Related
Hey guys, I got my Nexus One earlier this week, and I love it so far, but I have some issues with my screen.
There seems to be a checkerboard kind of print on it. I can't really explain it any better than that. At first I thought it was maybe residue from the plastic wrapping it came in, but after a week and some thorough cleaning, it's still there.
It appears to be finger grease, which indicates that there's a problem with the glass. After cleaning it with a microfiber cloth, the pattern is gone (or at least extremely hard to see), but after some use, it becomes clearly visible again. To me, this says there's extremely small deviations in the glass, which finger grease gets stuck in where it isn't removed by a quick wipe down. To further support this theory, the screen seems more rough swiping top to bottom, than bottom to top, which would make sense given the pattern.
Edit: After thoroughly cleaning the screen, the breathing on it (like a window), my breath makes the pattern clearly visible. Though, this doesn't really confirm anything.
Has anyone else had or seen this issue? Any recommendations on fixing it, or should I be calling up HTC?
I'll try to take a picture when I get home from work, but I doubt it'll be visible. My only other camera is an iPhone.
I think what you see is the digitizer. It is barely visible but you can see it on every touchscreen phone
watercool said:
I think what you see is the digitizer. It is barely visible but you can see it on every touchscreen phone
Click to expand...
Click to collapse
Not to be one of those guys, but I never saw the digitizer on my iPhones, until I got my Nexus One. Had a moment of uh, my phone's screen is really going to be like that? until I realized what it was, and now I only notice it at an angle in bright light.
You are right, with you can see it I meant just in theory.
I saw it the first time on an n1 too, but only once or twice, but never saw it again since it is so barely visible
watercool said:
You are right, with you can see it I meant just in theory.
I saw it the first time on an n1 too, but only once or twice, but never saw it again since it is so barely visible
Click to expand...
Click to collapse
Yeah, I definitely knew what you meant. Just wanted to throw that out there.
It kind of sounds like your phone is suffering some form of Newton rings. In the phone world its when the front screen presses on the digitizer and creates light refraction, thus looking like oil swirls. My HTC fuze suffered this horribly and it gets worse over time as far as touch sensitivity goes. I would recommend calling HTC. My nexus doesn't have this issue at all.
I am wondering now if the shipping nexus ones have the LCD screens instead of amoled because of the shortage in amoled screens though.
Sent from my Nexus One using XDA App
I don't believe I'm seeing the digitizer. This is on the glass, not the display itself. It's visible on the bezel around the screen as well. I'll try to take a picture when I get home from work.
Edit: to be clear, it covers the entire front glass, over the display and the bezel, and is clearly visible even with the display on.
Strange issue. Never saw this when I purchased mine, though that's probably because I was excited to turn it on rather than inspect the body.
I think it probably has to with the adhesive material between the digitizer and the display not completely curing. When it does cure you don't see it very well but when you use the phone and it heats up the pattern comes back. At least that's my theory.
Sent from my Nexus One
Took some pictures. For the sake of size, I'll link them.
Full screen, off
Screen edge, off
Screen edge, on
These are pretty accurate, in terms of what daily usage is like. The full screen one might be a bit much, I had to hand print it up to get it to show in the picture, but the one with with the display on is pretty much what using it (indoors) is like.
I've seen that sometimes on my phone, but it's not nearly as often as it seems to be with yours. Not sure what that is then.
I had a problem with my screen that can only be described as similar. One of the replacement Nexus Ones I received had an incomplete oleophobic coating where the entire bottom 1/4th of the screen would be very clear and the top would get cloudy after light use. There were also a few circles just like the bottom of the phone on the upper portion as well.
I called HTC and they just replaced it for me. Sounds like you should do the same.
Whoa, those look like the glass was machined improperly or that the adhesive issue I hypothesized about earlier could be the culprit.
Contact HTC or Google at 1-888-48-NEXUS (63987).
hackm0d said:
Whoa, those look like the glass was machined improperly or that the adhesive issue I hypothesized about earlier could be the culprit.
Contact HTC or Google at 1-888-48-NEXUS (63987).
Click to expand...
Click to collapse
Thanks! Just got off the phone, they're going to replace it. Also, I can't believe how friendly/helpful they were. I'm extremely impressed.
j.bruha said:
I had a problem with my screen that can only be described as similar. One of the replacement Nexus Ones I received had an incomplete oleophobic coating where the entire bottom 1/4th of the screen would be very clear and the top would get cloudy after light use. There were also a few circles just like the bottom of the phone on the upper portion as well.
I called HTC and they just replaced it for me. Sounds like you should do the same.
Click to expand...
Click to collapse
Nexus One's do not have a oleophobic coating on the screen.
cbaltzer said:
Thanks! Just got off the phone, they're going to replace it. Also, I can't believe how friendly/helpful they were. I'm extremely impressed.
Click to expand...
Click to collapse
Same here, they're extremely nice.
I wanted to get a replacement battery since mine has short battery life and constantly overheats, so they forwarded me to HTC but unfortunately for some reason they didn't have my IMEI or S/N on their records, so I couldn't do anything.
I've had my optimus black for a few hours now and i'm really liking the screen!
I bought it after being slightly disappointed with the screen and speaker on my desire S (which I still have).
I'm a bit disappointed with the plastic feeling though, and i'm getting a "grip of death" problem with 3G when holding it with my left hand (it loses 2-3 bars compared to holding it in my right hand).
Also i've just noticed a build quality issue on mine, the grill that covers the earpiece has fallen down. I can lift it back up with a pin, but it quickly falls back down again. It looks like the glue didn't work. There is also a small imperfection in the glass right underneath the earpiece. Pic is attached.
Has anybody else had any issues with the cheap build quality?
chancooluk said:
I've had my optimus black for a few hours now and i'm really liking the screen!
I bought it after being slightly disappointed with the screen and speaker on my desire S (which I still have).
I'm a bit disappointed with the plastic feeling though, and i'm getting a "grip of death" problem with 3G when holding it with my left hand (it loses 2-3 bars compared to holding it in my right hand).
Also i've just noticed a build quality issue on mine, the grill that covers the earpiece has fallen down. I can lift it back up with a pin, but it quickly falls back down again. It looks like the glue didn't work. There is also a small imperfection in the glass right underneath the earpiece. Pic is attached.
Has anybody else had any issues with the cheap build quality?
Click to expand...
Click to collapse
I've had no real issues with the build quality.
I do hear a very light squeaking sound when I squeeze the right side of my phone, the plastic side of the back cover.
I'm also happy to know that the LG Optimus Black also has Gorilla Glass (discussed here and listed here).
You may want to return your phone for a replacement if the grill keeps coming off.
Ouch, now I'm chicken out to buy this phone.
Iphone4like antenna problem? Bad building quality? (with the known aspect ratio issue) Eeerrrrr, I think I'll choose another one.
chancooluk said:
I've had my optimus black for a few hours now and i'm really liking the screen!
I bought it after being slightly disappointed with the screen and speaker on my desire S (which I still have).
I'm a bit disappointed with the plastic feeling though, and i'm getting a "grip of death" problem with 3G when holding it with my left hand (it loses 2-3 bars compared to holding it in my right hand).
Also i've just noticed a build quality issue on mine, the grill that covers the earpiece has fallen down. I can lift it back up with a pin, but it quickly falls back down again. It looks like the glue didn't work. There is also a small imperfection in the glass right underneath the earpiece. Pic is attached.
Has anybody else had any issues with the cheap build quality?
Click to expand...
Click to collapse
I have no issues so far. I hold the phone with right hand i can't replicate the issue. I'm actually quite impressed with the durability considering the plastic nature of it.
so you think it's not a general issue, with the death grip?
This is my first Android phone so i have nothing else to compare to, but it seems i don't lose any signal holding it. But i do have smallish hands so it might be just that.
So don't take my word for it
So I bought an mEdge cover from Walmart and I also installed a clearcoat screen protector on the tablet just after receiving my tablet on Dec12. A week ago I started noticing a faint purple "shadowy, airbrushed" line in the middle of my screen when there's a bright white background on. At first I thought it had to do with the screen protector, but no matter how much I'd wipe the screen free of smudges I would still notice the airbrushed line.
I then suspected that it had to be the cover since the line matched up with the middle crease of the cover's flap and wondered if the magnets had anything to do with it. The magnets were located at the edge of the flap so that was ruled out.
I then searched online and came across a forum with a person having this problem on his phone, and he found out that it was due to pressure being applied to the screen from the case, and that he was notified that was a common problem with LCD screens. That pressure to the LCD would cause a permanent distortion and leave a "phantom" outline of where the pressure was being applied.
I'm so bummed now, because according to what I've read there is no fix for this, besides changing the screen or just getting a replacement.
It's not that bad right now, since you have to "look" for it but it's noticeable on a white screen and it bothers me. I love the cover and think it's one of the best for the Nexus 7 but I'm afraid it might make it worse. Does anyone else have this problem? and what kind of cover are you using? Finally, I know I've said it's permanent, but does anyone have a solution for this besides changing the screen or getting a new Nexus 7?
I've somehow managed to accumulate some dust behind the screen glass around the front-facing camera on my AHD. So far it doesn't seem to interfere with the camera, it's not blurry or anything, but I am wondering:
(1) Is there any way to get it out without disassembling the device?
(2) Any ideas to keep it from getting worse?
I have a Ballistic SG case and a screen protector on the phone, but neither of these covers (obviously) the earpiece speaker, which is where I think the dust got in because of it's proximity to the front-facing camera.
I read a lot of posts about similar issues with the Atrix 4G and Atrix 2, so it seems like a common enough issue. However, most of those posters indicated that they just sent the phone in and Motorola cleaned it under warranty. I don't have that option.
Thanks in advance!
Is anyone else's xz1 compact body bent or not straight?
I have had mind a couple of weeks and been super careful with it, so I don't think I bent it or something. I didn't notice until today when I set my phone down on a flat table as I was finicking with it when I noticed it rocked back and forth and wasn't perfectly flat to the table. It is particularly noticeable in the front side (I think part of this is due to the edges around the screen not being completely flush or evenly flat. The back does it much less, but I think that may because of the curved back on the back. After looking down the back side of the phone I realized it was clearly not straight and could see It curve.
Anyone with similar issues? Thanks!
The border around the camera lens is protuding a tiny bit from the back of the phone, to protect the lens from scratches.
The top and bottom edges of the phone are protruding to protect the screen from being scratched when placed face down.
Though it does not rock for me.
What sort of curve?
Mine doesn't rock when on its back, and I have a screen protector on the front which is slightly taller than the top and bottom metal caps, so it is also stable.
When I bought my phone in store, per procedure they had me inspect the phone for obvious damage or defects.
The first unit I got unfortunately had assembly issues with the top and bottom metal caps, there was a noticeable gap on both ends and they protruded unevenly. One end protruded to the front, and the other to the back.
At first they tried to play it off as non-issue, citing manufacturing tolerance, and refused to let me exchange a new one, but I insisted and eventually they agreed to give me another unit, which is the one I'm currently using.
Does your unit have similar unevenness with the metal caps? Maybe that's the cause of the instability. I do not perceive any curves on the body of my phone.
The border around the camera lens is protuding a tiny bit from the back of the phone, to protect the lens from scratches.
The top and bottom edges of the phone are protruding to protect the screen from being scratched when placed face down.
Though it does not rock for me.
Click to expand...
Click to collapse
I didn't think about the camera, good point, that may be some of the issue when it's on its back. The rocking when it's on its back is mild, so it may be the camera lens ring. However, I can look down the phone close with my naked eye and notice the bend pretty easily.
I do realize the front 'metal caps' protrude a little to protect the screen, but as mhaha says below, those edges are not necessarily uneven. The top metal cap sticks out further, in general, than the bottom. Individually, if I run my finger down the cap edges on the face of the phone I think I can feel where they get closer/further from the screen in places (it is very slight, so maybe that one is more in my head). I also didn't notice the uneven gap edge until you said that, I can't really physically feel that one so I think it's a little less of an issue. But, yes, on the left side of my screen it's super snug up against the side bezel and on the right I can see a very slight gap, in comparison.
My phone rocks bad on its face/front , diagonally from the cameras corner to the corner opposite.
I have actually requested my return (I ordered mine online) and will very likely be sending it back. I am not sure ill get a replacement either, for now just the return.
Thank you both very much!
mhaha said:
What sort of curve?
Mine doesn't rock when on its back, and I have a screen protector on the front which is slightly taller than the top and bottom metal caps, so it is also stable.
When I bought my phone in store, per procedure they had me inspect the phone for obvious damage or defects.
The first unit I got unfortunately had assembly issues with the top and bottom metal caps, there was a noticeable gap on both ends and they protruded unevenly. One end protruded to the front, and the other to the back.
At first they tried to play it off as non-issue, citing manufacturing tolerance, and refused to let me exchange a new one, but I insisted and eventually they agreed to give me another unit, which is the one I'm currently using.
Does your unit have similar unevenness with the metal caps? Maybe that's the cause of the instability. I do not perceive any curves on the body of my phone.
Click to expand...
Click to collapse
you may be having this issue?
https://sumahoinfo.com/xperia-xz1-compact-so-02k-docomo-fuguai-issue-body-twisted-distorted
It's in Japanese but the photo explains, I think.
yyiimm said:
you may be having this issue?
https://sumahoinfo.com/xperia-xz1-compact-so-02k-docomo-fuguai-issue-body-twisted-distorted
It's in Japanese but the photo explains, I think.
Click to expand...
Click to collapse
Yeah, my top metal cap isn't as in line as the bottom, now that I see that. Thanks very much! That would definitely contribute to a wobble on a flat surface.
But, there are still all the other issues I've noted, so I'm quite confident it's a number of issues contributing to it all.
Thanks!
yyiimm said:
you may be having this issue?
https://sumahoinfo.com/xperia-xz1-compact-so-02k-docomo-fuguai-issue-body-twisted-distorted
It's in Japanese but the photo explains, I think.
Click to expand...
Click to collapse
1230m said:
Yeah, my top metal cap isn't as in line as the bottom, now that I see that. Thanks very much! That would definitely contribute to a wobble on a flat surface.
But, there are still all the other issues I've noted, so I'm quite confident it's a number of issues contributing to it all.
Thanks!
Click to expand...
Click to collapse
The photo isn't quite a good descriptor of the problem though.
The photo suggests that it's just the way the metal end-caps are installed is what's causing the rocking.
If you run the link through a translator, the author states that the metal caps are misaligned because the plastic/glass-fiber body itself is warped.
So you may want to look at getting the phone replaced.
I dropped my phone on the road 2nd day of use. The metal edge got scratched, but the phone survived. The only other issue I noticed was twisted body. Looking from the edge, the twisted edge was easy to notice, and surface wobble was also there. I held the edges of the phone and put some pressure in opposite direction (trying to twist it back), and now my phone seems straight/aligned).
Please don't try this at home and come complain to me if something goes wrong. Since I dropped my phone, I couldn't just return it and get it replaced. Also not sure if the drop twisted it, or just pressure in my jeans pocket. Also not sure if the twist will come back. For now, the phone is fine.
I just bought XZ1 (not XZ1C) in UK, and having similar issue.
I'm not sure if the "cap" in misplaced or the whole body is twisted, but when I put the device face down, it rocks
pbarrette said:
The photo isn't quite a good descriptor of the problem though.
The photo suggests that it's just the way the metal end-caps are installed is what's causing the rocking.
If you run the link through a translator, the author states that the metal caps are misaligned because the plastic/glass-fiber body itself is warped.
So you may want to look at getting the phone replaced.
Click to expand...
Click to collapse
Thanks for the further insight, I'm grateful! I will be returning the phone. I'm undecided on whether or not I would like to purchase another after. I kinda wanted to see how the future quality/reviews are more. Based on some with similar issues, I'm not sure ill be getting another, but I'll see I guess. Thanks again!
I dropped my phone on the road 2nd day of use. The metal edge got scratched, but the phone survived. The only other issue I noticed was twisted body. Looking from the edge, the twisted edge was easy to notice, and surface wobble was also there.
Click to expand...
Click to collapse
Thanks very much for your input! I appreciate it. The body twist and warp (these are better way to describe it, thanks, as the phone isn't so much curved/bent as it, or the single piece back/body specifically, is warped) is quite noticeable with the one I have too (looking at the edge like you said). However, I don't think I've dropped the phone (too hard at least and no visible scrathes, scrapes, etc.) I also keep a phone in a coat pocket, bag, or just take it out and set it down when I'm not out and about, so I don't think I would have caused the warp myself. Thanks again!