Related
anyone knows what this means???????. I'm I lost my Tab for ever???????
this is the second download mode , you are alive don't worry
follow the guide in herre and you'll be up and running soon http://forum.xda-developers.com/showthread.php?t=1133590
Edit : i mean follow the link for your tab model , you'll find the link in the thread
k0sh said:
this is the second download mode , you are alive don't worry
follow the guide in herre and you'll be up and running soon http://forum.xda-developers.com/showthread.php?t=1133590
Edit : i mean follow the link for your tab model , you'll find the link in the thread
Click to expand...
Click to collapse
by the way. I just flashed the Honeycomb 3.0 but did not like it and attempt it to revert back to an original rom and that's when I ran in to trouble. I have full root but lost my clockworkmod recovery. how can I get it back and if you know any roms for Sprint Galaxy Tab?. thanks.
there is a link in thread i gave you above , check it
Would suggest to re-stock back to original firmware as this will fix up the internal storage...
I have this same issue after a failed firmware update, i was trying to update to 2.3 I have spent about 8 hours trying to fix this using the instructions and links etc on the link you supplied however im not 100% sure which of the several issues mentioned on the link is the one I actually have. Im not able to press the down and power key to get it into download mode. The screen in the picture only comes on when its plugged into the mains charger, i have once or twice got it to come on when plugged into the pc but not had any luck getting the firmware to update as i think the rom i had might have been corrupt or something. Do you know how to get the GT to let me update the firmware when its like this??
ok update, i left the GT plugged into the laptop until it came up with the screen in the picture, once this was displayed Odin picked up that the GT was plugged in i then used Odin to update the PIT and it started working again after that Hope this helps someone cause I spent all day looking for someone to say it was a simple to fix as this
ok..i bricked my black and i have a big problem. i was on CM7 latest nightly build and i manually tried to change the font using root explorer. and the cell went into bootloop after i rebooted.
now, i tried to use the unbricking using the R&DTT, but i have the following erroor. the attached image is what i get.
i, infact have the b2c client installed .
please helpppp, please, please...ANY help is appreciated!!!!
achyut said:
ok..i bricked my black and i have a big problem. i was on CM7 latest nightly build and i manually tried to change the font using root explorer. and the cell went into bootloop after i rebooted.
now, i tried to use the unbricking using the R&DTT, but i have the following erroor. the attached image is what i get.
i, infact have the b2c client installed .
please helpppp, please, please...ANY help is appreciated!!!!
Click to expand...
Click to collapse
Servers are down anyway so you can't use R&D with B2C. Do you have adb installed? Also, try entering recovery by pressing volume down then power button, you might get lucky.
gabwerkz said:
Servers are down anyway so you can't use R&D with B2C. Do you have adb installed? Also, try entering recovery by pressing volume down then power button, you might get lucky.
Click to expand...
Click to collapse
1. servers are down: AWESOME!!!
2. ADB installed: NO!!!
3. vol down+power: NO LUCK
NUTSHELL: AM *&&^%^&*
Hey, tomorrow is a Monday. Im figuring you are within your warranty. Instead of waiting for the servers, which are up, btw, all you need to do is step into the LG service center. They'll replace the handset in 2 days. I got mine replaced a week ago.
shreyas99 said:
Hey, tomorrow is a Monday. Im figuring you are within your warranty. Instead of waiting for the servers, which are up, btw, all you need to do is step into the LG service center. They'll replace the handset in 2 days. I got mine replaced a week ago.
Click to expand...
Click to collapse
i thot of that, but since the phone is bootlooping CM7 bootscreen, i feel they are going to void my warranty!!!....were u rooted and yet got your handset replaced???....reply man!!!....am so tensed!!!
Try this :
1. R&D Tool must be Run As Administrator
2. B2CC notiagent must run (on taskbar)
3. Change Phone Mode to DIAG
see also THIS GUIDE
can anyone post the EXACT STEP BY STEP 2 unbrick the phone??
even running LGUpdate -> recovery phone didn't help.
it downloaded the update, updated the phone, but the cell won't boot!!!...only thing that changed is that the bootanimation loop has changed from CM7 to stock LG one. dats about it!!!....please help me guys!!!!...am so so so so worried!!!!...feel liek i was better off with the x10
I did down-grade CM7 to Stock ROM V10D use R&D Tools without problem. I saw your R&D tool pic, I suggest to you :
1. Use R&D tool again (because R&D tool is full flash).
2. Re-download kdz file stock ROM HERE (maybe your kdz file is broken)
3. All of that Windows Software must be run as administrator.
4. Change PhoneMode : CS_Emergency to be DIAG (see image of R&D that you uploaded)
ps. : Sorry for my bad english
here is the problem with me.
1. I HAVE THE DRIVERS, MSXML 4.0 AND THE B2C TOOL INSTALLED
2. I DID EVERYTHING MENTIONED IN THE GUIDE ABOUT THE WINDOWS ENABLER AND EVERYTHING.
3. THEN WHEN I START THE R&D TT or he UpTestEX_mod2_marwin.exe, it runs. i select the downloaded .kdz file, (mode is set as CS_Emergency) and then when i hit run CSE WEB UPGRADE TEST, it shows me the 2nd window where i should hit "UPGRADE START" and it runs the updater, however, when i run it, it says
"please install B2C CSMG CLIENT TOOL
SELECT TOOL -> B2C Client Setup Menu
but when select it from tools it says "B2C Tool Setup Complete"!!!!!.....what 2 do.....PLESASEE HELP...HELPPPPP!!!!
@achyut What window$ version do you have?
redy2006 said:
@achyut What window$ version do you have?
Click to expand...
Click to collapse
i have Windows 7 Ultimate_x64 on my laptop...however,i have the WIN 7 (_x86) on my desktop.
SOLVEDdon't know if it was specific to my laptop,but when i tried it on my desktop, it worked!!!! btw, i don't have the PC Suite installed on my desktop,if it makes any difference.
I use x86 version, and don't have problem. Perhaps it is related with x64 system, I don't know for sure.. But, I'm glad you've solved it...
OK, got the Revos Feb.2, kept trying to do the OTA update. 4 hours on the phone with CS & Tech. An hour at the Verizon store. No luck whatsoever. Now, I would like to post here http://forum.xda-developers.com/showthread.php?t=1337386 but as I need 10 posts to post in Development, I am here.
We are stuck on 2.2.2 Froyo & would like to do the update to Gingerbread, then root (have that down pretty well).
Being as the Multiupload site is inaccessible, I searched & found the LGNPST 1.2 & installed all 5 parts. Already had Drivers installed in anticipation of rooting.
1.The .DLL file I found elsewhere has a .7z extension ( not 7Zip ).
2.My .tot file for V7 Gingerbread must be corrupt, as I cannot extract it at all. (Downloading through Revo Wifi)
Does anyone have better site to download these files?
I feel I would do fine, so long as I could get these files.
Thank you all for any assistance & for all of the work that you have done to help Newb Revo owners like me...
Ed
yankneck696 said:
OK, got the Revos Feb.2, kept trying to do the OTA update. 4 hours on the phone with CS & Tech. An hour at the Verizon store. No luck whatsoever. Now, I would like to post here http://forum.xda-developers.com/showthread.php?t=1337386 but as I need 10 posts to post in Development, I am here.
We are stuck on 2.2.2 Froyo & would like to do the update to Gingerbread, then root (have that down pretty well).
Being as the Multiupload site is inaccessible, I searched & found the LGNPST 1.2 & installed all 5 parts. Already had Drivers installed in anticipation of rooting.
1.The .DLL file I found elsewhere has a .7z extension ( not 7Zip ).
2.My .tot file for V7 Gingerbread must be corrupt, as I cannot extract it at all. (Downloading through Revo Wifi)
Does anyone have better site to download these files?
I feel I would do fine, so long as I could get these files.
Thank you all for any assistance & for all of the work that you have done to help Newb Revo owners like me...
Ed
Click to expand...
Click to collapse
I reposted all this stuff in the Development forum after Megaupload got shut down.
http://forum.xda-developers.com/showthread.php?t=1466655
I thank you tremendously !!! I think I remember seeing that before, but in my frenzy of 2 days of sheer frustration, I missed the note about not working on Firefox (which I obviously use). Thankyou Sooooo much & I'll let ya know how I do in the morning.
Ed
Not a problem! There's actually a work around that was found for Firefox (thanks to Cybie). Just right click on the link, then click "save as." That should get the download going.
Sent from my Volted Ice Revo using Tapatalk.
I did it the right click way... Funny, I have seen pages come up like that & never knew why.
Now, when you uploaded it, was the file zipped? In the instruction post, it tells you to extract the file & I cannot seem to. When I compare the bytes, all looks fine. I downloaded it 2 times, just for insurance. Boy was it faster through you, than the fileshare site !!!
Again, thank you soooooo much !!!
Ed
You don't extract the tot file you leave it alone you just need to extract the lgnspt program and install everything then you make that folder to put the dll in and register the dll then follow the instructions throughout the process.
Sent from my VS910 4G using xda premium
OK, On a Toshiba junker laptop with Pent 3 2.6 Ghz, 1 gig RAM & Win 7 32 bit I ran everything fine with 1 cavet, I had to use Randymandy's DLL install procedure listed here:
If you're having trouble getting the vs910.dll to install and keep getting the "Windows7 RegSvr32 Error 0x80020009" message then try this:
Start (Win Key) > type uac > ENTER
Pull slider down to Never notify > OK
Restart computer
try installing vs910.dll again
just make sure you go back and put the slider where it was after you are done upgrading the software on your phone. This worked for me and I'm running windows 7 64bit.
16 minutes & 43 seconds, I am GINGERBREADED !!!
I want to put out thanks to the information I got here personally:
Jackpot
Spc_hicks09
Randymandy
Beamer9408
Thanks, folks !!! I can now Root & Gingervolt !!!!!!
Mods, feel free to move this to the origional GB post if you feel it would do better there.
Again, THANKS !!!!!!!!!
Ed
Rooted in 2 minutes with the Root in Development !!! WOO HO !!!!
Ginvervolt, here I come !!!!
All apps ( including free) are still there, along with contacts !!!
Ed
Well, been trying to get a tethering app to work right. After rooting, even the Verizon hotspot would not work. Tried Barnacle, Wifi tether & Open garden. Tried all the different settings & had it working for about 10 minutes.
Soooo I said what the heck, Gingervolted it & BOY is it fast. Still having issues with hotspots, but got Wifi tether v9 to work right now.... We'll see if it still works after a reset... Let's hope.
Does anyone have a stable hotspot app & settings they know of?
Again, thanks to all...
Ed
Well, I guess I'll just keep trying older versions of Wifi tether... v9 would not work after a reset.....
Ed
OK, got it all working after alot of studying... The problem I was having for an internet connection was the MTU settings of my wifi card in Winduhhz 7. Not sure what it's all about, but it is fully stable. Check out this site for checking & adjustment procedure. I ended up with a final setting of 1428 http://www.richard-slater.co.uk/archives/2009/10/23/change-your-mtu-under-vista-or-windows-7/
So, now the quest is to customize the phone the way I want it...
Ed
Great to see I am still helping people lol
Sent from my ADR6425LVW using Tapatalk
Well, after a TON of work, and unsuccessful attempts at getting this, I finally was able to get signal and working data on my phone. I know some people had had trouble with the process, so I'm going to post my guide here to help you all out.
There are two parts to this tutorial. Only one is needed, however, to get ICS to properly work, so find the one that fits your current predicament AND ONLY USE THAT PART OF THE TUTORIAL.
If this is your first time installing the ICS rom...
Follow the LG flashing tool guide that XBSall has linked in his ICS Rom post. You can also find it at http://forum.xda-developers.com/showthread.php?t=1244490 . However, when you install the ROM, DO NOT USE THE .FLS FILE HE PROVIDES. Instead, download the v18A baseband and install that one with the .BIN file he provides. You can find the v18A baseband here- http://forum.xda-developers.com/showthread.php?t=1338383 I believe. After you flash the entire thing, you should have ICS! Easy!
If you have the ICS Rom installed now, but have no signal...
This is a bit more complicated, but still very easy. After I flashed ICS, I was not able to flash things using LGFlashTool like I could in GB. This is how I ended up flashing the baseband to fix my issues.
We need to set up your phone to connect with LGFlashTool first. To do this, use XBSall's restore to GB method, located at http://forum.xda-developers.com/showthread.php?t=1942836 . You will need the OMAP4BOOT files, but you will need nothing else.
Follow his tutorial up until step 6. When he tells you to insert the battery, insert it AS FAST as you can. I messed up on the timing the first few times. Once I saw a greyscale LG logo, and a few other times it just booted normally. Just try again if this happens. Eventually you will get the screenshot in step 9. DO NOT remove the cable when OMAP4BOOT tells you to, as well.
Follow step 10 and 11 of XBSalls restore tutorial, and then follow step 12. When you set up LGFlashTool for the reflashing, simply select the v18A baseband to flash and then start the process. If done correctly, Port 1 should state READY. Repeat steps 3-9 in his tutorial. It will start the flashing process. Once you get an error, close the program, and remove your phones battery and disconnect it from your computer.
Turn on your phone, and receive signal. PROFIT.
Hope this helps you guys out a bit, and remember to hit thanks if this helped you.
you beat me to it lol I was just about to post steps just like this
Sent from my LG-SU760 using xda premium
still no signal... ill try again... atleast closer to fixing... attached is the error im getting... when i go into About and check the baseband it still has V30
EDIT: When into System Settings > About Phone > Software Information ... it is showing the following information.
Baseband Version: XMM6260
Software Version: LGSU760-V30b-OCT-18-2012
Can anyone help? The guide dosent show you how to install the OMAP4430 drivers, but i found out myself how to do it so whatever. Problem is, now "OMAP4430 USB Device" is dissappearing and reappearing over and over again when i boot with volume up. Can anyone shed some light as to how to fix this?
And my phone isnt bricked, i can turn it on right now and everything.
EDIT: Found the problem, you need to hold VolUp after OMAP4430 pops up. Funny, it says in the guide to let go when it pops up. Fixed my mistake though.
llsektorll said:
still no signal... ill try again... atleast closer to fixing... attached is the error im getting... when i go into About and check the baseband it still has V30
EDIT: When into System Settings > About Phone > Software Information ... it is showing the following information.
Baseband Version: XMM6260
Software Version: LGSU760-V30b-OCT-18-2012
Click to expand...
Click to collapse
I have the same thing on my phone. Maybe try to reflash the v18A baseband again?
u can use V20A or V21B basebands also they work too
Sent from my LG-SU760 using xda app-developers app
llsektorll said:
still no signal... ill try again... atleast closer to fixing... attached is the error im getting... when i go into About and check the baseband it still has V30
EDIT: When into System Settings > About Phone > Software Information ... it is showing the following information.
Baseband Version: XMM6260
Software Version: LGSU760-V30b-OCT-18-2012
Click to expand...
Click to collapse
OH MY GOSH. NOW THAT I HAVE ACCESS TO YOUR SCREENSHOT, I NOTICED YOU HAVE THE THING THAT HAD ME STUMPED FOR HOURS.
Follow the second part of my tutorial to the T. If it still doesn't work, maybe I'll make a video or we can go on Teamviewer and I'll try to help you out.
BG64 said:
OH MY GOSH. NOW THAT I HAVE ACCESS TO YOUR SCREENSHOT, I NOTICED YOU HAVE THE THING THAT HAD ME STUMPED FOR HOURS.
Follow the second part of my tutorial to the T. If it still doesn't work, maybe I'll make a video or we can go on Teamviewer and I'll try to help you out.
Click to expand...
Click to collapse
I tried everything to detail and it doens't work. PM me when you are available to teamview. I will be here till 1am -6GMT (CST)
PM me when you are ready to go I'll be here.
not able to keep OMAP 44xx device connected
Hello everyone,
I'm currently trying to get ICS installer on my rogers P925. I tried many times on two computers (both windows 7 one is 32bits other is 62bits) to flash the bin and fls files you are recommanding but it seems like even if my OMAP 4430 device driver is correctly installed via the program files texas instuments dll it seems it wont stay connected at all and just pop open and closed sometimes when it seems to want, and it makes the flashing procedure impossible to me any ideas?
b.charles.gagne said:
Hello everyone,
I'm currently trying to get ICS installer on my rogers P925. I tried many times on two computers (both windows 7 one is 32bits other is 62bits) to flash the bin and fls files you are recommanding but it seems like even if my OMAP 4430 device driver is correctly installed via the program files texas instuments dll it seems it wont stay connected at all and just pop open and closed sometimes when it seems to want, and it makes the flashing procedure impossible to me any ideas?
Click to expand...
Click to collapse
Although mine hasn't worked in flashing properly I might be ables to get your drivers to connect properly so that LGflasher starts flashing. PM me your teamviewer ID and PW
BG64 said:
Well, after a TON of work, and unsuccessful attempts at getting this, I finally was able to get signal and working data on my phone. I know some people had had trouble with the process, so I'm going to post my guide here to help you all out.
There are two parts to this tutorial. Only one is needed, however, to get ICS to properly work, so find the one that fits your current predicament AND ONLY USE THAT PART OF THE TUTORIAL.
If this is your first time installing the ICS rom...
Follow the LG flashing tool guide that XBSall has linked in his ICS Rom post. You can also find it at http://forum.xda-developers.com/showthread.php?t=1244490 . However, when you install the ROM, DO NOT USE THE .FLS FILE HE PROVIDES. Instead, download the v18A baseband and install that one with the .BIN file he provides. You can find the v18A baseband here- http://forum.xda-developers.com/showthread.php?t=1338383 I believe. After you flash the entire thing, you should have ICS! Easy!
If you have the ICS Rom installed now, but have no signal...
This is a bit more complicated, but still very easy. After I flashed ICS, I was not able to flash things using LGFlashTool like I could in GB. This is how I ended up flashing the baseband to fix my issues.
We need to set up your phone to connect with LGFlashTool first. To do this, use XBSall's restore to GB method, located at http://forum.xda-developers.com/showthread.php?t=1942836 . You will need the OMAP4BOOT files, but you will need nothing else.
Follow his tutorial up until step 6. When he tells you to insert the battery, insert it AS FAST as you can. I messed up on the timing the first few times. Once I saw a greyscale LG logo, and a few other times it just booted normally. Just try again if this happens. Eventually you will get the screenshot in step 9. DO NOT remove the cable when OMAP4BOOT tells you to, as well.
Follow step 10 and 11 of XBSalls restore tutorial, and then follow step 12. When you set up LGFlashTool for the reflashing, simply select the v18A baseband to flash and then start the process. If done correctly, Port 1 should state READY. Repeat steps 3-9 in his tutorial. It will start the flashing process. Once you get an error, close the program, and remove your phones battery and disconnect it from your computer.
Turn on your phone, and receive signal. PROFIT.
Hope this helps you guys out a bit, and remember to hit thanks if this helped you.
Click to expand...
Click to collapse
XBSALL helped me out! It's finally working now! My problem was with the port. He got my phone rooted, changed USB port (I mistakenly was changing the wrong one), installed TWRP, put his ICS cleaned mod version on through TWRP zip install. It's all working now full bars of 3G!
help?
Finally got to flash ICS on phone but it was giving me errors everytime I wasn't using original baseband associated with .bin file. Now, I can't get it to boot in fastboot even using OMAP4boot I don't really understand when I need to insert fast the battery... OMAP4boot doesn't seem to get my phone...
You will always get errors as these are not full kdz files. If you are stuck at lg logo..try pull batt replace then hold vol- and power button til you see a factory reset screen do reset and boot..that made mine boot.
Sent from my LG-P925 using xda premium
Bdadd34 said:
You will always get errors as these are not full kdz files. If you are stuck at lg logo..try pull batt replace then hold vol- and power button til you see a factory reset screen do reset and boot..that made mine boot.
Sent from my LG-P925 using xda premium
Click to expand...
Click to collapse
Sorry, maybe I wasn't clear enough, but my phone boots now, it's only I had to flash it with the O3D fls file and not the .fls I was supposed to use so I get a working ICS without any network.
Now that i'm trying to complete step 2 to get te right baseband, i can't get the phone to boot in download mode even using OMAP fasboot flash. the software just don't say anything appart from "waiting for phone".
So I was wondering if I was doing anything wrong
b.charles.gagne said:
Sorry, maybe I wasn't clear enough, but my phone boots now, it's only I had to flash it with the O3D fls file and not the .fls I was supposed to use so I get a working ICS without any network.
Now that i'm trying to complete step 2 to get te right baseband, i can't get the phone to boot in download mode even using OMAP fasboot flash. the software just don't say anything appart from "waiting for phone".
So I was wondering if I was doing anything wrong
Click to expand...
Click to collapse
Try the resurrection guide by xbsall it finally worked for me after I did everything I was supposed to I kept missing simple steps
Sent from my LG-SU760 using xda app-developers app
wayno140 said:
Try the resurrection guide by xbsall it finally worked for me after I did everything I was supposed to I kept missing simple steps
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
Finally download mode is quite simple to acess (discovered on my own searching for a recovery)
1- power, vol+ , 3d button pressed
2- on lg logo release power
3- after 2 seconds approx release 3d button
4- wait for the korean page indicating LG SERVICE and a phone
you should be in it!!
now i'm getting a curious RAM writing error while using this mode on lg flash tool
b.charles.gagne said:
Finally download mode is quite simple to acess (discovered on my own searching for a recovery)
1- power, vol+ , 3d button pressed
2- on lg logo release power
3- after 2 seconds approx release 3d button
4- wait for the korean page indicating LG SERVICE and a phone
you should be in it!!
now i'm getting a curious RAM writing error while using this mode on lg flash tool
Click to expand...
Click to collapse
You need to do it this way http://forum.xda-developers.com/showthread.php?p=32945961 and only the way read the whole first 2 pages and do everything xbsall is a genius as are the people that worked with him to come up with the guide
Sent from my LG-SU760 using xda app-developers app
wayno140 said:
You need to do it this way http://forum.xda-developers.com/showthread.php?p=32945961 and only the way read the whole first 2 pages and do everything xbsall is a genius as are the people that worked with him to come up with the guide
Sent from my LG-SU760 using xda app-developers app
Click to expand...
Click to collapse
it's almost the 10th time I follow the guide step by step by step... I think or i'm always doing wrong something or it's something else with my phone... I may have misconfigured one port but i do NEVER NEVER at all in the process see OMAP4430 device in my device manager.. so the little windows tool is not doing anything... maybe if someone wanna teamviewer they can see for themselves what it gives.
Wahoo, ICS + network
finally found that there was the correct driver for my computer in the omap4boot folder and not in everyother one I was installing, flashed with the guide after i found this driver and everything works fine
only thing i'm struggling is to set apns to get 3G any tricks?
Do a Google search for AT&T 4G APN (or whoever our carrier is). You can also create an APN with the word "phone" in the first two blanks, name and APN (I think), and it should give you access to 3G and HSPA. I hit 6.7mbps on Speed Test.
Sent from my LG-SU760 using xda app-developers app
So I bricked my SGH-T759. Spent 10+ hours trying to fix this POS. FINALLY I found someone posting a stock rom. Problem was that the message was really geared towards people who knew what they were doing, and not having used the tools or this phone in that way, I did not. This made matters worse. HOWEVER, I did fix it! So I am going to post a detailed guide and recompiled package.
First off, credit to the guy who found the files, Devil-Dog, this is his original post: http://forum.xda-developers.com/showthread.php?t=2462234
I am not responsible for what this may do to your phone, mother, sister, or girlfriend. Use at your own risk.
OK, lets begin.
Step by Step Unbrick
Download Unbrick-SGH-T759-1.0.tar.gz
Download Heimdall
Both files should be bellow
If you are using Vista or up and 64 bit, disable driver enforcement. Google this part.
Unzip Heimdall
Enter the driver folder
Turn off your phone and unplug it
Hold the volume + AND - buttons down
Plug it into the computer
It should appear in download mode
Run zadig.exe as admin
Under Options and select List all devices
Select Samsung USB Composite or (Unknown Device if you didnt install the Samsung drivers)
Install Driver
Now go back a folder
Run heimdall-frontend.exe as admin
Under Heimdall Firmware Package, hit Browse
Choose Unbrick-SGH-T759-1.0.tar.gz
Hit Load / Customize
Hit start, and WAIT
After phone reboots, you should now be fine!
Not so complicated eh? THAT took me 10+ hours to figure out (and find those files) >.>
Hopefully this alleviates a lot of headaches for those of you struggling!
Downloads (Attachments gave me 404 errors?!):
http://electrodepc.com/heimdall.zip
http://electrodepc.com/Unbrick-SGH-T759-1.0.tar.gz
Xeology said:
So I bricked my SGH-T759. Spent 10+ hours trying to fix this POS. FINALLY I found someone posting a stock rom. Problem was that the message was really geared towards people who knew what they were doing, and not having used the tools or this phone in that way, I did not. This made matters worse. HOWEVER, I did fix it! So I am going to post a detailed guide and recompiled package.
First off, credit to the guy who found the files, Devil-Dog, this is his original post: http://forum.xda-developers.com/showthread.php?t=2462234
I am not responsible for what this may do to your phone, mother, sister, or girlfriend. Use at your own risk.
OK, lets begin.
Step by Step Unbrick
Download Unbrick-SGH-T759-1.0.tar.gz
Download Heimdall
Both files should be bellow
If you are using Vista or up and 64 bit, disable driver enforcement. Google this part.
Unzip Heimdall
Enter the driver folder
Turn off your phone and unplug it
Hold the volume + AND - buttons down
Plug it into the computer
It should appear in download mode
Run zadig.exe as admin
Under Options and select List all devices
Select Samsung USB Composite or (Unknown Device if you didnt install the Samsung drivers)
Install Driver
Now go back a folder
Run heimdall-frontend.exe as admin
Under Heimdall Firmware Package, hit Browse
Choose Unbrick-SGH-T759-1.0.tar.gz
Hit Load / Customize
Hit start, and WAIT
After phone reboots, you should now be fine!
Not so complicated eh? THAT took me 10+ hours to figure out (and find those files) >.>
Hopefully this alleviates a lot of headaches for those of you struggling!
Downloads (Attachments gave me 404 errors?!):
https://dl.dropboxusercontent.com/u/18601879/heimdall.zip
https://dl.dropboxusercontent.com/u/18601879/Unbrick-SGH-T759-1.0.tar.gz
Click to expand...
Click to collapse
Can you please reupload the Unbrick-SGH-T759-1.0.tar.gz because it is not downloading any more from dropbox server .
please , it is urgent as I bricked my Galaxy Exhibit SGH-T759 phone .
Thanks in advance
machhho said:
Can you please reupload the Unbrick-SGH-T759-1.0.tar.gz because it is not downloading any more from dropbox server .
please , it is urgent as I bricked my Galaxy Exhibit SGH-T759 phone .
Thanks in advance
Click to expand...
Click to collapse
It will be done in 5 minutes, uploading now. I re-uploaded to my company's website server so there wont be any bandwidth issues.
Xeology said:
It will be done in 5 minutes, uploading now. I re-uploaded to my company's website server so there wont be any bandwidth issues.
Click to expand...
Click to collapse
thanks alot
T769?
I think the T769 is the Galaxy Blaze not the Exhibit...
Xeology said:
So I bricked my SGH-T759. Spent 10+ hours trying to fix this POS. FINALLY I found someone posting a stock rom. Problem was that the message was really geared towards people who knew what they were doing, and not having used the tools or this phone in that way, I did not. This made matters worse. HOWEVER, I did fix it! So I am going to post a detailed guide and recompiled package.
First off, credit to the guy who found the files, Devil-Dog, this is his original post: http://forum.xda-developers.com/showthread.php?t=2462234
I am not responsible for what this may do to your phone, mother, sister, or girlfriend. Use at your own risk.
OK, lets begin.
Step by Step Unbrick
Download Unbrick-SGH-T759-1.0.tar.gz
Download Heimdall
Both files should be bellow
If you are using Vista or up and 64 bit, disable driver enforcement. Google this part.
Unzip Heimdall
Enter the driver folder
Turn off your phone and unplug it
Hold the volume + AND - buttons down
Plug it into the computer
It should appear in download mode
Run zadig.exe as admin
Under Options and select List all devices
Select Samsung USB Composite or (Unknown Device if you didnt install the Samsung drivers)
Install Driver
Now go back a folder
Run heimdall-frontend.exe as admin
Under Heimdall Firmware Package, hit Browse
Choose Unbrick-SGH-T759-1.0.tar.gz
Hit Load / Customize
Hit start, and WAIT
After phone reboots, you should now be fine!
Not so complicated eh? THAT took me 10+ hours to figure out (and find those files) >.>
Hopefully this alleviates a lot of headaches for those of you struggling!
Downloads (Attachments gave me 404 errors?!):
http://electrodepc.com/heimdall.zip
http://electrodepc.com/Unbrick-SGH-T759-1.0.tar.gz
Click to expand...
Click to collapse
Thanks so much for your step by step guide. I just finished unbrick my 3 years samsung exhibit 4G SGH-T759. Now it has an awsome stock ROM which already has rooted on its.
Just curious how I could change the weather's home screen? Does anyone know how? and how safe is it using someone else ROM?
Xeology said:
It will be done in 5 minutes, uploading now. I re-uploaded to my company's website server so there wont be any bandwidth issues.
Click to expand...
Click to collapse
I have done all this but my phone still connot find network services. please help me !!!
hi, can you update the link to download the firmware please, my phone t759 is bricked and i cant find the stock rom to restore it :/
4G mobile is a very important thing.if you have 4G it becomes easy to do any work on mobile