Database Develop

Problem to install ICSSGS RC 4.1

I try to install but don't work... after that i flash it, the phone lock to logo screen "google" and i can't go to CWM i must use odin to reflash. If install rc3.1 it's all ok.
Where is the problem?
Thanks.

Did you try looking at the help page on the thread in the development section? It's right before the post is finished, there will be a link that will lead you there.
Hope that helps, if not I can try to just copy and paste the instructions hahaha

scheccia said:
I try to install but don't work... after that i flash it, the phone lock to logo screen "google" and i can't go to CWM i must use odin to reflash. If install rc3.1 it's all ok.
Where is the problem?
Thanks.
Click to expand...
Click to collapse
Did you do a full wipe before flashing RC4.1?

kabracity said:
Did you do a full wipe before flashing RC4.1?
Click to expand...
Click to collapse
yes... i try to flash a miui rom first also.
I try to do a full wipe... i try to install a original rom... but when i flash rc4.1 the phone stuck to logo.

Ensure you have backed up your EFS directory; if you don't know how ask.
To be honest, there appears to be some inconsistency in the reliability of the 4.1 RC release (across handsets); I have had persistent WIFI issues and then when the wifi fix was released I found the phone to just be a little laggy.
My advice if RC 3.1 works well for you is to keep it on there for now and wait for the next release they make.
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.

torrentship said:
Ensure you have backed up your EFS directory; if you don't know how ask.
To be honest, there appears to be some inconsistency in the reliability of the 4.1 RC release (across handsets); I have had persistent WIFI issues and then when the wifi fix was released I found the phone to just be a little laggy.
My advice if RC 3.1 works well for you is to keep it on there for now and wait for the next release they make.
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
Click to expand...
Click to collapse
I agree with you... RC3 was fine for me... fast and all worked... RC4 has some wifi issues... It switch on/off and doesnt stop till i reboot the phone... im thinking about to downgrade to RC3.1 and wait till the next release...
Sent from my GT-I9000 using XDA App

torrentship said:
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
Click to expand...
Click to collapse
Yes i try it(no backup efs)
If i flash 2 time the rom the phone stuck it and i can't enter in cmw
.. is the only rom that give me this problem... bha...

Hello, have you tried to download the rom again? Maybe it's a bad download..

That's odd, for me i got stats 7 but was because i was flashing the I9000B version and my phone was with the CWM for I9000. Try using odin and flash a sotck rom, after that install the CWM and then the RC4.1.
If anyone want to know the procedure that i do to install the RC4.1 is this:
Starting for CM7 --> flash the ARO 2.3.3 rom to re-write the bootloader (check this option in odin) --> flash the ZTO 2.2 rom to re-partition in original size partitions --> flash the 2.2.1 ARO because it's a nice rom and don't have all the trash that is present in ZTO version --> through kies flahs the ARO 2.3.3 original.
After that the procedure to install the RC4.1 is the standard: flash CWM then install the ROM.

I had problems going from 3.1 to 4.1. Same issue as OP.
Process I followed:
-Flashed CWM through heimdall
-Flashed devil kernel
-Flashed CM7 (had to do this twice in a row)
-Flashed ICSSGS 3.1
-Flashed 4.1 but before I rebooted my phone, I flashed Devil one last time.
Since then, phone has been rocking along just fine!
Sent from my GT-I9000 using Tapatalk

Bena1988 said:
Hello, have you tried to download the rom again? Maybe it's a bad download..
Click to expand...
Click to collapse
Yes... three times.

I'm having the same problem here.
I tried the first point on the Common Issues page but I'm still not able to go into CWM!
I flashed the Speemod Kernel using heimdll but I can't go back to CM7. I'm getting a Stat 7 error.
Also tried the Devils kernel (Devil_1.0_CFS) with no help ....
Any ideas?

Just wondering...
MaesterB said:
I had problems going from 3.1 to 4.1. Same issue as OP.
Process I followed:
-Flashed CWM through heimdall
-Flashed devil kernel
-Flashed CM7 (had to do this twice in a row)
-Flashed ICSSGS 3.1
-Flashed 4.1 but before I rebooted my phone, I flashed Devil one last time.
Since then, phone has been rocking along just fine!
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
why on earth did you flash the CM7 as a part of the process? I always have just downloaded an appropriate kernel (devil, stockplus etc..) + ICS ROM (latest was RC4.1), once I'd rooted my stock 2.3.6 ROM with CF-Root (takes only 5 minutes). ICSSGS' ROMs can be applied straight on top of any previous ROM, the only requirement is that you have root privileges + CWM installed. Flashing CM7 is often frustrating, at least for me. I personally see no point in flashing it before the ICS ROM. If you know better, pleasy enlighten me

Arvokm said:
why on earth did you flash the CM7 as a part of the process? I always have just downloaded an appropriate kernel (devil, stockplus etc..) + ICS ROM (latest was RC4.1), once I'd rooted my stock 2.3.6 ROM with CF-Root (takes only 5 minutes). ICSSGS' ROMs can be applied straight on top of any previous ROM, the only requirement is that you have root privileges + CWM installed. Flashing CM7 is often frustrating, at least for me. I personally see no point in flashing it before the ICS ROM. If you know better, pleasy enlighten me
Click to expand...
Click to collapse
Thats the way I do all went well...
Sent from my GT-I9000 using XDA App

[Q] Flashing ROMS like crazy won't boot ne of them.

I've got 2 1897...one is runnin slim ics fine...the other is acting funny...I flashed apex...then I flashed froyo stock...then flashed speedmod kernel and tried to flash cyanogen...download mode works fine..even recovery...but for some reason nothing actually BOOTS!!! Any suggestions?

You said you flashed stock... But does it boot? Try doing things again but follow the steps more carefully
Sent from my CM9 ICS i897 Captivate

motiv8d365 said:
I've got 2 1897...one is runnin slim ics fine...the other is acting funny...I flashed apex...then I flashed froyo stock...then flashed speedmod kernel and tried to flash cyanogen...download mode works fine..even recovery...but for some reason nothing actually BOOTS!!! Any suggestions?
Click to expand...
Click to collapse
Did you wipe the cache partition? That was my problem when this happened to me as cyanogenmod uses a different cache partition.
If you still can't get it work, try mounting the internal SD card to MTP and flashing a different ROM, if not, you'll have to restore a stock image with Odin and start from the beginning.

Help please "aokp build 40" please help please

im from stock rom 2.3.3 i just install AOKP build 40 yesterday but before that my CP reboot itself maybe 4x a day in stock rom (
is there anyone help me how to solve this?
IM USING AOKP build 40 > force close in CAMERA if i capture picture
ABOUT THE UNIT > reboot itself
HOW TO SOLVE THIS PLEASE (

suzhipack said:
im from stock rom 2.3.3 i just install AOKP build 40 yesterday but before that my CP reboot itself maybe 4x a day in stock rom (
is there anyone help me how to solve this?
IM USING AOKP build 40 > force close in CAMERA if i capture picture
ABOUT THE UNIT > reboot itself
HOW TO SOLVE THIS PLEASE (
Click to expand...
Click to collapse
Before you installed AOKP, Did you
root the GB2.3.3?
inztalled overcome kernel?
do a factory reset wipe and data cache wipe?
After AOKP installation, did you do:
flash gappsxxxx.zip?
do factory reset wipe and data cache wipe?
Your problem could be caused by permission problems.
EDIT: No! overcome kernel is NOT compatible with AOKP or ANY other ICS ROM.

here:
i restock my galaxy tab p1000 to 2.3.3. gingerbread with odin..
i install kmicic rom v6.0.2 via CWM..
i flash overcome tar file latest with odin..
and now its good whenever i plug it to charger or computer..
if i used it with out connecting it to charger or computer maybe i can use it to how many hours and it will turn off again by this time if i will pull out the sim and turn it on again IT WILL TURN ON AND I CAN USE IT..
did you get my phone sir? how to solve this?

suzhipack said:
here:
i restock my galaxy tab p1000 to 2.3.3. gingerbread with odin..
i install kmicic rom v6.0.2 via CWM..
i flash overcome tar file latest with odin..
and now its good whenever i plug it to charger or computer..
if i used it with out connecting it to charger or computer maybe i can use it to how many hours and it will turn off again by this time if i will pull out the sim and turn it on again IT WILL TURN ON AND I CAN USE IT..
did you get my phone sir? how to solve this?
Click to expand...
Click to collapse
seems like, your problem when you restocked your 2.3.3 you did not root your Tab and installed kmicic rom via CWM directly.
Please not that you need root access if you flash ROM from CWM.
Please install GB-stock-safe in the overcome website to ensure you to have rooted GB2.3.3 -- You can flash overcome kernel after you install GB-stock-safe before installing other ROM.

now if i use camera to picture it will turn off (
i think ROM is not the problem i think the unit is the problem but how can i fix this
even stock rom does this way (

suzhipack said:
now if i use camera to picture it will turn off (
i think ROM is not the problem i think the unit is the problem but how can i fix this
even stock rom does this way (
Click to expand...
Click to collapse
well, look at this this way,.. you have nothing to lose installing that GB-Stock-Safe from the overcome website, or even the 2.3.6 chromed you mentioned.
Note: After install complete and run the initial setup, it is better if you do a full wipe.

Tab p1000 boots to android recovery after aokp fail??

hi all
well after flashing my p1000m(bell canada) numerous time,i got adventurous and tried to flash ics .
AOKP SGT7 BUILD 40
updated to stock bell gingerbread,rooted.
used odin to install overcome kernal 4.0
installed build 40 thru cwm,everything seemed to go fine.
went into bootloop with aokp screen and some audio message.
tried to flash back to original bell gingerbread with pit file and repartition checked,all seemed to go well but now boots to android recovery.
i think the partitions are screwed up.
i have original bell gingerbread with pit.
unit charges,goes into recover and download mode so seems softbrick.
odin detects and always finishes with no errors.
tried all the usual un brick tricks but not working.
any help appreciated

Stock via Odin:
Which "stock" gingerbread rom did you use in Odin? Are you using Overcome's gb_stock_safe .tar?
Bootloops:
After first flashing AOKP #40, it should bootloop since it first needs to update the recovery version as well as convert to mtd. Did you then go back into recovery and flash AOKP #40 a 2nd time? The 2nd flash installs the rom.
Btw, is your p1000 gsm or cdma?

hi
got it solved by the overcome restock rom.
but i only flashed once.
now running aokp build 40 ,most apps fc,i will reflash and see if that helps.
thanks

You need to wipe before flashing AOKP (or even after flashing, no harm)
And never restore system apps from gb to pics, or across any dissimilar rooms.
Sent from my GT-P1000 using xda app-developers app

priyana said:
You need to wipe before flashing AOKP (or even after flashing, no harm)
And never restore system apps from gb to pics, or across any dissimilar rooms.
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
did the double flash and all seems fine now.
apps that fc yesterday are working fine after the reflash.
just gotta test my sim and the phone/sms part now.

[Trouble][After Update] WiFi & Bluetooth not working yet!!!

Hi guys
My friend has a Galaxy Ace running Froyo 2.2, everything went so OK till he tried to update into Gingerbread 2.3.4 via Odin & cooper
Device boots well and everything is smoothly good, but when he tried to access WiFi, it not works yet!!! The Bluetooth stopped working too
Tried to give him another version of GB 2.3.6 also flashable via Odin, nothing changed!! Tried to flash 4.2.2 CyanogenMod, thinking it's a Kernel issue, nothing changed too still not working
any help?!!

TeraXimoS said:
Hi guys
My friend has a Galaxy Ace running Froyo 2.2, everything went so OK till he tried to update into Gingerbread 2.3.4 via Odin & cooper
Device boots well and everything is smoothly good, but when he tried to access WiFi, it not works yet!!! The Bluetooth stopped working too
Tried to give him another version of GB 2.3.6 also flashable via Odin, nothing changed!! Tried to flash 4.2.2 CyanogenMod, thinking it's a Kernel issue, nothing changed too still not working
any help?!!
Click to expand...
Click to collapse
Flash a fresh stock via Odin and then do wipe data/factory reset and wipe cache partition if it doesn't work you could try to flash CF-Root b84 kernel over android gingerbread it contains useful libs and wifi modules

Recently he told me something strange!!!
he flashed CyanogenMod 4.2.2 without being rooted yet!!! only custom recovery was installed.... can it be strange??

TeraXimoS said:
Recently he told me something strange!!!
he flashed CyanogenMod 4.2.2 without being rooted yet!!! only custom recovery was installed.... can it be strange??
Click to expand...
Click to collapse
No, but I don't like this method CM roms are pre-rooted

Tried to flash the Kernel with CWM first time. It says installtion aborted
so Flashed another version of CWM and tried again.. it flashed successfully but WiFi still doesnt work at any case
Any help??

TeraXimoS said:
Tried to flash the Kernel with CWM first time. It says installtion aborted
so Flashed another version of CWM and tried again.. it flashed successfully but WiFi still doesnt work at any case
Any help??
Click to expand...
Click to collapse
...do 3 wipes via CWM 5.0.2.6 FIXED and then use Odin to flash a fresh stock finally do wipe data/factory reset and cache partition. Check out if your wifi works, if not flash ROOT + CWM and finally flash Cf-Root b84. If your wifi still not working, It might be a hardware trouble

Can it really be a hardware fail?? Everything was working PERFECTLY just before update!!

Up

TeraXimoS said:
Up
Click to expand...
Click to collapse
Try dialing *#*#526#*#* in Stock rom