Thanks to cwm recovery builder
I built cwm touch recovery 6.0.3.6 for the XT925 & XT926 if anyone is interested it has the warning no file context at the bottom It doesn't affect anything when flashing. (Two download links provided)
XT926
http://db.tt/YX7Cqk2l
https://mega.co.nz/#!5xwhGRzK!yYxm2n8uGnc_tS6CUwVtB9sgOsRn-pa5hDn6J0t4RBs
I do not own an XT925 so you will have to test and let me know
XT925
http://db.tt/I1CVqi6k
https://mega.co.nz/#!14RRWKZS!y6JvDU_InS-LC9gX3VfiR82AwQosbe2kJTi11vxAwwg
Disclaimer: You are responsible for what you do with your device not me, xda or cwm builder.
Edit: you can follow guide in post 2 by vadakr or use Flashify app from play store to flash this.
Sent from my DROID RAZR HD using Tapatalk 2
Just flashed and booted into it successfully
I was just considering going to TWRP for touch, so your post was very timely. I flashed it and it seems to work just fine. More importantly, the interface is something that I'm used to. Thank you!
For folks who've forgotten how to flash a recovery image -
Power off the phone
Hold down the power, vol up and vol dn buttons until you see a menu
Use the vol dn to go to "AP Fastboot"
Use the vol up to select it
Connect the phone to your computer. The phone should report "usb connected"
Issue the command "fastboot flash recovery <recoveryImageFileName>.img"
After the image has been successfully flashed to the phone, issue the command "fastboot reboot" to reboot the phone
vadakr said:
I was just considering going to TWRP for touch, so your post was very timely. I flashed it and it seems to work just fine. More importantly, the interface is something that I'm used to. Thank you!
For folks who've forgotten how to flash a recovery image -
Power off the phone
Hold down the power, vol up and vol dn buttons until you see a menu
Use the vol dn to go to "AP Fastboot"
Use the vol up to select it
Connect the phone to your computer. The phone should report "usb connected"
Issue the command "fastboot flash recovery <recoveryImageFileName>.img"
After the image has been successfully flashed to the phone, issue the command "fastboot reboot" to reboot the phone
Click to expand...
Click to collapse
Thanks for the guide you can always just Flashify to flash recovery it will backup the current recovery its a great app
Sent from my DROID RAZR HD using Tapatalk 2
Is a xt925 version comming soon ?
Envoyé depuis mon XT925 avec Tapatalk
Thanks. I will flash it later tonight a report back
Sent from my XT926 using xda developers app
spart'84120 said:
Is a xt925 version comming soon ?
Envoyé depuis mon XT925 avec Tapatalk
Click to expand...
Click to collapse
Will work on that today and post in a few hours I don't own a xt925 so I can't test it maybe u can
Sent from my DROID RAZR HD using Tapatalk 2
OP updated
Sent from my DROID RAZR HD using Tapatalk 2
backup went ok on the XT925 wasn't able to restore hung on boot got an error unable to restore cache ---it worked fine on systen and data I spoke to soon earlier an edited post
Everything so far has worked great..flashed cm10.2 with clean install and dirty with the next nightly..both worked perfect..backup and restore also worked. I have xt926. Thanks for keeping our recovery up to date..
Sent from my XT926 using Xparent Green Tapatalk 2
Backed up current ROM, wiped, & tried to flash Slimbean. Flash failed. Tried to restore backup, restore failed.
Sent from my Razr HD using XDA Premium 4 mobile app
bigdanmeys13 said:
Backed up current ROM, wiped, & tried to flash Slimbean. Flash failed. Tried to restore backup, restore failed.
Sent from my Razr HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
925 or 926 ?
Sent from my XT926 using Xparent Green Tapatalk 2
XT926, sorry. I guess that would be helpful info. Also, the only file I have in my cwm folder is "recovery version". The recovery appeared to flash and run fine. I don't get it
Sent from my Razr HD using XDA Premium 4 mobile app
bigdanmeys13 said:
XT926, sorry. I guess that would be helpful info. Also, the only file I have in my cwm folder is "recovery version". The recovery appeared to flash and run fine. I don't get it
Sent from my Razr HD using XDA Premium 4 mobile app
Click to expand...
Click to collapse
You might try to redownload and flash again.. I came from the previous cwrm if that matters. All has worked fine for me.
Sent from my XT926 using Xparent Green Tapatalk 2
Working excellent on my XT-925!!!
Thank you!!!
Working !!!
Working on my XT-925 with stok Rom 98.21.26002.XT925.Orange.en.GB VQU-26
krazyace35 said:
Thanks to cwm recovery builder
I built cwm touch recovery 6.0.3.6 for the XT925 & XT926 if anyone is interested it has the warning no file context at the bottom It doesn't affect anything when flashing.
Click to expand...
Click to collapse
Just stopped in to say hi. Recognized your name from the Tab 3 forums. Just grabbed a HD Maxx from Swappa today to replace my Rezound.
gr8nole said:
Just stopped in to say hi. Recognized your name from the Tab 3 forums. Just grabbed a HD Maxx from Swappa today to replace my Rezound.
Click to expand...
Click to collapse
Yea thanks man RAZR HD thread is usually where I hang out hope you enjoy the HD
Sent from my XT926 using Tapatalk 2
Hi Will test it later, just one question, it is like oudhs right?
Enviado desde mi Droid RAZR HD usando Tapatalk
Related
how can i launch the Mirror mode?
it showed no signal on TV.
Likewise. Hdmi not recognized. Running steel droid 2.0
Sent from my DROID3 using XDA App
Get the DLNA patch from the OP steel Droid thread.
Sent from my DROID3 using xda premium
any solution?....
? i cant get wat u mean?...
He means this:
http://dev-host.org/43upxrej3vzm/DLNA.zip
You'll need to flash using CWM.
Only for Steel Droid Rom.
i juz downloaded Droid3 Bootstrapper,
thn i should click on Bootstrap Recovery or Reboot Recovery? to flash the file you attached above?
Thanks for your help! ^^
aaron1389 said:
i juz downloaded Droid3 Bootstrapper,
thn i should click on Bootstrap Recovery or Reboot Recovery? to flash the file you attached above?
Thanks for your help! ^^
Click to expand...
Click to collapse
Click bootstrp recovery, let it get permissions, select reboot rocovery, select BPTools, the update with zip from SD-card or internal SD card (and drill down to whereever you put the download.
Work Perfectly.......
Thanks alot！！！
With stock rom, you just plug the hdmi in and your good too go after about 10 secs.
Sent from my DROID3 using XDA App
If you're just debloated, read this:
http://forum.xda-developers.com/showpost.php?p=18305311&postcount=184
ckarrow2 said:
He means this:
http://dev-host.org/43upxrej3vzm/DLNA.zip
You'll need to flash using CWM.
Only for Steel Droid Rom.
Click to expand...
Click to collapse
Works also with Monster Rom
Inviato dal mio DROID3 usando Tapatalk
So I been trying to root my phone for about an hour now. I rooted, un-rooted then rooted again, and it seems to have work (obviously you can't tell when your phone is rooted, but oh well). I'm kind of a noob in the Droid 3 section, but then I went to the Market place and downloaded the "ROM Manager", downloaded the CM9 recovery, and had the app boot into recovery but to my surprise, it doesn't work for some reason. I don't under what else I can do, am I rooted? Do I need to manually install CM9 recovery? I just want ICS on my phone, and this is driving me crazy.
Sent from my DROID3 using xda premium
Do you have Super User app on your phone ?
Yup. I do, I have no idea where it came from though.
Sent from my DROID3 using xda premium
Does it open? Look up the thread for boot two roms at once in the genreal section. Follow that and you will have ICS. You should wait tho, as a new build will be up tonight for ics.
Sent from my XT862 using Tapatalk
Yup, it opens and shows the applications that I allow, does this mean that I'm rooted for sure? I'll definitely wait for the new ICS rom tonight, just want to make sure if I can boot into recovery. I tried using the "X" and power button but it just gives me the triangle with the "!" logo inside.
Sent from my DROID3 using xda premium
I believe in the droid 3...you hold the Power + M for recovery. Not the X.
Root checker is an app that will tell you if you are rooted. You need to either install the droid 3 bootstrap or safestrap to get cwm recovery.
Sent from my XT862 using XDA App
ChristianPreachr said:
I believe in the droid 3...you hold the Power + M for recovery. Not the X.
Click to expand...
Click to collapse
Its kind of either or.
You can hold Power + M, and use the volume keys to select recovery, or you can hold Power + X and it will go to recovery as well.
Sent from my DROID3 using XDA premium
Jay_8698 said:
Yup, it opens and shows the applications that I allow, does this mean that I'm rooted for sure? I'll definitely wait for the new ICS rom tonight, just want to make sure if I can boot into recovery. I tried using the "X" and power button but it just gives me the triangle with the "!" logo inside.
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
It gave ya the right screen. But that takes you to the stock recovery. To install roms you will need Clockworkmod Recovery or Safestrap Recovery.
Sent from my DROID3 using XDA premium
Go with safestrap. Especially if you're new to this.
Sent from my XT860 using xda premium
Jay_8698 said:
Yup. I do, I have no idea where it came from though.
Sent from my DROID3 using xda premium
Click to expand...
Click to collapse
Well for me from manager doesn't work.. the recovery it installs does not start from app... never tried other way . Uninstaled RM and installed only hashcode's safestrap so you don't need to start in recovery.: it will give you the option to open the cwm menu from boot by pressing menu button when prompted and if nothing done then start normally..
:in hashcode's blog are: instructions for flashing cm9 with safestrap
Good look
Enviado desde mi XT862 usando Tapatalk
Endoroid said:
Go with safestrap. Especially if you're new to this.
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
Ditto
In hashcode blog are instructions for safestrap and cm9 installing
Enviado desde mi XT862 usando Tapatalk
Unofficial ClockworkMod 6.0.2.8 non-touch
READ FIRST
*** *** *** *** Disclaimer *** *** *** ***
I am not responsible if you break your stuff. READ READ READ
If you DO NOT own a VERIZON Galaxy Tab 2 7.0 SCH-I705 then DO NOT flash this! If you have not verified and flash this on a p3xxx tab, something will break and I will not help you!
YOU MUST BE ROOTED AND UNLOCKED!
How to flash:
ADB or Terminal Emulator
1. Download CWM 6.0.2.8 to the root of your SD Card -- CWM 6.0.2.8 recovery.img
MD5sum: d88bc5f002007ee098bec6b8a32f8b0c
2. From Terminal emulator or ADB do the following:
From ADB
Code:
adb shell
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18
reboot recovery
From Terminal
Code:
su
dd if=/sdcard/recovery.img of=/dev/block/mmcblk0p18
reboot recovery
ODIN
1. Install Samsung Device Drivers -- Samsung_Mobile_USB_Driver.exe
2. Download ODIN 3.04 and extract to an easy to remember location on your computer -- odin304.zip
3. Download CWM 6.0.2.8 to a easy to remember location on your computer -- CWM 6.0.2.8 recovery.tar.md5
4. Open ODIN 3.04
5. UNCHECK Everything in top left EXCEPT auto reboot
6. Click PDA and select the recovery.tar.md5 you downloaded in step 3
7. Click 'Start' *DO NOT UNPLUG YOUR TAB! IT WILL BRICK!*
Congratulations! You should now have a functional CWM 6.0.2.8 recovery.
Once you got custom, NEVER accept an OTA!
Thanks to:
The CyanogenMod team. Those guys are genius!
Thanks Hyde!
Just loaded this up and its working fine for me.. great work
Nexttonomy
It's nicer if you click the thanks button
MrHyde03 said:
It's nicer if you click the thanks button
Click to expand...
Click to collapse
will it work for p3100?
Read the thread title. It says sch-i705..
I can't seem to flash this recovery file in odin on my Verizon Galaxy Tab 2 7.0 LTE. I keep getting fail error message. Any advise?
What error do you see in your tab after it fails? And did you flash the insecure aboot?
Sent from my SCH-I535 using XDA Premium HD app
MrHyde03 said:
What error do you see in your tab after it fails? And did you flash the insecure aboot?
Sent from my SCH-I535 using XDA Premium HD app
Click to expand...
Click to collapse
Just says Fail. Where is the insecure aboot?
Sent from my EVO using xda app-developers app
Follow the root/unlock/recovery thread from start to finish..
Sent from my SCH-i705 using XDA Premium HD app
MrHyde03 said:
Follow the root/unlock/recovery thread from start to finish..
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
Yes, I am, but for some reason I can't get clockworkmod recovery to flash...
Sent from my EVO using xda app-developers app
MrHyde03 said:
Follow the root/unlock/recovery thread from start to finish..
Sent from my SCH-i705 using XDA Premium HD app
Click to expand...
Click to collapse
Here is a screenshot of the error message when trying to flash custom clockworkmod recovery.
jshawjr said:
Here is a screenshot of the error message when trying to flash custom clockworkmod recovery.
Click to expand...
Click to collapse
Okay, it finally worked! Thanks!!!
Sent from my EVO using xda app-developers app
jshawjr said:
Okay, it finally worked! Thanks!!!
Sent from my EVO using xda app-developers app
Click to expand...
Click to collapse
I'm now looking for a Stable Jelly Bean Rom...
Sent from my EVO using xda app-developers app
ROM dev on this device is pretty slow going / dead.. There's only a couple of us who are actively trying to get stuff going, but it's difficult to have no official support. I've been working on CM10 the past few weeks... maybe I'll get something going that actually boots.
MrHyde03 said:
ROM dev on this device is pretty slow going / dead.. There's only a couple of us who are actively trying to get stuff going, but it's difficult to have no official support. I've been working on CM10 the past few weeks... maybe I'll get something going that actually boots.
Click to expand...
Click to collapse
No problem. What about Jelly Bean Base? Is there anything out there yet?
Sent from my EVO using xda app-developers app
Nope
Sent from my SCH-I535 using XDA Premium HD app
MrHyde03 said:
Nope
Sent from my SCH-I535 using XDA Premium HD app
Click to expand...
Click to collapse
Wow! Thanks...Guess I can stop searching then...
Updated OP with cwm 6.0.2.8!
Hey guys,
So, I have an unlocked Bell Atrix HD on AT&T, and I checked for update and I just got a notification that the 4.1.2 update is available. I'm going to wait to update until I get home (its over 200 mb).
cajunaggie87 said:
Hey guys,
So, I have an unlocked Bell Atrix HD on AT&T, and I checked for update and I just got a notification that the 4.1.2 update is available. I'm going to wait to update until I get home (its over 200 mb).
Click to expand...
Click to collapse
4.1.2?
Sent from my MB886 using xda premium
Markyzz said:
4.1.2?
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
Yeah, that's what it said. I thought I was seeing things. I'm actually downloading it right now (I can't wait). I'll keep you updated.
cajunaggie87 said:
Yeah, that's what it said. I thought I was seeing things. I'm actually downloading it right now (I can't wait). I'll keep you updated.
Click to expand...
Click to collapse
Please save a copy to your SD card before updating. It should be in /cache
Sent from my MB886 using xda premium
try going Settings -> Application Manager -> (scroll over to all) Google Services Framework then hit “Clear data”
sometimes it takes 5+ times, at least with other phones
Markyzz said:
Please save a copy to your SD card before updating. It should be in /cache
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
Sorry man, already pulled the trigger.
But yes, it is 4.1.2.
seriously ...I'll be needing this :good:
Update file ,anyone ?
Please need screenshot de about phone complete and build.prop, default.prop of system
Enviado desde mi XT925 usando Tapatalk 2
cajunaggie87 said:
Hey guys,
So, I have an unlocked Bell Atrix HD on AT&T, and I checked for update and I just got a notification that the 4.1.2 update is available. I'm going to wait to update until I get home (its over 200 mb).
Click to expand...
Click to collapse
Great! I am downloading it too, hope that Project butter will make the phone smoother, and I long for the Quick settings:good::good:
the_onlysun said:
Great! I am downloading it too, hope that Project butter will make the phone smoother, and I long for the Quick settings:good::good:
Click to expand...
Click to collapse
Hi, are you using Atrix HD bell? How come i just check my phone and there's no update.
Sent from my MB886 using xda premium
ryuben2k said:
Hi, are you using Atrix HD bell? How come i just check my phone and there's no update.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
hi, i ma also using unlocked Bell's Atrix HD (system version 77.55.17.mb886.bellmobility.CA) and i don't have update yet.
Does anybody know when this version will get update? thanks
hrvojeg said:
hi, i ma also using unlocked Bell's Atrix HD (system version 77.55.17.mb886.bellmobility.CA) and i don't have update yet.
Does anybody know when this version will get update? thanks
Click to expand...
Click to collapse
What i know we will get update in 1st quarter of 2013. Base on the Motorola website. For the ATT before the end of 2012.
That's why i got confuse when i saw in here that they have update for there atrix hd bell version.
Sent from my MB886 using xda premium
Can anyone on 4.1.2 send me a system pull?
Preferably a Linux or Mac one ran as root.
sudo adb pull system
Or if only windows computers....
adb pull system
Also screenshots of settings > about phone would be great.
Sent from my DROID RAZR HD using Tapatalk 2
I've found on canadian motorola site that version 77.55.18. Started to receive updates, want to know what's up with 77.55.17 versions, anyone here with this software version?
Sent from my MB886 using Tapatalk
ryuben2k said:
What i know we will get update in 1st quarter of 2013. Base on the Motorola website. For the ATT before the end of 2012.
That's why i got confuse when i saw in here that they have update for there atrix hd bell version.
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
The reason my carrier unlocked Bell AHD got the update is because I am using AT&T right now. But, good news for Bell users is that the Bell version will have 4.1.2 (which is what I got), while the ATT versions get 4.1.1.
hrvojeg said:
I've found on canadian motorola site that version 77.55.18. Started to receive updates, want to know what's up with 77.55.17 versions, anyone here with this software version?
Sent from my MB886 using Tapatalk
Click to expand...
Click to collapse
I have a 77.55.17 version and there's no updates for us. Is there a way i can upgrade my version from 77.55.17 to 77.55.18?
Sent from my MB886 using xda premium
ryuben2k said:
I have a 77.55.17 version and there's no updates for us. Is there a way i can upgrade my version from 77.55.17 to 77.55.18?
Sent from my MB886 using xda premium
Click to expand...
Click to collapse
You can use RSDlite (latest version- 6.14 i believe) and flash the FXZ file for the 77.55.18 version and wipe data after you flash it through stock recovery.
link for the fxz files: http://forum.xda-developers.com/showthread.php?t=1853522
Steps:
1. Enable USB debugging on your phone (also download motorola drivers)
2. Boot into fastboot (hold power button+volume down+volume up) - use volume down to scroll and volume up to select
3. Extract the zip file you downloaded
4. Open RSDlite and select the respective xml file
5. let it do its magic
6. let it reboot and you're done
Screenshot please of about phone complete
Enviado desde mi XT925 usando Tapatalk 2
gabo_e30 said:
You can use RSDlite (latest version- 6.14 i believe) and flash the FXZ file for the 77.55.18 version and wipe data after you flash it through stock recovery.
link for the fxz files: http://forum.xda-developers.com/showthread.php?t=1853522
Steps:
1. Enable USB debugging on your phone (also download motorola drivers)
2. Boot into fastboot (hold power button+volume down+volume up) - use volume down to scroll and volume up to select
3. Extract the zip file you downloaded
4. Open RSDlite and select the respective xml file
5. let it do its magic
6. let it reboot and you're done
Click to expand...
Click to collapse
Thanks, after i do this do you think it will not affect the bootloader of our device? It will still uunlocked?
Sent from my MB886 using xda premium
gabo_e30 said:
You can use RSDlite (latest version- 6.14 i believe) and flash the FXZ file for the 77.55.18 version and wipe data after you flash it through stock recovery.
link for the fxz files: http://forum.xda-developers.com/showthread.php?t=1853522
Steps:
1. Enable USB debugging on your phone (also download motorola drivers)
2. Boot into fastboot (hold power button+volume down+volume up) - use volume down to scroll and volume up to select
3. Extract the zip file you downloaded
4. Open RSDlite and select the respective xml file
5. let it do its magic
6. let it reboot and you're done
Click to expand...
Click to collapse
Thanks Gabo,
I am new to this. I folowed your guide and now I am on 77.55.18 version and please tell me do i need to wipe anything. For me it seems like everything is working ok but I still have no update to JB maybe because I am in Europe. Thanks
I flashed safestrap for the razr when it first came out but now I want to use cwm. I don't know how to uninstall it. I get the red ! dead andrord when I try and get in to recovery.. I need some help I have look for the answer by searching but don't see anything. I am still new to this and need a little guidance please...
Motorola atrix hd at&t rooted and unlocked bootloader...
thanks
Uh I removed safe strap on my device but I can't remember how. It might have involved full wipe or something like that. It is probably not the exact way to do it so don't do it if you don't trust me.
Sent from my Atrix HD using Tapatalk 4
Did you try using Myth Tools?
http://forum.xda-developers.com/showthread.php?t=2262726
Titanium backup will definitely do the job. -- Sent from my Amazon Kindle Fire using XDA Premium HD app
So you uninstalled it then if your getting the dead Android.. You just click uninstall within safestrap. Make sure you delete the created partition.
Sent from my PACMAN MATRIX HD MAXX
audit13 said:
Did you try using Myth Tools?
http://forum.xda-developers.com/showthread.php?t=2262726
Click to expand...
Click to collapse
No not yet I was wanting to uninstall safe strap before trying it.
Sent from my MB886 using xda app-developers app
deeje00 said:
So you uninstalled it then if your getting the dead Android.. You just click uninstall within safestrap. Make sure you delete the created partition.
Sent from my PACMAN MATRIX HD MAXX
Click to expand...
Click to collapse
I have looked for the uninstall within the safestrap but there is only a install tab and it is not highlighted..
Sent from my MB886 using xda app-developers app
Download a CWM image, boot to fastboot
fastboot erase recovery
fastboot flash recovery cwm.img
Right? You can unlock BL while on safestrap I'm sure, so I don't see why not.
Unless I'm just dumb and SafeStrap isn't installed to the phone's recovery partition...
Just wanted to say thanks for the help. I installed cwm recovery flashed the cm10.2 and the safestrap is no more...
Sent from my MB886 using xda app-developers app