hello there
I have unlocked ATT htc one (PN0712000) and i wanted to change my MID to international (PN0710000). I have super CID/S-OFF and im running custom ROM. i read alot but i didnt get what exactly to do. any suggestions.. thanks
biopl said:
hello there
I have unlocked ATT htc one (PN0712000) and i wanted to change my MID to international (PN0710000). I have super CID/S-OFF and im running custom ROM. i read alot but i didnt get what exactly to do. any suggestions.. thanks
Click to expand...
Click to collapse
[TUTORIAL] How to change the MODEL ID of the HTC One including video link
biopl said:
hello there
I have unlocked ATT htc one (PN0712000) and i wanted to change my MID to international (PN0710000). I have super CID/S-OFF and im running custom ROM. i read alot but i didnt get what exactly to do. any suggestions.. thanks
Click to expand...
Click to collapse
Use this tool if you don't wanna mess with hboot: http://forum.xda-developers.com/showthread.php?t=2535365
Sent from my HTC One using Tapatalk
nkk71 said:
Use this tool if you don't wanna mess with hboot: http://forum.xda-developers.com/showthread.php?t=2535365
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
What's the difference between this and the other one above ?
Sent from my HTC One using XDA Premium 4 mobile app
biopl said:
What's the difference between this and the other one above ?
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The end result is the same, but in the TUTORIAL it's a lengthy process, and you'll have to flash an ENG hboot, which can be risky if you don't follow the steps exactly to the letter.
The tool is a flashable file (from within custom recovery), just like any custom ROM, and it has the Aroma Installer which lets you select which MID you want. Using the tool you should be done in less than a minute, whereas following the tutorial is going to take a lot longer.
My recommendation is using the tool: nice, simple, and easy, and no data loss.
Aroma sometimes gets stuck (not only with this tool, but in general), not a big deal!!, but I've had no problems, when i first wipe cache and dalvik in custom recovery, before running the tool. (or other tools)
nkk71 said:
The end result is the same, but in the TUTORIAL it's a lengthy process, and you'll have to flash an ENG hboot, which can be risky if you don't follow the steps exactly to the letter.
The tool is a flashable file (from within custom recovery), just like any custom ROM, and it has the Aroma Installer which lets you select which MID you want. Using the tool you should be done in less than a minute, whereas following the tutorial is going to take a lot longer.
My recommendation is using the tool: nice, simple, and easy, and no data loss.
Aroma sometimes gets stuck (not only with this tool, but in general), not a big deal!!, but I've had no problems, when i first wipe cache and dalvik in custom recovery, before running the tool. (or other tools)
Click to expand...
Click to collapse
thanks for clearing my doubts, i used to tool and everything went perfect.. i was wonderingn now that i have supercid, can i flash any RUU.exe ?
biopl said:
thanks for clearing my doubts, i used to tool and everything went perfect.. i was wonderingn now that i have supercid, can i flash any RUU.exe ?
Click to expand...
Click to collapse
yep, should be good to go.
and remember to stay s-off!!!
nkk71 said:
yep, should be good to go.
and remember to stay s-off!!!
Click to expand...
Click to collapse
sorry for silly question,, will this remove s-off and how to stay s-off ?
biopl said:
sorry for silly question,, will this remove s-off and how to stay s-off ?
Click to expand...
Click to collapse
No it won't remove s-off. The only way that can be done is if YOU DO IT MANUALLY, with fastboot oem writesecureflag 3.
Sent from my HTC One using Tapatalk
nkk71 said:
No it won't remove s-off. The only way that can be done is if YOU DO IT MANUALLY, with fastboot oem writesecureflag 3.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
im planning to flash RUU.exe and what should i do to stay safe and can u recommend me any RUU.
biopl said:
im planning to flash RUU.exe and what should i do to stay safe and can u recommend me any RUU.
Click to expand...
Click to collapse
so if I understand correctly, you just want a stock international HTC? (wonder why people don't like custom roms )
anyway, to get just international WWE edition, you have already have changed your MID to PN0710000, so now:
1- change CID: fastboot oem writecid HTC__001 (two underscores)
2- use the following RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
since you're s-off, you can stay UNLOCKED for RUU, and definitely stay S-Off
after running the RUU you should start getting updates immediately all the way up to 3.62 (Android 4.3); 4.4 isnt out yet for WWE.
EDIT: just noticed you're in Dubai, so maybe better to change CID to HTC__J15 (WWE GCC), so fastboot oem writecid HTC__J15
EDIT2: running the RUU will wipe EVERYTHING off your phone including pictures, music etc.
Hit the thanks button if i helped
Thanks for the reply, if I change my CID to HTC__J15, will I still be able to flash the above RUU, and will I have touch problem since I'm running latest firmwarm/Hboot, again thanks for your help made things easier
Sent from my HTC One using XDA Premium 4 mobile app
nkk71 said:
so if I understand correctly, you just want a stock international HTC? (wonder why people don't like custom roms )
anyway, to get just international WWE edition, you have already have changed your MID to PN0710000, so now:
1- change CID: fastboot oem writecid HTC__001 (two underscores)
2- use the following RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
since you're s-off, you can stay UNLOCKED for RUU, and definitely stay S-Off
after running the RUU you should start getting updates immediately all the way up to 3.62 (Android 4.3); 4.4 isnt out yet for WWE.
EDIT: just noticed you're in Dubai, so maybe better to change CID to HTC__J15 (WWE GCC), so fastboot oem writecid HTC__J15
EDIT2: running the RUU will wipe EVERYTHING off your phone including pictures, music etc.
Hit the thanks button if i helped
Click to expand...
Click to collapse
Thanks for the reply, if I change my CID to HTC__J15, will I still be able to flash the above RUU, and will I have touch problem since I'm running latest firmwarm/Hboot, again thanks for your help made things easier
biopl said:
Thanks for the reply, if I change my CID to HTC__J15, will I still be able to flash the above RUU, and will I have touch problem since I'm running latest firmwarm/Hboot, again thanks for your help made things easier
Click to expand...
Click to collapse
1- touchscreen: no problem, because a full ruu will downgrade everything
2- the RUU is made for
Code:
modelid: [B]PN0710000[/B]
cid: HTC__001, HTC__E11, HTC__102, HTC__203, HTC__405, HTC__Y13, HTC__304, HTC__032, HTC__A07, HTC__J15, HTC__016
there are minor differences in the CIDs, for example, setting HTC__001 doesn't give you Eastern European country/languages, but HTC__032 does:
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Nor
nkk71 said:
1- touchscreen: no problem, because a full ruu will downgrade everything
2- the RUU is made for
Code:
modelid: [B]PN0710000[/B]
cid: HTC__001, HTC__E11, HTC__102, HTC__203, HTC__405, HTC__Y13, HTC__304, HTC__032, HTC__A07, HTC__J15, HTC__016
there are minor differences in the CIDs, for example, setting HTC__001 doesn't give you Eastern European country/languages, but HTC__032 does:
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Nor
Click to expand...
Click to collapse
so lets say after i flash RUU and update to 4.3, will i need to root again if i wanted to install custom roms/firmwares ?
nkk71 said:
so if I understand correctly, you just want a stock international HTC? (wonder why people don't like custom roms )
anyway, to get just international WWE edition, you have already have changed your MID to PN0710000, so now:
1- change CID: fastboot oem writecid HTC__001 (two underscores)
2- use the following RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
since you're s-off, you can stay UNLOCKED for RUU, and definitely stay S-Off
after running the RUU you should start getting updates immediately all the way up to 3.62 (Android 4.3); 4.4 isnt out yet for WWE.
EDIT: just noticed you're in Dubai, so maybe better to change CID to HTC__J15 (WWE GCC), so fastboot oem writecid HTC__J15
EDIT2: running the RUU will wipe EVERYTHING off your phone including pictures, music etc.
Hit the thanks button if i helped
Click to expand...
Click to collapse
I tried and got ERROR [150]
Sent from my HTC One using XDA Premium 4 mobile app
ERROR 155*
Sent from my HTC One using XDA Premium 4 mobile app
biopl said:
ERROR 155*
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hboot 1.55? you have to downgrade to 1.44 separately first:
so download this: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
in bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <---- just in case the above said “failed flush again”
fastboot reboot-bootloader
--> and confirm hboot is now 1.44
then run ruu.exe
nkk71 said:
hboot 1.55? you have to downgrade to 1.44 separately first:
so download this: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
in bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <---- just in case the above said “failed flush again”
fastboot reboot-bootloader
--> and confirm hboot is now 1.44
then run ruu.exe
Click to expand...
Click to collapse
I think for Error 155, i need to re-lock my bootloader then flash RUU
biopl said:
I think for Error 155, i need to re-lock my bootloader then flash RUU
Click to expand...
Click to collapse
not if you are s-off
Related
Hello,
i am new to htc (not only one) and i have done s-off to my one and want to know how can i change my cid ??
udimars30 said:
Hello,
i am new to htc (not only one) and i have done s-off to my one and want to know how can i change my cid ??
Click to expand...
Click to collapse
plug your phone to pc and open command prompt
point the command prompt to your folder where u keep adb and fastboot file..
1) "adb reboot bootloader"
2) "fastboot oem writecid 11111111" **eight '1'**
3) "fastboot reboot-bootloader" and see your cid change to 11111111
randykzc said:
plug your phone to pc and open command prompt
point the command prompt to your folder where u keep adb and fastboot file..
1) "adb reboot bootloader"
2) "fastboot oem writecid 11111111" **eight '1'**
3) "fastboot reboot-bootloader" and see your cid change to 11111111
Click to expand...
Click to collapse
and if i want to change my cid to another like htc_y13 then??
udimars30 said:
and if i want to change my cid to another like htc_y13 then??
Click to expand...
Click to collapse
....then fastboot oem writecid htc__y13
the command is ( fastboot oem writecid ) the other is the cid you wanna have like htc__304 for example!
ChanceOfChange said:
....then fastboot oem writecid htc__y13
the command is ( fastboot oem writecid ) the other is the cid you wanna have like htc__304 for example!
Click to expand...
Click to collapse
if i want to go back to my original CID i.e HTC_001 and would like to get ota's for that cid then what should i do??
udimars30 said:
if i want to go back to my original CID i.e HTC_001 and would like to get ota's for that cid then what should i do??
Click to expand...
Click to collapse
Changing ONLY CID will not get you the OTA updates. For OTA, you need to change your CID, MID, flash a RUU for that CID, then OTA update it. After updating, you can change your CID and MID back to whatever you want.
ArmedandDangerous said:
Changing ONLY CID will not get you the OTA updates. For OTA, you need to change your CID, MID, flash a RUU for that CID, then OTA update it. After updating, you can change your CID and MID back to whatever you want.
Click to expand...
Click to collapse
Didn't get you, can you elaborate more!
and thanks
udimars30 said:
Didn't get you, can you elaborate more!
and thanks
Click to expand...
Click to collapse
You need to change CID, but you also need to change MID or the OTA won't install. Changing CID and MID is still not enough, because OTA will check your software version first. For example, if you change your CID to HTC__001 and MID to the correct one (I dono what is MID for HTC__001), you still can't install the OTA cos your ROM is different version than HTC__001. You need to install HTC__001 RUU, then check for OTA. Only this way you can get OTA from other regions.
UK can get Romania OTA because both their ROM version is the same, so UK can just change CID, they don't need to do so many steps
ArmedandDangerous said:
You need to change CID, but you also need to change MID or the OTA won't install. Changing CID and MID is still not enough, because OTA will check your software version first. For example, if you change your CID to HTC__001 and MID to the correct one (I dono what is MID for HTC__001), you still can't install the OTA cos your ROM is different version than HTC__001. You need to install HTC__001 RUU, then check for OTA. Only this way you can get OTA from other regions.
UK can get Romania OTA because both their ROM version is the same, so UK can just change CID, they don't need to do so many steps
Click to expand...
Click to collapse
Mine is HTC__001 and I want to change to HTC__Y13 which is having same MID so what all should I do to get 4.2.2 OTA??
Sent from my HTC One using Tapatalk 4 Beta
Hi Guys
i acquired a few days ago a new cell
ONE HTC m7 32GB
with these characteristics
m7_ul pvt ship s0ff rh
MID : PN07120
CID-BS_US001
Hboot 1.44.0000
open dsp v 26.120.274.0202
emm boot
but.... i upgrade to the European version (to update to 4.2.2)
PN0710000
changing the
CID to PN0710000 and MID to HTC__304
before I realized the problem of the camera (blurring and noise at night)
and thought it was normal.
now I want to go back and can not find the official firmware anywhere
now im in 4.2.2
Pleas Help me!
CID should be HTC__001 and MID PN0710000
Then get the 1.28.401.7 RUU and flash that and then get the OTAs to get to 2.24.401.8 and you're good to go
EddyOS said:
CID should be HTC__001 and MID PN0710000
Then get the 1.28.401.7 RUU and flash that and then get the OTAs to get to 2.24.401.8 and you're good to go
Click to expand...
Click to collapse
but my Original data are exept SOFF
m7_ul pvt ship s0ff rh
MID : PN07120
CID-BS_US001
Hboot 1.44.0000
open dsp v 26.120.274.0202
emm boot
isma907 said:
but my Original data are exept SOFF
m7_ul pvt ship s0ff rh
MID : PN07120
CID-BS_US001
Hboot 1.44.0000
open dsp v 26.120.274.0202
emm boot
Click to expand...
Click to collapse
flash original RUU and you are ok. keep s-off , is a good thing
in fastboot : fastboot oem writecid BS_US001
fastboot oem writemid PN07120
criszz said:
flash original RUU and you are ok. keep s-off , is a good thing
in fastboot : fastboot oem writecid BS_US001
fastboot oem writemid PN07120
Click to expand...
Click to collapse
the problem is that:
I cant find my firmware version / and i am NOOBie to HTC come from Samsung
for that reason i need more details XD (would be very grateful)
who is my official RUU? in this case?
isma907 said:
the problem is that:
I cant find my firmware version / and i am NOOBie to HTC come from Samsung
for that reason i need more details XD (would be very grateful)
who is my official RUU? in this case?
Click to expand...
Click to collapse
you can do fastboot comand and set your cid/mid at ant time without stock ruu, but look here, you will find right ruu >> http://forum.xda-developers.com/showthread.php?p=39588860
criszz said:
you can do fastboot comand and set your cid/mid at ant time without stock ruu, but look here, you will find right ruu >> http://forum.xda-developers.com/showthread.php?p=39588860
Click to expand...
Click to collapse
my model is not on the list you say
isma907 said:
my model is not on the list you say
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=40672030&postcount=6
criszz said:
http://forum.xda-developers.com/showpost.php?p=40672030&postcount=6
Click to expand...
Click to collapse
sorry for my ignorance
but i dont know who is my model i read the list but is not here
could you give me, what would be my model in this case? sorry for disturb
my htc is not 64gb ... is a 32Gb.. this worK?
BS_US001 is the Dev Edition; if that was original CID before you did anything, then the Dev Edition RUU is what you want!
wmg316 said:
BS_US001 is the Dev Edition; if that was original CID before you did anything, then the Dev Edition RUU is what you want!
Click to expand...
Click to collapse
SO... first i need to flash the RUU
and later write CID AND MID?
isma907 said:
SO... first i need to flash the RUU
and later write CID AND MID?
Click to expand...
Click to collapse
The RUU checks cid and mid for compatibility. The only reason you are changing them is to flash the RUU.
AT&T HTC M7ul
Baad Newz's InsertCoin 3.4-2
Flar2's Bulletproof 6.2
Hello - this is the first time I have posted a question on these forums and initially I want to apologise for my noobyness and if I have made any errors in where I am posting or how I am posting.
My intention is to remove the Vodafone branding from my HTC One. By this I am referring to the splash screen and the Vodafone apps. I do NOT want to root the phone. I do not want to root the phone because I use the Sky Go app an awful lot, and it does not play well with rooted phones - I am sure everyone knows this.
From reading these forums it would seem that I might be able to achieve this by flashing the stock HTC ROM without rooting the device, is this correct or have I misunderstood the situation? If it is correct I should be able to manage this myself as I have unlocked the bootloader and it seems I just need to install CWM and flash the stock ROM? I do not have 100% faith that I have understood this correctly so am looking for clarification or any other suggestions and feedback.
Hope someone can help, and I am really sorry if I have in someway broken any rules or made some kind of hilarious noob errors!
Cheers
mynameisthehulk said:
Hello - this is the first time I have posted a question on these forums and initially I want to apologise for my noobyness and if I have made any errors in where I am posting or how I am posting.
My intention is to remove the Vodafone branding from my HTC One. By this I am referring to the splash screen and the Vodafone apps. I do NOT want to root the phone. I do not want to root the phone because I use the Sky Go app an awful lot, and it does not play well with rooted phones - I am sure everyone knows this.
From reading these forums it would seem that I might be able to achieve this by flashing the stock HTC ROM without rooting the device, is this correct or have I misunderstood the situation? If it is correct I should be able to manage this myself as I have unlocked the bootloader and it seems I just need to install CWM and flash the stock ROM? I do not have 100% faith that I have understood this correctly so am looking for clarification or any other suggestions and feedback.
Hope someone can help, and I am really sorry if I have in someway broken any rules or made some kind of hilarious noob errors!
Cheers
Click to expand...
Click to collapse
To achieve a debrand you might need S-off, getting supercid, and flashing another rom. If you are already unlocked, why you wouldn't want root?
Maybe you are referring to a RUU flashing, but since you are S-on you could only reflash a stock rom same as yours (and still get ota's)
If you don't care about ota's i suggest you to flash the lastest Android Revolution 51 based on 4.4.2, that is IDENTICAL to stock just faster and snappier, and you will get rid of that apps. (not sure if for splash screen you need s-off or not)
Uxepro said:
To achieve a debrand you might need S-off, getting supercid, and flashing another rom. If you are already unlocked, why you wouldn't want root?
Maybe you are referring to a RUU flashing, but since you are S-on you could only reflash a stock rom same as yours (and still get ota's)
If you don't care about ota's i suggest you to flash the lastest Android Revolution 51 based on 4.4.2, that is IDENTICAL to stock just faster and snappier, and you will get rid of that apps. (not sure if for splash screen you need s-off or not)
Click to expand...
Click to collapse
I appreciate your response!
As stated, I simply cannot root as the Sky Go app is not compatible with rooted devices and I use it all the time. It seems as though it might not be as simple as I originally hoped which is a shame but it might be something that I just put up with. Perhaps there will be some other suggestions but once again, thanks for taking the time to help.
mynameisthehulk said:
I appreciate your response!
As stated, I simply cannot root as the Sky Go app is not compatible with rooted devices and I use it all the time. It seems as though it might not be as simple as I originally hoped which is a shame but it might be something that I just put up with. Perhaps there will be some other suggestions but once again, thanks for taking the time to help.
Click to expand...
Click to collapse
To do what you suggest (complete debranding) you need to S-Off, depending on your situation you will need to use one of the three methods now available
1- revone
2- rumrunner
3- firewater
Once you are S-Off, you can change CID to unbranded (MID won't need changing as it should be PN0710000 already for you) and then flash/run a full international unbranded RUU. That WILL completely debrand your phone, including any splash screens, bloatware, carrier specific apps.
If you stay on the international RUU, you will receive OTA updates as and when they become available.
If you have any other questions let me know
nkk71 said:
To do what you suggest (complete debranding) you need to S-Off, depending on your situation you will need to use one of the three methods now available
1- revone
2- rumrunner
3- firewater
Once you are S-Off, you can change CID to unbranded (MID won't need changing as it should be PN0710000 already for you) and then flash/run a full international unbranded RUU. That WILL completely debrand your phone, including any splash screens, bloatware, carrier specific apps.
If you stay on the international RUU, you will receive OTA updates as and when they become available.
If you have any other questions let me know
Click to expand...
Click to collapse
Hey, again thanks for responding - I have a few questions and apologies once more for being a bit green!
I have hboot 1.55 so from what I have read I need to use the rumrunner method and in order to do this I would need to root the phone first, could you clarify that for me? If this is the case is there a possibility to unroot the phone after the process is complete so that I can continue to use the Sky Go app?
If so then it would seem that I would have to proceed as follows -
1 - Root device
2 - S-off using rumrunner
3 - Change CID to unbranded
4 - Flash international RUU
5 - Unroot device
That sound about right?
Thanks again, really appreciate this.
mynameisthehulk said:
Hey, again thanks for responding - I have a few questions and apologies once more for being a bit green!
I have hboot 1.55 so from what I have read I need to use the rumrunner method and in order to do this I would need to root the phone first, could you clarify that for me? If this is the case is there a possibility to unroot the phone after the process is complete so that I can continue to use the Sky Go app?
If so then it would seem that I would have to proceed as follows -
1 - Root device
2 - S-off using rumrunner
3 - Change CID to unbranded
4 - Flash international RUU
5 - Unroot device
That sound about right?
Thanks again, really appreciate this.
Click to expand...
Click to collapse
Ruu will unroot the device for you .. it's a complete wipe
Brilliant everyone! Thank you - gives me something to do this evening
mynameisthehulk said:
Brilliant everyone! Thank you - gives me something to do this evening
Click to expand...
Click to collapse
MID is probably PN0710000, so:
1- make a "fastboot getvar all", keep this for the record
2- make note of CID, MID, and version-main (your firmware)
3- unlock bootloader (HTCdev)
4- install a custom recovery CWM or TWRP
5- install a ROM consistent with your firmware version (preferably rooted and unsecured kernel)
6- get S-Off
7- change CID, using "fastboot oem writecid HTC__001" <- two underscores, CID is always 8 chars!! here's a list of unbranded CID, depending on the language packs you want you may choose other than HTC__001
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Nor
8- (optional): reset bootloader to LOCKED and unTAMPERED, using http://www.htc1guru.com/guides/guru-bootloader-reset/
(there are also other methods, but i guess this would be the easiest)
(personally I just removed TAMPERED, but keep my bootloader UNLOCKED)
9- RUU.ZIP: http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
rename to ruu.zip, then flash in bootloader/FASTBOOT USB
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE, the first one will report “failed flush again”, the second one will succeed.
fastboot reboot-bootloader
done, take OTAs to 4.4.2
STAY S-OFF
nkk71 said:
MID is probably PN0710000, so:
1- make a "fastboot getvar all", keep this for the record
2- make note of CID, MID, and version-main (your firmware)
3- unlock bootloader (HTCdev)
4- install a custom recovery CWM or TWRP
5- install a ROM consistent with your firmware version (preferably rooted and unsecured kernel)
6- get S-Off
7- change CID, using "fastboot oem writecid HTC__001" <- two underscores, CID is always 8 chars!! here's a list of unbranded CID, depending on the language packs you want you may choose other than HTC__001
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Nor
8- (optional): reset bootloader to LOCKED and unTAMPERED, using http://www.htc1guru.com/guides/guru-bootloader-reset/
(there are also other methods, but i guess this would be the easiest)
(personally I just removed TAMPERED, but keep my bootloader UNLOCKED)
9- RUU.ZIP: http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
rename to ruu.zip, then flash in bootloader/FASTBOOT USB
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE, the first one will report “failed flush again”, the second one will succeed.
fastboot reboot-bootloader
done, take OTAs to 4.4.2
STAY S-OFF
Click to expand...
Click to collapse
Oh! That gets a bit more complicated, I am going to have to look up quite a lot of stuff before I get started! Thanks again though!
nkk71 said:
MID is probably PN0710000, so:
1- make a "fastboot getvar all", keep this for the record
2- make note of CID, MID, and version-main (your firmware)
3- unlock bootloader (HTCdev)
4- install a custom recovery CWM or TWRP
5- install a ROM consistent with your firmware version (preferably rooted and unsecured kernel)
6- get S-Off
7- change CID, using "fastboot oem writecid HTC__001" <- two underscores, CID is always 8 chars!! here's a list of unbranded CID, depending on the language packs you want you may choose other than HTC__001
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Nor
8- (optional): reset bootloader to LOCKED and unTAMPERED, using http://www.htc1guru.com/guides/guru-bootloader-reset/
(there are also other methods, but i guess this would be the easiest)
(personally I just removed TAMPERED, but keep my bootloader UNLOCKED)
9- RUU.ZIP: http://www.htc1guru.com/dld/ruu-zip...1-27_10-31-1131-05_release_310878_signed-zip/
rename to ruu.zip, then flash in bootloader/FASTBOOT USB
fastboot oem rebootRUU
fastboot flash zip ruu.zip
fastboot flash zip ruu.zip <- yes TWICE, the first one will report “failed flush again”, the second one will succeed.
fastboot reboot-bootloader
done, take OTAs to 4.4.2
STAY S-OFF
Click to expand...
Click to collapse
Why You write don't take 4.4.2 OTA update? Can you write more? Thanks
mynameisthehulk said:
Brilliant everyone! Thank you - gives me something to do this evening
Click to expand...
Click to collapse
Hire you have same question http://forum.xda-developers.com/showthread.php?t=2625342
When You done please write me how's going, I need do this as well.
Wielki.Brat said:
Why You write don't take 4.4.2 OTA update? Can you write more? Thanks
Hire you have same question http://forum.xda-developers.com/showthread.php?t=2625342
When You done please write me how's going, I need do this as well.
Click to expand...
Click to collapse
1- "Why You write don't take 4.4.2 OTA update?" --> i said "done" (as in "all done", "finished", "completed", etc), i did not write "don't" as in "do not"
2- I believe I answered your questions in your thread http://forum.xda-developers.com/showthread.php?t=2625342 if i missed a question, let me know
3- you didn't hire me, as far as i know
4- a little courtesy wouldn't be bad either
nkk71 said:
1- "Why You write don't take 4.4.2 OTA update?" --> i said "done" (as in "all done", "finished", "completed", etc), i did not write "don't" as in "do not"
2- I believe I answered your questions in your thread http://forum.xda-developers.com/showthread.php?t=2625342 if i missed a question, let me know
3- you didn't hire me, as far as i know
4- a little courtesy wouldn't be bad either
Click to expand...
Click to collapse
I'm sorry for misunderstand this, yep you got wright, where I see " don't " word
2- yep you answered alll my question and each time I press "ThanksYou" button
Thanks again
Wielki.Brat said:
I'm sorry for misunderstand this, yep you got wright, where I see " don't " word
Click to expand...
Click to collapse
Hey mate
Can you stick to dealing with whatever issues you have on your thread? These guys have been really helpful to me and I could do without you confusing the situation by not reading things properly and by being impolite.
Cheers
mynameisthehulk said:
Hey mate
Can you stick to dealing with whatever issues you have on your thread? These guys have been really helpful to me and I could do without you confusing the situation by not reading things properly and by being impolite.
Cheers
Click to expand...
Click to collapse
I'm just misunderstand him about this OTA update and I say "sorry" already for that, I know that he is very helpfule because he help me lot already and I say Thank You many time for that.
Ok mate ! sorry for off topic in your thread.
ROM selection for S-off
Hi Nkk 71,
In a previous message, for getting S-off and debrand, you mentionnned:
nkk71 said:
.../...
5- install a ROM consistent with your firmware version (preferably rooted and unsecured kernel)
6- get S-Off
7- change CID ...
.../...
Click to expand...
Click to collapse
I have currently no luck with an Orange branded stock ROM (15 August 2013) coming with my new HTC One.
OS 2.24.73.8, hboot 1.54, Androïd 4.2.2, Kernel 3.4.10, CID ORANG202, MID PN0710000
What I currently get:
1) Htc dev unlocked- OK
2) Rumrunner 0.5 : must ferment longer (2x)... then ERROR: looks like device is not rooted AND lacks an unsecure kernel
3) Firewater (temproot method) :
Root acquired, thanks HTC ... OK
12 bottles opened, still no buzz NOK
According to my configuration and your point 5, which ROM should I install ?
Thank you for your expert advice.
Kind regards.
chano22000 said:
Hi Nkk 71,
In a previous message, for getting S-off and debrand, you mentionnned:
I have currently no luck with an Orange branded stock ROM (15 August 2013) coming with my new HTC One.
OS 2.24.73.8, hboot 1.54, Androïd 4.2.2, Kernel 3.4.10, CID ORANG202, MID PN0710000
What I currently get:
1) Htc dev unlocked- OK
2) Rumrunner 0.5 : must ferment longer (2x)... then ERROR: looks like device is not rooted AND lacks an unsecure kernel
3) Firewater (temproot method) :
Root acquired, thanks HTC ... OK
12 bottles opened, still no buzz NOK
According to my configuration and your point 5, which ROM should I install ?
Thank you for your expert advice.
Kind regards.
Click to expand...
Click to collapse
between your points 1 and 2:
i- install a custom recovery, TWRP 2.6.3.3 is popular these days: http://techerrata.com/browse/twrp2/m7 (make sure not use a download manager on that site and check MD5)
ii- then install SuperSU: http://download.chainfire.eu/supersu (from this thread: http://forum.xda-developers.com/showthread.php?t=1538053)
and try again, remember to keep an eye on the phone if a superuser prompt comes up, you have to grant it.
should work after that,
but if it still says "ERROR: looks like device is not rooted AND lacks an unsecure kernel" then you may need to flash a custom kernel, such as ElementalX-m7-3.12.1 from here: http://forum.xda-developers.com/showthread.php?t=2249774
nkk71 said:
between your points 1 and 2:
i- install a custom recovery, TWRP 2.6.3.3 is popular these days: http://techerrata.com/browse/twrp2/m7 (make sure not use a download manager on that site and check MD5)
ii- then install SuperSU: http://download.chainfire.eu/supersu (from this thread: http://forum.xda-developers.com/showthread.php?t=1538053)
and try again, remember to keep an eye on the phone if a superuser prompt comes up, you have to grant it.
should work after that,
but if it still says "ERROR: looks like device is not rooted AND lacks an unsecure kernel" then you may need to flash a custom kernel, such as ElementalX-m7-3.12.1 from here: http://forum.xda-developers.com/showthread.php?t=2249774
Click to expand...
Click to collapse
Hi nkk 71,
Thanks a lot for your feedback. The versions you mention for TWRP and if necessary the ROM are totally compatible with my current sw configuration (incl Orange cid) ?
Please excude me for being very cautious but I am still an Android rookie !
Regards.
chano22000 said:
Hi nkk 71,
Thanks a lot for your feedback. The versions you mention for TWRP and if necessary the ROM are totally compatible with my current sw configuration (incl Orange cid) ?
Please excude me for being very cautious but I am still an Android rookie !
Regards.
Click to expand...
Click to collapse
Yes,
* TWRP 2.6.3.3 is compatible with any M7_U or M7_UL model (ie MID PN0710000=M7_UL)
* SuperSU is also compatible
* (if needed) ElementalX-m7-3.12.1 is made for "Google Play Edition and Sense 5 Android 4.2.2" (ie 2.xx.xxx.x)
Hi all
Thanks for all taking the time to reply to this, I have decided not to proceed. I simply do not have the required level of knowledge to feel confident enough to proceed or the time necessary to acquire the required level of knowledge. I wanted to debrand in order to get a better price when selling the phone, however it's not going to be worth much if I brick it! Would probably only gone for £10/£15 more anyway so not worth the risk. Thanks again though - love XDA - I'll make sure my next handset is unlocked I think
Hi there,
I´m from Europe and bought an HTC One in Australia (64GB).
I tried to change the Firmware to the EU-Version but it doesn´t fully work.
What I´ve done:
Unlocked via HTC DEV
Installed TWRP
Rooted via TWRP
Installed Stock EU 4.19.401.11 from androidrevolution.org via TWRP
It works so far but I can´t change to any other languages than English (Australian, New Zealand, US) and three asian languages.
What did I do wrong? Or do I need some other firmware?
Thanks, for your help!
HodnZack said:
Hi there,
I´m from Europe and bought an HTC One in Australia (64GB).
I tried to change the Firmware to the EU-Version but it doesn´t fully work.
What I´ve done:
Unlocked via HTC DEV
Installed TWRP
Rooted via TWRP
Installed Stock EU 4.19.401.11 from androidrevolution.org via TWRP
It works so far but I can´t change to any other languages than English (Australian, New Zealand, US) and three asian languages.
What did I do wrong? Or do I need some other firmware?
Thanks, for your help!
Click to expand...
Click to collapse
1- changing firmware you need to be S-Off
2- but it won't affect the languages, that's CID dependent which can only be changed if you're S-Off
but you have easier alternatives:
1- use a Play Store app called More Locale
2- edit the xml files in /system/customize/CID
3- or in my opinion the best, just install ARHD 53.0 (if you want 4.19.401.11 Android 4.4.2)
As far as my phone info is correct I already changed the firmware to 4.19.401.11 or do I misunderstand something?
Is there any way to fully change my firmware to the current EU-Version? With OTA and everything?
HodnZack said:
As far as my phone info is correct I already changed the firmware to 4.19.401.11 or do I misunderstand something?
Click to expand...
Click to collapse
the firmware shows in "fastboot getvar all", and what shows in Settings -> About is just the version the ROM is based on. installing a ROM doesn't change firmware.
HodnZack said:
Is there any way to fully change my firmware to the current EU-Version? With OTA and everything?
Click to expand...
Click to collapse
Yes it is possible, but only if you are S-Off.
nkk71 said:
the firmware shows in "fastboot getvar all", and what shows in Settings -> About is just the version the ROM is based on. installing a ROM doesn't change firmware.
Click to expand...
Click to collapse
Oh, okay. Thanks for the info :good:
nkk71 said:
Yes it is possible, but only if you are S-Off.
Click to expand...
Click to collapse
If I do so, what do I need to do further? Changing ModelId and CID and flash the Stock EU-RUU?
HodnZack said:
Oh, okay. Thanks for the info :good:
If I do so, what do I need to do further? Changing ModelId and CID and flash the Stock EU-RUU?
Click to expand...
Click to collapse
Yes exactly,
1- you change CID by using:
fastboot oem writecid HTC__001 <- two underscores, CID has to be exactly 8 chars
fastboot reboot-bootloader
2- you change MID by using this tool (in a custom recovery): http://forum.xda-developers.com/showthread.php?t=2535365
for a list of possible EU unbranded CIDs (which will affect the language/country available for selection)
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Nor
Once S-Off, do NOT go back S-On!!
Alright I´m gonna give this a try :fingers-crossed: Thanks!
Do you know where to get the current stock EU-RUU? I guess the stock one from androidrevolution I´ve downloaded isn´t as stock as I thought...
HodnZack said:
Alright I´m gonna give this a try :fingers-crossed: Thanks!
Do you know where to get the current stock EU-RUU? I guess the stock one from androidrevolution I´ve downloaded isn´t as stock as I thought...
Click to expand...
Click to collapse
yeah you should go for a full ruu, not just a ROM: http://www.htc1guru.com/downloads/ruu-file-downloads/
(but only do this once you've changed MID to PN0710000 and CID to your liking, as the RUU will overwrite everything (and also wipe your phone)
x.xx.401.x are international unbranded RUU, I would recommend the 1.28.401.7.
You should take a look at my guide (though intended mostly for warranty), most things will be the same for you: http://forum.xda-developers.com/showthread.php?t=2541082
just skip the S-On part!!! and also no need to LOCK bootloader if you're S-Off.
Thanks a lot! You´ve really helped me :good:
HodnZack said:
Thanks a lot! You´ve really helped me :good:
Click to expand...
Click to collapse
No problem
If something is unclear better to ask first, before doing something bad
hello, imma cut it short :
i have an m7_u, i want to go back to stock , so i can update the phone, so it updates my firmware by itself ( no flashing manual cuz i dnt want to risk a brick.. here's my getvar :
(bootloader) version-baseband: 4A.20.3263.16
(bootloader) version-cpld: None
(bootloader) version-microp: None
(bootloader) version-main: 3.25.599.2
(bootloader) version-misc: PVT SHIP S-OFF
(bootloader) serialno:
(bootloader) imei:
(bootloader) meid: 00000000000000
(bootloader) product: m7_u
(bootloader) platform: HBOOT-8064
(bootloader) modelid: PN0711000
(bootloader) cidnum: 11111111
(bootloader) battery-status: good
(bootloader) battery-voltage: 3742mV
(bootloader) partition-layout: Generic
(bootloader) security: off
(bootloader) build-mode: SHIP
(bootloader) boot-mode: FASTBOOT
(bootloader) commitno-bootloader: dirty-e0349bfc
(bootloader) hbootpreupdate: 11
(bootloader) gencheckpt: 0
Click to expand...
Click to collapse
i want to use the simpe method, ruu.exe
how to know my ruu ?
what do i need to do before running the ruu ? like , lock bootloader , go back s-on ? anything ?
any help is apretiated , thanks alot !
ali-k95 said:
hello, imma cut it short :
i have an m7_u, i want to go back to stock , so i can update the phone, so it updates my firmware by itself ( no flashing manual cuz i dnt want to risk a brick.. here's my getvar :
i want to use the simpe method, ruu.exe
how to know my ruu ?
what do i need to do before running the ruu ? like , lock bootloader , go back s-on ? anything ?
any help is apretiated , thanks alot !
Click to expand...
Click to collapse
like said in your other thread, there is no RUU for .599 version.
NEVER go back s-on
you don't need to lock the bootloader to use a RUU because you have S-OFF
just make sure both your CID and MID match the ruu you want to use, if not you can change both of these values, thanks to S-OFF.
alray said:
like said in your other thread, there is no RUU for .599 version.
NEVER go back s-on
you don't need to lock the bootloader to use a RUU because you have S-OFF
just make sure both your CID and MID match the ruu you want to use, if not you can change both of these values, thanks to S-OFF.
Click to expand...
Click to collapse
Can you send me a link to the ruu ? and how to know to what cid and mid i shoud change ?
can it be more like
1-..
2-...
3-... steps ? thankss
ali-k95 said:
Can you send me a link to the ruu ?
Click to expand...
Click to collapse
You have s-off which mean you can use every ruu intended for M7_UL or M7_U phones.
http://www.htc1guru.com/
and how to know to what cid and mid i shoud change ?
Click to expand...
Click to collapse
CID and MID must match the ruu you will use.
i.e, if you want to use a .401 ruu, cid should be HTC__001 and MID PN0710000
if you want to use dev eidtion, cid: BS_US001 mid: PN0712000
etc
etc
can it be more like
1-..
2-...
3-... steps ?
Click to expand...
Click to collapse
choose the ruu.exe or ruu.zip you want to use
does your cid match the ruu you want to use? yes go to next step, no: change your cid
Code:
fastboot oem writecid <insert correct cid here>
fastboot reboot-bootloader
does your mid match the ruu you want to use? yes: go to next step, no:change your mid
flash the ruu.exe or ruu.zip
ruu.exe ---> lauch the .exe and follow instructions
ruu.zip ---->
Code:
fastboot oem rebootRUU
fastboot flash zip name_of_ruu.zip
fastboot flash zip name_of_ruu.zip
fastboot reboot
alray said:
You have s-off which mean you can use every ruu intended for M7_UL or M7_U phones.
http://www.htc1guru.com/
CID and MID must match the ruu you will use.
i.e, if you want to use a .401 ruu, cid should be HTC__001 and MID PN0710000
if you want to use dev eidtion, cid: BS_US001 mid: PN0712000
etc
etc
choose the ruu.exe or ruu.zip you want to use
does your cid match the ruu you want to use? yes go to next step, no: change your cid
Code:
fastboot oem writecid <insert correct cid here>
fastboot reboot-bootloader
does your mid match the ruu you want to use? yes: go to next step, no:change your mid
flash the ruu.exe or ruu.zip
ruu.exe ---> lauch the .exe and follow instructions
ruu.zip ---->
Code:
fastboot oem rebootRUU
fastboot flash zip name_of_ruu.zip
fastboot flash zip name_of_ruu.zip
fastboot reboot
Click to expand...
Click to collapse
This is what i'm talking about !
so , is this okaii ?
RUU M7 UL K44 SENSE55 MR HTC Europe 4.19.401.9 R Radio 4A.23.3263.28 10.38r.1157.04L Release 353069 Signed 2-1
Click to expand...
Click to collapse
if that's not a good one , give me a link or something ?
Comments: modelid: PN0710000
cid: HTC__001, HTC__E11
HTC__102, HTC__203
HTC__405, HTC__Y13
HTC__304, HTC__032
HTC__A07, HTC__J15
HTC__016
Click to expand...
Click to collapse
i can choose whatever cid of those , and just that 1 MID , and change my phone's to them , run ruu , the phone is stock , i get an update , udpate it , firmware is updated , and then unlock bootloader again ( in case it relocks by itself due to ruu ) , flash recovery , flash rom again.. is that right ?
ali-k95 said:
This is what i'm talking about !
so , is this okaii ?
if that's not a good one , give me a link or something ?
i can choose whatever cid of those , and just that 1 MID , and change my phone's to them , run ruu , the phone is stock , i get an update , udpate it , firmware is updated , and then unlock bootloader again ( in case it relocks by itself due to ruu ) , flash recovery , flash rom again.. is that right ?
Click to expand...
Click to collapse
the ruu you have linked have PN0710000 and yours is PN0711000, so you'll need to change your mid to use that one. Follow the guide to change mid, its pretty easy to do. Yes you can choose whater cid of those but i'll recommend you to use HTC__001 (don't forget its 2 underscore __ 8 characters total). The bootloader will not relocks by itself
alray said:
the ruu you have linked have PN0710000 and yours is PN0711000, so you'll need to change your mid to use that one. Follow the guide to change mid, its pretty easy to do. Yes you can choose whater cid of those but i'll recommend you to use HTC__001 (don't forget its 2 underscore __ 8 characters total). The bootloader will not relocks by itself
Click to expand...
Click to collapse
Alright , so imma change MID and CID then just run the ruu
downloading it right now , might take a while.. thanks ! i'll re post any new things
alray said:
the ruu you have linked have PN0710000 and yours is PN0711000, so you'll need to change your mid to use that one. Follow the guide to change mid, its pretty easy to do. Yes you can choose whater cid of those but i'll recommend you to use HTC__001 (don't forget its 2 underscore __ 8 characters total). The bootloader will not relocks by itself
Click to expand...
Click to collapse
everything is done ! i changed MID and CID to PN0710000 & HTC__001 respectivly .. now all i have to do is download the ruu i posted and run it right ?
alray said:
the ruu you have linked have PN0710000 and yours is PN0711000, so you'll need to change your mid to use that one. Follow the guide to change mid, its pretty easy to do. Yes you can choose whater cid of those but i'll recommend you to use HTC__001 (don't forget its 2 underscore __ 8 characters total). The bootloader will not relocks by itself
Click to expand...
Click to collapse
Okaii, so i have the ruu file, i ran it, htc went to silver htc screen , then it gave a 155 error.. What ?
( Note : phone is still okaii , nothing wrong happened )
ali-k95 said:
Okaii, so i have the ruu file, i ran it, htc went to silver htc screen , then it gave a 155 error.. What ?
( Note : phone is still okaii , nothing wrong happened )
Click to expand...
Click to collapse
Lock your bootloader, HTC ruu requires it, even if you are s-off
What I don't get is after you have updated your Rom, firmware, and hboot, you are then going to flash a custom Rom ??????
You are making things very difficult and complicated for yourself, just manually update your firmware.
Seanie280672 said:
Lock your bootloader, HTC ruu requires it, even if you are s-off
What I don't get is after you have updated your Rom, firmware, and hboot, you are then going to flash a custom Rom ??????
You are making things very difficult and complicated for yourself, just manually update your firmware.
Click to expand...
Click to collapse
the problem is that i read some people had bricks upgrading manually through firmware.zip files , so let the ruu make it for me , the ota , then i'll just unlock it again , flash custom recovery and custom rom .. ik it's complicated but i have no htc service here if i bricked my phone so yeah :/
Seanie280672 said:
Lock your bootloader, HTC ruu requires it, even if you are s-off
What I don't get is after you have updated your Rom, firmware, and hboot, you are then going to flash a custom Rom ??????
You are making things very difficult and complicated for yourself, just manually update your firmware.
Click to expand...
Click to collapse
EDIT : i relocked it and it's still not working . error 155 , i guess imma try now firmware.zip method ?
( i unlocked bootloader again , changed cid back to 11111111 .. what to do now with MID ? and can i go for this firmware fw_6.06.401.1_custom.zip
or should i use this fw_5.11.401.10_custom.zip ?
thanks.
EDIT : i opened firmware.zip and checked for the mid's, mine was there , so i did it and it went okaii
i'm updated now , thanks all for the help
just one more q. , can i updat fw_6.06.401.1_custom.zip ( i'm on fw_5.11.401.10_custom.zip ) if my ROM is still on fw_5.11.401.10_custom.zip ? thanks.
ali-k95 said:
EDIT : i relocked it and it's still not working . error 155 , i guess imma try now firmware.zip method ?
( i unlocked bootloader again , changed cid back to 11111111 .. what to do now with MID ? and can i go for this firmware fw_6.06.401.1_custom.zip
or should i use this fw_5.11.401.10_custom.zip ?
thanks.
EDIT : i opened firmware.zip and checked for the mid's, mine was there , so i did it and it went okaii
i'm updated now , thanks all for the help
just one more q. , can i updat fw_6.06.401.1_custom.zip ( i'm on fw_5.11.401.10_custom.zip ) if my ROM is still on fw_5.11.401.10_custom.zip ? thanks.
Click to expand...
Click to collapse
as your s-off you can upgrade and downgrade as you please, ive heard the radio file contained in the new firmware is the best to date.
Here's a handy one to add to your bookmarks: http://forum.xda-developers.com/showthread.php?t=2316726
NEVER S-ON, with the custom firmware's, if you s-on, you will have an instant brick due to the modded HBOOT.