[Q] No ROMs booting, did I miss something? - Nook HD, HD+ Q&A, Help & Troubleshooting

I followed the instructions in the General Discussion forum and was able to install CWM 6.0.3.6 and install CM 10.1.3 official, yet it always just hangs on the boot logo and stays there forever. Did I miss something? I've tried other ROMs and they do the same thing. I tried clearing the cache in the recovery but it doesn't work. Any advice?

Ok I found out that it's not reading or doing something correctly in CWM. When i go to wipe data/factory reset it says Error mounting /data! skipping format, it also says that about /sdcard as well
EDIT - Wow now I can't even restore because it says MD5 mismatch... what the hell? What a piece of ****.

Related

G1 Won't Get Past Boot Screen

Here's the scenario:
Been running CM4.2.15.1 with Amon_RA's recovery v1.6.2 & default(?) SPL.
Nandroid backup.
Wiped data/factory reset.
Tried to flash OpenEclair1.2.2. Got error:
Code:
E: Can't symlink /system/xbin/bb/dirname
E: FAilure at line 73:
symlink /system/xbin/busybox SYSTEM:xbin/bb/dirname
So I wiped again and tried to Nandroid restore.
After "restore," I keep getting stuck on the "T-Mobile G1" screen after waiting 10ish minutes. Any suggestions? Am I not waiting long enough?
Did I "brick" my phone?
Well, you wiped to flash OpenEclair which currently requires the Danger spl (or you can create proper symlinks). Since you wiped and then tried to flash a rom onto your phone which formats the /system partition (here Android resides), I'm thinking you should reflash Cyanogen (after flashing the Htc Recovery of course).
So when I did the factory reset, that means I got rid of the "htc recovery"? The Amon_RA recovery is still working for me though.
EDIT:
So I've wiped again and tried to reflash the CM but again it's still stuck at the "G1" screen. Should I wipe dalvik? I don't understand why my nandroid restore isn't working..
atolar said:
So when I did the factory reset, that means I got rid of the "htc recovery"? The Amon_RA recovery is still working for me though.
EDIT:
So I've wiped again and tried to reflash the CM but again it's still stuck at the "G1" screen. Should I wipe dalvik? I don't understand why my nandroid restore isn't working..
Click to expand...
Click to collapse
The HTC recovery, as in the thing you flashed before you first flashed Cyanogen. I have always done this and I'm pretty sire that Cyanogen does not boot without having flashed the HTC recovery on a new flash (As in coming from another rom)
I can't load my phone to mount my sd card to put those files onto my phone..? I've been flashing roms all the time but I feel like a noob right now.
EDIT:
Oh it's a simple "push". Sorry, freaking out here is all.
EDIT:
successs!! turns out I needed to flash the "base" as described in http://wiki.cyanogenmod.com/index.php/Upgrading_From_Older_CyanogenMod_or_other_rooted_ROMs
Thank you so much for your help!

Tab bricked, CWM Recovery - Read-only file system issue

Hello all,
I have an issue with latest CWM 5.5.0.4 recovery. It says the following error:
E:Error in /cache/recovery/last_log
(Read-only file system)
and other similar errors:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
and I'm unable to reflash GalaxianSoup ROM nor restore the original backed up 3.2 factory rom.
What actually happened ?
Once bought, I managed to root, flash CWM 5.5.0.4 recovery and install the latest GalaxianSoup ROM. Everything based on the guides in development forum and successful (all latest versions). All cool! System was working fine.
Yesterday, I was using tablet, installed few apps, nothing special and later left tablet turned on and charging. When I came back, it was turned off. Okay, tried to turned on, but the system never booted and always looped (seeing only Google logo and moving gears). I rebooted into recovery and noticed the error (see above).
Now, I'm basically unable to do anything. I tried to wipe data, cache and Dalvik cache several times, and reflash GalaxianSoup again (Galaxian + Gapps) or also restore the 3.2 system backup that I've made (always fails).
I've read on some other forums that it might have something to do with damaged SD card partition or something.
I'm out of ideas. Can anyone help me pleeeeease?
EDIT: I've got european Samsung Galaxy Tab 8.9 16GB WIFI version.
EDIT: I must correct myself. After rolling back to factory rom, I was experiencing the same issues, seems there some hardware issue. I sent the tablet back for repair, seems now it had nothing to do with GalaxianSoup. No need to worry, keep up the good work.
whiplash84 said:
Hello all,
I have an issue with latest CWM 5.5.0.4 recovery. It says the following error:
E:Error in /cache/recovery/last_log
(Read-only file system)
and other similar errors:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
and I'm unable to reflash GalaxianSoup ROM nor restore the original backed up 3.2 factory rom.
What actually happened ?
Once bought, I managed to root, flash CWM 5.5.0.4 recovery and install the latest GalaxianSoup ROM. Everything based on the guides in development forum and successful (all latest versions). All cool! System was working fine.
Yesterday, I was using tablet, installed few apps, nothing special and later left tablet turned on and charging. When I came back, it was turned off. Okay, tried to turned on, but the system never booted and always looped (seeing only Google logo and moving gears). I rebooted into recovery and noticed the error (see above).
Now, I'm basically unable to do anything. I tried to wipe data, cache and Dalvik cache several times, and reflash GalaxianSoup again (Galaxian + Gapps) or also restore the 3.2 system backup that I've made (always fails).
I've read on some other forums that it might have something to do with damaged SD card partition or something.
I'm out of ideas. Can anyone help me pleeeeease?
EDIT: I've got european Samsung Galaxy Tab 8.9 16GB WIFI version.
Click to expand...
Click to collapse
Flash your recovery again through odin..
Then reflash your galaxian soup..
If not success, use odin and flash stock rom..
Dont forget backup your file from sdcard just in case if you need reset factory..
suwandiapr said:
Flash your recovery again through odin..
Then reflash your galaxian soup..
If not success, use odin and flash stock rom..
Dont forget backup your file from sdcard just in case if you need reset factory..
Click to expand...
Click to collapse
Flashing of CWM didn't help to fix the issue, installing of GalaxianSoup didnt work at all (corrupted ZIP file error...)
Thanks God, reflashing of stock ROM via Odin did work, tablet is up and running. GalaxianSoup is definitely not stable enough yet, I'll stick to the stock rom fora while. Thank you!
whiplash84 said:
Flashing of CWM didn't help to fix the issue, installing of GalaxianSoup didnt work at all (corrupted ZIP file error...)
Thanks God, reflashing of stock ROM via Odin did work, tablet is up and running. GalaxianSoup is definitely not stable enough yet, I'll stick to the stock rom fora while. Thank you!
Click to expand...
Click to collapse
Galaxian Soup is more then stable enough. Bad flashes happen and you just said you had it up and running.
bdfull3r said:
Galaxian Soup is more then stable enough. Bad flashes happen and you just said you had it up and running.
Click to expand...
Click to collapse
To be honest, it is kind of stable, but not enough, hence the beta label. Some further optimizing will be done once the team has ICS source. In my experience, it was stable, but sometimes it would turn off when in fell into Deep Sleep state. Now, the AOKP milestone 5 is giving me issues with the screen rotation. I've experienced both sides, AOSP and AOKP in their latest versions. Obviously there is more room for improvement, but I'm afraid the team is kinda stuck without source. They've done miracles without source though.

A bundle of problems when trying to flash...

Hello, everyone. This is my first post so excuse my newbliness, if any is noticed...
I've been trying to flash my Mini for quite a while and all I got was a series of epic fails. The ROM that I was trying to flash is the Unofficial CyanogenMod 10, by rohan007; to be more specific, Unofficial CM10_15-12-12, which is the latest update, I think. I was using Cyanogenmod Recovery Image 5.0.2.6-tass which worked quite fine, giving me the advanced options and everything, but each time I would try to install zip from sd, I would get the following error:
~some incomplete log text above, not sure if it matters~
/E:Error in /sdcard/customrom/CM-10_15-12-12.zip
(Status 7)
Installation aborted.
Of course, I followed the exact instructions on how to flash a custom ROM; Clear cache partition, Wipe Data/Reset, Clear Dalvik Cache, etc...
My phone is rooted, by the way. I used the universal_gb_root_v25.zip to root my phone, since it was the only method that worked.
Then, after further investigation, I found out that the image version 5.0.2.6 sometimes fails to intall a custom ROM. So, I found the ClockWorkMod Touch Recovery Lilg Version for Galaxy Mini, CWM TOUCH 5.2.0.8 version. And when I flashed it, I just got "Install from sdcard completed" log message. Since I didn't got any advanced options, I tried to flash the ROM by selecting the option to apply update from sdcard and yet again, I got the following error:
~again, some incomplete log text above, not sure if it matters~
E:Error in /tmp/sideload/package.zip
(Status 7)
Installation aborted.
Then, when I rebooted my system, my phone got stuck on the Samsung GALAXY mini GT-S5570I text and now, every time when I press the power button, it keeps doing the same! I'm seriously getting frustrated here... Anyways, I can only go to the Android system recovery, and the Cyanogenmod system recovery and that is it. Also, I can still manipulate my data from the sd card. (Move and remove files from it, I mean).
One more thing about the Android system recovery. Now I get the log text saying:
-- Appling Multi-CSC --
E:failed to mount /system (Invalid argument)
E:failed to mount /system (Invalid argument)
And obviously, I did something(s) wrong in the whole process, so I beg you to help me resolve this issue. Thank you.
If you need any additional data about the whole bundle of problems, I will be more than glad to post them in my next reply.
see if odin detects your phone, and reflash cwm.
yackovsky said:
see if odin detects your phone, and reflash cwm.
Click to expand...
Click to collapse
ODIN MODE works, reflashing only works with image version 5.0.2.6...
As far as I know ...
we can't flash CWM in GT-S5570i
we can use in temporary only ....
this mean we can use CWM 5.0.2.6 in CWM mode and after reboot the phone goes into original CWM mode.
What I would u to do is ...
If u can go into CWM recovery mode then wipe data / Factory reset
if this doesn't help ...
Go into download mode and flash with original firmware using ODIN ...
shwe said:
As far as I know ...
we can't flash CWM in GT-S5570i
we can use in temporary only ....
this mean we can use CWM 5.0.2.6 in CWM mode and after reboot the phone goes into original CWM mode.
What I would u to do is ...
If u can go into CWM recovery mode then wipe data / Factory reset
if this doesn't help ...
Go into download mode and flash with original firmware using ODIN ...
Click to expand...
Click to collapse
For the CWM, I know. You have to flash it every time on reboot on the android system recovery to get it working.
I tried with factory reset several times and that did nothing. Download mode, also nothing.
So the best solution for me would be to find the stock firmware on the internet and flash that. I'll tell you how that went...
Also, when I try to format system, I get an error: "Error mounting /system! Skipping format... Done"
So for the future, is there any other way, besides CWM, to do a full, complete wipe of the Android OS?
Don't flash gts5570 roms on gts5570i for gawds sake, unless you want to brick your phone...
yackovsky said:
Don't flash gts5570 roms on gts5570i for gawds sake, unless you want to brick your phone...
Click to expand...
Click to collapse
Eh... It's too late for that now... Darn it. Any good methods on how to unbrick it? And, can I take it to the service shop to let them fix it?
Symeonus said:
Eh... It's too late for that now... Darn it. Any good methods on how to unbrick it? And, can I take it to the service shop to let them fix it?
Click to expand...
Click to collapse
if your phone gets detected by odin, just flash any official firmware from samfirmware.com and it's done. if not, hopefully you're still under warranty, then only samsung service center can help you. play dumb, don't mention rooting, flashing, custom roms and such...
yackovsky said:
if your phone gets detected by odin, just flash any official firmware from samfirmware.com and it's done. if not, hopefully you're still under warranty, then only samsung service center can help you. play dumb, don't mention rooting, flashing, custom roms and such...
Click to expand...
Click to collapse
YAY! I UNBRICKED MY PHONE! All is working just fine. Now then, if anything gets seriously wrong, I know what to do. Thank you, yackovsky, for your help.
It seems that all of those errors were caused by me trying to flash GTS5570 ROM on GTS5570I.

[Q] Updated to CM from Stock Need Help Restoring

I have an S5830D that I flash an CM7 rom to (APOCALYPSE-FINAL), I'm now looking at getting back to stock. I'm having trouble getting my CWM restore back. Now after doing some searching I realized I would need to flash a stock firmware version through odin. I went out and found what i believe is the correct firmware version for this Koodo model (the name is S5830DTLKI4_S5830DTLSKI4_S5830DTLKI4_HOME.tar.md5) and tried to flash it.
Everything in odin goes through fine up to the point where it restarts the phone, Ill attach a screenshot of what shows up for me. After the screen shows up is when I get stuck in a bootloop where the phone model shows, then the koodo bootanimation shows followed by the samsung logo. I should note though I still have complete access to recovery, the downloader mode, and even the CM rom when i restore that backup. The fact I have access to all those gives me hope as I'm sure this could be reversed.
Any advice on how I can restore this phone to stock would be greatly appreciated. I'm not very familiar with samsung devices so please try to be patient with me as I realize I have gotten into something over my head.
PS Sorry about the glare on the image its the best I could do as it disappears quickly.
Jeklund said:
I have an S5830D that I flash an CM7 rom to (APOCALYPSE-FINAL), I'm now looking at getting back to stock. I'm having trouble getting my CWM restore back. Now after doing some searching I realized I would need to flash a stock firmware version through odin. I went out and found what i believe is the correct firmware version for this Koodo model (the name is S5830DTLKI4_S5830DTLSKI4_S5830DTLKI4_HOME.tar.md5) and tried to flash it.
Everything in odin goes through fine up to the point where it restarts the phone, Ill attach a screenshot of what shows up for me. After the screen shows up is when I get stuck in a bootloop where the phone model shows, then the koodo bootanimation shows followed by the samsung logo. I should note though I still have complete access to recovery, the downloader mode, and even the CM rom when i restore that backup. The fact I have access to all those gives me hope as I'm sure this could be reversed.
Any advice on how I can restore this phone to stock would be greatly appreciated. I'm not very familiar with samsung devices so please try to be patient with me as I realize I have gotten into something over my head.
PS Sorry about the glare on the image its the best I could do as it disappears quickly.
Click to expand...
Click to collapse
If you have complete access to recovery mode, try wiping data and cache after flashing with Odin. That does the trick for me when I have a bootloop after flashing with Odin.
ImSoBored said:
If you have complete access to recovery mode, try wiping data and cache after flashing with Odin. That does the trick for me when I have a bootloop after flashing with Odin.
Click to expand...
Click to collapse
Agreed... reboot into recovery and clear cache and dalvik cache and then reboot.
So I've just completed a new flash with odin, I went in and flashed cwm then proceeded to factory reset, wipe cache, wipe dalvik, and I even do battery reset. Every wipe goes fine except for when I attempt to do the factory reset I received the following error:
Code:
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p2
Even after those wipes it still bootloops but thats most likely as the factory reset didn't work.
Jeklund said:
So I've just completed a new flash with odin, I went in and flashed cwm then proceeded to factory reset, wipe cache, wipe dalvik, and I even do battery reset. Every wipe goes fine except for when I attempt to do the factory reset I received the following error:
Code:
E:format_volume: make_extf4fs failed on /dev/block/mmcblk0p2
Even after those wipes it still bootloops but thats most likely as the factory reset didn't work.
Click to expand...
Click to collapse
Try not using CWM, or your SD card may be corrupt and you have to format it, I'm not sure though.
ImSoBored said:
Try not using CWM, or your SD card may be corrupt and you have to format it, I'm not sure though.
Click to expand...
Click to collapse
That did it, for some reason I had this thought in my head I had to flash cwm right away and clear stuff that way. Once odin finished I went in recovery and wiped data and cache through the stock recovery and it booted right up. Thanks for the help really appreciate it.

[Q] Galaxy S Plus black screen, CWMrecovery says "can't mount...

I'm a noob I know and yes I watched the noob-video. But I need help! Cuz I'm too dump! So please help me
I wanted to update my Galaxy S Plus to the newest CM 10 (Beta 4) (before it was the Beta 3) over the CWM recovery it suddenly says
"symlinks failed"
"error in /sdcard/cm-10-20130324-invendor-beta4-ariesve.zip"
"(Status 7)"
"installation aborted"
so I looked to the CWM recovery and I saw that I don't have the latest version....okay I downloaded the latest one and installed it over the CWM recovery. The same error .... with friends. Now I got when I went into the CWM recovery: (after I tried to wipe data/factory reset or wipe cache)
"E:Can't mount /cache/recovery/log"
"E:Can't open /cache/recovery/log"
"E:Can't mount /cache/recovery/last_log"
"E:Can't open /cache/recovery/last_log"
I tried to restart the phone...black-screen after the samsung cyanogen mod screen.
Okay
So I tried to flash a older firmware "I9001XXKQ7_I9001DBTKP2_I9001XXKPK_HOME.tar.md5" with Odin. I restarted the phone...nope black screen. I installed the newest CWM recovery again and tried to flash again the CM 10. Black-screen. So I tried the old version of the CM which I had before (Beta 3) -> black-screen and still errors in the recovery mode.
I can still go into the download mode and the recovery mode. The charging symbol is not working when i connect it (just the battery but bot moving)
My device:
Samsung Galaxy S Plus
Provider: Vodafone IT
ROM: CM 10 (Beta 3) installed but not working
Kernel: Phenom 3.2 UV (updated after the symlinks failed error)
I hope some genius out there can help me
And sorry for my bad english...I don't use it often (Italy)
Follow my HOW TO Guide at Bottom till you get to Flash CM 10 and use the one you want
Remember Use PIT and Re-Partition to Flash 2.3.6..then Root then use yours!
Will clear up any errors you may have
Thanks!
Hey! Thanks a lot! I'll try it out and report it if its working :good:
EwOkie said:
Follow my HOW TO Guide at Bottom till you get to Flash CM 10 and use the one you want
Remember Use PIT and Re-Partition to Flash 2.3.6..then Root then use yours!
Will clear up any errors you may have
Click to expand...
Click to collapse
!!!!!!!!
dont download the files there!
i think they are for i9000, but the thread starter has an i9001
!!!!!!!!!
have you tried to flash a recovery like CWM 5.x.x.x via odin? it is stable. i think it is linked in the i9001 development at the CM9 Rom by arco
edit: just found
http://forum.xda-developers.com/showthread.php?p=39640245
Regards
Okay
Okay! I didn't do it yet sooo ... I'll try that one and thanks for the link! :good:
then...?
"have you tried to flash a recovery like CWM 5.x.x.x via odin? it is stable. i think it is linked in the i9001 development at the CM9 Rom by arco"
I flashed the CWM recovery via odin, I could format now tho folders and mount them again, but the recovery always freezes when I wanna format the user data. Why? and what should I do as my next step?
Imanidiot said:
I flashed the CWM recovery via odin, I could format now tho folders and mount them again, but the recovery always freezes when I wanna format the user data. Why? and what should I do as my next step?
Click to expand...
Click to collapse
take your time...
what errors does the cwm 5.5.0.4 recovery shows without doing anything?
try to additionally mount system and data partition (see under <mount and storage>)
then click on wipe data/factory reset in the main menu
Hi everybody I'm new.
My situation is exactly the same, I did the same things, got the same problems... got stuck with no solutions yet if not to send it to samsung assistance.
Flashad many other android phones in the past and never had issues like this... it's a nightmare...
try to additionally mount system and data partition (see under <mount and storage>)
then click on wipe data/factory reset in the main menu
Click to expand...
Click to collapse
Without doing anything the recovery says nothing....just the normal main-screen.
After I mounted system and data I click on wipe data/factory...but then it doesn't do anything. It freezes after "Formatting /data..."
I flashed the FeaMod Recovery v.1.2. based on CWM v5.0.2.7
Imanidiot said:
Without doing anything the recovery says nothing....just the normal main-screen.
After I mounted system and data I click on wipe data/factory...but then it doesn't do anything. It freezes after "Formatting /data..."
I flashed the FeaMod Recovery v.1.2. based on CWM v5.0.2.7
Click to expand...
Click to collapse
I also tried the broodROM RC5, succesfully flashed with Odin but still the same problems as before.
Can't format /data.
Stock-Firmware
I am trying to flash now the latest stock firmware with Odin...hopefully it will work.... Still waiting for other ideas :/
Imanidiot said:
I am trying to flash now the latest stock firmware with Odin...hopefully it will work.... Still waiting for other ideas :/
Click to expand...
Click to collapse
I already did that too but it didn't work...
I'm gonna go to the samsung assistance in the afternoon... :crying:
Well....Nothing is working...Anyone who could help me? ... Or better us..
If my guide is no use to you as its for i9000 : try this HERE
If that helps you in any way let me know.
I did this already... I flashed it with the newest stock-FW but it doesn't do anything...and the stock-recovery can't make a factory reset. It always freezes....
other things that could be worth a try:
try flashing different recoveries - not only feamod... also cwm,...
for me cwm5.5.0.4 works
look: our wiki-page -> un-brick
if all doesnt help you could try to reset all partitions
I tried already a few recoveries...like the CWM or the TeamWin... How can I reset them? Can you give me a link please? ^^
Flash BroodROM RC 5... flash this multiple times without touching any buttons like repartion etc..
After that, wipe system and data via the recovery provided in the ROM.
Then flash the newest stock FW from samsung..
This solved all my issues multiple times xD
thanks for the reply, but my phone is now finally brocked....it doesn't even start....and I don't have any idea what i can do now...
??
So, now Samsung, no Samsung Galaxy S Plus GT-I9001? No nothing. Not even the soft brick image (see wiki)

Categories

Resources