Related
guys I need help...
I got a galaxy note gt 7000 with LC1 kernel...brought it from finland and now using it in bangladesh.it worked fine but for some strange reason when I turned it on the samsung galaxy note gt 7000 logo appears but then the display turns black and the phone turns off...in other words it doesn't boot..
I have the android 2.6.X firmwire on it...(no costum rom)...It was rooted thoughI mean I had the stock firmware with the only difference that it was rooted with odin...
right now I can't get the phone to boot but I can get into recovery and odin mode though...
how can I fix this??I already tried searching the forum but I don't know where to start...I hope it isn't bricked...I tried every wipe data option in the recovery mode but it didn't help...
:crying:
Go to this thread and download the pre rooted 2.3.6 from (or non rooted 2.3.6 if you dont ant root)
Follow the guide and reflash everything properly step by step with PC Odin
http://forum.xda-developers.com/showthread.php?t=1424997
[STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.0.4
Sent from my Amazon Kindle Fire using Tapatalk 2
asf58967 said:
Go to this thread and download the pre rooted 2.3.6 from (or non rooted 2.3.6 if you dont ant root)
Follow the guide and reflash everything properly step by step with PC Odin
http://forum.xda-developers.com/showthread.php?t=1424997
[STOCK ROMS] N7000 All stock ROMs + install + Root guide All at 1place,Latest 4.0.4
Sent from my Amazon Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
thanks a LOT...I have some stupid question though...
it says "These all are stock ROMs and this can be flashed using PC odin without exclamation mark or raising flash counter. Read installation note at end of list"
my phone gives the exclamation mark when it turns on...does that mean that I can not install these roms??
and also I don't know which country is my phone from...I mean I don't know which exact firmware I should download...all I know is that I have the LC1 kernel, the phone was brought from finland and I am currently using it here in bangladesh...
I am so sorry is just that I don't know where to start and I am panicking right now...
No, it doesn't mean you can't flash them. It just means that if you flash them, they won't raise the flash counter and won't cause the yellow triangle to appear. You can flash them safely. If you still have the yellow triangle after flashing them then use TriangleAway to remove that triangle and reset the flash counter.
Sent from my GT-N7000 using xda app-developers app
joey_oggie said:
No, it doesn't mean you can't flash them. It just means that if you flash them, they won't raise the flash counter and won't cause the yellow triangle to appear. You can flash them safely. If you still have the yellow triangle after flashing them then use TriangleAway to remove that triangle and reset the flash counter.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
thanks again...it means a lot to me...the firmware I need is for the nordic countries... I need this one N7000XXLC1 N7000OXXLB3 NEE
THE BIGGG PROBLEM IS...that since I am from bangladesh downloading a file that is 550 mb takes at least 18 hours...and the file on this forum is uploaded on hotfile which stops the download after an hour and there is no resume support...
COULD anyone give torrent links or something I really need it...I am desperate...I am not able to download it from hotfile.com :crying: :crying: :crying: :crying: :crying: :crying: :crying: :crying:
PLEASE??:crying:
I am sorry for bugging like these I am panicking...
Wish I could help with something else... I don't know where else together them... private message dr.ketan he may know
Sent from my Amazon Kindle Fire using Tapatalk 2
asf58967 said:
Wish I could help with something else... I don't know where else together them... private message dr.ketan he may know
Sent from my Amazon Kindle Fire using Tapatalk 2
Click to expand...
Click to collapse
oki I'll try pm dr ketan...
Just remember you can use any country firmware
Sent from my Amazon Kindle Fire using Tapatalk 2
---------- Post added at 10:18 PM ---------- Previous post was at 10:13 PM ----------
You can also try custom rom that is a small download... then use Mobile Odin to flash stock with ever root after it dls
Sent from my Amazon Kindle Fire using Tapatalk 2
As asf58967 said, your best option is to message dr.ketan. He might be able to help you. I would have downloaded it myself and sent it to you directly but unfortunately I don't have ADSL at the moment, I'm using mobile internet.
There's another option though, you can try and download CyanogenMod9. It's only 150MBs.
Either way, good luck!
Sent from my GT-N7000 using xda app-developers app
asf58967 said:
Just remember you can use any country firmware
Sent from my Amazon Kindle Fire using Tapatalk 2
---------- Post added at 10:18 PM ---------- Previous post was at 10:13 PM ----------
YAs asf58967 said, your best option is to message dr.ketan. He might be able to help you. I would have downloaded it myself and sent it to you directly but unfortunately I don't have ADSL at the moment, I'm using mobile internet.
There's another option though, you can try and download CyanogenMod9. It's only 150MBs.
Either way, good luck!
Click to expand...
Click to collapse
really I can use any country's firmware??so what are actually the things I should look out for when downloading a rom??the kernel??I mean what are the precautions I should be aware of before downloading a rom??
how does the cyanogen mod9 works??the thing is I need to flash my note becouse it is stuck in the boot logo...then it turns off without booting properly...is there any risk I should take into account before flashing cyanogen mod9??
No, you won't need stock ROM if you are flashing a custom ROM. Just follow the instructions very carefully. Most important of all is to flash a safe kernel to wipe. NEVER wipe using stock ICS kernel as that will brick your phone (read about emmc bug).
Flashing CM9 works like any other ROM. You download the safe kernel and flash it using Odin PC then boot into recovery to wipe data and cache. Then copy the ROM zip file to your memory card or internal storage and flash it from recovery mode.
Sent from my GT-N7000 using xda app-developers app
---------- Post added at 11:56 PM ---------- Previous post was at 11:37 PM ----------
Also you might want to know that you will lose all Touchwiz applications when you flash CM9 like S Memo and S Pen. You can flash it until you get your hands on the stock ROM later so you can use your phone now.
Sent from my GT-N7000 using xda app-developers app
Yeah and when you get around to it use mobile odin to flash a stock rom
Sent from my GT-N7000 using Tapatalk 2
guys thanks a lot for the replies...
so here is the thing I can flash any rom i want into it right??
but I have to use a safe kernel...my question was can I use any a kernel that's different from the kernel that's on the phone?? (XXLC1)??
oki thanks a lot for the replies...I wil ltry the CMW mod9 way...I don't use s pen or s note anyway...I need the phone to work..
guys another question though...since my phone is stuck in the boot logo then it just turns black(the display of course)
won't this prevent me from flashing cm9 into it??I can still get into recovery mode and download mode...plus mine have a rooted gingerbread stock rom 2.3.6 that is apparently "soft bricked" or needs to be flashed...are there any other option such as cm9??I mean there are a lotta bugs in the CM9...maybe an older costum rom??should I get the safe kernel for cm9 before installing cm9??
thanks a again for all the help...
Nope. You don't need a working phone to flash ROMs and kernels. As long as recovery and download modes are working then you are fine.
Just boot into download mode and flash ANY safe kernel using Odin and then you can wipe data and flash any ROM you want from recovery.
For safe kernels, there are a couple of them. There's Notecore, speed mod and the one included with CM9 (might be speeemod, not sure). Check the forum you will find many of them.
I think you already have a safe kernel though. GB's stock kernel is safe as far as I know. But to be on the safe side, follow the instructions on CM9's site to the letter and you will have a working phone.
Sent from my GT-N7000 using xda app-developers app
joey_oggie said:
Nope. You don't need a working phone to flash ROMs and kernels. As long as recovery and download modes are working then you are fine.
Just boot into download mode and flash ANY safe kernel using Odin and then you can wipe data and flash any ROM you want from recovery.
For safe kernels, there are a couple of them. There's Notecore, speed mod and the one included with CM9 (might be speeemod, not sure). Check the forum you will find many of them.
I think you already have a safe kernel though. GB's stock kernel is safe as far as I know. But to be on the safe side, follow the instructions on CM9's site to the letter and you will have a working phone.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
THANKS A LOT!!!
are there any other costum rom of gingerbread that works without bugs and is like 150 mb like cm9??I mean I am not albe to download 550 mb at a time right now...
TANKS A LOT FOR THE REPLIES YOU GUYS ARE SAVING MY A*S...I love this forum I'm new but I love the help I am getting thanks much apreciated!!
SPEEDMOD AMD NOTECARE ARE NOT COMPATIBLE WITH CM9. if you have speedmod or notecore installed cm9 will NOT boot
you need a non touchwiz kernel
you can download the cm9 kernel from this link... Have the cm9 zip ready to flash on the sdcard and run it. It is safe to wipe without worry about hardbrick omce cm9 kernel is insyalled.
http://forum.xda-developers.com/showthread.php?t=1789397
**[JB][ICS][GB] Kernel Repository: New! HydraCore v1 and CM_9.1.0_Stable_Release
Sent from my GT-N7000 using Tapatalk 2
the "[GUIDE] Which Kernels are Safe/Unsafe to Wipe and Flash from" post says GB kernel is safe...I have GB kernel....but the thing is I want to install CriskeloRomNOTE. v7 and in the post it says
"CriskeloRom Note V7 No Wipe
LINK
CriskeloRomNOTE.v7-MD5-5F1906B96CA2380265104AC12D7EEF5C.zip
NOTE CriskeloRom V7
• Rom No Wipe (not erase your data)
• Kernel 4.1 AbyssNote
• Full support for BLN
• New and improved dialpad
• More wallpapers in the stock application
• Repaired, Select Wallpapers
• Jkay v13.5.1 + Spanish
• Improved response when an application
• More things that I remember and all of the previous version"
so basically it says kernel 4.1 abyssnote...does that mean that I have to install such kernel to flash this rom??
also what does "No wipe" means??that if I wipe data before flashing will it brick my phone??
I am sorry i these questions may seem stupid and very bugging I just don't want to take chances before flashing...thanks again for all the help though!!
Abyssnote is a GB based safe kernel. You cam flash that. Abyss is safe to wipe from and so is your stock gb kernel. Just do notwipe if you are on a 4.0 based kernel that is not a safe kernel. All kernels in the post i did above are safe. All gb kernels are safe to wipe in. It just says no wipe because it doesnt require one if going from certain other roms. You shoukd wipe if you choose that rom...
Flash it with pc odin with a wipe... So long as your not on ICS based kernel the wipe itsrlf should not brivk you..
Sent from my GT-N7000 using Tapatalk 2
asf58967 said:
Abyssnote is a GB based safe kernel. You cam flash that. Abyss is safe to wipe from and so is your stock gb kernel. Just do notwipe if you are on a 4.0 based kernel that is not a safe kernel. All kernels in the post i did above are safe. All gb kernels are safe to wipe in. It just says no wipe because it doesnt require one if going from certain other roms. You shoukd wipe if you choose that rom...
Flash it with pc odin with a wipe... So long as your not on ICS based kernel the wipe itsrlf should not brivk you..
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
thanks again for the help man...that should def do it..so I just do the data wipe/factory reset before flashing that rom though odin right??good!!
Hey Guys,
I have Galaxy note GT-N7000
android ver. : 4.0.3
I wanna know how could I update to jelly bean or at least ICS 4.4 if there is no official version of JB for Note yet,
I'm afraid that I heard that there is a problem with the Kernel or something like this in galaxy note that I can't update to newer version of andriod,
could you tell me please how to do this safely without any harm ?!!
Once you flash stock ROM for your area then you will be able to update with kies/OTA (once it released to your area)
But incase if you are on any other ROM there will be option to update with Odin.
stay tuned to XDA.
do you have a costum rom or are you planning to get a costum rom??
if that is the case you can use odin to flash a safe kernel and then flash an unofficial costum rom...search in the forum...
if you are on stock rom and you plan on staying on stock rom you will have to wait till it releases and you can download it once its released
the thing about the ICS being unsafe applies only if you're rooting or flashing a costum rom...other then that you should be fine as far as I know.
just out of curiosity why is everyone so eager to get on ics or jb??I am still on gingerbread and I don't exactly need to update...
dr.ketan said:
Once you flash stock ROM for your area then you will be able to update with kies/OTA (once it released to your area)
But incase if you are on any other ROM there will be option to update with Odin.
stay tuned to XDA.
Click to expand...
Click to collapse
Thank you
Wafi0101 said:
do you have a costum rom or are you planning to get a costum rom??
if that is the case you can use odin to flash a safe kernel and then flash an unofficial costum rom...search in the forum...
if you are on stock rom and you plan on staying on stock rom you will have to wait till it releases and you can download it once its released
the thing about the ICS being unsafe applies only if you're rooting or flashing a costum rom...other then that you should be fine as far as I know.
just out of curiosity why is everyone so eager to get on ics or jb??I am still on gingerbread and I don't exactly need to update...
Click to expand...
Click to collapse
how to get safe kernel ? and how to flash kernel and costum rom ? sorry I'm newbie :$
I rooted ICS 4.0.4 by a way I found it in XDA forum and it is rooted safely but without CWM
about why i'm eager to get ICS or JB is that some people told me that it is better for battery usage , I'm not sure !!
Easiest way is flash safe kernel (Hydracore/speedmod) with Mobile odin.
dr.ketan said:
Easiest way is flash safe kernel (Hydracore/speedmod) with Mobile odin.
Click to expand...
Click to collapse
could you please post a download link and the installation method ?!
-Download This
http://hecubus.com/xda/kernel/HydraCore/GL_NOTECORE_HYDRACORE_v1_STD.tar
and copy to SD card
-Open mobile odin
-select kernel
-point to file you copied as above said
-Flash
dr.ketan said:
-Download This
http://hecubus.com/xda/kernel/HydraCore/GL_NOTECORE_HYDRACORE_v1_STD.tar
and copy to SD card
-Open mobile odin
-select kernel
-point to file you copied as above said
-Flash
Click to expand...
Click to collapse
Thnx so much
but I wanna know , after I flash it , what should I do ? install new rom or it will be back again to GB or what ?! sorry that is my first time to flash anything !!
You will remain same on ICS 4.0.4 by flashing this. But this is safe kernel, you will be safe from emmc brick bug, as well you can use its CWM to backup/restore nandroid, as well you can flash custom ROM.
dr.ketan said:
You will remain same on ICS 4.0.4 by flashing this. But this is safe kernel, you will be safe from emmc brick bug, as well you can use its CWM to backup/restore nandroid, as well you can flash custom ROM.
Click to expand...
Click to collapse
thank you , can I get CWM for my phone ? because the root method I used it doesn't have CWM !!
I tried it twice , every time I select the file from mobile odin , it hangs and this message appears ( unfortunately mobile odin has stopped )
dr.ketan said:
-Download This
http://hecubus.com/xda/kernel/HydraCore/GL_NOTECORE_HYDRACORE_v1_STD.tar
and copy to SD card
-Open mobile odin
-select kernel
-point to file you copied as above said
-Flash
Click to expand...
Click to collapse
Unfortunately. mobile ODIN has stopped.
what should I do ?!
Check you have proper root.
Find root checker from market
Install latest mobile odin
Sent from my GT-N7000 using xda premium
dr.ketan said:
Check you have proper root.
Find root checker from market
Install latest mobile odin
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Root Checker says it is rooted , I downloaded Mobile Odin v3.25 , but the same happened !!
free or pro version?
Free version seek thread on xda and follow instal instructions.
Pro version check if you have granted root rights in super user app.
edit:made little clearer
Sent with a grin (^.^)
baz77 said:
free or pro version?
Free version seek thread on xda and follow instal instructions.
Pro version check if you have granted root rights in super user app.
edit:made little clearer
Sent with a grin (^.^)
Click to expand...
Click to collapse
Thank you , now it is successfully worked
dr.ketan said:
You will remain same on ICS 4.0.4 by flashing this. But this is safe kernel, you will be safe from emmc brick bug, as well you can use its CWM to backup/restore nandroid, as well you can flash custom ROM.
Click to expand...
Click to collapse
i installed got brickbug app ,and it says : Danger this eMMC chip os known to have the brick bug !! after flashing the kernel
does that mean i still can't flash custom roms , factory reset or wipe on stock ICS 4.0.3 ?
After flashing safe kernel, you can safely wipe or hard reset.
And yes flash custom rom too, but before flashing custom rom you have to read instruction from custim rom thread op.
Sent from my GT-N7000 using xda premium
dr.ketan said:
After flashing safe kernel, you can safely wipe or hard reset.
And yes flash custom rom too, but before flashing custom rom you have to read instruction from custim rom thread op.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
is it safe to download and install roms from rommanager (CWM) ?! the rom is cyanogenmod 9.1.0 !!!
so sorry I know that i'm annoying and bothering u , but I really want to make sure that my phone will not break down !!
Hello,
I am new to the XDAdevelopers forum and don't have much knowledge of rooting or installing customs roms to Android phones.
I currently own the Galaxy Note GT-N7000 and just looking around some videos I would love to have some customs rom installed on my phone, such as the new Jelly Bean roms that are out now.
I would love to know on how to root my Galaxy Note if there is a Noob Tutorial for rooting the galaxy note and maybe a Noob Tutorial on how to install Jelly Bean rom that is currently out (any suggestion on which rom would be great)
As I said I am a noob and don't have much knowledge on how to mod your android phones and any help would be greatly appreciated
FYI: Looked around the forums for the while, I couldn't find anything simple enough, I bet there is somewhere in the forum, not sure if I was looking correctly >.<
Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best
rajsekhar.300 said:
Here is a guide to root your phone
http://forum.xda-developers.com/showthread.php?t=1329360
After you root your phone,flash a safe kernel like hydracore or speedmod kernel and then flash any jb rom
Jellycore and paranoid android are two jb roms that i feel the best
Click to expand...
Click to collapse
Thanks for replying do you have any links to the Kernals and JB roms ? and if there is any tutorial for them too
Thanks again for your time.
Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921
rajsekhar.300 said:
Hydracore
forum.xda-developers.com/showthread.php?t=1749863
Jellycore rom
forum.xda-developers.com/showthread.php?t=1872921
Click to expand...
Click to collapse
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Georific said:
Does my version of Android Matter for these upgrades ?
I have
Android Version: 4.0.3
Baseband Version: N7000XXLPT
Click to expand...
Click to collapse
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.
jeetu1981 said:
No problem with your version, they works for all 4.0.X roms. here is complete guide for flashing.
Click to expand...
Click to collapse
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel
No.After you flash the kernel,you can install jb rom through cwm
Georific said:
Thank you so god damn much for the HELP! this is exactly what I needed one problem though it says I need MobileOdenPro :/ I really can't purchase apps of the market is that a problem ? for the Kernel
Click to expand...
Click to collapse
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?
Georific said:
Do I need any add any other roms to my phone before I put a Jelly Bean rom onto my phone ?
Click to expand...
Click to collapse
As long as you are on any safe kernel you can flash any JB rom, no matter if you are on any TW ICS, GB or CM9/10 roms. I am on CM10 right now and flashed it directly on stock LRQ ICS with Speedmod kernel.
jeetu1981 said:
There is a free version for people who cannot buy from market, look here or you can also use k-tools for flashing kernel its free on market, extract the kernel to zimage and put on root of internal SD and then flash it using k-tools.
Click to expand...
Click to collapse
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.
Georific said:
Mobile ODIN Lite says It requires an addon and takes me to the link you posted :/ ?
Click to expand...
Click to collapse
You can find those additional files in the same link
Scroll down few posts and you can find it
jeetu1981 said:
yes, it needs some files to be downloaded manually, mobile odin pro downloads them automatically. Why don't you use K-tools, its free and very easy to use. i flashed Speedmod last time using k-tools only.
Click to expand...
Click to collapse
I got it to work for Odin I added the Kernal Hydra do I just press Flash Firmware ? Please REply ASAP
rajsekhar.300 said:
You can find those additional files in the same link
Scroll down few posts and you can find it
Click to expand...
Click to collapse
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?
Georific said:
I managed to get Odin working I added the kernel Hydra do i just go to the bottom and click Flash Firmware ?
Click to expand...
Click to collapse
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all
bad or good...
jeetu1981 said:
Yes, select kernel (.tar or zimage format) in kernel field and then hit flash firmware. make sure to check if the kernel is flashed after restart before doing any wipes and all
Click to expand...
Click to collapse
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!
Georific said:
I followed every step on the link you gave me on how to get jellybeanitwas sucessful when installed it bootup but its been in the boot upscreen for a while it just says cyanogen mod. Like 20 min boot up or more is this bad.... help!!!!
Click to expand...
Click to collapse
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.
its works
jeetu1981 said:
boot in cwm recovery and do a full wipe, this should solve the problem or else reflash the JB rom.
Click to expand...
Click to collapse
The full wipe worked thanks so much man appreciate it for everything
Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
Hi everyone!
1st: Sorry for my english :silly:
2nd: I need help, i'm very very noob at Android, i recently bought a new Samsung Galaxy Note with ICS 4.0.4 Software Unbrand... The question is, i want to install 4.1.2 ITV (N7000ITVLS4.... ITALY) with odin and later i wanna instal a safe kernel but i don´t know which one... Philz or Hydracore? Which one is better? and which one will able me to unbrand my GN in the case of loosing the Software Unbrand?
3rd: How i install the kernel, i really don´t understand very well the procedure! I have fear about bricking mi new GN...
Thanks !
Click to expand...
Click to collapse
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
Edit: ops I just saw you're not Italian
Click to expand...
Click to collapse
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
ThaiDai said:
No, he's from Argentina. But recent events make this misunderstanding acceptable (sorry for OT, couldn't resist).
Click to expand...
Click to collapse
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Thanks
Bad-Pixel said:
Lol yes it's the same thing I thought about
Btw in that procedure, it may be safe, flashing the lsz rom directly without flash a safe kernel before, by odin ofc? Or we absolutely must flash a safe kernel before to flash anything by odin?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Thanks for the answer ! I just installed successfully the Italian version of JB !
PD: No, i'm from Buenos Aires, But i'm an Italian Citizen, i have double citizenship...
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
Nice dude
Glad it worked! If I can give you a personal advice:
Install speedmod kernel (actual is k5-1) using odin, download triangle away (actual should be 2.75.. Search it here on xda, by chainfire) install it and use it to remove the yellow alert triangle at the boot time (please read carefully how to use that apk). Now you got a safe kernel, root permissions and very good performance / stability. Ofc if you do that, you "temporarily" will lose the warranty (cuz of the root and the custom kernel). If you don't want, just keep your note as it is now
Regards!
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
I will keep that in mind... But i want to install CM10.1 in mi N7000, my cousin(he has a Galaxy S3 with Philz 4.88.5 and CM10.1) he recommended it to me... I really want the performance/interface given by CyanoGen Mod...
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
MarianoQT said:
What do you think? Will CM10.1 + Philz Recovery give me a remarkable efficiency that i'm looking for?
Will you recommend my Hydracore Kernel?
Click to expand...
Click to collapse
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Bad-Pixel said:
You can't use philz kernel (I'm talking about our galaxy note at least) on any other rom than a Touchwiz based. So unfortunately you can't use it on cm10.1 :/
When I used a cm based, usually I kept the original cm kernel, Btw some of new kernels on xda are interesting! So maybe just try them
For now I'm on ultimate rom, and I'm planning to switch to another one soon (I'm flasholic...)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Really? Maybe i read wrong ! But there is written that Philz 4.88.5 supports CM10.1 and GT-N7000...
Read This thread http://forum.xda-developers.com/showthread.php?t=2002953
Someone in http://www.Taringa.net recommended me to use Crash Rom with Philz kernel ! And not only one person did that !
What Do You Think? I'm very confused about Android(Kernel/Rom/Recovery)...
PD: I really miss my iPod Touch 4g ! iOS it's heaven for me hahahaha
R: [Q] GT-N7000 Stock ITV Jelly Bean, Philz Or Hydracore?
But dude, that topic is about the galaxy s3 (i9300) and talking about a custom recovery (with few words, the menu from where you install new roms or wipe your note) and not about a kernel. Plus, Dev Crash left our note community some months ago, and his last rom is a jb leak rom Samsung, so I don't recommend you to install it. It's too much old now. Btw, if you wanna some advice about all this story (kernel recovery and other maybe) I advice you to:
First search for some already opened thread, and if you will not any answer to your questions, open a new thread
Sent from my GT-N7000 using xda premium
Auch ! Sorry man ! I had a confusion !
But if you read the Thread there says that it's compatible with N7000... So, i can install Philz 4.88.5 Recovery on my Note !
Reading in the web i found a tutorial of the CM10.1 Official for N7000, i think i will use this ROM in my Note ! What do you think? Any advice?
In the page of CM i found the tutorial... I can't put the link here...
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
I'm think i will install... CM10.1 4.2.2(Nightly) ROM + Philz 4.88.5 Recovery ! Will this work?
Click to expand...
Click to collapse
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
nokiamodeln91 said:
Philz kernels only work with Samsung TW roms and no other roms. CM10 has its on kernel or other kernels based on them like DH
Click to expand...
Click to collapse
I said Philz Recovery... With CM10.1 ROM and Kernel !
which Philz recovery are you referring to ? Temp one?
nokiamodeln91 said:
which Philz recovery are you referring to ? Temp one?
Click to expand...
Click to collapse
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
MarianoQT said:
Philz 4.88.5 Touch CWM 6.0.3.0.... Why?
Click to expand...
Click to collapse
Dont you read? Phil touch recovery + stock kernel is only for touchwiz rom a.k.a stock rom. No cm9 no cm10 or cm10.1. If im not mistaken speedmod kernel is using phil recovery but no touch features it also for stock touchwiz rom. Correct if im wrong
Sent from my GT-N7000 using xda premium
struk in boot
Bad-Pixel said:
You should first install a hydracore kernel on your actual ics (but maybe it is no need), then flash the new jb rom lsz (the one you said) and after you can choose to flash or philz kernel (v 4.88.2) or speedmod kernel (k5-1). Both are goods! To flash all this, you just need a simple program called Odin
If you go in original android development section, you will find all that you need! Just read carefully the main threads, and all will go fine. There are also screenshots attached to the posts, so it will be more clear. Btw if you have some doubts, post here or pm me (sono italiano anche io )
Edit: ops I just saw you're not Italian
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
altanole said:
hi i just want your help pls answer me as soon as possible i installed official 4.1.2 official rom on my note. after that i want to root it and i install philz kernal from cwm. now the phone is not starting not going in recovery mode. only downloading mode. now i dont know waht to do install that rom again or install a kernal first.
Click to expand...
Click to collapse
Ok resolved
I installed philzkernal matching to my rom via Odin and now is all fine
Sent from my GT-N7000 using xda app-developers app
Hi
Just got my N7000 back from service; With just about all the hardware except the screen were replaced, it also returned running the stock ROM (Android 4.1.2, kernel version 3.0.31-1103517, build JZ054K.N7000XXLT5). While the stock Jelly Bean is miles ahead of both the original Gingerbread ROM and the stock ICS ROM, I'd rather root and go back to the CyanogenMod nightlies...
Thing is, between all the "Super Brick" and "eMMC" bugs - I'm a bit scared and terribly confused with witch technique I should use to root and ROM my phone. It sure would be nice if someone could point me to a tried and tested method (preferably a step by step guide) to root and ROM my N7000XXLT5...
Root using Philz kernel. Then you can flash the rom of you choice. For instructions, head over to his thread in the original android development section.
Sent from my GT-I9500 using xda premium
Thanks nokiamodeln91!
I assume you're referring to [PhilZ-cwm6][n7000]. I've looked at this earlier. I've settled on and are comfortable flashing it using the stock recovery method, and the step by step guide (in post #3 of the PhilZ-cwm6 thread) should make this manageable enough...
The problem however is that I'm unsure as to which package/version to download. I've looked at the "What kernel to choose section" in post #2 of the PhilZ-cwm6 thread, but from that information I cannot figure out which kernel matches/is suitable for my device...
As I said, I'm terribly confused by all this...
You need to choose Philz kernel XXLT5
Sent from my GT-I9500 using xda premium
nokiamodeln91 said:
You need to choose Philz kernel XXLT5
Click to expand...
Click to collapse
Thanks again! I've downloaded "PhilZ-cwm6-XXLT5-OXX-5.03.0-signed.zip" and are ready to root/rom my phone!
I guess it freaks me out not knowing/understanding everything. Especially about something as fundamental as the bootloader/OS of my phone. It's a weird feeling reading info like "DDLSC - DXLSE - JPLSB - XXLT5 - ZSLO2" without understanding most it. Also kind of freaks me out that I'm not supposed to use the latest version of a piece of software....
Though, I've had it with the stock rom again and are ready to take my chances! So again; Thank you!
@nokiamodeln91; Just wanted to say thank you!
Rooting with "Philz kernel" is quite possibly the easiest root I've performed. Once I were sure which version/variant to download is nothing to worry about.
So now I'm back to being a happy N7000 user running CyanogenMOD! Only difference being that I'm back to nightlies...
Again; Thanks!
vidvandre said:
It's a weird feeling reading info like "DDLSC - DXLSE - JPLSB - XXLT5 - ZSLO2" without understanding most it.
Click to expand...
Click to collapse
Those are world regions and release dates
Same problem
nokiamodeln91 said:
You need to choose Philz kernel XXLT5
Sent from my GT-I9500 using xda premium
Click to expand...
Click to collapse
Hi Guys, I have the same problem. I dont know which version to download. My droid is runing:
Kernel
3.0.31-1103517
But te Build Number is JZ054K.N7000XXLT9
I couldnt find the XXLT9 it only goes till XXLT6. Any suggestions pls?
Thanks in advace
Razgrizzz said:
Hi Guys, I have the same problem. I dont know which version to download. My droid is runing:
Kernel
3.0.31-1103517
But te Build Number is JZ054K.N7000XXLT9
I couldnt find the XXLT9 it only goes till XXLT6. Any suggestions pls?
Thanks in advace
Click to expand...
Click to collapse
Try to XXLTA version.
Found The XXLT9
nokiamodeln91 said:
Try to XXLTA version.
Click to expand...
Click to collapse
In the mean time I managed to find the XXLT9 but when I tried to install it it s giving me a Signature Verification Failed error. Any ideas?
Use XXLTA
User_99 said:
Use XXLTA
Click to expand...
Click to collapse
Ok Thanks will try that tonight
Thanks a lot for your help guys
User_99 said:
Use XXLTA
Click to expand...
Click to collapse
Hi guys I finaly had some time to try the XXLTA but stil giving me a Signature Verification Failed error!
I downloaded the xxla from here: d-h.st/users/philz_touch/?fld_id=25295#files
and do you know somthing about these files?
goo.im/devs/philz_touch/CWM_Advanced_Edition/n7000/
Thanks in advance
Use odin to flash the kernel. If you intend to root your rom, after flashing the kernel you will need to flash supersu from recovery.
nokiamodeln91 said:
Use odin to flash the kernel. If you intend to root your rom, after flashing the kernel you will need to flash supersu from recovery.
Click to expand...
Click to collapse
Thank you all Guys it worked