Related
Dropped my phone and the screen is all inked up NOW!
I purchased the phone about a month and a half ago...
the screen is the only thing thats messed up...it still made sounds and stuff like normal.
WHAT SHOULD I DO"?
Im so confused.
NappyBoy001 said:
Dropped my phone and the screen is all inked up NOW!
I purchased the phone about a month and a half ago...
the screen is the only thing thats messed up...it still made sounds and stuff like normal.
WHAT SHOULD I DO"?
Im so confused.
Click to expand...
Click to collapse
Is it "obvious" that the phone took a fall? If not, then you could probably get it replaced by calling AT&T's handset repair department (800-801-1101, I think) and just lie to them.
I never had a screen issue with my 8125, but I did brick around 7 of them from various issues with flashing custom roms. As long as I was careful with how I worded it, I got a new phone each time.
NotATreoFan said:
Is it "obvious" that the phone took a fall? If not, then you could probably get it replaced by calling AT&T's handset repair department (800-801-1101, I think) and just lie to them.
Click to expand...
Click to collapse
Screens don't just crack. They'll sniff out the lie.
and another one...i do feel better now after i broke mine, since it is a tilt u should be able to go through service see how much that will cost, if its over $200 u might be better off doing it urself by getting a screen elsewhere
My screen was cracked after 4 days of having it :')
It was inside my pocket without any further protection and i walked against something. Did cost me 136 euro to fix the screen.
NotATreoFan said:
get it replaced by calling AT&T's handset repair department (800-801-1101, I think) and just lie to them.....As long as I was careful with how I worded it, I got a new phone each time.
Click to expand...
Click to collapse
the phone dosent really looked banged up on anything. what should i tell them. i really wanna get out of this not paying a thing...i paid to much for this phone.
benchMarc said:
My screen was cracked after 4 days of having it :')
It was inside my pocket without any further protection and i walked against something. Did cost me 136 euro to fix the screen.
Click to expand...
Click to collapse
where did you get yous fixed?
Unless you insured it somehow, you're going to have to pay to replace it. I don't see why anyone should pay for your accident if you didn't arrange coverage for it somehow.
they don't allow you to get insurance on it.
AT&T might not, but you can add it to your homeowners/renters policy or secure outside insurance from a third party (Safeware is one that I'm aware of). Mine is covered under my homeowner's insurance at a very low cost.
aite. but what do i do?
NotATreoFan said:
get it replaced by calling AT&T's handset repair department (800-801-1101, I think) and just lie to them.....As long as I was careful with how I worded it, I got a new phone each time.
Click to expand...
Click to collapse
the phone dosent really looked banged up on anything. what should i tell them. i really wanna get out of this not paying a thing...i paid to much for this phone.
benchMarc said:
My screen was cracked after 4 days of having it :')
It was inside my pocket without any further protection and i walked against something. Did cost me 136 euro to fix the screen.
Click to expand...
Click to collapse
where did you get yous fixed?
You go buy a replacement or get the screen fixed. They're not going to believe that you didn't break it yourself. I believe PocketPC Techs advertises that they can fix the screen.
http://auction1.taobao.com/auction/0/item_detail-0db1-0d15896736f242ad61bedaefd7d48e58.jhtml
This is an auction site like ebay in China. Buy it now price is 400 RMB. equals $55 approx.
http://auction1.taobao.com/auction/0/item_detail-0db1-0d15896736f242ad61bedaefd7d48e58.jhtml
This is an auction site like ebay in China. Buy it now price is 400 RMB. equals $55 approx.
I cracked my screen just s few days after getting it. I just repaired it this morning.
Contact njbridges here on the forum, or go to www.phoneystore.com and order the LCD from him. You have to get the whole LCD, as the digitizer portion is not available as a separate component. It cost me $120 + shipping to the US. He even included all the tools you need to make the repair. It literally took me 15 minutes to do. There are 4 torx screws under the display to remove, and then you use the separator tool that is included to remove the top housing. Once you've done that, unplug the LCD, slide it out, slide the new one in, reconnect the LCD, reassemble the top plastics, replace the screws, power back on, and you're done.
It's really simple to do. Why pay someone else to do it (especially if you're given the correct tools for the job).
Regards,
Jeff
Send it to at&t just don't tell them that the screen is broken tell them that it doesn't turn on, it worked for me and my 8125.
NappyBoy001 said:
Dropped my phone and the screen is all inked up NOW!
I purchased the phone about a month and a half ago...
the screen is the only thing thats messed up...it still made sounds and stuff like normal.
WHAT SHOULD I DO"?
Im so confused.
Click to expand...
Click to collapse
Me, too.
I just got back from Panama City, Panama where I was without my screen for a week. I talked on my phone while leaving the mall, put it in my pocket and pulled it out 15 minutes later after getting out of a taxi and the screen was broken. I'll be calling AT&T as this is my business' corp account. I had insurance on my Treo and my 8125, but think I may have dropped it on this one.
It does suck. The phone was three weeks old. I've gone back to my 8125 that's gone through hell and back without any problems....
I've got my fingers crossed or else I'll just order the screen myself.
Joe
www.jozle.com
http://www.phoneystore.com/product.asp?id=114327
See someone else posted this sight above also. I believe this will be the lest expensive way to go.
trick420 said:
I cracked my screen just s few days after getting it. I just repaired it this morning.
Contact njbridges here on the forum, or go to www.phoneystore.com and order the LCD from him. You have to get the whole LCD, as the digitizer portion is not available as a separate component. It cost me $120 + shipping to the US. He even included all the tools you need to make the repair. It literally took me 15 minutes to do. There are 4 torx screws under the display to remove, and then you use the separator tool that is included to remove the top housing. Once you've done that, unplug the LCD, slide it out, slide the new one in, reconnect the LCD, reassemble the top plastics, replace the screws, power back on, and you're done.
It's really simple to do. Why pay someone else to do it (especially if you're given the correct tools for the job).
Regards,
Jeff
Click to expand...
Click to collapse
thanx man,
NappyBoy001 said:
thanx man,
Click to expand...
Click to collapse
Any time. One thing to note, putting the outer plastic cover back on is a little bit of a bear - it's a tight fit. you will need to put some serious pressure on the housings to snap them together. It's especially difficult on the power button side of the phone. I used a small flat screwdriver between the top and the keyboard to support the carrier plastics on the top and then used thumb pressure to snap the top plastic to the carrier.
Jeff
As someone who has been through quite a few exchanges with Cingular (none since AT&T officially took over), and as a former employee of a Cingular warranty service provider, I can tell you that they do cover screen damage under very specific circumstances.
When going through the process on the phone, they will ask you basic questions like:
"Is there a pink strip under the battery?" - Indicates water damage
"Was the phone ever dropped from a distance greater than 2 feet?" - This is the important question for screen damage. Damage sustained from drops of 18 inches or less are covered.
It is a reasonable assumption that a cell phone, which is handheld most of the time, will be dropped on occasion.
The biggest question is whether or not the phone shows signs of "physical abuse". If you can answer no to that, then you should have no problem getting your phone exchanged.
Hello all, while drunk at the beach this weekend I accidentally went into the water with my Touch Diamond in my pocket... stupid... I know, did I mention I was drunk? Anyways, the current issue at hand is what to do with my screwed up cell phone.
I took the backing, battery and SIM card out of the phone and let it dry out as much as I could since the weekend. When I turned it on this morning, the "smart mobility" text appears for a few seconds, but the phone shuts off shortly after that. Do batteries usually break from water damage, as well?
If anyone has any advice for me I would greatly appreciate it. Does anyone know of a legit place that can repair this? Is there anything I can do to try and remedy this problem? Or would you recommend I just sell/ditch this one and get a new phone? Thanks a lot.
Have you tried charging the battery? that might explain it only booting for a second, the other explanation is that it's fried the ROM chips and only the bootloader works.
It's not looking good, is it under warranty?
Disassemble your Diamond completely (manual floating around somewhere in this forum), clean all pieces using one of these isopropanol-brush-thingies, reassemble, turn it on - and pray. Any year - a new battery might be a good idea. No promises on anything of that though. The diamond is a very integrated piece of technology and you might have short-circuited something on one of the PCBs really. No guarantee that everything will work as usual even if the device comes up as well.
Warranty seems to be out of the question - I guess virtually any repair center will notice residue of loads of salt water on the first look inside...
That's true, I meant to say insurance, heh.
Strip it down Salt water is very and I mean very corrosive ! You have nothing to lose and everything to gain by doing this . Waranty repair will be expensive.
Clean with an alchol based cleaner as advised but you must ensure you get all the salt out. To see it boot means that the screen has survived ( Amazed by this ) .
Best of luck , oh and if it does not work are you insured for accidental damage on personal items on your household insurance. This could be the next route
I have the same problem with my Tytn 2. It got wet during the "Oranje" Party in Basel, when the firemen were "cooling" down the fans...
It boots..but as soon as it has booted, you here a lot of "bling..bling..bling.." and it shuts down.. the batterie doesn't charge..
You recommend to open and clean it with alcool? Actually I'm not sure if it was washed by the firemen or by my own alcool .ehhehe..
I have a Diamond now, but if I get it back to work, I would sell it on ebay.
Regards
dajudge01 said:
Warranty seems to be out of the question - I guess virtually any repair center will notice residue of loads of salt water on the first look inside...
Click to expand...
Click to collapse
There is a watersensor inside the diamond. They'll notice that the device has been in the water.
wardy said:
Strip it down Salt water is very and I mean very corrosive ! You have nothing to lose and everything to gain by doing this . Waranty repair will be expensive.
Clean with an alchol based cleaner as advised but you must ensure you get all the salt out. To see it boot means that the screen has survived ( Amazed by this ) .
Best of luck , oh and if it does not work are you insured for accidental damage on personal items on your household insurance. This could be the next route
Click to expand...
Click to collapse
Luckily I was at lake Michigan in Chicago (fresh water), for whatever that's worth, so I'm not really worried about salt corroding anything away. I bought it off eBay unlocked, I did buy insurance but, naturally, I'm pretty sure that this water damage won't be covered.
Sounds like taking it apart and cleaning it might be my best bet. Do you guys think that any cell phone repair place would be able to help me out? Anyone know of a good cell phone repair shop (in the U.S.)? Thanks for the help thus far guys, I really appreciate it
Firstly remove the battery and SIM, please do not try to power up or charge again as you might have already damaged it beyond repair.
Isopropanol or IPA is what you need (100% Alcohol), you can get this from your local chemist for about £5 a bottle.
You need to strip your phone down completely and use an anti static PCB brush to clean the whole lot (Buy it from Maplin), submerge it in a plate of IPA (excluding the screen) while cleaning. As for the warranty sticker remove this by first heating with a hair drier, then uing a Stanley knife point to remove it.
Once it’s all been cleaned and dried in air, re-assemble and power up. If it fails to work take it back for a warranty replacement. As the warranty sticker is intact, and all the evidence of water damage will have been removed, they should replace it for you without a problem.
nairb011 said:
Luckily I was at lake Michigan in Chicago (fresh water), for whatever that's worth, so I'm not really worried about salt corroding anything away. I bought it off eBay unlocked, I did buy insurance but, naturally, I'm pretty sure that this water damage won't be covered.
Sounds like taking it apart and cleaning it might be my best bet. Do you guys think that any cell phone repair place would be able to help me out? Anyone know of a good cell phone repair shop (in the U.S.)? Thanks for the help thus far guys, I really appreciate it
Click to expand...
Click to collapse
Pretty sure? I would check if I was you before doing anything else with it. If insurance doesnt cover water damage, what does it cover? Phone insurance is so expensive i thought they covered everything like theft and accidental damage, I thought the idea was a warranty wont cover you if you break the phone but insurance will.
I'm thinking it may be an idea to check before you do anything else so they dont say "Well we cover water damage, but now youve taken apart the phone we cant cover you"
Antimus said:
Have you tried charging the battery? that might explain it only booting for a second, the other explanation is that it's fried the ROM chips and only the bootloader works.
It's not looking good, is it under warranty?
Click to expand...
Click to collapse
Seriously you are not hoping warranty will cover "swimming with the diamond"...
imranbashir_uk said:
all the evidence of water damage will have been removed, they should replace it for you without a problem.
Click to expand...
Click to collapse
All the evidence, that is, apart from the water-sensitive tab which I am assuming you didn't know about...? (behind the tab for attaching a strap)
Mathew
webmice said:
Seriously you are not hoping warranty will cover "swimming with the diamond"...
Click to expand...
Click to collapse
or doese he mean "Swimming Diamond" ... Is that a new feature we overlocked? I think it's time for another entry in the tweaklist... *rofl*
My warranty does not cover accidental water damage, that is for sure.
I charged the battery up over the weekend and tried turning it back on, and, to my utter amazement, the phone completely powered on. I got to all of my menus and was able to use all of the programs that I opened, even the WiFi worked.
However, the functionality of the touch screen is quite screwed up. I don't know if its shorting out or what but there are basically "ghost taps" and other unintentional actions happening all the time. For example, if I were to just leave it at the home screen it would eventually scroll to another menu, open the start pull-down menu, automatically open the calendar and start doing random ****, etc.
Does anyone know how to fix the touch screen or have any ideas on how to replace one? I have a faint hope that this thing might not be beyond saving.. thanks a lot people
nairb011 said:
Does anyone know how to fix the touch screen or have any ideas on how to replace one? I have a faint hope that this thing might not be beyond saving.. thanks a lot people
Click to expand...
Click to collapse
Maybe try to re-calibrate the touch screen?
Don't give up hope, sometimes these things can take days, even weeks to fully dry and become functional. My mom had a sony ericsson somethingorother that she loved, dropped in the tub, didn't work for like a month or more... She'd check it every week or so to see, and slowly the features started coming back... Little by little, more and more buttons would respond (without activating 2 or 3 at a time). Well, long story short (too late?) works 100% now. I don't think water damage is a reparable occurrence, but DON'T sell your Diamond for parts or anything like that, keep it around and check back periodically. Best of luck.
there is a little white sticker onto the battery.
If it goes RED it shows HTC that the Phone/Battery went into the water.
This allows HTC to avoid repair "sunk" phones
deuillevent said:
there is a little white sticker onto the battery.
If it goes RED it shows HTC that the Phone/Battery went into the water.
This allows HTC to avoid repair "sunk" phones
Click to expand...
Click to collapse
Should also be one on the phone... If not, there's your solution. New battery + deny any water damage = Free replacement.
Black93300ZX said:
Should also be one on the phone... If not, there's your solution. New battery + deny any water damage = Free replacement.
Click to expand...
Click to collapse
See post #12
Haha you're all over it... Yeah, I had a feeling they'd have something in the phone, they'd never make it THAT easy.
I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks
well i don't know if warranty will cover it or not but you are still under your one year warranty so you could try to get a replacement. Its hard to say what could be causing it. You can check out mike channon's articles on disassembling a kaiser.
Good luck.
brianlb said:
I'm assuming I smashed my At&t tilt or something, there is no cracks on the screen or anything, but the pic below shows the display I get. I'll have the phone for about a year in about 2 weeks. Anyone have an idea as to how much At&t or HTC will charge to fix this or am I better off buying a new phone? Or any ideas as to what could be broken and how it can be fixed? It doesn't allow me to do a hard reset. Thanks
Click to expand...
Click to collapse
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya
pyraxiate said:
Well to my trained eye, it looks as though you have actually cracked the lcd screen. This damage isnt generally covered by any manufacturers standard warranty. Unless you purchased an extra warranty including accidental damage, I think its up to you to repair yourself unless you want to spend 400USD + for the repair. Taking it apart isnt terribly difficult and I have seen links to lcd screens posted all over for no more than 100USD. Check Ebay also.
http://cgi.ebay.com/LCD-Replacemet-...39:1|66:2|65:12|240:1318&_trksid=p3286.c0.m14
Here is one for 45 USD
Hope this helps ya
Click to expand...
Click to collapse
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?
This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.
I did a screen replacement on a Wizard, and it wasn't that difficult. just make sure you don't break anything while trying to pry small pieces off to get to the screen.
Stu_Can_Sam said:
This raises a great question for me. i work in a clean room/static sensative environment and repair and calibrate many different types of electronics (mostly signal generators & spectrum analyzers). I was wondering if anyone here has actually attempted to replace a LCD screen with success. And if so, how complicated the process was. I have downloaded the schematical drawings and have found replacement parts for the kaiser online for extremely cheap. i will post the site as soon as i find it again.
Click to expand...
Click to collapse
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.
brianlb said:
I don't see a crack in the screen. Can there still be a crack in it that isn't visible or not noticeable until you take it apart? If that's the case I'll either buy a new screen or just buy a new phone on ebay for 200bux. Also anyone have any recommended sites on how to replace the screen?
Click to expand...
Click to collapse
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !
pyraxiate said:
Generally you will NOT see a physical crack on the surface. The surface is actually JUST a digitizer ( a separate piece which is built into or ontop of your LCD for input purposes ). The digitizer is basically your touch screen portion of the LCD. What is actually cracked is the thin film below that which contains all of the liquid crystals.
As far as the replacement goes, I believe it is Michael Channon who has the step by step instructions on how to disassemble and replace the LCD. It isnt a hard task from what I can tell. I had taken my hermes ( Tytan ) apart so many times that i could do it in my sleep. Its not a terribly difficult process.
Here is Michaels Guide
Its not in English but its not hard to follow the pictures. He has done a great job at documenting the procedure.
If you are a bit scared to try it yourself, have a geeky friend do it for you ( maybe get him a date to a movie or something lol )
It should only cost you no more than 50$USD to repair ( Minus the bribe for a date lol )
Hope this helps you out !
Click to expand...
Click to collapse
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$
brianlb said:
Thx, I'm gonna give it a shot. I went ahead and bought the screen off ebay from the post by pyraxiate. Worst case I mess it up and buy a new phone of ebay for 150-200, which is what I originally thought I'd have to do, so this at least gives me a chance to save some $$$
Click to expand...
Click to collapse
Let us know how it goes
Glad I could help
Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.
congratulations!
good to hear you've achieved a successful repair!
correct me if i'm wrong...are you saying that the two halves of the phone (screen and keyboard) don't align properly when the keyboard is closed? if so, i remember a thread in this section of the kaiser forums that details (with pictures) how to possibly fix that particular problem!!!
"search and ye shall foundeth it !!!"
brianlb said:
Got it all done, actually my pops did it. Works great, he took it apart just like the Mike Channon pics show, don't know if you had to do all of it or not just to replace the screen, but he did. Only one little annoying thing now that it's back together is that a small part of the black plastic out case hangs out just a tab and isn't flush, which makes it a little annoying when hitting the power/standby button on the right side of the phone. But I can learn to live with that I think. thanks for all the help.
Click to expand...
Click to collapse
Im glad i could help Im also glad to hear the phone is up and running again
As was stated before, there is a thread for the case not aligning. I did some quick looking but to no avail. If i come across it ill be sure to post it
I'm not sure if I'm explaining it correctly. But it's basically the outer case, and around the power button it's not flush. Not sure if you can tell from my pics. I tried also doing a search w/no luck. I'm sure there is some specific name or something other than case that it's under.
When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...
DemoShadow said:
When i replaced my faceplate i had the same problem. all i did was push it in...kinda hard, and it poped in, or you could use a plasic flathead and pop it back in...
Click to expand...
Click to collapse
I tried that, and it doesn't seem to pop in at all.
I think its just like DemoShadow said. I dropped mine once and it seems to be a similar issue. I also just pushed really hard to get it to pop back in. I think its just that clip isnt in place as it should be when it was put back together. If anything, try to take it apart and put it back together
kristoff_sz said:
ITs easy as hell.
I've done it two times with success.
Its only matter of two connection belts and thats all at all .
Screen replacement is really easy here.
Click to expand...
Click to collapse
how did you put the keyboard back on????????????????
Can you be more specific?
Hey,
I literally just replaced the screen on my backup Tilt last night. Still got most of it in my head.
What, exactly, do you mean about putting the keyboard back on? Got any pics of where you are now?
This was one of the easiest things I've had to do...asside from it being somewhat tedious. Most of my issues were resolved by MAGNIFICATION! Once I could see what I was doing, there were almost no issues.
I only paid $31.99 on eBay for a screen with free shipping (from USA no less)...less than the $35 I would have had to pay with the insurance through my Provider Dealer...and I didn't have to wait for 3-5 weeks to get it back.
I'd do this for people with broken screens as a service, but I can't guarantee the cost of the screen...it goes up and down too much.
If you can be real descriptive, or have pictures, I'm pretty sure I can help get you back together.
Let me know, I'll keep an eye on this thread...
RAF
here's some dismantling guides
http://www.mikechannon.net/page1.html
you dont have to remove the keyboard to replace the LCD, unless u're talking about the outer keypad, which just sits in its spot
I noticed a problem with my Diamond today - the clear plastic covering the main button has started to peel at one edge (see pic). I've written to HTC to see if they'll repair it under warranty. Anyone else had this?
Crikey - fast reply from HTC:
"Good Afternoon, Essentially, we do cover your device under your warranty for paint peeling. If you call us on our technical support line, one of my collegues would be happy to book your device in for a repair and evaluation. Please can you call: 08458900079 Kind Regards, HTC Europe"
Full marks so far!
R
It was all going so well.... until...
I called the number and explained the issue to the lady on the phone. She told me categorically that this 'plastic refurbishment' is not covered under the warranty - I presume she knew what I was talking about although I could hardly understand a word she said. I explained that the email suggested it was covered. So, she asked me to go back to the email response and tell them what she said.
How annoying - firstly that you get two responses from one company and secondly that they reply on you to communicate between them. One is not impressed!
I have emailed HTC back with the news...
R
Hmm I have the exact same issue with my diamond. Almost 9 months old and I too have the problem off the plastiv letting go just above the home button. Well 1 month to go and I can get me a touch diamond 2 if it is released one month that is.
Now I get this:
Now essentially the HTC Touch Diamond has no known issues with paint peeling. As i did specify in my last e-mail, we can evaluate the device however if our repair center deem this to be caused by general wear and tear this would not be covered under your device warranty. I must also advise that if a quotation is raised due to an out of warranty repair there is a £20 charge to release the telephone back to you. With all that information in mind, would you still want to get this device evaluated?
So, I can pay £20 and be without my phone for 2 weeks in the hope that it *might* be covered. A bit annoyed at this - it is wear to the item but I count this wear to be within reasonable use and that the keys should be fit for purpose.....
R
My reply:
Hi, I think this is quite unfair. Essentially you are saying that I can send my phone in and hope you will see fit to cover it - but this is a risk, and if you presume it to be acceptable wear I will have to pay £20 have my phone released.
I know of others on internet forums who are also having this problem so I am not alone.
In my view, although this is 'wear' to the item it is within reasonable fair usage for the product. In other words the covering to the button is not fit for purpose in this case.
I am not prepared to risk £20 and be without my phone for 2 weeks whilst you decide if this is coverable or not - I have sent you a picture of the problem which clearly demonstrates the fault. The fault is obviously a lifting of the button covering that has occured during normal and acceptable use.
Please talk to your repair team and let me know if I will be covered or not.
Tell them that on other countries (in poland, im sure of) your issue is a 100% covered by warranty. As Poland HTC Support is in GB, and i assume its the same office they answer europe calls.
I know more than 5 people that had given their Diamonds for fix this issue without any cost.
I had the same problem.. I just peeled it off and ordered a screen protector+the bottom part for the keypad and just replaced it.. I didnt want to go through all the trouble. It worked out for me.
mmmhhh86 said:
I had the same problem.. I just peeled it off and ordered a screen protector+the bottom part for the keypad and just replaced it.. I didnt want to go through all the trouble. It worked out for me.
Click to expand...
Click to collapse
hey i remember you gave me the eBay sellers name, for the same one you purchased, but i couldnt find the item that has both screen protector, AND the button protector =/ you lucked out man!
I dont know if i wanna buy it from the seller located in Hong Kong! I just want the one that feels exactly the same as the one that comes with the Diamond
Had exactly the same problem back in January, I just peeled it off. Now the button area is getting quite scratched up and I'd love to get a replacement. I've not found anything on Expansys or elsewhere that's similar.
Cheers
Dave
OK - maybe I have the wrong idea about this. I thought the top layer was an intricate part of the button itself. The above posts seem to suggest it is merely a protective cover that can be easily removed and (if you can find the part) replaced? Is this correct?
R
Yes you can just peal it of, it does take some pealing so take care.
So, once you have peeled it off - what is underneath? Clear plastic? Sticky stuff? Can you rub the button decals off if you do not re-cover it?
R
Malik05 said:
hey i remember you gave me the eBay sellers name, for the same one you purchased, but i couldnt find the item that has both screen protector, AND the button protector =/ you lucked out man!
I dont know if i wanna buy it from the seller located in Hong Kong! I just want the one that feels exactly the same as the one that comes with the Diamond
Click to expand...
Click to collapse
Hey.. Yeah I remember giving you the link.. The seller had stock at the time you should have acted fast.. I cant find any seller who sells both pieces except in hong kong:S
Keep trying you might find something soon.
Answer to other questions: Yes you can peel it off. There will be some minor glue residues which you can take off and the decals will not be scratched off. I would replace it immediately though. Remember this is not the perfect solution but it is a fast and easier solution than dealing with HTC.. My opinion anyway. Good luck.
I have the same problem and in the same spot, im here in Australia and when i got fone only Telstra sold them.
I can not get it covered under warrenty.
it sucks.
Exact same problem here at the same corner too.
My initial solution has been to carefully slice off the lifted flap with a sharp knife to stop it ctaching my pocket and coming off further. Be careful of you do this though as you could damage other areas with the knife. I used a thin sharp blade held flat on the face of the phone and gently sliced through the flap from the outer edge.
Same problem here, left corner peeled off, so I peeled the whole cover off, and since I recognised that it gets scratches easily I covered it with a transparent sticker. But I already ordered new navi buttons, just don't know how to replace it...I'll see...
thanks for a useful thread. i had the same problem and just peeled it off. i'll start looking for new protection and post if i find anything
Hi! for couple of weeks my X1 is driving me nuts. When I try to charge it turns off for example! also it's very slow and doesn't matter what ROM I use! :/ Customer Service says it's my fault (didn't say I've got custom roms) and they can't do nothing until it will be dead.... so how can I break it but make sure service won't say that I destroyed it? maybe stress the cpu or overclock it? or maybe any other ideas? I know it's stupid but I'm really angry on it. I'm sorry if I'm breaking any forum rules
All the comments got deleted? :S
A single action or a combination of these will help your problem
Throw is against a wall, place c4 on it, throw it off a buliding, place in volcano, shoot with a .50 sniper, blend it. All of these should kill it.
Or you could do this
http://lmgtfy.com/?q=how+to+kill+phone+for+warrenty
and chnage the search to your preference.
eurosport360 said:
A single action or a combination of these will help your problem
Throw is against a wall, place c4 on it, throw it off a buliding, place in volcano, shoot with a .50 sniper, blend it. All of these should kill it.
Or you could do this
http://lmgtfy.com/?q=how+to+kill+phone+for+warrenty
and chnage the search to your preference.
Click to expand...
Click to collapse
this thread is in the top 5 of that search twice >.<
i stand by my microwave idea
I would not do anything to deliberately destroy your phone since SE will probably discover it. You say your phone is still within its warranty time frame. So I recommend making a list containing all errors. Has your phone got any cracks in the case? Is the optical pad loose? Problems with the screen? Together with the fact that your device turns itself off during the charging process it should be enough to get a replacement under warranty.
I did the same with my phone which suffered from a pixel failure (generally not covered by warranty), a loose optical pad, a crack in the case and the fact that the black paint of the battery cover had come off. Now I got a replacement which is in perfect condition and it did not cost me anything.
My xperia just broke because of the screen ribbon cable, it seems that I used the hw keyboard too much. I guess if you really want to go rma, just switch to landscape too much