Database Develop

[Q] Flashing RUU

Okay - time to swallow my man pride and ask for directions...
My current software version is 1.28.61.7 and CID was Orang001 - realising that EE were not going to be releasing the 4.2.2 update anytime soon, I decided to try and follow the advice of you bright chaps...
Following the steps in the:
[Official Chat] thread (past 2): http://forum.xda-developers.com/showpost.php?p=42086559&postcount=2; and
Revone guide: http://forum.xda-developers.com/showthread.php?t=2314582,
I have been able to:
Unlock my device (and turn tamper off);
obtain S-OFF;
Change my CID to HTC__001 (and change it to the SuperCID: 11111111 if required),
All going well so far - now the next step was to run RUU 1.28.401.7 and wait for the OTA - unfortunately this is where I am stuck...
I downloaded the RUU from the following site: http://www.androidfiles.org/ruu/?developer=M7 (as the buggsylawson site appears to be down) and ran it. The RUU seemed to have installed without a hitch - no errors at all, however when I check my software number it is still 1.28.61.7.
Having spent a few hours reading these forums, I finally admit defeat - please help - what should I do next? What is the best way to update, remaining stock and OTA to 4.2.2?
In case it helps, my current kernel version is:
3.4.10 -gddcfb8c
[email protected] #1
SMP PREEMPT
Thank you in advance!
_________________
Update: tried running the RUU again with CID: 11111111 - still stuck on 1.28.61.7

Did u check for OTA?
Sent from my HTC One using xda premium

mathrania said:
Did u check for OTA?
Sent from my HTC One using xda premium
Click to expand...
Click to collapse
That's not the point.
To the OP: Change the CID to 11111111 and try to flash the RUU again (if you haven't already). Knowing the kernel is pointless too, the important information is the software build, e.g. 1.28.401.7

EddyOS said:
That's not the point.
To the OP: Change the CID to 11111111 and try to flash the RUU again (if you haven't already). Knowing the kernel is pointless too, the important information is the software build, e.g. 1.28.401.7
Click to expand...
Click to collapse
Thanks for the response, trying this again now - I'll let you know the result.

EddyOS said:
That's not the point.
To the OP: Change the CID to 11111111 and try to flash the RUU again (if you haven't already). Knowing the kernel is pointless too, the important information is the software build, e.g. 1.28.401.7
Click to expand...
Click to collapse
Just finished running the RUU with CID 11111111 - still stuck on 1.28.61.7.
Really quite stumped...

It's pretty much impossible so not sure what's going on!

Clutching at straws here...
Any chance that I don't have the right RUU and it is only updating certain elements?
The RUU downloaded is: RUU_M7_UL_JB_50_HTC_Europe_1.28.401.7_Radio_4A.13.3231.27_10.31.1131.05_release_310878_signed.exe
991 MB from http://www.androidfiles.org/ruu/?developer=M7
If so, where can I get the correct RUU or another for testing?
Thanks

[Q] Changing MID

hello there
I have unlocked ATT htc one (PN0712000) and i wanted to change my MID to international (PN0710000). I have super CID/S-OFF and im running custom ROM. i read alot but i didnt get what exactly to do. any suggestions.. thanks

biopl said:
hello there
I have unlocked ATT htc one (PN0712000) and i wanted to change my MID to international (PN0710000). I have super CID/S-OFF and im running custom ROM. i read alot but i didnt get what exactly to do. any suggestions.. thanks
Click to expand...
Click to collapse
[TUTORIAL] How to change the MODEL ID of the HTC One including video link

biopl said:
hello there
I have unlocked ATT htc one (PN0712000) and i wanted to change my MID to international (PN0710000). I have super CID/S-OFF and im running custom ROM. i read alot but i didnt get what exactly to do. any suggestions.. thanks
Click to expand...
Click to collapse
Use this tool if you don't wanna mess with hboot: http://forum.xda-developers.com/showthread.php?t=2535365
Sent from my HTC One using Tapatalk

nkk71 said:
Use this tool if you don't wanna mess with hboot: http://forum.xda-developers.com/showthread.php?t=2535365
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
What's the difference between this and the other one above ?
Sent from my HTC One using XDA Premium 4 mobile app

biopl said:
What's the difference between this and the other one above ?
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
The end result is the same, but in the TUTORIAL it's a lengthy process, and you'll have to flash an ENG hboot, which can be risky if you don't follow the steps exactly to the letter.
The tool is a flashable file (from within custom recovery), just like any custom ROM, and it has the Aroma Installer which lets you select which MID you want. Using the tool you should be done in less than a minute, whereas following the tutorial is going to take a lot longer.
My recommendation is using the tool: nice, simple, and easy, and no data loss.
Aroma sometimes gets stuck (not only with this tool, but in general), not a big deal!!, but I've had no problems, when i first wipe cache and dalvik in custom recovery, before running the tool. (or other tools)

nkk71 said:
The end result is the same, but in the TUTORIAL it's a lengthy process, and you'll have to flash an ENG hboot, which can be risky if you don't follow the steps exactly to the letter.
The tool is a flashable file (from within custom recovery), just like any custom ROM, and it has the Aroma Installer which lets you select which MID you want. Using the tool you should be done in less than a minute, whereas following the tutorial is going to take a lot longer.
My recommendation is using the tool: nice, simple, and easy, and no data loss.
Aroma sometimes gets stuck (not only with this tool, but in general), not a big deal!!, but I've had no problems, when i first wipe cache and dalvik in custom recovery, before running the tool. (or other tools)
Click to expand...
Click to collapse
thanks for clearing my doubts, i used to tool and everything went perfect.. i was wonderingn now that i have supercid, can i flash any RUU.exe ?

biopl said:
thanks for clearing my doubts, i used to tool and everything went perfect.. i was wonderingn now that i have supercid, can i flash any RUU.exe ?
Click to expand...
Click to collapse
yep, should be good to go.
and remember to stay s-off!!!

nkk71 said:
yep, should be good to go.
and remember to stay s-off!!!
Click to expand...
Click to collapse
sorry for silly question,, will this remove s-off and how to stay s-off ?

biopl said:
sorry for silly question,, will this remove s-off and how to stay s-off ?
Click to expand...
Click to collapse
No it won't remove s-off. The only way that can be done is if YOU DO IT MANUALLY, with fastboot oem writesecureflag 3.
Sent from my HTC One using Tapatalk

nkk71 said:
No it won't remove s-off. The only way that can be done is if YOU DO IT MANUALLY, with fastboot oem writesecureflag 3.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
im planning to flash RUU.exe and what should i do to stay safe and can u recommend me any RUU.

biopl said:
im planning to flash RUU.exe and what should i do to stay safe and can u recommend me any RUU.
Click to expand...
Click to collapse
so if I understand correctly, you just want a stock international HTC? (wonder why people don't like custom roms )
anyway, to get just international WWE edition, you have already have changed your MID to PN0710000, so now:
1- change CID: fastboot oem writecid HTC__001 (two underscores)
2- use the following RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
since you're s-off, you can stay UNLOCKED for RUU, and definitely stay S-Off
after running the RUU you should start getting updates immediately all the way up to 3.62 (Android 4.3); 4.4 isnt out yet for WWE.
EDIT: just noticed you're in Dubai, so maybe better to change CID to HTC__J15 (WWE GCC), so fastboot oem writecid HTC__J15
EDIT2: running the RUU will wipe EVERYTHING off your phone including pictures, music etc.
Hit the thanks button if i helped

Thanks for the reply, if I change my CID to HTC__J15, will I still be able to flash the above RUU, and will I have touch problem since I'm running latest firmwarm/Hboot, again thanks for your help made things easier
Sent from my HTC One using XDA Premium 4 mobile app

nkk71 said:
so if I understand correctly, you just want a stock international HTC? (wonder why people don't like custom roms )
anyway, to get just international WWE edition, you have already have changed your MID to PN0710000, so now:
1- change CID: fastboot oem writecid HTC__001 (two underscores)
2- use the following RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
since you're s-off, you can stay UNLOCKED for RUU, and definitely stay S-Off
after running the RUU you should start getting updates immediately all the way up to 3.62 (Android 4.3); 4.4 isnt out yet for WWE.
EDIT: just noticed you're in Dubai, so maybe better to change CID to HTC__J15 (WWE GCC), so fastboot oem writecid HTC__J15
EDIT2: running the RUU will wipe EVERYTHING off your phone including pictures, music etc.
Hit the thanks button if i helped
Click to expand...
Click to collapse
Thanks for the reply, if I change my CID to HTC__J15, will I still be able to flash the above RUU, and will I have touch problem since I'm running latest firmwarm/Hboot, again thanks for your help made things easier

biopl said:
Thanks for the reply, if I change my CID to HTC__J15, will I still be able to flash the above RUU, and will I have touch problem since I'm running latest firmwarm/Hboot, again thanks for your help made things easier
Click to expand...
Click to collapse
1- touchscreen: no problem, because a full ruu will downgrade everything
2- the RUU is made for
Code:
modelid: [B]PN0710000[/B]
cid: HTC__001, HTC__E11, HTC__102, HTC__203, HTC__405, HTC__Y13, HTC__304, HTC__032, HTC__A07, HTC__J15, HTC__016
there are minor differences in the CIDs, for example, setting HTC__001 doesn't give you Eastern European country/languages, but HTC__032 does:
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Nor

nkk71 said:
1- touchscreen: no problem, because a full ruu will downgrade everything
2- the RUU is made for
Code:
modelid: [B]PN0710000[/B]
cid: HTC__001, HTC__E11, HTC__102, HTC__203, HTC__405, HTC__Y13, HTC__304, HTC__032, HTC__A07, HTC__J15, HTC__016
there are minor differences in the CIDs, for example, setting HTC__001 doesn't give you Eastern European country/languages, but HTC__032 does:
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Nor
Click to expand...
Click to collapse
so lets say after i flash RUU and update to 4.3, will i need to root again if i wanted to install custom roms/firmwares ?

nkk71 said:
so if I understand correctly, you just want a stock international HTC? (wonder why people don't like custom roms )
anyway, to get just international WWE edition, you have already have changed your MID to PN0710000, so now:
1- change CID: fastboot oem writecid HTC__001 (two underscores)
2- use the following RUU: http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
since you're s-off, you can stay UNLOCKED for RUU, and definitely stay S-Off
after running the RUU you should start getting updates immediately all the way up to 3.62 (Android 4.3); 4.4 isnt out yet for WWE.
EDIT: just noticed you're in Dubai, so maybe better to change CID to HTC__J15 (WWE GCC), so fastboot oem writecid HTC__J15
EDIT2: running the RUU will wipe EVERYTHING off your phone including pictures, music etc.
Hit the thanks button if i helped
Click to expand...
Click to collapse
I tried and got ERROR [150]
Sent from my HTC One using XDA Premium 4 mobile app

ERROR 155*
Sent from my HTC One using XDA Premium 4 mobile app

biopl said:
ERROR 155*
Sent from my HTC One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
hboot 1.55? you have to downgrade to 1.44 separately first:
so download this: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
in bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <---- just in case the above said “failed flush again”
fastboot reboot-bootloader
--> and confirm hboot is now 1.44
then run ruu.exe

nkk71 said:
hboot 1.55? you have to downgrade to 1.44 separately first:
so download this: http://www.htc1guru.com/dld/1-29-401-12_hboot_1-44-zip/
in bootloader/FASTBOOT USB, flash it:
fastboot oem rebootRUU
fastboot flash zip 1.29.401.12_hboot_1.44.zip
fastboot flash zip 1.29.401.12_hboot_1.44.zip <---- just in case the above said “failed flush again”
fastboot reboot-bootloader
--> and confirm hboot is now 1.44
then run ruu.exe
Click to expand...
Click to collapse
I think for Error 155, i need to re-lock my bootloader then flash RUU

biopl said:
I think for Error 155, i need to re-lock my bootloader then flash RUU
Click to expand...
Click to collapse
not if you are s-off

Wanting to convert my Telus HTC one (m7_ul) to a GPE

Hello friends, I have an S-OFF HTC One that I am finally considering converting to full GPE Edition. I was on Bigxie's 4.4 rom (http://forum.xda-developers.com/showthread.php?t=2341395) I was wondering what is the safest way to do this (if there's a thread on these forums I would GREATLY appreciate being linked) and I also have a few questions.
1) I understand that ALL my data will be erased. What is the best way to backup my data?
2) I have changed my CID to superCID but I was wondering if the conversion would work for my Canadian Telus HTC One (m7_ul) It picks up HSPA
(http://mobility.telus.com/en/AB/htc_one/index.shtml) <- link with all the details about my phone
3) *This one's a big one for me* Can I convert my phone to a GPE edition whilst having a custom recovery?

The short and sweet of it is:
1. S-OFF
2. Change CID (needed) & MID (if needed)
3. Flash 4.4 GPE conversion RUU file from http://forum.xda-developers.com/showthread.php?t=2358781
You should either copy off your data locally or sync with google.
Custom recovery will be over written when you run the zip file in step 3. You can re-flash it after the process, but why would you want to?

SaHiLzZ said:
The short and sweet of it is:
1. S-OFF
2. Change CID (needed) & MID (if needed)
3. Flash 4.4 GPE conversion RUU file from http://forum.xda-developers.com/showthread.php?t=2358781
You should either copy off your data locally or sync with google.
Custom recovery will be over written when you run the zip file in step 3. You can re-flash it after the process, but why would you want to?
Click to expand...
Click to collapse
Will I be able to get OTA? That's pretty much my whole reason as to why I am doing this.
Also, will I still be able to root my phone with superSU?

SineandCosine said:
Will I be able to get OTA? That's pretty much my whole reason as to why I am doing this.
Click to expand...
Click to collapse
With correct GPE CID and MID you will be good to receive ota. You will not receive OTA if you keep super cid.
reboot your phone in fastboot usb
Code:
fastboot getvar all
Check your MID is PN0712000 and your CID is GOOGL01 (probably not bcause super cid) TELUS normally have CID PN0712000 so you should be fine.
If you need to change CID:
Code:
fastboot oem writecid GOOGL01
fastboot reboot-bootloader
confirm correct cid change:
Code:
fastboot oem readcid
then run the GPE 4.4 ruu.exe (can be found here: http://www.htcdev.com/devcenter/downloads)

Council ngtThe
alray said:
With correct GPE CID and MID you will be good to receive ota. You will not receive OTA if you keep super cid.
reboot your phone in fastboot usb
Code:
fastboot getvar all
Check your MID is PN0712000 and your CID is GOOGL01 (probably not bcause super cid) TELUS normally have CID PN0712000 so you should be fine.
If you need to change CID:
Code:
fastboot oem writecid GOOGL01
fastboot reboot-bootloader
confirm correct cid change:
Code:
fastboot oem readcid
then run the GPE 4.4 ruu.exe (can be found here: http://www.htcdev.com/devcenter/downloads)
Click to expand...
Click to collapse
One final question, I flashed the RUU and everything went well. However, I noticed that I still had Root access. I used the pre-rooted RUU zip http://forum.xda-developers.com/showthread.php?t=2358781&nocache=1 Can I get the OTA update to 4.4.2 without messing up my phone? Do I have to remove root?

Might as well flash the non-rooted RUU..

SaHiLzZ said:
Might as well flash the non-rooted RUU..
Click to expand...
Click to collapse
Alright, thank you. Honestly, most of my issues came from me being nervous of ruining my phone, but I am now on GPE and I can't thank you guys enough.

Awesome, jsut don't S-ON..

SaHiLzZ said:
Awesome, jsut don't S-ON..
Click to expand...
Click to collapse
I really have no intention to. However, I have noticed that Android System is taking 70% of my battery. Is this a normal thing? If it isn't, how can I reduce this number?

[Q] Change Firmware on Australian 64GB to EU?

Hi there,
I´m from Europe and bought an HTC One in Australia (64GB).
I tried to change the Firmware to the EU-Version but it doesn´t fully work.
What I´ve done:
Unlocked via HTC DEV
Installed TWRP
Rooted via TWRP
Installed Stock EU 4.19.401.11 from androidrevolution.org via TWRP
It works so far but I can´t change to any other languages than English (Australian, New Zealand, US) and three asian languages.
What did I do wrong? Or do I need some other firmware?
Thanks, for your help!

HodnZack said:
Hi there,
I´m from Europe and bought an HTC One in Australia (64GB).
I tried to change the Firmware to the EU-Version but it doesn´t fully work.
What I´ve done:
Unlocked via HTC DEV
Installed TWRP
Rooted via TWRP
Installed Stock EU 4.19.401.11 from androidrevolution.org via TWRP
It works so far but I can´t change to any other languages than English (Australian, New Zealand, US) and three asian languages.
What did I do wrong? Or do I need some other firmware?
Thanks, for your help!
Click to expand...
Click to collapse
1- changing firmware you need to be S-Off
2- but it won't affect the languages, that's CID dependent which can only be changed if you're S-Off
but you have easier alternatives:
1- use a Play Store app called More Locale
2- edit the xml files in /system/customize/CID
3- or in my opinion the best, just install ARHD 53.0 (if you want 4.19.401.11 Android 4.4.2)

As far as my phone info is correct I already changed the firmware to 4.19.401.11 or do I misunderstand something?
Is there any way to fully change my firmware to the current EU-Version? With OTA and everything?

HodnZack said:
As far as my phone info is correct I already changed the firmware to 4.19.401.11 or do I misunderstand something?
Click to expand...
Click to collapse
the firmware shows in "fastboot getvar all", and what shows in Settings -> About is just the version the ROM is based on. installing a ROM doesn't change firmware.
HodnZack said:
Is there any way to fully change my firmware to the current EU-Version? With OTA and everything?
Click to expand...
Click to collapse
Yes it is possible, but only if you are S-Off.

nkk71 said:
the firmware shows in "fastboot getvar all", and what shows in Settings -> About is just the version the ROM is based on. installing a ROM doesn't change firmware.
Click to expand...
Click to collapse
Oh, okay. Thanks for the info :good:
nkk71 said:
Yes it is possible, but only if you are S-Off.
Click to expand...
Click to collapse
If I do so, what do I need to do further? Changing ModelId and CID and flash the Stock EU-RUU?

HodnZack said:
Oh, okay. Thanks for the info :good:
If I do so, what do I need to do further? Changing ModelId and CID and flash the Stock EU-RUU?
Click to expand...
Click to collapse
Yes exactly,
1- you change CID by using:
fastboot oem writecid HTC__001 <- two underscores, CID has to be exactly 8 chars
fastboot reboot-bootloader
2- you change MID by using this tool (in a custom recovery): http://forum.xda-developers.com/showthread.php?t=2535365
for a list of possible EU unbranded CIDs (which will affect the language/country available for selection)
Code:
HTC__001 --> HTC-WWE
HTC__016 --> VODA-Africa-South
HTC__032 --> HTC-EastEurope
HTC__102 --> HTC-GER
HTC__203 --> HTC-FRA
HTC__304 --> HTC-SPA
HTC__405 --> HTC-ITA
HTC__A07 --> HTC-Russia
HTC__E11 --> HTC-Dutch
HTC__J15 --> HTC-GCC
HTC__Y13 --> HTC-Nor
Once S-Off, do NOT go back S-On!!

Alright I´m gonna give this a try :fingers-crossed: Thanks!
Do you know where to get the current stock EU-RUU? I guess the stock one from androidrevolution I´ve downloaded isn´t as stock as I thought...

HodnZack said:
Alright I´m gonna give this a try :fingers-crossed: Thanks!
Do you know where to get the current stock EU-RUU? I guess the stock one from androidrevolution I´ve downloaded isn´t as stock as I thought...
Click to expand...
Click to collapse
yeah you should go for a full ruu, not just a ROM: http://www.htc1guru.com/downloads/ruu-file-downloads/
(but only do this once you've changed MID to PN0710000 and CID to your liking, as the RUU will overwrite everything (and also wipe your phone)
x.xx.401.x are international unbranded RUU, I would recommend the 1.28.401.7.
You should take a look at my guide (though intended mostly for warranty), most things will be the same for you: http://forum.xda-developers.com/showthread.php?t=2541082
just skip the S-On part!!! and also no need to LOCK bootloader if you're S-Off.

Thanks a lot! You´ve really helped me :good:

HodnZack said:
Thanks a lot! You´ve really helped me :good:
Click to expand...
Click to collapse
No problem
If something is unclear better to ask first, before doing something bad

Which CID gets the fastest OTA?

My CID is htc_001 and it sucks i allways get ota updates very slow compared to the other cids, so my question is to which cid should i change in order to get the fastest ota updates?
And another question, i flashed TWRP and rooted my phone, i still can get ota updates?
Again sorry for my noobish questions and my bad english.

You will need to be fully stock to get OTA's, recovery, no missing apps, stock rom etc.
and as for CID, well at a guess I would say super cid would get the updates first, however, recently ive heard its very dependant on your operator, country and whether you brought your phone or its on contract.
Im in the UK and on CID HTC__001 too, I read today that HTC are releasing the sense 6 update to UK customers somewhere around the 11th June, so Wednesday. im all ready for it, just got to flash stock recovery.

Seanie280672 said:
You will need to be fully stock to get OTA's, recovery, no missing apps, stock rom etc.
and as for CID, well at a guess I would say super cid would get the updates first, however, recently ive heard its very dependant on your operator, country and whether you brought your phone or its on contract.
Im in the UK and on CID HTC__001 too, I read today that HTC are releasing the sense 6 update to UK customers somewhere around the 11th June, so Wednesday. im all ready for it, just got to flash stock recovery.
Click to expand...
Click to collapse
So all i need to do to get updateds is to flash stock recovery? (i can keep the root, right?)
How can i flash the stock recovery?

Num_Lock said:
So all i need to do to get updateds is to flash stock recovery? (i can keep the root, right?)
How can i flash the stock recovery?
Click to expand...
Click to collapse
Code:
fastboot flash recovery recovery.img

alray said:
Code:
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
Ok... do I need a file or something? can you explain more detailed?
I'm sorry for being noob it's just I'm used to samsung phones development and the htc development is different with new stuff (s off unlocking ruu and whatever) so i need you to explain me more detailed.
Thank you.

Num_Lock said:
Ok... I need a file or something? can you explain in more details?
I'm sorry for being noob it's just I'm reguler to samsung phones development and the htc development is different with new stuff (s off unlocking ruu and whatever) so i need you to explain me more detailed.
Thank you.
Click to expand...
Click to collapse
you need the stock recovery file (recovery.img) from the same version firmware of your phone. i.e if you phone is on 4.19.401.1 and you want to update to 5.20.401.1, you need the recovery.img file from the 4.19.401.1 firmware.
also read this: http://forum.xda-developers.com/showpost.php?p=52894276&postcount=9

alray said:
you need the stock recovery file (recovery.img) from the same version firmware of your phone. i.e if you phone is on 4.19.401.1 and you want to update to 5.20.401.1, you need the recovery.img file from the 4.19.401.1 firmware.
also read this: http://forum.xda-developers.com/showpost.php?p=52894276&postcount=9
Click to expand...
Click to collapse
OK and one more thing, i need to s off to change my cid?

Num_Lock said:
OK and one more thing, i need to s off to change my cid?
Click to expand...
Click to collapse
yes you need s-off, and if you change your cid, it must match your sw version! some software version only have a unique compatible cid and other have many compatible cid. i.e .401 sw version can use many different cid: HTC__001, HTC__Y13, HTC__032, HTC__203 etc etc..... but .502 version can only use one cid: CWS__001
to change cid:
Code:
fastboot oem writecid YOUR_CID [COLOR="Green"]<---- in most cases, start with HTC in capital letter, 2 underscores and 3 digits, always 8 characters total.[/COLOR]
i.e:
Code:
fastboot oem writecid HTC__001
you can read your actual cid with this command:
Code:
fastboot oem readcid

alray said:
yes you need s-off, and if you change your cid, it must match your sw version! some software version only have a unique compatible cid and other have many compatible cid. i.e .401 sw version can use many different cid: HTC__001, HTC__Y13, HTC__032, HTC__203 etc etc..... but .502 version can only use one cid: CWS__001
to change cid:
Code:
fastboot oem writecid YOUR_CID [COLOR="Green"]<---- in most cases, start with HTC in capital letter, 2 underscores and 3 digits, always 8 characters total.[/COLOR]
i.e:
Code:
fastboot oem writecid HTC__001
you can read your actual cid with this command:
Code:
fastboot oem readcid
Click to expand...
Click to collapse
I want to change to supercid, it supports my version? and with s off i can still get ota right?

Num_Lock said:
I want to change to supercid, it supports my version? and with s off i can still get ota right?
Click to expand...
Click to collapse
on some sw version, you will not receive ota update with supercid. supercid is used to bypass cid check when installing some rom/ruu.
for s-off question, read the link i have posted at post #6

alray said:
on some sw version, you will not receive ota update with supercid. supercid is used to bypass cid check when installing some rom/ruu.
for s-off question, read the link i have posted at post #6
Click to expand...
Click to collapse
In my version i will get ota updates with supercid?
Thanks for your help i really appreciate it.

Num_Lock said:
In my version i will get ota updates with supercid?
Thanks for your help i really appreciate it.
Click to expand...
Click to collapse
idk, refer to the android-info.txt of the ota.zip and you'll see all supported cid.

USA developers edition get ota first every time
from HTC One