Hi there,
Yesterday I bought a Japanese HTC ONE (HTC J one, HTL22, M7-WLJ, Provider is AU-KDDI, it has a simcard).
As it was full of bloatware I S-offed using revolutionary (htcdev isnt allowed by AU) and flashed a recovery. Then I proceeded to flash Viper One. I asked in the thread if it would work and the answer was as long as it's not a dual sim device you should probably be fine.
So I flashed and ended up with a bootloop. No big deal as I backed up my original rom. I turned off my phone as it was pretty late already. When I turned my phone back on again it wouldn't boot into recovery anymore, it would just say entering recovery and then reboot. I tried reflashing the recovery again but it still just reboots when entering recovery.
So I asked in the TWRP thread what to do. "flash a RUU". Now the problem is that I can't a RUU.exe for this model.
Long story short, how do I get my phone working again? I assume I can't just flash a WWE asia version? From what I can gather the hardware still supports GSM networks.. so maybe it doesnt matter? I suppose if the hardware supports both networks it's just a matter of the correct settings/drivers being available in a rom?
sjaak1234 said:
Hi there,
Yesterday I bought a Japanese HTC ONE (HTC J one, HTL22, M7-WLJ, Provider is AU-KDDI, it has a simcard).
As it was full of bloatware I S-offed using revolutionary (htcdev isnt allowed by AU) and flashed a recovery. Then I proceeded to flash Viper One. I asked in the thread if it would work and the answer was as long as it's not a dual sim device you should probably be fine.
So I flashed and ended up with a bootloop. No big deal as I backed up my original rom. I turned off my phone as it was pretty late already. When I turned my phone back on again it wouldn't boot into recovery anymore, it would just say entering recovery and then reboot. I tried reflashing the recovery again but it still just reboots when entering recovery.
So I asked in the TWRP thread what to do. "flash a RUU". Now the problem is that I can't a RUU.exe for this model.
Long story short, how do I get my phone working again? I assume I can't just flash a WWE asia version? From what I can gather the hardware still supports GSM networks.. so maybe it doesnt matter? I suppose if the hardware supports both networks it's just a matter of the correct settings/drivers being available in a rom?
Click to expand...
Click to collapse
Look up hasoon2000 on bing and click the second link (should be a dev-host site)
Navigate to the One folder.
Download and extract the One all in one toolkit version 3.1
Put your phone in fastboot mode (Power and volume down button, should say "FASTBOOT USB" in red.
Try reflashing TWRP from toolkit to see if it works.
Related
Hi
It is possible to flash bootloader for Verizon HTC ONE that goes to standard HTC ONE ? - I will be using the phone in the EU.
After flashing TWRP m7vzw version and instal viper one I got message after system boot that simcard isnt from verizon. I skip that and choose wright carier and everything gooes fine for now.
klujek said:
Hi
It is possible to flash bootloader for Verizon HTC ONE that goes to standard HTC ONE ? - I will be using the phone in the EU.
After flashing TWRP m7vzw version and instal viper one I got message after system boot that simcard isnt from verizon. I skip that and choose wright carier and everything gooes fine for now.
Click to expand...
Click to collapse
it seem that this is not working for now. I flash TWRP 2.7.0.0 m7 version and system can't boot. Go back to the TWRP 2.7.0.8 m7vzw for now and waiting for updates.
klujek said:
Hi
It is possible to flash bootloader for Verizon HTC ONE that goes to standard HTC ONE ? - I will be using the phone in the EU.
After flashing TWRP m7vzw version and instal viper one I got message after system boot that simcard isnt from verizon. I skip that and choose wright carier and everything gooes fine for now.
Click to expand...
Click to collapse
You can't flash a bootloader that is not intended for your phone variant, you will brick it. But wait, you are talking about TWRP which is not the bootloader, its the recovery. You can't neither flash a recovery that is not intended for your phone variant!! Recovery and bootloader version have absolutely nothing to do with the message you got about your sim card.
klujek said:
it seem that this is not working for now. I flash TWRP 2.7.0.0 m7 version and system can't boot. Go back to the TWRP 2.7.0.8 m7vzw for now and waiting for updates.
Click to expand...
Click to collapse
Stop flashing things that are not intended for your M7VZW !!! You will end up messing your partitions. Go read the forums or ask here before doing thing you don't understand.
There also a specific forum for the Verizon Htc one here, you could probably find more precise information for your phone variant.
alray said:
You can't flash a bootloader that is not intended for your phone variant, you will brick it. But wait, you are talking about TWRP which is not the bootloader, its the recovery. You can't neither flash a recovery that is not intended for your phone variant!! Recovery and bootloader version have absolutely nothing to do with the message you got about your sim card.
Stop flashing things that are not intended for your M7VZW !!! You will end up messing your partitions. Go read the forums or ask here before doing thing you don't understand.
There also a specific forum for the Verizon Htc one here, you could probably find more precise information for your phone variant.
Click to expand...
Click to collapse
You are right, my mistake - I mean recovery flash
I was using HTC HD2 on several androids builds before so I get to use with partition mess
All I neet is to get rid of verizon from my toy. Do you think that flashing fimware, radio etc could help ? Something like described here for m7vzw phones http://forum.xda-developers.com/showthread.php?p=46506621 but for m7.
It is solved! For the answer look at my post below
Hello guys,
phone HTC one M8 Harman Kardon Edition
Happens that in my urge to unlock my phone sim lock I firstly changed the MID to unlocked SIM Dev edition MID and CID to SuperCID, well that went great until I was dumb enough to try to flash a Dev edition RUU to the phone and then i lost my TWRP recovery and everything went haywire. cause now i try to flash Recovery through fastboot and it suceeds but the phone gets stuck in entering recovery, Im not able to flash a Sprint RUU for HK because 1. i havent found one and 2. it probably wont load because of the MID which is 0P6B1200 if im correct.
please help me either load the Custom recovery so i can have access to adb, or any other way to fix it.
thank you!!
if someone could please give me any ideas, or contact anyone who could help me, it would be greatly apreciated, i can pay up to 20 usd through paypal if anyone can help me!!!
Change your MID back to Sprint and run the Sprint HK RUU...should be good to go.
Nevermind.. As long as you see hboot menu and capable to select different options you are safe and in healthy state.. Even if you want to brk things.. You won't be able to brk.. Just flash twrp 2.8 again using fastboot commands.. You should back on track...
thank you but no
Sarvesh.huddedar said:
Nevermind.. As long as you see hboot menu and capable to select different options you are safe and in healthy state.. Even if you want to brk things.. You won't be able to brk.. Just flash twrp 2.8 again using fastboot commands.. You should back on track...
Click to expand...
Click to collapse
I dont know what is going on but i did that already, even trying the new recovery image, and it gets stuck in the Entering Recovery... step
"Fastboot erase cache" and make sure you are flashing the correct version of twrp(change the MID back to the original one, this is dangerous if there is hardware difference across the 2 MIDs)
Guys all off your help was greatly apreciated but there was something wrong
Ok guys so I was able to fix it.
Although it looked like it was easy to flash the twrp recovery, remember I ran the ATT RUU so the hboot was wrong according to the phone. This means it wouldnt flash the recovery correctly, however something strange happened when i tryed to entered recovery after flashing, it would connect to the computer. When that happened the only thing i thought was that twrp has adb interface, so i instantly checked devices and proceeded to change back the MID. Once that was through i flashed Android 4.4.2 Sprint RUU non HK since the HK was giving unlock issues, then, pasted the Modded HtcOMADM_SPCS.apk and did the
Su am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity
Then clicked on sim lock
(You must be rooted and check for the moded file in the sim unlock thread on the general section)
And now i was fully funcional and GSM unlocked outside US.
I proceeded then by flashing HK lollipop RUU and then i was back on track.
Hey
jseb14 said:
Ok guys so I was able to fix it.
Although it looked like it was easy to flash the twrp recovery, remember I ran the ATT RUU so the hboot was wrong according to the phone. This means it wouldnt flash the recovery correctly, however something strange happened when i tryed to entered recovery after flashing, it would connect to the computer. When that happened the only thing i thought was that twrp has adb interface, so i instantly checked devices and proceeded to change back the MID. Once that was through i flashed Android 4.4.2 Sprint RUU non HK since the HK was giving unlock issues, then, pasted the Modded HtcOMADM_SPCS.apk and did the
Su am start com.redbend.vdmc/com.htc.omadm.test.TestMainActivity
Then clicked on sim lock
(You must be rooted and check for the moded file in the sim unlock thread on the general section)
And now i was fully funcional and GSM unlocked outside US.
I proceeded then by flashing HK lollipop RUU and then i was back on track.
Click to expand...
Click to collapse
Where do you type the "su ...." command into?
Hello,
I am new to xda forum and expecting a helping hand from fellow members, here's the scenario, I have a sprint htc one which was working fine a few days ago before i decided to act smart .
It was rooted when i purchased it so i thought of flashing a new custom rom into it.I tried flashing (HTC_One_-_MaximusHD_53.0.0) and this one (NuSenSeveN-LP-m7-Sprint_v4.02_050715) and ended up being stuck at green HTC logo, even though the physical buttons are performing their respective functions when pressed but the screen shows just the htc one logo and nothing else.
It is unlocked, tampered and s-on and i have twrp recovery on board, hboot 1.57.0000
WHAT I HAVE ALREADY TRIED AND FAILED:
1) tried rum runner to turn s-off because i though may b because of s-on the roms are not being flashed properly but it says adb device not found
2) tried flashing Bad_Boyz_Sprint_ONE_M7_Lollipop_v2.0 but stuck at handsfree activation, even though i deleted htcwizard.apk.
Now the bottom line is, I am unable to use my device and in desperate need of your help.
Please respond, awaiting to put my hand back on the device.
Thank You
Flashing MaximusHD_53.0.0 messed up your partitions (it's not Sprint compatible as far as I know) and NuSenSeveN you have to fastboot flash the kernel separately ( I had the same problem lol)
The easiest fix would be to run the latest RUU and start fresh, then only flash roms that are Sprint compatible.
Sloth said:
Flashing MaximusHD_53.0.0 messed up your partitions (it's not Sprint compatible as far as I know) and NuSenSeveN you have to fastboot flash the kernel separately ( I had the same problem lol)
The easiest fix would be to run the latest RUU and start fresh, then only flash roms that are Sprint compatible.
Click to expand...
Click to collapse
Hey thanks for the response, I am not tech geek so I have no idea how to flash the latest RUU can you please be more specific about how to perform the above mentioned process or can you have a chat on hangouts as I have altready added you on it.
Thanks alot
Try to flash ruu which could be found on other posts do u know how to boot into the bootloader?
problem solved
Update: thanks to @Sloth I have fixed the problem, if anyone out there who owns a sprint htc one and have messed up his phone by flashing an incompatible rom the way i did, first relock your bootloader if you are s-on and then simply download RUU file from htc official website, make sure its for sprint variant.
Once the bootloader is relocked simply run ruu.exe file that you have downloaded and you are done.
Note: if the ruu setup says that you phone is not connected or gets stuck, boot into recovery and perform factory, after that re-try running ruu.
Thanks Sloth, and thanks xda members
Brought a M7 off New Zealand trading site like ebay.
It came with a htc one soul xiaoxiang 8002_x21.0 rom, one i have been unable to find.
But i went ahead a threw the stock RUU at it and now no matter the rom's i flash my phone with im getting no signal, no sim card.
As far as i have played around its the radio, i recall that the xiaoxiang had a "radio" and "beats audio" app? but all the Sprint roms i have tried, about 10 havn't had the radio fix nor have any of them helped.
Feels like im going round and round in circles.
Can anyone suggest a rom or a fix?
I brought this model of phone because i wanted to abuse the infrared blaster and that was the driving factor i reverted to a stock ruu. But at this stage i just want to be able to use my New Zealand sim card!
Hello, what is your CID AND MID?
CID is 11111111
Device serial number is FA357S905147
Model is HTC PN072
Current have a badboyz rome Lollipop 5.0.2, Sense 6.0
Baseband is unknown
Imei unknown
Played around with different radio versions today, result was disappointing.
I'll run adb and try get the MID. i think thats where i get it.
I do have the HTC unlock file on my other computer.
hey bro i solved this problem by
(a)make a backup of the rom by twrp
(b)factery wipe the phone including OS i.e SYSYTEM
(C) Let it boot up till it gets stuck on the htc logo since it has no OS
(D)power off, go into boot loader and on fastbootusb type "Fastboot oem rebootRUU"
(E)THEN FLASH THIS RADIO "1.01.20.1225_6.16.651.2_radio"
(F)after youve flashed it reboot in to bootloader (Fastboot reboot-bootloader) and confirm if you have the radio
(last)restore your backup from twrp and enjoy
Awaisanwarkhan said:
hey bro i solved this problem by
(a)make a backup of the rom by twrp
(b)factery wipe the phone including OS i.e SYSYTEM
(C) Let it boot up till it gets stuck on the htc logo since it has no OS
(D)power off, go into boot loader and on fastbootusb type "Fastboot oem rebootRUU"
(E)THEN FLASH THIS RADIO "1.01.20.1225_6.16.651.2_radio"
(F)after youve flashed it reboot in to bootloader (Fastboot reboot-bootloader) and confirm if you have the radio
(last)restore your backup from twrp and enjoy
Click to expand...
Click to collapse
Hi my friends,
Can you give me download link of radio?
I have the same problem.
I flashed with ruu 1.29.651.10 stock rom,
Now phone is booting, main menü is coming but after 1 or 2 minutes it says' process system isn't responding.
Can you help me for this reason?
I Am having the same problem, i cant get compatible ruu for the device, pls i need help.
Sent from my iPhone using Tapatalk
I fixed it by flshing Radio.... Just flash compatible radio, and thats all.
Sent from my HTC One using Tapatalk
Still have this issue, upgraded to 7.1.1
As far as i know, its some sort of sprint lock.
The phone is GSM, but it doesnt matter if im running fireware from when the phone was first released or the lastest update, nothing solves the issue.
There has to be a file or script in the root files that has disabled this function.
SumguyNZ said:
Still have this issue, upgraded to 7.1.1
As far as i know, its some sort of sprint lock.
The phone is GSM, but it doesnt matter if im running fireware from when the phone was first released or the lastest update, nothing solves the issue.
There has to be a file or script in the root files that has disabled this function.
Click to expand...
Click to collapse
I suggest u find radio compatible with your device and flash it, it will solve your problem, thats what i did to mine after trying different option with no luck.
solace mukhtar said:
I suggest u find radio compatible with your device and flash it, it will solve your problem, thats what i did to mine after trying different option with no luck.
Click to expand...
Click to collapse
what radio am i looking for, one compatible with sprint, with andriod 7.1 or one based in NZL
https://forum.xda-developers.com/showthread.php?t=2419699
http://firmware-download-mobile.blogspot.co.nz/2015/07/htc-m7-all-all-carriers-m7-u-ul.html
So, I have several international HTC m7s (HTC 802w) at work and I'm trying to flash TWRP on these devices. All of them are at least S-off and some unlocked. This one particular device I'm trying to flash is both s-off and unlocked (but these weren't done by me). Interesting thing is, the twrp flashes normally in fastboot, but when I reboot into recovery, there is black screen only. If I attach usb in this state, computer detects MTP device and I can browse the phone contents and when I run adb devices, it says the device is in recovery. Does this mean twrp is flashed but can't correctly boot into it? What can I do to successfully boot into it?
My HBoot is 2.49 and CID is 11111111.
Edit: Another "interesting" bit. When I open back cover, it indeed says HTC 802w, but installed system is 802t.
asakurato said:
So, I have several international HTC m7s (HTC 802w) at work and I'm trying to flash TWRP on these devices. All of them are at least S-off and some unlocked. This one particular device I'm trying to flash is both s-off and unlocked (but these weren't done by me). Interesting thing is, the twrp flashes normally in fastboot, but when I reboot into recovery, there is black screen only. If I attach usb in this state, computer detects MTP device and I can browse the phone contents and when I run adb devices, it says the device is in recovery. Does this mean twrp is flashed but can't correctly boot into it? What can I do to successfully boot into it?
My HBoot is 2.49 and CID is 11111111.
Click to expand...
Click to collapse
Are you sure your twrp img is the one for the 802 model? Because the versions you'll find linked everywhere in this forum section is for the 801 model (the single sim variant).
The dual sim twrp versions are there:
https://twrp.me/htc/htconem7dualsim.html
Edit: Another "interesting" bit. When I open back cover, it indeed says HTC 802w, but installed system is 802t.
Click to expand...
Click to collapse
Someone probably converted this phone from w to t. You can dump the mfg partition to look at the original MID/CID if you really want to know what it was when it shipped from the factory.
alray said:
Are you sure your twrp img is the one for the 802 model? Because the versions you'll find linked everywhere in this forum section is for the 801 model (the single sim variant).
The dual sim twrp versions are there:
https://twrp.me/htc/htconem7dualsim.html
Someone probably converted this phone from w to t. You can dump the mfg partition to look at the original MID/CID if you really want to know what it was when it shipped from the factory.
Click to expand...
Click to collapse
Damn, so that's where I was messing up. I even read getvar multiple times, but somehow didn't pay attention that codename is cdtu. And no, I'm not interested what was shipped from factory, I just thought it had something to do with not being able to boot into twrp.
Another question then. What roms can I flash on cdtu? I have tried AICP from M7 forum, but it ended with error 7.
Edit: Can you tell me how to convert it back to 802w?