Galaxy TAB P1000.it was hard bricked.
Then i,unbricked it using Software Resurection method
http://forum.xda-developers.com/showthread.php?t=1312391
Then it was stuck at Samsung Boot animation.
After that i tried to reset it using Recovery it.But failed.
Error:
rfs format failed on /dev/block/stl10
Then i referred this thread to solve the above problem
http://forum.xda-developers.com/showthread.php?t=2425972
Then i tried to reset,it did not show any error.
It booted successfully after 10 mins but it showed much of Force close.
Because it did not reset completely.
Still there is old apps in the mobile.
Also,Each time when it restarted it showing System UIDs Inconsistent error.
I want to completely reset it.
Any solution?
Any help?
Any way to reset?
Adb not working! But download mode working...
Just restock with pit file.
One example is overcome method.
Follow my signature if you want.
Sent from my GT-N7100 using xda app-developers app
SC-01c galaxy tab logo freeze
Hi guys good day to all of you. I would just like to know if this post from one of our senior members here would also work on a japanese DOCOMO sc-01c P1000 tab? or anyone had already tried restoring on this kind of unit version?
Had tried using different pit files and stockroms from SAMFIRMWARE but still my unit freezes and blinks on the Galaxy Tab screen until later on all i see is the bricked logo so I used Heimdall to hoping to restore it back but no luck still on the freeze mode :crying: . Sorry guys but I am just new here in doing all of these stuffs that's why i just decided to post this question to ask for proper guide from those you had tried recovering P1000 DOCOMO.
Hope you can help me out and maybe share the right files and details. Thanks in advance guys.
Flashed the stock version with pit file.
Same problem.
In Stock recovery,Wiped the data and factory reset.
Problem did not resolved.
Then wiped it through cwm recovery.
Same problem.
Sent from my Q700 using xda app-developers app
Then it is a sign of internal NAND chip going bad.
Sent from my GT-P1000 using xda app-developers app
Related
Hello,
guys i need your help...one week ago my european unbranded tab suddlenty died after repartitioned with wrong pit and flash with jmk (only download mode and samsung logo) Now,i try the new gingerbread with bootloaders, odin done his job,now i have is coming into recovery but new things come up....
E:Error in/cache/recovery/sec_cscs.zip (status 7) Instalation aborded (this after odin finish and restart)...
I put in recovery and is coming E:cant open directory/system/app/ (no such file or directory) copy applications failed
wipe cache- E:format_volume:rfs format failed on/dev/block/stl11
cache wipe complete
wipe date- the same as above but /mncblkop2
/stl10
/stl11
Do you thing we can revive this device?
Sorry for my english and thank you for speding time to reading this
It looks like you have a signed bootloader.
I could revive my tab as followed:
Go to http://www.samfirmware.com/ download the JJ4 firmware, flash that firmware, including rom, modem & CSC with partition on.
Your Tab will probably come to life then.
Then you can upgrade from there on, if you like.
I hope this will work for you too.
have the same problem (P1000, neverlocked)
JJ4 is one i didnt try ... would have a look, hope it would work
tried until now
P1000XWJMI
P1000XWJMK
P1000XXJHA
P1000XXJI2
P1000XXJI4
P1000XXJK5
P1000XXJMA
P1000XXJME
but no one of these helped. Some only let me use the DL mode, others would reactivate the soft buttons, but no chance for get a Android boot :/
pong
dap,jj4 not working i mean odin succes but no bootloding or recovery
Frantech.
Just follow what rwa66 said, I had exacly the same issue and he helped me getting my tab up and running:
1- Download and flash JJ4
Your tab might be still stuck on the boot logo. Just turn it off, then go to download.
2 Flash GB 2.3.3 (following Chainfire instructions ) and your tab will boot normally.
Sent from my GT-P1000 using XDA Premium App
Pong0820,
JJ4 is a full ROM it should resolve the csc errors. Even if your tab doesn't boot or gets stuck on boot, flash again GB 2.3.3
Good luck
Sent from my GT-P1000 using XDA Premium App
doing now,thanks tupo05
frantech said:
doing now,thanks tupo05
Click to expand...
Click to collapse
Good luck. I hope your tab will be up and running again.
Sent from my GT-P1000 using XDA Premium App
incredible!!!!!!!!!! my tab is back!!!!!! with ginger,f..k!!!
the trick,i believe,is after odin is finish to flash ginger is to to put direcly in download mode (without loading) to flash adbdata.....thank you tupo5 and to all wonderful team
frantech said:
incredible!!!!!!!!!! my tab is back!!!!!! with ginger,f..k!!!
the trick,i believe,is after odin is finish to flash ginger is to to put direcly in download mode (without loading) to flash adbdata.....thank you tupo5 and to all wonderful team
Click to expand...
Click to collapse
Congrats man. Welcome back lol
Sent from my GT-P1000 using XDA Premium App
youre really incredible ... nothing else to add. feel squeezed and kissed
pong
Good to hear Pong. Enjoy your GB 2.3.3
Sent from my GT-P1000 using XDA Premium App
i have same error..
i have a samsung galaxy tab verizon cdma. sch-i800.
but in 99% stop in MOVINAND... not show error...
i have disconnect manualy. and show this error...
help me please !
man,really i dont know much about verizon,t-mobil,i have european tab...but about movinant failed because you use wrong pit with that rom you flash(maybe i am wrong but it happend to me)
I'm in a similar situation. Battery ran out during Odin process. Now it won't acknowledge the Tab when plugged in. I've put it on charge but still nothing. Is there any way I can solve this?
leave odin on,your tab conected and wait for odin to find yout tab(minutes,hours)
try first with wall charger few hours.....and then follow instructions on this topic or whatever you want to do
thanks frantech.
The issue is that my screen is completely blank. Can't get it even in to download mode. No combination of buttons does anything and connecting it to the computer doesn't even trigger that a usb device has been connected.
Is the only option to just leave it there with Odin?
IT IS WORKED!!! How AMAZING it is!!
OMG DUDE IT IS REALLY WORKED!!!
I got almost same bricked situation of my SGT!!!
Once i really think my GT have to send back to samsung...... but i have the last try of you guys' suggestion, IT IS WORKED!!!
IT IS SO AMAZING N UNBELIEVABLE!!!
Thanks alot dude!!! You save my SGT!!! n my pocket!!! Thanks~
Now my SGT has reborn from deadly bricked!!
Every1 got such problem can try this solution~
After i flashing gt over the odin with stock rom, gt rebooting and stay in samsung screen more then 15 min and nothing!!! Now i can go in downloading mode, but after that alwaise stay in sam.screen. What can i do? Sory on my english.
Please help!
No one has the right idea?
Your soft bricked go into download mode and flash the pit and pda(tar).
Sent from my GT-P1000 using XDA Premium App
I did it several times. Tab flashes successfully but still stuck at the end of the Samsung screen who keeps blinking.
dr.kis said:
I did it several times. Tab flashes successfully but still stuck at the end of the Samsung screen who keeps blinking.
Click to expand...
Click to collapse
flash again and wait.
I had to wait more than 15mins for the first boot ....then it came out and booted into the tablet.
I'll try it and now, but I waited over 20 minutes and nothing.
I think you should redownload and try the tar again. I'm sprint and have dne mine several times no issues.
dr.kis said:
I'll try it and now, but I waited over 20 minutes and nothing.
Click to expand...
Click to collapse
Sent from my SPH-D700 using XDA App
Maybe if you listed what you were trying to flash we could be of more help.. You could have a bad kernel flash, or just need to reboot back into recovery and do a data and cache wipe.. Theres a number of things..
Sent from my SPH-P100 using XDA App
You need to post -
1. What rom.
2. GSM or CDMA.
3. Steps done.
It also helps if you have a copy of your stock rom in case a restock is needed...
It P1000 is a GSM GT. I do not know what the firmware was in it at first but I did update via Kies 2.3.3 Then the stock is in tablet Backup blocked. Then I tried with almost all European firmware with samfirmware site and no I did not succeed. Odin sends me the message that the system is successfully upgraded, but at startup I get a message that is not mount E disk and then stuck in samsung blinked screen.
I do not have copy of my stock rom unfortunately.
That's about all I know about the problem.
Hi guys I need some help
I tried to update my Galaxy tab P-1000 from (GB)2.3.3 to aokp galaxytab build25 /rom build on cm9/ unfortunately rom stock on bootscreen.
So I entered again recovery mode (I'm using CWM) , preformed a complete wipe /without formatting sd/
After that, I tried to flash an other rom, suddenly recovery crashed weirdly, and I'm unable to access sd or doing anything else (unmount anything)
PC doesn't recognize my tab either on ODIN or even normally, I reinstalled Kies, and nothing happened......
So now I'm stock on bootscreen ie on a brocken recovery mode
Can anyone help me, Please
Thank you
Try Oneclick unbrick
http://forum.xda-developers.com/showthread.php?p=15330252#post15330252
Many have success with it.
Sent from my GT-P1000 using xda app-developers app
not working !!!!
priyana said:
Try Oneclick unbrick
http://forum.xda-developers.com/showthread.php?p=15330252#post15330252
Many have success with it.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
thx for your reply but it doesn't work
I open it and install java and everything looks great but doesnt work
please I need help what should I do ?
You tried to clear cache?
can't flash anything
newman_der1 said:
You tried to clear cache?
Click to expand...
Click to collapse
Thank you for replying
Yes I tried before clear cache, It keeps telling me "can't mount, can't open" shareimage.ro/images/6liogpq54h00zxufzn.jpg
Same thing happen when I try "unbrick" "make sure that your device is connected to pc"
When I try Odin it connect after 20-30 min but I can't flash anything "failed"
ps: previous owner did a very weird root after that, pc couldn't recognize tab,shows unknown usb inside device manger without any VendorID" or ProductID
btw I have Galaxy tab p1000 XXJID
I have a Samsung Galaxy Tab GT-P1000. Using Odin3 v3.04 I (accidently) flashed the Bootloader with the wrong binary. With the Auto-Reboot option selected on the Odin3, the device turned off and is not turning on again.
Before flashing, my Tab had the official Samsung GB 2.3.3 (P1000JPJPC if I am not mistaken).
Some threads suggest that I charge the Tab using the wall charger for 4 hours, and see if the battery icon appears on the screen or not, then connect the tab to the PC. I did that. I connected the Tab to the wall charger overnight. Nothing appeared on the screen. Then the next morning I connected the Tab to the PC, nothing happened. The PC does not recognize that there is anything connected on its USB port.
The Tab is not turning on. I've tried to press (and long press) almost every combination of the Tab's keys I could think of, but the Tab just won't turn on.
I guess I hardbricked my device (as explained in this thread)
I don't think I'll be able to apply the Unbrickable process explained here.
Having said that, my question is: Is there anything else I can do at home to revive my Tab, or do I need to send it to Samsung repair center?
-Adel
I think you brick it.
Flashing bad boot loader kills the tab.
Sent from my GT-I9300 using xda app-developers app
You can also send it to mobiletechvideos.com.
priyana said:
I think you brick it.
Flashing bad boot loader kills the tab.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
If you've completely killed your tab, what can be done to fix it. I have a similar problem with my tab in that it gets to the screen that says samsung galaxy tab and then stops there. I have been searching the net and have rooted the tab and then tried to flash firmware but i am struggling to get the tab to read the ext sd card with the firmware on it.I don't really know my way around this type f thing but have to figure it out because I can't afford to take it in to be repaired right now. Advise will be appreciated.
G
komplotter said:
If you've completely killed your tab, what can be done to fix it. I have a similar problem with my tab in that it gets to the screen that says samsung galaxy tab and then stops there. I have been searching the net and have rooted the tab and then tried to flash firmware but i am struggling to get the tab to read the ext sd card with the firmware on it.I don't really know my way around this type f thing but have to figure it out because I can't afford to take it in to be repaired right now. Advise will be appreciated.
G
Click to expand...
Click to collapse
Your problem is different from OP.
Can you boot to download mode? Can you boot to recovery, if so which recovery (stock or cwm).
Ave you tried Overcome method , as in my signature?
Sent from my GT-P1000 using xda app-developers app
priyana said:
Your problem is different from OP.
Can you boot to download mode? Can you boot to recovery, if so which recovery (stock or cwm).
Ave you tried Overcome method , as in my signature?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi Priyana,
Thanks for your reply. Yes, as far I could tell from reading up on it, I would guess mine is not bricked.
I can boot to download mode and to recovery - cwm (v3.0.0.5). I have tried downloading Overcome and anything else I thought might work but this is where I get stuck. I've wiped the cache and other things like that described on the net and on videos (actually this is what got me into this in the first place). When I copy a .zip file onto the external sd card and put it in the tab, I can't install the zip from the sd card because it can't find the directory I made. I'll have a look in your signature and see what I can find there but any guidance would be much appreciated.
Komplotter,
Yeah, I am not sure about cwm 3.0 accessing external SD.
Try using overcome restock, jump to page 7 PDF.
Flash stock, then overcome kernel.
That gives cwm 5.0
Sent from my GT-P1000 using xda app-developers app
priyana said:
Komplotter,
Yeah, I am not sure about cwm 3.0 accessing external SD.
Try using overcome restock, jump to page 7 PDF.
Flash stock, then overcome kernel.
That gives cwm 5.0
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I managed to get CWM 5.5.0.4 and get ICS installed in my tab by using two files (CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS and P1000XXJQ1_P1000XXJQ1_P1000XXJPZ). I would still like to use Overcome and I have had a brief look at the installation guide. I'll have a more thorough look and then give it a shot. I see that there is a version 4.1.0. Would I use that in that same way as the 4.0.0 ROM, because the Overcome7_ROMv4_Wipe file won't extract (there seems to be a problem with it and I've downloaded it twice).
You don't need the overcome ROM.
Just GB stock safe and overcome kernel.
Sent from my GT-P1000 using xda app-developers app
So as the title says I was playing a bit in recovery mode on my tab and i found an option : format /boot and i wanted to exit the section but i pressed the wrong button and now my tab is not booting anymore does anybody know how to fix this ? please help my dear tab
Try to reinstall the Rom. Data should be intact.
If you can't, but has backups, restore.
Lastly, restock to GB. And start over.
Use overcome method to restock. See my signature.
Sent from my GT-N7100 using xda app-developers app
the thing is i cant boot anymore nor boot into recovery so i will try to flash to GB and see what happens,also i am worried my PC wont recognize it but thanks for your suggestion