Related
Like when you move an icon from one home screen to another, you slide it to the edge and wait. I've tried a few different cases and they all have such a high edge on them taht they inhibit my thumb/finger's ability to go all the way to the edge of the screen - making it virtually impossible to move an icon.
The bigger issue is that it affects my typing when trying to quickly swype through the "P" or "Q", etc.
So...anyone have a case with a very low profile..allowing your finger to glide over that are similar to a case-less phone? I rarely, if ever, see that being discussed when cases are talked about.
I too am interested in what people have to say about this. I have a 2-piece hard case i don't use because it prevents me from using Swype effectively, so i just resorted to the Zagg full-body screen and avoid putting things in my pocket alongside my phone lol
I just use the verizon high gloss black case. it's a great fit. I actually had the body glove before but moved down to this one... don't drop my phone so I don't feel a need for a huge case ya know? I can now use swype and drag effectively as well.
Is the verizon case a two piece snap on or a flexible pull on?
Try the 'ElCheapo' in my sig.. swype works GREAT with it.
magicmycote said:
Is the verizon case a two piece snap on or a flexible pull on?
Click to expand...
Click to collapse
The Verizon case is a one piece flexible pull on.
I does have the raised lip you are talking about but it is not as pronounced as some of the aftermarket cases I've seen.
Here is one on eBay (this is the one I bought).
Verizon HTC Incredible Black Silicone Gloss Cover OEM
Just a side note...
When moving items from one screen to the other, I find it hard even without a case. A solution that works for me is to press the item you want to move and then use the virtual trackball to move from one screen to the other.
gadget!
gadget! said:
The Verizon case is a one piece flexible pull on.
I does have the raised lip you are talking about but it is not as pronounced as some of the aftermarket cases I've seen.
Here is one on eBay (this is the one I bought).
Just a side note...
When moving items from one screen to the other, I find it hard even without a case. A solution that works for me is to press the item you want to move and then use the virtual trackball to move from one screen to the other.
gadget!
Click to expand...
Click to collapse
not that I'm moving icons around constantly, but this will definitely help me, thanks!
http://www.verizonwireless.com/b2c/store/accessory?action=accessoryDetails&archetypeId=12056&page=1
I have never had any troubles with swype while using this case. It covers no section of the screen and grips onto the small outer edge of the phone. Works like a charm!
I also hate hitting my case when swyping the screen. I find that the argile design case from amzer.com works best for me and I've been using it for a month.
Sent from my ADR6300 using XDA App
admittedly, I don't have my DInc just yet but I ordered/received the Seidio Innocase Actice II for HTC Incredible... It came with a cardboard insert that mimics the phone actually being inside of it... The edges on this case seem to be really low profile and with this cardboard insert my finger can easily glide off edges.
You can get find an in-motion view of the same case for Evo on Youtube—I can't link as I am a n00b
My DInc is coming tomorrow so I will update with results but with the silicone edges and a slight inner bevel to this I think it may be what you're looking for... case features an outer exoskeleton that protects back and corners for more protection than just the silicone material could offer.
UgXvibe said:
Try the 'ElCheapo' in my sig.. swype works GREAT with it.
Click to expand...
Click to collapse
Thanks a bunch for this. Handhelditems.com is amazing!! I just ordered two "ElCheapo" skins and a 3-pack of screen protectors with express shipping (3-5 days) shipping for $15. I've seen a good review of the screen protectors and I think I'll wind up being very pleased for the money.
I used the 30% off coupon code found at http://www.techbargains.com/vendor_detail.cfm/596/Hand-Held-Items-coupon-code
Seidio Active case is pretty much non-intrusive...with good access to the screen.
http://forum.xda-developers.com/showpost.php?p=7424801&postcount=6
UPDATE...
Swype beta appears to be closed but I've had my phone and Seidio Innocase Active for a few weeks now and I think this case will work just fine with Swype and the edge issue you mentioned.
Silicone case from best buy. Just for a red one today.
Sent from my ADR6300 using XDA App
the Barely There case by Case-Mate is the best i've seen thus far. I absolutely love mine. Though the face of the screen isn't protected very well, the corners and back are. Its material feels the same as the battery cover on the back of the device. It looks nice and is very comfortable.
http://www.case-mate.com/HTC-Droid-...e-HTC-Droid-Incredible-Barely-There-Cases.asp
vantagejuan said:
Thanks a bunch for this. Handhelditems.com is amazing!! I just ordered two "ElCheapo" skins and a 3-pack of screen protectors with express shipping (3-5 days) shipping for $15. I've seen a good review of the screen protectors and I think I'll wind up being very pleased for the money.
I used the 30% off coupon code found at http://www.techbargains.com/vendor_detail.cfm/596/Hand-Held-Items-coupon-code
Click to expand...
Click to collapse
Well, I just got my cases and screen protectors yesterday. The cases are fantastic for the price. The screen protectors on the other hand were all cut to big and left bubbles after applying them, so I'm having them send me new ones. At least it was only $4 for all three.
I picked up the Spect case from my local VZW yesterday. I had the faded black/red from vzw and I hated the sides on it.. I wanted a one piece, not a 2 piece..
well this one is friggin awesome. The sales folks working there had never heard/seen the case before and In the 30 minutes I was in the store, 4 employees bought it after playing with it on my phone and 2 additional customers bought it as well. its a one piece design and the interior is cloth so it wont scratch up the screen. I dont have an issue with Swype as it doesn't cover the front at all.
Well worth checking out...
Innocase ii here, no issues at all.
vantagejuan said:
Well, I just got my cases and screen protectors yesterday. The cases are fantastic for the price. The screen protectors on the other hand were all cut to big and left bubbles after applying them, so I'm having them send me new ones. At least it was only $4 for all three.
Click to expand...
Click to collapse
Your welcome! What colors did you get? I got the black first then ordered the Burgundy later on.. I was kinda hoping it would be a bit darker though.
Did they give you any kinda application fluid for the screen protectors?
mattymo said:
the Barely There case by Case-Mate is the best i've seen thus far. I absolutely love mine. Though the face of the screen isn't protected very well, the corners and back are. Its material feels the same as the battery cover on the back of the device. It looks nice and is very comfortable.
http://www.case-mate.com/HTC-Droid-...e-HTC-Droid-Incredible-Barely-There-Cases.asp
Click to expand...
Click to collapse
Those look nice. I'm going to look into those. Thanks
I ordered this on ebay after watching the video on youtube.
http://www.youtube.com/watch?feature=player_embedded&v=9RaUUN1Pgh4
I have to say I'm pretty impressed with it. Very unique design. It's hard, and rubberized to so you can keep a good grip on it.
It's not cheap, I paid about 60 bucks USD for it. Check it out, you guys might like it., I know I do!
Cheers!
Thank you for that! Bit bulky, but has cool features. Please give us an update when it arrives.
Same here. Too bulky and cheaplooking for my taste.
Sent from my GT-P1000 using XDA App
Did look at one like that but I thought it was a bit bulky too. Like the hard front cover for bag protection though.
Using this one on mine with a screen protector and a slip case, for bag protection
http://cgi.ebay.co.uk/BLACK-GEL-CAS..._MobilePhonesCasesPouches&hash=item2c58e50d25
It is excellent quality and offers good bump and scratch protection. It does not increase the footprint much and has a nice lip on the edge to give you a good purchase on the tab while holding it.
Cut outs for ports and buttons are spot on and have enough room around them for a the cables to attach correctly (others do not!)
For the price I am very pleased.
Love the kickstand.
Sent from my GT-P1000 using XDA App
bisto321 said:
Did look at one like that but I thought it was a bit bulky too. Like the hard front cover for bag protection though.
Using this one on mine with a screen protector and a slip case, for bag protection
http://cgi.ebay.co.uk/BLACK-GEL-CAS..._MobilePhonesCasesPouches&hash=item2c58e50d25
It is excellent quality and offers good bump and scratch protection. It does not increase the footprint much and has a nice lip on the edge to give you a good purchase on the tab while holding it.
Cut outs for ports and buttons are spot on and have enough room around them for a the cables to attach correctly (others do not!)
For the price I am very pleased.
Click to expand...
Click to collapse
I have the same case in pink and love it, but I got it at daydeal dot com.
Sent from my glorious Galaxy tab
bisto321 said:
Did look at one like that but I thought it was a bit bulky too. Like the hard front cover for bag protection though.
Using this one on mine with a screen protector and a slip case, for bag protection
http://cgi.ebay.co.uk/BLACK-GEL-CAS..._MobilePhonesCasesPouches&hash=item2c58e50d25
It is excellent quality and offers good bump and scratch protection. It does not increase the footprint much and has a nice lip on the edge to give you a good purchase on the tab while holding it.
Cut outs for ports and buttons are spot on and have enough room around them for a the cables to attach correctly (others do not!)
For the price I am very pleased.
Click to expand...
Click to collapse
I bought the 2nd case for my Galaxy TAB and it's exactly the same case like yours except with white side.
It's cheap but it's good.
The case posted by Big_Totoro is good but, kinda worried the front lid with standing stoppers
which might eventually create marking or scratches on Galaxy TAB screen.
I'm using Incipio Silicrylic with kickstand. It is very nice and rugged. The kickstand kind of sucks but I contacted Incipio and they are going to work something out. Kickstand aside, the case is nice and heavy duty without adding much bulk.
I ordered this case in black just over a week ago and it arrived today. Brilliant fit, barely adds any weight while the device feels fully supported. The different prop positions are also great. My only concern was that it wouldnt fold back on itself to allow good usage one handed, but it a actually folds back on itself really well.
Sent from my GT-P1000 using XDA App
Got mine
It isn't really very bulky. compared to a 3mm rubber skin yeah it is, but that isn't going to give you any protection anyhow
The rubberized outside is very grippy. Easy to hold in one hand without the fear of slippage.
The "stand" parts don't contact the screen at all when closed. It might if you have pressure applied to it, but again, it is soft rubberized finish on those stant peices as well on the inside.
The fit is brilliant. Leaving all the external buttons accessible. The front cover folds back easily, and don't fold over on itself at all.
It feels very sturdy and rugged. Not cheap feeling at all.
Just goin to touch on the "bulkiness" topic again briefly. Most leather or PU leather cases I have looked at at alot bulker than this case. While that MAY off a little more padding, I have noticed that most of those leather cases, the clasp interfers with the view of the screen.
Just my 2 cents
Cheers guys!
Thank you. I haven't found a retailer in Europe though. I hope this will change.
Sent from my Galaxy Tab via XDA DEVS app
bisto321 said:
Did look at one like that but I thought it was a bit bulky too. Like the hard front cover for bag protection though.
Using this one on mine with a screen protector and a slip case, for bag protection
http://cgi.ebay.co.uk/BLACK-GEL-CAS..._MobilePhonesCasesPouches&hash=item2c58e50d25
It is excellent quality and offers good bump and scratch protection. It does not increase the footprint much and has a nice lip on the edge to give you a good purchase on the tab while holding it.
Cut outs for ports and buttons are spot on and have enough room around them for a the cables to attach correctly (others do not!)
For the price I am very pleased.
Click to expand...
Click to collapse
The first peice of accessories for my Tab looks wonderfull I like it , price is fair
Got the same hard case in black, OP said rubberized finish, though mine is more like a textured finish, not sure if there are 2 types?
looks a little plasticy?
sjjones said:
looks a little plasticy?
Click to expand...
Click to collapse
Yes, certainly not what I would call rubbery or soft-touch. I haven't heard back from the seller yet.
Mine is Black as well. I guess we have a difference of opinion on what rubbery feel is
Its hard plastic with a rubberized coating. I dont know how else to explain it. Its not silicon rubbery or so rubbery that it would rub away.
Its not squishy, but its definatly not slippery. So there is a ruberized coating on it.
Sent from my SGH-T849 using XDA App
just got my GT for a week, i saw this case on "yeebay"
will order one during or after the xmas/NY holiday, so i'll receive it as soon as the post office people start working.
Just an update, it turns out that there are 2 versions - the GLARE is not rubberized. I bought this for ~$40 from the seller. According to the seller, this cost less than the rubberized and it made sense cause he is selling the "other" version for ~$60. But when I went back & look at the item # I bought from (he still has units selling under the same item #), the price has gone up to ~$60.
I think the case is fine as is and will not spend return shipping & extra $60 to get the rubberized finish, just put that towards a leather case instaed.
Hi Big_Totoro,
How did you find it at Ebay? I've no idea how it is called or who build it (Manufactor). I was not able to find it anywhere in the web. Can you give me a hint?
Merry Christmas to all people out there!
I bought one of these too and absolutely love it. The fit is perfect, the ergonomics are fantastic (someone has spent a lot of time thinking about how this will be used so it supports all positions), it provides great protection, and the rubberised surface feels great.
I reckon this is the best case I have bought for any device- most useful, and if anything the device feels smaller to me in the case- an illusion obviously, but a testament to the quality of it.
I bought a few cases for my tab, but this is the only one that I will be using
Hi,
I am looking for a case that adds minimal bulk to the device. I would prefer something with a soft-touch finish, but not necessarily silicone.
So far, I have looked at the Seidio Surface, the SGP Ultra Silke, and the Rearth Ringke.
Does anyone know from experience which of these cases is thinnest?
Also, has anyone found other cases that will retain the slimness of the phone?
Thanks.
I dont know from experience but from reading these forums the incipio feather case maybe be the slimmest. Its hard case that snaps on but doesnt cover the top or bottom of the phone. I do got the Rearth Ringke which is awesome. The fit is great.
Sent from my Nexus S 4G using XDA App
hugo87 said:
I dont know from experience but from reading these forums the incipio feather case maybe be the slimmest. Its hard case that snaps on but doesnt cover the top or bottom of the phone. I do got the Rearth Ringke which is awesome. The fit is great.
Sent from my Nexus S 4G using XDA App
Click to expand...
Click to collapse
Thanks for the reply. Is the Rearth Ringke relatively slim as well?
Also interested in a slim case.
Its really not that bad. The fit is great and the texture it has is a nice touch. It has enough grip to keep it from slipping but slippery enough to keep lent and fingerprints off.
Sent from my Nexus S 4G using XDA App
^That's good to know.
Does anyone else have any suggestions for slim cases?
you could get these if you would consider a skin http://www.adreama.com/products/mobile-phone-skins/samsung/nexus-s
they're pretty damn thin, give good grip, protects the outside of your phone from scratches, and you get two so you can pick which color you prefer
I wish case mate would make a barely there case. There seems to be a huge demand for it.
incipio case quite slim, soft, and sexy.. the only drawback is it's quite fragile. my friend bought it awhile ago, he had SOD (sleep of death) many times using netarchy kernel and he had to remove the case to remove the battery. after a few remove, the case start to get loose and finally the case gave up and broke..
hoponpop said:
you could get these if you would consider a skin http://www.adreama.com/products/mobile-phone-skins/samsung/nexus-s
they're pretty damn thin, give good grip, protects the outside of your phone from scratches, and you get two so you can pick which color you prefer
Click to expand...
Click to collapse
This seems interesting. I have found several cases identical to this on eBay for as little as $3 (like this andthis).
The material seems different than other TPU cases, and is just what I am looking for. Anyone else have a case similar to this (TPU, but with matte-finish rubberized rear)?
kvs678 said:
This seems interesting. I have found several cases identical to this on eBay for as little as $3 (like this andthis).
The material seems different than other TPU cases, and is just what I am looking for. Anyone else have a case similar to this (TPU, but with matte-finish rubberized rear)?
Click to expand...
Click to collapse
that second one looks just like the black one that you get in the two pack I posted. I actually think that the black one looks really bad with a black phone, but that's just my opinion.
I have the incipio feather case (black) and love it. Soft touch, great grip, and best of all no fingerprints. Not a tacky rubberized feel that sticks to everything (lint, hair). There is a little space at the top and bottom that isn't covered (bottom for port access) but it looks great. very slim. I bought the standard black case that best but had available on launch day and the crappy rubbery screen protector. Couldn't stand either one and dug out my g1 sleeve cover.
Bought the incipio because I hate the slick back of the phone. Been using it ever since.
I would disagree that it is fragile. I take it off and put it back on at least once a week and haven't had any loosening or breakage (after several months of use). Thing is still rock solid and fits perfectly snug.
hopefully this is helpful.
edit: although it is very thin and adds very little bulk, it is noticeable. With the case on, my phone no longer fits in my g1 sleeve and this makes me kind-of a sad panda.
Sent from my Nexus S using XDA Premium App
hoponpop said:
that second one looks just like the black one that you get in the two pack I posted. I actually think that the black one looks really bad with a black phone, but that's just my opinion.
Click to expand...
Click to collapse
How is your overall experience with the two-pack case that you posted? Does it add too much bulk to the device, or attract dust/lint?
eramsey said:
I have the incipio feather case (black) and love it. Soft touch, great grip, and best of all no fingerprints. Not a tacky rubberized feel that sticks to everything (lint, hair). There is a little space at the top and bottom that isn't covered (bottom for port access) but it looks great. very slim. I bought the standard black case that best but had available on launch day and the crappy rubbery screen protector. Couldn't stand either one and dug out my g1 sleeve cover.
Bought the incipio because I hate the slick back of the phone. Been using it ever since.
I would disagree that it is fragile. I take it off and put it back on at least once a week and haven't had any loosening or breakage (after several months of use). Thing is still rock solid and fits perfectly snug.
hopefully this is helpful.
edit: although it is very thin and adds very little bulk, it is noticeable. With the case on, my phone no longer fits in my g1 sleeve and this makes me kind-of a sad panda.
Sent from my Nexus S using XDA Premium App
Click to expand...
Click to collapse
Thanks so much for the detailed review. I appreciate the input.
The Feather seems to be a promising alternative to the other cases, mainly because I love the soft touch finish.
kvs678 said:
How is your overall experience with the two-pack case that you posted? Does it add too much bulk to the device, or attract dust/lint?
Click to expand...
Click to collapse
I actually think that the phone fits better in my hand with the case on. i'm not worried that i'm going to snap it in half on accident and it's only the tiniest bit bulkier than it normally would be.
I seem to notice little hairs and stuff accumulating right where the case stops, but it's easy enough to either wipe them off without removing the case or to just pull the case off and clean around the edges. overall, I think it's a great case. I added some before and after pictures so you could see how little bulk there is.
I also have the Incipio Feather Case and agree with discussion above. Actually have 2 for 2 phones.
Black is matte finish. Teal is not, but its not a hard, shiny plastic feel. I really like it, questioned buying but so tired of black (their other colors are
very bright, way too much for a mother of 3).
I was looking for the thinnest case possible and feel this is it.
The top and bottom is open so won't protect there, but has the corners.
The thing I love the most is the grip, felt the phone was too slick and just
waiting to drop. This solved that. I do not feel it is fragile, don't take off
that much, but have no problems using fingernail. It is tight, but that is good.
Would highly recommend. And if shopping on Ebay, there are some for $20
shipped. It states Nexus S (not specific for 4g, even on the box when you
receive it), but if it is Incipio, not knock off, it works.
sgp case is very good
Does anybody have this? It looks really sharp (and I'm about to order one) but the only thing holding me back is the top/bottom. It looks like it doesn't cover it properly. Whenever I've dropped a phone and got some scuffs, it's always the top and bottom that take the brunt of it.
If you have this case, could you post some pics? Or provide some insight to the protection? Here is a link to it on Amazon:
http://www.amazon.com/Incipio-MT-143-Feather-Motorola-Bionic/dp/B005DQF7TU
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
envizion58 said:
i had this case for a few weeks now. i'm pretty happy with it. phone sits nice and snug inside the case with a nice feel to the material and barely adds any dimensions it.
the front extends a bit past the edge of the phone so that its raised off your glass if put face down. the top and bottom is exposed but if it falls on any flat surface the edges of the case sticks out far enough that it'll hit the case first and not the phone itself. not sure if the case will pop out on a fall and don't intend to find out, but it fits snug enough that sometimes it takes the back battery door off when i remove the case. screen protector that comes with the case is complete junk.
Click to expand...
Click to collapse
Ok ok, I like. Can you post some pics? I've seen a bunch of pics online, but I want a clear view of the top and bottom.
Sent from my DROID BIONIC using xda premium
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
envizion58 said:
i don't have pics but if you go to this forum post that i started, another guy gave a pretty detailed review with good pics.
apparently i can't post links yet.
here is the full address
forums.androidcentral.com/bionic-accessories/117782-incipio-feather-case.html
Click to expand...
Click to collapse
Thanks for the link, just checked it out. I'm still torn. I absolutely LOVE the look and sleekness of it, but I know as soon as I buy it I'll drop my phone and scuff the top. This would anger me
I dropped my x2 three days after purchase and scuffed it all up right at the top. I haven't let this Bionic be naked once - it was covered before I left the store.
It's a damn shame too - because this phone is sexy naked.
Decisions decisions...
Sent from my DROID BIONIC using xda premium
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
I bought the incipio feather a few weeks ago and its by far the best case out there if you like to keep the curve of the phone and you dont want to add an siginificant bulk
dendthoff said:
I have the Incipio Feather and didn't like how the phone was exposed on the bottom either. I also didn't like the feel of the phone at the bottom with the case on.
I bought a couple Cruzer Lite cases instead and really like them. Check Amazon.
Click to expand...
Click to collapse
Which Cruzer Lite cases did you get?
I for one, love the Feather case...but alas, I contacted Incipio and they have no plans to make one for the extended battery. Does anyone know of a case that is similar to the feather, but fits the extended battery?
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
Thanks for the post - good read.
I researched the case you spoke of and it's very similar to the Verizon gel case I currently have. It definitely provides the right amount of protection, but I'm looking to get that "sexy naked feel" the unprotected Bionic provides.
Here is what I'm thinking. I'm going to order the matte black phantomskinz skin. Cover the top and bottom (the only parts exposed from the incipio feather case) and then rock the incipio. Might be slightly ghetto, but I'm sure I can get it looking good. That will give me the lightweight feel of the incipio case with some protection from nicks and scratches on the top and bottom.
I'll post pics when I make it happen.
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
efingguy said:
I would definitely invest a little more for the balance of sexy and protection, this was just the quick fix for now but its turning into a permanence since it really tops the silicon gels.. pictures just don't do it justice.
youtube search tpu-cases.com review
I've just become a huge fan of TPU after picking this up. I'm not a big fan of high gloss or clear/patterned designs, the matte black is definitely a sexy finish.
Click to expand...
Click to collapse
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Just ordered the incipio feather. I'll give my opinions in two days.
mistawolfe said:
You sure love your TPU. Lol. Few questions:
Have you seen the Verizon gel case that speak of?
How similar/different is it? Size wise? Obviously one is matte and one is glossy.
Just curious, cause that's what I rock, and from pics it seems the matte vs. glossy is the only real noticeable difference.
Sent from my DROID BIONIC using xda premium
Click to expand...
Click to collapse
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
efingguy said:
Yeah, when the Droid X came out, another friend of mine got the Verizon case at the store. The ones we are talking about are the silicone gel cases that are really flexible and rubbery. I would almost describe it as sticky as over time it gets softer and attracts more lint. These slip off the phone easily sometimes. The width that it adds is pretty minimal since it is a floppy material, and a hard shell case is just the opposite in that respect. The hard shell cases in my experience fit the phone real nice, and are not floppy at all, and add minimal width. When you drop a hard shell though, the hardshell cracks over time and it doesnt really distribute the shock. But its to your preference and likelihood of dropping your phone I guess. I'm just really backing how cheap the TPU cases are and how reliable the material is. It seriously is something you have to see to beleive. Let me know how the incipio is!
Click to expand...
Click to collapse
My gel case from Verizon does get very sticky and greasy. Makes me mad.
Sent from my DROID BIONIC using xda premium
Update..
I just noticed my desk dock had a "padding"... it totally fits with this case on!
Got this case today.
Initial impressions:
*Absolutely love the thinness of it. It feels like I don't have a case on. Looks sharp.
CONS:
*No top and bottom protection (I knew this before purchase)
*Back gets smudgey
efingguy said:
Amazon Search: TPU-Cases-Flexible-Motorola
I'm not a big big fan of cases. I had a Droid 1 with the Body Glove that gave really good protection but it made it really bulky and hard to get in and out of pockets. When I upgraded to the Droid X, I just got the full body invisiShield, which worked great but did not protect against drops and dents
The Bionic with the plastic full cover backing, I didn't think a full body invisiShield would have been the right choice to go (actually my friend has it and he has huge peeling problems). When I shopping amazon, I came across this TPU case, and for $9, it was worth a shot... It seriously was the best buy I could've ever made. When its on your phone, it is solid. It doesn't feel flexible and I haven't dropped my Bionic, yet. The backing is a nice matte black -- it has a very natural feel (like you don't have a case). It does add SLIGHT girth/weight, but its not at all cumbersome. The Bionic fits real snug and it lips around the edges in the front (you can set it down face down and the screen doesn't touch the table -- this is a huge convenience, one example would having your phone drop flat on the front side, given that there aren't any rocks or pointed objects (but if you dropped it even w/o the case, well same story...).
The best part, it fits in the Cardock PERFECTLY. Downside, it does not fit on the desk dock... but when I'm at home or at my desk... I rock my Bionic naked... and the case is flexible, so its easy to take off/on.
Click to expand...
Click to collapse
You know what I just realized? When I wrote this post, my phone was in a TPU case. Lol.
I got the smoky argyle one, and definitely loved the appearance and lightweight feel of it. I thought it felt a little janky by the power button (was pretty loose) and there were some leftover nubs from where it was cut - clearly visible against the black background of the screen.
I got some black sandpaper and sanded it down, but it left the case looking like garbage. I got it for $2.95 + $2.95 shipping, so I'm not complaining. I might end up ordering another.
I just got this case, iridescent red one, I agree the top and bottom is exposed but the look and feel of it is very nice. It is very sexy looking as well, doesn't cover anything that shouldn't be covered like holes etc.
The main reason I got this one was that someone said it would fit in the Moto car dock, and it does. However, if I hit a bump some times it pops up justttttt enough to stop charging. Pop it back down and it stays for a while again.
Funny no one else ever mentions this but I live in Florida, and every single black droid I have owned (1, 2, 2global, and now bionic) overheats when going on long trips and using Nav. Can't charge it when it overheats. I wanted to go with Iridescent Red to maybe reflect some of that heat...hope it works.
Also, red and black just go together....
LG made my favorite case for the N5 and it looks like they've made something similar for the 5x as well.
+The official LG Snap On case is hard, thin plastic with no lip and no button coverings. With my N5, it was nearly impossible to tell there was even a case on: it's just that thin.
-The only downside was due to not having a lip, the phone can shift around a tiny bit inside the case as the lip tends to hold the phone in place. It's also a bit expensive ($20-25).
I'll post some links I've found to buy the product here but most of mine are from sites that sell to Canada. Feel free to share any links you've found to buy the case in the US or other countries as well.
http://www.amazon.ca/LG-CSV140ACCAB...449846523&sr=8-2&keywords=LG+nexus+5x+snap+on
http://www.bestbuy.ca/en-CA/product...spx?path=322ebcd1197afd29b6c2f6bcc1108df9en02
http://www.ebay.com/itm/221956645496
http://www.amazon.co.uk/LG-CSV-140-...sr=8-1-spell&keywords=LG+Hardshell+Snap+On+5x
Thanks to @Infekxion for bringing this case to my attention.
For a super-thin case I picked up this one (I'd had one of these imak cases for a Razr Maxx a long time ago as well): http://www.ebay.com/itm/11181578731...49&var=410801075038&ssPageName=STRK:MEBIDX:IT
It does have a small front lip, but is also ultra thin, fits tight as a drum, and at $7 delivered is dirt cheap. Nice texture for better grip as well.
bblzd said:
LG made my favorite case for the N5 and it looks like they've made something similar for the 5x as well.
+The official LG Snap On case is hard, thin plastic with no lip and no button coverings. With my N5, it was nearly impossible to tell there was even a case on: it's just that thin.
-The only downside was due to not having a lip, the phone can shift around a tiny bit inside the case as the lip tends to hold the phone in place. It's also a bit expensive ($20-25).
I'll post some links I've found to buy the product here but most of mine are from sites that sell to Canada. Feel free to share any links you've found to buy the case in the US or other countries as well.
http://www.amazon.ca/LG-CSV140ACCAB...449846523&sr=8-2&keywords=LG+nexus+5x+snap+on
http://www.bestbuy.ca/en-CA/product...spx?path=322ebcd1197afd29b6c2f6bcc1108df9en02
http://www.ebay.com/itm/221956645496
Thanks to @Infekxion for bringing this case to my attention.
Click to expand...
Click to collapse
ravichopra said:
For a super-thin case I picked up this one (I'd had one of these imak cases for a Razr Maxx a long time ago as well): http://www.ebay.com/itm/11181578731...49&var=410801075038&ssPageName=STRK:MEBIDX:IT
It does have a small front lip, but is also ultra thin, fits tight as a drum, and at $7 delivered is dirt cheap. Nice texture for better grip as well.
Click to expand...
Click to collapse
Nice find. Looks like one of the "quick sand" type cases. Those are great too (I had one for my N5) though the official LG case was noticeably thinner and with no lip felt like there wasn't even a case on the device.
On the up side the quicksand cases have unparalleled grip, though some people might be thrown off by the rough texture.
ravichopra said:
For a super-thin case I picked up this one (I'd had one of these imak cases for a Razr Maxx a long time ago as well): http://www.ebay.com/itm/11181578731...49&var=410801075038&ssPageName=STRK:MEBIDX:IT
It does have a small front lip, but is also ultra thin, fits tight as a drum, and at $7 delivered is dirt cheap. Nice texture for better grip as well.
Click to expand...
Click to collapse
Interesting looking case, I think this'll be #3 or 4 i've bought, I tend to accumulate cases until I find one I like. It's certainly cheap enough to be disposable if I don't like it.
Sweet. I remember this case well (in N5 forums) but never got one they were a pita to find for me So I got the ringke slim for the N5 still have it and phone. I've gone caseless on the 5X so far I really like it but my OCD makes me buy cases....
Does it scratch the phone in any way?
I used similar case for my n5 and I remember it scratches corners when I try to put it on/off
ubcjack said:
Does it scratch the phone in any way?
I used similar case for my n5 and I remember it scratches corners when I try to put it on/off
Click to expand...
Click to collapse
I actually never took that case off my N5 since it was easy to forget it had one on lol. I suspect the same will be true for this version. However I could imagine scratches being a possibility since thin hard cases tend to be quite tight and and difficult to remove.
There is a techniques I've seen used to help remove those types of cases safely using a taped credit card.
Any idea where can I get this in the UK? I got the official one from google but it's just too bulky for my liking...
EDIT: Just found it on amazon UK. Here's the link for anyone interested (white version also available!):
http://www.amazon.co.uk/LG-CSV-140-...sr=8-1-spell&keywords=LG+Hardshell+Snap+On+5x
Is this case as slippery as the phone? I normally have my phones naked but for the 5x it is slipping out of my fingers when trying to pick it up on the sides specifically and it has slid out of my pocket a few times.
Shieze said:
Is this case as slippery as the phone? I normally have my phones naked but for the 5x it is slipping out of my fingers when trying to pick it up on the sides specifically and it has slid out of my pocket a few times.
Click to expand...
Click to collapse
Ive yet to receive mine but if it's the same as with the N5 case, the matte plastic will be almost identical to the 5x plastic.
For something with more grip check out that quicksand case linked earlier in this thread. Or if you don't mind a bulkier case I quite like the Diztonic matte texture I've been using for the last couple weeks. It's your standard case size but very easy to pick up and put down, has a better texture for gripping, and no doubt will protect well in a fall.
This thin hardshell is more just to protect from scratches and minor bumps while not noticeably enlarging the size of the device.
I got my case yesterday and finally have a chance to upload some pics. It's a little bit thicker than the original but I enjoy it just as much. The caliper I used may need slight adjustments and the bottom edges gave me the best reading but you get the idea. I really like how there's no lip on this one either.
Infekxion said:
I got my case yesterday and finally have a chance to upload some pics. It's a little bit thicker than the original but I enjoy it just as much. The caliper I used may need slight adjustments and the bottom edges gave me the best reading but you get the idea. I really like how there's no lip on this one either.
Click to expand...
Click to collapse
Thank you. LG Logo looks removable. Is it?
Yes it is, doesn't look like it'll come out accidentally. It's a nice little accent that goes well with the imprint ring.
Sent from my Nexus 5X
Infekxion said:
Yes it is, doesn't look like it'll come out accidentally. It's a nice little accent that goes well with the imprint ring.
Sent from my Nexus 5X
Click to expand...
Click to collapse
It's enough to be removable. I'll consider to buy this one. Maybe the ice one. I don't know.
Has anyone found this in white for sale in the US?
Infekxion said:
I got my case yesterday and finally have a chance to upload some pics. It's a little bit thicker than the original but I enjoy it just as much. The caliper I used may need slight adjustments and the bottom edges gave me the best reading but you get the idea. I really like how there's no lip on this one either.
Click to expand...
Click to collapse
Is the official one scratching phone in anyway when you remove the case?
ubcjack said:
Is the official one scratching phone in anyway when you remove the case?
Click to expand...
Click to collapse
No scratches yet. I have a way of removing the case, same way with the old N5, hold phone with top end pressing into my waist and pry the bottom edges with my thumbnails. Slides off pretty easy. I recommend sitting down while doing it.
Sent from my Nexus 5X
ravichopra said:
For a super-thin case I picked up this one (I'd had one of these imak cases for a Razr Maxx a long time ago as well): http://www.ebay.com/itm/11181578731...49&var=410801075038&ssPageName=STRK:MEBIDX:IT
It does have a small front lip, but is also ultra thin, fits tight as a drum, and at $7 delivered is dirt cheap. Nice texture for better grip as well.
Click to expand...
Click to collapse
is imak thinner than spigen one?
i have spigen case installed. but the spigen's lower left corner has space with phone... too bad....
btw imak is really cheap... only $3 in china, so i am afraid of the protection when phone fall from hands....
ourfear said:
is imak thinner than spigen one?
i have spigen case installed. but the spigen's lower left corner has space with phone... too bad....
btw imak is really cheap... only $3 in china, so i am afraid of the protection when phone fall from hands....
Click to expand...
Click to collapse
None of the thin cases are really designed to protect in a drop. More just for scratches and minor bumps.
They might help a bit but even a thick case is no guarantee to protect the device in a drop.
I've personally tried the Diztronic case which is less than $10. It's made from thicker TPU material with a lip that would offer more drop protection than these thin cases.
"My hand is pretty small - but the phone is very comfortable to hold. :3 ( with and without the fusion case. )
The case made the phone less slippery though. ( which is a good thing - as it is less likely to slip out of my hand, lol. )"