Related
Ok seems many usrs here have the same problems over and over again. so heres a tut!
This will probably cover many other topics but simplified here as much as i can.
You Must have the following to get this to work:
ROOT
Recovery 5.0.2.6
busybox installed.
if you have non of these...do not attempt any of this thread till you have!
To start with.
Creation of EXT3 Partitions.
you will need Minitool Partition Wizard. Mini Tool Partition Wizard Download
This is a harddrive/diskspace program allowing accurate modification of disk space.
Never create an EXT3 in CWM, as this will create whats known as a swap drive.
this causes the bootloop. Hence the non boot!
EXT3 has to be set as primary drive not logical.
Size allowance recommendations (personal choice, but this is after a few findings and results given by Salsa users)
SD Card Size.................................EXT3 Size
2GB......(Class 2).............................250MB
4GB......(Class 2-4)..........................500MB
8GB......(Class4-6)...........................500MB-1GB
16GB....(Class8-10).........................1.2GB
WARNING, anything over 1.5GB will result in serious problems and SD damage
This also works around class types of SD Card. the higher the class the faster it works, there are various brands offering different class cards, find a fast and big card for best performance. I currently use Class 8 16GB with 1GB Ext3 with little/no lag
Wise idea before this to make an SD backup, if done correctly your data will not be affected...if you screwed up...you'll loose everything...so back it up!
To start with,
Remove Sd Card and use and SD Reader and insert into your computer USB Slot.
Open Minitool Partition Wizard.
Resize your sd card accordingly leaving 1.2-1.5gb of unallocated space. Apply the actions.
Now you have the unallocated space, reformat the space in EXT3 and set as Primary drive. Apply Actions.
Now normally the Application throws your sd out and says bad drive......this is sometimes normal so don't panic.
Reinsert your Sd in Phone and boot into recovery only
Data2sd script
theres 2 scripts available for these roms.
htc-data2sd-ext3 or data2whatever by m1ndh8x4r.
2.1 Roms work well with htc-data2sd-ext3 script with no problems.
data2whatever works really well with 3.5 sense Roms (Bens/M1nds)
*****There is a warning with this data2whatever script....When using this script, you will notice after a short period, that you cannot update or install any more apks. This is due to a Dalvik error within the script on Deodexed roms, currently it cannot be fixed, you have been warned*****
these can be used easily but the following rules must be applied.
You must flash the rom firstly by the 3 wipes...regardless!
flash the rom as normal and reboot full, letting the rom fully build it self and load up... ie input your details/sign in wifi etc.
check it out for a few mins while your waiting...hey even make a backup lol!
OK now reboot in recovery and flash the chosen script....DO NOT WIPE ANYTHING!
once flashed reboot normally.
it will boot, it may take up to 5-10mins but it will boot. if by any chance you a boot loop at the boot animation screen then you have an EXT3 fault and you must redo the EXT3 Partition in Minitool to proceed again.
data2sd scripts are here>
http://www.mediafire.com/download.php?duigp9ky9796b65 for htc-data2sd-ext3.zip
http://www.mediafire.com/download.php?m7bv6pk024p63ef for d2extv0.43.zip (New/Advanced)
http://www.mediafire.com/download.php?qr5rh2fho1hnbnl for data2whatever
This is a proven way and so many have tried and failed other ways.
Please try this guide. If you get stuck please just ask!
Please Answer my poll at the top and Thank this post...Ty!
If you Answer NO to this guide, please post below and tell me why so i may help further
Heyy it worked thanks man
BigBearEvo said:
Open Minitool Partition Wizard.
Resize your sd card accordingly leaving 1.2-1.5gb of unallocated space. Apply the actions.
Now you have the unallocated space, reformat the space in EXT3 and set as Primary drive.
Click to expand...
Click to collapse
Trying to do this with fdisk on linux
It works but runs slowly for some reason
I have a 2GB cards, first partition is about 1.4 for normal /sdcard the remaining .4GB for /data
Both partitions are start aligned on 2048 sectors
Issue - applications get corrupted after restart
I am facing strange issue. I did everything described above and have /data on sd. But everytime I reboot something happens to most apps. They are installed but when I try to launch any of them I got errors and application closes. I need to reinstall EVERY app and they work until next reboot. Any ideas about the cause or what to check ? At this point I am trying not to discharge or reboot my phone by it;s impossible to keep it that way.
procek said:
I am facing strange issue. I did everything described above and have /data on sd. But everytime I reboot something happens to most apps. They are installed but when I try to launch any of them I got errors and application closes. I need to reinstall EVERY app and they work until next reboot. Any ideas about the cause or what to check ? At this point I am trying not to discharge or reboot my phone by it;s impossible to keep it that way.
Click to expand...
Click to collapse
thats a rom issue.
What rom are you running?
Are you using a Data2sd script? if so which one?
Are you using links2sd?
BigBearEvo said:
thats a rom issue.
What rom are you running?
Are you using a Data2sd script? if so which one?
Are you using links2sd?
Click to expand...
Click to collapse
I am running standard HTC ROM 1.12.401.2 With Sense 2.1.
I used ext3 version of script.
No. Shall I ?
procek said:
I am running standard HTC ROM 1.12.401.2 With Sense 2.1.
I used ext3 version of script.
No. Shall I ?
Click to expand...
Click to collapse
no dont lol...ok sounds a bit stupid but have u got root? because what your describing is and apps2sd thing...which u cant get on stock rom....but if u dont have full root....then this sort of thing does happen....or...you got a faulty ext3 partition...
questions next...
which guide did u make ext3?
size and did u make swap?
root?
Need file name of the data2sd script u used and how u used it...(this is important)
so i need full break down....assuming u have root that is....this almost sounds like a silly problem, but then most of us don't use stock roms anymore....so we dont have this problem lol
BigBearEvo said:
no dont lol...ok sounds a bit stupid but have u got root? because what your describing is and apps2sd thing...which u cant get on stock rom....but if u dont have full root....then this sort of thing does happen....or...you got a faulty ext3 partition...
questions next...
which guide did u make ext3?
size and did u make swap?
root?
Need file name of the data2sd script u used and how u used it...(this is important)
so i need full break down....assuming u have root that is....this almost sounds like a silly problem, but then most of us don't use stock roms anymore....so we dont have this problem lol
Click to expand...
Click to collapse
Of course I have a root - it works perfectly. I created the partition according to above instructions (I mean this thread). My ext3 partition is about 800 MB and 3200 MB is for FAT32. I did not create swap - just fat32 and ext3 with Partition Wizard. I used htc-data2sd-ext3.zip in I think normal way - phone reset, installing busybox, reboot, installing script with recovery - done. Everything is perfect until next reboot.
procek said:
Of course I have a root - it works perfectly. I created the partition according to above instructions (I mean this thread). My ext3 partition is about 800 MB and 3200 MB is for FAT32. I did not create swap - just fat32 and ext3 with Partition Wizard. I used htc-data2sd-ext3.zip in I think normal way - phone reset, installing busybox, reboot, installing script with recovery - done. Everything is perfect until next reboot.
Click to expand...
Click to collapse
sounds like a problem with your rom my friend....hard to tell without seeing it really...
have you thought about changing the rom itself?
BigBearEvo said:
sounds like a problem with your rom my friend....hard to tell without seeing it really...
have you thought about changing the rom itself?
Click to expand...
Click to collapse
To this moment no. But if there's no other option I will probably have to...
procek said:
To this moment no. But if there's no other option I will probably have to...
Click to expand...
Click to collapse
either that or find your ruu and reinstall stock again!
Funny thing
I used my previous card (smaller - just 2 GB) and there's no such behaviour as with my 4GB. Smaller one is Sandisk, bigger one is Kingstone - both known for good products. So switching ROM is rather not an option. There's something about SD but I can not figure out what...
Pls help
I have created 6gb of fat32 and copied ROM and data2sd-ext3.zip then formatted remaining 1gb space in ext3. When I tried to install zip from recovery mode it throws "E: can't mount /sdcard/"
pls help
Thx
yuva0103 said:
I have created 6gb of fat32 and copied ROM and data2sd-ext3.zip then formatted remaining 1gb space in ext3. When I tried to install zip from recovery mode it throws "E: can't mount /sdcard/"
pls help
Thx
Click to expand...
Click to collapse
how did you make the partitions? and are they set as primary?
what class sd card is it? you need a class 8 or 10 on that size.
I used mini tool for partition. I set fat32 as logical and ext3 as primary. I have 8gb class 10 SD.
Sent from my HTC Salsa C510e using XDA
Shrink the ext3 to 750mb and set all partitions as primary.
BigBear is using Xparent Tapatalk Purple
Yep now I can see my data in SD card. Another problem I triple wiped and flash arc rom again, and given detail/sign in. When trying to flash script in recovery mode, it asks for busybox in some sys folder. I don't have busybox and also script installed, but ext3 memory not reflects in as main memory. Am I used different script or I need to install busybox, if so how to do that.?
I installed busybox @ system/xbin and flashed script, it worked. Finally my internal memory problem solved:thumbup:
I request to add installing busybox step and download link for script in tutorial.
Thx bb
Sent from my HTC Salsa C510e using XDA
I used data2sd without without any problem for past two days, suddenly today some apps force closing. Instagram app show error msg like"unfortunately this device's filesystem is reporting a problem." and pointing to this url "bit.ly/igfilesystem".
pls help.
I'm using arc V2 ROM, class 10 8gb sd, with 750mb of ext3.
yuva0103 said:
I used data2sd without without any problem for past two days, suddenly today some apps force closing. Instagram app show error msg like"unfortunately this device's filesystem is reporting a problem." and pointing to this url "bit.ly/igfilesystem".
pls help.
I'm using arc V2 ROM, class 10 8gb sd, with 750mb of ext3.
Click to expand...
Click to collapse
contact instagram with a logcat or report for them to check
hey guys i came back after a while .. and i really need some help and got things to ask , first of all ... i am using my phone to post this msg n checking evrry thing on xda my laptop is dead so cant properly search evrrything from.phone so here is what i want help with
1st....
i bought lexar 32gb class 10 mem card... i havnt used it right now coz as i remem cwm5 only formats in ext3 so how can i format in ext4 from my mobile and keep it that way to install a new rom coz evrytime or while installing or wiping cwm gona change sdext to ext3 ... i knw i can use pc but i dont have it so need to know how to do it fully from.phone to use link2sd or s2e
2nd...
Man develpmnt section seems to be on fire their are so.mannnnnnny Roms out their so i need to ask few thing i know the rules n.m.not askin best rom ... as i cant surf fully through ma phone every single page of roms ... i need to ask is
a) is cm9 by maclaw good for daily life ryt now ? i watch lots of videos.. n litsn.music... n play games is it porperly workng up to it ?
b) their is apocalypse and lewa RoM n official cm7 I saw n damn soo many Roms as i cant download and try them all.through my phone. so.... whAt I wana knw about these is which is most upto date i mean new sorces libs n with battry life.. blabla stuff which i dont knw coz m.not frequntly visting xda right now and dont know what is comming out n goin on ... so if you guys can tell me which i shoud try first ...
btw i am.on.miracle v4 right now but i wana change n try smthin new coz i think their are lots of changes since miracle4 i guess
In your System/etc/init.d you'll find the mount script for link2SD, changing the text that reads 'ext3' or whatever to 'ext4' will allow you to mount as ext4 (assuming you already have an ext4 partition).
But, you cannot create an ext4 partition with cwm. Ext3 I've found to be just as good, and cwm does it for you (which also sucks if you ain't got your computer, since it'll wipe your SD card, so you need a backup)
Roms, check latest apocalypse, aa, lewa. Cm9 is beautiful, but I couldn't keep it for daily use cuz of battery drain and the random fc while using multiple apps.
cm9 is smooth and stable enough for me to use for daily. I also recommend you to try AA, it is very fast,unfortunately the author discontinued the rom,so there are a few bugs. In my opinion it is the fastest rom, here is the link:
http://forum.xda-developers.com/showthread.php?t=1744123
Sorry for my English
Sent from my brain using my GT-S5830
dxppxd said:
In your System/etc/init.d you'll find the mount script for link2SD, changing the text that reads 'ext3' or whatever to 'ext4' will allow you to mount as ext4 (assuming you already have an ext4 partition).
But, you cannot create an ext4 partition with cwm. Ext3 I've found to be just as good, and cwm does it for you (which also sucks if you ain't got your computer, since it'll wipe your SD card, so you need a backup)
Roms, check latest apocalypse, aa, lewa. Cm9 is beautiful, but I couldn't keep it for daily use cuz of battery drain and the random fc while using multiple apps.
Click to expand...
Click to collapse
hey thnks for reply i knw abt mount script but ques is about formating in ext4 and i dont have a prob with data loss coz card is new and olready empty .....
which of these roms are most uptodate ?
thanks
Marco Chung said:
cm9 is smooth and stable enough for me to use for daily. I also recommend you to try AA, it is very fast,unfortunately the author discontinued the rom,so there are a few bugs. In my opinion it is the fastest rom, here is the link:
http://forum.xda-developers.com/showthread.php?t=1744123
Sorry for my English
Sent from my brain using my GT-S5830
Click to expand...
Click to collapse
thanks for reply i guess ill try cm9 but seems as aosp of jellybeens gna be out so why not wait for it ?
and is AA uptodate sources wise ?
can anyone tell me about ext4 ? how should I do it from mobile?
busybox1 said:
can anyone tell me about ext4 ? how should I do it from mobile?
Click to expand...
Click to collapse
is there some answer to this? i have apokalypse final
busybox1 said:
can anyone tell me about ext4 ? how should I do it from mobile?
Click to expand...
Click to collapse
If you want to do it from phone,then first,mind that this will wipe your SD card. Boot into CWM,then advanced,then Partition SD card,now select EXT4 size,then it will ask yu for swap size,select 0mb,you are done
Prawesome said:
If you want to do it from phone,then first,mind that this will wipe your SD card. Boot into CWM,then advanced,then Partition SD card,now select EXT4 size,then it will ask yu for swap size,select 0mb,you are done
Click to expand...
Click to collapse
I thought cwm only partitioned ext3 format, how do you get it to do it in ext4?
How to changing internal memory with sdcard on samsung galaxy mini 2 :
1.Install Root Explorer.apk (Download link - http://www.4shared.com/file/oxh-EMSD)
2.You need to root your phone :
2.1 Download root.zip (Download link - https://www.dropbox.com/s/rpdtwzctlr0ny5r/Superuser-3.2-RC2-arm-signed.zip)
2.2 Copy file from link in your sdcard/internal memory
2.3 Go in recovery mode and click install zip from sd card or internal storage and install it
3.Open Root Explorer and click on Mount R/W then go in System/etc and click on vold.fstab and text viewer.
4.Find Dev_mount sdcard /storage/sdcard0 and Dev_mount sdcard /storage/sdcard1. Change sdcard0 with sdcard1.
5.Reboot system and u are rdy
Use link2sd apk..
Create partition from sd card...
Load ur link2sd apk.create mount then reboot..set automatic linking from link2sd on settings..
You ready to go
Sent from my GT-S5570 using xda app-developers app
and2nckiko said:
Use link2sd apk..
Create partition from sd card...
Load ur link2sd apk.create mount then reboot..set automatic linking from link2sd on settings..
You ready to go
Sent from my GT-S5570 using xda app-developers app
Click to expand...
Click to collapse
Dont work . Im with Jelly Bean 4.2.2 CM 10.1 .
Yes it does..it works on me on every diffrent jb that i flashed b4 and so on
Sent from my GT-S5570 using xda app-developers app
bek4o0 said:
Dont work . Im with Jelly Bean 4.2.2 CM 10.1 .
Click to expand...
Click to collapse
You're in luck. Recently a good s2e for 4.2.2 has been developed (But the game data your talking wont be a problem, because game data is anyway saved on your sd card)
First in CWM go to Advanced>>partiton sd card>>(choose your partition size but depending on your sd card size choose a suitable value. For a 2gb Card dont choose more than 256 mb and so on)>>as for swap size if you have a card of class 6 or higher then only vreate one (for virtual RAM- you can find many guides online)
Download s2e from this link, it has a good ui for new learners so its no problem also.:laugh:
Link - http://forum.xda-developers.com/showthread.php?t=2061682
Link2sd also works without problem
Press thanks if i helped you
DeathMetal King said:
You're in luck. Recently a good s2e for 4.2.2 has been developed (But the game data your talking wont be a problem, because game data is anyway saved on your sd card)
First in CWM go to Advanced>>partiton sd card>>(choose your partition size but depending on your sd card size choose a suitable value. For a 2gb Card dont choose more than 256 mb and so on)>>as for swap size if you have a card of class 6 or higher then only vreate one (for virtual RAM- you can find many guides online)
Download s2e from this link, it has a good ui for new learners so its no problem also.:laugh:
Link - http://forum.xda-developers.com/showthread.php?t=2061682
Link2sd also works without problem
Press thanks if i helped you
Click to expand...
Click to collapse
I swap memory and again game data need to be in phone memory
You can try int2ext+.. Read about int2ext+ from here..
http://forum.xda-developers.com/showthread.php?t=1716124
Download fixed int2ext+ files from here (particularly for android 4.2.1+)
http://forum.xda-developers.com/showthread.php?p=37961204
it's perfect in my opinion..
vipinbp said:
You can try int2ext+.. Read about int2ext+ from here..
http://forum.xda-developers.com/showthread.php?t=1716124
Download fixed int2ext+ files from here (particularly for android 4.2.1+)
http://forum.xda-developers.com/showthread.php?p=37961204
it's perfect in my opinion..
Click to expand...
Click to collapse
When i go in recovery mode and click int2exit.zip , instalation abort
bek4o0 said:
When i go in recovery mode and click int2exit.zip , instalation abort
Click to expand...
Click to collapse
Did u have any link2sd or s2e or any such related scripts before installing this?
You must make sure there are no such scripts in the init.d folder.
I would suggest u do a fresh partitioning of your sd card, wipe your device and freshly install the ROM and then do the procedure for installing the script as mentioned in the original thread. And i suggest you use "fixed-int2ext+ for android 4.2..1". "Int2ext" (without "+") slows down the device.
Also, make sure you mount /system, /data and /sd-ext before flashing the script. And format /sd-ext after flashing the zip
Please tell me the procedure that you followed.
Let me know and I'll provide more detailed steps if you are not able to find them in the original thread.
vipinbp said:
Did u have any link2sd or s2e or any such related scripts before installing this?
You must make sure there are no such scripts in the init.d folder.
I would suggest u do a fresh partitioning of your sd card, wipe your device and freshly install the ROM and then do the procedure for installing the script as mentioned in the original thread. And i suggest you use "fixed-int2ext+ for android 4.2..1". "Int2ext" (without "+") slows down the device.
Also, make sure you mount /system, /data and /sd-ext before flashing the script. And format /sd-ext after flashing the zip
Please tell me the procedure that you followed.
Let me know and I'll provide more detailed steps if you are not able to find them in the original thread.
Click to expand...
Click to collapse
I wipe all and again dont install ((( and mount data system and sd-ext
bek4o0 said:
I wipe all and again dont install ((( and mount data system and sd-ext
Click to expand...
Click to collapse
Oh Sorry dude wish i could help u better.. did u try after re-partitioning sd card ??
hi
i havent use ext partion before. i trying a new rom which need ext pation. i watched a video about it and i flashed the rom.
i have some bugs.and some apps stop working. i couldnt write the roms thread(i m new). i sent personal mesage to the developer. i explane the problems but he said he didnt faced before. and wait for update.
i read all post for the rom but i didn see such kind of problem.so i think i have made a mistake about partion.
can partion couse this or what can be problem?
i m waitin for your ansfers...
(sorry for my english)
isn't any idea???
HearThief said:
isn't any idea???
Click to expand...
Click to collapse
which rom are you using? which script? how did you do your sd-ext partition?
Viper The Ripper said:
which rom are you using? which script? how did you do your sd-ext partition?
Click to expand...
Click to collapse
rom:Touchwiz Revolutionized 5.0 Rom-v2.0 my sd: team 16 gb micro sd
i have watched a video about it
as i said i try ext firs time and i cant answer about script. i have no idea about it.
HearThief said:
rom:Touchwiz Revolutionized 5.0 Rom-v2.0 my sd: team 16 gb micro sd
i have watched a video about it
as i said i try ext firs time and i cant answer about script. i have no idea about it.
Click to expand...
Click to collapse
well let's start again! you need to create an ext partition, use mini partition tools, here it is a tutorial http://forum.xda-developers.com/showthread.php?t=2142844, until point 11!... avoid the rest of them and finally install the rom following the instructions
Edit: the rom is using the int2ext script, so right "/data" partition is symlinked to your sd-ext partition, so maybe it is the problem
Viper The Ripper said:
well let's start again! you need to create an ext partition, use mini partition tools, here it is a tutorial http://forum.xda-developers.com/showthread.php?t=2142844, until point 11!... avoid the rest of them and finally install the rom following the instructions
Click to expand...
Click to collapse
i have ext partion.
i have created ext 4 with mini tool but i didnt use link2sd .
if i didt understand wrong, this methot moves the flashed roms. the rom i ask about flash directly sd (i think). because i couldn open the phone without partion. when i look memory i see the created part as phone memory. i couldnt understand about it. should i use link2sd in this case. if i do link2sd steps ,will the problems end?
HearThief said:
i have ext partion.
i have created ext 4 with mini tool but i didnt use link2sd .
if i didt understand wrong, this methot moves the flashed roms. the rom i ask about flash directly sd (i think). because i couldn open the phone without partion. when i look memory i see the created part as phone memory. i couldnt understand about it. should i use link2sd in this case. if i do link2sd steps ,will the problems end?
Click to expand...
Click to collapse
According what you said the script is working, so Link2sd is NOT neccesary.
Int2ext increase de internal memory, this script mount your sd-ext partiotin and link it with /data partition, so if you created a 512mb ext partition, you should see about 5120mb as internal memory.
The rom is under construction, you can also try to start again as I said you following all the steps
as you said i have same internal memory.
i ll follow all steps . should i create ex4 or ext2. I read ext4 is better for class10. and one more question will bugs end after this
HearThief said:
as you said i have same internal memory.
i ll follow all steps . should i create ex4 or ext2. I read ext4 is better for class10. and one more question will bugs end after this
Click to expand...
Click to collapse
If you have a class 6 or 10 sdcard make a ext4 partition, if not you can also use an ext4 partition but it will do a little slower your rom.
I can't guarantee that everything will work well, but It should, note that the rom as I said you before, is under construction so It've several bugs, you can try another rom CM10 by Mardon, Oldroid or Bieltv3 e.g. or a Stock based rom
I like this rom s wiev. I havent use ext portion and I want to learn .also I didn't see any bad thing about it.
When I see bugs I think I have made a mistake. Now I know what should I do. If won't work I'll try another.
You are very patient. Thanks alot.
(Sory for my bad english)
Hi Guys can anyone help me with partitioning the sd card on my galaxy ace 1.I have downloaded and installed the thunderbolt v4 rom "which I really like. Trouble is following various methods mini partition and apart inc . I cannot get the rom to see my sd card.
I have tried partitioning the ex4 before the fat 32 and after. and vis versa. but nothing enables the rom to see the second fat 32 partition. I have wiped the sd card "overnight and started afresh, still no go.
Thanks in advance for any adeas /help
bwizz60 said:
Hi Guys can anyone help me with partitioning the sd card on my galaxy ace 1.I have downloaded and installed the thunderbolt v4 rom "which I really like. Trouble is following various methods mini partition and apart inc . I cannot get the rom to see my sd card.
I have tried partitioning the ex4 before the fat 32 and after. and vis versa. but nothing enables the rom to see the second fat 32 partition. I have wiped the sd card "overnight and started afresh, still no go.
Thanks in advance for any adeas /help
Click to expand...
Click to collapse
Try partitioning via the following method then wipe data, cache and dalvik and then install the rom: https://www.youtube.com/watch?v=_U_Sp_BtzrM I'm sure the guy is using that rom and it works for him.
If not i can't really help apart from suggesting using "Super Stock" rom instead. It's very fast and stable and swap works perfect.
Thanks
Thanks I'll have to concentrate and try to go through it slowly. I don't remember seeing swap in the original rom installation instruction. or do I know what it is!
The battery life improvement of thunderbolt rom is one of the reasons it appealed to me . Does the super stock rom have good battery life?
Thanks Brian UK
bwizz60 said:
Thanks I'll have to concentrate and try to go through it slowly. I don't remember seeing swap in the original rom installation instruction. or do I know what it is!
The battery life improvement of thunderbolt rom is one of the reasons it appealed to me . Does the super stock rom have good battery life?
Thanks Brian UK
Click to expand...
Click to collapse
The version 4 specs of thunderbolt does say: "Kernel changed to Battery extender swapall v3 supersu 0.97"
So yes it should work. The Super Stock rom has a battery extender kernel too with cronmod (for swap).
I think in thunderbolt the swapall is enabled by default whereas in Super stock you have to choose the cronmod option during install of the rom.
Unfortunately i made a big boo boo with my ace and now it's a doorstop. If it was working i'd install thunderbolt so i could help better but i know for a fact superstock works perfect.
Formatting the sd in CWM is simple, format in fat 32 via pc first then put the sd in the ace, boot into recovery, go to advanced and choose "partition SD", select the size of the ext partition and on the next screen set it to "0m" and that should do the trick for thunderbolt.
With superstock and the mini tool i had setup 9gb of internal memory. I was loving it until i decided to try the Miui v4 rom. Do not touch that rom whatever you do!!!!!!!!
ta I'll give it a go and report back
Ok ta .Ill give it a go and report back
still same
Hi ,I tried as suggested , the max partition under clockwork was 4 gig, which I set "My card is 32gig"
I rebooted and still the same . Link to sd give the same script error ! I noticed the partition is ex2 . ! Thunderbolt is supposed to have ex4?.
Could the sd card be getting tired . it must be getting fed up with constant wipes etc
bwizz60 said:
Hi ,I tried as suggested , the max partition under clockwork was 4 gig, which I set "My card is 32gig"
I rebooted and still the same . Link to sd give the same script error ! I noticed the partition is ex2 . ! Thunderbolt is supposed to have ex4?.
Could the sd card be getting tired . it must be getting fed up with constant wipes etc
Click to expand...
Click to collapse
You shouldn't need to use a third party app like link2sd. LOL @ "it must be getting fed up with constant wipes". Although wiping does slowly decrease the life of an sd card, modern sd cards that are good makes have like 100,000 write cycles so your contribution is minimal. Why the sd is ext2 after formating with cwm i don't know. Which version of cwm are you using? Try the latest if you're not already using it. (just really stabbing at thin air but worth a try)
If that fails or if you're using the latest i can't really help any further with the thunderbolt rom and i'd bet you'd rather use more of that sd for internal anyway so as i suggested b4 go with the superstock rom. The mini tool definately works with that so you could partition more space.
I'm trying to find a an old fan speed controller i can use as a variable resistor to try and revive my phone. If it works i'll be able to help more with thunderbolt, depends on my luck.
bwizz60 said:
Hi ,I tried as suggested , the max partition under clockwork was 4 gig, which I set "My card is 32gig"
I rebooted and still the same . Link to sd give the same script error ! I noticed the partition is ex2 . ! Thunderbolt is supposed to have ex4?.
Could the sd card be getting tired . it must be getting fed up with constant wipes etc
Click to expand...
Click to collapse
mmm... "Thunderbolt is supposed to have ex4" It means all the device partitions are in .ext4 and yeah it support .ext4 as external partition
@Way333 AFAIK there is NOT Thundebolt kernel for GT-S5830 but rather GT-S5830i
ex4
Does that mean that there should be no fat32 for media files? How would I imput them then if the computer could not see the partition?
Viper The Ripper said:
mmm... "Thunderbolt is supposed to have ex4" It means alle the device partitions are in .ext4 and yeah it support .ext4 as external partition
Click to expand...
Click to collapse
bwizz60 said:
Does that mean that there should be no fat32 for media files? How would I imput them then if the computer could not see the partition?
Click to expand...
Click to collapse
To create an external partition you need to format your sdcard and to partition it in 2 partitions:
1. FAT32 (Primary partition)
2. ext4 (512 mb is enough)
Use MiniTool Partition to do it
---------- Post added at 07:07 PM ---------- Previous post was at 06:54 PM ----------
bwizz60 said:
Does that mean that there should be no fat32 for media files? How would I imput them then if the computer could not see the partition?
Click to expand...
Click to collapse
Have a look here @bwizz60 to flash correctly the script
http://forum.xda-developers.com/showthread.php?t=2350030
I have downloaded 4 ex
So I use mini part tool then install the script .This will then correct the script error?[
QUOTE=Viper The Ripper;57112798]To create an external partition you need to format your sdcard and to partition it in 2 partitions:
1. FAT32 (Primary partition)
2. ext4 (512 mb is enough)
Use MiniTool Partition to do it
---------- Post added at 07:07 PM ---------- Previous post was at 06:54 PM ----------
Have a look here @bwizz60 to flash correctly the script
http://forum.xda-developers.com/showthread.php?t=2350030[/QUOTE]
bwizz60 said:
So I use mini part tool then install the script .This will then correct the script error?[
QUOTE=Viper The Ripper;57112798]To create an external partition you need to format your sdcard and to partition it in 2 partitions:
1. FAT32 (Primary partition)
2. ext4 (512 mb is enough)
Use MiniTool Partition to do it
---------- Post added at 07:07 PM ---------- Previous post was at 06:54 PM ----------
Have a look here @bwizz60 to flash correctly the script
http://forum.xda-developers.com/showthread.php?t=2350030
Click to expand...
Click to collapse
Yeah! that's correct
1. Partition's Management (minitools, gparted, CWM... [CWM DO NOT ALLOW YOU TO CREATE .ext4 partitions!]
2. Script
3. Enjoy
No script zip
Hi again ,I got sidetracked but back on the phone case now. I have downloaded the suggested script 2+
and placed it into root . however when I try to access it .it is not seen by clockwork 5
the other two files I downloaded are there .multi root etc but not the script zip/binary.
thanks for links and your efforts to help. great forum!
bwizz60 said:
Hi again ,I got sidetracked but back on the phone case now. I have downloaded the suggested script 2+
and placed it into root . however when I try to access it .it is not seen by clockwork 5
the other two files I downloaded are there .multi root etc but not the script zip/binary.
thanks for links and your efforts to help. great forum!
Click to expand...
Click to collapse
Download the flashable zip and flash it via CWM following the steps I've posted, it should work mate
http://forum.xda-developers.com/showpost.php?p=43312058&postcount=6
still same
I have followed instructions carefully but . I still have the same issue that the download link is seen as an install icon
not as a normal winzup file like the other available downloads. I can see the downloaded file via "my files" but not via cwm 5.0.2.6 Anon
I found that the middle link on the xda site gives me a winzip file 2+
I have followed instructions to install script zip .But looking at the sd partitions via mini tool
i see that the second partition is identified as "other". and trying to use it in the phone gives me the same script error as previosly. I don't see an option in cwm to format as ex4 ?
bwizz60 said:
I have followed instructions carefully but . I still have the same issue that the download link is seen as an install icon
not as a normal winzup file like the other available downloads. I can see the downloaded file via "my files" but not via cwm 5.0.2.6 Anon
I found that the middle link on the xda site gives me a winzip file 2+
I have followed instructions to install script zip .But looking at the sd partitions via mini tool
i see that the second partition is identified as "other". and trying to use it in the phone gives me the same script error as previosly. I don't see an option in cwm to format as ex4 ?
Click to expand...
Click to collapse
CronMod OFFICIAL Thread
CWM can't create .ext4 partitions you'll need to create it using minitools partition, gparted or similar
How to then
I am just following the steps in your instructions ,ie op 8 /format sdext
intended for thunderbolt rom?
No further forward
I'm gettin nowhere quickly with this memory mod. I also have new issues . I keep needing to reboot to get wifi to connect.
This did not happen before. maybe time to try another rom
bwizz60 said:
I'm gettin nowhere quickly with this memory mod. I also have new issues . I keep needing to reboot to get wifi to connect.
This did not happen before. maybe time to try another rom
Click to expand...
Click to collapse
:weird: maybe a rom problem?
If you have created corre tly a .ext4 you can test if it's working using Link2sd app
I'm finding the script error via link 2sd . I've just checked the ex4 partition using a parted ,There is an error sign but no explanation. Deleting and redoing
the ex4 partition gives me the same error. In the interim i've ordered a smaller sd card. This still leaves me with the need to reboot for wifi to connect. Shame as i otherwise like the rom!