Hi,
I'm having some trouble with my GT-I9070 after accidentally flashing latest Brittish Virgin rom to the device. After flashing the device just hang at the new Virgin logo, and both recovery mode and download mode was non working using volume+/- home and power combination.
So I bought a USB Jig in hope of fixing the phone. However after using the guide for downgrade back to 2.3.6 and flashing the correct rom (I9070XXLK2_I9070OXXLI1_NEE) for my phone I noticed that I'm still unable to enter recovery or download the normal way, can reach them using adb commands. And also sound is non working now, I can make a call but no sound in either ends, no sound when pressing dial keys even though this is enabled. Entering recovery says something about unable to mount EFS, however if I press *#06# it shows my IMEI and like I said I can make phonecalls just not hear anything. It was working before using cm10.1, and I just wanted to restore the phone to factory rom before handing it over to a colleague.
I've also tried restoring cm10.1, but even though I've cleared data and cache it still hangs at cm bootsplash.
Anyone who's got some idea on how to fully restore volume+/- functionality and phone call sound?
Related
Hi,
I've flashed multiple times before without an issue until today.
First, here's my background information:
Samsung Captivate (ATT)
Was running Continuum 5.4.1 but it felt laggy so I attempted to flash MIUI 1.5.13.
Here's what I did:
I wiped my phone using the Odin One click tool, then flashed CM7's kernel and then performed formats of the cache, system, and data, then installed MIUI RC2. After this step the phone should have restarted, then I planned to shut it down and reboot into recovery and flash 1.5.13 onto it.
My problem(s):
-Boot into recovery/download mode using key combinations is not working.
-The ADB console reports device not found when I try to run adb shell.
-The phone is undetected in Droidexplorer.
-When I attempt to download an app to boot to recovery with the phone says there is no space even though nothing has been installed other then MIUI.
What I would like to do:
Get back to stock with download/recovery modes working.
On a side note: MIUI works, but in a very limited way. I can navigate through it, but it won't allow the installation of applications due to there not being room on the phone (as said before).
Thanks!
Update - my phone was being identified as a Nexus S, so without those drivers my phone could not be debugged via USB. I now have the drivers and can perform ADB commands, however rebooting into recovery and into download mode both result in the phone restarting without going to the download or recovery mode.
Try using ODIN and repartitioning. I have good videos on standard ODIN and Heimdall on YouTube just search them. If you can not get out of this contact me, I have been able to partition debrick in the past and it's actually considered by me far more annoying than standard bootloader JTAG in certain situations. Let's hope yours is easier to bail out of!
First of all thanks for the reply and direction.
Secondly:
After working on this all last night I was able to get the phone recognized by Odin and my computer, now I am stuck at one of two screens depending on what I do.
If the phone is powered off then plugged in, the battery charging screen appears but there is no animation and after unplugging it the battery charging image remains.
If I power the phone on it hangs on the Samsung boot screen.
Repartitioning does sound like the proper direction for me to take, but, when I use Odin it freezes while setting up the connection to the phone.
when the phone is powered off try holding both vol keys and plugging in the cable. That could possibly get you to download mode. If not try vol down/pwr at the same time since you are now on GB bootloaders the keys are a bit different. Let me know what happens and good luck
maybe you should try to build a jig and use it to get into the download mode first. or you can buy it on ebay, just search for "micro usb jig".
I've tried every volume and power combination possible to no avail, I can't get into download mode. I've given in and am exchanging my phone. Thanks for the help anyway guys!
hi, yes i will admit i am still very new to the whole rooting/flashing/mods etc, but i f-ed up my captivate bad... first i should tell ya how i got to the point where i am now... (dont worry will be the abridged version):
-got phone, couldnt sideload apps
-rooted phone and enabled install of sideloaded apps
-tried to backup rom/phone with clockwork, learned that i had to flash modded kernal
-backed up and flashed new kernal (flashed clockwork recovery & backed up rom)
-learned about voodoo, so reflashed a voodoo kernal
-started to have issues with static, speaker volume, basically anyone who called me or i called couldnt hear me and was all static
-reflashed different kernal
-got ballsy, backed up rom again, and all user/system data, and attempted to flash custom rom (firefly3.0)
-flash failed... tried to reflash, failed again... error said parameters did not match
-tried restoring original backed up rom, failed again, and again...
-then, boom, phone boots up and am able to make calls and receive them, cant send text though..
-scoured the forums, and tried to fix phone/restore to stock.
-flashed odin, and then BRICKED!!!!
*NOW ALL PHONE DOES WHEN I TURN IT ON IS BOOT TO ATT SCREEN AND THEN OFF, THEN ATT SCREEN, THEN OFF.. TRIED BOOTING INTO RECOVERY, DOWNLOAD MODE AND STILL NOTHING WORKS...
wondering what happened, or what i did wrong, what i can do to fix my phone (if possible)????
any of u wicked smart devs care to help out a little 'ol noob?? please
obviously its not bricked!
i hate that misnomer. you are bootlooping....
you need a jig at this point if normal means of getting into download mode do not work
(power down phone, pull battery. put battery back in, and while holding vol up+down, plug into computer.) if that doesnt put you in download mode, you definitely need a jig.
once you get that jig, flash a custom cwm kernel, then try flashing a new rom. you dont need to boot into stock, which is what you are stuck on now.
BY DEFINITION: A BRICK IS SOMETHING THAT NO LONGER POWERS ON, AT ALL
Damn beaten to the punch.
Sent From My Captivating Shanna, yes I Named My Phone get over it.
I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
whoisthisis said:
I rooted my droid 4 a few months ago when I first got it so I could tether. I removed a couple of programs using titanium backup (blockbuster app and some other bloat). Phone worked fine until monday when the touchscreen stopped working. I did a reboot (power + volume down) whereupon it just sat at the M "Dual Core" logo. I tried booting into the recovery menu but selecting "recovery" didn't do anything - it would just hang.
Last night I was able to get it working again by going into the recovery menu and selecting asp fastboot, then using RSDLite to push a stock Droid 4 ROM onto the phone. However, it didn't wipe my old system, and didnt install over it either because all my files were there, and the programs I removed were still gone. So the phone worked for a few hours then the touchscreen stopped working again.
I repeated the process with RSDLite and after a few failed attempts where the phone would hang while booting, I finally got it to boot into the OS again. And this is where I am at now.
I am pretty sure that the problem is related to the OS that is on the phone now and that I need to wipe the phone and start fresh with either a custom ROM or the stock D4 ROM. The problem is that I can't get recovery to do a factory reset. As I mentioned above, recovery just hangs and doesn't do anything. I am reasonably literate when it comes to this stuff but I get really confused because there are so many different ways that people seem to do this stuff (safestrap, bootstrap, CM( etc). I would love to try CM9 but my priority right now is just to have a phone that works. Any help would be greatly appreciated.
Thanks.
Click to expand...
Click to collapse
select recovery by holding the vol buttons and power on boot just like fastboot. press vol - for recovery. when u see dead droid hit both vol up and vol down and theres the recovery
Thanks, I was finally able to get into recovery. Wiped data and did a factory reset which again got stuck at the logo screen. Went back into fastboot and ran RSDlite again to flash the stock ROM which gets me to the "Welcome to Droid4" screen where it says "touch the android to start" but the touchscreen is unresponsive. Starting to think there is something physically wrong with the phone....
send it to motorola, I've heard their customer support is pretty good. but if you voided your warranty by rooting/flashing other roms, I've heard bricking the phone and sending it in works to get a new one too
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
whoisthisis said:
The only way I can send it back is through an insurance claim so I am trying to save myself $75j if this thing will just work. I just did a reboot and now the touchscreen seems to be working so I am going through the setup process....so weird.
Update: I was able to get the phone to load up and configured my google account etc. It appears that the phone is now running on completely stock installation of OS.....
Click to expand...
Click to collapse
So it has been a couple days now and the phone works totally fine. It looks like the problem was that by removing whatever bloatware that I did, the phone's OS got borked when VZW pushed an update of some kind. Flashing the stock ROM without doing a factory wipe would temporarily solve the problem but eventually the update would get pushed again and the whole thing would lock up again. The factory wipe + reinstall seems to have been the solution to the problem.
hi all
i ahve not installed a custom rom on my note, but i have rooted it and installed abyss note kernal. everything has been working fine for months and months with this, all of a sudden last night i saw my phone was off, i went to switch it back on and the boot screen just keeps looping and i have no idea why.
I can get into recovery (it says odin mode) and the phone is connected to odin on my PC.
i obviously would like to get the phone working again some how, but if at all possible i would like to keep everything that was on there as i was using the phone as a usb drive to store my college work on and dont want to lose it.
any help would be appreciated
Are you able now to start your phone???and if not, can you enter in download mode(pressing vol down+home key+power key)
Sent from my GT-N7000 using xda app-developers app
ok i just flashed a stock gingerbread rom from odin. odin said pass (successful) but i am still having boot loop i thought flashing a stock would have sorted it.
i did the flashing by accessing download mode and connecting to odin on my pc
please help i just want a working phone
htchd2rules said:
ok i just flashed a stock gingerbread rom from odin. odin said pass (successful) but i am still having boot loop i thought flashing a stock would have sorted it.
i did the flashing by accessing download mode and connecting to odin on my pc
please help i just want a working phone
Click to expand...
Click to collapse
hmmm so what your trying to say is that just right after reflashing to stock GB your phone went into a bootloop after? You didn't have any chance still of restoring your backups did you? it just rebooted right after flashing back to GB?
i didnt flash any rom before, i was just on stock what came on the phone. the boot loop randomly happened last night. i have just now flashed a stock GB rom through download mode and odin.
the boot loop is still happening even after i just flashed a stock rom
did you restored your backups back on your phone? if you did.. try not to.. just observe it for now.. all stock.. no datas at all, turn off your phone(in airplane mode) and see if your still getting the bootloops.... if your still getting it then I'm doubting you may have a corrupted data partition inside your phone.
Mate, if you're on stock GB (NOT STOCK ICS!!!!), then you can safely go into Recovery Mode and full wipe:
- Hold Power + Volume Up + Home button alllll the way until a weird recovery, safe-mode like menu appears
- Navigate using the Volume Keys to "Wipe Data/Factory Reset"
- Use Home button as ok and do that
- Navigate to "Reboot System"
And you're done and safe, no worries
i didnt restore any backups as i didnt have any baackups. i cant access the phone at all it just boot loops only. i think it is a corrupted data partition as i have flashed a stock rom and it still boot loops. i dont know how it happened though as i didnt do anything i just pulled it out my pocket and it was turned off, i tried to turn it back on and thats when i got the boot loop
htchd2rules said:
i didnt restore any backups as i didnt have any baackups. i cant access the phone at all it just boot loops only. i think it is a corrupted data partition as i have flashed a stock rom and it still boot loops. i dont know how it happened though as i didnt do anything i just pulled it out my pocket and it was turned off, i tried to turn it back on and thats when i got the boot loop
Click to expand...
Click to collapse
Make sure you hold on to the buttons for long, 30 seconds to 1 minute.
in my recovery i dont have any options it just says odin mode
i went into the proper recovery and did a wipe data factory reset, it worked!!!!!! thankyou!!!!!
htchd2rules said:
i went into the proper recovery and did a wipe data factory reset, it worked!!!!!! thankyou!!!!!
Click to expand...
Click to collapse
Most Welcome!
Just remember to press thanks!
One more thing... Please make sure you know about recovery and/or download mode, about CWM, stock and custom ROMs + kernels before flashing
It will turn the experience of customizing your Note into something really pleasurable, not a teeth-chattering experience Believe me, I know.
You can check out the stickies in every thread + you can check out some articles either here on XDA or "Android A-Z" that talk about CWM (Clockwork-Mod Recovery), Rooting and that sort of thing.
Best of luck to you!
Hey guys
Samsung Galaxy Mini 5570 is a pretty old device now and definitely not worth to talk about, but It's for my aunt and she said i HAVE to fix it otherwise she will kick my butt.
This is the whole story:
Phone was running a very low android version (it was 2.1 or something) that i could barely install apps on it (Just installed WhatsApp), I decided to upgrade it to a higher version so i could install other applications like Line and Telegram for her, so basically i had to flash CWM file first because it was required, I flashed it using this link:
http://www.droidthunder.com/root-install-clockworkmod-cwm-recovery-samsung-galaxy-minipop-gt-s5570/
They said flash the cwm file and factory reset your phone but i flashed the cwm file and rebooted my phone without factory reset, everything was working fine :good: but i decided to follow the instruction so i rebooted into the recovery mode and factory reseted my phone (by my phone i mean her phone, but i'm gonna say my phone instead) and guess what, it never booted up again. stuck on Samsung logo.
But i could go into the download and recovery mode, so basically i followed this instruction:
http://www.droidthunder.com/update-samsung-galaxy-minipop-gt-s5570-android-4-2-1-cyanogenmod-10-1/
which is from the same guy, I flashed it using recovery mode and flashed gapps too, everything went normal without any errors. So i rebooted my phone and ............
a black screen poped up, I was really worried because i couldn't boot my phone, nor could i go into the recovery or download mode. I don't know if i could or not but the only thing I'm getting right now is a black screen or a backlight.
The only thing that seems to be working is when i hold Power+Volume UP button, my laptop can detect my phone (as Samsung CDMA Technologies) but can not flash anything using Odin, it stucks on "setup connection" message. Nothing else is working, I tried:
Home+power+volume down
Home+power+volume down+volume up
Power+volume down
Power+home
etc
I also tried a hundred different ways like completely uninstalling the drivers (with or without kies) pulling battery out, try those key combination while battery is out and reinsert battery while holding them but nothing is working.
I found this article yesterday which is for unbricking the hard bricked phones, but ADB can not detect my phone:
http://www.engineerthink.com/blog/2015/11/how-to-unbrick-hard-bricked-android-phone/
Please help me guys, And do not suggest me to take it in Customer Service because i would if i could.
Thanks in advance