Hi, recently I got a bluetooth Samsung speaker, it works fine with my mini in gb, but i can't find a way to make it work on CM10.1. I already tried a bunch of apps (btmono, mono bluetooth router, etc) and still playing the audio through the earphone when it appear like connected in bt settings. If anyone knows a fix or app to solve this, that would be awesome. Thanks people :good:
Related
Greetings,
I need some help with Bluetooth. I am using 6.5 21222 from DaG's Kitchen. I have tried every 6.1 and 6.5 variant produced thus far and cannot get consistency with my Bluetooth problem.
My car stereo (Pioneer p-980BT) has the ability to connect using bluetooth for hands free calling as well as audio streaming. The hands free calling always works fine, but I cannot get the audio connection to work. I have tried everything I can think of. I disabled the Handsfree profile but it still connects to hands free. With a hard reset on both the phone and car stereo, I can connect the audio on the first try. However, if I turn either one off, it will not connect the audio again. Handsfree works like a champ no matter what I do.
I have googled and spent several hours looking through the forum, but have not been able to find anything.
Is anyone aware of a tool or registry setting that might help give my audio connection some priority?
Thanks for any advice.
Doug M.
I had the same problem with my Pioneer Avic D3. handsfree works but the Audio stream doesnt work until I found A2DP toggle this enables the Audio streaming .
chadster214 said:
I had the same problem with my Pioneer Avic D3. handsfree works but the Audio stream doesnt work until I found A2DP toggle this enables the Audio streaming .
Click to expand...
Click to collapse
Thanks a ton for your help. I have spent untold hours fiddling with this trying to get it to work. Installing A2DP Toggle made it work right away.
Thanks again for the help.
Doug M.
Hi,
I want to try and disable the A2DP connection (Media Audio) on my BT car stereo so only the Phone Audio is connected (so I can hear Navigation instructions through the phone speaker).
Although the option to "uncheck" the Media Audio on the bluetooth connection is there, it doesn't seem to work (despite warning that it will switch off the Media Audio), as it just reconnects anyway, even when the option is unchecked.
Does anybody know of a fix or workaround for this behaviour? There are plenty of apps to auto-connect A2DP, but I can't find any to disconnect.
Cheers,
Steve.
Hey Steve.
I have a Nexus 4 and I'm running CM10.1. Unfortunately, I'm having the same problem and I haven't found a fix for it yet. Have you had any luck yet?
Thanks,
Jonathan
I have a problem using the bluetooth on my Optimus 2X in the car.
Bluetooth audio works fine for playing music from the phone through the car stereo, but when I try to use the hands-free function built into the car, there is no audio. Calls dial properly, including voice dialling, but there is no sound! I cannot answer calls because no ring tone sounds! There is no sound at the phone, so it thinks it is using the car.
I am using CM10.1.
I was previously on CM7, which worked properly.
I have tried an old Sony Ericsson K800i in the car, and that performs flawlessly, so the bluetooth hands-free sound problem is definitely at the phone end rather than the car.
Any help appreciated.
Thanks.
grim64 said:
I have a problem using the bluetooth on my Optimus 2X in the car.
Bluetooth audio works fine for playing music from the phone through the car stereo, but when I try to use the hands-free function built into the car, there is no audio. Calls dial properly, including voice dialling, but there is no sound! I cannot answer calls because no ring tone sounds! There is no sound at the phone, so it thinks it is using the car.
I am using CM10.1.
I was previously on CM7, which worked properly.
I have tried an old Sony Ericsson K800i in the car, and that performs flawlessly, so the bluetooth hands-free sound problem is definitely at the phone end rather than the car.
Any help appreciated.
Thanks.
Click to expand...
Click to collapse
It's a well known problem common to many JB 4.2.2 (and thus CM 10.1). The devs are working hard to resolve this problem but no solution yet.
The best ROMs for Bluetooth are the ones based on JB 4.1.2 (CM10)
chp2 said:
It's a well known problem common to many JB 4.2.2 (and thus CM 10.1). The devs are working hard to resolve this problem but no solution yet.
The best ROMs for Bluetooth are the ones based on JB 4.1.2 (CM10)
Click to expand...
Click to collapse
Thanks for the reply. I'll give CM10 a go.
I recently purchased a Sony bluetooth PS3 headset which also pairs fine with my Note. Calls are working great but the headset doesn't support the streaming of any other sounds apparently.
There're a few apps (BTMono and Mono Bluetooth Router for example) that are supposed to 'fix' this issue but they don't work on my Note. I'm using Slimrom 4.2.2 build 8. I don't get any error messages from the apps, they seem to activate correctly but no audio is being played through the headset.
Does anyone have an idea on how to fix this? I would just like to hear my gps navigation through my bluetooth because I have a very loud car and can't hear the nav when my phone is mounted on my dashboard.
Thanks in advance.
I've had a similar issue with a bluetooth headset at work - I imagine fixing this would involve diverting TTS/Music/whatever audio stream to the phone call audio stream. I've tried looking at Tasker, and frustratingly you can tell it to play a single file over the call stream, but can't set a perminant "divert notifications to call" or similar setting. Not as far as i can see.
I use the app called Mono Bluetooth Router to hear music through BT headsets. Works fine with other phones, but does not work with this.
I am on 4.1.2 stock rom. The phone connects with the BT headset, but when I activate Mono Bluetooth Router, it connects to the phone but no sound is transferred. It has to be a software issue or a Bluetooth setting, but I can not see any way to access to advanced BT settings.
Any help would be very appreciated. If you are using another app different than mono Bluetooth Router and if it is working, please advise.
I answer myself
errotaxar said:
I use the app called Mono Bluetooth Router to hear music through BT headsets. Works fine with other phones, but does not work with this.
I am on 4.1.2 stock rom. The phone connects with the BT headset, but when I activate Mono Bluetooth Router, it connects to the phone but no sound is transferred. It has to be a software issue or a Bluetooth setting, but I can not see any way to access to advanced BT settings.
Any help would be very appreciated. If you are using another app different than mono Bluetooth Router and if it is working, please advise.
Click to expand...
Click to collapse
I have found a free apk that works like a charm: audiorouter. Problem solved.
Anyway, if somebody is using another apk, please comment.