do get a lot of this stuff, I'm just terribly stuck.

Alright follow my steps, and you will get it working today.
First tell me your Windows version

milad407 said:
Alright follow my steps, and you will get it working today.
First tell me your Windows version
Click to expand...
Click to collapse
All I can tell you now that I left the house is that it's Windows 8. I don't know the specific version number.

Does your mac have usb 2 or usb 3 ports? Also see if you can get a copy of Windows 7.

mojitochica said:
Does your mac have usb 2 or usb 3 ports? Also see if you can get a copy of Windows 7.
Click to expand...
Click to collapse
Here is the specs on my Mac. Macbook Pro (2011)

thesk8rguitarist said:
Here is the specs on my Mac. Macbook Pro (2011)
Click to expand...
Click to collapse
Hm, 15 or 17 inch? I'm asking because I know for a fact that macs with usb 3 can have connectivity issues.

How do push a file via TWRP on this phone?

well, I did something stupid and wiped everything, including the 2 zip files needed to flash the KK rom for Tmobile..
my twrp is working fine; is there a easy way to transfer the 2 zip files back onto my phone via twrp?
thanks!

Does adb work in or twrp? If so it's just
Adb push ZIPNAME /sdcard
Sent from my LG-D959 using Tapatalk

I dont know; there is an adb sideload command in twrp, but it doesnt seem to do anything; Plus I am not sure if my phone is connected via adb..
I know I have the right lg drivers on my computer, but when I run any adb command, the phone doesnt respond.

Honestly I think what you need to do is restart and just lgflash JB then you can just access your sdcard
Sent from my LG-D959 using Tapatalk

This is where external storage comes in handy
Sent from my LG-D959 using Tapatalk

you can say that again; this is the first phone that I have had in a long time without an sd card, and it was "mental muscle memory" that made me wipe everything..
Now, my phone is viewed as an F340k, since that's what the twrp on this phone is based on, so I wonder if I would have a problem using lg flash...this is a tmobile phone, but it might "think" its an f340k..
If I can flash the drivers for a f340 on my computer, then I might be able to adb sideload via twrp..otherwise I am not sure what will happen.
I have been leaving my phone just sit in recovery, as I dont know what would happen if I shut if off, and rebooted to system..
Hope its not brick city for me..

Well try to go to download mode and flash stock. You should be able to get back into recovery again if needed.
Sent from my LG-D959 using Tapatalk

wase4711 said:
you can say that again; this is the first phone that I have had in a long time without an sd card, and it was "mental muscle memory" that made me wipe everything..
Now, my phone is viewed as an F340k, since that's what the twrp on this phone is based on, so I wonder if I would have a problem using lg flash...this is a tmobile phone, but it might "think" its an f340k..
If I can flash the drivers for a f340 on my computer, then I might be able to adb sideload via twrp..otherwise I am not sure what will happen.
I have been leaving my phone just sit in recovery, as I dont know what would happen if I shut if off, and rebooted to system..
Hope its not brick city for me..
Click to expand...
Click to collapse
How did you make out? I have been trying to figure out what drivers I need for adb to recognize my phone in twrp. Hope you recovered

Got to adb sideload. Swipe to enable. Open up a command promp on computer and type adb sideload then place your zip file here and hit enter
Sent from my LG-LS980 using XDA Premium 4 mobile app

PattyNYC said:
How did you make out? I have been trying to figure out what drivers I need for adb to recognize my phone in twrp. Hope you recovered
Click to expand...
Click to collapse
Thanks, still can't get the phone to be recognized by the computer..
justinswidebody said:
Got to adb sideload. Swipe to enable. Open up a command promp on computer and type adb sideload then place your zip file here and hit enter
Sent from my LG-LS980 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I have been trying that; the problem is, that my phone now "thinks" its a f340k, and not a d959
I have been trying to install drivers so my win 8.1 machine can "see" the phone, so I can run adb sideload, but for some reason, I cant get it to "see" the phone in ADB..I keep getting a message in the command prompt, "device not found"
.I have downloaded drivers that "should" work, but its a WHQL win driver from LG, and it doesnt seem to have the proper drivers to enable my computer to "see" the phone in ADB..
Not a happy camper right now..

Maybe a usb otg would work if you put the rom.zip on the flash drive. There is an option to mount USB-OTG

PattyNYC said:
Maybe a usb otg would work if you put the rom.zip on the flash drive. There is an option to mount USB-OTG
Click to expand...
Click to collapse
I dont think that would help because my phone isn't being "seen" by my computer, while in twrp recovery
If I could just find the f340k driver by itself, without the WHQL "bundle", I think I could get it to recognize the phone, and then transfer files on to it..
I've looked everywhere, and cant seem to find that driver by itself anywhere..

Not sure but it worked on the similar G2 http://forum.xda-developers.com/showthread.php?t=2492911 sorry just read further in that thread and you may be right. sorry

I can get into download mode, but I cant get the lg flash tool to see the phone either...any suggestions at this point?
thanks
EDIT:
How can I boot to recovery at this point?
When I hold power and down, I get a screen with all Chinese writing on it, and my IEMI code on the bottom of the page..Power and up gets me the same thing..

another guess. I know with windows 7 the only way I could use fastboot was with the pdanet drivers otherwise my phone wouldn't connect to the pc. http://www.theandroidsoul.com/android-drivers-adb-and-fastboot-android-phones-tablets/

thanks, but the computer still doesnt see the phone..
do you know how I can get the phone into recovery at this point?
TWRP should still be on it, but I cant get i to boot into twrp.

wase4711 said:
Thanks, still can't get the phone to be recognized by the computer..
I have been trying that; the problem is, that my phone now "thinks" its a f340k, and not a d959
I have been trying to install drivers so my win 8.1 machine can "see" the phone, so I can run adb sideload, but for some reason, I cant get it to "see" the phone in ADB..I keep getting a message in the command prompt, "device not found"
.I have downloaded drivers that "should" work, but its a WHQL win driver from LG, and it doesnt seem to have the proper drivers to enable my computer to "see" the phone in ADB..
Not a happy camper right now..
Click to expand...
Click to collapse
Just flash the kdz files that is gona be the only way to fix that.

D-FUSE said:
Just flash the kdz files that is gona be the only way to fix that.
Click to expand...
Click to collapse
I've been trying all day to do just that, but my phone isnt being seen by my computer..
I think the problem is that my phone is a d959 tmo, but, the freedomflex recovery installed,(twrp) has changed my phone to a f340k, and I cant get any drivers to recognize the phone, so without that, I can't do anything with it..
Since the last working thing was TWRP recovery, is there a way for me to boot into twrp at this point?
All I can do is get in download mode, or another mode which shows all Chinese text/language on it, with my IEMI code on the bottom of the page..
Otherwise, I will have to ebay this thing, and hope someone with more dev skills than me can restore it somehow..
thanks!

wase4711 said:
I've been trying all day to do just that, but my phone isnt being seen by my computer..
I think the problem is that my phone is a d959 tmo, but, the freedomflex recovery installed,(twrp) has changed my phone to a f340k, and I cant get any drivers to recognize the phone, so without that, I can't do anything with it..
Since the last working thing was TWRP recovery, is there a way for me to boot into twrp at this point?
All I can do is get in download mode, or another mode which shows all Chinese text/language on it, with my IEMI code on the bottom of the page..
thanks!
Click to expand...
Click to collapse
Are turning off your antivirus and editing the host file
Sent from my LG-D959 using Tapatalk
---------- Post added at 01:55 PM ---------- Previous post was at 01:55 PM ----------
D-FUSE said:
Are turning off your antivirus and editing the host file
Sent from my LG-D959 using Tapatalk
Click to expand...
Click to collapse
Have you tried a different port
Sent from my LG-D959 using Tapatalk

Or different computer all together. The aboot and recovery shouldn't mess up your drivers
Sent from my LG-D959 using Tapatalk

Sigh, Im an Idiot after all these years with android. I accidentally wiped everything

So I rooted my phone HTC one verizon m7 with sunshine and towelroot and it worked. It has been awhile since i flashed and installed roms.
So I installd TWRP and roms , The rom wouldnt work and it would go back to TWRP. and I Forgot to back up/nandroid then i panicked - Accidentally wiped everything...now I'm stuck in TWRP with nothing in it. NO rom's no back up .
ADB sideload gets stuck trying load in TWRP or mount wont recognize on my computer. Please help. Will gladly donate if I can gee this fix in couple hours

Install this recovery http://mdmower.cmphys.com/download/317/?version=2.8.1.1
Then connect the device to your computer and you should see the storage connected as MTP. Copy your Rom to it like you do normally and flash. Maybe you must wait a little before the storage appears connected to the computer.

cyrusct82 said:
Install this recovery http://mdmower.cmphys.com/download/317/?version=2.8.1.1
Then connect the device to your computer and you should see the storage connected as MTP. Copy your Rom to it like you do normally and flash. Maybe you must wait a little before the storage appears connected to the computer.
Click to expand...
Click to collapse
thanks for reply but how ? I am on TWRP nothing else and nothing is being recognized

Hoygl3n said:
thanks for reply but how ? I am on TWRP nothing else and nothing is being recognized
Click to expand...
Click to collapse
check the Frequently Asked Question sticky page 3

thank you i was able to install the recovery through adb but I cant adb push my rom for some reason as if it saying device not found

Hoygl3n said:
thank you i was able to install the recovery through adb but I cant adb push my rom for some reason as if it saying device not found
Click to expand...
Click to collapse
Just copy/paste it. Like any other file.

cyrusct82 said:
Just copy/paste it. Like any other file.
Click to expand...
Click to collapse
Thank you once again. Was able to fix my phone before work. I will keep my word and donate to you guys sometimes this week
Sent from my HTC One using XDA Free mobile app

Hoygl3n said:
Thank you once again. Was able to fix my phone before work. I will keep my word and donate to you guys sometimes this week
Sent from my HTC One using XDA Free mobile app
Click to expand...
Click to collapse
There is no need for donation. If you want to donate give it to some poor people in your area our to the devs of the Rom/kernel you are using.