[Q] Flashing stock for S-OFF - One (M7) Q&A, Help & Troubleshooting

I'm looking to flash stock to S-Off my device. I found the stock rom that came with my phone (1.29.401.13), I tried to flash it in CWM, but didn't work. So what steps do I need to take to get back to stock? :S
CID:1.29.401.13
MID: PN07100
Thanks!

Edit : deleted

Reilly9 said:
I'm looking to flash stock to S-Off my device. I found the stock rom that came with my phone (1.29.401.13), I tried to flash it in CWM, but didn't work. So what steps do I need to take to get back to stock? :S
CID:1.29.401.13
MID: PN07100
Thanks!
Click to expand...
Click to collapse
Your CID isn't 1.29.401.13, it'll be something like HTC__001. What HBOOT version do you currently have?

Related

[Q]Reverting to stock firmware (three) and stock ROM (s-off)

Hey guys,
Right, I have a hardware issue with my phone so need to return it to Three UK.
Currently I have Android Revolution HD 11 on my phone and have updated to 2.17 firmware, s-off.
So I need stock, firmware to be reverted to 1.28.771 and to change my CID to H3G__001 (currently HTC__001). There doesn't appear to be an RUU for three.
First off I'm assuming the H3G nandroid backup in the "[COLLECTION] HTC M7 RUU, OTA, and Stock Nandroid Downloads" thread doesn't actually touch the firmware so it would remain at 2.17?
So my thinking is this:
Flash the generic europe RUU (do I need to lock my bootloader before doing this)? (RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe)
Change CID to H3G__001
Nandroid restore of H3G ROM. (M7 CWM Nandroid Backup / CID H3G__001 / 1.28.771.x )
s-off to lock and remove tamper.
s-on.
OTA update?
Will this work?
Or does anyone have a link to the 1.28.771 firmware?
Thanks for the help.
Ardmanz said:
Hey guys,
Right, I have a hardware issue with my phone so need to return it to Three UK.
Currently I have Android Revolution HD 11 on my phone and have updated to 2.17 firmware, s-off.
So I need stock, firmware to be reverted to 1.28.771 and to change my CID to H3G__001 (currently HTC__001). There doesn't appear to be an RUU for three.
First off I'm assuming the H3G nandroid backup in the "[COLLECTION] HTC M7 RUU, OTA, and Stock Nandroid Downloads" thread doesn't actually touch the firmware so it would remain at 2.17?
So my thinking is this:
Flash the generic europe RUU (do I need to lock my bootloader before doing this)? (RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13. 3231.27_10.31.1131.05_release_310878_signed.exe)
Change CID to H3G__001
Nandroid restore of H3G ROM. (M7 CWM Nandroid Backup / CID H3G__001 / 1.28.771.x )
s-off to lock and remove tamper.
s-on.
OTA update?
Will this work?
Or does anyone have a link to the 1.28.771 firmware?
Thanks for the help.
Click to expand...
Click to collapse
Any ideas?
You don't have to lock the bootloader and you need s-off to downgrade.
http://forum.xda-developers.com/showpost.php?p=42396455&postcount=20
Rest of the steps...well sounds good but unfortunatelly i'm not expert so dunno
I'm really interested if it works this way for you as i have a VF-uk one, and once i have to go back to stock this info would be really helpful.
Please let we know your progress
Good luck
prodizo said:
You don't have to lock the bootloader and you need s-off to downgrade.
http://forum.xda-developers.com/showpost.php?p=42396455&postcount=20
Rest of the steps...well sounds good but unfortunatelly i'm not expert so dunno
I'm really interested if it works this way for you as i have a VF-uk one, and once i have to go back to stock this info would be really helpful.
Please let we know your progress
Good luck
Click to expand...
Click to collapse
Hey,
Yup this worked perfectly (almost). Reset your CID to your originally carriers before running the nandroid backup or it will be missing your carriers boot screen.
The only thing is the recovery seems to be missing. I'd expect the HTC recovery to load when selecting it from the bootloader but all I get is a red triangle. I obviously need to sort this before sending it back (Monday).
Any ideas?
I haven't s-on'd yet because I want to sort out recovery first. That should be pretty simple though.
I guess I just need a link to stock recovery.img.
Just tried and mine does same. I have stock recovery so thats fine.
Hope you get a nice new one:laugh:
Cheers
Stock recovery will display a red triangle..your all set
Sent from my HTC One using xda app-developers app
Yup. I just realised. Completely 100% back to stock now with s-on.
It's been quite a journey. Hopefully they can repair it quickly so I can get ARHD 11 back on.
Ardmanz said:
Yup. I just realised. Completely 100% back to stock now with s-on.
It's been quite a journey. Hopefully they can repair it quickly so I can get ARHD 11 back on.
Click to expand...
Click to collapse
Ardmanz said:
Yup. I just realised. Completely 100% back to stock now with s-on.
It's been quite a journey. Hopefully they can repair it quickly so I can get ARHD 11 back on.
Click to expand...
Click to collapse
Would you make the step by step?
It would really helpful
If I ain't wrong,
1. Get the RUU's
2. Change CID to HTC_001 before flashing RUU
3. Flash RUU
4. Write original CID
5. Nandroid Restore
6. Re S-ON with Revone
Is that right?
Grand_Goblin said:
Would you make the step by step?
It would really helpful
If I ain't wrong,
1. Get the RUU's
2. Change CID to HTC_001 before flashing RUU
3. Flash RUU
4. Write original CID
5. Nandroid Restore
6. Re S-ON with Revone
Is that right?
Click to expand...
Click to collapse
Yup, those are the exact steps that I took.
Note* make sure you just boot into custom recovery and don't actually flash it when restoring your nandroid backup. Having custom recovery on your device is a dead give away.
Grand_Goblin said:
Would you make the step by step?
It would really helpful
If I ain't wrong,
1. Get the RUU's
2. Change CID to HTC_001 before flashing RUU
3. Flash RUU
4. Write original CID
5. Nandroid Restore
6. Re S-ON with Revone
Is that right?
Click to expand...
Click to collapse
Ardmanz said:
Yup, those are the exact steps that I took.
Note* make sure you just boot into custom recovery and don't actually flash it when restoring your nandroid backup. Having custom recovery on your device is a dead give away.
Click to expand...
Click to collapse
sorry man, but "flash it" refers to?
I don't get it and I don't wanna mess up
Grand_Goblin said:
sorry man, but "flash it" refers to?
I don't get it and I don't wanna mess up
Click to expand...
Click to collapse
Normally you would use the following command to install custom recovery:
Code:
fastboot flash recovery recovery.img
Use this command instead:
Code:
fastboot boot recovery.img
That allows you to boot into custom recovery without actually installing it onto your phone.
Ardmanz said:
Normally you would use the following command to install custom recovery:
Code:
fastboot flash recovery recovery.img
Use this command instead:
Code:
fastboot boot recovery.img
That allows you to boot into custom recovery without actually installing it onto your phone.
Click to expand...
Click to collapse
matursuwun - Thank You so much! (in Javanese)

[Q] how to downgrade firmware

I updated firmware to 2.24.401(s-off),but now I have a camera issue,I want to go back to 1.29.708.16(I can't find this firmware) then turn to s-on for warranty,there isn't update to 4.2 in HK(where I bought the phone),so how can I downgrade firmware to 1.29,and can I change the firmware number by change "mainver" in android-info.txt ?
dingnangen said:
I updated firmware to 2.24.401(s-off),but now I have a camera issue,I want to go back to 1.29.708.16(I can't find this firmware) then turn to s-on for warranty,there isn't update to 4.2 in HK(where I bought the phone),so how can I downgrade firmware to 1.29,and can I change the firmware number by change "mainver" in android-info.txt ?
Click to expand...
Click to collapse
If you are returning your phone for service then you can run an RUU if your phone has one.
It will reset everything back to stock, even the firmware. Check here:
http://forum.xda-developers.com/showthread.php?p=39588860
crushalot said:
If you are returning your phone for service then you can run an RUU if your phone has one.
It will reset everything back to stock, even the firmware. Check here:
http://forum.xda-developers.com/showthread.php?p=39588860
Click to expand...
Click to collapse
can 2.24 firmware use 1.29 ruu?how to do it ?
dingnangen said:
can 2.24 firmware use 1.29 ruu?how to do it ?
Click to expand...
Click to collapse
If your s-off then a RUU can downgrade your firmware. (I did this on a phone I returned for service without issues) If you are still s-on I don't think it will.
You just download the RUU.exe and run it on your PC and it guides you through resetting everything on the phone.
crushalot said:
If your s-off then a RUU can downgrade your firmware. (I did this on a phone I returned for service without issues) If you are still s-on I don't think it will.
You just download the RUU.exe and run it on your PC and it guides you through resetting everything on the phone.
Click to expand...
Click to collapse
thank you very much,i'll try it.if there aren't my ruus of region,I use other region ruu,can I get warranty?
That depends on the carrier/vendor. If you don't have a RUU you could also run an RUU for another area (Since your S-off) to downgrade the firmware and then root it and use one of the posted stock nandroids to restore to your proper areas stock config. Then do the stuff to re-lock your bootloader. http://forum.xda-developers.com/showthread.php?p=43458497
crushalot said:
That depends on the carrier/vendor. If you don't have a RUU you could also run an RUU for another area (Since your S-off) to downgrade the firmware and then root it and use one of the posted stock nandroids to restore to your proper areas stock config. Then do the stuff to re-lock your bootloader. http://forum.xda-developers.com/showthread.php?p=43458497
Click to expand...
Click to collapse
I can back to stock rom,but firmware version can't change,because there aren't ruu of HongKong,any ideas to change firmware version?
Since your S-off you can change your CID to use another RUU like this one:
http://bugsylawson.com/files/file/1...14325013-1033115001-release-311678-signedexe/
The RUU will set the device firmware back to stock. Then restore your stock ROM and you should be ok.
Also if you have it stock rom and setup now, you may just want to put S-on so that it says Locked and S-on on bootloader and your vendor will probably not care about the firmware version.
crushalot said:
Since your S-off you can change your CID to use another RUU like this one:
http://bugsylawson.com/files/file/1...14325013-1033115001-release-311678-signedexe/
The RUU will set the device firmware back to stock. Then restore your stock ROM and you should be ok.
Also if you have it stock rom and setup now, you may just want to put S-on so that it says Locked and S-on on bootloader and your vendor will probably not care about the firmware version.
Click to expand...
Click to collapse
thank you ,downing ruu now . is there Hboots red warning by using ruu back to stock?
dingnangen said:
thank you ,downing ruu now . is there Hboots red warning by using ruu back to stock?
Click to expand...
Click to collapse
The red warning in hboot is from being unlocked. Once you have back to stock (especially recovery) then the red warning will be gone. For sure after re-locking.
crushalot said:
Since your S-off you can change your CID to use another RUU like this one:
http://bugsylawson.com/files/file/1...14325013-1033115001-release-311678-signedexe/
The RUU will set the device firmware back to stock. Then restore your stock ROM and you should be ok.
Also if you have it stock rom and setup now, you may just want to put S-on so that it says Locked and S-on on bootloader and your vendor will probably not care about the firmware version.
Click to expand...
Click to collapse
how to backup my stock recovery,because I must flash custom recovery to restore my rom,then back to the stock recovery.
dingnangen said:
how to backup my stock recovery,because I must flash custom recovery to restore my rom,then back to the stock recovery.
Click to expand...
Click to collapse
Sorry, I'm not sure I understand what you are asking here.
crushalot said:
Sorry, I'm not sure I understand what you are asking here.
Click to expand...
Click to collapse
how can I backup stock recovery?
because there are not ruu of HK,so I should use TWRP to restore nandroid backup from HK htc one. then back to stock recovery .
Yes you would TWRP to restore and then flash the stock recovery and relock.
Here is a post where I helped another and it has the stock recovery and instructions for flashing if needed.
http://forum.xda-developers.com/showpost.php?p=43625746&postcount=17
Just an FYI that this method will not downgrade the firmware, but just get you back to locked and a stock look, but with the newer firmware.
Let me know if you need something else.

Going back to stock state

Hello guys,
I need some serious help!
I have a HTC One (Indian model) and I updated to 4.2.2 when I bought it, unlocked the bootloader, installed TWRP and flashed a custom ROM. Now I want to go back to stock state, as in, stock recovery, locked bootloader and stock OS. I can flash the stock recovery and lock my bootloader but how to go to stock OS?
Model ID (MID): PN0711000
CID: HTC__038
I cannot find the RUU for my CID/MID combo. I downloaded RUU_M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.exe and ran it but it threw a Incorrect model ID error.
Can anyone give me the link for the correct RUU which will work for my device? If not, then can anyone tell me a way to go back to stock state so that I can update the firmware to the latest version?
Thanks
ssrij said:
Hello guys,
I need some serious help!
I have a HTC One (Indian model) and I updated to 4.2.2 when I bought it, unlocked the bootloader, installed TWRP and flashed a custom ROM. Now I want to go back to stock state, as in, stock recovery, locked bootloader and stock OS. I can flash the stock recovery and lock my bootloader but how to go to stock OS?
Model ID (MID): PN0711000
CID: HTC__038
I cannot find the RUU for my CID/MID combo. I downloaded RUU_M7_UL_JB_50_hTC_Asia_WWE_1.29.707.3_R_Radio_4A.14.3250.13_10.33.1150.01_release_311678_signed.exe and ran it but it threw a Incorrect model ID error.
Can anyone give me the link for the correct RUU which will work for my device? If not, then can anyone tell me a way to go back to stock state so that I can update the firmware to the latest version?
Thanks
Click to expand...
Click to collapse
I can't help with you first question but for the second read:
http://forum.xda-developers.com/showthread.php?t=2265618

[Q] return to stock after rum runner

I am TMOB101 (the german t-mobile) i have successfully s-offed using rum runner.
There is no RUU for my phone as far as i know..
Is there a way to s-on again?
does rum runner backup my original hboot, so i can restore it to go back s-on?
Nomader0 said:
I am TMOB101 (the german t-mobile) i have successfully s-offed using rum runner.
There is no RUU for my phone as far as i know..
Is there a way to s-on again?
does rum runner backup my original hboot, so i can restore it to go back s-on?
Click to expand...
Click to collapse
You can flash the GuruReset ROM for your version: http://www.htc1guru.com/dld/guru_reset_m7_2-24-111-3-zip/
Make sure you choose to flash stock recovery and boot etc.
When all back to fully stock you are then safe to s-on again by issuing the following command: fastboot oem writesecureflag 3
Hope that comes in useful
Nomader0 said:
I am TMOB101 (the german t-mobile) i have successfully s-offed using rum runner.
There is no RUU for my phone as far as i know..
Is there a way to s-on again?
does rum runner backup my original hboot, so i can restore it to go back s-on?
Click to expand...
Click to collapse
Why do you need to s-on? And with s-off you can flash any RUU that you want. To s-on again, the command is "fastboot oem writesecureflag 3", but you need to be COMPLETELY stock before you do this, or you'll have a hard brick.
Sent from my iPod touch using Tapatalk
thank you for your answers.. I want to s-on to send back for warranty issues (purple tint).
I just want to understand how it works..
Rum runner installed an unsecured hboot. correct?
in order to s-off i need to go back to stock hboot first? people install RUU so they can install 1)stock rom, 2)stock radio, 3) stock recovery 4)stock hboot correct?
the Guru Reset rom just installs rom, recovery and radio (no hboot?)
can i just install any RUU and s-on? i thought i needed the one matching my phone
ok i found this http://www.htc1guru.com/guides/return-stock-guide/ and answered most of my questions.. except one:
As i said there is no RUU for me.. i will use a nandroid to restore most of the stuff. BUT there will be a mismatch between my stock Rom installed and the firmware (what is written in bootloader screen OS:XXXXXXX) How can i fix that?
can i just install the TMOB101 firmware from here http://android-revolution-hd.blogspot.gr/p/android-revolution-hd-mirror-site-var.html and fix the mismatch?
Nomader0 said:
ok i found this http://www.htc1guru.com/guides/return-stock-guide/ and answered most of my questions.. except one:
As i said there is no RUU for me.. i will use a nandroid to restore most of the stuff. BUT there will be a mismatch between my stock Rom installed and the firmware (what is written in bootloader screen OS:XXXXXXX) How can i fix that?
can i just install the TMOB101 firmware from here http://android-revolution-hd.blogspot.gr/p/android-revolution-hd-mirror-site-var.html and fix the mismatch?
Click to expand...
Click to collapse
Once you flash the guru reset, and then perform the OTA, you'll be on the same firmware after install.
Yeah but that will be different than the one my cid is supposed to have.. won't HTC service notice?

[Q]Back to Stock-Problem

Hi everyone,
I'm trying to get my htc one back to stock, to get the latest ota update (4.4.3), so that I can use the latest venomrom (I think it's 7.0.1 by now).
As far as I understood it, I have to go back to stock to do that, but there were some problems I could not fix.
First my Version is 2.24.206.7 and I can't find any stock recovery for it, I searched the whole internet (that's how it felt), but nothing. I have a backup from my stock rom, that is not the problem.
Second I'm currently S-on, and my hboot is 1.54. I tried to s-off it with firewater, but it did not work.
And I have a custom kernel (ElementalX) installed, is that a problem? If it is, how can I fix it?
I hope someone can help me, and these questions are not already answered somewhere.
Thank you!
umbertoftw said:
Hi everyone,
I'm trying to get my htc one back to stock, to get the latest ota update (4.4.3), so that I can use the latest venomrom (I think it's 7.0.1 by now).
As far as I understood it, I have to go back to stock to do that, but there were some problems I could not fix.
First my Version is 2.24.206.7 and I can't find any stock recovery for it, I searched the whole internet (that's how it felt), but nothing. I have a backup from my stock rom, that is not the problem.
Second I'm currently S-on, and my hboot is 1.54. I tried to s-off it with firewater, but it did not work.
And I have a custom kernel (ElementalX) installed, is that a problem? If it is, how can I fix it?
I hope someone can help me, and these questions are not already answered somewhere.
Thank you!
Click to expand...
Click to collapse
Try to s-off with Rumrunner
after your s-off it's easy to update your firmware and flash ViperOne rom
Thanks for the fast answer!
I wanted to s-off with rumrunner using this guide: http://forum.xda-developers.com/showthread.php?t=2488772
But my firmware is not available, or can I use the universal Rumrunner? I think it does not work with hboot 1.54.
umbertoftw said:
Thanks for the fast answer!
I wanted to s-off with rumrunner using this guide: http://forum.xda-developers.com/showthread.php?t=2488772
But my firmware is not available, or can I use the universal Rumrunner? I think it does not work with hboot 1.54.
Click to expand...
Click to collapse
Yes use the Universal > http://rumrunner.us/rumrunner_downloads/rumrunner_HTC_0.5.0.zip
Ok I tried it with rumrunner universal, but it says: "looks like device is not rooted AND lacks an unsecure kernel. su or FU!!!"
But it is rooted oO any idea?
Thanks
EDIT: I tried it again with my stock rom, but it didn't work either. It said i should flash another kernel, or another rom and retry.
umbertoftw said:
Ok I tried it with rumrunner universal, but it says: "looks like device is not rooted AND lacks an unsecure kernel. su or FU!!!"
But it is rooted oO any idea?
Thanks
EDIT: I tried it again with my stock rom, but it didn't work either. It said i should flash another kernel, or another rom and retry.
Click to expand...
Click to collapse
stock rom plus ElementalX is a good combo
okay, I reinstalled ElementalX (in the right version) as stockish as possible, and after many many reboots, and a few prayers and cries it did WORK!!
Thank you very much
What is the next step, because I don't have any stock recovery for my firmware? or a stock kernel..
EDIT: I was searching for RUU to flash, but the weird thing is, that my CID is O2 germany, and my firmware is O2 UK. What should I flash? There is no exact RUU for my CID, or I did not find it..
I'm really clueless how I could get the latest OTA, I don't find any fitting backup or ruu for my phone..
Or is there any other way to get the OTA's?
umbertoftw said:
I'm really clueless how I could get the latest OTA, I don't find any fitting backup or ruu for my phone..
Or is there any other way to get the OTA's?
Click to expand...
Click to collapse
You now have s-off you can convert your phone to international
you need this
MID_Change_1.01.zip
https://www.androidfilehost.com/?fid=23501681358538634
use modelid: PN0710000
and simply change your CID to HTC__001
fastboot oem writecid HTC__001
then use this RUU
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
or here
http://www.androidruu.com/getdownlo...10.38r.1157.04L_release_353069_signed_2-1.exe
you should get OTA, then go back to unlocking your bootloader and Rooting as usual

Categories

Resources