Database Develop

Problem to install ICSSGS RC 4.1

I try to install but don't work... after that i flash it, the phone lock to logo screen "google" and i can't go to CWM i must use odin to reflash. If install rc3.1 it's all ok.
Where is the problem?
Thanks.

Did you try looking at the help page on the thread in the development section? It's right before the post is finished, there will be a link that will lead you there.
Hope that helps, if not I can try to just copy and paste the instructions hahaha

scheccia said:
I try to install but don't work... after that i flash it, the phone lock to logo screen "google" and i can't go to CWM i must use odin to reflash. If install rc3.1 it's all ok.
Where is the problem?
Thanks.
Click to expand...
Click to collapse
Did you do a full wipe before flashing RC4.1?

kabracity said:
Did you do a full wipe before flashing RC4.1?
Click to expand...
Click to collapse
yes... i try to flash a miui rom first also.
I try to do a full wipe... i try to install a original rom... but when i flash rc4.1 the phone stuck to logo.

Ensure you have backed up your EFS directory; if you don't know how ask.
To be honest, there appears to be some inconsistency in the reliability of the 4.1 RC release (across handsets); I have had persistent WIFI issues and then when the wifi fix was released I found the phone to just be a little laggy.
My advice if RC 3.1 works well for you is to keep it on there for now and wait for the next release they make.
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.

torrentship said:
Ensure you have backed up your EFS directory; if you don't know how ask.
To be honest, there appears to be some inconsistency in the reliability of the 4.1 RC release (across handsets); I have had persistent WIFI issues and then when the wifi fix was released I found the phone to just be a little laggy.
My advice if RC 3.1 works well for you is to keep it on there for now and wait for the next release they make.
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
Click to expand...
Click to collapse
I agree with you... RC3 was fine for me... fast and all worked... RC4 has some wifi issues... It switch on/off and doesnt stop till i reboot the phone... im thinking about to downgrade to RC3.1 and wait till the next release...
Sent from my GT-I9000 using XDA App

torrentship said:
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
Click to expand...
Click to collapse
Yes i try it(no backup efs)
If i flash 2 time the rom the phone stuck it and i can't enter in cmw
.. is the only rom that give me this problem... bha...

Hello, have you tried to download the rom again? Maybe it's a bad download..

That's odd, for me i got stats 7 but was because i was flashing the I9000B version and my phone was with the CWM for I9000. Try using odin and flash a sotck rom, after that install the CWM and then the RC4.1.
If anyone want to know the procedure that i do to install the RC4.1 is this:
Starting for CM7 --> flash the ARO 2.3.3 rom to re-write the bootloader (check this option in odin) --> flash the ZTO 2.2 rom to re-partition in original size partitions --> flash the 2.2.1 ARO because it's a nice rom and don't have all the trash that is present in ZTO version --> through kies flahs the ARO 2.3.3 original.
After that the procedure to install the RC4.1 is the standard: flash CWM then install the ROM.

I had problems going from 3.1 to 4.1. Same issue as OP.
Process I followed:
-Flashed CWM through heimdall
-Flashed devil kernel
-Flashed CM7 (had to do this twice in a row)
-Flashed ICSSGS 3.1
-Flashed 4.1 but before I rebooted my phone, I flashed Devil one last time.
Since then, phone has been rocking along just fine!
Sent from my GT-I9000 using Tapatalk

Bena1988 said:
Hello, have you tried to download the rom again? Maybe it's a bad download..
Click to expand...
Click to collapse
Yes... three times.

I'm having the same problem here.
I tried the first point on the Common Issues page but I'm still not able to go into CWM!
I flashed the Speemod Kernel using heimdll but I can't go back to CM7. I'm getting a Stat 7 error.
Also tried the Devils kernel (Devil_1.0_CFS) with no help ....
Any ideas?

Just wondering...
MaesterB said:
I had problems going from 3.1 to 4.1. Same issue as OP.
Process I followed:
-Flashed CWM through heimdall
-Flashed devil kernel
-Flashed CM7 (had to do this twice in a row)
-Flashed ICSSGS 3.1
-Flashed 4.1 but before I rebooted my phone, I flashed Devil one last time.
Since then, phone has been rocking along just fine!
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
why on earth did you flash the CM7 as a part of the process? I always have just downloaded an appropriate kernel (devil, stockplus etc..) + ICS ROM (latest was RC4.1), once I'd rooted my stock 2.3.6 ROM with CF-Root (takes only 5 minutes). ICSSGS' ROMs can be applied straight on top of any previous ROM, the only requirement is that you have root privileges + CWM installed. Flashing CM7 is often frustrating, at least for me. I personally see no point in flashing it before the ICS ROM. If you know better, pleasy enlighten me

Arvokm said:
why on earth did you flash the CM7 as a part of the process? I always have just downloaded an appropriate kernel (devil, stockplus etc..) + ICS ROM (latest was RC4.1), once I'd rooted my stock 2.3.6 ROM with CF-Root (takes only 5 minutes). ICSSGS' ROMs can be applied straight on top of any previous ROM, the only requirement is that you have root privileges + CWM installed. Flashing CM7 is often frustrating, at least for me. I personally see no point in flashing it before the ICS ROM. If you know better, pleasy enlighten me
Click to expand...
Click to collapse
Thats the way I do all went well...
Sent from my GT-I9000 using XDA App

[Q] Galaxy Tab P1000 with CM9 not boot

I tried doing the update to CM9 March, and I fail, I fail to boot the tablet (semibrick). The steps I follow are:
2.3.3 Delivery of Gingerbread rooted
With the CMW 3.0.0.5
Reboot into recovery mode with the CMW:
1 - I flash the ROM from sdcard
2 - the same with the Kernel
3 - google apps
Once everything without problems, restarting the tablet remains in the initial logo Galaxy Tab, there does not happen.
If I reboot into recovery mode, I have the latest CWM, but there is no way to boot.
I tried also to replace the zImage from ROM but as usual, someone could help me??
If i would repair the semibrick, I need to flash the 2.3.3 ROM, with odin and then make the root another time.
How I can install CM9 on my GT-P1000?
Thanks.

go to the dev section, look for Overcome 4.1 ROM thread.
Follow the restock procedure there.
Then flash Overcome 4.0 kernel.
That will give you the CwM 5.something recovery
AND it will convert your filesystem from RFS to EXT4
Maybe that is what you are lacking.
Once that is done, flash the CM9 as per your original steps.
Good luck.

Thanks Priyana,
I've flashed overcome 4.0 Kernel, and then CM9, and all works perfect.
Now I can use CM9!!!!

wifi and restore problem in cm9
I hope this experience is not useful. If the SIM card into the phone after installing the ROM, wireless does not work. Also, when restoring backup
I have no problem using it. No need to install software updates or any other wireless
tnx
Most of the 30 ROM installation but I LOVE this

that is the wifi code issue with middle eastern tab. (ICS only)
http://forum.xda-developers.com/showthread.php?t=1445766

[Q] Unfortunately, Application Installer has stopped: on any wipe-install

Hi,
I am having trouble flashing ROMs, my move from GB to ICS was not very straight forward but it worked, used Heimdall in the end (Mac for ODIN). However, now I am unable to wipe and flash any ROM, I can flash without wipe any ROM but no ROM works if I wipe and flash. I have tried a lot of them.
1. I have checked with parted (check), dd, and e2fsck. no bad blocks or read errors
2. I have flashed with Abyss RedPill and CF-Root CWM, ROMs boot but say: "Unfortunately, Application Installer has stopped" with "OK" button. No matter how many times I reboot it or press "OK" on it no ROM works.
3. Even the ROM I am running, it shows me 500 MB free on Settings > Applications but I sometimes get out of space while installing apps and "Move to SD" fails most of the time. That is the primary reason for which I want to wipe and clean install.
Please help. Any pointers will be highly appreciated. I really want to use this phone in a working condition till October. I know I will need the Note 2 and want to skip the S3.
Thank You.

Format both internal and external...
Download KL3 GB Stock Rom...
Do all 3 wipes and connect in download mide
Flash kl3 via pc odin...
Follow the videos in my sig to flash any ics rom
Its simple...
Install redpill 4.2..there are many out there search for the one that says redpilloriginaltouchlogo
Do all 3 wipes and flash any ics rom in redpill recovery
If none work...go to alliance ics rom
Follow each and every step given by robbie...
Or go to stock rooted gb...go to TMT Hybrid MIUI rom...flash according to method 5...
It should work
Good Luck

Thank you for your response, but I will appreciate if you can elaborate which recovery to use for which step and specially where to do the first step "Format both internal and external"? And once I have done that, how on earth can I do all 3 wipes because I will have no recovery and I can not have a flashable ROM file left either.
Thanks again.
Rulinglionadi said:
Format both internal and external...
Download KL3 GB Stock Rom...
Do all 3 wipes and connect in download mide
Flash kl3 via pc odin...
Follow the videos in my sig to flash any ics rom
Its simple...
Install redpill 4.2..there are many out there search for the one that says redpilloriginaltouchlogo
Do all 3 wipes and flash any ics rom in redpill recovery
If none work...go to alliance ics rom
Follow each and every step given by robbie...
Or go to stock rooted gb...go to TMT Hybrid MIUI rom...flash according to method 5...
It should work
Good Luck
Click to expand...
Click to collapse

I assume you have a working GB rom right now? ??
If yes...format and paste the recovery file...even if you dont have a working rom....flash kl3 via pc odin...
Go to recovery...it goes to android recovery and do the wipe...firmat the storage and paste redpill recovery which is given in the TMT MiUI thread...
Rest is as i explained last time...
---------- Post added at 07:57 AM ---------- Previous post was at 07:56 AM ----------
FYI if you dont have cwm...it goes to android based recovery..where you can do the wipes..

I have a working ICS ROM with CWM, but when I wipe and flash a new ROM, it does not work. The boot but say "Unfortunately, Application Installer has stopped". I can not get to the launcher or any application.
Rulinglionadi said:
I assume you have a working GB rom right now? ??
Click to expand...
Click to collapse

tazzix said:
I have a working ICS ROM with CWM, but when I wipe and flash a new ROM, it does not work. The boot but say "Unfortunately, Application Installer has stopped". I can not get to the launcher or any application.
Click to expand...
Click to collapse
That is why i said...format both
Install kl3 via pc odin..
Root and install cwm
Flash any rom you want
Or else flash robbies alliance gb and alliance ics over it
Or flash TMT MIUI over your stock rooted GB...method 5 is my recommendation

Thank you, downloading KL3 Singapore stock right now.
Please tell me where is option to "format both" or "format internal and external", I will try to get access to a Windows machine if its in ODIN.
Rulinglionadi said:
That is why i said...format both
Install kl3 via pc odin..
Root and install cwm
Flash any rom you want
Or else flash robbies alliance gb and alliance ics over it
Or flash TMT MIUI over your stock rooted GB...method 5 is my recommendation
Click to expand...
Click to collapse

tazzix said:
Thank you, downloading KL3 Singapore stock right now.
Please tell me where is option to "format both" or "format internal and external", I will try to get access to a Windows machine if its in ODIN.
Click to expand...
Click to collapse
You can do it in your phone itself...
Settings > storage
Or connect it to pc and format just like you format a pendrive
Its available in the CWM too...

Just wanted to thank everyone in this thread for helping me solve this issue.
I was on a custom GB ROM, tried to flash to Stock ICS (LKR) using Heimdall but kept encountering Application Installer crash. Based on advice in this thread I took the following steps:-
1. Flashed to Stock KKA GB ROM and rooted it using CF-Root
2. Flashed to Stock LKR ICS ROM through CWM.
No Application Installer Crash this time.

galaxy s2
I have the same problem on my galaxy s2, running unrooted stock 4.0.4 rom. And my home button isnt working :crying:

ndosh1man said:
I have the same problem on my galaxy s2, running unrooted stock 4.0.4 rom. And my home button isnt working :crying:
Click to expand...
Click to collapse
I had the problem when using heimdall to flash but the problem was sorted after flashing with odin. Seems that odin changes some other settings during the flash.
Sent from my GT-N7000 using xda premium

unfortunetely installer has stopped ok
everytime i open my galaxy note gt n7000 come out on the screen unfortunetely installer has stopped ok

[Q] galaxy note wont be recognized by either kies or odin

i flashed to 4.2.2 this morning but i didn't like it so i decided to go back to stock jelly bean but i can't !! kies wont connect to my phone it would just keep loading and loading and never actually open the phone itself so i tried downloading the drivers manually but then odin doesn't recognize at all i tried unitsalling kies , updating , reinstalling nothing would ever work ! but y laptop recognizes the device and i can acess the files but other then this nothing
====update=====
i tried flashing with mobile odin and now it is stuck on samsung blue logo just keeps doing the animation over and over so i connected to pc and odin recgonized and flashed the rom again but then it is stuck on a boot loop and i tried wiping cache and factory data reset but wont work

What rom did you flash. Ics or JB. Install Philz kernel and do a wipe data reboot. If still no go then wipe system data cache and preload and reboot into download mode and flash stock rom again.

Rebooting in recovery and clearing cache and dalvik cache may help..

same problem here.
Mayank Chandwani said:
Rebooting in recovery and clearing cache and dalvik cache may help..
Click to expand...
Click to collapse
It didn't here. I went back from XXLT4 (rooted) to XXLT4 (stock non-root) using ODIN, and the problem was gone. Then I flashed PhilZ 4.93.6 kernel, and the problem was back. No connection, neither USB or Wifi. I was on a rooted stock kernel before, but have no idea what the problem was.
So, as soon as I root the firmware, the connectivity is gone.
Update: it's back. I have no idea why, I'm still on XXLT4 + latest PhilZ kernel.
Next problem: Where can I edit the newly added lockscreen shortcuts? Could it be that flashing PhilZ kernel removed that feature from the settings menu? I can't find it... and I've definitely seen it before I rooted.

zazzel said:
It didn't here. I went back from XXLT4 (rooted) to XXLT4 (stock non-root) using ODIN, and the problem was gone. Then I flashed PhilZ 4.93.6 kernel, and the problem was back. No connection, neither USB or Wifi. I was on a rooted stock kernel before, but have no idea what the problem was.
So, as soon as I root the firmware, the connectivity is gone.
Update: it's back. I have no idea why, I'm still on XXLT4 + latest PhilZ kernel.
Next problem: Where can I edit the newly added lockscreen shortcuts? Could it be that flashing PhilZ kernel removed that feature from the settings menu? I can't find it... and I've definitely seen it before I rooted.
Click to expand...
Click to collapse
Why do you want to flash Philz kernel..just root your phone on the stock kernel..JB stock kernel is bug free..
Go to settings--lock screen--swipe and there you have the option to change it on stock lock screen..do you have a custom lock screen??

Mayank Chandwani said:
Why do you want to flash Philz kernel..just root your phone on the stock kernel..JB stock kernel is bug free..
Go to settings--lock screen--swipe and there you have the option to change it on stock lock screen..do you have a custom lock screen??
Click to expand...
Click to collapse
Thanks! I used PhilZ because it came with cwm, built in root and was easily available.
Do you know how to go back to stock kernel without a full install? (and keep cwm and root). Something like a XXLT4 German / DBT kernel in a ZIP zile I can flash from recovery? I simply don't know where to find that.

Mybe SCS information is missing.*#1234# and view SCS code.

My CSC information is currently "N7000OXALT4" and nothing more. I was half expecting "DBT" behind that. Could that really be the problem?
Looks like I should go for a new nandroid backup & CSC reset?

zazzel said:
Thanks! I used PhilZ because it came with cwm, built in root and was easily available.
Do you know how to go back to stock kernel without a full install? (and keep cwm and root). Something like a XXLT4 German / DBT kernel in a ZIP zile I can flash from recovery? I simply don't know where to find that.
Click to expand...
Click to collapse
The stock kernel is the zImage which is included in the stock rom, and can be flashed.

qnt said:
The stock kernel is the zImage which is included in the stock rom, and can be flashed.
Click to expand...
Click to collapse
Thanks, I figured that out in the meantime, packed zImage into another flashable ZIP and signed it. Now I can theoretically flash it using "mobile ODIN" (to keep root) or from CWM. It's still not the perfect solution since I would definitely want CWM. So currently, I keep running PhilZ and wait for a better solution for the lockscreen icon issue.

whats the issue with lock screen? sorry for asking but after reading the thread i got confused.

[Q] wifi problem

i have restock using gb stock safe flashed overcome kernel went all the way to overcome rom and then flashed alrogers latest cm 10.1 successful but when i try to connect to my wifi it just keep saying connecting... saved wpa2 and wont connect ...anyone can help pls .
i tried two other alroger rom an same problem ......wifi was working on both gingrbread and overcome rom

zadia24 said:
i have restock using gb stock safe flashed overcome kernel went all the way to overcome rom and then flashed alrogers latest cm 10.1 successful but when i try to connect to my wifi it just keep saying connecting... saved wpa2 and wont connect ...anyone can help pls .
i tried two other alroger rom an same problem ......wifi was working on both gingrbread and overcome rom
Click to expand...
Click to collapse
Wipe cache first before flashing cm 10.1

I went into recovery wipe cache ,wipe devilk then i flashed cm 10.1. First flash i got touchwiz then i flashed two times more then i flash gapp and reboot system did i do anything wrong
Sent from my GT-P1000 using xda app-developers app

pretty sure you meant TWRP recovery.
Touchwiz is a Samsung stock launcher.
Your step seems correct.
You should be trying to capture the log.
read more on logcat.

zadia24 said:
i have restock using gb stock safe flashed overcome kernel went all the way to overcome rom and then flashed alrogers latest cm 10.1 successful but when i try to connect to my wifi it just keep saying connecting... saved wpa2 and wont connect ...anyone can help pls .
i tried two other alroger rom an same problem ......wifi was working on both gingrbread and overcome rom
Click to expand...
Click to collapse
Turn off and turn on your modem wifi