Related
Tried flashing an I9000 rom over a previous I9000 rom and now the phone doesn't boot up all the way. It gets past the AT&T World phone and Samsung splash screens but then goes to a blank screen in which the capacitive buttons are responsive and the phone will vibrate once, accompanied by 2 faster vibrations.
I've tried all the different button holds to get into download mode but none of them seem to work. ADB doesn't work either so Odin3 isn't an option atm.
Is my only option to buy a dongle to force download mode?
yes, you need to buy/make a jig. once you get your phone into download mode, you need to flash the stock rom with the button fixes, as you should have done before flashing anything else.
Read the sticky and try the other method before getting a jig... might work
Sent from my SAMSUNG-SGH-I897 using XDA App
If all else fails you can make a cheap jig with 3 resistors and no soldering for under $1 from radio shack... search the captivate forum for 3 resistor jig
you said the 3 button doesn't work, but did you try pulling the battery, SIM and micro SD out, then plug into computer, then hold volume UP and Down and THEN insert the battery while connected to PC and pressing both volume buttons, should go to download in a second. at least mines did when none of the 3 button combination worked
slifer315 said:
yes, you need to buy/make a jig. once you get your phone into download mode, you need to flash the stock rom with the button fixes, as you should have done before flashing anything else.
Click to expand...
Click to collapse
Yah, forgot about the whole flashing back to stock thing since I hadn't used the thing for a couple weeks now. I'd only been using an Incredible for different roms. I think I'll just make a jig later.
dq13 said:
you said the 3 button doesn't work, but did you try pulling the battery, SIM and micro SD out, then plug into computer, then hold volume UP and Down and THEN insert the battery while connected to PC and pressing both volume buttons, should go to download in a second. at least mines did when none of the 3 button combination worked
Click to expand...
Click to collapse
Is there any reason this wouldn't work? I tried it on my captivate and can't get it in download mode.
EDIT: Is it possible at all to boot into cwm and flash a nandroid backup?
paperclips said:
Is there any reason this wouldn't work? I tried it on my captivate and can't get it in download mode.
EDIT: Is it possible at all to boot into cwm and flash a nandroid backup?
Click to expand...
Click to collapse
Yes because you have no 3button combo. Your only bet would be to use a jig to get into download mode. And no I would not even try to do a nandroid backup because those can cause the same issue unless you are running the same Kernel as the backup.
Ok, have made the jig and am now in download mode. One problem though, even though I have the drivers installed for Windows X64, it is being read as an unknown device. So still no luck with Odin.
Any ideas?
Anyone help?
paperclips said:
Anyone help?
Click to expand...
Click to collapse
Try win 32 driver
Or google samsung captivate
Go to web page for device
Near bottom is a link to download manual, click, should be a link for software, click, download drivers from there.
You may have top direct your computer to the drivers, when you get the unknown device click direct computer to where the drivers are
Sent from my SGH-I897 using XDA App
mcord11758 said:
Try win 32 driver
Or google samsung captivate
Go to web page for device
Near bottom is a link to download manual, click, should be a link for software, click, download drivers from there.
You may have top direct your computer to the drivers, when you get the unknown device click direct computer to where the drivers are
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
I got the computer to recognize the drivers after messing around with some stuff but now Odin3 is stuck at file analysis.
Have to do it in order
Turn up odin
Plug in the device into download mode
Sent from my SAMSUNG-SGH-I897 using XDA App
avgjoegeek said:
Have to do it in order
Turn up odin
Plug in the device into download mode
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
+ 1 make sure odin us fully booted prior to plugging phone in. you are almost there
Sent from my SGH-I897 using XDA App
avgjoegeek said:
Have to do it in order
Turn up odin
Plug in the device into download mode
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
That's what I did and still nothing. I'll just keep trying it and let you know if I vet it working.
I had the same issue and still no luck. In download mode and even pointing it to drivers doesnt work. Like its not recognizing it as a android device even though its in download mode
I have videos for ODIN...Check my sig...
Ok, after about 1000 tries and getting ready to lose hope, I got it to work by holding it a different way. I think it was just a USB cord problem in the end. Thanks everyone for your help. Unfortunately, my other phone, Samsung Focus, took an unfortunate fall preceeding this fix making this win feel kind of insignificant.
Hi Experts,
I have a Cappy and i love Continuum 5 ROM. I never miss any versions from beta2 to RC 3, everything is ok, but now when contimuum v5.1 was released. I tried to flash it but i got a big problem in that version. The first, i encountered Boot Loop issue while booting, but it's not the biggest problem, my cappy is still boot up to the home screen, and here everything was became very bad. My Cappy got lag and cant interact with return and it reboot automatic after that.
Now, when v5.1 was released, i believed it'll be fixed, but it's still exists. .
my cappy cant boot up to home screen. it repeats booting to continuum animation and restart forever.
can anybody give me a suggestion for turning my cappy back !!!!!!!! Please help
Did you have full battery? I made this mistake too... Be sure that you did everything correctly..
Sent from my captivate using XDA App
I would suspect you could simply use the 1-CLICK ODIN program to restore the phone then follow the steps carefully for 5.1 (which is a pretty awesome ROM btw)
I'm sure i charged full battery before flashing.
ProBoner said:
I would suspect you could simply use the 1-CLICK ODIN program to restore the phone then follow the steps carefully for 5.1 (which is a pretty awesome ROM btw)
Click to expand...
Click to collapse
i flashed to stock room with odin3 1.7 (using PDA + PIT files. i did that successful many times with 2.2 ). but now, with 2.3.3 i got brick( maybe lost boot), although flashed by odin without any errors ( 1 succeed/ failed 0) .
now i cant make the cappy go to download mode. please helppppp.
3 buttons with no interaction !!
sounds like u flashed a stock rom that didnt have old bootloader, safe way to have done it is with non 3 button fix odinoneclick flash to stock. dunno if a JIG will help u get back into download mode
CremeFraiche said:
sounds like u flashed a stock rom that didnt have old bootloader, safe way to have done it is with non 3 button fix odinoneclick flash to stock. dunno if a JIG will help u get back into download mode
Click to expand...
Click to collapse
Really, can i get back by using JIG ? My cappy cant boot up anymore. still pess power button but nothing was display.
longdct said:
Really, can i get back by using JIG ? My cappy cant boot up anymore. still pess power button but nothing was display.
Click to expand...
Click to collapse
You do know that download mode volume down and power, or volume down and usb connection? Figure might as well say cause I had what looked to be black screen before, but went in download mode. And can you not odin one click?
Ps. I have had stay black till reboot but if it give com port even with black screen it is in download mode
Sent from my GT-I9000 using XDA Premium App
leezrd said:
You do know that download mode volume down and power, or volume down and usb connection? Figure might as well say cause I had what looked to be black screen before, but went in download mode. And can you not odin one click?
Ps. I have had stay black till reboot but if it give com port even with black screen it is in download mode
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
Thanks Leezrd, i tried these methods but nothing was happened. the Odin3 cant recognize any com port
longdct said:
Thanks Leezrd, i tried these methods but nothing was happened. the Odin3 cant recognize any com port
Click to expand...
Click to collapse
Have you tried odin one click I heard that if odin 3 doesn't work odin one click will
Sent from my GT-I9000 using XDA Premium App
leezrd said:
Have you tried odin one click I heard that if odin 3 doesn't work odin one click will
Sent from my GT-I9000 using XDA Premium App
Click to expand...
Click to collapse
I wish i have a chance to do this. but now i cant go to download mode. it makes me so sad.
longdct said:
I wish i have a chance to do this. but now i cant go to download mode. it makes me so sad.
Click to expand...
Click to collapse
Get a jig and use it to get into DL mode. Please make 100% sure you know what you are doing before you flash.
longdct said:
I wish i have a chance to do this. but now i cant go to download mode. it makes me so sad.
Click to expand...
Click to collapse
Use command command prompt. "/android" Then "adb shell" then "su" then "roboot download" might not work with adb but could give it a try
Sent from my GT-I9000 using XDA Premium App
zelendel said:
Get a jig and use it to get into DL mode. Please make 100% sure you know what you are doing before you flash.
Click to expand...
Click to collapse
thanks for your help. if it really lost bootloader, JIG has any effect? if terrible thing is true. can u tell me how i can do to relive my phone ?
longdct said:
thanks for your help. if it really lost bootloader, JIG has any effect? if terrible thing is true. can u tell me how i can do to relive my phone ?
Click to expand...
Click to collapse
Your best bet is the jig. If that doesnt work then I would try and get a warrenty replacment. I went over the thread and it stated that if you get a bootloop you should boot into recovery and reflash the rom, did you do that?
longdct said:
thanks for your help. if it really lost bootloader, JIG has any effect? if terrible thing is true. can u tell me how i can do to relive my phone ?
Click to expand...
Click to collapse
If you lost bootloader then you will have to JTAG, if your under warranty you can say you were updating to froyo and it turned off and never turned back on
Sent from my GT-I9000 using XDA Premium App
zelendel said:
Your best bet is the jig. If that doesnt work then I would try and get a warrenty replacment. I went over the thread and it stated that if you get a bootloop you should boot into recovery and reflash the rom, did you do that?
Click to expand...
Click to collapse
he can't get a turn on so probably not able to get in recovery but to OP with gb recovery is volume up and power
Sent from my GT-I9000 using XDA Premium App
i was having some issues gettin my captivate into download mode using odin to go back to stock also. what worked for me however was to have usb plugged into comp and phone and THEN hold volume up and down. port was then recognized and i went to download. badda bing badda boom.
zelendel said:
Your best bet is the jig. If that doesnt work then I would try and get a warrenty replacment. I went over the thread and it stated that if you get a bootloop you should boot into recovery and reflash the rom, did you do that?
Click to expand...
Click to collapse
right. i got a bootloop when flash to v5.2. i tried to flash the rom in recovery mode many times, but it's still exists. even i flash back to RC3. i got only the android text animation on the screen.
thus i have to flash to the stock by that way. and now i got a brick
I've had problems in the past with getting to download mode on the cappy. I did some googling trying to find a way, ended up finding a very good page on it:
http://samsungcaptivate.wikia.com/wiki/Putting_the_Phone_into_Download_Mode
I hope that helps.
Had the same problem with my cappy. The problem is that after all you did, you have one bootloader from i9000 and another from i897. The jig won`t help. I`ve found the people that recovered the phone with JTAG.
After looking for quite a few hours on google and xda the only solution thats shows up is to use a jtag and quite frankly that scares the pants off me
here is what happened
-i upgraded the device to froyo then did the super one click root in order to root
-after that i installed the modified recovery to turn off the signature check
-after doing that i flashed clockwork mod renamed update.zip through recovery
-after that i flashed the ICS beta but i could not get the main zip to work through recovery the only other zip i had on my sd card was the kernel so i flashed that and it worked, in clockworkmod 5.0 it wiped everything on the phone so i reloaded the 2 zips i flashed the rom there and it rebooted. (this is out of order from the thread so i know this is what causes the next problem.
now when ICS boots up i get an encryption unsuccessful screen saying i need a factory reset, only option given is reboot now. can't bypass the screen, can't access via adb (driver install fails on windows too), cant get into download mode, and can't get into recovery.
how screwed am i
device is
Samsung captivate
-build number 1009
You need Gingerbread bootloaders.
And since you cant get into download mode... You probably need a USB Jig.
Good news is that you see something at startup. I doubt you are totally screwed then.
Second the jig as an option. It has quite the track record on this forum as making the captivate almost un-brickable.
What have you tried as far as getting your phone into download mode? There are sometimes multiple ways (Vol-up + Vol-down while plugging in USB without battery, sim, or microsd installed is how I always seem to get it working). Here is a list:
http://samsungcaptivate.wikia.com/wiki/Putting_the_Phone_into_Download_Mode
To my knowledge, none of that information is dated... but there are those here that know far more about it than I ever will.
none of those methods worked, it just stinks if it would have been any other rom i would have been fine i think but since i can't do anything in user space and everything i do takes me to the ICS android screen i cant do anything.
also for the record i am a noob to samsung devices but i have been doing this stuff to HTC devices for years
Why does he need GB bootloaders?!?
And just boot into recovery factory reset.
Sent from my SGH-I897 using xda premium
b-eock said:
Why does he need GB bootloaders?!?
And just boot into recovery factory reset.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
I have no recovery or download mode or atleast nothing is letting me into them
Sent from my Touchpad using Tapatalk
b-eock said:
Why does he need GB bootloaders?!?
And just boot into recovery factory reset.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
He flashed ICS over froyo... are froyo bootloaders compatible?
Im assuming not and thats what caused the brick. Either that or CWM5 doesnt like froyo BL's. Either way.
erbsmokah said:
He flashed ICS over froyo... are froyo bootloaders compatible?
Im assuming not and thats what caused the brick. Either that or CWM5 doesnt like froyo BL's. Either way.
Click to expand...
Click to collapse
They are compatible...
Sent from my SGH-I897 using xda premium
Did you try this method to get into download mode?
1. Turn off phone, remove sim, battery, sd
2. hold both volume buttons, keep holding for remainder of instructions
3. insert usb
4. insert battery
This has instantly granted download mode on every captivate i've ever tried.
b-eock said:
They are compatible...
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
The team hacksung project might be compatible, but the straight port says in the op that you need to flash kf1 first, which included bootloaders.
You aren't hard bricked and your device is recoverable.
If you are still on the froyo bootloaders, try unplugging the usb cable, removing the battery, sim and sd cards, hold vol up+vol down (don't hold power), and plug the usb cable back in. It should take you to download mode.
If your phone responds to adb while it's booting, you can just issue a quick 'adb reboot download' or 'adb reboot recovery' to get it to boot into either without the button combos.
If either of those don't work, you can try forcing it with a usb jig (just a 301k resistance over pins 4 and 5 of the microusb port). Build a jig, take the battery out, plug the jig in, make sure not to touch the jig while it's in or you'll change the resistance and won't work, put the battery back in and it should kick your phone into download mode. Once you're there, simply remove the jig and plug the usb cable back in.
Sometimes the download mode graphic won't show up even if you are actually in download mode. If the phone looks like it hung, try connecting it to Odin anyway and see if it recognizes it.
Edit: forgot to mention, try using adb from linux (virtual machine or livecd will work too). You shouldn't have to mess with drivers and it's worth a shot.
modest_mandroid said:
You aren't hard bricked and your device is recoverable.
If you are still on the froyo bootloaders, try unplugging the usb cable, removing the battery, sim and sd cards, hold vol up+vol down (don't hold power), and plug the usb cable back in. It should take you to download mode.
If your phone responds to adb while it's booting, you can just issue a quick 'adb reboot download' or 'adb reboot recovery' to get it to boot into either without the button combos.
If either of those don't work, you can try forcing it with a usb jig (just a 301k resistance over pins 4 and 5 of the microusb port). Build a jig, take the battery out, plug the jig in, make sure not to touch the jig while it's in or you'll change the resistance and won't work, put the battery back in and it should kick your phone into download mode. Once you're there, simply remove the jig and plug the usb cable back in.
Sometimes the download mode graphic won't show up even if you are actually in download mode. If the phone looks like it hung, try connecting it to Odin anyway and see if it recognizes it.
Edit: forgot to mention, try using adb from linux (virtual machine or livecd will work too). You shouldn't have to mess with drivers and it's worth a shot.
Click to expand...
Click to collapse
i will try it out the jig is the last thing i want to do, luckily this isnt my everyday phone but i would like to get it working hopefully
thank you everyone for the help expect me to hit some thank buttons soon
Were you able to get this working again? If so, how? My Captivate with Build 11 of ICS that had been running perfectly for a week got the message you saw regarding encryption.
I couldn't reset, I tried one click back to stock, and now I just get messages saying can't mount /dev/block/mmcblk0p1.
Unbricking Cappy
Are you able to go to CWM using the three button combo? Try pulling out the battery, reinsert, Hold vol-up + vol-down
and hit power button. Let me know whether CWM menu is appearing or not
All I have to say is wow, not one of those things are true
UCKF1 was the first GB leak for the Captivate, not official Froyo wtf :S
you also don't just connect and power on?!
Who ever needs help, don't listen to this dude, he obviously doesn't know his facts!
Short answer is problem was solved by my friend having a jtag jig
Sent from my PG86100 using XDA App
thoughtlesskyle said:
Wait who is this directed at, if its at me cool dude sorry for asking for help, the answer you have given has been invaluable to solving the problem. This was solved turns out a friend of mine had a jig, glad you went out of your way to lend a useless opinion
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Yahh you meed to edit your post, that wasn't to you it was to ROMMaker. So don't get your panties in a wad.
Sent from my SGH-I897 using xda premium
b-eock said:
Yahh you meed to edit your post, that wasn't to you it was to ROMMaker. So don't get your panties in a wad.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
I don't know what good editing my post will do since you quoted it but sure
Sent from my PG86100 using XDA App
Other people who have this issue, try this:
http://forum.xda-developers.com/showthread.php?t=1447303
thoughtlesskyle said:
Short answer is problem was solved by my friend having a jtag jig
Sent from my PG86100 using XDA App
Click to expand...
Click to collapse
Hey,
Could you tell us more about how it was resolved?
I'm having the same issue here.
helped a friend out about 4 months ago by flashing kg3 onto his galaxy s after it would crash repeatedly saying 'internal process (android system) error, must forceclose' and after that it worked fine,
but yesterday he said it won't boot up, won't go into download or recovery, the only screen interaction he can get is when it's plugged in it will say battery 100% charged,
when i plugged it into keys the computer beeped then said 'keys 2.0 doesn't recognize this phone' .... help please?!
Have you tried removing and re-inserting the battery? At times after doing that you are atleast able to get into the download mode.
you wil have to re install firmware
Ya I have tried that, still no download mode, and I obviously know I have to reinstall firmware but how could I do that with no download mode
Sent from my GT-I9000 using XDA App
Build a usb jig
Sent from my GT-I9000 using xda premium
usb jig could help you http://forum.xda-developers.com/showthread.php?t=819551
If you dont have luck with usb jig, try THIS
carmanj16 said:
Ya I have tried that, still no download mode, and I obviously know I have to reinstall firmware but how could I do that with no download mode
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
just double check. if you used to be able to get download mode then you shoud be able to get in it again. sgs are fairly hard to break. try removing the battery at full charge and leave all cables out when you do remove it . do the button combo and you should be good. after that happy flashing
hey guys, i believe i acquired a soft bricked galaxy s last night. from what the girl told me, it had been rooted, custom rom installed, and im guessing a kernel aswell.it gets past the "world phone" screen then gets stuck at the glowing android coming out of the ground. Im assuming its a kernel problem. ive tried alot of methods on here, searched alot of the forums on these phones being soft bricked. tried the vol+,home, power; vol-,home, power; both volumes, power; also tried with connecting usb and odin open; both volumes, connect usb, input batt; vol-, connect usb, input batt; ectect. i just cant get past that boot logo. I have the drivers from samsung installed but when connecting to the computer it registers that something connected but doesnt identify the phone. so is there anything i am missing guys? i read about the jig and i am guessing thats where im gonna have to go with this. no problem there; just seeing if anyone has any other ideas. thanks in advance guys!
coltlacey1 said:
hey guys, i believe i acquired a soft bricked galaxy s last night. from what the girl told me, it had been rooted, custom rom installed, and im guessing a kernel aswell.it gets past the "world phone" screen then gets stuck at the glowing android coming out of the ground. Im assuming its a kernel problem. ive tried alot of methods on here, searched alot of the forums on these phones being soft bricked. tried the vol+,home, power; vol-,home, power; both volumes, power; also tried with connecting usb and odin open; both volumes, connect usb, input batt; vol-, connect usb, input batt; ectect. i just cant get past that boot logo. I have the drivers from samsung installed but when connecting to the computer it registers that something connected but doesnt identify the phone. so is there anything i am missing guys? i read about the jig and i am guessing thats where im gonna have to go with this. no problem there; just seeing if anyone has any other ideas. thanks in advance guys!
Click to expand...
Click to collapse
A jig will force download mode but is only needed is vol down + power button doesn't get you in it.
Do you know if she was on gb and up? That would change your button combo to get in recovery to vol up + down + power button.
If you can get in recovery that way, you have 2 options: 1- clear cache and dalvik (in advanced) and try rebooting. 2- reflash the custom ROM she was running (without deleting anything).
If recovery doesn't work, get in download mode and flash Odin KK4 without bootloaders (in dev section). From there, you'll need to flash Corn kernel with Odin 1.85 and you'll be able to get in recovery to flash the ROM and Gapps she was running. *Doing this will wipe her apps and apps data*
Sent from my SGH-I897 using xda app-developers app
BWolf56 said:
A jig will force download mode but is only needed is vol down + power button doesn't get you in it.
Do you know if she was on gb and up? That would change your button combo to get in recovery to vol up + down + power button.
If you can get in recovery that way, you have 2 options: 1- clear cache and dalvik (in advanced) and try rebooting. 2- reflash the custom ROM she was running (without deleting anything).
If recovery doesn't work, get in download mode and flash Odin KK4 without bootloaders (in dev section). From there, you'll need to flash Corn kernel with Odin 1.85 and you'll be able to get in recovery to flash the ROM and Gapps she was running. *Doing this will wipe her apps and apps data*
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
yea, whatever happens to the phone doesnt matter, its mine now, was just given to me. sadly idk what rom she was running, her sd card is MIA, and idk what OS she was running on. i highly doubt she would even know. so at this point after trying all the button combos, think a jig is the only option?
What happens if u pull the battery, replace it, leave phone off, phone must be off, connect usb end of cable to ur pc, hold both volume up and down together and then insert micro usb into phone ??
Download mode yes or no ?
If no see my sig below (if ur on a pc or in a web browser)...there are links there on how to make a Jig and/or where to buy a Jig.
Sent from my SGH-I777 using xda premium
4-2ndtwin said:
What happens if u pull the battery, replace it, leave phone off, phone must be off, connect usb end of cable to ur pc, hold both volume up and down together and then insert micro usb into phone ??
Download mode yes or no ?
If no see my sig below (if ur on a pc or in a web browser)...there are links there on how to make a Jig and/or where to buy a Jig.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Same story man. Probably gonna be jig is what it is looking like. Any ideas what cause this to happen? Ex. Not being able to enter recovery/download by using proper button combos?
Just a known issue on some Capivates. But the flash up to GB firmware is the fix for the button combos failin to work. Once u have the GB BLs ur button combos should work.
So once u get a jig, Odin or Heimdall up to KK4 with Bootloaders (heed all warnings about flashin BLs). Then u can Odin KK4 Corn Kernel and proceed where u wish.
Sent from my SGH-I777 using xda premium
Thanks for responding. I'll probably tear into it tomorrow. Have a link to kk4 w/boot have thee corn kernel saved
Here is Stock KK4....http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SGH-I777 using xda premium
Beauty! So that should wake it up. And from there I can reboot, find out what is it has then flash a new ROM after making sure recovery works and whatnot?
After the Stock kk4 flash it will have....Stock i897ucKK4 Gingerbread 2.3.5 Firmware.
So afterwards u will need to use Odin to flash the .tar file version of the KK4 Corn Kernel in order to get cwm recovery and go from there in the flashin of dev roms if u want.
Sent from my SGH-I777 using xda premium
4-2ndtwin said:
After the Stock kk4 flash it will have....Stock i897ucKK4 Gingerbread 2.3.5 Firmware.
So afterwards u will need to use Odin to flash the .tar file version of the KK4 Corn Kernel in order to get cwm recovery and go from there in the flashin of dev roms if u want.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
Little precision: Odin one click is what you'll be using to flash KK4 (stock gb firmware). Odin 1.85 is what you'll need to flash Corn kernel (.tar is PDA slot).
Sounds great. Should be able to get it done today
well i built a jig using the three resistors from radioshack and a micro usb cable i found laying around. doesnt appear to be working...
ok, so i needed an actual samsung cord......plugged it into my computer and it started charging
ok, got it! now searching for correct drivers. apparently i had the wrong ones
coltlacey1 said:
ok, got it! now searching for correct drivers. apparently i had the wrong ones
Click to expand...
Click to collapse
See this post....http://forum.xda-developers.com/showthread.php?p=33279682.
And that thread may prove helpful to ya. :thumbup:
Sent from my SGH-I777 using xda premium
downloading the stock kk4 now. ok, so what about the root it had? doesnt this dispose of root? or will it still be rooted? and is there anything in particular in odin i need the check mark before flashing the two files?
well ok so the file should tell me what i need to do. says it has instructions
do i have to root to install?
coltlacey1 said:
do i have to root to install?
Click to expand...
Click to collapse
Nope...The KK4 one click has instructions included. :thumbup:
After the successful flash of the KK4 one click, just use this...it will get u Root and KK4 Corn Kernel v7.0A so that u can have CWM Recovery....[Utility]KK4 Easy Root
Sent from my SGH-I777 using xda premium