Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.
Thaantje said:
Hey All,
I searched the web on and on and cant figure it out.
My provider Vodafone in holland provides me with 4G.
On some sites i read there is a minor update which activates the LTE option.
that update is for the I9505..
I cant find if its possible to unlock my LTE option.
i have the I9295. And throug kies or OTA is no update
I hope you can help me out guys.
Click to expand...
Click to collapse
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?
Cederic said:
I can't really help you but as far as I know LTE is already unlocked and working on all international S4 Actives. Mine certainly worked perfectly out of the box - although I turned it off promptly because I have ****ty 4G coverage where I live so it was nothing but a battery drain for me.
Are you sure you have a 4G sim card, and that you are in an area where 4G has coverage?
If you go in under settings > connections > more networks > mobile networks > network mode don't you have the LTE option at the top?
Click to expand...
Click to collapse
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm
Thaantje said:
Im not 100% but i got the textmessage from my provider, so i recon they only send it to people who are able to use the 4G.
Yes, i am in a 4g coverage area
i dont have the LTE option at the top no. i have:
- wcdma/gsm
- only wcdma
- only gsm
Click to expand...
Click to collapse
Well then I really have no idea - the only thing I can think of is that you might need to replace your sim card if your provider didn't already do so in advance of the 4G rollout. Hopefully someone with more information might step in here, but the international version is LTE capable out of the box. If you don't hear anything else I'd suggest to try and contact vodafone and get a clear answer from them first.
If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.
br0adband said:
If you check the mobile networks in your area and don't see anything that supports LTE, you may just live in an area that doesn't have it yet (people get 4G and LTE somewhat mixed up - 4G is the overall identifier for a whole class of technologies with "4th generation cellular networks" basically while LTE is technically one of those technologies so, it should rightfully be classified as 4G in most respects.
Having said that, the only way I got my GS4A to function in LTE mode - meaning it actually shows LTE in the notification bar under the 4 with a small G and LTE underneath it - was to go into the service menu (*#*#4636#*#*) and change the preferred network type to either LTE only or LTE/GSM auto (PRL). Once I did that the radio would reset and connect and then it would be in proper LTE mode. Doing a speedtest with the Speedtest.net app shows LTE as the connection whereas with my standard setting which is WCDMA Preferred (T-Mobile AWS) it'll just show as "4G."
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional. I don't use it because here in Vegas where I live (specifically my home location) the LTE mode gets me about 1-2 bars of signal (about 8-12Mbps) whereas the WCDMA Preferred setting pulls in 5 bars rock solid and 25-35Mbps.
Can't do screenshots or I'd add them, I'm running the pre-release MI2 ROM presently and that aspect is borked.
Click to expand...
Click to collapse
I can check my area on the vodafone site. I live in a 4G network area 100%!
i guess my wcdma is sufficient then.. didnt experience speedboost tho..
br0adband said:
I've had no luck making alterations in the Settings/Mobile Networks section, I have to change it in the service menu to get LTE functional.
Click to expand...
Click to collapse
That would be because you're on the i537 from ATT, rather than the i9295 that this discussion is about. I checked google and vodafone holland does indeed use LTE on the right bands in its brand new rollout, so it isn't that - most likely it's his sim that needs replacing or it's just not activated on his account yet.
Hi, I have an F340L and from the hidden menu I've set the Data connection to Global+LTE. When I'm in an LTE area the phone automatically connects to the 3G network and not to 4G. In order to make a 4G connection I have to enter the hidden menu, set it to LTE only, the device reboots and then the LTE connection is possible. Why is that? I mean why the device prefers 3G in an LTE area and needs the above procedure. Is there anyway to bypass that without a reboot or even automatic 4G connection? Any workaround, input or comments are welcome.
Guide: How to turn LTE off
Turning LTE OFF can be very beneficial to the end user. Turning LTE off can boost your signal and save battery life in areas of weak LTE signal strength. HSPA+ and EDGE signals travel further than LTE signals. At the time of this writing, AT&T’s HSPA+ network performs very, very well. Most people have switched to LTE. It is very easy to pull 10mbps down on HSPA+. Therefore, if LTE is congested you can try out HSPA+ (AT&T calls this 4G). Some people also like to force the device to LTE only; this way they don't get calls, but can receive texts.
1. Open dialer
2. Dial *#*#4636#*#*
3. Device information
4. Scroll down and then choose your preferred network type:
WCDMA Preferred = Your phone will prefer UMTS/HSPA or HSPA+. Will connect to EDGE if it has to. NO LTE.
GSM Only = If selected, your phone will only connect to EDGE (2G). You will be able to call, text, and use slow data.
WCDMA Only = UMTS/HSPA+ only. No EDGE, or LTE whatsoever
GSM/CDMA Auto= Will connect to either UMTS/HSPA/HSPA+ or EDGE (which ever one is available)
LTE/CDMA Auto = Will only connect to LTE and UMTS/HSPA/HSPA+, NO EDGE
LTE/GSM/CDMA Auto = Will connect to LTE, EDGE, or UMTS/HSPA/HSPA+
LTE/GSM Auto = DEAFAULT SETTING
LTE Only = You will only have LTE. You cannot make calls under this setting. Good for those who want data and text capabilities.
Hope this helps!!!
MattMJB0188 said:
Guide: How to turn LTE off
Turning LTE OFF can be very beneficial to the end user. Turning LTE off can boost your signal and save battery life in areas that don’t have good LTE signal strength. HSPA+ and EDGE travel further than LTE signals. At the time of this writing, AT&T’s HSPA+ performs very, very well. Most people have switched to LTE. It is very easy to pull 10mbps down on HSPA+. Therefore, if LTE is congested you can try out HSPA+ (AT&T calls this 4G).
• Open dialer
• Dial *#*#4636#*#*
• Device information
• Scroll down and then choose your preferred network type
o WCDMA Preferred = Your phone will prefer UMTS/HSPA or HSPA+. Will connect to EDGE if it has to. NO LTE.
o GSM Only = If selected, your phone will only connect to EDGE (2G). You will be able to call, text, and use slow data.
o WCDMA Only = UMTS/HSPA+ only. No EDGE, or LTE whatsoever
o GSM/CDMA Auto= Will connect to either UMTS/HSPA/HSPA+ or EDGE (which ever one is available)
o LTE/CDMA Auto = Will only connect to LTE and UMTS/HSPA/HSPA+, NO EDGE
o LTE/GSM/CDMA Auto = Will connect to LTE, EDGE, or UMTS/HSPA/HSPA+
o LTE/GSM Auto = DEAFAULT SETTING
o LTE Only = You will only have LTE. You cannot make calls under this setting
Hope this helps!!!
Click to expand...
Click to collapse
Will the change last through a reboot or does it need to be changed every time the phone is restarted?
scott14719 said:
Will the change last through a reboot or does it need to be changed every time the phone is restarted?
Click to expand...
Click to collapse
Yes. For each reboot you'll have to repeat the above steps. However, I would rather do this, than have to take out the sim each time.
MattMJB0188 said:
Yes. For each reboot you'll have to repeat the above steps. However, I would rather do this, than have to take out the sim each time.
Click to expand...
Click to collapse
I wonder if a NFC task program can be used to program the sequence into a NFC tag so it can be easily changed each time?
scott14719 said:
I wonder if a NFC task program can be used to program the sequence into a NFC tag so it can be easily changed each time?
Click to expand...
Click to collapse
That I don't know.
Thanks! I switched from the default to WCDMA preferred and seem to have a better signal where I live (on a mountain).
Sent from my SAMSUNG-SM-G900A using XDA Premium 4 mobile app
MattMJB0188 said:
Guide: How to turn LTE off
WCDMA Preferred = Your phone will prefer UMTS/HSPA or HSPA+. Will connect to EDGE if it has to. NO LTE.
GSM Only = If selected, your phone will only connect to EDGE (2G). You will be able to call, text, and use slow data.
WCDMA Only = UMTS/HSPA+ only. No EDGE, or LTE whatsoever
GSM/CDMA Auto= Will connect to either UMTS/HSPA/HSPA+ or EDGE (which ever one is available)
LTE/CDMA Auto = Will only connect to LTE and UMTS/HSPA/HSPA+, NO EDGE
LTE/GSM/CDMA Auto = Will connect to LTE, EDGE, or UMTS/HSPA/HSPA+
LTE/GSM Auto = DEAFAULT SETTING
LTE Only = You will only have LTE. You cannot make calls under this setting. Good for those who want data and text capabilities.
Click to expand...
Click to collapse
Sorry if this is a stupid question but I don't want to screw up my phone. Which would be the default in case I want to turn LTE back on?
alryder said:
Sorry if this is a stupid question but I don't want to screw up my phone. Which would be the default in case I want to turn LTE back on?
Click to expand...
Click to collapse
You will not screw your phone up, no matter which setting you choose. LTE/GSM Auto is the default setting. Once you select your preferred network it will not stick once you reboot your device anyway.
Which one is the best?
galaxy s4 nutjob said:
Which one is the best?
Click to expand...
Click to collapse
Probably leaving it on automatic.
isn't there a toggle switch or a widget that you can download from play store to do he same thing? just wondering
+1. Also interested in a widget of sorts. Any ideas?
plarser48 said:
+1. Also interested in a widget of sorts. Any ideas?
Click to expand...
Click to collapse
There are widgets, but they do not work.
Cannot turn off LTE with above instructions
When I try to follow the instructions, I dial the number and a pop-up appears with "USSD Code Running..." then it closes and a new pop-up appears saying "connection problem or invalid MMI code". I have tried to make this call from various areas with better connections than in my house, but still to no avail. I'd really like to disable the LTE because it is only strong enough to constantly force changes from 4G to LTE and back while massively draining my battery in the process. Any advice?
I upgraded from S3 to S5... In Out location there is one LTE tower.
When at office which is bit far from LTE tower, It only connects to LTE and due to congestion i always get 0.2 mbps only..
But When i had S3, it will switch automatically to 4G(HSPA+) at office and at home or shopping it connects to LTE.
So I called ATT support and they said its due to network congestion and they switched to 4G on their side.
So now its always shows 4G only no LTE but speed are good like 8 to 10 mbps..
I tried the steps in post1 and it shows WCDMA preferred... Is this what they modified remotely?
Try Intelli3G everyone, you have to install Xposed framework and then install it but this app is amazing for convenience.
I tried changing to LTE option its not allowing. I can change to other options other than LTE.
Any idea.. Is it controlled by AT&T?
I called ATT and asked them to change it to LTE.
Now I can change the settings as needed.
So if ATT sets to 4G, you wont be able to switch to LTE.
Is this the only way to change the preferred network mode on SAMSUNG-SM-G900A, ie. by going to details mentioned under #2
Has anyone tried this lately? I know the old 4636 code worked on older galaxies buy I can't get my G900a to respond. Still on 4.4.2
Work fine here on 4.4.2 and 5.0
Sent from my SAMSUNG-SM-G900A using XDA-Developers mobile app
PagePlus does not activate an LTE phone on their "low-end" plan but allows a modified LTE phone to be activated. I used an app to make it CDMA only but PagePlus still cannot activate it saying it has some issues because their system still thinks it is LTE. I wonder if I have to something special on the phone.
I unlocked fast boot. The phone is not yet rooted.
Any help is appreciated.
Network connections? Set preffered to 3G/2G.
@kyzn is right with going to Settings > More > Cellular networks > Preferred network type and selecting 3g. This does not mean it will be in 3g only because 2g is there for a backup network signal in case that the 3g or higher signal is lost. Shouldn't be problem for you with what you are asking.
If you would like a little more info here is a link to the similar OP
http://forum.xda-developers.com/showthread.php?t=2602681
Grab this app, it'll take you to a menu which lets you select the mode you want.
https://play.google.com/store/apps/details?id=com.tapbase.LTEswitcher
Hi,
I spoke to my service provider and they enabled 4G on my account.
I then went into their shop and got a new SIM card, as my old one was 3G only.
So now I have 4G on my account, and a 4G compatible SIM card.
When I go into settings, all I get is the option for 2G/3G auto, and 3G only. No option for 4G/LTE.
I can type in *#*#4636#*#* and get into settings and enable LTE, and then I get the LTE icon at the top and I can go online. However, when I go back into Mobile Data settings, as soon as the screen opens, my internet drops and it reverts to "H" or "3G" at the top. Once again, when I click the option, it only display 2G/3G or 3G only.
How can I activate the option in my OS so it shows up here?
I am running Android Revolution (ARHD) version 92.
Thanks.