Hello,
I am have recently rooted my SGSA. After reading the various recommndations on the forums, I installed TWRP recovery.
My first ROM was Galaxperia ROM by achyut. It was working fine in the beginning but after a while it started to lag a lot. The only reason I rooted my phone was that the stock firmware was laggy as hell. RAM usage was always above 500MB, and even after clearing it, it remained around 430MB. So naturally, I uninstalled that ROM.
After installing JellyMOD 4.0 ROM, I noticed the same problem. RAM usage was similar to Galaxperia.
So, can you guys suggest me a ROM which is fast enough and has low RAM usage?? is The current CM 10.1 version stable?
Any help is appreciated.
yes, cm10.1 is ALMOST stable. Only a few bugs like low incoming call volumes, etc.
You can surely use that, im also using that and has a lot of free ram which makes the phone rum super smooth. Im sure u'll also like that.
If you don't want to go to cm10.1, you can debloat your phones system, ie remove unwanted apps, yourself using titanium backup or root app delete.
szzlgupta said:
yes, cm10.1 is ALMOST stable. Only a few bugs like low incoming call volumes, etc.
You can surely use that, im also using that and has a lot of free ram which makes the phone rum super smooth. Im sure u'll also like that.
If you don't want to go to cm10.1, you can debloat your phones system, ie remove unwanted apps, yourself using titanium backup or root app delete.
Click to expand...
Click to collapse
Thanks. I'll be flashing the CM 10.1 ROM from here->http://forum.xda-developers.com/showthread.php?t=2108362&highlight=+rom+
Also, could you tell me what latest version of CoCore Kernel is stable and compatible with this CM?
Fusion_RIP said:
Thanks. I'll be flashing the CM 10.1 ROM from here->http://forum.xda-developers.com/showthread.php?t=2108362&highlight=+rom+
Also, could you tell me what latest version of CoCore Kernel is stable and compatible with this CM?
Click to expand...
Click to collapse
No no no no don't do this cm 10.1 is not compatible with any other kernel..
Just do the wipes and install cm 10.1 and it will install it's kernel by itself, no need to do anything extra
Other than flashing the rom.
Of you install the kernel after cm 10.1 you will get reboots and lot of fc's (force closes)..
The best rom====>cm 10.1
Sent from my GT-I9070 using xda app-developers app
zubairamd said:
No no no no don't do this cm 10.1 is not compatible with any other kernel..
Just do the wipes and install cm 10.1 and it will install it's kernel by itself, no need to do anything extra
Other than flashing the rom.
Of you install the kernel after cm 10.1 you will get reboots and lot of fc's (force closes)..
The best rom====>cm 10.1
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I'm confused Should I flash the CM 10.1 from this link or not?
Fusion_RIP said:
I'm confused Should I flash the CM 10.1 from this link or not?
Click to expand...
Click to collapse
Yes you can flash from cocore kernel (I know you need the perm recovery). But after flashing CM, cocore kernel will be replaced with CM kernel. And like the guys said before, you can't flash cocore after flashing CM as it is not compatible. Only use CM with its kernel (you gets it with the rom itself). Hope this clears your confusion.
As for what cocore you need for flashing CM, it don't really matter.
Sent from my GT-I9070 using xda app-developers app
Fusion_RIP said:
I'm confused Should I flash the CM 10.1 from this link or not?
Click to expand...
Click to collapse
Yes, you should.
1. Download the latest cm10.1 nightly and 4.2.2 gapps
2. Flash any cocore 6.8/7.0 with cwm
3. Make nandroid backup
4. Wipe data, cache, dalvik cache
5. Flash cm10.1, gapps
And you're Done. Go for it.
Fusion_RIP said:
I'm confused Should I flash the CM 10.1 from this link or not?
Click to expand...
Click to collapse
Just go to this link====>http://goo.im/devs/diegoch/janice/cm-10.1/nightly/
here you can download the latest nightly AND flash accordingly..
or you can just follow the steps laid down by the szzlgupta..
no need to factory reset, just wipe dalvik cache and cache if upgrading from one cm 10.1 nightly to another..
but when coming from another rom or stock you know what to do..
I have flashed the CM 10.1 from the forum's link (not the recent nightly build).
I am having a few issues. Firstly, where is the RAM manager? Also, the options in the drop-down menu are very less. Not at all what I was expecting:crying:
Fusion_RIP said:
I have flashed the CM 10.1 from the forum's link (not the recent nightly build).
I am having a few issues. Firstly, where is the RAM manager? Also, the options in the drop-down menu are very less. Not at all what I was expecting:crying:
Click to expand...
Click to collapse
First of all flash the latest nightly and make sure to wipe cache and dalvik cache..
Then go to settings >system >quick pulldown and go to tiles and layout option and add your desired tiles..
Sent from my GT-I9070 using xda app-developers app
Will I get the RAM manager in that nightly build? Or is there a way to get it in the current build too?
do I need to flash gapps too.
If yes which one.
Fusion_RIP said:
Will I get the RAM manager in that nightly build? Or is there a way to get it in the current build too?
Click to expand...
Click to collapse
There is no ram manager
In cm and there's no need as apps get killed by swiping then from long pressing the home button..
hallebaaz said:
do I need to flash gapps too.
If yes which one.
Click to expand...
Click to collapse
Gapps usually the latest one..
I flashed it once several nightlies ago and since then didn't flashed them
Sent from my GT-I9070 using xda app-developers app
One More Question How Well Does Games Run on it.
and i mean heavy games like real football virual tennis gta etc.
hallebaaz said:
One More Question How Well Does Games Run on it.
and i mean heavy games like real football virual tennis gta etc.
Click to expand...
Click to collapse
All run flawless..
Sent from my GT-I9070 using xda app-developers app
Thnx A Lot Man.. U have helped a lot.
Just one final question.. Is there a stable version for s advance. Cause i have heard the nightlies have quite a lot of bugs.
hallebaaz said:
Thnx A Lot Man.. U have helped a lot.
Just one final question.. Is there a stable version for s advance. Cause i have heard the nightlies have quite a lot of bugs.
Click to expand...
Click to collapse
Not yet. But i believe soon will get a stable.
den is there any particular nighty u would advice.
hallebaaz said:
den is there any particular nighty u would advice.
Click to expand...
Click to collapse
The 15/09 nightly is the best ever I have used and recommend it to every one
Sent from my GT-I9070 using xda app-developers app
---------- Post added at 04:25 PM ---------- Previous post was at 04:24 PM ----------
hallebaaz said:
Thnx A Lot Man.. U have helped a lot.
Just one final question.. Is there a stable version for s advance. Cause i have heard the nightlies have quite a lot of bugs.
Click to expand...
Click to collapse
Thnx bud' for thanking just press the button and "mention not"
Sent from my GT-I9070 using xda app-developers app
Related
Which jb rom is the most stable and smooth now?
Sent from my LG-P970 using xda premium
mmryeu said:
Which jb rom is the most stable and smooth now?
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
CM10 latest nightly
sekhar13515 said:
CM10 latest nightly
Click to expand...
Click to collapse
@sekhar, what firmware are you using?? V20... ?
Aokp build 5 stable so far personal exp
Sent from my LG Optimus Black using xda premium
All jelly bean rom are not for daily use
Bad battery drain, sod, fc, BT not work correctly, etc
Im using akop build 5 jb rom n I dint face such prb which u mentioning below
Sent from my LG Optimus Black using xda premium
dare14 said:
Im using akop build 5 jb rom n I dint face such prb which u mentioning below
Sent from my LG Optimus Black using xda premium
Click to expand...
Click to collapse
CM10 (can't remember which nightly I used) doesn't have those problems either.
Apparently ShenduOS is also really good. I haven't had time to test it yet.
Mini Franki said:
All jelly bean rom are not for daily use
Bad battery drain, sod, fc, BT not work correctly, etc
Click to expand...
Click to collapse
you obviously dont know how to use the phone. latest cm10 nightly dont have that bugs, maybe the battery drain but it depends on how you use the phone but my experience with any gb roms specially stock is the same battery life with cm10, so everyone can use it now as a daily driver aside from you caveman who dont know how to use your ob.
xonar_ said:
CM10 (can't remember which nightly I used) doesn't have those problems either.
Apparently ShenduOS is also really good. I haven't had time to test it yet.
Click to expand...
Click to collapse
nightly from 20121111 or 20121114 have an exelent battery duration, the only issues that I had so far, is GPS takes around 10 minutos to lock a satelite, and the camera crashes every time you try to record a video, photos works great
Does som1 has the problem that the softkeys aren't working?? i did all 3 wipes but they still don't work
Can you guys please tell me what firmware (KDZ/AP+CP) you are using?? or is it a hardware issue??
When using CWM or CynMod7 (boype's) they respond great, but using cm10 they don't work at all (not responding, lights are on!)
I had the same issue and solved formating /system. I'm using RR JB v3.
Regards,
Sent from my GT-N7000 using xda premium
Darkwatch321 said:
@sekhar, what firmware are you using?? V20... ?
Click to expand...
Click to collapse
CM10 14th nightly..
for good results, do full wipe (3 wipes)
crmoreira said:
I had the same issue and solved formating /system. I'm using RR JB v3.
Regards,
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Just format system from CWM? and then reflash a stock rom and a cutom rom??
I think nightly 11.16. my daily rom
Darkwatch321 said:
Just format system from CWM? and then reflash a stock rom and a cutom rom??
Click to expand...
Click to collapse
Doesn't make much sense, if you flash a stock ROM you need to root first to flash a custom ROM and if you want a custom ROM why flash a stock ROM first?
Hello forum users
can anyone share a recent lag fix for my i9000 please?
i rooted my device and i have got Busybox 1.17.1
kindly regards,
stepan12
Hey,
First update your busybox, and if you doesn't matter, I would recommend you to change to a custom Rom. I'm from the i9001 but I'm sure that in the development forum of the s1 are a lot of tweaks for GB. If not look into the i9001 forum
Sent from the Internet
android_smiley said:
Hey,
First update your busybox, and if you doesn't matter, I would recommend you to change to a custom Rom. I'm from the i9001 but I'm sure that in the development forum of the s1 are a lot of tweaks for GB. If not look into the i9001 forum
Sent from the Internet
Click to expand...
Click to collapse
i dont want a custom rom i just want a lag fix..
For my experience, stock ROM sucks and always lag. Ever since I updated mine to Supernexus 2.0 M1 ROM, my phone is just as stable as Nexus 4.
No joke. Do it to believe. If you don't wanna do, then hard reset your phone and format the entire drive. Should be pack with a lot temp files and caches.
Sent from my GT-I9000 w/ Supernexus M1 rom using xda app-developers app
kickurasss said:
For my experience, stock ROM sucks and always lag. Ever since I updated mine to Supernexus 2.0 M1 ROM, my phone is just as stable as Nexus 4.
No joke. Do it to believe. If you don't wanna do, then hard reset your phone and format the entire drive. Should be pack with a lot temp files and caches.
Sent from my GT-I9000 w/ Supernexus M1 rom using xda app-developers app
Click to expand...
Click to collapse
which rom has a lag fix? and if i install is my device the same? i mean the theme etc etc..?
You don't need to install a custom rom. Speedmod kernel should be what you're looking for.
http://forum.xda-developers.com/showthread.php?t=1044519
Sent from my GT-P7510
stepan12 said:
i dont want a custom rom i just want a lag fix..
Click to expand...
Click to collapse
U didn't read everything what i wrote - i said that there are some tweaks that work on GB just open ur eyes! for GB i can recommend wolfscript, look in the i9001 forum
Sent from the Internet
Soryuu said:
You don't need to install a custom rom. Speedmod kernel should be what you're looking for.
http://forum.xda-developers.com/showthread.php?t=1044519
Sent from my GT-P7510
Click to expand...
Click to collapse
thanks i was looking for that
Soryuu said:
You don't need to install a custom rom. Speedmod kernel should be what you're looking for.
http://forum.xda-developers.com/showthread.php?t=1044519
Sent from my GT-P7510
Click to expand...
Click to collapse
benchmark score (1300+)
i expected no lag while i play some games :/
same **** as before
any suggestions?
Hi there everybody
first of all i wanna thank you for this amazing Site and Forum.....i really like it and appreciate your efforts here
so my story is simple.....
as you all know that JB 4.1.2 is out for a while now.....but in my country it's not available until now so i decided to update manually
and it work really.....i used the 4.1.2 XXLQG version (don't now if this is the most stable or not)
but after updating my mobile is lagging like hell and freezes when running a game or any heavy apps
so i don't know what to do???.....is this ver of JB not Stable or something??....
if there is any whay to help me it'll be great....
thank You all
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
phyowaiummg said:
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
thanks alot for the reply.....but i'm abit of a noob at android can you tell me how to do that
ok i've done the first step but what is (Flash CoCore E 7.2 kernel ) ?
sorry but like i said i'm new to android
totta_fadil said:
thanks alot for the reply.....but i'm abit of a noob at android can you tell me how to do that
ok i've done the first step but what is (Flash CoCore E 7.2 kernel ) ?
sorry but like i said i'm new to android
Click to expand...
Click to collapse
Root your JB and use universal kernel flash app to update to cocore 7.2. It is an zip you can unpack and use the bin file in the ukf app, then reboot
Sent from my GT-I9070 using xda app-developers app
Phoneboot said:
Root your JB and use universal kernel flash app to update to cocore 7.2. It is an zip you can unpack and use the bin file in the ukf app, then reboot
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
so i need to root my device?
is it dangerous?
and the steps....is it here in the forum?
and also what is the advantage of "this" (cocore7.2)
Use this guide for all...
http://forum.xda-developers.com/showthread.php?t=2198341
Sent from my CM10.1
R_a_z_v_a_n said:
Use this guide for all...
http://forum.xda-developers.com/showthread.php?t=2198341
Sent from my CM10.1
Click to expand...
Click to collapse
thanks alot guys for the help.....it works fine now
just another question not related to this post
can i now (my phone is rooted).......put games data in my Sd card
I cant flash SGA XXLQG
phyowaiummg said:
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
Hello,
I was trying to flash CoCore E 7.2 in recovery, but after start, there was a problem and there was sign: signature verification failed.
I have installed XXLQG on SGA, and i isnt work corrcetly, there are lags, it is really slowly and i am crazy of starting contact book and dialer. It takes 3 or 4 sec.
I dont know if flash repair it, i dont know. And I dont know why I cant flash CoCore E, CoCore + TWRP. Can anybody help me? I need faster phone.
Thanks
Root your phone first.
And dialer lag its a known bug. Use exDialer from market.
Powered by CM10.1
R_a_z_v_a_n said:
Root your phone first.
Powered by CM10.1
Click to expand...
Click to collapse
It is rooted. Why I cant flash kernel?
Sig verification is on stock recovery. Unzip kernel file and flash kernel md5 file using universal kernel flasher.
Sent from my SGS Adv. using xda-developers app.
th3cr0w said:
Sig verification is on stock recovery. Unzip kernel file and flash kernel md5 file using universal kernel flasher.
Sent from my SGS Adv. using xda-developers app.
Click to expand...
Click to collapse
It is ok now, thanks, for your help
what do you mean by ok
tino26 said:
It is ok now, thanks, for your help
Click to expand...
Click to collapse
what do you mean by ok?
Were you able to update the kernel?
After updating kernel is the phone working fast and normal? Is the dialer lag gone?
What is your current kernel then?
and
What is your current ROM?
You also have to disable signature verification in recovery mode, That should do the trick.
Sent from my GT-I9070 using xda app-developers app
Name your current KERNEL & ROM please
totta_fadil said:
thanks alot guys for the help.....it works fine now
just another question not related to this post
can i now (my phone is rooted).......put games data in my Sd card
Click to expand...
Click to collapse
Could you tell me what your current KERNEL is?
Could you tell me what your current ROM is?
Everything running smooth with this combination?
tino26 said:
It is rooted. Why I cant flash kernel?
Click to expand...
Click to collapse
Delete
phyowaiummg said:
Did u factory reset and wipe cache after upgrading? If not do it. LQG is good. Flash CoCore E 7.2 kernel and feel the smoothness.
Sent from my GT-I9070 using xda premium
Click to expand...
Click to collapse
I have I9070JVMD1 and stock kernel.
It lags a lot especially the dialer.
also, while playing long video the device goes into coma - I mean it becomes non-responsive.
If I flash CoCore 7.2 kernel should I get rid of the lags?
Nishad1982 said:
I have I9070JVMD1 and stock kernel.
It lags a lot especially the dialer.
also, while playing long video the device goes into coma - I mean it becomes non-responsive.
If I flash CoCore 7.2 kernel should I get rid of the lags?
Click to expand...
Click to collapse
If you flashed the kernel, the lags won't magically disappear but it is considerably reduced because the lags in dialer/camera/contacts are samsung's fault.
Sent from my GT-I9070 using xda app-developers app
tino26 said:
It is rooted. Why I cant flash kernel?
Click to expand...
Click to collapse
-Deleted-
Nishad1982 said:
what do you mean by ok?
Were you able to update the kernel?
After updating kernel is the phone working fast and normal? Is the dialer lag gone?
What is your current kernel then?
and
What is your current ROM?
Click to expand...
Click to collapse
I´ve updated kerner with universal kelner flasher. Yes phone is faster and i am using exdialer. It is better than original samsung dialer, mainly faster.
I´m using CoCore E 7.5 and XXLQG.
Hey guys,I was checking the stable cm updates for my gti9000 and I found a new cm snapshot...what is it?..if its worth updating then how can I update it..m currently on cm 10.1.3 RC2...?thanks ))
Sent from my GT-I9000 using xda app-developers app
hotboyburnz said:
Hey guys,I was checking the stable cm updates for my gti9000 and I found a new cm snapshot...what is it?..if its worth updating then how can I update it..m currently on cm 10.1.3 RC2...?thanks ))
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
Just download the snapshot ROM and gapps .
And flash it the same way you flashed cm10.1.3 RC3
have a nice day
The next Version of CM 10.1.3. is the pure stable version ,right?
I don`t see any RC3 in the download portal of CM...last RC is the second one ...
So i think this is the stable-version which you have ,right?
Flashing the same way you always flash a version ...
With CM10.2 you should have about 40% longer battery life and faster phone.
Latest nightlies work perfectly fine for me. Download rom zip, gapps for 4.3x/cm10.2, run your i9000 in recovery mode, wipe all (factory reset/data, cache, dalvik cache) flash rom zip twice (first time it will just warn you that system repartitions are different), then flash gapps while still in recovery, reboot, wait until the system and all apps get upgraded, log on your google account and enjoy.
If your apps now are synced with your google account, you'll have all of them automatically downloaded short after running the CM10.2
Have you flashed to CM 10.2 ??? And what is your opinion about it ...:good:
hotboyburnz said:
Hey guys,I was checking the stable cm updates for my gti9000 and I found a new cm snapshot...what is it?..if its worth updating then how can I update it..m currently on cm 10.1.3 RC2...?thanks ))
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
freakymod2120 said:
Have you flashed to CM 10.2 ??? And what is your opinion about it ...:good:
Click to expand...
Click to collapse
No ROM can be compared to CyanogenMod..they r the best....10.2 is also pretty great...performance is slight better from earlier ROM but battery is frickin awesome ..
20-30% increase in battery!!
Sent from my GT-I9505 using xda app-developers app
Nice to hear ...:good:
But the battery drain is a prob ...i don`t have this issue ,what nightly do you use???
Whats about the battery consumption in the battery-consumer-menu? Any apps eating so much battery like google now or something???
For me it is working great ...
hotboyburnz said:
No ROM can be compared to CyanogenMod..they r the best....10.2 is also pretty great...performance is slight better from earlier ROM but battery is frickin awesome ..
20-30% increase in battery!!
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Hi all, i am going on holidays in a week and i need my phone. I want to return to 4.1.2 jelly bean but i am afraid that it freezes when i need it the most. I am currently on t4n017 latest build but there is this annoying bug of screen flashing all the time.
1.Which cocafe's kernel should i use to have a stable and bug free rom?
2. If u suggest a custom rom, which one and y?
Thanks a lot
Sent from my GT-I9070 using XDA Free mobile app
Patlcs said:
Hi all, i am going on holidays in a week and i need my phone. I want to return to 4.1.2 jelly bean but i am afraid that it freezes when i need it the most. I am currently on t4n017 latest build but there is this annoying bug of screen flashing all the time.
1.Which cocafe's kernel should i use to have a stable and bug free rom?
2. If u suggest a custom rom, which one and y?
Thanks a lot
Sent from my GT-I9070 using XDA Free mobile app
Click to expand...
Click to collapse
One tip, put max background apps to 1 or 2. Try SamiOS for example. For kernel, I used latest CoCore - it was ok.
sent pm
@shut_down what rom are u currently using?
Sent from my GT-I9070 using XDA Free mobile app
Chirag's latest PA build, even though is not up to date with the official verison, works very well, especially when paired with apps like myandroidtools( link)
or greenify.
Patlcs said:
@shut_down what rom are u currently using?
Sent from my GT-I9070 using XDA Free mobile app
Click to expand...
Click to collapse
CM10.1, 1117 with 1119 phone.apk.
shut_down said:
CM10.1, 1117 with 1119 phone.apk.
Click to expand...
Click to collapse
I plan to install it, too. Can I simply apply zip from twrp? I'm currently on vanir kitkat.
jazzh said:
I plan to install it, too. Can I simply apply zip from twrp? I'm currently on vanir kitkat.
Click to expand...
Click to collapse
Probably yes. If you fail you can always flash stock JB and then install CM10.1.
Remember that you need to do factory reset after install of another ROM, to avoid getting into a bootloop.
shut_down said:
CM10.1, 1117 with 1119 phone.apk.
Click to expand...
Click to collapse
Where can i download 1119 ROM?