Kindle fire bricked - 7" Kindle Fire HD Q&A, Help & Troubleshooting

Yesterday I tried to re-install twrp and I guess I missed a step because it's stuck in a boot loop now. I get the "Kindle Fire" logo with no animation, it stays on for about 10 seconds and then restarts and does the same thing (logo for 10 seconds and reboots). The computer doesn't detect it period so I can't do any adb or fastboot commands. Am I going to need a factory cable to fix this?
Kindle Fire HD 7"

That's the first thing I would recommend. Once you get it, use Kindle Fire First Aide to restore the stock bootloader.

Related

[Q] Big Issue with Kindle Fire

So, I'm running software 6.3.1(stock), and I wanted to root. So, i followed a tutorial that said I should install TWRP recovery after I root. But, dummy me, tried to install TWRP recovery on a stock kindle fire. After a couple of minutes of installing, a console message appeared that said that the program told the kindle to boot in fastboot mode. Well, after 10 minutes, the Kindle was still not booted, so I disconnected it from my PC. And now, when I try to turn the Kindle back on, it just stops at the splash screen. I'm thinking that it's bricked, so can anyone help me get this fixed?

[Q] Installed 2nd Bootloader Now Kindle Wont Load...... Help Please?

Hey i have had my kindle fire rooted for a very long time recently i tried to install a 2nd bootloader and TWRP following the instructions on the site..... I used KF First Aid and went through the options. The kindle went into fastboot mode and then cut out and when it rebooted i was presented with a screen saying: Kindle Fire System Recovery.... Your kindle doesn't seem to be able to boot. Resetting your kindle to Factory Defaults may help you to fix this issue. Reboot Your Kindle or Reset to factory defaults.
I have tried resetting to factory defaults i have tried using KF First Aid to restore backup images how ever my computer no longer picks up the kindle not as an adb device or fastboot device when ever i reboot it would show the original kindle fire logo (white and orange) then the screen goes black the logo reappears with this "Kindle Fire System Recovery.... Your kindle doesn't seem to be able to boot. Resetting your kindle to Factory Defaults may help you to fix this issue. Reboot Your Kindle or Reset to factory defaults."
Can someone please help me as to how to correct or reverse the damage i have done?
Do you own a fast boot cable? I think that would be your next step...
Sent from my GT-P3110 using xda app-developers app

Boot logo loop

Hi, I tried to put CM mod 10 on my kindle fire hd but flashed it incorrectly. At first I had the red screen of death but after purchasing a factory cable I was able to get out of that. I used KFHD_SRTv1.3.5 to fix it. Now I'm stuck on the yellow amazon fire boot logo. I see the logo for a couple of seconds and then it restarts.
I've tried numerous things including kindle fire first aide. I think this is my problem:
Under my device manager I see the Andriod ADB interface under Kindle Fire
however, when I try adb devices nothing comes up.
Does anyone know how to fix this?
Thanks
-FM
I was having this happen to me while trying to debug something the other day, try uninstalling the driver and reinstalling it, or rebooting your PC. This usually happens for me if I reboot the kindle into recovery or out of recovery while leaving it plugged into my PC.
Sent from my Amazon Kindle Fire HD running CM10.1 Tablet UI using xda-developers app

Help: Kindle Fire has a bootloop !!!!

Hello and good morning.
I am writing here, because I have a big problem. My Kindle Fire HD (first Generation) does not start any more. After an update (Cyanogenmod tate) I only get the yellow Kindle fire logo. And after few seconds the Kindle starts again. Then - after about five minutes - everything is dead. But if I do a reset I get the same situation. Unfortunately I get no connection to my device via the computer (tried Windows 7 64 bit and Ubuntu). With adb devices I cannot detect my Kindle. Is there a possibility to get into fastboot to install CWR etc.?
Help me, please
Herbert
So to clarify, the first time the logo comes up it freezes and then resets itself, followed after about 5 minutes the kindle just shuts itself off?? Also, you ask about getting into fastboot to install CWM. Do you not have a recovery installed? Such as CWM or TWRP?
I installed TWRP version 2.6
But I also cannot boot into the recovery (Power on & Vol +). Then nothing happens. I actually have ordered a fastboot-cable. Maybe I have success with this cable. Otherwise it is finished for me.
Yea try booting into recovery and flashing the system images to get back to stock. That's all i can think of since i'm not entirely sure what happened, either you got a bad download or your kindle just flipped out and essentially bricked itself.

Un-Bricked My Kindle Fire But Red Screen + FB

Hi There,
I'm a little confused, I un bricked my Kindle Fire HD7 with KFHD following all the instructions upon installing the new "system", it says done so I disconnect the fast boot cable and try booting the Kindle it loads the Kindle Fire Screen, then flashes up with a red screen then loads the fast boot menu when there is no fastboot cable connected.
I would just like to get my tablet working again, I have also left it on charge and left it off over night still not working?
Thanks
Maybe this will help...look for instructions in step 6 in the first post. http://forum.xda-developers.com/showthread.php?p=41239048
Sent from my KFFOWI using Tapatalk

Categories

Resources