HELP- i cant turn back - One (M7) Q&A, Help & Troubleshooting

Hi Guys
i acquired a few days ago a new cell
ONE HTC m7 32GB
with these characteristics
m7_ul pvt ship s0ff rh
MID : PN07120
CID-BS_US001
Hboot 1.44.0000
open dsp v 26.120.274.0202
emm boot
but.... i upgrade to the European version (to update to 4.2.2)
PN0710000
changing the
CID to PN0710000 and MID to HTC__304
before I realized the problem of the camera (blurring and noise at night)
and thought it was normal.
now I want to go back and can not find the official firmware anywhere
now im in 4.2.2
Pleas Help me!

CID should be HTC__001 and MID PN0710000
Then get the 1.28.401.7 RUU and flash that and then get the OTAs to get to 2.24.401.8 and you're good to go

EddyOS said:
CID should be HTC__001 and MID PN0710000
Then get the 1.28.401.7 RUU and flash that and then get the OTAs to get to 2.24.401.8 and you're good to go
Click to expand...
Click to collapse
but my Original data are exept SOFF
m7_ul pvt ship s0ff rh
MID : PN07120
CID-BS_US001
Hboot 1.44.0000
open dsp v 26.120.274.0202
emm boot

isma907 said:
but my Original data are exept SOFF
m7_ul pvt ship s0ff rh
MID : PN07120
CID-BS_US001
Hboot 1.44.0000
open dsp v 26.120.274.0202
emm boot
Click to expand...
Click to collapse
flash original RUU and you are ok. keep s-off , is a good thing
in fastboot : fastboot oem writecid BS_US001
fastboot oem writemid PN07120

criszz said:
flash original RUU and you are ok. keep s-off , is a good thing
in fastboot : fastboot oem writecid BS_US001
fastboot oem writemid PN07120
Click to expand...
Click to collapse
the problem is that:
I cant find my firmware version / and i am NOOBie to HTC come from Samsung
for that reason i need more details XD (would be very grateful)
who is my official RUU? in this case?

isma907 said:
the problem is that:
I cant find my firmware version / and i am NOOBie to HTC come from Samsung
for that reason i need more details XD (would be very grateful)
who is my official RUU? in this case?
Click to expand...
Click to collapse
you can do fastboot comand and set your cid/mid at ant time without stock ruu, but look here, you will find right ruu >> http://forum.xda-developers.com/showthread.php?p=39588860

criszz said:
you can do fastboot comand and set your cid/mid at ant time without stock ruu, but look here, you will find right ruu >> http://forum.xda-developers.com/showthread.php?p=39588860
Click to expand...
Click to collapse
my model is not on the list you say

isma907 said:
my model is not on the list you say
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=40672030&postcount=6

criszz said:
http://forum.xda-developers.com/showpost.php?p=40672030&postcount=6
Click to expand...
Click to collapse
sorry for my ignorance
but i dont know who is my model i read the list but is not here
could you give me, what would be my model in this case? sorry for disturb
my htc is not 64gb ... is a 32Gb.. this worK?

BS_US001 is the Dev Edition; if that was original CID before you did anything, then the Dev Edition RUU is what you want!

wmg316 said:
BS_US001 is the Dev Edition; if that was original CID before you did anything, then the Dev Edition RUU is what you want!
Click to expand...
Click to collapse
SO... first i need to flash the RUU
and later write CID AND MID?

isma907 said:
SO... first i need to flash the RUU
and later write CID AND MID?
Click to expand...
Click to collapse
The RUU checks cid and mid for compatibility. The only reason you are changing them is to flash the RUU.
AT&T HTC M7ul
Baad Newz's InsertCoin 3.4-2
Flar2's Bulletproof 6.2

Related

Flash latest FIRMWARE on MY HTC One

Hi,
to flash this firmware I need a specific CID?
[HTC ONE M7] Newest Firmware 4.06.1540.2 with modified HBOOT, (No Red warning)
Are you s-off? you need s-off to use any modified hboot. with s-off you can easily go super CID and never worry about CID again.
EaglesGPC said:
Hi,
to flash this firmware I need a specific CID?
[HTC ONE M7] Newest Firmware 4.06.1540.2 with modified HBOOT, (No Red warning)
Click to expand...
Click to collapse
Device: HTC One Silver 32gb
Operatore: H3G
Recovery: TWRP 2.6.3.3
Rom: ViperOne 3.1.0 RC2
Kernel: ElementalX-m7-8.1
S-Off & UnLocked
CID: HTC__405
HTBoot: 1.55.0000
Radio: 4A.21.3263.04
OpenDSP: v32.120.274.0909
Firmware: 3.62.401.1
Trimmed the list to the only stuff that matters in this case. you're s-off so your mostly good to go.
fastboot oem writecid 11111111
that will give you super CID and allow you to install any RUU or firmware package.
EaglesGPC said:
Device: HTC One Silver 32gb
S-Off & UnLocked
CID: HTC__405
HTBoot: 1.55.0000
Radio: 4A.21.3263.04
Firmware: 3.62.401.1
Click to expand...
Click to collapse
ipfreelytech said:
Trimmed the list to the only stuff that matters in this case. you're s-off so your mostly good to go.
fastboot oem writecid 11111111
that will give you super CID and allow you to install any RUU or firmware package.
Click to expand...
Click to collapse
I'm Italian and I use google translate
this is my signature on an Italian forum on android :angel:

[Q] GPe to Sense

Hello members of XDA,
I ran into a problem trying to restoring my Htc One back to sense version, it sais on the conversion thread that I should have a backup of my original Hboot, which I do not have. I don't know if that's a problem, i downloaded the 1.44 hboot as I guess that's the one I should use to get back to stock. As of now I have S off, and am on hboot 1.54 and on official GPE.
Now comes the part where I'm stuck, I do not know what kind of RUU I need to return to stock, I know I need the hboot 1.44 one but I don't want any problems with bloatware or flashing a wrong baseband etc. Can anyone point me in the right direction of the right RUU? To be sure I'm pasting a getvar all
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main: 3.62.1700.1
version-misc: PVT SHIP S-OFF
serialno: xxxx
imei: xxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4014mV
partition-layout: Generic
security: off
Stefan0vic said:
Hello members of XDA,
I ran into a problem trying to restoring my Htc One back to sense version, it sais on the conversion thread that I should have a backup of my original Hboot, which I do not have. I don't know if that's a problem, i downloaded the 1.44 hboot as I guess that's the one I should use to get back to stock. As of now I have S off, and am on hboot 1.54 and on official GPE.
Now comes the part where I'm stuck, I do not know what kind of RUU I need to return to stock, I know I need the hboot 1.44 one but I don't want any problems with bloatware or flashing a wrong baseband etc. Can anyone point me in the right direction of the right RUU? To be sure I'm pasting a getvar all
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main: 3.62.1700.1
version-misc: PVT SHIP S-OFF
serialno: xxxx
imei: xxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4014mV
partition-layout: Generic
security: off
Click to expand...
Click to collapse
well all your getvar really shows is yes you converted to GPE
what was the phone before you converted it ? CID - MID and version-main
clsA said:
well all your getvar really shows is yes you converted to GPE
what was the phone before you converted it ? CID - MID and version-main
Click to expand...
Click to collapse
Thank god I saved that all in a word document,
Well my Cid was HTC__E11 it is now supercid, the version main was 4.19.401.11
my model ID was and still is PN0710000
Stefan0vic said:
Thank god I saved that all in a word document,
Well my Cid was HTC__E11 it is now supercid, the version main was 4.19.401.11
my model ID was and still is PN0710000
Click to expand...
Click to collapse
Then download this
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
change you CID back with fastboot
fastboot oem writecid HTC__E11
here's the 1.44 hboot >> https://www.dropbox.com/s/xyqurk33yh409bi/orig_hboot_1.44.0000_M7_RUUmode.zip
flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip <name of hboot>.zip
fastboot reboot
then run the RUU .exe you should be back to almost stock
clsA said:
Then download this
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
change you CID back with fastboot
fastboot oem writecid HTC__E11
here's the 1.44 hboot >> https://www.dropbox.com/s/xyqurk33yh409bi/orig_hboot_1.44.0000_M7_RUUmode.zip
flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip <name of hboot>.zip
fastboot reboot
then run the RUU .exe you should be back to almost stock
Click to expand...
Click to collapse
Thank you so much,
Why do so many threads advice to run 1.44 RUU though? After this I will have 1.44 hboot with android 4.4.2?
Edit: Download is taking aprox 2-3 hrs. Is there any way I can download it a little bit faster?
Stefan0vic said:
Thank you so much,
Why do so many threads advice to run 1.44 RUU though? After this I will have 1.44 hboot with android 4.4.2?
Edit: Download is taking aprox 2-3 hrs. Is there any way I can download it a little bit faster?
Click to expand...
Click to collapse
try here
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
and no you have hboot 1.56 after the RUU step
the hboot 1.44 insures the RUU will work smoothly
it's also a vital step if you want to remove tampered and show locked instead of relocked
to return for repair
clsA said:
try here
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Click to expand...
Click to collapse
Saw you edited your post, thank you so much
Stefan0vic said:
I'll just keep my pc on for a bit Thank you so much for your help.
Just 1 more question, will my bootloader be updated with the RUU itself? I need the phone as much stock possible since I need to give it for warranty for camera replacement.
Click to expand...
Click to collapse
now we are getting somewhere
before running the RUU you have more work then
you have to remove the tampered flag and lock before running the RUU
use this tool to do both >> http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/
from @nkk71 SuperGuide
Method 2: Guru Bootloader Reset, more automated, but may freeze
adb push Guru_Bootloader_Reset_1.0.zip /data/media/
in recovery, "install zip" -> "choose zip" -> and select "Guru_Bootloader_Reset_1.0"
go through the installer and select "Remove TAMPERED" and "LOCK Bootloader"; once finished: continue with below reboot command
adb reboot bootloader
and confirm no TAMPERED and LOCKED status
Click to expand...
Click to collapse
clsA said:
now we are getting somewhere
before running the RUU you have more work then
you have to remove the tampered flag and lock before running the RUU
use this tool to do both >> http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/
from @nkk71 SuperGuide
Click to expand...
Click to collapse
I dont have the tampered flag so i guess i dont have to do that,
I will use that to get my bootloader locked though, thank you. RUU is still downloading as we speak but I can almost run it
So its:
1. Flash hboot
2. lock bootloader
3. run RUU?
Help!! It returns me with an image fault!!
Error: 158 !
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Stefan0vic said:
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Click to expand...
Click to collapse
don't panic .. just use a different ruu
clsA said:
don't panic .. just use a different ruu
Click to expand...
Click to collapse
I'm trying, I just don't know which one since I can't find an RUU that matches my radio
Stefan0vic said:
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Click to expand...
Click to collapse
ERROR [110]: FILE OPEN ERROR
This error message indicates that the RUU lacks some specific files or they are damaged, so the RUU cannot continue with the update. You have to get the complete RUU package and try again.
ERROR [120]: MAIN BATTERY POWER
This error message will appear when the Android phone’s battery power is not sufficient (Batter power should be more than 30%). Although RUU will instruct you to plug in the AC adapter, it will still need to make sure that your Android phone has enough power to complete the update. (The Android phone cannot charge the battery when it is connected to the PC while installing the RUU).
ERROR [130]: MODEL ID ERROR
ERROR [131]: CUSTOMER ID ERROR
One of these error messages will appear when you use the wrong RUU to do the update. The RUU will check if the Model ID and Language ID are compatible with the Android phone. Make sure you use the correct RUU to update.
ERROR [155~159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
ERROR [170]: USB CONNECTION ERROR
This error message will appear when the Android phone is not correctly connected to the host PC. It might be a USB connection problem or a PC USB driver problem. Make sure the Android phone is connected to the host PC correctly and/or check if the PC driver matches the Android phone.
Sent from my HTC One using XDA Premium 4 mobile app
I know what the error means, but I don't know what RUU I need, i thought it accepted everything since I was s off
Stefan0vic said:
I'm trying, I just don't know which one since I can't find an RUU that matches my radio
Click to expand...
Click to collapse
did you change your CID ?
if so put it back to supercid and try
also did you md5 check your download
did you flash the 1.44 hboot ?
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
File Size: 1.5 GiB - Downloads: 69507
MD5: 9ad4111ce86981e3dffcce6d9ee80551
Comments: modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
Click to expand...
Click to collapse
after 69,000 plus downloads you think someone would report if it's a bad file
clsA said:
did you change your CID ?
if so put it back to supercid and try
also did you md5 check your download
did you flash the 1.44 hboot ?
after 69,000 plus downloads you think someone would report if it's a bad file
Click to expand...
Click to collapse
Yes I flashed the 1.44 HBOOT,
can I flash supercid with relocked bootloader?
I'll try another RUU in a bit. Does it matter that radio's dont match?
Stefan0vic said:
Yes I flashed the 1.44 HBOOT,
can I flash supercid with relocked bootloader?
I'll try another RUU in a bit. Does it matter that radio's dont match?
Click to expand...
Click to collapse
if you locked the bootloader all you can't do is flash a recovery (I think ? )
for a RUU all your really interested in is the x.xx.401.x part
clsA said:
if you locked the bootloader all you can't do is flash a recovery (I think ? )
for a RUU all your really interested in is the x.xx.401.x part
Click to expand...
Click to collapse
Tried another .401. ruu and its now giving usb error..
I have no idea what im doing wrong. Should HTC Sync be installed for this?
Stefan0vic said:
Tried another .401. ruu and its now giving usb error..
I have no idea what im doing wrong. Should HTC Sync be installed for this?
Click to expand...
Click to collapse
well if you flashed the 1.44 hboot your pc must work in fastboot
what state is the phone in when you run the RUU ? bootloader / recovery / Android OS ?

stock using RUU - Help

hello, imma cut it short :
i have an m7_u, i want to go back to stock , so i can update the phone, so it updates my firmware by itself ( no flashing manual cuz i dnt want to risk a brick.. here's my getvar :
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.25.599.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3742mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e0349bfc
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
i want to use the simpe method, ruu.exe
how to know my ruu ?
what do i need to do before running the ruu ? like , lock bootloader , go back s-on ? anything ?
any help is apretiated , thanks alot !
ali-k95 said:
hello, imma cut it short :
i have an m7_u, i want to go back to stock , so i can update the phone, so it updates my firmware by itself ( no flashing manual cuz i dnt want to risk a brick.. here's my getvar :
i want to use the simpe method, ruu.exe
how to know my ruu ?
what do i need to do before running the ruu ? like , lock bootloader , go back s-on ? anything ?
any help is apretiated , thanks alot !
Click to expand...
Click to collapse
like said in your other thread, there is no RUU for .599 version.
NEVER go back s-on
you don't need to lock the bootloader to use a RUU because you have S-OFF
just make sure both your CID and MID match the ruu you want to use, if not you can change both of these values, thanks to S-OFF.
alray said:
like said in your other thread, there is no RUU for .599 version.
NEVER go back s-on
you don't need to lock the bootloader to use a RUU because you have S-OFF
just make sure both your CID and MID match the ruu you want to use, if not you can change both of these values, thanks to S-OFF.
Click to expand...
Click to collapse
Can you send me a link to the ruu ? and how to know to what cid and mid i shoud change ?
can it be more like
1-..
2-...
3-... steps ? thankss
ali-k95 said:
Can you send me a link to the ruu ?
Click to expand...
Click to collapse
You have s-off which mean you can use every ruu intended for M7_UL or M7_U phones.
http://www.htc1guru.com/
and how to know to what cid and mid i shoud change ?
Click to expand...
Click to collapse
CID and MID must match the ruu you will use.
i.e, if you want to use a .401 ruu, cid should be HTC__001 and MID PN0710000
if you want to use dev eidtion, cid: BS_US001 mid: PN0712000
etc
etc
can it be more like
1-..
2-...
3-... steps ?
Click to expand...
Click to collapse
choose the ruu.exe or ruu.zip you want to use
does your cid match the ruu you want to use? yes go to next step, no: change your cid
Code:
fastboot oem writecid <insert correct cid here>
fastboot reboot-bootloader
does your mid match the ruu you want to use? yes: go to next step, no:change your mid
flash the ruu.exe or ruu.zip
ruu.exe ---> lauch the .exe and follow instructions
ruu.zip ---->
Code:
fastboot oem rebootRUU
fastboot flash zip name_of_ruu.zip
fastboot flash zip name_of_ruu.zip
fastboot reboot
alray said:
You have s-off which mean you can use every ruu intended for M7_UL or M7_U phones.
http://www.htc1guru.com/
CID and MID must match the ruu you will use.
i.e, if you want to use a .401 ruu, cid should be HTC__001 and MID PN0710000
if you want to use dev eidtion, cid: BS_US001 mid: PN0712000
etc
etc
choose the ruu.exe or ruu.zip you want to use
does your cid match the ruu you want to use? yes go to next step, no: change your cid
Code:
fastboot oem writecid <insert correct cid here>
fastboot reboot-bootloader
does your mid match the ruu you want to use? yes: go to next step, no:change your mid
flash the ruu.exe or ruu.zip
ruu.exe ---> lauch the .exe and follow instructions
ruu.zip ---->
Code:
fastboot oem rebootRUU
fastboot flash zip name_of_ruu.zip
fastboot flash zip name_of_ruu.zip
fastboot reboot
Click to expand...
Click to collapse
This is what i'm talking about !
so , is this okaii ?
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
Click to expand...
Click to collapse
if that's not a good one , give me a link or something ?
Comments: modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
Click to expand...
Click to collapse
i can choose whatever cid of those , and just that 1 MID , and change my phone's to them , run ruu , the phone is stock , i get an update , udpate it , firmware is updated , and then unlock bootloader again ( in case it relocks by itself due to ruu ) , flash recovery , flash rom again.. is that right ?
ali-k95 said:
This is what i'm talking about !
so , is this okaii ?
if that's not a good one , give me a link or something ?
i can choose whatever cid of those , and just that 1 MID , and change my phone's to them , run ruu , the phone is stock , i get an update , udpate it , firmware is updated , and then unlock bootloader again ( in case it relocks by itself due to ruu ) , flash recovery , flash rom again.. is that right ?
Click to expand...
Click to collapse
the ruu you have linked have PN0710000 and yours is PN0711000, so you'll need to change your mid to use that one. Follow the guide to change mid, its pretty easy to do. Yes you can choose whater cid of those but i'll recommend you to use HTC__001 (don't forget its 2 underscore __ 8 characters total). The bootloader will not relocks by itself
alray said:
the ruu you have linked have PN0710000 and yours is PN0711000, so you'll need to change your mid to use that one. Follow the guide to change mid, its pretty easy to do. Yes you can choose whater cid of those but i'll recommend you to use HTC__001 (don't forget its 2 underscore __ 8 characters total). The bootloader will not relocks by itself
Click to expand...
Click to collapse
Alright , so imma change MID and CID then just run the ruu
downloading it right now , might take a while.. thanks ! i'll re post any new things
alray said:
the ruu you have linked have PN0710000 and yours is PN0711000, so you'll need to change your mid to use that one. Follow the guide to change mid, its pretty easy to do. Yes you can choose whater cid of those but i'll recommend you to use HTC__001 (don't forget its 2 underscore __ 8 characters total). The bootloader will not relocks by itself
Click to expand...
Click to collapse
everything is done ! i changed MID and CID to PN0710000 & HTC__001 respectivly .. now all i have to do is download the ruu i posted and run it right ?
alray said:
the ruu you have linked have PN0710000 and yours is PN0711000, so you'll need to change your mid to use that one. Follow the guide to change mid, its pretty easy to do. Yes you can choose whater cid of those but i'll recommend you to use HTC__001 (don't forget its 2 underscore __ 8 characters total). The bootloader will not relocks by itself
Click to expand...
Click to collapse
Okaii, so i have the ruu file, i ran it, htc went to silver htc screen , then it gave a 155 error.. What ?
( Note : phone is still okaii , nothing wrong happened )
ali-k95 said:
Okaii, so i have the ruu file, i ran it, htc went to silver htc screen , then it gave a 155 error.. What ?
( Note : phone is still okaii , nothing wrong happened )
Click to expand...
Click to collapse
Lock your bootloader, HTC ruu requires it, even if you are s-off
What I don't get is after you have updated your Rom, firmware, and hboot, you are then going to flash a custom Rom ??????
You are making things very difficult and complicated for yourself, just manually update your firmware.
Seanie280672 said:
Lock your bootloader, HTC ruu requires it, even if you are s-off
What I don't get is after you have updated your Rom, firmware, and hboot, you are then going to flash a custom Rom ??????
You are making things very difficult and complicated for yourself, just manually update your firmware.
Click to expand...
Click to collapse
the problem is that i read some people had bricks upgrading manually through firmware.zip files , so let the ruu make it for me , the ota , then i'll just unlock it again , flash custom recovery and custom rom .. ik it's complicated but i have no htc service here if i bricked my phone so yeah :/
Seanie280672 said:
Lock your bootloader, HTC ruu requires it, even if you are s-off
What I don't get is after you have updated your Rom, firmware, and hboot, you are then going to flash a custom Rom ??????
You are making things very difficult and complicated for yourself, just manually update your firmware.
Click to expand...
Click to collapse
EDIT : i relocked it and it's still not working . error 155 , i guess imma try now firmware.zip method ?
( i unlocked bootloader again , changed cid back to 11111111 .. what to do now with MID ? and can i go for this firmware fw_6.06.401.1_custom.zip
or should i use this fw_5.11.401.10_custom.zip ?
thanks.
EDIT : i opened firmware.zip and checked for the mid's, mine was there , so i did it and it went okaii
i'm updated now , thanks all for the help
just one more q. , can i updat fw_6.06.401.1_custom.zip ( i'm on fw_5.11.401.10_custom.zip ) if my ROM is still on fw_5.11.401.10_custom.zip ? thanks.
ali-k95 said:
EDIT : i relocked it and it's still not working . error 155 , i guess imma try now firmware.zip method ?
( i unlocked bootloader again , changed cid back to 11111111 .. what to do now with MID ? and can i go for this firmware fw_6.06.401.1_custom.zip
or should i use this fw_5.11.401.10_custom.zip ?
thanks.
EDIT : i opened firmware.zip and checked for the mid's, mine was there , so i did it and it went okaii
i'm updated now , thanks all for the help
just one more q. , can i updat fw_6.06.401.1_custom.zip ( i'm on fw_5.11.401.10_custom.zip ) if my ROM is still on fw_5.11.401.10_custom.zip ? thanks.
Click to expand...
Click to collapse
as your s-off you can upgrade and downgrade as you please, ive heard the radio file contained in the new firmware is the best to date.
Here's a handy one to add to your bookmarks: http://forum.xda-developers.com/showthread.php?t=2316726
NEVER S-ON, with the custom firmware's, if you s-on, you will have an instant brick due to the modded HBOOT.

[Q] Update HBOOT

Hi Dear Developers ,
i have a question :
my htc one Device is m7_U my CIDNum is HTC__J15
and my Modelid is PN0711000
and my BuildNumber in my custom rom is 6.09.401.5
my HBoot Version is 1.55
where I Can Found New Firmware For My m7 devices with my CIDNUM And MODELID ??
in the website revolution HD m7 in section firmware there is many item for 401 , Which one That i Should to flash
Quickly PLZ
HElP Fast if you Cann
armindelavari said:
HElP Fast if you Cann
Click to expand...
Click to collapse
Don't, just don't
you need to be patient
armindelavari said:
Hi Dear Developers ,
i have a question :
my htc one Device is m7_U my CIDNum is HTC__J15
and my Modelid is PN0711000
and my BuildNumber in my custom rom is 6.09.401.5 irrelavant, firmware version you get from a "fastboot getvar all"
my HBoot Version is 1.55
where I Can Found New Firmware For My m7 devices with my CIDNUM And MODELID ??
in the website revolution HD m7 in section firmware there is many item for 401 , Which one That i Should to flash
Click to expand...
Click to collapse
those wont work for you, those are for M7_UL (PN0710000).
if you are on hboot 1.55 then your firmware will be 3.xx.401.x
if you really want to change firmware, recommend you go s-off, then you can flash unsigned firmware... for hboot 1.55 rumrunner and or firewater should work nicely.
I personally use these firmwares: http://forum.xda-developers.com/showthread.php?t=2365506
nkk71 said:
Don't, just don't
you need to be patient
those wont work for you, those are for M7_UL (PN0710000).
if you are on hboot 1.55 then your firmware will be 3.xx.401.x
if you really want to change firmware, recommend you go s-off, then you can flash unsigned firmware... for hboot 1.55 rumrunner and or firewater should work nicely.
I personally use these firmwares: http://forum.xda-developers.com/showthread.php?t=2365506
Click to expand...
Click to collapse
Thanks But I want to update my Hboot to 1.57 , how can i install that ??
armindelavari said:
Thanks But I want to update my Hboot to 1.57 , how can i install that ??
Click to expand...
Click to collapse
a) either you go s-off and flash whatever you like
or
b) you need to find PN0711000 signed firmwares, and flash them incrementally
i recommend option a

[Q] Reseting HTC M7 to factory RUU checking headers at 7%

Hello!
I have been attempting to reset my HTC one M7 to stock factory setting for a while now. I have attempted this using many different RUU .exe files. With each i seem to be having the same occurrence. The phone will reboot and the HTC logo will appear on the screen. After this the bar on my computer screen will begin to move (the process begins) however it then gets stuck at 7% while it is 'checking headers' every time on every RUU .exe file i try. My phone is of course rooted with S-OFF, running android 4.2 and i have relocked the Bootloader, ready for the RUU file. This is probably going to be something small i haven't done, however i have been searching the internet for an answer for a few weeks now, and nothing seems to come up.
Any help would be great!
***TAMPERED***
***RELOCKED***
M7_UL PVT SHIP S-OFF RH
CID-ORANG001
HBOOT-1.55.0000
RADIO-4A.21.3263.04
OpenDSP-v32.120.274.0909
OS-
eMMC-boot 2048MB
Oct 21 2013, 22:50:54.0
CID and MID match ?
OS not showing that's problem
flash same firmware as ruu first
then run ruu
Post the output of ruu.log from C:\Ruulog\
yatindroid said:
CID and MID match ?
OS not showing that's problem
flash same firmware as ruu first
then run ruu
Click to expand...
Click to collapse
How do i view the MID?
Thanks for the help by the way.
archieoboyle said:
How do i view the MID?
Thanks for the help by the way.
Click to expand...
Click to collapse
fastboot getvar all
model id
yatindroid said:
CID and MID match ?
OS not showing that's problem
flash same firmware as ruu first
then run ruu
Click to expand...
Click to collapse
Just checked the CID and the MID, they are different,
CID: ORANG001
mid: PN0710000
What does this mean?
archieoboyle said:
Just checked the CID and the MID, they are different,
CID: ORANG001
mid: PN0710000
What does this mean?
Click to expand...
Click to collapse
now check RUU need which CID and MID ?
Change CID and MID according to that
Then run ruu

Categories

Resources