Recommended screen protector - Moto X Q&A

I never usually buy screen protectors for my devices, but since I'll be using this phone for a full two years, I think I should try to prevent as many scratches as possible. Can anyone recommend a good brand of screen protectors? I saw that Motorola makes an official one but it's $15.

I would like to know too didn't see any good ones out yet. I had spiegen for s4 and used indivisible shield before.
Sent from my XT1060 using Tapatalk 4

I too like to use a name brand screen protector like Spigen. I went with the Verizon brand ones off of a recommendation from someone. 3 for $12, they're decent enough as a stopgap until bigger companies put theirs out. Of course, since Moto X is the same for all carriers, you can still order them even if not Verizon.

Halo. Look them up on Amazon. Feels just like glass

had invisashield but its cut horribly, testing the skinomi so far so good cheap/effective/cut perfectly
Sent from my XT1058 using XDA Premium 4 mobile app

Grabbed the Skinomi (at...1 cent? + shipping it was a no brainer!) but seems to pick up pocket lint (after having been on for 24 hours+), which is a problem I've never had before with any other screen protector. Also has some...I don't want to say bubbles, because they're not, but..ripples? ... near the bottom, which are noticeable when the screen is off. That said, the touch is just fine and besides those little issues at the bottom, it looks decent.
Have a few others to try that'll by here early next week.

I am waiting to find a tempered glass protector, I like how much more original it feels plus its much stronger than a sheet of plastic

Ordered the i-blason screen protectors and they should be in tomorrow, I'll give my take on em once I get them.
http://www.amazon.com/gp/aw/d/B00E0...040_30332190_pe_175190_21431760_M3T1_ST1_dp_1

Ordered and received my Halo protectors from Amazon. They are awful, I wouldn't recommend them to anyone. The cut was terrible, and none of the 3 worked out. They felt like they were almost too long as well, having lift at either the top or bottom without a way to make it go away. Gonna get some from VZW as I hear they are good.

I only use halo. Mine is cut and fits perfect. Clarity is good and its feels just like the glass does

Just got my I-Blason screen protectors in. Took me all 3 just to get one without bubbles but the screen protector feels good and is very clear. Cut is a little small though so you gotta perfectly center the screen protector. Also for the top where the speaker and front camera is they just cut out a whole section instead of just the holes for the two.

I don't like wet installs (Zagg, and I think Skinomi is one too). I've used them in the past and have always encountered streaks despite drying, cloudy screens, or the dreaded orange peel (looking at you, Zagg).
I much prefer dry installs. The Verizon protectors are actually really good, surprisingly. Just turn on the hot shower for a few minutes, let it steam up, then install. Quite easy. The screen isn't clouded at all and still feels smooth as glass.

I love my Zagg HD. When/if they come out with a Zagg Extreme I will be buying one of those.
Sent from my XT1060 using xda app-developers app

Any tempered glass yet ?
Sent from my Moto X

Yazzinit said:
I don't like wet installs (Zagg, and I think Skinomi is one too). I've used them in the past and have always encountered streaks despite drying, cloudy screens, or the dreaded orange peel (looking at you, Zagg).
I much prefer dry installs. The Verizon protectors are actually really good, surprisingly. Just turn on the hot shower for a few minutes, let it steam up, then install. Quite easy. The screen isn't clouded at all and still feels smooth as glass.
Click to expand...
Click to collapse
I have never heard of this "hot shower steam up" method. Can anyone elaborate on why I would do that?

thepolishguy said:
I have never heard of this "hot shower steam up" method. Can anyone elaborate on why I would do that?
Click to expand...
Click to collapse
Sure. Have you ever personally tried installing a dry protector say, in your room and you keep getting a few specs of dust under it? Well if you haven't, that's what happens lol. Really annoying, you get the protector down and that 1 spec flies in and you didn't see it, now you have to remove the film and try again, and some are impossible to get the dust off of the sticky side.
In the shower, you run a hot shower 10 minutes, then turn it off. Leave the door open just a small crack. Apparently, the steam causes the dust to rise with it, or fall, whatever the science is lol. Makes for no dust in the air to fall on your screen and allows for installing a dry protector really easy. Wipe with a microfiber cloth and install right there.

Yazzinit said:
Sure. Have you ever personally tried installing a dry protector say, in your room and you keep getting a few specs of dust under it? Well if you haven't, that's what happens lol. Really annoying, you get the protector down and that 1 spec flies in and you didn't see it, now you have to remove the film and try again, and some are impossible to get the dust off of the sticky side.
In the shower, you run a hot shower 10 minutes, then turn it off. Leave the door open just a small crack. Apparently, the steam causes the dust to rise with it, or fall, whatever the science is lol. Makes for no dust in the air to fall on your screen and allows for installing a dry protector really easy. Wipe with a microfiber cloth and install right there.
Click to expand...
Click to collapse
Wow! I definitely will try this next time bc I always get dust under mine. Thanks.

Yazzinit said:
Sure. Have you ever personally tried installing a dry protector say, in your room and you keep getting a few specs of dust under it? Well if you haven't, that's what happens lol. Really annoying, you get the protector down and that 1 spec flies in and you didn't see it, now you have to remove the film and try again, and some are impossible to get the dust off of the sticky side.
In the shower, you run a hot shower 10 minutes, then turn it off. Leave the door open just a small crack. Apparently, the steam causes the dust to rise with it, or fall, whatever the science is lol. Makes for no dust in the air to fall on your screen and allows for installing a dry protector really easy. Wipe with a microfiber cloth and install right there.
Click to expand...
Click to collapse
Just to clarify: Do not actually have your phone in the shower, just in the room with the shower.
Anyone had any experience with either of these two screen protector brands?
http://www.amazon.com/gp/product/B00E5QKHOY/ref=ox_sc_act_title_2?ie=UTF8&psc=1&smid=A3LQSX85N730QN
http://www.amazon.com/IQ-Shield-LIQ...7061&sr=8-13&keywords=moto+x+screen+protector

I just ordered a pack of five from amazon. Were cheap but I'm sure I'll get at least one that works. I have tried Zagg and Armor Suit and hated them both. Went naked for awhile on my S3 and just had one tiny scratch. I work around metal and grinding dust all day and only had that one scratch. Never put one on my S4 but only had it a few days. If you have to keep the phone for two years, then a screen protector maybe good for a while IMO.
Sent from my Moto X

FesterTOR said:
I just ordered a pack of five from amazon. Were cheap but I'm sure I'll get at least one that works. I have tried Zagg and Armor Suit and hated them both. Went naked for awhile on my S3 and just had one tiny scratch. I work around metal and grinding dust all day and only had that one scratch. Never put one on my S4 but only had it a few days. If you have to keep the phone for two years, then a screen protector maybe good for a while IMO.
Sent from my Moto X
Click to expand...
Click to collapse
What did you hate about Zagg and Armor Suit?

Related

Wrapsol Ultra: Dry v. Wet Application

Hey,
I just got got a Nexus S (upgrade from Nexus One w00t! ) and I'm really interested in getting a skin for it. I'm looking specifically at buying a Wrapsol one since I've read that it doesn't have the orange peel effect. I'm just confused over the "ultra protective film" (UPF) and the "original scratch protection" (OSP) that they're selling. I know that the UPF is a dry application and is $30 while the OSP is $25. I've put on many screen protectors in my life before but this is gonna be my first entry into the world of skins. What's the main difference between a dry and wet application protector? What is the better choice? Thanks for your help!
The only difference between wet and dry applicator is pretty much just the method of putting it on. Some people are not comfortable with spraying liquid on their phone so dry applications may appeal to them. The problem I see with this is that unless you are super pro like the guy in the video, you're going to have a frustrating time applying a dry protection on a curvy device like the nexus s. You pretty much have one shot at aligning everything. With a wet application, you can moisten the adhesive and actually slide the film around to align the curves perfectly and slowly work your way through.
I'm not sure about the difference in texture. I've seen some degree of orange peel in all wet applications with zagg being the worst. I'm not sure if wrapsol is orange peel free either due to the nature of the scratch resistant material used to make these film. I believe they use polyurethane.
Sent from my Nexus S using XDA App
I purchased a wrapsol protector for my s and honestly I regretted it the second I put it on. They said it stretches to fit the entire screen but it didn't and it doesn't have a hole for the front facing camera so images are blurry. I'm glad they have a 30 day money back return period cause this is going back as soon as my sgp protector comes.
peeturr said:
The only difference between wet and dry applicator is pretty much just the method of putting it on. Some people are not comfortable with spraying liquid on their phone so dry applications may appeal to them. The problem I see with this is that unless you are super pro like the guy in the video, you're going to have a frustrating time applying a dry protection on a curvy device like the nexus s. You pretty much have one shot at aligning everything. With a wet application, you can moisten the adhesive and actually slide the film around to align the curves perfectly and slowly work your way through.
I'm not sure about the difference in texture. I've seen some degree of orange peel in all wet applications with zagg being the worst. I'm not sure if wrapsol is orange peel free either due to the nature of the scratch resistant material used to make these film. I believe they use polyurethane.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Thanks for the insightful response! One of the things that has scared me away from things like Zagg and other wet application skins is the fact that after a couple of days, weeks, or months, the skin starts to peel off off the corners. Is that still a problem with skins today? (I saw the peeling off the corners a couple of years ago from my friends' blackberries.) Or is that more of the user's fault? I heard that you should ceram-wrap the devise completely also while it's drying so that everything sticks. Is that true? Is there an effective way of applying the skin so that they don't peel off by themselves off corners over time?
myboygino said:
I purchased a wrapsol protector for my s and honestly I regretted it the second I put it on. They said it stretches to fit the entire screen but it didn't and it doesn't have a hole for the front facing camera so images are blurry. I'm glad they have a 30 day money back return period cause this is going back as soon as my sgp protector comes.
Click to expand...
Click to collapse
Thanks for letting me know about the screen protector! I'm already planning on using a Clarivue screen protector. I'm more curious about the back and side protection itself. How were they? Did they have the orange peel effect? How did they feel like? Did you use the wet or dry one? How easy was it to apply? Lastly, did the skin ever start peeling off by itself?
Again, thanks for all of y'all's responses!
I personally use ghost armor and haven't experienced any peeling over a month now. The installation is crucial and patience is key. I wouldn't go so far as to ceram wrap the device. Just make sure you press on all edges and curves for 15 seconds or so once it begins to adhere to make sure it sticks permanently. Another tip is to lightly heat those areas with a hair dryer. It is very important that you keep your hands free, work in a lint free area, and let it dry for 24 hours. Don't put in your pocket for a day or two. The reason is because if dust accumulates on any part of the edge, it will lose adhesive there and make it prone to lifting or peeling. If you can get past the drying stage, then you shouldn't experience any peeling unless forced.
Sent from my Nexus S using XDA App
peeturr said:
I personally use ghost armor and haven't experienced any peeling over a month now. The installation is crucial and patience is key. I wouldn't go so far as to ceram wrap the device. Just make sure you press on all edges and curves for 15 seconds or so once it begins to adhere to make sure it sticks permanently. Another tip is to lightly heat those areas with a hair dryer. It is very important that you keep your hands free, work in a lint free area, and let it dry for 24 hours. Don't put in your pocket for a day or two. The reason is because if dust accumulates on any part of the edge, it will lose adhesive there and make it prone to lifting or peeling. If you can get past the drying stage, then you shouldn't experience any peeling unless forced.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
Thanks! I'll definitely do what you suggested!
Well, I ended up ordering the Wrapsol wet application one. I'm just going to be using the back and side protection. I hope this goes well....
I've done both on 2 nexus S I own, I bought wrapsol because I could apply it dry.
However, after my experience with the 1st "dry" application I applied the second on "wet" why? because the end result is much smoother and less detectable.
btw if you are wondering why I need 2 Nexus S'es, one for me and one for the wife.
jdm_cars said:
I've done both on 2 nexus S I own, I bought wrapsol because I could apply it dry.
However, after my experience with the 1st "dry" application I applied the second on "wet" why? because the end result is much smoother and less detectable.
btw if you are wondering why I need 2 Nexus S'es, one for me and one for the wife.
Click to expand...
Click to collapse
Cool, thanks for letting me know! I heard that the wet one is a matte finish. Is that true? Also, what did you think of the screen protector portion of the wet skin?
I actually wet the ultra protective film version, its glossy not matte. Its very thick compared to the Zagg Ive used in the past, someone said it was made of polyurethane.
so far so good I like the way it looks on the screen portion with a lot less orange peel than the Zagg.

Nexus 7 with Skinomi

Dear All,
Did anyone purchase and install a Skinomi screen protector on their Nexus 7 yet? What is the general opinion on the Skinomi Techskin screen protector? Your comments are highly regarded as I'm thinking which wet screen protector to purchase for my Nexus 7.
Thanks.
I personally do not like Skinomi. they damage and bruise easily in my opinion. For the price you pay the quality degrades quick. Bruising occurs more frequently in wet screen protectors I buy.
My skinomi just arrived today and best buy installed it perfectly for free. I'm letting it sit for a day until I use it. I'll keep you updated.
Sent from my Galaxy Nexus using Tapatalk 2
blackjaguar25 said:
My skinomi just arrived today and best buy installed it perfectly for free. I'm letting it sit for a day until I use it. I'll keep you updated.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Got pictures?
I installed the carbon-fiber one on my N7; first time installing a skin type cover and wet screen protector.
Getting everything lined up was a pain for the skin itself. Had to pull it up and recenter several times, and still didn't get it perfect as I had hoped.
You use a heat gun/hairdryer to "seal" it to the device, so it doesn't peel off after you've installed it.
I don't worry about sitting my N7 down on tables/chairs now, as there's no chance to accidentally scratch the back.
The screen protector went on without an issue, just take your time and keep your fingertips wet with solution. Watch their instructional youtube videos before trying.
The resilience/self healing of the screen protector seems poor. Scrape your fingernail into it, and the mark is there forever, but it's only noticeable when the screen is off.
The protector finger/slide feel is better than dry protectors I've used, but it's not like naked glass.
The viewing quality of the screen doesn't seem impaired at all by the protector. No weird off-angle reflection or rainbow effects, or texture while the screen is on.
IMO it works, but is overpriced for what you get.
Still waiting on my Skinomi Carbon with Protector...how long did it take for you? How is the 'gripiness' of the carbon? I like the stock rubbery feel and don't want to drop it.
Thanks
RF
my skinomi should arrive any day now. will post review n pic sometime this weekend i suppose.
and remember, code get25 will get u 25% off. $20 for both nexus and RAZR protector including shipping n tax? i dig it.
I let mine sit for about 30 hours and then took a look at it. The bottom right corner is BARELY too long and hangs over the edge a little bit. Everywhere else fits perfectly, so I know it's a problem with the protector. It goes to the edge everywhere else. I'll power it on in the morning. $12 with one day shipping with Amazon Prime and I think it's worth it. I put my TPU case on it and don't notice the corner. I'll let you know if it peels back.
Sent from my Galaxy Nexus using Tapatalk 2
Ronaldo Forenucci said:
Still waiting on my Skinomi Carbon with Protector...how long did it take for you? How is the 'gripiness' of the carbon? I like the stock rubbery feel and don't want to drop it.
Thanks
RF
Click to expand...
Click to collapse
Gripness is poor compared to the glorious naked back of the N7, which is the best I've felt on a tablet. Slippery even though it's textured. Disappointing, but seems protective against surface scratches.
Took probably 45 mins to install skin and screen protector.
Sent from my Nexus 7 using xda app-developers app
The edges haven't peeled up anymore. Screen is clear and looks good. However, after using the Zagg on my Galaxy Nexus, the Skinomi on my nexus 7 is like using flypaper. I HATE the feel of it. I'm sure it'll improve over time, but it's not even close to the quality of my Zagg. If I had to choose again, I'd choose Zagg.
Sent from my Nexus 7 using Tapatalk 2
Installed Skimoni on my Nexus 7 2 weeks ago, love it, easy to install, screen was not responsive for a few hours after installation but now everything is ok.
I've been using a Skinomi for a couple weeks and I think it's good. I decided to go with just a screen protector rather than a case. Most of the cases I've seen make the N7 too thick in my opinion.
The screen protector went on easily enough. I did get a bit of dust under the screen protector near the right edge that I notice every time I look at my N7. I agree that the screen protector takes away from the great feel of the naked screen but since the screen isn't gorilla glass, I think it needs something to protect it.
Sent from my Nexus 7 using xda premium
Keep them coming..
Dear All,
I knew there would be N7 owners that installed Skinomi screen protectors I just had to ask...Now, we need pics to see your results. I ordered mine on July 28 and still haven't got it yet. I'm getting it shipped to Canada but it should of arrived by now. Keep the comments rolling in... :good:
fcng said:
Dear All,
I knew there would be N7 owners that installed Skinomi screen protectors I just had to ask...Now, we need pics to see your results. I ordered mine on July 28 and still haven't got it yet. I'm getting it shipped to Canada but it should of arrived by now. Keep the comments rolling in... :good:
Click to expand...
Click to collapse
just installed it last night. this morning it looks glorious.
First thoughts:
- less than 15 minutes to install. just make sure u follow the video instructions EXACTLY. when it asks u to put water on ur hand, u ask, how much? when it want u to pick up the protector, u ask, how slow should i move? For a first time user with wet installation, that was a walk in a park. clean device. spray fingers. spray protector. peel. spray protector again. stick. slide. remove bubble. pat to dry.
- there are smudges and micro bubbles, but by morning they're all gone. don't worry.
- the smoothness feeling is different, the skinomi feels a little more "sticky", especially if u put pressure. but if ur a light-touch user, it's just as smooth.
- under reflection, i can almost see why it's called "orange peel texture", but i could not feel it in my hand. a bit "sticky" but nowhere near "rough".
- it's somewhat fingerprint resistant, but not 100% smudge-resistant.
- the skin feels a bit "soft", so scratching it with ur nail or keys will leave a mark, but u can't feel that mark at all and it seems to disappear after awhile.
- clarity is top-notch. i could not find any difference in color or brightness when i test it with a couple 1080p movies (Lorax for color, Wall-E for darker environment)
- size/cut quality, however, is the only "not perfect" score. it's a tiny bit smaller than my nexus (about 1, maybe 1.5mm at most) so the edges where the screen protector ends, and fairly *thick*, so it is a bit "sharp" (u can feel this when u slide down the notification from outside the protector into the screen) and it does attract dust in the corners.
overall, very happy. not incredibly happy or anything (abit thick and soft and sticky from what i expected), but it's clear, protects, and barely noticeable.
will take pic later...
I give it a 7/10. I got the Black Carbon kit. Skinomi is the only mfg that I can find, that also covers the bottom part of the silver bezel. I wish they included 4 more strips for the top half of the bezel. The Carbon back could probably be about 1mm longer in length. If you line up the speaker cut out perfectly (equal distance all around the perimeter of the speaker), the bottom microphone hole gets covered. I had to "cheat" the skin down so the edge of the speaker cut out on top, was right at the edge of the speaker. That left about 1mm of space at the bottom of the speaker where you can see the dimpled rubber stock back. This also leaves about 1mm of space on the top, near the Micro USB, where you can see the stock back. But this does line all the mic holes up and it is flush at the bottom. You *really* have to look hard to see this, so 9/10. The side pieces look fine, although around the POGO Plug takes some fiddling.
The screen protector it a "soft type" (I call the rubbery/vinyl type soft, and the plastic type hard). I have a Seidio "hard" type on my Nexus S, and love it. It doesn't have a mark on it after 2 years and looks like glass with the screen off and light reflected off it. This screen protector has very slight "orange Peel" and also what look like "crease marks" all over it. You can only see these with the screen off and looking at reflected light, with the screen on, it is perfect. It does scuff. I like that it had actual cut outs for both the camera and flash. Install was fine (steamy bathroom and latex gloves), no bubbles and imperfections do disappear after 24 hours and fit is perfect. 8/10.
These are all niggles, I'll be leaving it on.
After having mine on to about a week, my screen has started losing responsiveness until I reboot. Probably a rogue app, but it makes me wonder.
Sent from my Galaxy Nexus using Tapatalk 2
I've had one on for a few weeks now. I have to say I'm not a huge fan. I would describe the texture as gummy and it has made my tablet less pleasant to use. I'm probably going to switch it out for the default screen protector that comes with otterbox I intend to purchase. I've had a much better experience with those on a couple of other devices.
gerbal said:
I've had one on for a few weeks now. I have to say I'm not a huge fan. I would describe the texture as gummy and it has made my tablet less pleasant to use. I'm probably going to switch it out for the default screen protector that comes with otterbox I intend to purchase. I've had a much better experience with those on a couple of other devices.
Click to expand...
Click to collapse
i agree. gummy is a better word to describe it. i was going with "soft and sticky" :silly:
but for me it's not overly gummy, and the "gummy-ness" does protect from finger prints and scratches. it does leave a mark but it "heals" up pretty well.
also, just realized that i kind of missed the center abit, so the space on the left is a bit larger than the right, and the bottom right corner kinda lift up abit. completely fine, but being a perfectionist with screen protectors, i feel like i have to redo it.....
anybody can comment on redo-ing a Skinomi?
Ronaldo Forenucci said:
I like that it had actual cut outs for both the camera and flash.
Click to expand...
Click to collapse
Flash??? i didnt kno Nexus7 has flash!
Cant you just contact them for a free replacement if you messed up? I think I read somewhere that they do that.
I know most screen protector manufacturers allow that.
I just ordered a screen protector (no back protection, not a fan of the fake carbon/aluminum stuff) for $12 after shipping. Found a 25% off coupon online, it was "get25" I think.
I've used both dry and wet application type protectors in the past. And yea, the dry ones always feel better, but I still prefer the wet ones because its easier to get a perfect fit.
If you're good any fitting screen protectors perfectly or just dont care that it might be slighhttly off, then go for a dry application one.
I personally cant stand if the edge of the protector isnt parallel to the edge of the screen, or if the spacing on the edges are uneven lol. So I go for wet ones.
yup. just saw FAQ that it's easy to remove, wash, and re-apply. guess that's what i'll be doing when i get home
(maybe this time i'll take pictures... lol)

screen protectors

who's using them? i horribly failed at putting one on today (a free one that came with my case..looked crappy though with tons of bubbles between the 3 layers before i even put it on lol) but yeah, i'm real bad at putting protectors on tablets because it kept coming out crooked because of that damn home button etc.
anyway, i've got a pack of 5 coming in the mail sometime this week, and i'm wondering if i should even bother attempting again, or just use it naked. it feels so good without a protector, but i'm afraid of scratching the screen. i've been using screen protectors since 2011 with my HTC Rezound, so idk what to do. i always end up with tiny scratches on my protectors, so i'm thinking i'll end up scratching the screen..
jayochs said:
who's using them? i horribly failed at putting one on today (a free one that came with my case..looked crappy though with tons of bubbles between the 3 layers before i even put it on lol) but yeah, i'm real bad at putting protectors on tablets because it kept coming out crooked because of that damn home button etc.
anyway, i've got a pack of 5 coming in the mail sometime this week, and i'm wondering if i should even bother attempting again, or just use it naked. it feels so good without a protector, but i'm afraid of scratching the screen. i've been using screen protectors since 2011 with my HTC Rezound, so idk what to do. i always end up with tiny scratches on my protectors, so i'm thinking i'll end up scratching the screen..
Click to expand...
Click to collapse
I was thinking about picking up some myself. Which ones did you order?
Put one on but spend at least 10 bucks for a decent one. Illunisheild thats the one I got from amazon for the 8.4 its pretty good.
I got these:
http://www.ebay.com/itm/161361388722?_trksid=p2060778.m2749.l2649&ssPageName=STRK:MEBIDX:IT
Sent from my SM-T700 using Tapatalk
I always put screen protectors on all of my phones and tablets. I've just put one on my Tab S 8.4, had a few dusts under the protector. usually I would rip it out and try again, but I thought not today! Because fortunately the screen protector came with some stickers to help get rid of the dust.
Happy to say it is dust and bubble free now. Although it is not one of those fancy screen protectors, just a cheap one called elec shield.
invisible shield is the best.
will6316 said:
Put one on but spend at least 10 bucks for a decent one. Illunisheild thats the one I got from amazon for the 8.4 its pretty good.
Click to expand...
Click to collapse
I ordered these from Amazon as well. Should be in today.
I'll give it a try and see if I like it. Probably gonna feel weird at first though.
I too would like to buy one. I asked ismooth on twitter but they are not gonna make one for the tab S (I have one for my note 3 and it's just perfect).
I think I'm gonna go Invisibleshield. It's not cheap but I've only heard good things about their products :good:
anyone have any tricks as to how to get it on nice and straight on the tablets? I'm bad at tablets for protectors but decent at phones. I saw one idea where you place it down on the screen then tape the sides like a hinge, then you flip it over, peel it off, and just flip it back and lay it on the tablet and it should line up perfectly. wonder if it works.
Sent from my VS980 4G using Tapatalk
jayochs said:
anyone have any tricks as to how to get it on nice and straight on the tablets? I'm bad at tablets for protectors but decent at phones. I saw one idea where you place it down on the screen then tape the sides like a hinge, then you flip it over, peel it off, and just flip it back and lay it on the tablet and it should line up perfectly. wonder if it works.
Sent from my VS980 4G using Tapatalk
Click to expand...
Click to collapse
That's exactly what I did. Works perfectly. The screen protector I bought even came with the positioning tape and stickers for dust removal. But you can just use Scotch tapes.
Mr shield
I have used many different screen protector products. I like spigen and I just installed the Mr shield ones. The are two finishes. Clear and matte. The matte finish cuts a lot of glare but impacts out door viewing. I now have the clear and love it. No bubbles. I have several videos on screen protectors that show tips on install . Herr is my initial install http://youtu.be/NHzarYjTtzE
kliu888 said:
That's exactly what I did. Works perfectly. The screen protector I bought even came with the positioning tape and stickers for dust removal. But you can just use Scotch tapes.
Click to expand...
Click to collapse
sweet! i'll give it a try when they come in
Putting on a screen protector reminds one of what a dirty filthy planet we live on. There is dust EVERYWHERE. One tried and true method is to run a hot shower in your bathroom for 10 minutes with the door closed until the room steams up. This pulls all of the airborne dust from the air. Turn the shower off, and use the tape hinge method to apply the protector.
Despite your best efforts you are likely to STILL get that ONE DAMNED PIECE OF DUST FROM HELL that manages to somehow get on the screen. If that happens, DO NOT TRY TO PEEL THE PROTECTOR UP FROM THE EDGE because if you bend it at all it will never seat again properly and you'll have a bubble that won't go away. Use tape to stick to the outside near the corner and gently lift that way, then use another piece of tape to grab the dust particle.
One negative of putting a screen protector on a tablet this size. Unless the protector is tempered glass, you are likely to feel a bit of drag as you swipe the screen - no plastic will ever feel as smooth as glass - and because the area is larger than your phone, you'll notice the resistance more. Also, unless the screen protector has an oleophobic coating, it will be harder to clean greasy fingerprints of it than from glass. Last point, most screen protectors are actually softer than glass so you are likely to get it pretty scratched up which, while saving your glass, leaves you with a scratched up viewing surface you have to look at. The alternative is to buy a screen protector with a hardness of 9 or above with an oleophobic coating but those tend to be a lot more expensive.
Get a pack of 3 or more if you can. You WILL screw it up a few times and you WILL want to replace them occasionally as they get scratched up pretty easily depending upon how anal you are about such things.
good advice, thanks! but do you guys think this thing needs one in the end? I know gorilla glass is pretty soft and scratches easily so idk..
Sent from my SM-T700 using Tapatalk
jayochs said:
good advice, thanks! but do you guys think this thing needs one in the end? I know gorilla glass is pretty soft and scratches easily so idk..
Sent from my SM-T700 using Tapatalk
Click to expand...
Click to collapse
I don't believe this tablet has Gorilla Glass, at least I don't believe the specs say so (could be wrong?). So yes, it could scratch easily. You can try and be careful but all takes is a tiny bit of grit on your finger, stylus or wiping cloth and you are done, Gorilla Glass or no.
Actually you know, skip the steamy bathroom. Just do it in a dry room but use a strip of masking tape and screen until every bit of dust is gone. Also remember, after you place the protector on the screen with the taped hinge, make sure you clean the screen again because it will get dust on it from the bottom of the protector.
Mr Shield makes very good inexpensive protectors.
http://www.amazon.com/gp/product/B00KATOH2S/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
perfect install on first one using the painters tape technique.
heres how
https://www.youtube.com/watch?v=PMPqDwVZzzM
Why put a cheap screen protector on a premium device like the tab s. The best deserves the best or better. my screen protector cost 2 for 13 and a tempered glass on is on its way for $18. You cant even tell there on when installed correct.
will6316 said:
Why put a cheap screen protector on a premium device like the tab s. The best deserves the best or better. my screen protector cost 2 for 13 and a tempered glass on is on its way for $18. You cant even tell there on when installed correct.
Click to expand...
Click to collapse
Be very careful with the tempered glass protector. NEVER left it up by the edges - use tape. They bend VERY easily and once bent will never lay down flat properly again. Every tempered glass protector I've ever used developed sealing problems along the edges, especially near the home button. YMMV but that is my experience.
There aren't good selection of screen protectors in the UK. Looked in Amazon, Ebay, Google, nothing with quality. So I only got the Elec shield.
I'd get tempered glass if I could, but as long as I screen is protected for now, then I'm happy enough.

Does Zagg still make a wet application protector?

I have always used invisible shield on my devices. One reason was the wet application method their protectors use. I always have issues with dust, no matter what I do, but the application solution seems to rinse the dust out with it when you install the wrap. With a dry install if a single piece of dust lands on the screen on the install you're screwed.
Anyway, does anyone know if any of the Zagg (or other brand) protectors use a wet install?
Sent from my Note 5 via Tapatalk
Because I'm probably taking a dump.
Ghost armor does. Not sure why you would want one though.. way too much friction for something with a stylus.
Goronok said:
Ghost armor does. Not sure why you would want one though.. way too much friction for something with a stylus.
Click to expand...
Click to collapse
Would you say I'm ok without a screen protector then? I'm not one to throw my phone in my pocket with my keys or anything. I keep it in a pocket by itself. I would like one of the glass protectors but I've seen way too many bad things about them due to the screen being curved and causing a "halo" effect.
The "original" on their website I think. But that would be badddd with the pen.
Hezzennater said:
The "original" on their website I think. But that would be badddd with the pen.
Click to expand...
Click to collapse
I remember the original being pretty sticky feeling on my old iPhone. I just bought an HDX Defense, but it is a dry install as I referenced above. Its pretty clear and almost as smooth as glass, but I couldn't get it on without any dust. I ALMOST did but one big piece hit the screen just as I was laying it down, and I ruined the protector getting the dust off. I'll be sending in for replacement to try again but I just don't see how I could ever get one of these on without a single piece of dust. When I clean off my phone and watch if for about 5 seconds I get 10-15 little dust particle in that amount of time..... Ugh.
MrStig91 said:
I remember the original being pretty sticky feeling on my old iPhone. I just bought an HDX Defense, but it is a dry install as I referenced above. Its pretty clear and almost as smooth as glass, but I couldn't get it on without any dust. I ALMOST did but one big piece hit the screen just as I was laying it down, and I ruined the protector getting the dust off. I'll be sending in for replacement to try again but I just don't see how I could ever get one of these on without a single piece of dust. When I clean off my phone and watch if for about 5 seconds I get 10-15 little dust particle in that amount of time..... Ugh.
Click to expand...
Click to collapse
I do mine right in the bathroom after a shower. The steam helps keep the dust manageable. Also, use the tape hinge method so you can do it really fast after it's clean.
What is this tape hinge method? Also, I ran a ton of hot water in the bathroom to get the steam really going. It helped but I still got one piece of dust in there. =[ Probably took me about 15 seconds to apply, if I could do it in 3-4 seconds I could probably avoid all the dust.
I got the skinomi skin for my screen and its great. fits perfectly and no dust particles. it is not as smooth as glass or the plasticy screen protector, but I can do everything fine. prefer this over halos and dust around the halos.
MrStig91 said:
What is this tape hinge method? Also, I ran a ton of hot water in the bathroom to get the steam really going. It helped but I still got one piece of dust in there. =[ Probably took me about 15 seconds to apply, if I could do it in 3-4 seconds I could probably avoid all the dust.
Click to expand...
Click to collapse
It's popular for sticking decals on cars n such. Once you place the protector where you want it, make a hinge out of a piece of tape. Fold back the protector, peel off the backing, and use the hinge to put the protector back on in the same place it was taped. Here's a video.
I wouldn't mind having one for the glass back. It would add some nice grip.
Sent from my LG-H811 using Tapatalk
tbh if you just don't abuse the phone you should be fine without a protector. After reading an article about it back when I had a Galaxy S3, I peeled my Zagg protector off and didn't even use one on the Note 3. After 2 years of heavy daily use, the Note 3 looked nearly brand new - only a few extremely light small scratches viewable from certain angles with just the right lighting. I will definitely not be using anything on the Note 5 for that reason.
I have a desk job though, and am generally careful with everything i own, however. My step brother on the other hand... he delivers/installs large home appliances. In the last 3 years he utterly destroyed 2 Galaxy S4's and an iPhone 5 because he doesn't take care of his stuff at all (both S4's had smashed screens, camera lenses etc destroyed through a full Otterbox Defender case).
In any case - I too would strongly advise against a Zagg wet protector on a phone with a stylus. It would basically make the stylus unusable.
If i recall correctly, the reason they discontinued the wet application was people were applying it improperly and causing damage to their phones.
Basically they stopped selling them to cover their butts from lawsuits.

Skinomi Full Wrap review

So I purchased a Skinomi full Techskin kit about $13, to wrap the sides and back of my Note 8. The application of it was pretty simple, there are videos online for it, on how to do it. The only weird thing about applying it is it pretty much doesn't stick at first when you place the solution on it, then as it dries it gets super sticky right away out of the blue. You can be moving it one second, then it just stays and is almost completely stuck on. You need to press down the edges and all and it takes about 45 minutes or less, but just keep revisiting it to press it down more. The back was ok, got some cloudiness (which they say is normal for a day or so) and maybe a couple of slight bubbles but I don't really care, it was mainly to prevent scratches. Attached are the pictures of what it looked like when I got it, and what it is like on the phone. You can feel it for sure, not as smooth as it transitions from one part to the other, but again, I got it to prevent scratches. I did not place the screen protector on it, because I was putting on tempered glass.
In addition you will see tempered glass, which I actually surprisingly feel like its good. No loss of feel at all, it just doesn't go all the way to the edges but the edge features all still work. Its a Luuvvit one, which I bought from amazon for about $11.00
Looks nice. Beats what I have on mine right now. Mine looks like a high 5 year old did it.
Holy crap that was funny!
Sent from my SM-N950U using XDA Free mobile app
I'll actually post some better pictures tomorrow on it. Realized these are not as good as they were taken right after. I'm amazed how unnoticeable it is, really liking this purchase.
I have my skinomi ordered i put it on all my phones. Great protection from dirt and dust getting around case edges etc etc. Keeps them brand new looking
Ok here are some better daytime pictures and bubblesare gone now
And last one
I did mine too with a skinomi full body skin before putting it into my case. I always full body wrap every phone because.....Why not? Dirt ALWAYS makes it's way between a case and the body of a phone. The skin keeps the dirt off and keeps the body like new! The guy at T-Mobile didn't believe I had the S7 Edge for a year until he looked up my account!
Fyi I dropped it on concrete and asphalt literally over a hundred times.
I'm not using the skinomi screen protector though. My Zizo Bolt case came with a Tempered glass protector that seals on the edges, but I've been super impressed and will keep it on until it breaks. Zizo is an awesome company! No sensitivity loss and super clear. Also no rainbow or bubbling. Yes there's a small dot matrix pattern though ( UGH ) but it's not visible at all on the screen while it's on, even in the sunlight.
I had the bolt on my s7 edge too. I love the case and it held up just as good as any otter box defender which I've used on tons of other phones. Like I said, it's been dropped a lot! Lol
Oh and a heads up...... hit it with a hair dryer and let it sit a day before using any tight fitting case or you will peel it up as you put the case on. Been there and done that. Learned my lesson. I LOVE skinomi skins but I equally like the IQ Shield too. Both make good stuff. IQ SHIELD feels a hair less rubbery but both are great!
Sent from my SM-N950U using Tapatalk
---------- Post added at 07:09 PM ---------- Previous post was at 07:08 PM ----------
Kawaisa said:
Looks nice. Beats what I have on mine right now. Mine looks like a high 5 year old did it.
Click to expand...
Click to collapse
Lmao love it !
Sent from my SM-N950U using Tapatalk
I always use skinomi screen protectors. Never got the full wrap since i always use a case.
My s8 plus, I have the skinomi screen protector and a rhionshield crash guard all works great together and the back of the phone doesnt touch so it never got scratched.
Order the same for my note 8. Im waiting for my crash guard to come in. probably at the end of the month, ill be caseless then then
And a tip is to lightly spray the phone. Then lay the protector on and push the bubbles out from the inside to the edge. Then run your fingers up and down the edges for a few minutes and it should stick. Then i let dry for 5mins and then rub everything again.
been doing that since the note 4 edge and has always work.
xile6 said:
I always use skinomi screen protectors. Never got the full wrap since i always use a case.
My s8 plus, I have the skinomi screen protector and a rhionshield crash guard all works great together and the back of the phone doesnt touch so it never got scratched.
Order the same for my note 8. Im waiting for my crash guard to come in. probably at the end of the month, ill be caseless then then
And a tip is to lightly spray the phone. Then lay the protector on and push the bubbles out from the inside to the edge. Then run your fingers up and down the edges for a few minutes and it should stick. Then i let dry for 5mins and then rub everything again.
been doing that since the note 4 edge and has always work.
Click to expand...
Click to collapse
Trust me even with a case, use a full body wrap! It not only keeps dirt off but acts as another cushion for impact even with a good case. They are worth the money for our nearly 1000$ device lol
Sent from my SM-N950U using Tapatalk
xile6 said:
I always use skinomi screen protectors. Never got the full wrap since i always use a case.
My s8 plus, I have the skinomi screen protector and a rhionshield crash guard all works great together and the back of the phone doesnt touch so it never got scratched.
Order the same for my note 8. Im waiting for my crash guard to come in. probably at the end of the month, ill be caseless then then
And a tip is to lightly spray the phone. Then lay the protector on and push the bubbles out from the inside to the edge. Then run your fingers up and down the edges for a few minutes and it should stick. Then i let dry for 5mins and then rub everything again.
been doing that since the note 4 edge and has always work.
Click to expand...
Click to collapse
How does the screen protector feel? Just like the back part? Or is it different material?
MACHEK said:
How does the screen protector feel? Just like the back part? Or is it different material?
Click to expand...
Click to collapse
I did a blind test with my wifes phone before (she remove hers from one of her old phones. I believe the s7e)
You can tell which is skinomi and and which is bare. The bare is slicker.
But overall if its very smooth and people wouldnt know it was there. 100% clear and no gel or ruff feels to it. Ive been using them for years and to me there the best.
Also you can get a 2pack for around $7 ship so if one wears out you can just put the other one on.
Kawaisa said:
Looks nice. Beats what I have on mine right now. Mine looks like a high 5 year old did it.
Click to expand...
Click to collapse
You must be my doppleganger, thats the sort of **** I normally do, i always seem to use the pretexts of "temporarily". Cutting pieces of car clear bra and sticking them on my ****. Lol[emoji2] love it
Sent from my SM-T819Y using Tapatalk
SKinomi has been a weird brand for me. It gets decent reviews but sometimes people hate it. I always get Skinomi for all my phones, imported to Korea because they don't sell them here. I love how thick it is, compared to other "films", which means extra protection. I also like how after a while the solution just seems to have some kind of a chemical reaction with the film itself, and makes the film look very glossy and clear like .... actual glass. Once I get a Note 8 again, I will probably put dome glass on the front, and another layer of skinomi on top, and the back will only be protected by Skinomi. I swear by this stuff, it's in a different league from other films.
ca12bon said:
SKinomi has been a weird brand for me. It gets decent reviews but sometimes people hate it. I always get Skinomi for all my phones, imported to Korea because they don't sell them here. I love how thick it is, compared to other "films", which means extra protection. I also like how after a while the solution just seems to have some kind of a chemical reaction with the film itself, and makes the film look very glossy and clear like .... actual glass. Once I get a Note 8 again, I will probably put dome glass on the front, and another layer of skinomi on top, and the back will only be protected by Skinomi. I swear by this stuff, it's in a different league from other films.
Click to expand...
Click to collapse
Does it show the s. Pen marks also can you send me a link where you buy them I'm on Thailand Thanks
magichoward said:
Does it show the s. Pen marks also can you send me a link where you buy them I'm on Thailand Thanks
Click to expand...
Click to collapse
Ahh actually, yes it shows the s.Pen marks, so don't put one in the front. For the front, use Glass dome, for the back skinomi. THis is the only one I could find on Amazon: https://www.amazon.com/Galaxy-Prote...sr=8-1&keywords=skinomi+note+8+back+protector

Categories

Resources