hello, imma cut it short :
i have an m7_u, i want to go back to stock , so i can update the phone, so it updates my firmware by itself ( no flashing manual cuz i dnt want to risk a brick.. here's my getvar :
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.25.599.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3742mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e0349bfc
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
i want to use the simpe method, ruu.exe
how to know my ruu ?
what do i need to do before running the ruu ? like , lock bootloader , go back s-on ? anything ?
any help is apretiated , thanks alot !
ali-k95 said:
hello, imma cut it short :
i have an m7_u, i want to go back to stock , so i can update the phone, so it updates my firmware by itself ( no flashing manual cuz i dnt want to risk a brick.. here's my getvar :
i want to use the simpe method, ruu.exe
how to know my ruu ?
what do i need to do before running the ruu ? like , lock bootloader , go back s-on ? anything ?
any help is apretiated , thanks alot !
Click to expand...
Click to collapse
like said in your other thread, there is no RUU for .599 version.
NEVER go back s-on
you don't need to lock the bootloader to use a RUU because you have S-OFF
just make sure both your CID and MID match the ruu you want to use, if not you can change both of these values, thanks to S-OFF.
alray said:
like said in your other thread, there is no RUU for .599 version.
NEVER go back s-on
you don't need to lock the bootloader to use a RUU because you have S-OFF
just make sure both your CID and MID match the ruu you want to use, if not you can change both of these values, thanks to S-OFF.
Click to expand...
Click to collapse
Can you send me a link to the ruu ? and how to know to what cid and mid i shoud change ?
can it be more like
1-..
2-...
3-... steps ? thankss
ali-k95 said:
Can you send me a link to the ruu ?
Click to expand...
Click to collapse
You have s-off which mean you can use every ruu intended for M7_UL or M7_U phones.
http://www.htc1guru.com/
and how to know to what cid and mid i shoud change ?
Click to expand...
Click to collapse
CID and MID must match the ruu you will use.
i.e, if you want to use a .401 ruu, cid should be HTC__001 and MID PN0710000
if you want to use dev eidtion, cid: BS_US001 mid: PN0712000
etc
etc
can it be more like
1-..
2-...
3-... steps ?
Click to expand...
Click to collapse
choose the ruu.exe or ruu.zip you want to use
does your cid match the ruu you want to use? yes go to next step, no: change your cid
Code:
fastboot oem writecid <insert correct cid here>
fastboot reboot-bootloader
does your mid match the ruu you want to use? yes: go to next step, no:change your mid
flash the ruu.exe or ruu.zip
ruu.exe ---> lauch the .exe and follow instructions
ruu.zip ---->
Code:
fastboot oem rebootRUU
fastboot flash zip name_of_ruu.zip
fastboot flash zip name_of_ruu.zip
fastboot reboot
alray said:
You have s-off which mean you can use every ruu intended for M7_UL or M7_U phones.
http://www.htc1guru.com/
CID and MID must match the ruu you will use.
i.e, if you want to use a .401 ruu, cid should be HTC__001 and MID PN0710000
if you want to use dev eidtion, cid: BS_US001 mid: PN0712000
etc
etc
choose the ruu.exe or ruu.zip you want to use
does your cid match the ruu you want to use? yes go to next step, no: change your cid
Code:
fastboot oem writecid <insert correct cid here>
fastboot reboot-bootloader
does your mid match the ruu you want to use? yes: go to next step, no:change your mid
flash the ruu.exe or ruu.zip
ruu.exe ---> lauch the .exe and follow instructions
ruu.zip ---->
Code:
fastboot oem rebootRUU
fastboot flash zip name_of_ruu.zip
fastboot flash zip name_of_ruu.zip
fastboot reboot
Click to expand...
Click to collapse
This is what i'm talking about !
so , is this okaii ?
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
Click to expand...
Click to collapse
if that's not a good one , give me a link or something ?
Comments: modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
Click to expand...
Click to collapse
i can choose whatever cid of those , and just that 1 MID , and change my phone's to them , run ruu , the phone is stock , i get an update , udpate it , firmware is updated , and then unlock bootloader again ( in case it relocks by itself due to ruu ) , flash recovery , flash rom again.. is that right ?
ali-k95 said:
This is what i'm talking about !
so , is this okaii ?
if that's not a good one , give me a link or something ?
i can choose whatever cid of those , and just that 1 MID , and change my phone's to them , run ruu , the phone is stock , i get an update , udpate it , firmware is updated , and then unlock bootloader again ( in case it relocks by itself due to ruu ) , flash recovery , flash rom again.. is that right ?
Click to expand...
Click to collapse
the ruu you have linked have PN0710000 and yours is PN0711000, so you'll need to change your mid to use that one. Follow the guide to change mid, its pretty easy to do. Yes you can choose whater cid of those but i'll recommend you to use HTC__001 (don't forget its 2 underscore __ 8 characters total). The bootloader will not relocks by itself
alray said:
the ruu you have linked have PN0710000 and yours is PN0711000, so you'll need to change your mid to use that one. Follow the guide to change mid, its pretty easy to do. Yes you can choose whater cid of those but i'll recommend you to use HTC__001 (don't forget its 2 underscore __ 8 characters total). The bootloader will not relocks by itself
Click to expand...
Click to collapse
Alright , so imma change MID and CID then just run the ruu
downloading it right now , might take a while.. thanks ! i'll re post any new things
alray said:
the ruu you have linked have PN0710000 and yours is PN0711000, so you'll need to change your mid to use that one. Follow the guide to change mid, its pretty easy to do. Yes you can choose whater cid of those but i'll recommend you to use HTC__001 (don't forget its 2 underscore __ 8 characters total). The bootloader will not relocks by itself
Click to expand...
Click to collapse
everything is done ! i changed MID and CID to PN0710000 & HTC__001 respectivly .. now all i have to do is download the ruu i posted and run it right ?
alray said:
the ruu you have linked have PN0710000 and yours is PN0711000, so you'll need to change your mid to use that one. Follow the guide to change mid, its pretty easy to do. Yes you can choose whater cid of those but i'll recommend you to use HTC__001 (don't forget its 2 underscore __ 8 characters total). The bootloader will not relocks by itself
Click to expand...
Click to collapse
Okaii, so i have the ruu file, i ran it, htc went to silver htc screen , then it gave a 155 error.. What ?
( Note : phone is still okaii , nothing wrong happened )
ali-k95 said:
Okaii, so i have the ruu file, i ran it, htc went to silver htc screen , then it gave a 155 error.. What ?
( Note : phone is still okaii , nothing wrong happened )
Click to expand...
Click to collapse
Lock your bootloader, HTC ruu requires it, even if you are s-off
What I don't get is after you have updated your Rom, firmware, and hboot, you are then going to flash a custom Rom ??????
You are making things very difficult and complicated for yourself, just manually update your firmware.
Seanie280672 said:
Lock your bootloader, HTC ruu requires it, even if you are s-off
What I don't get is after you have updated your Rom, firmware, and hboot, you are then going to flash a custom Rom ??????
You are making things very difficult and complicated for yourself, just manually update your firmware.
Click to expand...
Click to collapse
the problem is that i read some people had bricks upgrading manually through firmware.zip files , so let the ruu make it for me , the ota , then i'll just unlock it again , flash custom recovery and custom rom .. ik it's complicated but i have no htc service here if i bricked my phone so yeah :/
Seanie280672 said:
Lock your bootloader, HTC ruu requires it, even if you are s-off
What I don't get is after you have updated your Rom, firmware, and hboot, you are then going to flash a custom Rom ??????
You are making things very difficult and complicated for yourself, just manually update your firmware.
Click to expand...
Click to collapse
EDIT : i relocked it and it's still not working . error 155 , i guess imma try now firmware.zip method ?
( i unlocked bootloader again , changed cid back to 11111111 .. what to do now with MID ? and can i go for this firmware fw_6.06.401.1_custom.zip
or should i use this fw_5.11.401.10_custom.zip ?
thanks.
EDIT : i opened firmware.zip and checked for the mid's, mine was there , so i did it and it went okaii
i'm updated now , thanks all for the help
just one more q. , can i updat fw_6.06.401.1_custom.zip ( i'm on fw_5.11.401.10_custom.zip ) if my ROM is still on fw_5.11.401.10_custom.zip ? thanks.
ali-k95 said:
EDIT : i relocked it and it's still not working . error 155 , i guess imma try now firmware.zip method ?
( i unlocked bootloader again , changed cid back to 11111111 .. what to do now with MID ? and can i go for this firmware fw_6.06.401.1_custom.zip
or should i use this fw_5.11.401.10_custom.zip ?
thanks.
EDIT : i opened firmware.zip and checked for the mid's, mine was there , so i did it and it went okaii
i'm updated now , thanks all for the help
just one more q. , can i updat fw_6.06.401.1_custom.zip ( i'm on fw_5.11.401.10_custom.zip ) if my ROM is still on fw_5.11.401.10_custom.zip ? thanks.
Click to expand...
Click to collapse
as your s-off you can upgrade and downgrade as you please, ive heard the radio file contained in the new firmware is the best to date.
Here's a handy one to add to your bookmarks: http://forum.xda-developers.com/showthread.php?t=2316726
NEVER S-ON, with the custom firmware's, if you s-on, you will have an instant brick due to the modded HBOOT.
Related
Hi Guys
i acquired a few days ago a new cell
ONE HTC m7 32GB
with these characteristics
m7_ul pvt ship s0ff rh
MID : PN07120
CID-BS_US001
Hboot 1.44.0000
open dsp v 26.120.274.0202
emm boot
but.... i upgrade to the European version (to update to 4.2.2)
PN0710000
changing the
CID to PN0710000 and MID to HTC__304
before I realized the problem of the camera (blurring and noise at night)
and thought it was normal.
now I want to go back and can not find the official firmware anywhere
now im in 4.2.2
Pleas Help me!
CID should be HTC__001 and MID PN0710000
Then get the 1.28.401.7 RUU and flash that and then get the OTAs to get to 2.24.401.8 and you're good to go
EddyOS said:
CID should be HTC__001 and MID PN0710000
Then get the 1.28.401.7 RUU and flash that and then get the OTAs to get to 2.24.401.8 and you're good to go
Click to expand...
Click to collapse
but my Original data are exept SOFF
m7_ul pvt ship s0ff rh
MID : PN07120
CID-BS_US001
Hboot 1.44.0000
open dsp v 26.120.274.0202
emm boot
isma907 said:
but my Original data are exept SOFF
m7_ul pvt ship s0ff rh
MID : PN07120
CID-BS_US001
Hboot 1.44.0000
open dsp v 26.120.274.0202
emm boot
Click to expand...
Click to collapse
flash original RUU and you are ok. keep s-off , is a good thing
in fastboot : fastboot oem writecid BS_US001
fastboot oem writemid PN07120
criszz said:
flash original RUU and you are ok. keep s-off , is a good thing
in fastboot : fastboot oem writecid BS_US001
fastboot oem writemid PN07120
Click to expand...
Click to collapse
the problem is that:
I cant find my firmware version / and i am NOOBie to HTC come from Samsung
for that reason i need more details XD (would be very grateful)
who is my official RUU? in this case?
isma907 said:
the problem is that:
I cant find my firmware version / and i am NOOBie to HTC come from Samsung
for that reason i need more details XD (would be very grateful)
who is my official RUU? in this case?
Click to expand...
Click to collapse
you can do fastboot comand and set your cid/mid at ant time without stock ruu, but look here, you will find right ruu >> http://forum.xda-developers.com/showthread.php?p=39588860
criszz said:
you can do fastboot comand and set your cid/mid at ant time without stock ruu, but look here, you will find right ruu >> http://forum.xda-developers.com/showthread.php?p=39588860
Click to expand...
Click to collapse
my model is not on the list you say
isma907 said:
my model is not on the list you say
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=40672030&postcount=6
criszz said:
http://forum.xda-developers.com/showpost.php?p=40672030&postcount=6
Click to expand...
Click to collapse
sorry for my ignorance
but i dont know who is my model i read the list but is not here
could you give me, what would be my model in this case? sorry for disturb
my htc is not 64gb ... is a 32Gb.. this worK?
BS_US001 is the Dev Edition; if that was original CID before you did anything, then the Dev Edition RUU is what you want!
wmg316 said:
BS_US001 is the Dev Edition; if that was original CID before you did anything, then the Dev Edition RUU is what you want!
Click to expand...
Click to collapse
SO... first i need to flash the RUU
and later write CID AND MID?
isma907 said:
SO... first i need to flash the RUU
and later write CID AND MID?
Click to expand...
Click to collapse
The RUU checks cid and mid for compatibility. The only reason you are changing them is to flash the RUU.
AT&T HTC M7ul
Baad Newz's InsertCoin 3.4-2
Flar2's Bulletproof 6.2
All right, here comes a noob question:
My HTC One is from Israel, and though I made a nandroid backup of my phone after I rooted it, I don't have one from before my rooting it. That said, my CID was HTC__K18...there is no RUU for that CID, so I used rumrunner to s-off my phone, changed my CID to HTC__01 and used the European RUU (the U not the UL because my phone is a U) to get %100 back to stock. The RUU that I flashed has a hboot of 1.44 and my stock was already a 1.54 and 4.2.2 (maybe 4.1.2?)...anyway after flashing the RUU, I'm not able to OTA and I really just want to get %100 stock...in a way that I'd be capable of receiving all the updates OTA and have the highest firmware/software. Thanks in advance!
Oh, and here's some of my info:
version-bootloader: 1.44.0000 (it shipped with 1.54 but I RUUed an older version)
version-baseband: 4A.14.3250.13
version-main: 1.29.401.2 (it shipped with 2.24.401.2)
version-misc: PVT SHIP S-OFF (used rumrunner to s-off hboot of 1.54)
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__001 (I changed the cid from HTC__k18)
shpongleeyes said:
All right, here comes a noob question:
My HTC One is from Israel, and though I made a nandroid backup of my phone after I rooted it, I don't have one from before my rooting it. That said, my CID was HTC__K18...there is no RUU for that CID, so I used rumrunner to s-off my phone, changed my CID to HTC__01 and used the European RUU (the U not the UL because my phone is a U) to get %100 back to stock. The RUU that I flashed has a hboot of 1.44 and my stock was already a 1.54 and 4.2.2 (maybe 4.1.2?)...anyway after flashing the RUU, I'm not able to OTA and I really just want to get %100 stock...in a way that I'd be capable of receiving all the updates OTA and have the highest firmware/software. Thanks in advance!
Oh, and here's some of my info:
version-bootloader: 1.44.0000 (it shipped with 1.54 but I RUUed an older version)
version-baseband: 4A.14.3250.13
version-main: 1.29.401.2 (it shipped with 2.24.401.2)
version-misc: PVT SHIP S-OFF (used rumrunner to s-off hboot of 1.54)
product: m7_u
platform: HBOOT-8064
modelid: PN0711000
cidnum: HTC__001 (I changed the cid from HTC__k18)
Click to expand...
Click to collapse
Question: where do you want to go?
1- To an European stock model
2- To your version (I have a nandroid of 2.24.401.2 for a PN0711000, M7_U)
nkk71 said:
Question: where do you want to go?
1- To an European stock model
2- To your version (I have a nandroid of 2.24.401.2 for a PN0711000, M7_U)
Click to expand...
Click to collapse
Whatever would give me OTA updates and allow me to be as stock as possible! Just out of curiosity, what would the benefits of each be? Thank you!
shpongleeyes said:
Whatever would give me OTA updates and allow me to be as stock as possible! Just out of curiosity, what would the benefits of each be? Thank you!
Click to expand...
Click to collapse
LOL, this just resulted in another question: why not use a custom ROM, they get updated way more frequently than OTAs? If you want "stock as possible" you can check out ARHD, it's very stock. (and since you're S-Off you can upgrade/downgrade anytime, including firmware!!)
As for benefits of the other two options:
1) I think HTC__001 (or was it Y13, not sure), are usually among the first WWE editions to get OTAs (not as fast as custom ROMs )
2) HTC_K18 would put you back to a state where you bought the phone.
It's all personal choice, eg I like stock but want it rooted so I'm currently running ARHD 13.3 (until I decide to upgrade), others like their Venom Tweaks or InsertCoin etc... and again for others they need to be unrooted because of some banking apps.
So give it a thought and let me know, which road you wanna take
PS: Hit the thanks button if I helped
nkk71 said:
LOL, this just resulted in another question: why not use a custom ROM, they get updated way more frequently than OTAs? If you want "stock as possible" you can check out ARHD, it's very stock. (and since you're S-Off you can upgrade/downgrade anytime, including firmware!!)
As for benefits of the other two options:
1) I think HTC__001 (or was it Y13, not sure), are usually among the first WWE editions to get OTAs (not as fast as custom ROMs )
2) HTC_K18 would put you back to a state where you bought the phone.
It's all personal choice, eg I like stock but want it rooted so I'm currently running ARHD 13.3 (until I decide to upgrade), others like their Venom Tweaks or InsertCoin etc... and again for others they need to be unrooted because of some banking apps.
So give it a thought and let me know, which road you wanna take
PS: Hit the thanks button if I helped
Click to expand...
Click to collapse
Thank you for the quick reply!
Okay, so I'd like to go with the European road...as far as custom ROMs are concerned, I had ARHD, both GE and Sense, but I just want things to run smoothly and not worry about OTAs....I'd like to receive them as soon as they're available with the least amount of headache...
On that note, can I receive OTA updates directly from HTC while I'm s-off? Because currently I don't have that option...it doesn't even show that I have an update available.
Also, is your nandroid of 2.24.401.2 made with cid HTC__k18?
P.s. I don't even need/want to root the phone again...it's just too much for me. I'd like to get as stock as possible while keeping the options open (that's why I want to leave s-off).
Thank you again for your help! You're awesome!
shpongleeyes said:
Thank you for the quick reply!
Okay, so I'd like to go with the European road...as far as custom ROMs are concerned, I had ARHD, both GE and Sense, but I just want things to run smoothly and not worry about OTAs....I'd like to receive them as soon as they're available with the least amount of headache...
On that note, can I receive OTA updates directly from HTC while I'm s-off? Because currently I don't have that option...it doesn't even show that I have an update available.
P.s. I don't even need/want to root the phone again...it's just too much for me. I'd like to get as stock as possible while keeping the options open (that's why I want to leave s-off).
Thank you again for your help! You're awesome!
Click to expand...
Click to collapse
Ok, European road
1- You've already changed your CID, you still need to change your MID: "fastboot oem writemid PN0710000"
(keep a record of your original CID, MID, and software/firmware version somewhere in case you ever need it)
2- remove tampered either using revone or http://forum.xda-developers.com/showthread.php?t=2477792
3- set your phone to LOCKED (not relocked) using revone or http://forum.xda-developers.com/showthread.php?t=2475914
4- then use the full European RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
you should keep S-Off and not go back S-On.
After installing the RUU you should immediately start receiving OTAs all the way up to 3.62
PS: remember the above procedure will wipe everything off your phone, so back up anything you may need first!!
nkk71 said:
Ok, European road
1- You've already changed your CID, you still need to change your MID: "fastboot oem writemid PN0710000"
(keep a record of your original CID, MID, and software/firmware version somewhere in case you ever need it)
2- remove tampered either using revone or http://forum.xda-developers.com/showthread.php?t=2477792
3- set your phone to LOCKED (not relocked) using revone or http://forum.xda-developers.com/showthread.php?t=2475914
4- then use the full European RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
you should keep S-Off and not go back S-On.
After installing the RUU you should immediately start receiving OTAs all the way up to 3.62
PS: remember the above procedure will wipe everything off your phone, so back up anything you may need first!!
Click to expand...
Click to collapse
You're awesome. However, I did all those steps except for the first step...when I go into recovery mode now, there's still the red lettering as well as when I go into "Tell HTC and error reporting" the red lettering says "This is a test device. Accordingly, to collect critical information about the device, Tell HTC is enabled and cannot be turned off regardless of device settings." Oh, and I'm not able to receive the OTAs.
Now, if I change the MID, do I need to do all the steps again or can I just do the first step now? Will that help get rid of the "test device" warnings that I have on the phone?
Oh, and I used this European one before (cause I have a U and not UL) http://www.htc1guru.com/dld/ruu_m7_..._10-33-1150-01_release_311663_signed_2_4-exe/
Why would I use the UL one?
Thank you again for you time and help!
shpongleeyes said:
You're awesome. However, I did all those steps except for the first step...when I go into recovery mode now, there's still the red lettering as well as when I go into "Tell HTC and error reporting" the red lettering says "This is a test device. Accordingly, to collect critical information about the device, Tell HTC is enabled and cannot be turned off regardless of device settings." Oh, and I'm not able to receive the OTAs.
Now, if I change the MID, do I need to do all the steps again or can I just do the first step now? Will that help get rid of the "test device" warnings that I have on the phone?
Thank you again for you time and help!
Click to expand...
Click to collapse
You won't get any OTAs because of your MID, change it, and see if you start getting the OTAs. M7_U and M7_UL share pretty much most of the software stuff, the hardware is different of course, but MID 0711 and CID HTC__001 won't get any OTAs.
The "Tell HTC and error reporting" red text is because you're S-Off, personally I wouldn't care. But if it bothers you A LOT, you'll need to go S-On again, and AT THIS TIME you should NOT!!! we can deal with that later.
Change MID, and confirm you are now getting OTAs
Again DO NOT GO S-ON, at least for the time being!!
---------- Post added at 07:51 PM ---------- Previous post was at 07:48 PM ----------
shpongleeyes said:
Oh, and I used this European one before (cause I have a U and not UL) http://www.htc1guru.com/dld/ruu_m7_..._10-33-1150-01_release_311663_signed_2_4-exe/
Click to expand...
Click to collapse
Oh I didnt see that one, but it should give you updates till 2.24.401.9 at least. Don't know if 3.62 out yet for that PN.
nkk71 said:
You won't get any OTAs because of your MID, change it, and see if you start getting the OTAs. M7_U and M7_UL share pretty much most of the software stuff, the hardware is different of course, but MID 0711 and CID HTC__001 won't get any OTAs.
The "Tell HTC and error reporting" red text is because you're S-Off, personally I wouldn't care. But if it bothers you A LOT, you'll need to go S-On again, and AT THIS TIME you should NOT!!! we can deal with that later.
Change MID, and confirm you are now getting OTAs
Again DO NOT GO S-ON, at least for the time being!!
---------- Post added at 07:51 PM ---------- Previous post was at 07:48 PM ----------
Oh I didnt see that one, but it should give you updates till 2.24.401.9 at least. Don't know if 3.62 out yet for that PN.
Click to expand...
Click to collapse
Okay, I tried to change the mid but the console is giving me an error:
...
<bootloader> [ERR] Command error !!!
OKAY [ 0.016s]
finished. total time: 0.031s
shpongleeyes said:
Okay, I tried to change the mid but the console is giving me an error:
...
<bootloader> [ERR] Command error !!!
OKAY [ 0.016s]
finished. total time: 0.031s
Click to expand...
Click to collapse
Let's slow it down a little, if I understand correctly:
1- you are now unTAMPERED
2- you are now LOCKED, not RElocked or UNlocked
3- you have CID: HTC__001
4- you have MID: PN0711000
5- you ran the RUU: http://www.htc1guru.com/dld/ruu_m7_..._10-33-1150-01_release_311663_signed_2_4-exe/
6- you are still S-Off (please!)
If all of the above are true, when you go to Settings->About->Software Update (or whatever it's called), does it show an update? or what does it say
EDIT: can you repost a "fastboot getvar all" (remove IMEI and s/n)
nkk71 said:
Let's slow it down a little, if I understand correctly:
1- you are now unTAMPERED
2- you are now LOCKED, not RElocked or UNlocked
3- you have CID: HTC__001
4- you have MID: PN0711000
5- you ran the RUU: http://www.htc1guru.com/dld/ruu_m7_..._10-33-1150-01_release_311663_signed_2_4-exe/
6- you are still S-Off (please!)
If all of the above are true, when you go to Settings->About->Software Update (or whatever it's called), does it show an update? or what does it say
EDIT: can you repost a "fastboot getvar all" (remove IMEI and s/n)
Click to expand...
Click to collapse
you're correct about everything:
All it says is that my software is up-to-date...
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.44.0000
(bootloader) version-baseband: 4A.14.3250.13
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 1.29.401.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: HTC__001
(bootloader) battery-status: good
(bootloader) battery-voltage: 4327mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
shpongleeyes said:
you're correct about everything:
All it says is that my software is up-to-date...
(bootloader) cidnum: HTC__001
Click to expand...
Click to collapse
Before we go on messing with MID, can you just change CID to HTC__J15 (two underscores) and check for a software update, don't know the original 1.xx version, but I am sure that J15 PN0711 got the 2.24.401.2 and (possibly) 2.24.401.9.
Just check if it gives an update with HTC__J15, no need to download it!!
nkk71 said:
Before we go on messing with MID, can you just change CID to HTC__J15 (two underscores) and check for a software update, don't know the original 1.xx version, but I am sure that J15 PN0711 got the 2.24.401.2 and (possibly) 2.24.401.9.
Just check if it gives an update with HTC__J15, no need to download it!!
Click to expand...
Click to collapse
Yes
That gives me an option to upgrade...
now what?
shpongleeyes said:
Yes
That gives me an option to upgrade...
now what?
Click to expand...
Click to collapse
Oh man, sorry to keep you hanging, but we may need to pick this up tomorrow, going for dinner now, wont be back till tomorrow,
but try setting CID to your original one, and see if you get any updates for your original CID.
sorry, got to go, I'll check back on you tomorrow
whatever you decide to do, do NOT GO S-ON (at least for now)
Have a good evening...
nkk71 said:
Oh man, sorry to keep you hanging, but we may need to pick this up tomorrow, going for dinner now, wont be back till tomorrow,
but try setting CID to your original one, and see if you get any updates for your original CID.
sorry, got to go, I'll check back on you tomorrow
whatever you decide to do, do NOT GO S-ON (at least for now)
Have a good evening...
Click to expand...
Click to collapse
When I set it back to my original CID there are no updates...enjoy the food
I look forward to tomorrow!
shpongleeyes said:
When I set it back to my original CID there are no updates...enjoy the food
I look forward to tomorrow!
Click to expand...
Click to collapse
Hey, how are you today?
I'll be online later (around 5 or 6), but it looks like that RUU is fully compatible with ur original CID. So go ahead with your original CID, and get the OTAs. U should be able to get at least to 2.24.401.9, don't know if 3.62 is out for u yet.
Keep s-off in case we need to change something later.
C u later...
Sent from my HTC One using Tapatalk
nkk71 said:
Hey, how are you today?
I'll be online later (around 5 or 6), but it looks like that RUU is fully compatible with ur original CID. So go ahead with your original CID, and get the OTAs. U should be able to get at least to 2.24.401.9, don't know if 3.62 is out for u yet.
Keep s-off in case we need to change something later.
C u later...
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Hey, no the RUU is not compatible with my original CID (HTC__K18) as there are no available upgrades after I change the CID...also the same is true when I change it to HTC__001, though it did work when you told me to update to J something or other...weird.
shpongleeyes said:
Hey, no the RUU is not compatible with my original CID (HTC__K18) as there are no available upgrades after I change the CID...also the same is true when I change it to HTC__001, though it did work when you told me to update to J something or other...weird.
Click to expand...
Click to collapse
Well I guess you have 2 choices:
1- set CID to HTC__J15 -> a friend of mine has PN0711000 HTC__J15, it's basically the M7_U version and HTC__J15 is a nonbranded WWE edition but usually for the Middle East
2- set CID to HTC__001, set MID to PN0710000, and use this RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
by changing to MID PN0710000, it will make the software on your phone think it's a UL model, but since the hardware isn't there for LTE, it won't make any difference.
Step 1, is probably the easiest to do, so why not just set it to J15 and see how far the updates go. (ie if 3.62 is out for J15).
Hope that helps
nkk71 said:
Well I guess you have 2 choices:
1- set CID to HTC__J15 -> a friend of mine has PN0711000 HTC__J15, it's basically the M7_U version and HTC__J15 is a nonbranded WWE edition but usually for the Middle East
2- set CID to HTC__001, set MID to PN0710000, and use this RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
by changing to MID PN0710000, it will make the software on your phone think it's a UL model, but since the hardware isn't there for LTE, it won't make any difference.
Step 1, is probably the easiest to do, so why not just set it to J15 and see how far the updates go. (ie if 3.62 is out for J15).
Hope that helps
Click to expand...
Click to collapse
Thank you for you patience and your help! You've been amazing!
shpongleeyes said:
Thank you for you patience and your help! You've been amazing!
Click to expand...
Click to collapse
No problem, glad to be of help. If everything's OK now, could I please ask you to change the main thread title to include [SOLVED]. Thanks & take care
hello there
I have unlocked ATT htc one (PN0712000) and i wanted to change my MID to international (PN0710000). I have super CID/S-OFF and im running custom ROM. i read alot but i didnt get what exactly to do. any suggestions.. thanks
biopl said:
hello there
I have unlocked ATT htc one (PN0712000) and i wanted to change my MID to international (PN0710000). I have super CID/S-OFF and im running custom ROM. i read alot but i didnt get what exactly to do. any suggestions.. thanks
Click to expand...
Click to collapse
[TUTORIAL] How to change the MODEL ID of the HTC One including video link
biopl said:
hello there
I have unlocked ATT htc one (PN0712000) and i wanted to change my MID to international (PN0710000). I have super CID/S-OFF and im running custom ROM. i read alot but i didnt get what exactly to do. any suggestions.. thanks
Click to expand...
Click to collapse
Use this tool if you don't wanna mess with hboot: http://forum.xda-developers.com/showthread.php?t=2535365
Sent from my HTC One using Tapatalk
nkk71 said:
Use this tool if you don't wanna mess with hboot: http://forum.xda-developers.com/showthread.php?t=2535365
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
What's the difference between this and the other one above ?
Sent from my HTC One using XDA Premium 4 mobile app
biopl said:
What's the difference between this and the other one above ?
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The end result is the same, but in the TUTORIAL it's a lengthy process, and you'll have to flash an ENG hboot, which can be risky if you don't follow the steps exactly to the letter.
The tool is a flashable file (from within custom recovery), just like any custom ROM, and it has the Aroma Installer which lets you select which MID you want. Using the tool you should be done in less than a minute, whereas following the tutorial is going to take a lot longer.
My recommendation is using the tool: nice, simple, and easy, and no data loss.
Aroma sometimes gets stuck (not only with this tool, but in general), not a big deal!!, but I've had no problems, when i first wipe cache and dalvik in custom recovery, before running the tool. (or other tools)
nkk71 said:
The end result is the same, but in the TUTORIAL it's a lengthy process, and you'll have to flash an ENG hboot, which can be risky if you don't follow the steps exactly to the letter.
The tool is a flashable file (from within custom recovery), just like any custom ROM, and it has the Aroma Installer which lets you select which MID you want. Using the tool you should be done in less than a minute, whereas following the tutorial is going to take a lot longer.
My recommendation is using the tool: nice, simple, and easy, and no data loss.
Aroma sometimes gets stuck (not only with this tool, but in general), not a big deal!!, but I've had no problems, when i first wipe cache and dalvik in custom recovery, before running the tool. (or other tools)
Click to expand...
Click to collapse
thanks for clearing my doubts, i used to tool and everything went perfect.. i was wonderingn now that i have supercid, can i flash any RUU.exe ?
biopl said:
thanks for clearing my doubts, i used to tool and everything went perfect.. i was wonderingn now that i have supercid, can i flash any RUU.exe ?
Click to expand...
Click to collapse
yep, should be good to go.
and remember to stay s-off!!!
nkk71 said:
yep, should be good to go.
and remember to stay s-off!!!
Click to expand...
Click to collapse
sorry for silly question,, will this remove s-off and how to stay s-off ?
biopl said:
sorry for silly question,, will this remove s-off and how to stay s-off ?
Click to expand...
Click to collapse
No it won't remove s-off. The only way that can be done is if YOU DO IT MANUALLY, with fastboot oem writesecureflag 3.
Sent from my HTC One using Tapatalk
nkk71 said:
No it won't remove s-off. The only way that can be done is if YOU DO IT MANUALLY, with fastboot oem writesecureflag 3.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
im planning to flash RUU.exe and what should i do to stay safe and can u recommend me any RUU.
biopl said:
im planning to flash RUU.exe and what should i do to stay safe and can u recommend me any RUU.
Click to expand...
Click to collapse
so if I understand correctly, you just want a stock international HTC? (wonder why people don't like custom roms )
anyway, to get just international WWE edition, you have already have changed your MID to PN0710000, so now:
1- change CID: fastboot oem writecid HTC__001 (two underscores)
2- use the following RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
since you're s-off, you can stay UNLOCKED for RUU, and definitely stay S-Off
after running the RUU you should start getting updates immediately all the way up to 3.62 (Android 4.3); 4.4 isnt out yet for WWE.
EDIT: just noticed you're in Dubai, so maybe better to change CID to HTC__J15 (WWE GCC), so fastboot oem writecid HTC__J15
EDIT2: running the RUU will wipe EVERYTHING off your phone including pictures, music etc.
Hit the thanks button if i helped
Thanks for the reply, if I change my CID to HTC__J15, will I still be able to flash the above RUU, and will I have touch problem since I'm running latest firmwarm/Hboot, again thanks for your help made things easier
Sent from my HTC One using XDA Premium 4 mobile app
nkk71 said:
so if I understand correctly, you just want a stock international HTC? (wonder why people don't like custom roms )
anyway, to get just international WWE edition, you have already have changed your MID to PN0710000, so now:
1- change CID: fastboot oem writecid HTC__001 (two underscores)
2- use the following RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
since you're s-off, you can stay UNLOCKED for RUU, and definitely stay S-Off
after running the RUU you should start getting updates immediately all the way up to 3.62 (Android 4.3); 4.4 isnt out yet for WWE.
EDIT: just noticed you're in Dubai, so maybe better to change CID to HTC__J15 (WWE GCC), so fastboot oem writecid HTC__J15
EDIT2: running the RUU will wipe EVERYTHING off your phone including pictures, music etc.
Hit the thanks button if i helped
Click to expand...
Click to collapse
Thanks for the reply, if I change my CID to HTC__J15, will I still be able to flash the above RUU, and will I have touch problem since I'm running latest firmwarm/Hboot, again thanks for your help made things easier
biopl said:
Thanks for the reply, if I change my CID to HTC__J15, will I still be able to flash the above RUU, and will I have touch problem since I'm running latest firmwarm/Hboot, again thanks for your help made things easier
Click to expand...
Click to collapse
1- touchscreen: no problem, because a full ruu will downgrade everything
2- the RUU is made for
Code:
modelid: [B]PN0710000[/B]
cid: HTC__001, HTC__E11, HTC__102, HTC__203, HTC__405, HTC__Y13, HTC__304, HTC__032, HTC__A07, HTC__J15, HTC__016
there are minor differences in the CIDs, for example, setting HTC__001 doesn't give you Eastern European country/languages, but HTC__032 does:
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Nor
nkk71 said:
1- touchscreen: no problem, because a full ruu will downgrade everything
2- the RUU is made for
Code:
modelid: [B]PN0710000[/B]
cid: HTC__001, HTC__E11, HTC__102, HTC__203, HTC__405, HTC__Y13, HTC__304, HTC__032, HTC__A07, HTC__J15, HTC__016
there are minor differences in the CIDs, for example, setting HTC__001 doesn't give you Eastern European country/languages, but HTC__032 does:
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Nor
Click to expand...
Click to collapse
so lets say after i flash RUU and update to 4.3, will i need to root again if i wanted to install custom roms/firmwares ?
nkk71 said:
so if I understand correctly, you just want a stock international HTC? (wonder why people don't like custom roms )
anyway, to get just international WWE edition, you have already have changed your MID to PN0710000, so now:
1- change CID: fastboot oem writecid HTC__001 (two underscores)
2- use the following RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
since you're s-off, you can stay UNLOCKED for RUU, and definitely stay S-Off
after running the RUU you should start getting updates immediately all the way up to 3.62 (Android 4.3); 4.4 isnt out yet for WWE.
EDIT: just noticed you're in Dubai, so maybe better to change CID to HTC__J15 (WWE GCC), so fastboot oem writecid HTC__J15
EDIT2: running the RUU will wipe EVERYTHING off your phone including pictures, music etc.
Hit the thanks button if i helped
Click to expand...
Click to collapse
I tried and got ERROR [150]
Sent from my HTC One using XDA Premium 4 mobile app
ERROR 155*
Sent from my HTC One using XDA Premium 4 mobile app
biopl said:
ERROR 155*
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hboot 1.55? you have to downgrade to 1.44 separately first:
so download this: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
in bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <---- just in case the above said “failed flush again”
fastboot reboot-bootloader
--> and confirm hboot is now 1.44
then run ruu.exe
nkk71 said:
hboot 1.55? you have to downgrade to 1.44 separately first:
so download this: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
in bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <---- just in case the above said “failed flush again”
fastboot reboot-bootloader
--> and confirm hboot is now 1.44
then run ruu.exe
Click to expand...
Click to collapse
I think for Error 155, i need to re-lock my bootloader then flash RUU
biopl said:
I think for Error 155, i need to re-lock my bootloader then flash RUU
Click to expand...
Click to collapse
not if you are s-off
Hello members of XDA,
I ran into a problem trying to restoring my Htc One back to sense version, it sais on the conversion thread that I should have a backup of my original Hboot, which I do not have. I don't know if that's a problem, i downloaded the 1.44 hboot as I guess that's the one I should use to get back to stock. As of now I have S off, and am on hboot 1.54 and on official GPE.
Now comes the part where I'm stuck, I do not know what kind of RUU I need to return to stock, I know I need the hboot 1.44 one but I don't want any problems with bloatware or flashing a wrong baseband etc. Can anyone point me in the right direction of the right RUU? To be sure I'm pasting a getvar all
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main: 3.62.1700.1
version-misc: PVT SHIP S-OFF
serialno: xxxx
imei: xxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4014mV
partition-layout: Generic
security: off
Stefan0vic said:
Hello members of XDA,
I ran into a problem trying to restoring my Htc One back to sense version, it sais on the conversion thread that I should have a backup of my original Hboot, which I do not have. I don't know if that's a problem, i downloaded the 1.44 hboot as I guess that's the one I should use to get back to stock. As of now I have S off, and am on hboot 1.54 and on official GPE.
Now comes the part where I'm stuck, I do not know what kind of RUU I need to return to stock, I know I need the hboot 1.44 one but I don't want any problems with bloatware or flashing a wrong baseband etc. Can anyone point me in the right direction of the right RUU? To be sure I'm pasting a getvar all
version: 0.5
version-bootloader: 1.54.0000
version-baseband: 4T.21.3218.21
version-cpld: None
version-microp: None
version-main: 3.62.1700.1
version-misc: PVT SHIP S-OFF
serialno: xxxx
imei: xxxx
meid: 00000000000000
product: m7_ul
platform: HBOOT-8064
modelid: PN0710000
cidnum: 11111111
battery-status: good
battery-voltage: 4014mV
partition-layout: Generic
security: off
Click to expand...
Click to collapse
well all your getvar really shows is yes you converted to GPE
what was the phone before you converted it ? CID - MID and version-main
clsA said:
well all your getvar really shows is yes you converted to GPE
what was the phone before you converted it ? CID - MID and version-main
Click to expand...
Click to collapse
Thank god I saved that all in a word document,
Well my Cid was HTC__E11 it is now supercid, the version main was 4.19.401.11
my model ID was and still is PN0710000
Stefan0vic said:
Thank god I saved that all in a word document,
Well my Cid was HTC__E11 it is now supercid, the version main was 4.19.401.11
my model ID was and still is PN0710000
Click to expand...
Click to collapse
Then download this
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
change you CID back with fastboot
fastboot oem writecid HTC__E11
here's the 1.44 hboot >> https://www.dropbox.com/s/xyqurk33yh409bi/orig_hboot_1.44.0000_M7_RUUmode.zip
flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip <name of hboot>.zip
fastboot reboot
then run the RUU .exe you should be back to almost stock
clsA said:
Then download this
http://androidruu.com/getdownload.p...10.38r.1157.04L_release_353069_signed_2-1.exe
change you CID back with fastboot
fastboot oem writecid HTC__E11
here's the 1.44 hboot >> https://www.dropbox.com/s/xyqurk33yh409bi/orig_hboot_1.44.0000_M7_RUUmode.zip
flash it with fastboot
fastboot oem rebootRUU
fastboot flash zip <name of hboot>.zip
fastboot reboot
then run the RUU .exe you should be back to almost stock
Click to expand...
Click to collapse
Thank you so much,
Why do so many threads advice to run 1.44 RUU though? After this I will have 1.44 hboot with android 4.4.2?
Edit: Download is taking aprox 2-3 hrs. Is there any way I can download it a little bit faster?
Stefan0vic said:
Thank you so much,
Why do so many threads advice to run 1.44 RUU though? After this I will have 1.44 hboot with android 4.4.2?
Edit: Download is taking aprox 2-3 hrs. Is there any way I can download it a little bit faster?
Click to expand...
Click to collapse
try here
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
and no you have hboot 1.56 after the RUU step
the hboot 1.44 insures the RUU will work smoothly
it's also a vital step if you want to remove tampered and show locked instead of relocked
to return for repair
clsA said:
try here
http://www.htc1guru.com/dld/ruu_m7_...0-38r-1157-04l_release_353069_signed_2-1-exe/
Click to expand...
Click to collapse
Saw you edited your post, thank you so much
Stefan0vic said:
I'll just keep my pc on for a bit Thank you so much for your help.
Just 1 more question, will my bootloader be updated with the RUU itself? I need the phone as much stock possible since I need to give it for warranty for camera replacement.
Click to expand...
Click to collapse
now we are getting somewhere
before running the RUU you have more work then
you have to remove the tampered flag and lock before running the RUU
use this tool to do both >> http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/
from @nkk71 SuperGuide
Method 2: Guru Bootloader Reset, more automated, but may freeze
adb push Guru_Bootloader_Reset_1.0.zip /data/media/
in recovery, "install zip" -> "choose zip" -> and select "Guru_Bootloader_Reset_1.0"
go through the installer and select "Remove TAMPERED" and "LOCK Bootloader"; once finished: continue with below reboot command
adb reboot bootloader
and confirm no TAMPERED and LOCKED status
Click to expand...
Click to collapse
clsA said:
now we are getting somewhere
before running the RUU you have more work then
you have to remove the tampered flag and lock before running the RUU
use this tool to do both >> http://www.htc1guru.com/dld/guru_bootloader_reset_1-0-zip/
from @nkk71 SuperGuide
Click to expand...
Click to collapse
I dont have the tampered flag so i guess i dont have to do that,
I will use that to get my bootloader locked though, thank you. RUU is still downloading as we speak but I can almost run it
So its:
1. Flash hboot
2. lock bootloader
3. run RUU?
Help!! It returns me with an image fault!!
Error: 158 !
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Stefan0vic said:
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Click to expand...
Click to collapse
don't panic .. just use a different ruu
clsA said:
don't panic .. just use a different ruu
Click to expand...
Click to collapse
I'm trying, I just don't know which one since I can't find an RUU that matches my radio
Stefan0vic said:
Can someone help me.. It's responding with an error 158 despite S off and changing CID back to original..
Is it the RUU?
Click to expand...
Click to collapse
ERROR [110]: FILE OPEN ERROR
This error message indicates that the RUU lacks some specific files or they are damaged, so the RUU cannot continue with the update. You have to get the complete RUU package and try again.
ERROR [120]: MAIN BATTERY POWER
This error message will appear when the Android phone’s battery power is not sufficient (Batter power should be more than 30%). Although RUU will instruct you to plug in the AC adapter, it will still need to make sure that your Android phone has enough power to complete the update. (The Android phone cannot charge the battery when it is connected to the PC while installing the RUU).
ERROR [130]: MODEL ID ERROR
ERROR [131]: CUSTOMER ID ERROR
One of these error messages will appear when you use the wrong RUU to do the update. The RUU will check if the Model ID and Language ID are compatible with the Android phone. Make sure you use the correct RUU to update.
ERROR [155~159]: IMAGE ERROR
One of these error messages will appear when you use the incorrect RUU to update and the image file size is larger than the Flash ROM size. In this case, download the correct RUU version and try again.
ERROR [170]: USB CONNECTION ERROR
This error message will appear when the Android phone is not correctly connected to the host PC. It might be a USB connection problem or a PC USB driver problem. Make sure the Android phone is connected to the host PC correctly and/or check if the PC driver matches the Android phone.
Sent from my HTC One using XDA Premium 4 mobile app
I know what the error means, but I don't know what RUU I need, i thought it accepted everything since I was s off
Stefan0vic said:
I'm trying, I just don't know which one since I can't find an RUU that matches my radio
Click to expand...
Click to collapse
did you change your CID ?
if so put it back to supercid and try
also did you md5 check your download
did you flash the 1.44 hboot ?
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
File Size: 1.5 GiB - Downloads: 69507
MD5: 9ad4111ce86981e3dffcce6d9ee80551
Comments: modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
Click to expand...
Click to collapse
after 69,000 plus downloads you think someone would report if it's a bad file
clsA said:
did you change your CID ?
if so put it back to supercid and try
also did you md5 check your download
did you flash the 1.44 hboot ?
after 69,000 plus downloads you think someone would report if it's a bad file
Click to expand...
Click to collapse
Yes I flashed the 1.44 HBOOT,
can I flash supercid with relocked bootloader?
I'll try another RUU in a bit. Does it matter that radio's dont match?
Stefan0vic said:
Yes I flashed the 1.44 HBOOT,
can I flash supercid with relocked bootloader?
I'll try another RUU in a bit. Does it matter that radio's dont match?
Click to expand...
Click to collapse
if you locked the bootloader all you can't do is flash a recovery (I think ? )
for a RUU all your really interested in is the x.xx.401.x part
clsA said:
if you locked the bootloader all you can't do is flash a recovery (I think ? )
for a RUU all your really interested in is the x.xx.401.x part
Click to expand...
Click to collapse
Tried another .401. ruu and its now giving usb error..
I have no idea what im doing wrong. Should HTC Sync be installed for this?
Stefan0vic said:
Tried another .401. ruu and its now giving usb error..
I have no idea what im doing wrong. Should HTC Sync be installed for this?
Click to expand...
Click to collapse
well if you flashed the 1.44 hboot your pc must work in fastboot
what state is the phone in when you run the RUU ? bootloader / recovery / Android OS ?
hi,
i have problem in my htc one m7 that the camera is purple, i want to send my htc to htc center, but my device rooted and s-off and superCID and i don't remember my original one. and i installed android 5.0.2
is there anyway to restore my htc to stock rom so they can not find out that i have been rooted before? and what are the steps to do that? or if there is anyway to fix my camera? i used the ISO100 option and it didn't work
Thnaks
CID... From which country you come from? Without CID I can't give you RUU with Sense ROM.
Bruce666 said:
CID... From which country you come from? Without CID I can't give you RUU with Sense ROM.
Click to expand...
Click to collapse
my old ruu support Arabic
theevilhere said:
my old ruu support Arabic
Click to expand...
Click to collapse
i think it was HTC_001
(bootloader) version: 0.5
(bootloader) version-bootloader: 1.54.0000
(bootloader) version-baseband: 4A.23.3263.28
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main:
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 4323mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e135dbf9
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
all: Done!
theevilhere said:
i think it was HTC_001
Click to expand...
Click to collapse
Your original CID can be found in the MFG partition mmcblk0p6
Better to edit your previous post to remove your IMEI and SERIALNO
alray said:
Your original CID can be found in the MFG partition mmcblk0p6
Better to edit your previous post to remove your IMEI and SERIALNO
Click to expand...
Click to collapse
i removed it.
how can i get the original CID?
theevilhere said:
i removed it.
how can i get the original CID?
Click to expand...
Click to collapse
Use an adb sheel to make a copy of mmcblk0p6
Code:
adb shell
dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6.img
Better to copy/paste the command, if you make a typo, it can be harmful to your phone.
then take the mmcblk0p6.img file on your /sdcard and send it to me, I'll tell you what your original CID was
alray said:
Use an adb sheel to make a copy of mmcblk0p6
Code:
adb shell
dd if=/dev/block/mmcblk0p6 of=/sdcard/mmcblk0p6.img
Better to copy/paste the command, if you make a typo, it can be harmful to your phone.
then take the mmcblk0p6.img file on your /sdcard and send it to me, I'll tell you what your original CID was
Click to expand...
Click to collapse
i will try to send it to you later, but where you want me to send it to you?
theevilhere said:
i will try to send it to you later, but where you want me to send it to you?
Click to expand...
Click to collapse
upload it to your dropbox/mega/google drive and send me the link via PM
@theevilhere
According to your MFG partition you sent me, you original MID is PN0711000 and your original CID is HTC__332. Your phone was manufactured 2013/09/17.
This phone was originally running software version x.xx.599.x, its a Latin America version and unfortunately, afaik, there is no RUU (or any other useful files) available for that version.
The best you can do imo, is to convert it to another version and hope they will not realize.
Even if they realize you have tampered with your phone, they might replace the camera for free, its a well known hardware defect. Some users reported that their phone (camera) were repaired under warranty even if the phone wasn't 100% stock.
alray said:
upload it to your dropbox/mega/google drive and send me the link via PM
Click to expand...
Click to collapse
i sent it to you
alray said:
@theevilhere
According to your MFG partition you sent me, you original MID is PN0711000 and your original CID is HTC__332. Your phone was manufactured 2013/09/17.
This phone was originally running software version x.xx.599.x, its a Latin America version and unfortunately, afaik, there is no RUU (or any other useful files) available for that version.
The best you can do imo, is to convert it to another version and hope they will not realize.
Even if they realize you have tampered with your phone, they might replace the camera for free, its a well known hardware defect. Some users reported that their phone (camera) were repaired under warranty even if the phone wasn't 100% stock.
Click to expand...
Click to collapse
thanks, but can you tell me the steps to return it back to stock? and ruu i should use and how am i going to set the CID
theevilhere said:
thanks, but can you tell me the steps to return it back to stock? and ruu i should use and how am i going to set the CID
Click to expand...
Click to collapse
Maybe you missed that part?
alray said:
@theevilhere
(...)
This phone was originally running software version x.xx.599.x, its a Latin America version and unfortunately, afaik, there is no RUU (or any other useful files) available for that version.
(...)
Click to expand...
Click to collapse
That mean you can't return it to stock, the only thing you can do is to convert it to another "stock version", which is not your real stock version and hope that they will not realize this.
If you want to change your CID all you need to do is
Code:
fastboot oem writecid YOUR_CID
e.g:
Code:
fastboot oem writecid HTC__332
if you want instruction about using a RUU, read nkk71's thread linked in my signature.
alray said:
Maybe you missed that part?
That mean you can't return it to stock, the only thing you can do is to convert it to another "stock version", which is not your real stock version and hope that they will not realize this.
If you want to change your CID all you need to do is
Code:
fastboot oem writecid YOUR_CID
e.g:
Code:
fastboot oem writecid HTC__332
if you want instruction about using a RUU, read nkk71's thread linked in my signature.
Click to expand...
Click to collapse
so how can i change it to another version?
theevilhere said:
so how can i change it to another version?
Click to expand...
Click to collapse
change your CID and MID to match another RUU and follow nkk71's guide in my signature.
For example you could use the x.xx.401.x version so you'll need to change your CID to HTC__001 and your MID to PN0710000 then flash the 1.28.401.7 ruu, remove the tampered flag from the bootloader and set it back to locked (not relocked). Its the closest from stock you can be.
alray said:
change your CID and MID to match another RUU and follow nkk71's guide in my signature.
For example you could use the x.xx.401.x version so you'll need to change your CID to HTC__001 and your MID to PN0710000 then flash the 1.28.401.7 ruu, remove the tampered flag from the bootloader and set it back to locked (not relocked). Its the closest from stock you can be.
Click to expand...
Click to collapse
is 1.28.401.7 ruu an international version? and does it support arabic?
theevilhere said:
is 1.28.401.7 ruu an international version? and does it support arabic?
Click to expand...
Click to collapse
.401 is the European/WWE international version (world wide english). Im pretty sure it support Arabic.
alray said:
.401 is the European/WWE international version (world wide english). Im pretty sure it support Arabic.
Click to expand...
Click to collapse
and can i change my MID ?
theevilhere said:
and can i change my MID ?
Click to expand...
Click to collapse
yes you can, there is 2 methods to change MID
using this tool from custom recovery
using "dd" commands