Hello guys, i'n new here and i'm in trouble. My phone was to reppair and come back Updated. But now, he doesn't work 3g anymore. I have one X8i E15i, and the cofiguration are: Baseband 015 e kernel 2.1.1.A.0.6 ;
I don't know how was before the reppair, but used to work on 3g, and i want to install the configuration that i had before.
For informations, i'm in brazil, using VIVO.
Sorry for bad english.
ok
IAmNice said:
Try repair phone with pcc and have you turned on dataroaming? It might be a silly small problem. (Happend to me once) btw post in the right section next time
Sent from my E15i using xda app-developers app
Click to expand...
Click to collapse
I've tryed with pcc and doesn't work. NOw i will test with roaming, but my 2g doesn't work anymore after the pcc reppair.
Sorry for the section, i'm new
Ps: Roaming doesn't work so far. I'm telling you, i now realized that the baseband cannot connect in brazil
In america we use e15a, maybe that is what is causing the problem, use flashtool and flash e15a baseband. That will solve the problem likely
Sent from my x8 using xda premium
Steven87 said:
In america we use e15a, maybe that is what is causing the problem, use flashtool and flash e15a baseband. That will solve the problem likely
Sent from my x8 using xda premium
Click to expand...
Click to collapse
Currently, these basebands are available:
X8i - E15i
Baseband 006 - kernel 2.0.2.A.0.24
Baseband 015 - kernel 2.1.1.A.0.6
X8a - E15a
Baseband 006 - kernel 2.0.2.A.0.24
Baseband 015 - kernel 2.1.1.A.0.6
I took this from Se xperiax blogspot and my cell phone is X8i- E15i with baseband 015 - kernel 2.1.1.A.0.6. However, doens't work, so i want put baseband 06 - kernel 2.0.2.A.0.24. But How i do it?
change
Hey guys, i changed my baseband to all x8 versions, e15a, e15i, 006, 015. But my 3g still unworking. So, now i want to change my version, i use 2.1.1.A.0.6 and want to get back to 2.0.2.A.0.24
How to do it?
Then the problem might be from your provider, the only way to get back to that firmware is flashtool, but i dont know where to get that particular one.
flash
Steven87 said:
Then the problem might be from your provider, the only way to get back to that firmware is flashtool, but i dont know where to get that particular one.
Click to expand...
Click to collapse
i have flashtool here, but don't know how the kind of archive is used to change to 2.0.2
Is an ftf?
Hey,
first of, sorry if this has already been asked (and answered..) But I tried my best searching all the sub-forums.
Anywho.
I'm not sure if I am imagining this or not, but after updating to 253 my wireless and cell reception has become worse. Albeit I have quite poor reception in the basement, but the phone looses mobile and/or wireless connection all the time (and I'm positive it didn't do that before, at least).
I have tried both the Indian version and the Swedish version, but they both have the same baseband, i.e 9x15A-ACEFWMAZQ-30110041-23. I am located in Norway, but I figured the baseband will at least be the same for both Sweden and Norway(?). I have not looked at the 'Nordic' version yet tho.
I have not checked if the baseband of 434 and 253 actually differ, but I'm thinking they do. Currently I'm running Carbonrom, so the question is, is it possible to flash just the baseband of 434 onto Carbonrom (provided they're not the same that is..) and should I try to find the Norwegian-specific ftf?
I've been doing nothing but flashing different roms these last days and I think I'm going to cough up hairballs if I have to re-install and customize the rom to my liking, yet again. So I just want to be sure before doing anything (un)risky..
regards,
me
Yes you can flash the baseband separately with flashtool.
And yes 434 has different baseband than the new update.
Sent from my C6603 using xda premium
gm007 said:
Yes you can flash the baseband separately with flashtool.
And yes 434 has different baseband than the new update.
Sent from my C6603 using xda premium
Click to expand...
Click to collapse
Well I tried flashing both a baseband from 434 UK version and 434 Swedish version, but it has not changed.. Is there anything else than flashing the baseband from flashtool I should know about?
avelon said:
Well I tried flashing both a baseband from 434 UK version and 434 Swedish version, but it has not changed.. Is there anything else than flashing the baseband from flashtool I should know about?
Click to expand...
Click to collapse
Yes you done it correctly but you wont see the difference in "about phone".you need to change some system files to get the right info but not necessary.
All you have to do now is checking if you have better signal and connectivity or not.
Sent from my C6603 using xda premium
At the moment I am running Monkx essential rom.
I would like to change my baseband to the one from the 2.67 update because my network reception is poor.
Everything else I would like to keep
Can anybody help me to get the latest baseband from the NL version of 2.67 and how to change it?
Thxs in advance
[email protected] said:
At the moment I am running Monkx essential rom.
I would like to change my baseband to the one from the 2.67 update because my network reception is poor.
Everything else I would like to keep
Can anybody help me to get the latest baseband from the NL version of 2.67 and how to change it?
Thxs in advance
Click to expand...
Click to collapse
You know you can flash any baseband as long as it's from the same model. I flashed the Hong Kong one and it's working fine in the UK
I tried with flashtool,it flashes but baseband keeps unchanged.
What should I flash with it??
Is it maybe related to which kernel I use?
This is the kernel and baseband from .67 flash it with flashtool but exclude the kernel if don't want to change it.
http://www.mediafire.com/?i597upl9fswxi5d
Sent from my C6603 using xda premium
Hi guys, please I need some help with my xperia z, it presently does not get any network regardless of changing sim. Dis occurred few days after upgrading to newest firmware .67. It worked fine after some days but signal started gettin poorer.realised dat after givin the phone a little bump it comes back to full signal.eventually it stopped getting network altogether, except in rare cases when I feel I'm close to a tower , it searches but cannot register on the network sayin to ensure that a network signal is in range 99asu.I also cannot switch to manual select of network. Please anybody with a solution. Want to know if its a hardware or software problem. I don't have a sony service centre here that can help me.thanks
I had a similar issue and found that my "APN" was missing (Telcel Mexico). I created a new APN from information on the Internet and all is well.
Sent from my C6602 using XDA Premium 4 mobile app
gwithrow said:
I had a similar issue and found that my "APN" was missing (Telcel Mexico). I created a new APN from information on the Internet and all is well.
Sent from my C6602 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
i doubt if its a similar issue. i dont get any signal at all
my brother it seems that the device is faulty... get it RMA'd
rohit25 said:
my brother it seems that the device is faulty... get it RMA'd
Click to expand...
Click to collapse
Pls what do you mean by RAM'd?
mibz said:
Hi guys, please I need some help with my xperia z, it presently does not get any network regardless of changing sim. Dis occurred few days after upgrading to newest firmware .67. It worked fine after some days but signal started gettin poorer.realised dat after givin the phone a little bump it comes back to full signal.eventually it stopped getting network altogether, except in rare cases when I feel I'm close to a tower , it searches but cannot register on the network sayin to ensure that a network signal is in range 99asu.I also cannot switch to manual select of network. Please anybody with a solution. Want to know if its a hardware or software problem. I don't have a sony service centre here that can help me.thanks
Click to expand...
Click to collapse
What model do you have??
You upgraded by PC Companion or by flashtool?? Maybe the baseband is incorrect and the phone don't have signal, maybe your carrier use two band and not both are in all coverage.
yamiAMR said:
What model do you have??
You upgraded by PC Companion or by flashtool?? Maybe the baseband is incorrect and the phone don't have signal, maybe your carrier use two band and not both are in all coverage.
Click to expand...
Click to collapse
Initially upgraded to .434 using flashtool, then .67 by OTA. By baseband do u mean 2g and 3g? Cos I don't get any form of signal at all.
Hi there, I have had the same problem: after updating the XZ to 4.2.2 (2.67 over OTA) the signal dropped instantly. Therefore I had to send it back Sony Care. They fixed it. The update has overwritten a different smallband/baseband-version above the other one, just as I suspected. I bet you can flash it yourself (your an XDA user..) instead of waiting 2 weeks or more. If you don't know how it works and you've absolutely no experience with flashing, just send it back to Sony care.
I think the easiest way is to flash a different (older) baseband-version on your XZ, reboot/factory reset and see if it works. The second method is to try downgrading the software to .244 INCLUDING the baseband-version, then update it by flashing the XZ to 2.67 while EXCLUDING the baseband-version. The third option is to re-flash (with flashtool) the 2.67 update but a different version (GLOBAL).
My phone details:
Modelnumber: C6603
Android-version: 4.2.2
Smallbandversion: 9x15A-ACEFWMAZQ-30110068-44
Kernelversion: 3.4.0g43a9ba9
Buildnumber: 10.3.1.A.2.67
Altough your smallband/baseband may differ from mine. Therefore, please find your own software-version. I'm using:
GLOBAL-LTE_10.3.1.A.2.67 (Netherlands)
Goodluck! Please let us know about your issue:fingers-crossed:.
mibz said:
Initially upgraded to .434 using flashtool, then .67 by OTA. By baseband do u mean 2g and 3g? Cos I don't get any form of signal at all.
Click to expand...
Click to collapse
But what Xperia Z model do you have?? C6603, C6602, C6606??
I have a similar situation in the case of C6603, in my carrier sometimes I have 2G signal but never 3G and other times no signal. In the case of OTA or PC Companion updates, sometimes upgrade to diferent model or carrier, I have a friend that upgrade his Xperia Arc by PC Companion but with the uncarrier firmware. Maybe this is your case, the OTA firmware don't well upgrade your base band.
In this case I suppose that you can flash only the baseband by Flashtool, but be carreful that the firmware was made for your Xperia Z (C6603, C6602, C6606).
yamiAMR said:
But what Xperia Z model do you have?? C6603, C6602, C6606??
I have a similar situation in the case of C6603, in my carrier sometimes I have 2G signal but never 3G and other times no signal. In the case of OTA or PC Companion updates, sometimes upgrade to diferent model or carrier, I have a friend that upgrade his Xperia Arc by PC Companion but with the uncarrier firmware. Maybe this is your case, the OTA firmware don't well upgrade your base band.
In this case I suppose that you can flash only the baseband by Flashtool, but be carreful that the firmware was made for your Xperia Z (C6603, C6602, C6606).
Click to expand...
Click to collapse
ok thanks i use a c6602
tally114 said:
Hi there, I have had the same problem: after updating the XZ to 4.2.2 (2.67 over OTA) the signal dropped instantly. Therefore I had to send it back Sony Care. They fixed it. The update has overwritten a different smallband/baseband-version above the other one, just as I suspected. I bet you can flash it yourself (your an XDA user..) instead of waiting 2 weeks or more. If you don't know how it works and you've absolutely no experience with flashing, just send it back to Sony care.
I think the easiest way is to flash a different (older) baseband-version on your XZ, reboot/factory reset and see if it works. The second method is to try downgrading the software to .244 INCLUDING the baseband-version, then update it by flashing the XZ to 2.67 while EXCLUDING the baseband-version. The third option is to re-flash (with flashtool) the 2.67 update but a different version (GLOBAL).
My phone details:
Modelnumber: C6603
Android-version: 4.2.2
Smallbandversion: 9x15A-ACEFWMAZQ-30110068-44
Kernelversion: 3.4.0g43a9ba9
Buildnumber: 10.3.1.A.2.67
Altough your smallband/baseband may differ from mine. Therefore, please find your own software-version. I'm using:
GLOBAL-LTE_10.3.1.A.2.67 (Netherlands)
Goodluck! Please let us know about your issue:fingers-crossed:.
Click to expand...
Click to collapse
thanks a lot, i'l try what u suggested, i know how to flash but dunno how i can do that without the baseband like u said, cos i already did a factory reset .i use a c6602 guess il find a version here that i can use.i'l hola at you if i hit any roadblocks cos i dont have esony care here.thanks a lot
mibz said:
ok thanks i use a c6602
Click to expand...
Click to collapse
Look this: C6602 10.3.1.A.2.67 STOCK
If you have doubts and I can help you tell me.
To find your version, just dial *#*#7378423#*#* => service info => software info => File system version: ......; download it from Xda and (re-)flash it. I've read about this; it happens a lot with XZ's with the GLOBAL firmware. You've probably the same version. Good luck and please let us know
tally114 said:
To find your version, just dial *#*#7378423#*#* => service info => software info => File system version: ......; download it from Xda and (re-)flash it. I've read about this; it happens a lot with XZ's with the GLOBAL firmware. You've probably the same version. Good luck and please let us know
Click to expand...
Click to collapse
hi, i jst re flashed with the 2.67 version the other guy posted in this thread, and its still not working, no network signal at all (0 dbm 99 asu), i realised i have the same baseband and kernel version with yours although i use a c6602. its global_hspa though.what do you think i should do next please. thanks
mibz said:
hi, i jst re flashed with the 2.67 version the other guy posted in this thread, and its still not working, no network signal at all (0 dbm 99 asu), i realised i have the same baseband and kernel version with yours although i use a c6602. its global_hspa though.what do you think i should do next please. thanks
Click to expand...
Click to collapse
Try to flash full firmware, because you don't have signal at all, maybe could be hardware issue. Cultural question, You try your sim card in another phone, don't you?
Okay I eventually found out what the problem was.it's a hardware problem, connection of the antenna near the vibrator, bottom right when lookin at back of phone was loose.thanks to all who posted suggestions.eventually opened it myself.
i need baseband for 10.5.1.A.0.283 build number for my xperia z c6602. can anyone give me the link of baseband.ftf file only. or can anybody upload the baseband. ftf file. i'll be thankfull to him.
r.ifat381 said:
i need baseband for 10.5.1.A.0.283 build number for my xperia z c6602. can anyone give me the link of baseband.ftf file only. or can anybody upload the baseband. ftf file. i'll be thankfull to him.
Click to expand...
Click to collapse
I have never been successful in creating individual package but here you go , if not below is the full pack as well
Baseband from C6602_Customized IN_1270-7186_10.5.1.A.0.283_R2D_4.4.4.ftf
https://drive.google.com/open?id=0B5MEXx6C9p1jd3lOZnBLNl80Z0k&authuser=0
Full C6602_Customized IN_1270-7186_10.5.1.A.0.283_R2D_4.4.4.ftf
https://drive.google.com/open?id=0B5MEXx6C9p1jNkVtdDNBVVVxOG8&authuser=0
Thanks a lot bro.....
Sent from my C6603 using xda app-developers app
Have you try hard reset ?
Hold volumn + and power until your device vibrate 3 time
hacphongthan said:
Have you try hard reset ?
Hold volumn + and power until your device vibrate 3 time
Click to expand...
Click to collapse
tried every thing to get ride of null imei. but can't get the solution. then i flash a 4.2.2 baseband. now my imei is back. but that baseband is from xz c6603 model. thats why i need a xz c6602 model baseband.