Hi fih fb0 users. i tried porting the Paranoid Android 2.53 from Motorola Triumph ( http://androidforums.com/triumph-al...ranoid-android-ver2-53-alpha-1-01may2013.html ) by using this guide ( http://forum.xda-developers.com/showthread.php?t=2232773 )
Rom is booting but stuck in boot loop. i can see PA beans boot animation.
i have got logcat (attached)
I request our developers to have a look at the log and help me in getting the working PA.
Just want to see PA JB in fih fb0 before it dies.
Thank you.
reversegear said:
Hi fih fb0 users. i tried porting the Paranoid Android 2.53 from Motorola Triumph ( http://androidforums.com/triumph-al...ranoid-android-ver2-53-alpha-1-01may2013.html ) by using this guide ( http://forum.xda-developers.com/showthread.php?t=2232773 )
Rom is booting but stuck in boot loop. i can see PA beans boot animation.
i have got logcat (attached)
I request our developers to have a look at the log and help me in getting the working PA.
Just want to see PA JB in fih fb0 before it dies.
Thank you.
Click to expand...
Click to collapse
I will also try using same method
Have you changed LIBANDROID.RUNTIME.SO
2. if you remember elol shared with us a cm9 folder for porting
you can also try making same folder by replacing files from CM10 rom into that file.
I think Gundul and Lanhoter can help us also
Tanuj Chhibber said:
I will also try using same method
Have you changed LIBANDROID.RUNTIME.SO
2. if you remember elol shared with us a cm9 folder for porting
you can also try making same folder by replacing files from CM10 rom into that file.
I think Gundul and Lanhoter can help us also
Click to expand...
Click to collapse
finally got one reply after 80+ views
the above logcat is after replacing the runtime.so file
i googled about the errors and found out the problem is with framework.jar but not sure.
reversegear said:
finally got one reply after 80+ views
the above logcat is after replacing the runtime.so file
i googled about the errors and found out the problem is with framework.jar but not sure.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1923298
Try this also
or do one thing
Just change BOOT.IMG from PA Rom from MT DEv from any kernel. It will boot definately( I tried and got sucess) but there will be a pointer as faced in gundul CM9 roms. Only he can help to remove that pointer
Tanuj Chhibber said:
Just change BOOT.IMG from PA Rom from MT DEv from any kernel.
Click to expand...
Click to collapse
what exactly is this. i did not understood.
Thanks for the feedback
reversegear said:
what exactly is this. i did not understood.
Thanks for the feedback
Click to expand...
Click to collapse
Open any kernel zip file and replace boot image into PA Rom from triumph
dont change anything else
it will boot to home screen but with pointer on screen
Tanuj Chhibber said:
Open any kernel zip file and replace boot image into PA Rom from triumph
dont change anything else
it will boot to home screen but with pointer on screen
Click to expand...
Click to collapse
Almost got it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Still long way to go. Getting reboots
Attached the logcat I hope the experts will have a look at it.
I'll keep you updated. Thank you @Tanuj Chhibber.
Sent from my FIH-FB0 using Tapatalk 4
Its great to see one more porter getting ready to contribute this community... best luck
its miui emopowered machine on xda...
vivekb said:
Its great to see one more porter getting ready to contribute this community... best luck
its miui emopowered machine on xda...
Click to expand...
Click to collapse
Just learning and wanted to contribute something from my end for this great forum.
Status Update.
Tanuj Chhibber said:
it will boot to home screen but with pointer on screen
Click to expand...
Click to collapse
POINTER Problem is solved. working on Network issue. hope i can hit the target.
Network is not a big deal
Use Aben's Guide
What about reboots?
If this way is successful, you can also port PAC rom
something is turning out as expected.
Tanuj Chhibber said:
Network is not a big deal
Use Aben's Guide
What about reboots?
If this way is successful, you can also port PAC rom
Click to expand...
Click to collapse
thanks for your support @Tanuj Chhibber
Good news friends. after 69 flashes and n number of logcats. finally got the ROM which will not reboot on its own . Hold on
Still have problem with
Network (could able to get GSM settings but not showing the network)
Wifi ( Tried everything i could but not able to get it ) concentrated more on this
GPS (GPS Settings force close but this could not be a issue)
PASettings ( every thing works but after second reboot the UI settings will become default )
Camera ( could able to take pictures but screen is black )
Graphichs ( graphic glitches can be seen like in earlier ICS days. replaced the latest egl libs but no display )
Still hard way to go. but sure we are in the correct direction to get the PA.
reversegear said:
thanks for your support @Tanuj Chhibber
Good news friends. after 69 flashes and n number of logcats. finally got the ROM which will not reboot on its own . Hold on
Still have problem with
Network (could able to get GSM settings but not showing the network)
Wifi ( Tried everything i could but not able to get it ) concentrated more on this
GPS (GPS Settings force close but this could not be a issue)
PASettings ( every thing works but after second reboot the UI settings will become default )
Camera ( could able to take pictures but screen is black )
Graphichs ( graphic glitches can be seen like in earlier ICS days. replaced the latest egl libs but no display )
Still hard way to go. but sure we are in the correct direction to get the PA.
Click to expand...
Click to collapse
Great Man
You gonna rock it
For WIFI plz check 2nd last page of Gundul's MIUI 2.4.13 GB rom.
Will update you if any point comes in mind
Have you tried full guide of porting triumph rom by Aben
Or you can PM CK for any help
Compare Build.prop for ICS and JB. try to use max build.prop from ICS PA rom
For camera, try to replaceall camera libs from Lanhoter rom
yes i followed abens guide but not getting the network to work.
Wifi ill check out gundul's thread
Thaaanks for pointing.
i think camera will not be a big issue.
reversegear said:
yes i followed abens guide but not getting the network to work.
Wifi ill check out gundul's thread
Thaaanks for pointing.
i think camera will not be a big issue.
Click to expand...
Click to collapse
If you got rid of reboot issue. Upload it in dev section with all the pros and Cons, we will try to update it or other can also have a look at it bcoz i think this thread is not getting visibilty here
Tanuj Chhibber said:
If you got rid of reboot issue. Upload it in dev section with all the pros and Cons, we will try to update it or other can also have a look at it bcoz i think this thread is not getting visibilty here
Click to expand...
Click to collapse
yes i was thinking about it. (Few hands are better than single :victory
ill upload asap.
If anyone wants to mess with the partially working rom and improve it pm me.
ill post it in public when at least basic things works.
in the mean time while surfing web found out this video
https://www.youtube.com/watch?feature=player_embedded&v=VQdXHuB712c
anyone can tell what was the rom used in the video before flashing. Cool notification drawer.
Sorry forgot to tell you guys who downloaded.
The rom boots up in second reboot
first boot takes some time around 5mins.
reversegear said:
If anyone wants to mess with the partially working rom and improve it pm me.
ill post it in public when at least basic things works.
in the mean time while surfing web found out this video
https://www.youtube.com/watch?feature=player_embedded&v=VQdXHuB712c
anyone can tell what was the rom used in the video before flashing. Cool notification drawer.
Click to expand...
Click to collapse
It is CYANMOBILE.
You can also try to update that rom.
Can you give me the link.
ill give it a try.
reversegear said:
Can you give me the link.
ill give it a try.
Click to expand...
Click to collapse
Here is the Link
Dude it was given by you
http://forum.xda-developers.com/showthread.php?t=2123477.
For wifi on PA rom
Use CK CM10.5B Kernel
It is working
Related
BETA TESTERS NEEDED... PM ME PLEASE I WANT CONTINUE WITH THE PORT BUT I HAVE NOT THE DEVICE... THE ONLY REQUERIMENTS ARE KNOW USE LOGCAT AND USE LINUX (please no "i dont know how to use it but if you help me i can do it" ¬¬)
So sorry guys... no more miui from me... i've not O1 now...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
INTRODUCING MIUI UNOFFICIAL PORT FOR OPTIMUS ONE
What Work's
4Ways Reboot
Built-in SuperUser app
Offline Charging
USB and Bluetooth Tethering
MIC
USB MOUNT and ABD
Full Camera (no panorama)
Deep Sleep
Full H/W Acceleration
Bluetooth
3D
Sensors
Audio
GPS
Full Touchscreen
Wi-Fi
Google Sync
Market
Gmail
Browser
MIUI Apps
Gallery
RIL (Data, Call, SMS)
What Does'nt Work / Issues
Browser Crash when you touch it!
Sometimes when you reboot the phone it stuck in charging animation... you need to reboot in recovery manually and reboot system from there
Credits
haLa team (or alha or laha or ahla or ahal.... You understand right?) For the hard work on our phone
CMTEAM (for cm9)
MIUIAndroid (for MIUI and Miui Rom to port)
Lupohirp (for all the work that he do for our lovely phone)
hephappy (the same and the base rom to port
Fundozzz for inspire me to make it
sweetbinodray inspire me too
MingYueHaoKong Guide me hot to fix deep sleep
so atention guys...
im uploading 2 files
MIUI_2_6_1_P500.zip
GAPPS&DEEPSLEEP.zip
you need to flash ther rom and after the firts boot, reboot in recovery and flash the hotfix ok?
Click to expand...
Click to collapse
Sorry for the red color but it is important
Bug-Report Guidelines from MIUIau
Bug-Reporting Guidelines
Consider the following “Big Five” statements:
I have been able to Reproduce this bug.
I have attempted a Full Wipe and Re-Flash.
I have checked and can confirm that this bug has not already been reported.
I have read the ENTIRE post and followed it’s instructions TO-THE-’T‘ (and still experience this bug....and IT IS NOT A NOTED BUG IN THE OP!!!!!!!!).
I have NOT restored anything from a GingerBread Backup.
DO NOT post a bug-report if any of them are FALSE.
Click to expand...
Click to collapse
When posting a bug-report, format is at follows:
1. (One sentence description of bug).
2. Affirm that the “Big Five” statements are true.
3. Instructions for reproducing the bug.
4. a LOGCAT output for the FATAL EXCEPTION (if the bug is an app crash or reboot), or ‘df’ output (if the bug relates to low free storage space). To get the output, run “adb logcat > pathtotextfile” or “adb shell df > pathtotextfile” as appropriate.
5. Any other useful information.
Bug reports which do not follow the above procedure do not help me or the Incredible 2 community at all! (ok I changed that a bit)
6. Please see a sample bug report (not real)
Issue: Music force closes when skipping tracks
Wiped data and reflashed: yes
Can be reproduced: yes
Logcat: (dropbox or whatever link to .txt file containing logcat) [please verify that in the logcat the actual error/force close is contained]
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Click to expand...
Click to collapse
2º Post: ChangeLog
3º Post: Downloads
4º Post: FAQ
Changelog
2.6.5
Based on Nexus S MIUI 2.6.1
Based on CM9 ChargeMe
Fixed Camera crash with Macro Focus
Fixed Built-in Superuser app
New Network Assistan app from MIUI
so much more thing that i dont remember... test it
OLD VERSIONS
First Upload
Based on Nexus S MIUI 2.5.4
Based on CM9 Prerelease5
Click to expand...
Click to collapse
Screenshots
Downloads
Stable 1
MIUI_2_6_1_P500.zip Mirror
GAPPS&DEEPSLEEP.zip (Gapps + DeepSleep fix + Mic fix)(Mirror)
Click to expand...
Click to collapse
OLD VERSIONS
Beta1
miui_2_5_4_thunderg.zip
hotfix1.zip (for deep sleep fix)
hotfix2.zip (for usb fix {hotfix1 uncluded} )
hotfix3.zip (for mic and all the others
Click to expand...
Click to collapse
Click to expand...
Click to collapse
FAQ
1. Camera is not working? Why if is based in pre release 5?
A: its only a problem with macro focus... set infinity in camera options...
2. Themes don't work!
A: Of Course it works... only you need to create a folder in data/system/ called "theme" (REMEMBER... "theme", not Theme or themes or THEMES.... "theme") (in next version will be added a script for that themes works in first boot...
3. It is based in (insert your cm9 rom here), can i install it without a ful-wipe?
A: NOT, already tested by opera and boot but with a lot of crashes and FC...
another one?!?
so u have deep sleep!! u can help fundoozz with that. and colaborate with his work. why to make a different port. its the same as of fundoozz. ryt?
another
cimdrap said:
another one?!?
Click to expand...
Click to collapse
since fundozz and bino have exams they cant work on it right now
and this version is a later version too
so its all good
Ozadroid said:
so u have deep sleep!! u can help fundoozz with that. and colaborate with his work. why to make a different port. its the same as of fundoozz. ryt?
Click to expand...
Click to collapse
Yeah but I'm not part of the mac team, he knows how to fix data and Mic in calls.... I've deep sleep... a collaboration would be great but he's busy with exams and don't answer when I ask he for how fix data and Mic
is this one patchrom?,,
waitin for upload!
dnle71 said:
is this one patchrom?,,
Click to expand...
Click to collapse
No, binary port, patch ROM not work with mdpi devices
I uploaded a wrong version :/ so bad, now I'm at work and have not the port here... It will be uploaded at 22.00 GMT -4
Guys plzzz stop discouraging anyone who atleast tries to give something to the community..if OP is taking this project & thinks to complete it then wats wrong???I know well that Fundooz will definitely help DHK to fix bugs which he can..So talk +++
Jaani said:
Guys plzzz stop discouraging anyone who atleast tries to give something to the community..if OP is taking this project & thinks to complete it then wats wrong???I know well that Fundooz will definitely help DHK to fix bugs which he can..So talk +++
Click to expand...
Click to collapse
Nobody is discouraging OP bro. its just it is better to be a team rather than an individual.
---------- Post added at 01:20 AM ---------- Previous post was at 01:16 AM ----------
dhk.- said:
Yeah but I'm not part of the mac team, he knows how to fix data and Mic in calls.... I've deep sleep... a collaboration would be great but he's busy with exams and don't answer when I ask he for how fix data and Mic
Click to expand...
Click to collapse
hmm he is away for his xams. u can ask arjen for getting in MAC. i hope they dont have any rules about that!
dhk.- said:
Yeah but I'm not part of the mac team, he knows how to fix data and Mic in calls.... I've deep sleep... a collaboration would be great but he's busy with exams and don't answer when I ask he for how fix data and Mic
Click to expand...
Click to collapse
You should ask to join team Mac I Dont see anyway they can reject you
Sent from my LG-P500 using xda premium
opera38205 said:
You should ask to join team Mac I Dont see anyway they can reject you
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Sure, but first I'll upload the ROM... It's my presentation card....
congratulations ... Chileans finally do something productive xD
---------- Post added at 04:47 PM ---------- Previous post was at 04:44 PM ----------
dhk.- said:
Sure, but first I'll upload the ROM... It's my presentation card....
Click to expand...
Click to collapse
MIUI finally revived in P500, months no updates
JeduRocks said:
congratulations ... Chileans finally do something productive xD
---------- Post added at 04:47 PM ---------- Previous post was at 04:44 PM ----------
MIUI finally revived in P500, months no updates
Click to expand...
Click to collapse
yeah xd I never saw a Chilean making something in this forum....
DATA FIXED!!!!! only left mic and camera and could be my daily an of course your daily rom
dhk.- said:
DATA FIXED!!!!! only left mic and camera and could be my daily an of course your daily rom
Click to expand...
Click to collapse
when u upload?
first, thanks ardX to make kernel can boot jellybean
this's the latest cm10 unofficial 20120813 for test only
you can flash by use normal treat of 2.6.35 kernel
download : hxxp://d-h.st/OvH
still issues :
- ril data
- video playback max.480p (fixed reboot)
- camera
- i don't know
hope dev/porter can solve this or may be wait for cm team release update
can't post on dev topic because i'm a newbie and sorry for my poor english
You are the same rcset who gives so many roms and updates?????
Sent from my A99 using xda premium
rcset said:
first, thanks ardX to make kernel can boot jellybean
this's the latest cm10 unofficial 20120813 for test only
you can flash by use normal treat of 2.6.35 kernel
download : hxxp://d-h.st/OvH
still issues :
- ril data
- video playback max.480p (fixed reboot)
- camera
- i don't know
hope dev/porter can solve this or may be wait for cm team release update
can't post on dev topic because i'm a newbie and sorry for my poor english
Click to expand...
Click to collapse
wow... to see you on XDA .... about posting post in general... mod will help us to move the thread in dev section ....
waiting to see you with updates... and english ... its good dude
Welcome
Welcome Bro....We Love your MIUI ICS Work...its one of the best ICS roms out there for our device.... and grt to see you here on XDA
Welcome rcset....
I have tested ardX's JB also with my 0.4d for JB....
Sent from my bike using Tapatalk 2
actually i alway visit xda forum and see everybody here
thank to all of you give me knowledge
We need you in dev selection , join our dev team ... Ck, aben ,Elol, aeio ,andx ,..... all.... as they are very helpful .....share your knowledge....work in team ... or.... but ........:
Upload best custom rom for our toy
Thanks for your roms ....
welcome to XDA ....:thumbup:
Sent from my A99 using xda premium
rcset said:
actually i alway visit xda forum and see everybody here
thank to all of you give me knowledge
Click to expand...
Click to collapse
thans mate even please join with we us,you are very good do some porting rom..right now i cant porting rom becuse my power button get broken,so wait for a few days...and want thinks i really wait for part file .so camera ics from tj-style..have any update for cam from tj-style?anyone know?how long time we need to wait?were tj-style prof of for FIH-FBO?even he still working on this phone or not?waiting for it...
Thanks you all
It's a free bump to Push the thread on top so that this doesn't get lost in all general threads, PM'ed to haree to move this thread to Dev section, he says he'll take action, let's see when he moves.
Thanks
Update
any update on this
Tanuj Chhibber said:
any update on this
Click to expand...
Click to collapse
Good day.
I'm afraid we cannot get a good update on our device's move towards Jelly Bean unless we can get a good Android-4.1-specific kernel either from our OEMs or from Foxconn.
CK's Jelly Bean Kernel
CacingKalung said:
Welcome rcset....
I have tested ardX's JB also with my 0.4d for JB....
Sent from my bike using Tapatalk 2
Click to expand...
Click to collapse
Good day Sir CK.
I am humbly requesting your Jelly Bean kernel be made available for download.
Thanks.
^_^
ril data and video playback are ready fixed
i don't sure for other devices
camera no good luck it's can connect driver but fc
may someone ask tj_style to help
fast and stable rom but not enough for daily use
for test : http://d-h.st/TMx
rcset said:
ril data and video playback are ready fixed
i don't sure for other devices
camera no good luck it's can connect driver but fc
may someone ask tj_style to help
fast and stable rom but not enough for daily use
for test : http://d-h.st/TMx
Click to expand...
Click to collapse
Thanks RCSET.....
downloading it....
EDIT:
Hi rcset .... flased CM10 ....and some thing want to mention
1. I got the mobile network but shown no signal in the status bar
2. I am not able to get data connectivity means internet Connection and also I tried to set APN but didn't got option.
3. Headset not able to connect but that is not a great issue, may because i have not used stocked headset ....
4. RAM is 100 + but not other application apart for loaded one
5. Volume Rocker option works really well .... happy with it
6. smooth interface ... very fluid
7. good music quality
8. camera not working as mentioned by RCSET... and not important for me too
if above 1 and 2 issues got solve i will make this as my daily used ROM...
I was create new thread for camera JB Fix,,hope TJ_Style have time to help us
http://forum.andro-id.net/fb0_system_modification/master_tjstyle_please_help_jb_camera_396.0.html
anyway,thanks RCset,,still testing your ROM now
vivekb said:
Thanks RCSET.....
downloading it....
EDIT:
Hi rcset .... flased CM10 ....and some thing want to mention
1. I got the mobile network but shown no signal in the status bar
2. I am not able to get data connectivity means internet Connection and also I tried to set APN but didn't got option.
3. Headset not able to connect but that is not a great issue, may because i have not used stocked headset ....
4. RAM is 100 + but not other application apart for loaded one
5. Volume Rocker option works really well .... happy with it
6. smooth interface ... very fluid
7. good music quality
8. camera not working as mentioned by RCSET... and not important for me too
if above 1 and 2 issues got solve i will make this as my daily used ROM...
Click to expand...
Click to collapse
Like Vivekb said,,has same issue
Game HD also doesnt work,,perhaps from incompatibility games ,,but all my games HD is original version,not leaked version
some screenshot from me
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ERROR
I am getting server error whenever i use play store. Cant download or access. Tried wiping cache and deleting data. Even reboot.
nachiketa.ramesh said:
I am getting server error whenever i use play store. Cant download or access. Tried wiping cache and deleting data. Even reboot.
Click to expand...
Click to collapse
just want to know if this rom can unmout usb or using sd card while using the device
elol said:
just want to know if this rom can unmout usb or using sd card while using the device
Click to expand...
Click to collapse
No it cant. But i have faced another problem. when usb debugging is on, it unmounts for no reason when accessing the computer.
---------- Post added at 07:48 PM ---------- Previous post was at 07:44 PM ----------
Hey elol, when are you uploading icecoldsandwitch 8.6.1?
nachiketa.ramesh said:
No it cant. But i have faced another problem. when usb debugging is on, it unmounts for no reason when accessing the computer.
---------- Post added at 07:48 PM ---------- Previous post was at 07:44 PM ----------
Hey elol, when are you uploading icecoldsandwitch 8.6.1?
Click to expand...
Click to collapse
i cant upload it because my connetion very-very low..only can upload 2kbps...sory frend..if i have time,i go cyber and upload my rom....
---------- Post added at 06:50 PM ---------- Previous post was at 06:13 PM ----------
nachiketa.ramesh said:
I am getting server error whenever i use play store. Cant download or access. Tried wiping cache and deleting data. Even reboot.
Click to expand...
Click to collapse
flash jelly bean gapps
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MIUI V4.1 (2.9.21) :highfive:
I honestly take no credit for this Rom at all although I would like to give a big shout out & Thanks to everyone at XDA, Cyangenmod, and MIUI Dev team.
I, nor ANYONE else is responsible for what MAY happen to you and your phone, or anyone else and their phone.
So by moving forward to downloading you understand the risks of flashing a new ROM, and understand it's NOT anyone
else's fault except yours. . . No one put a gun to your head and said hey download and flash this now!
Code:
Installation Instructions. . .
Reboot into Recovery
Do a Nandroid Backup (optional)
[U][SIZE="3"]-[B]Wipe data/factory reset[/B]
-[B]Wipe cache partition/dalvik cashed[/B]
-[B]Go into Mounts & Storage and Format /system[/B][/SIZE][/U]
-Install the ROM
-reboot (as always first boot takes a bit longer)
-let sit for a few minutes
-reboot
-set up as you like
-reboot and enjoy
The Rom comes with Devil3_1.2.1_JellyBean kernel, but of course flash what ever JellyBean kernel your heart desire.
Code:
Issues::
1. GPS May be shot, let me know and I'll attempt to fix
2. Low memory space in /Data? Use an app to put your apps in the /system/app folder or use to app2sd
3. BLN doesn't work properly. [FIX? Disable Screen on in sms settings]
4. EFS (IMEI ERROR EVERY BOOT) [FIX? Unknown at this time]
5. Play Store Error: (app name) could not be downloaded due to an error; error retrieving information from server [RPC:AEC:0]
5a. Fix? Remove Google account and re-login .
Download Link in 2nd post.
Click on the :good:Thanks button if you like.
MiUi 2.9.21 Vibrant Port
Code:
New Features
Dial tone when dialing numbers is now a Piano
Misuse protector (Proximity Sensor)
Few tweaks for better battery life, data speed/signal
New DPI set to 200
and Many more. . .
READ 'ISSUES/BUGS' LOCATED IN THE FIRST POST BEFORE POSTING.
:::::::::::::
:: Click Here to download Rom
:: Click here to download KA7 modem (KB5 Modem comes stock with Rom)
:::::::::::::
::Addons
FFC Mod: I don't recall implanting it, so when i release download link if anyone willing to try this mod from this link HERE, let me know if it works and also does it make the camera app un-theme-able .
~~~~~~~~~~~~~~~~~```2.9.4```~~~~~~~~~~~~~~~~~~~~
9/25/12 : Build update
:::::::::::
:: Added FFC Mod (Untested)
:: Added GPS lib/files (Untested)
:: Changed DPI to 192
:: & other minor updates
:::::::::::
:::::::::::
:: Download Link
:: Click Here to download Build #2
:::::::::::
Build #1 info:
Uploaded On: 2012-09-22 22:57:55
Downloaded: 62 times
Click to expand...
Click to collapse
Thanks
jrongi1, brad heffernan (Miui.us)
link is not working
khan_frd2002 said:
link is not working
Click to expand...
Click to collapse
Uploading Mirror now, for some reason Dev-host is down .
That's just awesome, that someone else is now working on MIUI for vibrant! But, how about normal DPI?
TNK2005 said:
That's just awesome, that someone else is now working on MIUI for vibrant! But, how about normal DPI?
Click to expand...
Click to collapse
Yeah, see what had happen was when i first started porting it it was just for personal use so i did everything more of to my liking but I'd be happy to change things up and add/remove things. It's two things you can do as of now dealing with the DPI.
One: Download Build.prop editor from Google play, and change the DPI to 240 yourself. build.prop Editor by Nathan Campos
Two: Wait for the next update which will come with more options
Thank you for this!
Since J is dropping the miui port, this will be surely just as good!
I'd be more than happy to test out your experimental builds as I have done for J.
Also link does not work but mirror does.
Sent from my SGH-T959 using Tapatalk 2
Is there any way to get TV output working with this
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
xriderx66 said:
Thank you for this!
Since J is dropping the miui port, this will be surely just as good!
I'd be more than happy to test out your experimental builds as I have done for J.
Also link does not work but mirror does.
Sent from my SGH-T959 using Tapatalk 2
Click to expand...
Click to collapse
Yeah, I actually have the newest build for you to test now.
And Yes, I am aware of that, Dev-Host 'WAS' down but is back up now.
chriswallen79 said:
Is there any way to get TV output working with this
Sent from my SAMSUNG-SGH-T989 using xda app-developers app
Click to expand...
Click to collapse
I am not positive if it'll work, It does have the options but I have no way for sure to test it.
so happy this came out about to flash in a little bit after i charge!
thanks alot
What dpi does this run at? It's a bit too big for me, I prefer default or 210 (gonna change it)
Also,
On that pic, what is that on the second pic?
xriderx66 said:
What dpi does this run at? It's a bit too big for me, I prefer default or 210 (gonna change it)
Also,
On that pic, what is that on the second pic?
Click to expand...
Click to collapse
My comfort level of DPI is "182" as you can see in the 2nd post screenshots.
that picture in the first post is from en.miui.com it self.
GeEazy said:
My comfort level of DPI is "182" as you can see in the 2nd post screenshots.
that picture in the first post is from en.miui.com it self.
Click to expand...
Click to collapse
Alright, I've officially moved onto this ROM, restoring my apps right now.
PM me with any test builds.
xriderx66 said:
Alright, I've officially moved onto this ROM, restoring my apps right now.
PM me with any test builds.
Click to expand...
Click to collapse
Alright, I'm currently trying to update to 2.9.21 once successful I plan on releasing on the 28th or before. I have a working port, but I'm having the very amusing CM9+ IMEI problem.
GeEazy said:
Alright, I'm currently trying to update to 2.9.21 once successful I plan on releasing on the 28th or before. I have a working port, but I'm having the very amusing CM9+ IMEI problem.
Click to expand...
Click to collapse
Not sure if you or Jrongi use different sources, but restoring my desktop layout gets me a FC every single time, and we all know how much of a pain it is to setup the homescreen.
Also, stuff like the "hidden proximity" feature seem to not be present (when your proximity is hidden, like if its in your pocket, it won't let you do anything until its unhidden)
xriderx66 said:
Not sure if you or Jrongi use different sources, but restoring my desktop layout gets me a FC every single time, and we all know how much of a pain it is to setup the homescreen.
Also, stuff like the "hidden proximity" feature seem to not be present (when your proximity is hidden, like if its in your pocket, it won't let you do anything until its unhidden)
Click to expand...
Click to collapse
Yeah, J did his own thing, & his was ICS. and I'm not to sure on the restoring desktop layout problem, I'll look into that as well as the "Hidden Proximity", I do know it works during calls tho.
GeEazy said:
Yeah, J did his own thing, & his was ICS. and I'm not to sure on the restoring desktop layout problem, I'll look into that as well as the "Hidden Proximity", I do know it works during calls tho.
Click to expand...
Click to collapse
Not the ICS one.
He has a JB one as well, but is most likely going to drop support for it.
http://forum.xda-developers.com/showthread.php?t=1552241
I'm guessing its because he uses miuiandroid, while you use miui.us
and I guess there are differences.
xriderx66 said:
Not the ICS one.
He has a JB one as well, but is most likely going to drop support for it.
http://forum.xda-developers.com/showthread.php?t=1552241
I'm guessing its because he uses miuiandroid, while you use miui.us
and I guess there are differences.
Click to expand...
Click to collapse
noooo, we used the same source on this current build, my next one is going to be miui.us unless i can get miuiandroid to work without bootloop, so you shouldn't be having a problem with 2.9.4 .
hows the battery on this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For
Motorola Atrix
What is King Kang?!?
King Kang is essentially a hybrid ROM - its a mixture of AOKP, CyanogenMod, and ParanoidAndroid, bringing all their customizations to one rock solid and quick ROM. These numerous features combine to create a blend of features not seen anywhere else before. Make the user interface yours with this ROM. Change the DPI the ROM runs at, tweak the interface to your hearts content, while enjoying great battery life and stability. Never before have these features combined to create a ROM as feature-packed as King Kang. Credits for the features goes directly to the teams responsible - AOKP and CM for their respective work, and ParanoidAndroid for their wonderful DPI on-the-fly modifications. Without these teams, this ROM would not be possible.
Click to expand...
Click to collapse
How To Flash
Place ROM onto phone storage
Reboot to recovery
Make a Nandroid
Install Rom: Wipe INSIDE ROM
When you select "Reboot Not", you'll get a CWM error, IGNORE IT
Install OPTIONS or Gapps
WIKI/FAQ Located: To be reworked
Click to expand...
Click to collapse
PLEASE NOTE: I will NOT provide ParanoidPreferences.apk in this ROM zip. The devs of that great ROM have asked that the particular apk NOT be included in NON-PA zips. They put in the work, so I respect their wishes. That being said, I will NOT link the file nor do I want to see it linked here.
To get it, do the following:
Boot into King Kang and set up Gapps
Download Paranoid Android ROM zip
Download Root Browser
Use Root Browser to extract the file from the PA zip
Place it into /system/app
Set permissions to RW, R, R
Reboot
Click to expand...
Click to collapse
To successfully set Tablet mode in King Kang, follow the following steps....
Go into settings
Go into ROM Control
Go into Navigation Bar and enable bar, allow SU
Go back and go into General UI
Click Force Tablet UI and reboot manually
Once you come back from the reboot, go into Settings
Go into Paranoid Settings
Go into Workspace
Click on what mode y
Click to expand...
Click to collapse
Bugs??:
KNOWN ISSUES:
Videocamera : Use VideoCam Illusion
Slight Lag possible on screen transitions
USB tether
The graphics related issues are due to not having proper drivers to use for this. Don't ask for an ETA on a fix. Moto won't be giving us the drivers, so there is no fix
If you need to report a NEW bug, report it once, and the next TWO people VERIFY it. I don't need everyone reporting same bug 20 times. I you can, provide me the following information:
Version you're using
What type of fwipe you did and what ROM you came from
Have you restored any data from something like Titanium Backup
What app is misbehaving and what you were doing when it started
Logcats<--THIS IS PREFERRED.
If you don't know how to logcat, go HERE and learn. This really nice guy took the time to write out a good how to
When you have a LOGCAT and would like to post it, please go to pastebin and post it in there, then LINK that location in this thread...I don't want to see them posted directly in here.
Click to expand...
Click to collapse
Downloads:
ROM file is Located HERE
Options Chooser is Located HERE
My latest CWM: V1 as well as Aroma-Prep
can be downloaded HERE
Click to expand...
Click to collapse
Credits:
AOKP, Paranoid Android, Cyanogenmod, and King Kang Teams-Without all of them, this ROM doesn't exist
scott.hart.bi=for helping me with source building
Jokersax11-for being my initial inspiration on Atrix, being a cool guy, and helping me along in my early days
Amarullz=for creating the Aroma Installer
Spleef-for collaborating on those first builds that got me into Android
Alcapone263-for donating an Atrix coming to a home near me
All my testers and users
Anyone else I may have forgotten
Click to expand...
Click to collapse
Kernel Source: HERE
Click to expand...
Click to collapse
Mine
Mine 2
Th3Bill said:
Mine 2
Click to expand...
Click to collapse
Mine 3
Bill just wanted to thank you, like everyone else that will be flooding this thread. Thanks for sticking around and continuing such great development!
jeffreygtab said:
Mine 3
Bill just wanted to thank you, like everyone else that will be flooding this thread. Thanks for sticking around and continuing such great development!
Click to expand...
Click to collapse
Way I look at it, these 2 devices (Photon and Atrix) were the ones I started with, so as long as we can make viable roms on it, I'm going to
Pretty Slick so far. Will run for a couple days. Thanks th3bill
Sounds AWESOME
Just waiting for some screens to give it a chance ;3
Sounds awesome; where will I find the corresponding gapps?
Regards
redThd said:
Sounds awesome; where will I find the corresponding gapps?
Regards
Click to expand...
Click to collapse
Can either use Options overflash or the Gapps by EPinter. There are also some by Justinbean that are pretty good too
I'm getting 'set_perm:some changes failed' at the end of the installation process :crying::crying::crying::crying:
I'm getting the same fault on liquid as well so I think I have put the saved logs here?
Hardware acceleration is not worikng, wright??
barry_ said:
I'm getting 'set_perm:some changes failed' at the end of the installation process :crying::crying::crying::crying:
I'm getting the same fault on liquid as well so I think I have put the saved logs here?
Click to expand...
Click to collapse
Ill fix tonight
Sent from my LG Optimus G
WiFi not turning on at all for me no matter what configuration chosen during installation and with all possible wipe combinations Pressing WiFi does nothing.
Newest AOKP does not have this issue, running it now.
I installed it over latest cm10 from the bill. Just wiped cache and dalvik. The Rom is running fast and smooth without any issues, every thing is ok including WiFi.
Sent from my MB855 using xda app-developers app
Must be me then....
I think he is saying try AOKP then flash this rom. It's worth a try.
Sent using my Jelly fingers.
I never use WiFi much so I didn't notice. Its borked as stated above.
Other than that nice ROM.
I can confirm, also, that WiFi does not turn on with this ROM. Th3Bill did post in the Liquid Smooth thread that he would be posting a fix for this very soon.
Thanks Th3Bill!!
Thanks for the ROM, nothing to report other than a thanks.
redThd said:
WiFi not turning on at all for me no matter what configuration chosen during installation and with all possible wipe combinations Pressing WiFi does nothing.
Newest AOKP does not have this issue, running it now.
Click to expand...
Click to collapse
homerwasa said:
I never use WiFi much so I didn't notice. Its borked as stated above.
Other than that nice ROM.
Click to expand...
Click to collapse
blumenthala said:
I can confirm, also, that WiFi does not turn on with this ROM. Th3Bill did post in the Liquid Smooth thread that he would be posting a fix for this very soon.
Thanks Th3Bill!!
Click to expand...
Click to collapse
Unless a new build is up, wifi is working for me as normal.
I was able to finally get wifi to work. I installed paranoid android first and then installed KingKang and everything works beautifully - including wifi!!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
MIUI V5 Galaxy Tab 2
P3110/P3113/P3100?
Hi Guys, im from MIUI PORTING TEAM. I've ported MIUI for this Tab, yeah i think it's to late, but it's better than nothing . Since i don't have this device anymore. so please help me to fix remaining bugs, just report back and give me a logcat.
Then Please read the instruction and FAQ carefully before asking, and HIT
if you like my work
--ROM Details--
-MIUI Sources : Nexus S Official support
-Based CM10.1
-Smooth and Beautifull
--Features--
What's working:
Booting
Camera
Internal & SD card
Wifi?
Bluetooth?
Others?
Issue:
NFC FC --> Open rom with winrar/7zip go to system/app and delete nfc.apk
Can't take screenshot [p3110/p3100?]
Tell me????????
Flashing Instructions
1.Do a nandroid backup first
2.download the rom and copy to sdcard
3.a.If you're on CM or Stock ROM :
- Install the rom from CWM
- Wipe data/Factory reset
- Wipe Dalvik & Cache
- Flash gapps
- Reboot & Enjoy
3.b If wanna upgrade your MIUI
- Install New Version
- Wipe dalvik & Cache
- Reboot & Enjoy
--Download--
MIUI 4.3.7 P31XX
#MIRROR & Multilangpack
--Supported Kernel--
NEXT Kernel 2.15
thanks to @ketut.kumajaya
DhollmenCM Kernelnel
thanks to @tuxafgmur & @Android-Andi for repacked it
Gapps
--Screenshoot--
thanks to @Android-Andi
--Changelog/FAQ--
Later
--Credits--
Without them this rom is not possible, so many thanks to them :
MIUI --> for patchrom and ROM
CyanogenMod Team
MIUI Porting Team
@Android-Andi --> For being awesome tester
@Adi. for fix SystemUi crash
@ketut.kumajaya for his NEXT Kernel
@tuxafgmur for his DhollmenCM Kernel
Note: I am not Responsible for any damage to your phone, just DO IT WITH YOUR OWN RISK
--Addons/MOD/Apps--
GO TO THIS POST
--Screenshot--
••FAQ••
Q: My phone is stuck in bootanimation, plz help me????
A: Please help me too, to Read instruction carrefully before flash it. Wipe data/factory reset or you can stuck in bootanimation FOREVER
Q: Please fix root, i can't access superuser
A: Open Permissions app - Manage ROOT permission - Enabled Root Permission (Press the key above)
Q: Help me, when someone calling, my phone not ringing (cause only vibration) on this rom ,somebody help me?
A: Change phone ringtone in settings - sound, and your phone should be ringing
Q: How to bring more performance in MIUI?
A:
hmm try this
set background proccess limit to "at most 3 process" and turn on force gpu rendering in settings - developer option
set Window animation and transition scale to .5x in settings - developer option
turn off icon shadow and change transitional effect (to whatever you likes) in launcher settings
turn off vibrate on touch in settings - sound
go to security centre folder - app control - and unselect application that you wont make it boot in background process.
Q: Menu key is not working, Where is the application drawer?
A: MIUI ROM Didn't have something like that. just swype homescreen to the right and there is yours app
Q: I Messaging app don't work, i can't SMS
Q: I Can't Copy in file explorer
A: Enable Root Permission - open Root Explorer app - Go to system folder - Open build.prop - and change ro.sf.lcd_density=240
nice,please build for p3100
Finally something :good:
Will test this rom, even still wait for p3100
You might want to actually make the system work at least 99% before you upload it.
Some bugs can remain but if its one of the main things you need specifically for the device then there shouldn't be a rom thread until it is fixed.
But good job anyways!
Ecka_Bz said:
nice,please build for p3100
Click to expand...
Click to collapse
antutu said:
Finally something :good:
Will test this rom, even still wait for p3100
Click to expand...
Click to collapse
will be available soon
Luigi2012SM64DS said:
You might want to actually make the system work at least 99% before you upload it.
Some bugs can remain but if its one of the main things you need specifically for the device then there shouldn't be a rom thread until it is fixed.
But good job anyways!
Click to expand...
Click to collapse
thanks.
yeah i know it. but those systemui only fc if you click on it, otherwise you can operate this rom like ussually.
and actually i've a found to fixed it, its just need anybody here to tried.
Sent from my C5303 using Tapatalk
Hey @imanesaurus !
It´s booting,
Camera works.
No Problems with the Apps (only quick tested).
SystemUI-FC only if i tab on Nitification- or Quicksettings-Bar.
Mobile-Data need´s to be removed for P311X,
Messaging-App and Phone-App need´s to be removed for P311X too.
I´ll try your new Patch right after work and report back (mediafire is down).
I´ll post some screenshots to.
I tried it myself and i faild to port MIUI Someone told "...porting MIUI is a nightmare because it´s not OpenSource.... " i know what he mean
Thanks for your work! Keep it up!
Ya ... bild for p3100 please ...
Sent from my GT-P3100
darn , You did it before me GOOD JOB !!
Where's the download link in the miui forum? Yes, I have used the search but I think I'm too stupid...
Elfaratc said:
Where's the download link in the miui forum? Yes, I have used the search but I think I'm too stupid...
Click to expand...
Click to collapse
Oooppss sorry, i attached a wrong link on OP
fixed it.
try it again
imanesaurus said:
Oooppss sorry, i attached a wrong link on OP
fixed it.
try it again
Click to expand...
Click to collapse
Set rom dpi to more than 160
You can over come system ui force close.....
Congratulations for your new miui port.....
If you need v5 3.19 build let me know ....I have two ports with some bugs.....
Due to some other work I have stoped the project.
Nice work imanesaurus....:thumbup:
Sent from my GT-P3100 using XDA Premium 4 mobile app
Adi. said:
Set rom dpi to more than 160
You can over come system ui force close.....
Congratulations for your new miui port.....
If you need v5 3.19 build let me know ....I have two ports with some bugs.....
Due to some other work I have stoped the project.
Nice work imanesaurus....:thumbup:
Sent from my GT-P3100 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Oh my Gosh
i've figured it out
thanks for your advice dude.
yeah, and maybe you can help me for fix another bug later if you don't mine
really thanks btw
imanesaurus said:
Oh my Gosh
i've figured it out
thanks for your advice dude.
yeah, and maybe you can help me for fix another bug later if you don't mine
really thanks btw
Click to expand...
Click to collapse
Sure.....pm me .
Sent from my GT-P3100 using XDA Premium 4 mobile app
great work dev , finally miui on our tab 2
p3100+
+1 I proud to see this Rom and thanks for being the tester for you @imanesaurus !
---------- Post added at 09:05 PM ---------- Previous post was at 08:43 PM ----------
Screenshot not working on Device,
No problem using adb to get screenshot.
Maybe you can try to remove phone stuff because this is for 3110, waiting for the next build.
Enviado de meu GT-P3110 usando Tapatalk
He´s working on that But Dialer is combined with Contacts removeing Phone.apk will not remove it
it´s not a major bug, don´t know how fast this will be fixed.
Hi guys im just build for p3100.
And its ready.
You can downloaded it here
It's test build i never tried it.
So please tell me how it works
It's booting or not? And etc just give me a feedback
Thank you
Sent from my iPad using Tapatalk