[Q] Installed wrong kernel, boot looping - Sprint HTC One (M7)

Hi all. I think i installed the wrong kernel for my htc one. I was running newest CM10.2 and installed an Aosp kernel. Didn't notice the forum wasnt sprint tho. Been boot looping ever since.
Tried to install rom again, side loaded a new kernel, formatted all. No luck so far.
Any ideas how to fix this?
Edit: I relocked bootloader and attempted to do RUU, but that didn't work. Getting error "cannot load rom.zip"

zaner123 said:
Hi all. I think i installed the wrong kernel for my htc one. I was running newest CM10.2 and installed an Aosp kernel. Didn't notice the forum wasnt sprint tho. Been boot looping ever since.
Tried to install rom again, side loaded a new kernel, formatted all. No luck so far.
Any ideas how to fix this?
Edit: I relocked bootloader and attempted to do RUU, but that didn't work. Getting error "cannot load rom.zip"
Click to expand...
Click to collapse
I'm not 100% sure but sounds like you need to RUU
PM me I will help you out

bigdaddy619 said:
I'm not 100% sure but sounds like you need to RUU
PM me I will help you out
Click to expand...
Click to collapse
im having the same problem please help me. how do i do a RUU

r2stroked2 said:
im having the same problem please help me. how do i do a RUU
Click to expand...
Click to collapse
Check PM

bigdaddy619 said:
I'm not 100% sure but sounds like you need to RUU
PM me I will help you out
Click to expand...
Click to collapse
emailed you

Hello.
I have same problem, can anybody explain, how to fix it ?
Now i have RUU (Sprint_HTC_One_m7wls_1.29.651.7_RUU (.exe)), but i cannot flash it, because i cannot enter in phone OS.
I spent over 24 hours to fix, but nothing....
Found something in log file (just before reboot):
E/MP-Descision( 198): Error 16 settings /sys/devices/system/cpu/cpu3/online online status to 1
E/MP-Descision( 198): Error 16 settings /sys/devices/system/cpu/cpu2/online online status to 1
E/MP-Descision( 198): Error 16 settings /sys/devices/system/cpu/cpu1/online online status to 1
I guess it about swap2wake function, but why it saved after i have flashed kernel (and ROM and recovery and RUU too (via .zip))....

Same Problem
i have the same problem ... can you help me plz
---------- Post added at 05:14 PM ---------- Previous post was at 05:10 PM ----------
BD619 said:
Check PM
Click to expand...
Click to collapse
can you help me as i have the same problem ... thanks in advance

ayehia2005 said:
i have the same problem ... can you help me plz
---------- Post added at 05:14 PM ---------- Previous post was at 05:10 PM ----------
can you help me as i have the same problem ... thanks in advance
Click to expand...
Click to collapse
Either use the latest RUU
Or
Follow this guide

Related

[Q] for 4.1.2 root, what is the difference between build no.?

Hi,
I want to root my device, which i have upgraded recently to 4.1.2
the thing is, I found some information in root threads regarding build no. like XXAMA1, XXAMA2, XXAMA4 ...etc
what are the differences between them? if all of them are 4.1.2 JB?! will anyone work?
to make it easier, which thread can work to root my SG3mini device:
Android version: 4.1.2
Baseband version: I8190XXAMA3
Kernel version: 3.0.31-860525
Build number: JZ054K.I8190XXAMA3
You can just root the one you got. No need to re-flash the whole rom.
---------- Post added at 10:54 PM ---------- Previous post was at 10:39 PM ----------
Here is also a very good explanation on these PDA/PHONE/CSC codes.
tys0n said:
You can just root the one you got. No need to re-flash the whole rom.
---------- Post added at 10:54 PM ---------- Previous post was at 10:39 PM ----------
Here is also a very good explanation on these PDA/PHONE/CSC codes.
Click to expand...
Click to collapse
can you root with a 4.1.1 custom version on a 4.1.2?
TerenceTP7 said:
can you root with a 4.1.1 custom version on a 4.1.2?
Click to expand...
Click to collapse
Yes you can, but only if you make a factory reset first. Otherwise you'll have bootloops or force closed apps.
tys0n said:
Yes you can, but only if you make a factory reset first. Otherwise you'll have bootloops or force closed apps.
Click to expand...
Click to collapse
now i have a official firmware 4.1.2 ,baseband I8190XXAMA2.before this i had a rooted 4.1.1 by avicoh.but my phone didnt boot anymore,so i flashed with the official 4.1.2 and after that with PARAM.
so now i need to factory reset,but the one that i now have isnt the one that came with my phone from the store.doesnt it give any problems when i factory reset?
original from the store was 4.1.1 JB
TerenceTP7 said:
now i have a official firmware 4.1.2 ,baseband I8190XXAMA2.before this i had a rooted 4.1.1 by avicoh.but my phone didnt boot anymore,so i flashed with the official 4.1.2 and after that with PARAM.
so now i need to factory reset,but the one that i now have isnt the one that came with my phone from the store.doesnt it give any problems when i factory reset?
original from the store was 4.1.1 JB
Click to expand...
Click to collapse
No it shouldn't be any problem. Factory reset makes sure there is no leftovers from previous install. Clears cache, settings, user data.
tys0n said:
No it shouldn't be any problem. Factory reset makes sure there is no leftovers from previous install. Clears cache, settings, user data.
Click to expand...
Click to collapse
alright,i trust you on this.i did the reset my phone rebooted and now its stuck on the bootlogo(galaxys3mini gt-i8190).do i need to wait?or?
..
..
still stuck on bootlogo after 10minutes.doesnt look good.use param again?
---------- Post added at 06:04 PM ---------- Previous post was at 05:40 PM ----------
ok,that didnt work..man im getting headache of this..
i booted my phone again using PARAM.
do you know a root version for my phone?maybe a version that clear all my data too?
---------- Post added at 06:28 PM ---------- Previous post was at 06:04 PM ----------
TerenceTP7 said:
alright,i trust you on this.i did the reset my phone rebooted and now its stuck on the bootlogo(galaxys3mini gt-i8190).do i need to wait?or?
..
..
still stuck on bootlogo after 10minutes.doesnt look good.use param again?
---------- Post added at 06:04 PM ---------- Previous post was at 05:40 PM ----------
ok,that didnt work..man im getting headache of this..
i booted my phone again using PARAM.
do you know a root version for my phone?maybe a version that clear all my data too?
Click to expand...
Click to collapse
the one that you have http://forum.xda-developers.com/showthread.php?t=2178346 is this a root version?for the netherlands?can i use it on my phone?
Just flash a wipe.tar and then your firmware.
I never had to flash param.lfs to get it boot.
Once I had to pull the battery and power on again when it got stuck on boot after flash.
tys0n said:
Just flash a wipe.tar and then your firmware.
I never had to flash param.lfs to get it boot.
Once I had to pull the battery and power on again when it got stuck on boot after flash.
Click to expand...
Click to collapse
i did used it once that wipe.tar but get stuck on bootscreen.
do you need to wait long on bootscreen while flashing with wipe.tar?
and how does it work?just odin>pda,select wipe.tar>start?
TerenceTP7 said:
i did used it once that wipe.tar but get stuck on bootscreen.
do you need to wait long on bootscreen while flashing with wipe.tar?
and how does it work?just odin>pda,select wipe.tar>start?
Click to expand...
Click to collapse
Yes flash as pda. It's basicly the same as a factory reset.
If your phone reboots after, just put it in download again and flash firmware.
tys0n said:
Yes flash as pda. It's basicly the same as a factory reset.
If your phone reboots after, just put it in download again and flash firmware.
Click to expand...
Click to collapse
and what if its get stuck on bootscreen again.use PARAM?
TerenceTP7 said:
and what if its get stuck on bootscreen again.use PARAM?
Click to expand...
Click to collapse
Afaik the param.lfs is mostly just a bunch of pictures. Don't know what it does, except loads the phone with startup/downloadmode pictures.
http://forum.xda-developers.com/showthread.php?t=1750645
http://z4ziggy.wordpress.com/2010/09/18/looking-into-param-lfs-file/
tys0n said:
Afaik the param.lfs is mostly just a bunch of pictures. Don't know what it does, except loads the phone with startup/downloadmode pictures.
http://forum.xda-developers.com/showthread.php?t=1750645
http://z4ziggy.wordpress.com/2010/09/18/looking-into-param-lfs-file/
Click to expand...
Click to collapse
i dont get it.i have my 4.1.2 rooted now,but after flashing ,my phone doesnt boot.it only boots when i flash the PARAM file.i restarded my phone to check if that works and that works fine.i dont think this is a big problem,is it?
at first sight everything works fine.
WIPE doesnt work,and factory reset doesnt work either.is there a option to do this manually.i have clear master,is that the same?
tys0n said:
You can just root the one you got. No need to re-flash the whole rom.
---------- Post added at 10:54 PM ---------- Previous post was at 10:39 PM ----------
Here is also a very good explanation on these PDA/PHONE/CSC codes.
Click to expand...
Click to collapse
thank you tys0n for your replies! i kept my CSC, didn't change it.. since i'm already having 4.1.2 (last firmware for s3 mini till now)
and followed this way to root my device:
http://forum.xda-developers.com/showthread.php?t=2150979
and it worked
the only thing is, this way increased the flash counter! i dont know how is this bad, but i guess just if i want to give it to someone to check it, they will know, right?!
BUT I found other rooted ROM that they will reset binary count after flash to "none"! and will show firmware as "official" instead of "custom"..
anyway, good to learn and i'm saying all that just in case any noob like me saw this thread in the future maybe they can find one useful info or two
sorry TerenceTP7 that i can't help you.. still new to those things..
and thank you again tys0n
Sv: [Q] for 4.1.2 root, what is the difference between build no.?
Search triangle away here on xda. It's an app that will reset your binary count to zero
Sent through time and space from my s3mini.

Stuck in twrp

I rooted the wwrong rom them it deleted everything off the phone so im stuck now.....I cant even mount in adb it keeps saying device not found i cant figure it out i just wanna get back to stock but when i try the RUU it just tells me i have a newer image than the one its trying to go to....S-on so it wont do anything!! someone please help me!!!!!!! this is my roomates phone im use to using Samsung not HTC! i just need a walk through thanks in advance to whoever can help me!!!!
ballerfree said:
I rooted the wwrong rom them it deleted everything off the phone so im stuck now.....I cant even mount in adb it keeps saying device not found i cant figure it out i just wanna get back to stock but when i try the RUU it just tells me i have a newer image than the one its trying to go to....S-on so it wont do anything!! someone please help me!!!!!!! this is my roomates phone im use to using Samsung not HTC! i just need a walk through thanks in advance to whoever can help me!!!!
Click to expand...
Click to collapse
I would start right here
http://forum.xda-developers.com/showthread.php?t=2317989
budeone said:
I would start right here
http://forum.xda-developers.com/showthread.php?t=2317989
Click to expand...
Click to collapse
The phone wont recognize it when i tried that......no nevice found
ballerfree said:
The phone wont recognize it when i tried that......no nevice found
Click to expand...
Click to collapse
Ok, you have sdk installed and all your drivers installed?
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
And this link
http://forum.xda-developers.com/showthread.php?t=2258809
budeone said:
Ok, you have sdk installed and all your drivers installed?
---------- Post added at 05:21 PM ---------- Previous post was at 05:18 PM ----------
And this link
http://forum.xda-developers.com/showthread.php?t=2258809
Click to expand...
Click to collapse
yep iv done everything i can think of lol
ballerfree said:
yep iv done everything i can think of lol
Click to expand...
Click to collapse
Do you see the phone in device manager?
no? im not sure where that is actually lol
Hit me up on gtalk

No ROM, can't flash, brick??? Please help!!

Hello everyone,
First I want to say thank you all for the work you have done. Recently I started messing around with my HTC ONE from Sprint.
Well I think I screwed everything up. First, I want you all to know I spent the last 8 hours searching the internet and trying different things and well, I am about to throw in the towel. I am hoping someone may be able to help.
I somehow deleted everything on my device, including the rom. I cannot get past the HTC screen now nor can I get any roms back on. I have tried twrp but it will not let me mount the /data nor will sideload work, it just fails. Adb doesn't seem to work at all, never sees my device yet fastboot sees it every time. I have tried using fastboot to upload a rom yet I get strange errors like some sort of android text not being in the rom. I tried the stock RUU but it doesn't seem to want to take.
So with all that said, can someone please help me. I have the HTC drivers installed and it shows "MyHTC" under my devices in the control panel. I also have the SDK tools installed. When in twrp and under the "mount" option, it says storage has 0mb. I can't think of anything else to do but rip my hair out. I have honestly been working on this for hours straight.
EDIT: I also have my phone unlocked and it was rooted before all this mess. I still have s-on and havent figured out to turn it off now that it is all messed up.
Please help!
Thank you!
I would highly suggest pm-ing big daddy619. If he is willing, he can get you up and running. Also to start make sure your sdk tools are updated to work with 4.3 it's rev 18 or 19. Plus big daddy has a very intuitive guide at top of q&a section. Good luck!!
Did you re-lock your bootloader when you ran the RUU?
---------- Post added at 03:56 AM ---------- Previous post was at 03:55 AM ----------
jblaze10 said:
I would highly suggest pm-ing big daddy619. If he is willing, he can get you up and running. Also to start make sure your sdk tools are updated to work with 4.3 it's rev 18 or 19. Plus big daddy has a very intuitive guide at top of q&a section. Good luck!!
Click to expand...
Click to collapse
^^^^ninja'd lol
bigdaddy619 said:
Did you re-lock your bootloader when you ran the RUU?
Click to expand...
Click to collapse
I did re-lock my boot loader when I ran the RUU.
Speak of the devil!!
fireforsin said:
I did re-lock my boot loader when I ran the RUU.
Click to expand...
Click to collapse
Are you getting any errors?
bigdaddy619 said:
Did you re-lock your bootloader when you ran the RUU?
---------- Post added at 03:56 AM ---------- Previous post was at 03:55 AM ----------
When I run the RUU is says my current image version is 3.04.651.2. It doesn't get past the sending portion. Then I get an error 155 and it tells me to get the correct rom update utility.
Click to expand...
Click to collapse
fireforsin said:
bigdaddy619 said:
Did you re-lock your bootloader when you ran the RUU?
---------- Post added at 03:56 AM ---------- Previous post was at 03:55 AM ----------
When I run the RUU is says my current image version is 3.04.651.2. It doesn't get past the sending portion. Then I get an error 155 and it tells me to get the correct rom update utility.
Click to expand...
Click to collapse
Are you using this RUU?
http://www.htc.com/us/support/news.aspx?p_id=629&p_name=htc-one-sprint
Click to expand...
Click to collapse
bigdaddy619 said:
fireforsin said:
Are you using this RUU?
Click to expand...
Click to collapse
I was using Sprint_HTC_One_m7wls_3_04_651_2_RUU which I found on a forum I believe. Honestly can't remember because I have downloaded so many different roms and fixes.
I will try the one you suggest right now.
Click to expand...
Click to collapse
^^^^ninja'd lol
Freakin Burt wonderstone!!!
While I am downloading it, do you know any reason why the ADB won't see my phone but fastboot does fine?
bigdaddy619 said:
fireforsin said:
Are you using this RUU?
Click to expand...
Click to collapse
Well, same thing with the RUU you suggested. Error 155 I am so frusturated over this.
Click to expand...
Click to collapse
Once you get the ruu done do this to install the drivers properly(they may install in OS,bootloader,recovery)
ADB = OS & recovery
Fastboot = bootloader
Unplug your phone
Uninstall everything HTC
Reboot your PC
Use these drivers http://d-h.st/FXC
Install above drivers
Plug phone in and let the drivers install (in OS,Recovery,Bootloader) if your PC and phone still don't talk to each other in all 3 modes do this
On your PC go to device manager and find your phone(usually M7WLS), right click and select properties
Select the driver tab
Select update driver
Select browse my comp
Let me pick
Look for ADB USB device or similar should be one of the first couple choices
Select MyHTC install and you should be good
---------- Post added at 04:32 AM ---------- Previous post was at 04:30 AM ----------
fireforsin said:
bigdaddy619 said:
Well, same thing with the RUU you suggested. Error 155 I am so frusturated over this.
Click to expand...
Click to collapse
Check PM
Click to expand...
Click to collapse
Solved, thanks bigdaddy619!!
Make sure you try different usb ports, it's as simple as that.

cant flash roms on twrp?

im on twrp v2.8.1.1 and im trying to flash roms and i keep getting failed... i factory reset and wipe and still im i doing something wrong? im on lollipop now..
re: failure flashing in twrp
markysd said:
im on twrp v2.8.1.1 and im trying to flash roms and i keep getting failed... i factory reset and wipe and still im i doing something wrong? im on lollipop now..
Click to expand...
Click to collapse
You need to be more specific as to why it failed, read the text on twrp's
screen which tells you a little bit about the cause of the failure.
Good luck!
Misterjunky said:
You need to be more specific as to why it failed, read the text on twrp's
screen which tells you a little bit about the cause of the failure.
Good luck!
Click to expand...
Click to collapse
well i got it to work now.. idk what happen.. just get a red lettering says failed.. but now s pen still wont work might have to go back to my other post about it
markysd said:
im on twrp v2.8.1.1 and im trying to flash roms and i keep getting failed... i factory reset and wipe and still im i doing something wrong? im on lollipop now..
Click to expand...
Click to collapse
Bad download and upgrade already . twrp is been upgraded lol.
BACARDILIMON said:
Bad download and upgrade already . twrp is been upgraded lol.
Click to expand...
Click to collapse
whats the latest twrp?
2.8.6 or so
---------- Post added at 11:18 PM ---------- Previous post was at 11:17 PM ----------
http://forum.xda-developers.com/showthread.php?t=2915588
BACARDILIMON said:
2.8.6 or so
---------- Post added at 11:18 PM ---------- Previous post was at 11:17 PM ----------
http://forum.xda-developers.com/showthread.php?t=2915588
Click to expand...
Click to collapse
ok going to update it... maybe this will six my s pen not working also
No it wont. We need ur full story in one thread.

Stock boot.img..

Close thread please.. Thank you.
Hi
beachbum40 said:
I'v been looking for the stock boot.img for this build. Has someone pulled this boot.img yet..thanks
Click to expand...
Click to collapse
I've got nexus 6 and the problem is that is STATUS CODE 2 and I can't unlock bootloader again.
But again I can't entar the system eather it says Android is starting,optimizing 1of126 and restart... Does it have solution for this or not?
beachbum40 said:
I'v been looking for the stock boot.img for this build. Has someone pulled this boot.img yet..thanks?
Click to expand...
Click to collapse
Just extract the stock rom with 7-zip and you'll see the different IMG files, including boot.img.
---------- Post added at 08:53 PM ---------- Previous post was at 08:52 PM ----------
VladimirX3M said:
I've got nexus 6 and the problem is that is STATUS CODE 2 and I can't unlock bootloader again.
But again I can't entar the system eather it says Android is starting,optimizing 1of126 and restart... Does it have solution for this or not?
Click to expand...
Click to collapse
Boot into recovery and data factory reset.
gee2012 said:
Just extract the stock rom with 7-zip and you'll see the different IMG files, including boot.img.
---------- Post added at 08:53 PM ---------- Previous post was at 08:52 PM ----------
Boot into recovery and data factory reset.
Click to expand...
Click to collapse
I have to apologize to everyone for this not so smart post.? I had a few drinks in me and obviously wasn't thinking clearly.. ?
Before anybody says anything "no I'm not a drunk" lol. I just happened to have a few glasses of wine to many. I'm seriously a lightweight.. Anyway after my head cleared up I realized what to do. I've been an Android enthusiast for some time now and its rare that I ask for help.
I really appreciate the suggestions though and will be asking for this post to be removed..
I also appreciate you all not flaming me as well?

Categories

Resources