Related
Dear Friends,
I wanted to reset the binary and flash counter values...
So I have used Triangle Away App and after downloading the needed files I have clicked on reset binary and got this msg "THIS IS A DANGEROUS OPERATION AND COULD POTENTIALLY BRICK YOUR DEVICE. PROCEED AT YOUR OWN RISK."
I continue to the operation and after it device logged into the official logo but it stuck there only on official logo...
"Samsung Galaxy Note GT - N7000"
Nothing happening,.... What to do? Afraid to touch the device, I may brick it..
what to do...?? Please I need your help...
It seems like you didn't thnik of my advice which i gave you. hmmm
BTW if its not booting then you have to get into download mode and flash a prerooted GB rom.
sahilarora2003 said:
It seems like you didn't thnik of my advice which i gave you. hmmm
BTW if its not booting then you have to get into download mode and flash a prerooted GB rom.
Click to expand...
Click to collapse
sorry sir,
I took your advice seriously but wanted to reset the counters...
Sorry, I am very much sorry... i really mean it...
sahilarora2003 said:
It seems like you didn't thnik of my advice which i gave you. hmmm
BTW if its not booting then you have to get into download mode and flash a prerooted GB rom.
Click to expand...
Click to collapse
Would it be fine if i flash back to the Prerooted GB ROm??
I am little worried to this operation...
Please sir...
Flashing GB, just give you device back to boot normaly, Doesn't cause reset flash counter.
Wipe full after flashing GB ROM, then use Jig to reset counter OR again flash ICS and use triangle away.
Now you dont think you are paying for what you are doing?
I have marked since you got root, you are playing with flashing everday !
Sometimes that happens. Try it again when you fixed it.
Sent from my GT-N7000 using xda premium
dr.ketan said:
Flashing GB, just give you device back to boot normaly, Doesn't cause reset flash counter.
Wipe full after flashing GB ROM, then use Jig to reset counter OR again flash ICS and use triangle away.
Now you dont think you are paying for what you are doing?
I have marked since you got root, you are playing with flashing everday !
Click to expand...
Click to collapse
Sorry Ketan sir,
As I have recovered from one problem, stuck to another as you said I need to reset my counter, I stated following the thread but now I am serious, not going to flash anything above.
I just need to reset my counters. I don't know about "Jit".
I am on ICS LR6 4.04.
Please provide me the exact procedure...
I really sorry for my childish actions...
Sent from my GT-N7000 using xda premium
PierreTech said:
Sometimes that happens. Try it again when you fixed it.
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
does it happen if we press power button to boot ?
TA specifically warns NOT to use power button during reset and reboot !
krishkamlesh said:
Sorry Ketan sir,
As I have recovered from one problem, stuck to another as you said I need to reset my counter, I stated following the thread but now I am serious, not going to flash anything above.
I just need to reset my counters. I don't know about "Jit".
I am on ICS LR6 4.04.
Please provide me the exact procedure...
I really sorry for my childish actions...
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1354888
Here is the procedure.
You need a JIG to follow the above procedure.
PS :- Only play if you know how can you recover if something went wrong. If you don't know then stay safe, sit on you chair and read the instructions first. Its just a advice.
sahilarora2003 said:
http://forum.xda-developers.com/showthread.php?t=1354888
Here is the procedure.
You need a JIG to follow the above procedure.
PS :- Only play if you know how can you recover if something went wrong. If you don't know then stay safe, sit on you chair and read the instructions first. Its just a advice.
Click to expand...
Click to collapse
He don't have JIG, so option for him is to flash ICS and reset with Triangle Away.
+1 (Agree what you advised.)
dr.ketan said:
He don't have JIG, so option for him is to flash ICS and reset with Triangle Away.
+1 (Agree what you advised.)
Click to expand...
Click to collapse
If I will again use that app Triangle Away and again if I will stuck to the boot screen, what is advisable??
Does it may harm to my device??
I hands up from any type of risk... I don't want to go in more tension...
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:
Then safe way is to purchase JIG from Ebay.
Meantime continu using device with raised count.
dr.ketan said:
Then safe way is to purchase JIG from Ebay.
Meantime continu using device with raised count.
Click to expand...
Click to collapse
+1, you may brick your device with improper use of triangle away, by the way did you match the binary count and firmware type in download mode and in triangle away app before proceeding with reset?
jeetu1981 said:
+1, you may brick your device with improper use of triangle away, by the way did you match the binary count and firmware type in download mode and in triangle away app before proceeding with reset?
Click to expand...
Click to collapse
No there was just a suggestion that you can see the binary by pressing Vol + home+ power...
I think I made a mistake...:banghead:
Sent from my GT-N7000 using xda premium
krishkamlesh said:
No there was just a suggestion that you can see the binary by pressing Vol + home+ power...
I think I made a mistake...:banghead:
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
That's fine now, you have already made the mistake. I have used TA 4-5 times on stock ICS and it never shows the stats in app main screen, but it shows it in the special boot mode. I have used it on PA once and the flash stats were available on main screen only.
Wait for my PM.
jeetu1981 said:
That's fine now, you have already made the mistake. I have used TA 4-5 times on stock ICS and it never shows the stats in app main screen, but it shows it in the special boot mode. I have used it on PA once and the flash stats were available on main screen only.
Wait for my PM.
Click to expand...
Click to collapse
Hey, can I do the followinga???
1. Flash stock GB rom using PC odin,
2. root it and install cwm recovery
3. Flash CM9 or cm9 based custom rom using abyss GB kernel.
4. Use triangle away app to reset counter.
I can then flash rom or can again flash stock GB and return to ICS (via odin) and can root it again using new method for root, new method does not raise counter...
I have received such method....
Will it work... What do you think so???
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:
krishkamlesh said:
Hey, can I do the followinga???
1. Flash stock GB rom using PC odin,
2. root it and install cwm recovery
3. Flash CM9 or cm9 based custom rom using abyss GB kernel.
4. Use triangle away app to reset counter.
I can then flash rom or can again flash stock GB and return to ICS (via odin) and can root it again using new method for root, new method does not raise counter...
I have received such method....
Will it work... What do you think so???
|Th£ G®£@t [email protected]nt [email protected]|@x¥ |\|0t€|:banghead:
Click to expand...
Click to collapse
It should work and is working for most of the people here , but make sure to match stats in app and download mode this time, DO NOT reset counter if you are not sure and wait for JIG as said above.
krishkamlesh said:
Hey, can I do the followinga???
1. Flash stock GB rom using PC odin,
2. root it and install cwm recovery
3. Flash CM9 or cm9 based custom rom using abyss GB kernel.
4. Use triangle away app to reset counter.
I can then flash rom or can again flash stock GB and return to ICS (via odin) and can root it again using new method for root, new method does not raise counter...
I have received such method....
Will it work... What do you think so???
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:
Click to expand...
Click to collapse
I really can't understand why you playing with your note if you don't know how to do it properly ?
Almost everyday you flash a new rom, then flash something hilarious which put you in trouble and you came back here for a solution ? Why you can't be with a rom for some days. Let it run for some days, take the juice out.
BTW the steps mentioned above is to be correct :-
When you have GB rooted you don't need to use Abyss. Just go to recovery and flash Rom+Gapps
Wipe Cache/Dalvik/Data(Factory Reset)
Reboot System
sahilarora2003 said:
I really can't understand why you playing with your note if you don't know how to do it properly ?
Almost everyday you flash a new rom, then flash something hilarious which put you in trouble and you came back here for a solution ? Why you can't be with a rom for some days. Let it run for some days, take the juice out.
BTW the steps mentioned above is to be correct :-
When you have GB rooted you don't need to use Abyss. Just go to recovery and flash Rom+Gapps
Wipe Cache/Dalvik/Data(Factory Reset)
Reboot System
Click to expand...
Click to collapse
I take your advice, I will not flash anything until I will get JIG in my hands...
Thanks bro...:thumbup:
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:
krishkamlesh said:
I take your advice, I will not flash anything until I will get JIG in my hands...
Thanks bro...:thumbup:
|Th£ G®£@t [email protected] [email protected]|@x¥ |\|0t€|:banghead:
Click to expand...
Click to collapse
sahil sir is really suggesting you a good idea as you have a single sgn.so dont dare to play with it dude.
i am not a master but i know one thing when i flash any rom(stock or custom) is to go back to dr.ketan's pre-rooted gb rom.so i would suggest not you only,to everyone who is flashing the first time is that----please go back to pre-rooted gb rom through pc odin.then try to do whatever you want to......
and a big question is there how would you know that your counter is raised??????have you ever flashed any rom with a short way???if it is then your counter is raised.if not then your counter must be zero.
and its good to be on stock rom as there are mods for it and even a very good call recording.what do you want more than this?????
Hope to not disturb, today my Note arrived, so right now i got 4 hours with it. Impressions?!? You all know, is a great device.
So, since this morning i start reading and reading, but are alot of infos here, i lose some and i become confuse, so i will need some help in my order questions.
My build number is GINGERBREAD.XXLA6 (i understand users with it can easily brick the device), so here all my questions:
PS: Please post links too:
1- first step is to root and install cwm (how and link please), or i need to flash a new kernel to be sure my device will never be bricked (how and link please)?
2- after i flash custom kernel and install a new rom, i can make wipe all from custom recovery? After that danger situationto brick it will be forever gone?
3- i would like to unlock the sim network, it is working and it is safe?
4- i know about warranty, but i suppose i can allways go back to stock (i need stock kernel too or only rom?)
Dont know what to ask more, users who will read and write, please, write ALL STEPS, 1by1, from first to last, what i need to do, this phone was a big effort for me to buy it, without any jokes.
Thanks in advance!
darktyroll said:
Hope to not disturb, today my Note arrived, so right now i got 4 hours with it. Impressions?!? You all know, is a great device.
So, since this morning i start reading and reading, but are alot of infos here, i lose some and i become confuse, so i will need some help in my order questions.
My build number is GINGERBREAD.XXLA6 (i understand users with it can easily brick the device), so here all my questions:
PS: Please post links too:
1- first step is to root and install cwm (how and link please), or i need to flash a new kernel to be sure my device will never be bricked (how and link please)?
2- after i flash custom kernel and install a new rom, i can make wipe all from custom recovery? After that danger situationto brick it will be forever gone?
3- i would like to unlock the sim network, it is working and it is safe?
4- i know about warranty, but i suppose i can allways go back to stock (i need stock kernel too or only rom?)
Dont know what to ask more, users who will read and write, please, write ALL STEPS, 1by1, from first to last, what i need to do, this phone was a big effort for me to buy it, without any jokes.
Thanks in advance!
Click to expand...
Click to collapse
As long as you are on GB kernel, you are safe to wipe.
1. Check my sig. for excellent rooting guide by Dr.Ketan (post #3 for LA6), it will help in installing cwmr too.
2. You can wipe on any of the safe custom ICS kernels (if you flash custom ICS rom) just do not wipe on stock ICS kernels.
3. check galaxy_S unlock in play store to unlock, I dont think it is unsafe to do it (except some carrier terms, may be)
4. Once you flash stock firmware you will be back to normal. flashing stock firmware will also change kernel to stock.
I would suggest read a lot before doing anything as flashing custom roms, kernels or modding always include some risk.
jeetu1981 said:
As long as you are on GB kernel, you are safe to wipe.
1. Check my sig. for excellent rooting guide by Dr.Ketan (post #3 for LA6), it will help in installing cwmr too.
2. You can wipe on any of the safe custom ICS kernels (if you flash custom ICS rom) just do not wipe on stock ICS kernels.
3. check galaxy_S unlock in play store to unlock, I dont think it is unsafe to do it (except some carrier terms, may be)
4. Once you flash stock firmware you will be back to normal. flashing stock firmware will also change kernel to stock.
Click to expand...
Click to collapse
Thanks for the quick reply, and fluidity.
I will write back is something is wrong, thanks again.
And btw, what is the best kernel and rom untill now? I know allot depends by kernel...i need some speed and BATTERY
darktyroll said:
Thanks for the quick reply, and fluidity.
I will write back is something is wrong, thanks again.
And btw, what is the best kernel and rom untill now? I know allot depends by kernel...i need some speed and BATTERY
Click to expand...
Click to collapse
No prob, and by the way, why don't you simply flash pre-rooted GB rom (look for it in my sig.), it is already rooted and includes CWM recovery too. All you have to do is to just flash it and then flash any custom rom of your choice using cwm recovery.
Reason why I suggested flashing pre-rooted GB is that your rom seems to be non directly rootable and I think only option is to flash pre-rooted rom. (atleast as per my understanding)
jeetu1981 said:
No prob, and by the way, why don't you simply flash pre-rooted GB rom (look for it in my sig.), it is already rooted and includes CWM recovery too. All you have to do is to just flash it and then flash any custom rom of your choice using cwm recovery.
Reason why I suggested flashing pre-rooted GB is that your rom seems to be non directly rootable and I think only option is to flash pre-rooted rom. (atleast as per my understanding)
Click to expand...
Click to collapse
Well i think this i`m doing.
Right now i download SGN_XX_OXA_KJ1_FACTORYFS (GB Pre rooted ROM)
After that, since that pre-rooted rom have root, i can install cwm right?
Then i want to install an custom kernel and ICS rom (i think ics 4.0.4 is the best option for now, 4.1.1 i suppose it have bugs, i saw they are started only) -> that i asked you what is the best kernel and rom so far (ics)
Hope i`m doing good steps here
Update your phone the official way ie go into settings/about phone/ and your phone should update to ics. Then flash notecores kernal http://forum.xda-developers.com/showthread.php?t=1749863 using odin then your good to go i personally find this rom the besthttp://forum.xda-developers.com/showthread.php?t=1716088 but every1 has diffrent opinions depends wat u want.
Sent from my GT-N7000 using xda premium
darktyroll said:
Well i think this i`m doing.
Right now i download SGN_XX_OXA_KJ1_FACTORYFS (GB Pre rooted ROM)
After that, since that pre-rooted rom have root, i can install cwm right?
Then i want to install an custom kernel and ICS rom (i think ics 4.0.4 is the best option for now, 4.1.1 i suppose it have bugs, i saw they are started only) -> that i asked you what is the best kernel and rom so far (ics)
Hope i`m doing good steps here
Click to expand...
Click to collapse
If you choose to flash pre-rooted GB rom, then no need to install cwm separately, as it already includes cwmr, you just have to choose some custom rom and flash it using cwm recovery.
I was about to suggest you the other method of updating to stock ICS first and then rooting but it will take more time and it is of no use as your end motive is to flash custom roms
jeetu1981 said:
If you choose to flash pre-rooted GB rom, then no need to install cwm separately, as it already includes cwmr, you just have to choose some custom rom and flash it using cwm recovery.
I was about to suggest you the other method of updating to stock ICS first and then rooting but it will take more time and it is of no use as your end motive is to flash custom roms
Click to expand...
Click to collapse
Well, i will chose the method proviced by kyleastley too, seems more easy this way.
1- I will update to stock ics
2- then flash custom kernel .tar via odin
3- root and install cwm (if the custom kernel include already, dont know)
4- install custom rom (from cwm) since i can wipe after
Is ok this way?
So many questions, sorry guys }{
darktyroll said:
Well, i will chose the method proviced by kyleastley too, seems more easy this way.
1- I will update to stock ics
2- then flash custom kernel .tar via odin
3- root and install cwm (if the custom kernel include already, dont know)
4- install custom rom (from cwm) since i can wipe after
Is ok this way?
So many questions, sorry guys }{
Click to expand...
Click to collapse
Step 2 u can skip as its already done (dont know about root but definatly cmw) u wil not need root anyway as u can power down phone and reeboot into recovery via 3 button trick.
May i add step 6 install triangle away from play store as it will remove the triangle At boot as u flashed a kernal using odin.
As allways read and read again as uay already know that this phone has the brick problem but if u do everything by the book u will b ok.
Sent from my GT-N7000 using xda premium
darktyroll said:
Well, i will chose the method proviced by kyleastley too, seems more easy this way.
1- I will update to stock ics
2- then flash custom kernel .tar via odin
3- root and install cwm (if the custom kernel include already, dont know)
4- install custom rom (from cwm) since i can wipe after
Is ok this way?
So many questions, sorry guys }{
Click to expand...
Click to collapse
That's is completely fine if you want to go this way , step 1 and 2 are okay but step 3 not required as flashing custom kernel via odin will root and install cwmr. You will get yellow triangle and custom binary count by flashing custom kernel, which can be reset using triangle away. check rooting guide in my sig, once you are on stock ICS or ask here.
Checked above post after I posted mine, seems like its getting confusing here, okay so once you are on Stock ICS you have two methods to root and install cwmr,
1. once you are on stock ICS just flash some custom kernel using odin, it will root your device and flash cwmr too, then use triangle away app to remove yellow triangle and reset binary count. (method 2 in rooting guide in my sig.)
OR
2. Once you are on stock ICS, follow method 1 in rooting guide in my sig. in this you can root using stock recovery and then can flash custom kernel using mobile odin, so no yellow triangle or custom binary count.
jeetu1981 said:
That's is completely fine if you want to go this way , step 1 and 2 are okay but step 3 not required as flashing custom kernel via odin will root and install cwmr. You will get yellow triangle and custom binary count by flashing custom kernel, which can be reset using triangle away. check rooting guide in my sig, once you are on stock ICS or ask here.
Checked above post after I posted mine, seems like its getting confusing here, okay so once you are on Stock ICS you have two methods to root and install cwmr,
1. once you are on stock ICS just flash some custom kernel using odin, it will root your device and flash cwmr too, then use triangle away app to remove yellow triangle and reset binary count. (method 2 in rooting guide in my sig.)
2. Once you are on stock ICS, follow method 1 in rooting guide in my sig. in this you can root using stock recovery and then can flash custom kernel using mobile odin, so no yellow triangle or custom binary count.
Click to expand...
Click to collapse
Good you clarify me
5% left from download and then i will flash the update to ics.
let me see if i understand, after update to ics i will flash a custom kernel via odin (this will have root and cwm too), i will restart the phone and install yellow triangle and reset binary count
then i must root using stock recovery as you say and install again a custom kernel since the yellow triangle doesnt show up anymore? or you want to say i can flash custom rom since the triangle dont show up? -> confuse!
darktyroll said:
Good you clarify me
5% left from download and then i will flash the update to ics.
let me see if i understand, after update to ics i will flash a custom kernel via odin (this will have root and cwm too), i will restart the phone and install yellow triangle and reset binary count
then i must root using stock recovery as you say and install again a custom kernel since the yellow triangle doesnt show up anymore? or you want to say i can flash custom rom since the triangle dont show up? -> confuse!
Click to expand...
Click to collapse
No, don't follow what you have understood so far about rooting. these are 2 different methods for root, check rooting guide in my sig. it will clear everything.
And just want to make sure, are you downloading ICS rom or are you talking about percentage in kies?
jeetu1981 said:
No, don't follow what you have understood so far about rooting. these are 2 different methods for root, check rooting guide in my sig. it will clear everything.
And just want to make sure, are you downloading ICS rom or are you talking about percentage in kies?
Click to expand...
Click to collapse
Rom was donwloaded in phone, and installed as an update. Now i wait to finish the update.
darktyroll said:
Rom was donwloaded in phone, and installed as an update. Now i wait to finish the update.
Click to expand...
Click to collapse
Oh OTA, that's cool , now once you are on ICS (confirm it in setting/about phone before rooting) and then check rooting guide in my sig. and follow either method one OR method 2 described in it.
jeetu1981 said:
Oh OTA, that's cool , now once you are on ICS (confirm it in setting/about phone before rooting) and then check rooting guide in my sig. and follow either method one OR method 2 described in it.
Click to expand...
Click to collapse
I`m on ICS, trying to flash a custom kernel now via odin (or i must root first?)
and odin dont see my phone after i put in downloading mode.
darktyroll said:
I`m on ICS, trying to flash a custom kernel now via odin (or i must root first?)
and odin dont see my phone after i put in downloading mode.
Click to expand...
Click to collapse
No need to have root to flash custom kernel via odin, it will root it automatically.
Do you have Samsung drivers installed on your PC? If yes then try restarting your phone once again.
jeetu1981 said:
No need to have root to flash custom kernel via odin, it will root it automatically.
Do you have Samsung drivers installed on your PC? If yes then try restarting your phone once again.
Click to expand...
Click to collapse
Yes, drivers was. Anyhow i reinstalled other drivers, now odin see my phone :X
I flash custom kernel (HydraCore_v1 build12)
Indeed, SU is installed now.
Now i must install that apk to remove the triangle and then i can install custom rom? If yes, when i will install custom ics, i can wife before it now?
darktyroll said:
Yes, drivers was. Anyhow i reinstalled other drivers, now odin see my phone :X
I flash custom kernel (HydraCore_v1 build12)
Indeed, SU is installed now.
Now i must install that apk to remove the triangle and then i can install custom rom? If yes, when i will install custom ics, i can wife before it now?
Click to expand...
Click to collapse
You don't have to remove yellow triangle to install custom rom, you can still do it. Traingle away is just to remove the yellow triangle and to reset binary count for warranty purpose. Yes, you can wipe now, as you are on safe kernel.
Download any custom rom, which you wish to install, put it in your SD, boot in CWMR , perform full wipe and then flash the rom .zip.
jeetu1981 said:
You don't have to remove yellow triangle to install custom rom, you can still do it. Traingle away is just to remove the yellow triangle and to reset binary count for warranty purpose. Yes, you can wipe now, as you are on safe kernel.
Download any custom rom, which you wish to install, put it in your SD, boot in CWMR , perform full wipe and then flash the rom .zip.
Click to expand...
Click to collapse
Ok, i will try this last step.
Sorry, i late with writing, seems i got problems with all xp drivers, dunno why but i cannot transfer nothing betwheen pc and phone :|
THANKS FOR ALL!
I have used Triangle Away on XXBMA2 and the sboot it came with and while the flash counter is successfully reset, my system status flag is not, it keeps saying "custom" whatever I do with Triangle Away. Has anyone successfully stockified their I9305, and if so, which ROM and sboot? Does it even depend on sboot?
You need to do a complete wipe too.
CalInTheZone said:
You need to do a complete wipe too.
Click to expand...
Click to collapse
Yes I have done that. I started on XXBMA2, rooted and stuff, used Triangle Away and before booting I went into download mode and flashed completely stock. After that didn't work I rooted again, used Triangle Away again, and again, before booting I flashed stock. The only thing being reset is the flash counter.
I think you doing something wrong. Take it easy, root first or use pre-rooted rom. Use TA and let it finish job, boot normally. Once you've done it, reboot to DL mode, use Odin to flash Stock ROM. Restart your phone, go to Back up & Reset section in menu, select Factory Reset and voila. Should be clean as New
Sent from my GT-I9305 using xda app-developers app
Here is what I did on my Note 10.1:
Flashed ROM with correct CSC
Autorooted (Chainfire you know)
Ran TA
Before the device could boot entered recovery (on the phone you can pull the battery)
Did a full wipe
And all was virgin.
Just use this and all your problems will be solved...
http://forum.xda-developers.com/showthread.php?t=1942150
Why use this Root Method? Well the main reasons are:
- You have a complete Odin Flashable ROM Package.
- No Insecure Kernels are used or required.
- You can flash these packages on Non-Rooted devices
- The Binary Flash Counter will NOT increase when flashing these ROM Packages.
- The Red Exclamation Mark will NOT appear at boot up.
- And finally, you only have to flash one file in Odin and you have a complete firmware including Root Permissions.
Raistlin1158 said:
Just use this and all your problems will be solved...
http://forum.xda-developers.com/showthread.php?t=1942150
Why use this Root Method? Well the main reasons are:
- You have a complete Odin Flashable ROM Package.
- No Insecure Kernels are used or required.
- You can flash these packages on Non-Rooted devices
- The Binary Flash Counter will NOT increase when flashing these ROM Packages.
- The Red Exclamation Mark will NOT appear at boot up.
- And finally, you only have to flash one file in Odin and you have a complete firmware including Root Permissions.
Click to expand...
Click to collapse
Yeah but he need to send his phone to Service Centre for repair so Pre-Rooted Rom is out of game I guess...
Sent from my GT-I9305 using xda app-developers app
Its shows as original with a zero count so all he has to do is remove any apps that need root and he will be fine.
Raistlin1158 said:
Its shows as original with a zero count so all he has to do is remove any apps that need root and he will be fine.
Click to expand...
Click to collapse
I know all about it and you right but.... His phone is fully working (except Modem) and it's risky sending it rooted even if counter shows 0, imho....
Sent from my GT-I9305 using xda app-developers app
djembey said:
I know all about it and you right but.... His phone is fully working (except Modem) and it's risky sending it rooted even if counter shows 0, imho....
Sent from my GT-I9305 using xda app-developers app
Click to expand...
Click to collapse
As long as I can get the system status to appear original I don't care how I do it hehe.
Rekoil said:
As long as I can get the system status to appear original I don't care how I do it hehe.
Click to expand...
Click to collapse
Did you try my "recipe"? Because I've done that three times with three different devices. All successful.
CalInTheZone said:
Did you try my "recipe"? Because I've done that three times with three different devices. All successful.
Click to expand...
Click to collapse
I will give it a go this evening.
Good luck... If you don't succeed and you are in the area of Höör this weekend then contact me and I'll give it a try
Hi, i got a GT-I9305N too , you get system status flag as custom because your phone is still rooted, any modified changes in /system will make your system status as custom like su or busybox. In order to get system status flag to official, you need to reflash your phone with a stock rom with odin3 (Unroot the phone). Send me a private message and i'll link the right stock rom to you if you want, Comviq/tele2 rom if you bought the phone from them or nordic countries.
Use this to find the correct rom : http://samsung-updates.com/device/?id=GT-I9305#sthash.YrJ0gDPY.dpuf
Good luck :good:
Sv: [Q] Stockifying a GT-I9305(N)
Raistlin1158 said:
Use this:
Galaxy S 3 LTE GT-I9305 TLA I9305XXBMA4 Android 4.1.2 - Released 10.01.2013, Change log 746327
See more at: http://samsung-updates.com/device/?id=GT-I9305#sthash.YrJ0gDPY.dpuf
Good luck :good:
Click to expand...
Click to collapse
With this release he needs luck... wrong baseband.
Swyped on my Galaxy S III LTE
CalInTheZone said:
With this release he needs luck... wrong baseband.
Swyped on my Galaxy S III LTE
Click to expand...
Click to collapse
Baseband wouldn't work anyway, I need Perseus kernel for that to work, which is the whole reason why I am returning to stock (for service). The way I see it: as long as I can get the system status flag to say 'official' it doesn't matter how I do that because after I can flash any other official rom and the flag wont get touched, so I can return to my stock carrier rom anyway (which by the way is Tele2/Comviq as tico96 suggested).
Thanks for all the tips, I will give it another go tonight.
This is what I did just now:
While running XXBMA2 rooted and with Perseus kernel I applied Triangle Away
Rebooted straight into download mode (by holding home, vol down and power, should I be powering off normally first?)
Installed stock XXALIA
Cleared data
And the result?
Custom binary download: no
Current binary: Samsung official
System status: custom
Operating system status shows "modified"
Can someone honestly tell me they have been able to reset the system status flag on this hardware and also let me know exactly which ROM package they did it from and how they rooted etc. I don't care whether it is for I9305, I9305N or I9305T, radio working doesn't matter to me at all (because if radio has to work for it to revert to stock then I am ****ed either way).
I just want to return to system status: official or normal or whatever it is supposed to say.
Your non stock kernel is your problem. Just as soon as you boot with that you are "modified". Everything has to be stock kernel/recovery/CSC just with SU and you have to run TA and do a complete wipe before the system notice it's rooted. Then you are modified again.
CalInTheZone said:
Your non stock kernel is your problem. Just as soon as you boot with that you are "modified". Everything has to be stock kernel/recovery/CSC just with SU and you have to run TA and do a complete wipe before the system notice it's rooted. Then you are modified again.
Click to expand...
Click to collapse
Ok, so before running TA I have to have a stock kernel? But don't I need to reboot into a special mode if I have a secure kernel... meaning I end up booting a secure kernel to do the TA from anyway?
Come to think of it, I don't think I've ever run TA on a system with stock kernel and recovery... I always assumed that I could replace those directly after, perhaps the check is done when I go into download mode? Will try that tonight!
I've installed a number of ROMs on my phone without a hitch ever since rooting it last year.. until now. I did admittedly do one thing different this time around, and that was formatting both the emmc and preload, too, which I'm for some reason now beginning to believe was a bad move. I don't even know why I did that knowing full well that I have absolutely zero technical know-how of these things lol.. Should've just stuck with the fool proof "safe kernel > full wipe > wipe caches > rom and gapps (if required)" formula.
Anyway, I was on a CM10.1 ROM before this happened (vanilla rootbox). I rebooted to recovery, did a full wipe, wiped caches, formatted system, data, preload and emmc, flashed hydracore 7.0 standard and rebooted to recovery again. I then tried installing beerbong's AOSPA PA3.56 ROM which failed with an error that read something like "installation failed, filename.zip (bad)". Even the ROMS that previously installed without an issue won't install now, including vanilla rootbox (returns a status 7 error)..
The f*** have I done ? Please help.
download and copy onto your phone any Philz kernel for JB. After you have flashed that then you can install the other ROMs.
XxPixX said:
download and copy onto your phone any Philz kernel for JB. After you have flashed that then you can install the other ROMs.
Click to expand...
Click to collapse
Cheers! I'll try the latest PhilZ kernel and report back.
Edit:
Right. So, umm, it's not even letting me install the kernel now -- getting the same error. Hmm :/
Ok, download the TAR version of Philz kernel and flash it with odin.
XxPixX said:
Ok, download the TAR version of Philz kernel and flash it with odin.
Click to expand...
Click to collapse
Lol, I have the yellow triangle now. Bahhh
ultrono said:
Lol, I have the yellow triangle now. Bahhh
Click to expand...
Click to collapse
Go to the android development forum. The triangle away procedure right there in the stickies.
Varad297 said:
Go to the android development forum. The triangle away procedure right there in the stickies.
Click to expand...
Click to collapse
Yeah I've already checked that out -- the problem, however, is that I don't have soldering equipment required for the procedure mentioned :/
I am able to put the phone in download and recovery mode, though (if that can in any way mean that an alternative method to get rid of the yellow triangle can also be used).
ultrono said:
Yeah I've already checked that out -- the problem, however, is that I don't have soldering equipment required for the procedure mentioned :/
I am able to put the phone in download and recovery mode, though (if that can in any way mean that an alternative method to get rid of the yellow triangle can also be used).
Click to expand...
Click to collapse
have you tried flashing stock rom in download mode using pc odin?
treacherous_hawk said:
have you tried flashing stock rom in download mode using pc odin?
Click to expand...
Click to collapse
That I haven't. I'll try that and report back. Cheers!
Edit:
Dude! That worked (for the yellow triangle)! Haha, thanks
The system 7 error on trying to install custom roms is still there, though (even with the latest Philz kernel).
ultrono said:
That I haven't. I'll try that and report back. Cheers!
Edit:
Dude! That worked (for the yellow triangle)! Haha, thanks
The system 7 error on trying to install custom roms is still there, though (even with the latest Philz kernel).
Click to expand...
Click to collapse
try to install CM 10 kernel first and then flash the CM rom.
Hey guys thx for reading,
have a sm-G870A with 5.0 lollipop flashfired by muni everything was good till my boot up screen wouldnt show safestrap. so i messed with it and found myself installing twrp recovery not thinking correctly i now know. So my dilema is that im stuck at at&t splash screen, i tried odin to stock nE4,
i also tried the stock 4.4.2 rom to totally reset framwork, but still cant get passed the splash screen. do i gotta flash the oc5 stock rom from stock recov? or odin? any help all plz much appreciated tyvm.
biohazzord said:
Hey guys thx for reading,
have a sm-G870A with 5.0 lollipop flashfired by muni everything was good till my boot up screen wouldnt show safestrap. so i messed with it and found myself installing twrp recovery not thinking correctly i now know. So my dilema is that im stuck at at&t splash screen, i tried odin to stock nE4,
i also tried the stock 4.4.2 rom to totally reset framwork, but still cant get passed the splash screen. do i gotta flash the oc5 stock rom from stock recov? or odin? any help all plz much appreciated tyvm.
Click to expand...
Click to collapse
You are going to have to reflash stock firmware yes, theres a thread for it in general, might be a couple pages back. Just for future refrence, safestrap doesnt really work(in a fully conventional way) on lollipop, and you cant install twrp or cwm or philz or anything else.
Sent from my Twi5ted SM-G900A using Tapatalk
Rakuu said:
You are going to have to reflash stock firmware yes, theres a thread for it in general, might be a couple pages back. Just for future refrence, safestrap doesnt really work(in a fully conventional way) on lollipop, and you cant install twrp or cwm or philz or anything else.
Sent from my Twi5ted SM-G900A using Tapatalk
Click to expand...
Click to collapse
see i already tried using odin for the G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar but it still wont push through the splash screen.
are you saying i need to odin G870A_OC5_Stock_Rooted_ROM?
biohazzord said:
see i already tried using odin for the G870AUCU1ANE4_G870AATT1ANE4_G870AUCU1ANE4_HOME.tar but it still wont push through the splash screen.
are you saying i need to odin ?
Click to expand...
Click to collapse
G870A_OC5_Stock_Rooted_ROM won't flash with Odin. If you flashed stock NE4 .tar in odin and won't boot try factory reset from recovery
nutt_case said:
G870A_OC5_Stock_Rooted_ROM won't flash with Odin. If you flashed stock NE4 .tar in odin and won't boot try factory reset from recovery
Click to expand...
Click to collapse
ok im trying that as we speak. will that delete all my data. probably right?
biohazzord said:
ok im trying that as we speak. will that delete all my data. probably right?
Click to expand...
Click to collapse
Yes it will