[Q] help with bricked lg thrill - LG Thrill 4G

so i was getting ready to sell my old thril when i did a factory reset from the phone os.. then realized how stupid i was.. i had forgot that i had it rooted and twrp recovery flashed of course i had already wiped the memory card and so yeah not the phone boots into recovery and thats it and i have no backups of how it was before. what do i need to do and where can i download what i need to flash it back to stock ics?

duhjuh said:
so i was getting ready to sell my old thril when i did a factory reset from the phone os.. then realized how stupid i was.. i had forgot that i had it rooted and twrp recovery flashed of course i had already wiped the memory card and so yeah not the phone boots into recovery and thats it and i have no backups of how it was before. what do i need to do and where can i download what i need to flash it back to stock ics?
Click to expand...
Click to collapse
boots to unlocked bootloader then to teamwin and thats it nothing else

You maybe lost the partticion,you have to flash again with LG Flash tool..
Sent from my T-Mobile myTouch Q using xda app-developers app

How to flash with LG Flash Tool:
http://forum.xda-developers.com/showthread.php?p=39269819

what about stock?
drastic00 said:
How to flash with LG Flash Tool:
http://forum.xda-developers.com/showthread.php?p=39269819
Click to expand...
Click to collapse
yes but i dont want xbsa
i want rooted stock att ics
currently the phone can boot to twrp so i can recover from there if need be.
(this phone will just be used to play games and watch movies and probably as a vlc remote so i want to keep the 3d features)

You do not have to install XBSA ROM; just install the rooted ICS and you are done. Or find v30B firmware to flash (US ATT).

links?
drastic00 said:
You do not have to install XBSA ROM; just install the rooted ICS and you are done. Or find v30B firmware to flash (US ATT).
Click to expand...
Click to collapse
links?

Look in Thrill dev section

I should have said General section maybe.

bricked
hi,i tried using swapper,apartd,link2sd all together and now my phone dosent boot unless i use the ics root fastboot,both when it boots its stuck at lg logo and i cant get it to last long enough in download mode to flash a new kdz..plss help am phoneless
---------- Post added at 10:24 PM ---------- Previous post was at 10:18 PM ----------
kkins95 said:
hi,i tried using swapper,apartd,link2sd all together and now my phone dosent boot unless i use the ics root fastboot,both when it boots its stuck at lg logo and i cant get it to last long enough in download mode to flash a new kdz..plss help am phoneless
Click to expand...
Click to collapse
when i go into the root fastboot it says partition does not exists

Related

phone stuck on lg logo but can install the rom

hi i have a lg optimus 2x korea and i cant boot into custom rom.i installed cwm recovery and clear cache, data and successfully installed my custom rom but when i rebooted the phone i was stuck with the lg logo.can someone fix this.thanks also i forgot to backup.so how is their a method to return to stock
Try wiping everything and flashing ROM again. Give it a 2nd chance. Else you can download another ROM (in pc etc), put it in micro sdcard and flash it.
You can go to stock by using smartflash(search in Development section), but believe me its more pain n the ass to do that!! besides you lose you root and recovery too.
fufu38 said:
hi i have a lg optimus 2x korea and i cant boot into custom rom.i installed cwm recovery and clear cache, data and successfully installed my custom rom but when i rebooted the phone i was stuck with the lg logo.can someone fix this.thanks also i forgot to backup.so how is their a method to return to stock
Click to expand...
Click to collapse
Use LG update tool to update to the latest country ROM and then you can get back root, custom ROM and so on....best always is the LG update tool which wipes all in a safe and best way
Try and try as I might, I can't get the LG software to recognize the phone no matter what I do.
SREEPRAJAY said:
Use LG update tool to update to the latest country ROM and then you can get back root, custom ROM and so on....best always is the LG update tool which wipes all in a safe and best way
Click to expand...
Click to collapse
You can always go back to stock by downloading the stock rom here http://forum.xda-developers.com/showthread.php?t=1035041, all you need is there, just follow the instruction..
U should flash backtoext3.zip then flash the rom
sent from my monster:the lg optimus 2x using xda
unable to install stock rom
DEAR MEMBERS
please help me i am running cm7.2 in my o2x and want to go back to stock rom.
i have downloaded smartflash tool and stock rom fls and bin files and done the entire procedure as mentioned in the guide
but when i press start button it asks to install odm which is not mentioned in the steps.
when i press yes nothing happens when i press no nothing happens.
please help me to get back to stock rom or else i may void my warranty.
once before i installed the stock rom by the procedure and was successful but this time i am unable
working
aziz.chamadia said:
DEAR MEMBERS
please help me i am running cm7.2 in my o2x and want to go back to stock rom.
i have downloaded smartflash tool and stock rom fls and bin files and done the entire procedure as mentioned in the guide
but when i press start button it asks to install odm which is not mentioned in the steps.
when i press yes nothing happens when i press no nothing happens.
please help me to get back to stock rom or else i may void my warranty.
once before i installed the stock rom by the procedure and was successful but this time i am unable
Click to expand...
Click to collapse
u should first install the latest mobile drivers again after uninstalling the older one then try it...maybe it helps u
---------- Post added at 06:02 PM ---------- Previous post was at 05:49 PM ----------
fufu38 said:
hi i have a lg optimus 2x korea and i cant boot into custom rom.i installed cwm recovery and clear cache, data and successfully installed my custom rom but when i rebooted the phone i was stuck with the lg logo.can someone fix this.thanks also i forgot to backup.so how is their a method to return to stock
Click to expand...
Click to collapse
http://forum.xda-developers.com/show....php?t=1035041
in this link all orignal roms are there and installing method....

[Q] LG SECURITY ERROR - Bootloop on Optimus Black

I had rooted my Optimus Black right from the first week i had bought in May 2012. Tried all the possible custom ROM's out there. Huexx's Zeus ROM was my favourite. But due to power problems (abrupt restarts and excessive heating during charging) I had to give my Black to service center for repair. I made sure that I switched back to stock ROM before I give it back to the service center.
Since then, I have been unable to ROOT it !!
Tried all the possible methods to root it:
CWM Injection, Smartflash resulted into BOOTLOOP's when i tried to flash older V10 and V20 firmwares. Only firmwares that worked were V20 F and V20 G.
This got me really frustrated as I just couldnt ROOT IT.
Today I flashed European V30 with the intention of ROOTING it with Unlockroot.
This time i was successful in ROOTING.
I installed Rom Manager, Flashed CLockwordmod Recovery. Rebooted into recovery and was greeted with a "LG Security Error" !!!! The phone just wont start.
What is going on ?? Is my bootloader locked ?? I dont know ??
Can someone please help me ??
Official ICS has bootloader locked.
lg putted a "crc check" on the bootloader so if its modified like your case, it gives a security error
rrgrrg said:
lg putted a "crc check" on the bootloader so if its modified like your case, it gives a security error
Click to expand...
Click to collapse
Does that mean I am stuck on STOCK firmware from now on ?? This sucks.
I also came across things like for the Optimus G and Nitro.
Cant anything be done regarding this matter for the Black ?
Removing the very essence of andriod OS by LG by resorting to such stupidity really DISGUSTS me.
Please Dev's, come up with something. STOCK LG roms suck ass.
yes you cannot have cwm with that rom (atleast this easy)
flash another rom with smartflashtool
Download THIS and use THIS tutorial .. you`ll get Gingerbread rooted. After this install rom manager and you can install custom rom.
stefan2012 said:
Download THIS and use THIS tutorial .. you`ll get Gingerbread rooted. After this install rom manager and you can install custom rom.
Click to expand...
Click to collapse
Tried it but FAILED.
STUCK on LG logo with the bottom lights blinking. Waited for more than 10 mins but just stuck there.
As I had mentioned earlier, can boot successfully through only stock firmwares like V20 F, V20 G and V30. Cannot flash patched roms and neither can I flash old V10 firmware as it results in BOOTLOOP.
:crying:
Help Me !
pawan182 said:
Tried it but FAILED.
STUCK on LG logo with the bottom lights blinking. Waited for more than 10 mins but just stuck there.
As I had mentioned earlier, can boot successfully through only stock firmwares like V20 F, V20 G and V30. Cannot flash patched roms and neither can I flash old V10 firmware as it results in BOOTLOOP.
:crying:
Help Me !
Click to expand...
Click to collapse
i got this security error last week
when i tried to change rom FROM V30b to Jelly bam.
I solve my problem by using SMART FLASH...
flash v20g with recovery.
then make a fresh install of jelly bam.
And it works.
Hope it helps u.
Just remember to do a full wipe.
panda_linger said:
i got this security error last week
when i tried to change rom FROM V30b to Jelly bam.
I solve my problem by using SMART FLASH...
flash v20g with recovery.
then make a fresh install of jelly bam.
And it works.
Hope it helps u.
Just remember to do a full wipe.
Click to expand...
Click to collapse
I cannot boot through a patched firmware. Just wont start.
But I want to give your Patched V20 G a shot.
Can u please give me the download link of your Patched V20G ?
pawan182 said:
I cannot boot through a patched firmware. Just wont start.
But I want to give your Patched V20 G a shot.
Can u please give me the download link of your Patched V20G ?
Click to expand...
Click to collapse
Try this website for Firmware http://lg-phone-firmware.com/index.php?id_mod=1
My V20g might not suit you as im from asia.
You see which firmware suit you most.
I think NOOBY guide can solve your problem.
Just follow the steps he provided
http://forum.xda-developers.com/showthread.php?t=1487105
pawan182 said:
I cannot boot through a patched firmware. Just wont start.
But I want to give your Patched V20 G a shot.
Can u please give me the download link of your Patched V20G ?
Click to expand...
Click to collapse
it didnt boot to CWM? just a direct bootloop after flashing with SFT?
re4lsk said:
it didnt boot to CWM? just a direct bootloop after flashing with SFT?
Click to expand...
Click to collapse
A lot of people flash a patched V20 and they forget to flash the Superuser and that results in a bootloop.At least it happened to me when I first rooted my OB in ancient times.Maybe this is the case.
P.S.:Got some tacos today?
Edvin73 said:
A lot of people flash a patched V20 and they forget to flash the Superuser and that results in a bootloop.At least it happened to me when I first rooted my OB in ancient times.Maybe this is the case.
P.S.:Got some tacos today?
Click to expand...
Click to collapse
thats why i was asking if it booted to CWM.
PS no hay tacos hoy.
re4lsk said:
it didnt boot to CWM? just a direct bootloop after flashing with SFT?
Click to expand...
Click to collapse
EXACTLY !!
IT WONT BOOT AFTER FLASHING PATCHED FIRMWARE. STUCK ON LG logo with blinking bottom lights (strange but true).
Tried Rom Converter 2 and 2.1, Injection Method, everything.
Patched V20S, V20O does not work.
also CANNOT boot succesfully throuh a Stock V10 (so that it becomes easy to root).
panda_linger said:
Try this website for Firmware http://lg-phone-firmware.com/index.php?id_mod=1
My V20g might not suit you as im from asia.
You see which firmware suit you most.
I think NOOBY guide can solve your problem.
Just follow the steps he provided
http://forum.xda-developers.com/showthread.php?t=1487105
Click to expand...
Click to collapse
I have tried all possible methods in the above links. Does NOT work. It wont boot through a patched firmware. Seems like LG has put some sort of a LOCK for the BOOTLOADER. Only STOCK V20G, V20F and V30 work.
There is another member with the same issue. Check this.
http://forum.xda-developers.com/showthread.php?p=35908714#post35908714
pawan182 said:
I have tried all possible methods in the above links. Does NOT work. It wont boot through a patched firmware. Seems like LG has put some sort of a LOCK for the BOOTLOADER. Only STOCK V20G, V20F and V30 work.
Click to expand...
Click to collapse
Did you start smartflash as admin? Disable anti virus program and firewall maybe?
Sent from my LG-P970 using xda app-developers app
Hi
This happens if you flash original v30b with smart flash and the only way to go back to GB is flash a patched v20 version....
And it directly first boots into CWM...now dont restart....just flash your backup from your memcard,this will bring your phone back alive....
You can try copy any other zip version in your memory card if u dont have backup....
The problem is original v30 formats the phone in some diff format.....
Flashing it back with CWM...brings it back alive....
If you already flashed patched version then u can try to enter CWM by console...adb reboot recovery......else do as mentioned above....
Sent from my LG-P970 using xda app-developers app
N00BY0815 said:
Did you start smartflash as admin? Disable anti virus program and firewall maybe?
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Yupp.. tried as admin and antivirus disabled. BOOTLOOP.
The service center guys did something to it. just cant get into CWM after i claimed a repair under warranty.
rajeshmk2012 said:
Hi
This happens if you flash original v30b with smart flash and the only way to go back to GB is flash a patched v20 version....
And it directly first boots into CWM...now dont restart....just flash your backup from your memcard,this will bring your phone back alive....
You can try copy any other zip version in your memory card if u dont have backup....
The problem is original v30 formats the phone in some diff format.....
Flashing it back with CWM...brings it back alive....
If you already flashed patched version then u can try to enter CWM by console...adb reboot recovery......else do as mentioned above....
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
I have mentioned it previously also. It does not boot into Recovery/CWM after flashing patched firmware using SFT. It gets STUCK on LG logo. Only stock firmwares work.

Help! Can't return to stock

Hey guys, any info on this would be great.
Have a ATT Note 3... It boots into recovery and Download mode..
Basically, I was going to install knoxraid, wiped /system /data, but didn't have the rom file to flash.
Then, rebooted phone, and it will go into stock recovery but not safestrap.
Please help... I know it can't be completely bricked.
I tried unbrick-soft-bricked-att-galaxy-note-3-sm-900a but it fails
(also, I am sure Samsung drivers are installed)
kuttor said:
Hey guys, any info on this would be great.
Have a ATT Note 3... It boots into recovery and Download mode..
Basically, I was going to install knoxraid, wiped /system /data, but didn't have the rom file to flash.
Then, rebooted phone, and it will go into stock recovery but not safestrap.
Please help... I know it can't be completely bricked.
I tried unbrick-soft-bricked-att-galaxy-note-3-sm-900a but it fails
(also, I am sure Samsung drivers are installed)
Click to expand...
Click to collapse
So you can't get the phone to boot normally? What happens when you try to let the phone boot up on it's on without trying to go into recovery or download mode?
Same thing happened to me once.. just took it to my nearest at&t and told them I was upgrading to kit Kat by computer thru kies and that my daughter unplugged my phone during its process and failed and they fixed it for me..free
Sent from my SAMSUNG-SM-N900A using xda app-developers app
kuttor said:
Hey guys, any info on this would be great.
Have a ATT Note 3... It boots into recovery and Download mode..
Basically, I was going to install knoxraid, wiped /system /data, but didn't have the rom file to flash.
Then, rebooted phone, and it will go into stock recovery but not safestrap.
Please help... I know it can't be completely bricked.
I tried unbrick-soft-bricked-att-galaxy-note-3-sm-900a but it fails
(also, I am sure Samsung drivers are installed)
Click to expand...
Click to collapse
I believe you are going to have to Odin back with the Odin JB files. Their is three of them. I see if I can find you more info as to what to do.
---------- Post added at 09:20 PM ---------- Previous post was at 09:06 PM ----------
kuttor said:
Hey guys, any info on this would be great.
Have a ATT Note 3... It boots into recovery and Download mode..
Basically, I was going to install knoxraid, wiped /system /data, but didn't have the rom file to flash.
Then, rebooted phone, and it will go into stock recovery but not safestrap.
Please help... I know it can't be completely bricked.
I tried unbrick-soft-bricked-att-galaxy-note-3-sm-900a but it fails
(also, I am sure Samsung drivers are installed)
Click to expand...
Click to collapse
Here is the like on how to get back to JB.
http://forum.xda-developers.com/showthread.php?t=2707555
htsl said:
I believe you are going to have to Odin back with the Odin JB files. Their is three of them. I see if I can find you more info as to what to do.
---------- Post added at 09:20 PM ---------- Previous post was at 09:06 PM ----------
Here is the like on how to get back to JB.
http://forum.xda-developers.com/showthread.php?t=2707555
Click to expand...
Click to collapse
That would work beautifully, but I don't have safe strap installed and can't get into a ROM...
Basically, I can get into download and stock recovery mode.
Ideas4ya said:
So you can't get the phone to boot normally? What happens when you try to let the phone boot up on it's on without trying to go into recovery or download mode?
Click to expand...
Click to collapse
Nope, I erased system and data... So, I can get into recovery and download mode.
Any help is hugely appreciated....if I could flash safe strap, it would be fine.
kuttor said:
Nope, I erased system and data... So, I can get into recovery and download mode.
Any help is hugely appreciated....if I could flash safe strap, it would be fine.
Click to expand...
Click to collapse
All your gonna have to do is Odin some JB files and your Safestrap should still be on their regardless of you erassing your system data.
---------- Post added at 11:34 PM ---------- Previous post was at 11:32 PM ----------
kuttor said:
Nope, I erased system and data... So, I can get into recovery and download mode.
Any help is hugely appreciated....if I could flash safe strap, it would be fine.
Click to expand...
Click to collapse
What version of SafeStrap did you have installed ? 3.7.1 or 3.7.2
Dude. Wait. If you wiped system you have no rom..All you have to do is use your computer and download a rom and push to your sd card. Then use stock or recovery to flash. Lol. I did this on my nexus once. Anyway it's simple fix.
Sent from my SAMSUNG-SM-N900A using xda app-developers app
kuttor said:
Nope, I erased system and data... So, I can get into recovery and download mode.
Any help is hugely appreciated....if I could flash safe strap, it would be fine.
Click to expand...
Click to collapse
I would say you could revert to MJ5 link http://forum.xda-developers.com/showthread.php?t=2559715. Read it to the T. This will put the MJ5 4.3 back on your phone. You don't need safestrap to revert back to MJ5 method. You can root and install safestrap back on when its installed. Just do steps 1-9 if you don't want to root this method. don't worry about this download link ( https://mega.co.nz/#F!icMTnSQY!bMBNFmUnn2_K8olSTYpwIA (mirror provided by drakeymcmb) i'ts just a mirror for the ml9 fix.image ext4.
YRC123 said:
I would say you could revert to MJ5 link http://forum.xda-developers.com/showthread.php?t=2559715. Read it to the T. This will put the MJ5 4.3 back on your phone. You don't need safestrap to revert back to MJ5 method. You can root and install safestrap back on when its installed. Just do steps 1-9 if you don't want to root this method. don't worry about this download link ( https://mega.co.nz/#F!icMTnSQY!bMBNFmUnn2_K8olSTYpwIA (mirror provided by drakeymcmb) i'ts just a mirror for the ml9 fix.image ext4.
Click to expand...
Click to collapse
Alright, I'll follow this eexact. I am not new to flashing and ROM mods. (Been doing it since the s2). I normally would push via ADB, use a custom recovery and be set. But, just picked up the note 2… and ADB wouldnt detect the phone to push ROM.. (Using ADB device). So, anyways.... I know I have to use ODIN. I know its not fubard because the phone boots into download and stock recovery mode.
Thanks everyone, I really want to get this fix. Luckily I have a nexus 5 as well.
kuttor said:
Alright, I'll follow this eexact. I am not new to flashing and ROM mods. (Been doing it since the s2). I normally would push via ADB, use a custom recovery and be set. But, just picked up the note 2… and ADB wouldnt detect the phone to push ROM.. (Using ADB device). So, anyways.... I know I have to use ODIN. I know its not fubard because the phone boots into download and stock recovery mode.
Thanks everyone, I really want to get this fix. Luckily I have a nexus 5 as well.
Click to expand...
Click to collapse
hold on do you have the note 2 or note 3
jerrycoffman45 said:
hold on do you have the note 2 or note 3
Click to expand...
Click to collapse
Note 3 -- sorry.
kuttor said:
Alright, I'll follow this eexact. I am not new to flashing and ROM mods. (Been doing it since the s2). I normally would push via ADB, use a custom recovery and be set. But, just picked up the note 2… and ADB wouldnt detect the phone to push ROM.. (Using ADB device). So, anyways.... I know I have to use ODIN. I know its not fubard because the phone boots into download and stock recovery mode.
Thanks everyone, I really want to get this fix. Luckily I have a nexus 5 as well.
Click to expand...
Click to collapse
We can't use the old way to get into our or past our bootloaders. If you follow everything on revert to MJ5 steps 1-9 that should give you bootable verse of MJ5 4.3. If you still want root and stay on MJ5 ok. If you want the next software fix then don't root yet then try to get the NB4 patch then you can root with Kingo 1.18.

[Q] Not able to install custom recovery in Xperai SP 4.3 .205 Root & BL unlocked

Hi,
I am using Xperia SP, C5302, with Android version: 4.3 and Firmware: 12.1.A.205. I want to install CyanogenMod 11 in my mobile.
Going though different tips and tricks, I was able to root my phone, as well as unlock the bootloader. However, I'm unable to install a custom recovery. It is advised everywhere not to proceed with installing any custom ROM without installing custom recovery.
Currently not able to install CWM recovery in my phone. Also when I tried to boot my phone into recovery, it is not working. Is it because there are no custom recovery installed?
If anyone can tell me how to install the custom recovery in my system, will be very helpful. I've tried installing ROM Manager from Play Store, but it is unable to recognize my device. Also Quick Boot app from Play Store is not able to boot into recovery mode. Also tried using Flashtool and fastboot, not working either. :crying:
Right now, I'm not able to proceed with installing CM11 ROM in my Xperia because I'm afraid I will not be able to boot into recovery mode and hence will not be able to complete the installation and ultimately end up with a bricked phone.
Any help will be greatly appreciated..!!
Regards,
~Ayan
here the link: http://forum.xda-developers.com/showthread.php?t=2649923
but if you want to install a rom (on UBL) this is not mandatory to use recovery before bcoz before flahing the rom u have to flash the boot.img of that rom and it contains recovery... so it is good when u are on a UBL...
or just flash a kernel that have recovery
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
psss... after installing recovery take nandroid backup of current rom..... if will help you when you encounter a bootloop
Nevermind...
deathviper said:
here the link: http://forum.xda-developers.com/showthread.php?t=2649923
but if you want to install a rom (on UBL) this is not mandatory to use recovery before bcoz before flahing the rom u have to flash the boot.img of that rom and it contains recovery... so it is good when u are on a UBL...
or just flash a kernel that have recovery
---------- Post added at 09:41 AM ---------- Previous post was at 09:40 AM ----------
psss... after installing recovery take nandroid backup of current rom..... if will help you when you encounter a bootloop
Click to expand...
Click to collapse
Thanks deathviper. Followed the instructions and got it installed. Also completed installing CM11 ROM in my Xperia. The link was very helpful. I also followed this link: http://www.teamandroid.com/2014/03/...11-xperia-sp-c5302-c5303-kitkat-custom-rom/2/ to install CM11 ROM in my Xperia SP.
Thanks again..!!
rbertoche said:
I've allways thought that a locked bootloader would break your boot to a non-stock kernel. I think I read it from doomlord.
Now I wonder if it only blocks fastboot...
Recently I saw a post about CM10.2 working on locked devices... Now you're saying the same, maybe it started working lately somehow...
Though... Sure you saw that work?
I'm about to relock my device and take my chances, should get to it
Update: You may not want to test something for the first time... This one is tested: http://forum.xda-developers.com/showthread.php?t=2649923
It's a much longer way. To start with you must get root and CWM recovery on 4.1.2, only to get ROOT on 4.3.
Click to expand...
Click to collapse
i was talking bout ubl.... not lbl
Oh... I got it all wrong =p sorry
Sent from my C5303 using XDA Free mobile app
rbertoche said:
Oh... I got it all wrong =p sorry
Sent from my C5303 using XDA Free mobile app
Click to expand...
Click to collapse
no prb.... always try to clear your thought and others tooo...
deathviper said:
no prb.... always try to clear your thought and others tooo...
Click to expand...
Click to collapse
I flashed my xperia sp ( same firmware ) to candy5 using the same method . But I did not flash Gapps in one go . After booting the new ROM everything works fine but I am unable to get into recovery now( remains stuck in sony logo) . I used Rashr , the CWM SP too which I used it when my phone was on stock ROM . Left without essential Gaaps . Please help .
you can do this
Download xperia recovery manager from play store

[Q] boot looping like no other

hey everyone.
really just want to make sure im flashing this rom correct.
mainly because after i wipe everything. data system, exc.
when i go to reboot the device reboots, goes to Samsung galaxy note 4.
then turns off.. vibrates twice then goes back to the samsung galaxy note 4.
rom i am trying to flash is alliance v1.1
the rom i am coming from is the alliance tmobile beta
any info would help
thanks!!!
holt3113 said:
hey everyone.
really just want to make sure im flashing this rom correct.
mainly because after i wipe everything. data system, exc.
when i go to reboot the device reboots, goes to Samsung galaxy note 4.
then turns off.. vibrates twice then goes back to the samsung galaxy note 4.
rom i am trying to flash is alliance v1.1
the rom i am coming from is the alliance tmobile beta
any info would help
thanks!!!
Click to expand...
Click to collapse
Dont wipe system after you flash the ROM. Only wipe cache. If you wipe system you are earasing the ROM.
Sent from my SM-N910T using XDA Free mobile app
Help!
Did you end up figuring this out? I've just had the same thing happen to me!
This build is a COD6..
have you folks updated your bootloader and modem???
If your flashing the partial firmware using odin.. then you need to boot directly into recovery and flash the Rom.
Please post a screen shot of "about device" so i can see your baseband..
Sent from my SM-N910T using Tapatalk
Flashvetrin said:
This build is a COD6..
have you folks updated your bootloader and modem???
If your flashing the partial firmware using odin.. then you need to boot directly into recovery and flash the Rom.
Please post a screen shot of "about device" so i can see your baseband..
Sent from my SM-N910T using Tapatalk
Click to expand...
Click to collapse
I'm not really sure what you mean, I'm still relatively new at this.
It wouldn't boot at all, but I managed to install twrp through the recovery. Afterwards I put the rooted stock ROM on the SD card and did a wipe/install from recovery and now it's stuck doing the loop and vibrating twice each time.
I can't figure out how to find that information when I only have access to recovery, it's the Bell version in Canada, SM-N910W8. I had it up to date and just rooted it last night.
Thanks for your quick reply!
Edit: I did change a couple of things with build.prop.editor before it happened, that's what I'm thinking screwed this.
AaronBG said:
I'm not really sure what you mean, I'm still relatively new at this.
It wouldn't boot at all, but I managed to install twrp through the recovery. Afterwards I put the rooted stock ROM on the SD card and did a wipe/install from recovery and now it's stuck doing the loop and vibrating twice each time.
I can't figure out how to find that information when I only have access to recovery, it's the Bell version in Canada, SM-N910W8. I had it up to date and just rooted it last night.
Thanks for your quick reply!
Edit: I did change a couple of things with build.prop.editor before it happened, that's what I'm thinking screwed this.
Click to expand...
Click to collapse
So you have twrp installed..
Ok. Do you have a nandroid back on your ext sd by chance?? If so reboot recovery under advanced wipe sys/data/dal/cache.. then navigate to your ext were your restore is and flash it..
If not follow these steps.[emoji16]
Step #1 download either a stock rom of your choice or something like This
And a copy of the bioshock kernal. If you decide to use the rom i provided the link for. Check the md5 sums from the download source after you download the files to make sure they match. Download them onto your ext sd card.
Step#2 reboot recovery go to wipe advanced and check/ system/data/dalvik/cache/and internal.. ×3
Then factory data reset x3
Then nav to ext sd and flash the rom.
Note: if you flash the link i provided you have to flash the kernel in the same session... READ THE OP..
Note: #2 when you wipe internal your internal sd card will be wiped so if you need to save pics or whatever do so prior..
You can try skipping the internal once but if it loops then you prob should wipe it like i said and flash kernal such as bioshock.
Ok thats it for now please follow and read what i wrote carefully..
And for now stay away from COD6 for now.. unless you understand the procedure... its all about the kernal flashing in the same session before you boot up..[emoji41]
One last thing.. its dangerous to be
"NEW AT THIS" and just start flashing stuff you need to be carefull and read read read.. in your case W8 you need to flash a kernel 90% of the time same setting..
Sent from my SM-N910T using Tapatalk
@Flashvetrin, +1 on the post, also, this guy may need and must start here.....
http://forum.xda-developers.com/not...sy-steps-stock-odin-n910tuvu1anih-cf-t2903733
---------- Post added at 10:16 AM ---------- Previous post was at 10:14 AM ----------
AaronBG said:
I'm not really sure what you mean, I'm still relatively new at this.
It wouldn't boot at all, but I managed to install twrp through the recovery. Afterwards I put the rooted stock ROM on the SD card and did a wipe/install from recovery and now it's stuck doing the loop and vibrating twice each time.
I can't figure out how to find that information when I only have access to recovery, it's the Bell version in Canada, SM-N910W8. I had it up to date and just rooted it last night.
Thanks for your quick reply!
Edit: I did change a couple of things with build.prop.editor before it happened, that's what I'm thinking screwed this.
Click to expand...
Click to collapse
And did you happen to back up before making those changes? Anytime you do ANYTHING including sneezing, MAKE A BACKUP!
AxAtAx said:
@Flashvetrin, +1 on the post, also, this guy may need and must start here.....
http://forum.xda-developers.com/not...sy-steps-stock-odin-n910tuvu1anih-cf-t2903733
---------- Post added at 10:16 AM ---------- Previous post was at 10:14 AM ----------
And did you happen to back up before making those changes? Anytime you do ANYTHING including sneezing, MAKE A BACKUP!
Click to expand...
Click to collapse
Hes on W8 so unless im mistakin COD6 bootloader and modem will not work.
He can flash the builds but needs a kern to complete the boot... like bio..
And doesnt need the COD6 firmware..
He prob can flash the rom he wanted he just needs to follow it with the kern before he booted...
Easypeasy..[emoji3]
Sent from my SM-N910T using Tapatalk
i just ended up, starting over, doing a stock odin 5.0.2 then re rooting and re installing twrp.
and now it works fine!!

Categories

Resources