How to install latest GApps.zip on NativeSD ? - HD2 Android Themes and Apps

As in title.

BornToSowDeath said:
As in title.
Click to expand...
Click to collapse
I install like any zip. in recovery: choose the zip file to install. without rebooting install immediately after xboot.zip (x = is where you installed ROM native sd) for example, if the rom is sboot .... flash sboot.zip.

Related

[Q] root problem

hello
im currently using an android 4.0.3 XXLQ3 rom
my main objective is to install PARANOIDANDROID rom:
http://forum.xda-developers.com/showthread.php?t=2115167
in order to get root+safe kernel + cwm i used phiz recommended method described here:
http://forum.xda-developers.com/showthread.php?t=1901191
after i flashed it i rebooted the device i now have cwm but i do not have root or supersu app and i dont know if im on safe kernel or not
i read on the forum that lq3 room has some sort of a space problem as described here
http://forum.xda-developers.com/showthread.php?t=1329360
saying:
1B.If you want just Root but not kernel, follow this
- Download Root_SuperSu 0.95
-Copy downloaded file to Ext SD card.
-Reboot into recovery (vol up+Home+power)
-Select install zip from ext SD card
-select 'root_SuperSU-*.zip' which you have copied to Ext card above
-Reboot device
-You can see superSU on appl drawer. open it and update.
-Now This will give you only SuperSU not busybox, though application which doesn't depends on system busybox will still works.e.g.Titanium Backup.
-To get full Root+busybox, Download Root_busybox *.zip
-Copy Root_busybox* only to Ext SD card
-Reboot into recovery, Select Install zip from Ext SD card. select Root_busybox* .zip and Flash.
-Done !
PS : If you can't see superSU after flashing above file(sometimes happen if there is too low space like in LQ3 ROM, then use this Root_superSU, followed by same above Root_busybox file.
Click to expand...
Click to collapse
so my questions are:
1. how do i get root from my current state? can i use the root_supersu in cwm instead of stock recover?
2. how can i tell if my kernel is safe atm? phiz is suppose to be safe but maybe if root failed the mmc_cap remove failed too?
soory for the long post
thanks in advance to all the helpers!
what is the name of the kernel( with extension) you flashed and how did you flash it?
nokiamodeln91 said:
what is the name of the kernel( with extension) you flashed and how did you flash it?
Click to expand...
Click to collapse
i flased PhilZ-cwm6-XXLQ3-OXX-3.99-signed.zip
i flashed it using stock recovery as the post described
that is correct file.. if you have cwm then the kernel has been installed... try to flash the kernel again from cwm... then reboot and see for a supersu app..
nokiamodeln91 said:
that is correct file.. if you have cwm then the kernel has been installed... try to flash the kernel again from cwm... then reboot and see for a supersu app..
Click to expand...
Click to collapse
i flashed it again using cwm i didnt see any error
still no root or supersu app i even downloaded root checker app and it says im not rooted
Hmmm. Try with the supersu zip that you mentioned earlier.
Try installing supersu from market (play store) and look if it works
Sent from my GT-N7100 using xda premium
dr.ketan said:
Try installing supersu from market (play store) and look if it works
Sent from my GT-N7100 using xda premium
Click to expand...
Click to collapse
it didnt work installling from the market.
i used Root_SuperSu -freespace and now im rooted
the last question i have now is my kernel safe?
phiz kernel suppose to be safe does super_su somehow overwrite the mmc_cap erase?
If your recovery is philz cwm then you have safe kern l
Sent from my GT-N7100 using xda premium
Nope. It's safe. Kernel is what has the erase command disabled and supersu just installs supersu
Thanks for everyone's help managed to root and install
u can close thread.
Ok

Flashing Werewolf rom

Hi i just did wipe and formatted system. Now i got (status 7) error and installation aborted when installing rom from external sd_card. :crying:
What should i do now i noticed 6.0.2.8 ver cwm.
Hallako said:
Hi i just did wipe and formatted system. Now i got (status 7) error and installation aborted when installing rom from external sd_card. :crying:
What should i do now i noticed 6.0.2.8 ver cwm.
Click to expand...
Click to collapse
install cwm 6.0.3.1
How
Flying_Bear said:
install cwm 6.0.3.1
Click to expand...
Click to collapse
I tried searching how to install it but can i boot now?
Is there way to install it with older cwm ?
sorry i am little new with android devices.
and ofc i dont have backup
Hallako said:
I tried searching how to install it but can i boot now?
Is there way to install it with older cwm ?
sorry i am little new with android devices.
and ofc i dont have backup
Click to expand...
Click to collapse
install rom toolbox from google play store, install latest cwm from there, and then flash werewolf rom
but
Flying_Bear said:
install rom toolbox from google play store, install latest cwm from there, and then flash werewolf rom
Click to expand...
Click to collapse
But i cant boot now when formatted system
Re flash official 20a with kdz flasher then
Flying_Bear said:
Re flash official 20a with kdz flasher then
Click to expand...
Click to collapse
i am now trying but when i start update flasher crashes when extracting kdz.
log
oblem signature:
Problem Event Name: APPCRASH
Application Name: KDZ_FW_UPD.exe
Application Version: 1.0.4.4
Application Timestamp: 4ac2a689
Fault Module Name: KERNELBASE.dll
Fault Module Version: 6.1.7601.17514
Fault Module Timestamp: 4ce7bafa
Exception Code: e06d7363
Exception Offset: 0000b727
OS Version: 6.1.7601.2.1.0.256.4
Locale ID: 1035
Additional Information 1: 0a9e
Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
Additional Information 3: 0a9e
Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
><
You can do several things:
If your adb is working, i think you can push latest cwm to recovery partition. Find dexters topic on how to do it, but instead of 6.0.2.8, download latest from cwm website and push it.
Alternatively, download zaiben rom, put it on sdcard ext and flash it, then use rom manager etc.
Another thing you can do is search for topic "fixed cm flashable", and flash that cm, then update to latest.
There is one more way, you can edit cm's zip and delete lines checking for device id.
Good luck
Flying_Bear said:
><
You can do several things:
If your adb is working, i think you can push latest cwm to recovery partition. Find dexters topic on how to do it, but instead of 6.0.2.8, download latest from cwm website and push it.
Alternatively, download zaiben rom, put it on sdcard ext and flash it, then use rom manager etc.
Another thing you can do is search for topic "fixed cm flashable", and flash that cm, then update to latest.
There is one more way, you can edit cm's zip and delete lines checking for device id.
Good luck
Click to expand...
Click to collapse
Oh right ill try all i can.
Thanks for helping and that luck is needed.
i got it working after adb push latest cwm and then cm.

Cannot install gapp in [ROM][JB][4.2.2][JDQ39E] CyanogenMod 10.1

I writing in this thread, because I'm a new user, and haven't access to write in properly thread.
I have a problem with install gapp in
[ROM][JB][4.2.2][JDQ39E] CyanogenMod 10.1 by ADC Team - Release 5 - Kernel 3.4.x
Click to expand...
Click to collapse
rom on S9001.
Rom is install good, everything work, but I haven't google play. I try install gaps a few time, but it still doesn't work.
Mayby I do something wrong...
What I did:
wipe data/factory reset
wipe cache partition
apply update from sdcard -> select rom zip
apply update from sdcard -> select gapp zip
reboot system now
sami_10 said:
I writing in this thread, because I'm a new user, and haven't access to write in properly thread.
I have a problem with install gapp in rom on S9001.
Rom is install good, everything work, but I haven't google play. I try install gaps a few time, but it still doesn't work.
Mayby I do something wrong...
What I did:
wipe data/factory reset
wipe cache partition
apply update from sdcard -> select rom zip
apply update from sdcard -> select gapp zip
reboot system now
Click to expand...
Click to collapse
Which recovery have you got?
First, install TWRP or CWM .
TWRP 2,6 is the best, imho.
Then repeat the operations, you'll success
Dari78 by Tapatalk 2
remember THANKS button!
dari78 said:
Which recovery have you got?
First, install TWRP or CWM .
TWRP 2,6 is the best, imho.
Then repeat the operations, you'll success
Dari78 by Tapatalk 2
remember THANKS button!
Click to expand...
Click to collapse
TWRP 2.6 put on SDcard and install from reboot?
sami_10 said:
TWRP 2.6 put on SDcard and install from reboot?
Click to expand...
Click to collapse
Yes, on sd card, then reboot in recovery and apply update from sd card, then reboot again
Dari78 by Tapatalk 2
remember THANKS button!
Thanks a lot, it's work

How to correctly install Xposed Installer?

hello devs
i wanted to install xposed installer on htc one m7 . last tme when i did it I stuck in a bootloop and then i had to flash a new rom. so can any one help me to install xposed installer without getting into any trouble.
[*]Download and install this APK - http://loadbalancing.modaco.com/download.php?file=XposedInstaller_2.1.4.apk
[*]In the app do 'Install / Update'
[*]Download this zip file and copy to your internal SD card - http://loadbalancing.modaco.com/download.php?file=xposedinstall-2.1.4.zip (ROMraid)
[*]Install the downloaded zip from your custom recovery
That's it, you're done! To uninstall, use the 'Clean Up' option in the app and then run the uninstall zip from the main Xposed Framework app.
Enjoy!
masterleron said:
[*]Download and install this APK - http://loadbalancing.modaco.com/download.php?file=XposedInstaller_2.1.4.apk
[*]In the app do 'Install / Update'
[*]Download this zip file and copy to your internal SD card - http://loadbalancing.modaco.com/download.php?file=xposedinstall-2.1.4.zip (ROMraid)
[*]Install the downloaded zip from your custom recovery
That's it, you're done! To uninstall, use the 'Clean Up' option in the app and then run the uninstall zip from the main Xposed Framework app.
Enjoy!
Click to expand...
Click to collapse
again got into bootloop and I did all steps correctly
Which ROM are you currently on?
masterleron said:
Which ROM are you currently on?
Click to expand...
Click to collapse
viper 9.0.0
amir_khan007 said:
viper 9.0.0
Click to expand...
Click to collapse
and what framework version did you flashed? Viper 9 is android SDK 21 and the M7 is using an ARM cpu so you must use the sdk21-arm.zip version.
and btw @masterleron linked you an outdated installer (2.1.4). You need 3.0
Official and up-to-date xposed thread and files here. Remove everything you just installed, then install the 3.0-a4 xpsoed installer and then reboot in recovery and flash the xposed-v80-sdk21-arm.zip framework.
alray said:
and what framework version did you flashed? Viper 9 is android SDK 21 and the M7 is using an ARM cpu so you must use the sdk21-arm.zip version.
and btw @masterleron linked you an outdated installer (2.1.4). You need 3.0
Official and up-to-date xposed thread and files here. Remove everything you just installed, then install the 3.0-a4 xpsoed installer and then reboot in recovery and flash the xposed-v80-sdk21-arm.zip framework.
Click to expand...
Click to collapse
Are sure I wont get into a bootloop again
because i have now flashed the rom 3 times once due a "unfornately playStore has stopped" error.
Twice because of bootloops.
amir_khan007 said:
Are sure I wont get into a bootloop again
Click to expand...
Click to collapse
There are always some risks of softbrick/bootloop when modding your phone, its easily recoverable with a simple nandroid backup made before any modification. Learning to mod your phone = sometime making errors = need to reflash. This is the game you agreed to play when you first unlocked your bootloader. The only thing I'm sure is that you were not using the correct installer and possibly not the right framework (you didn't confirmed) and that using the right files should reduce the chances of bootloop

Updater process ended with ERROR: 1

Hello, help would be amazing as this is my 2nd day trying to root my xPeria XZ Premium!
I've finally flashed twrp , I'm trying to install this rom:
https://forum.xda-developers.com/xz-premium/development/kernel-sony-xz-premium-5-2018-t3784669
But I'm getting stuck when trying to install magisk, OR move any zip files from my SD card to my Internal Storage.
Could anyone guide me through how to resolve this? :crying:
Have unlocked boot loader?
Need to format data first
xStatiZx said:
Hello, help would be amazing as this is my 2nd day trying to root my xPeria XZ Premium!
I've finally flashed twrp , I'm trying to install this rom:
https://forum.xda-developers.com/xz-premium/development/kernel-sony-xz-premium-5-2018-t3784669
But I'm getting stuck when trying to install magisk, OR move any zip files from my SD card to my Internal Storage.
Could anyone guide me through how to resolve this? :crying:
Click to expand...
Click to collapse
Hey my dude follow these steps, in twrp select wipe->format data (You'll lose all your files) now try flash the rom, you should find a custom kernel for your device as well and install it after the rom. If the Kernel doesnt install magisk now would be a good time to do it :highfive:
Matthewwwww1998 said:
Hey my dude follow these steps, in twrp select wipe->format data (You'll lose all your files) now try flash the rom, you should find a custom kernel for your device as well and install it after the rom. If the Kernel doesnt install magisk now would be a good time to do it :highfive:
Click to expand...
Click to collapse
This isn't necessary. Just extract boot.img from whatever rom.zip you're using, flash that in recovery, reboot to recovery again and magisk should install.
murph187 said:
This isn't necessary. Just extract boot.img from whatever rom.zip you're using, flash that in recovery, reboot to recovery again and magisk should install.
Click to expand...
Click to collapse
You're a GOD. Thank You!!!!!
updater process ended with error: 1
I was able to install magisk but after that if i try to install nethunter I get this same error. I am using redmi 4(santoni). have installed lineage OS 15.1
Can someone please help me?
logs
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
i try and didnt work how to extract boot image in steps ??
magicstep said:
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
Click to expand...
Click to collapse
which version you use
murph187 said:
This isn't necessary. Just extract boot.img from whatever rom.zip you're using, flash that in recovery, reboot to recovery again and magisk should install.
Click to expand...
Click to collapse
Hi, which option may i have to choose? there are 4 options
magicstep said:
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
Click to expand...
Click to collapse
3.2.2 worked for me.
In my case unmounting all the partitions fixed it for me, the boot.img method didn't work.
magicstep said:
I had similar error shown below while installing a custom ROM:
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError )Updater process ended with ERROR: 1 Error installing zip file
Solved by using slightly older version of TWRP
Click to expand...
Click to collapse
I had flashed new version on firmware but forgot to update TWRP recovery that is why I was getting this error. I updated TWRP recovery. also flashed boot.img image then I was able to fix this issue.
guys please help me i have xiaomi mi a2 lite whit twrp 3.5.0_9 installed and unlocked bootloader i downloaded android 11 rom link: https://forum.xda-developers.com/t/rom-11-0-daisy-aosp-11-0.4167961/. When i go to recovery mode i flash the rom and appears this error: Updater process ended whit error: 1 to flash additional zips please reboot recovery to switch to the updated slots. Error installing zip file rom.zip. please help me.
THANKS
samyxy said:
guys please help me i have xiaomi mi a2 lite whit twrp 3.5.0_9 installed and unlocked bootloader i downloaded android 11 rom link: https://forum.xda-developers.com/t/rom-11-0-daisy-aosp-11-0.4167961/. When i go to recovery mode i flash the rom and appears this error: Updater process ended whit error: 1 to flash additional zips please reboot recovery to switch to the updated slots. Error installing zip file rom.zip. please help me.
THANKS
Click to expand...
Click to collapse
I was having the same issue... After hours of research I finely managed to fix it. Try the following:
1 - Install TWRP (I also had the 3.5.0_9 version).
2 - Format data and wipe all the advanced options possible.
3 - Download the program "payload_dumper-win64".
3.1 - Following the payload dumper instructions, I've copied the payload.bin from my custom ROM to the payload_input folder.
3.2 - Execute payload_dumper.exe and wait, a lot!
3.3 - Copy the resulted files (boot.img, system.img, vendor.img) in to the phone.
4 - In TWRP, go to install, select from images, and, one by one, install the images you've just copied.
4.1 - Note that during the install process, you will have to select the correct "slots" to flash the images. In my case, there where to options for system and vendor. I've chosen the "System Image" and "Vendor Image" option.
5 - Restart.
That's it! I didn't had to change slots nor wipe data after the installation... I don't know if this was the correct approach, but after many tries this is what worked for me
Sorry about my bad english...
Sometimes it is caused due to corrupted file. While transferring file through MTP it is likely to corrupt large files. I had the same problem. Then I tried copying file while in TWRP (sure it is also MTP) and it worked.
PendiukG said:
I was having the same issue... After hours of research I finely managed to fix it. Try the following:
1 - Install TWRP (I also had the 3.5.0_9 version).
2 - Format data and wipe all the advanced options possible.
3 - Download the program "payload_dumper-win64".
3.1 - Following the payload dumper instructions, I've copied the payload.bin from my custom ROM to the payload_input folder.
3.2 - Execute payload_dumper.exe and wait, a lot!
3.3 - Copy the resulted files (boot.img, system.img, vendor.img) in to the phone.
4 - In TWRP, go to install, select from images, and, one by one, install the images you've just copied.
4.1 - Note that during the install process, you will have to select the correct "slots" to flash the images. In my case, there where to options for system and vendor. I've chosen the "System Image" and "Vendor Image" option.
5 - Restart.
That's it! I didn't had to change slots nor wipe data after the installation... I don't know if this was the correct approach, but after many tries this is what worked for me
Sorry about my bad english...
Click to expand...
Click to collapse
It's legit procedure. Also you don't need to manage slots here, caz recovery automatically does that for you.
Hello guys, i'm from Russia, sorry for my bad English. I using Poco X3 Pro, and i have some troubles. I wanted to install custom firmware. First ROM
delivered successfully, unlike the second. After clearing all sections except sd cart and otg, I tried to install the original MIUI build, but it didn't work. I downloaded the original MIUI, but still. When installing, it says: "Update process ended with ERROR: 1" The methods from the top didn't help, please help!
Sushanthn94 said:
updater process ended with error: 1
I was able to install magisk but after that if i try to install nethunter I get this same error. I am using redmi 4(santoni). have installed lineage OS 15.1
Can someone please help me?
logs
Click to expand...
Click to collapse
Kali Nethunter on redmi 4x (santoni) is updated here:
Releases ยท Neternels/android_kernel_xiaomi_msm8937
Redmi 4X (santoni) NetHunter Kernel. Contribute to Neternels/android_kernel_xiaomi_msm8937 development by creating an account on GitHub.
github.com
Follow it and flash firmwares (if needed).

Categories

Resources