Database Develop

[Q] Problem with upgrading baseband

Hi All,
I tried to discuss my problem in a different topic, but i think in this topic i'll get solution to my problem.
Here is the case:
"Hi All,
I have some problem with the smartflash thing.
I installed the driver on my win7. I started the smartflash app, picked the battery, power, and volume down at the same time, put the cable on, and the smartflash cannot recognize the COM port...
The thing is, i did this procedure 2 mounth ago, and it worked. Yesterday i want to update my phone, but it didnt worked, except the factory reset
I did the LG PC Sync too, and it says, my phone is up to date... (my baseband is 0405)
Thank You in advance, and sry for my bad english
Originally Posted by shpapy
Hey you need to in install all you're drivers and reinstall them. You should first install the latest unified drivers from lg
Make sure you get to this step and everything is working also vervify under the device manger that there are no errors specially under "USB devices"
Afterwards do the procedure with the phone
Take bat out plug in cable put bat in press the button Don't open smartflash and it should still be closed..
Check if the phone is in se mode and check the device manager again u should have a device named lg usb serial port on a high com port it should be under usb devices. If you get and error on the driver or conflict goto the 1st post on this thered and download smartflash driver and update only the new lg usb device with him while the phone is still connected cz otherwise the device will desapear
That's about it if all is o.k open smartflash select on the right the driver and on the left the com port and you're done.
Good luck
Sent from my LG-P990 using XDA App
Hi,
Sry for disturb U again with my problem.
I did all of the things what you wrote, but if i plug the cable to my phone with power and vol-, The LG logo show for a few seconds, the touch leds blink for a half second, and after that the phone is shuting down, and nothing happens.
I have to reinstall my windows 7???
Thanks in advance!
Geza"
Thanks in advance!
Geza

[Q] Help rooting the N-7000

Aight what I have so far is:
1) When going to Download mode please press UP on VOL afterwards so it actually loads the mode itself
2) Then ODIN recognizes it
3) Mine is a KL3, the zImage method always brings me a Permission Denied
4) ODIN now recognizes my phone for downgrade BUT i get a Write Operation Failed.
Moving from Windows 7 to XP 32bit, the Note is installing itself as a modem!

Download and install kies from Samsung.com. If the problem still exists, try another data cable may help.
Sent from my GT-N7000 using XDA

http://downloadandroidrom.com/file/...ung_USB_Driver_for_Moblie_Phones_v1_4_6_0.exe
Download and install.
On a side note: Estoy loco pa que Cotto le rompa la cara a ese sangano Mayweather!

kelvin fong said:
Download and install kies from Samsung.com. If the problem still exists, try another data cable may help.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
I had kies installed, ill try out your suggestions
Lance Uppercut said:
http://downloadandroidrom.com/file/...ung_USB_Driver_for_Moblie_Phones_v1_4_6_0.exe
Download and install.
On a side note: Estoy loco pa que Cotto le rompa la cara a ese sangano Mayweather!
Click to expand...
Click to collapse
Ill do this after work. Thanks for that driver, it shows up when in normal usb connection but not during download mode. About the fight, lets see if cotto can do something there... we dobt want another pacquiao-esque performance!

Mornin',
So yeah, I'm awake and doing this. Good morning / whatever to all of you around the world

1char...

2chars...

Flashtool: device not recognized

Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?

what exactly did you do? write all the steps

Ok I think it works now, I needed to switch to MSC mode Thanks anyway

well, the phone needs to be turned off

+ drivers installed,lpl
Sent from my E15i using xda premium

+ holding back button while connecting USB
Is it important how did i send this?

Tommolo said:
Hi, I'm tryin to instal nAa GB kernel, but flashtool doesn't recognize my phone... If I plug the USB it says "device connected with USB debugging off", but it doesn't say the model and in fact when I try to flash it doesn't work. I've installed gordon gates and all the drivers, but it still doesn't work. Any ideas?
Click to expand...
Click to collapse
intall latest drivers and hold back button then connect to the computer....................
if still don't recognize, go to device manager and check there,

I think you don't:laugh: turn on debugging

yeah!
you forget to turn on your debugging!
mark :
allow non market apps
android debugging
install all drivers
x8driver
flashtool\driver
gordons gates

Help.
here is my problem i got the flashtool because i want to downgrade my xperia pro and it connects it detects my device but once i put it into the fastboot to flash it back to its original state it just shows the little pop up that says to connect it to fastboot mode and i do it on the phone the little blue light turns on and stuff but it doesn't recognize it on the flashtool the usb debugging is on and the unknown sources is on as well i want to downgrade the phone because since i upgraded it doesn't let me watch movies on my phone from the internet and i want to root it to if anyone can help it will be much appreciated. thanks :crying:

run ggsetup.exe in flashtool/drivers
then do flashing:laugh:

Awesome!
nag xperia said:
run ggsetup.exe in flashtool/drivers
then do flashing:laugh:
Click to expand...
Click to collapse
Doing this now. Makes Sense! Thank you

phnxme7 said:
Doing this now. Makes Sense! Thank you
Click to expand...
Click to collapse
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why

ariadelvana said:
hi can you please help me flashtool the latest version now can not flash the firmware 2.1.ftf why
Click to expand...
Click to collapse
make sure if your flash tool not corrupt, disable firewall or antivirus..
install all driver and check your phone

Milandas01 said:
Hello friend, please pay your attention. I'm try to root my canvas hd using sp flash tool. Everything is alright but when I connect my device it's only shows searching. Not detect i also install or uninstall x86 driver hundred times. But problem is same. what is the problem i can't understand :'(
Please please please help
Thank in advance :'(
Click to expand...
Click to collapse
Wrong forum
pooped from my rooted a$$

help understanding unbrick method

im reading through some unbrick methods for the lg optimus black/elite and im stuck on the download is in progress screen and i need to get backinto the phone to install a recovery properly im just not sure how to get it unbrick, im trying different methods but theyre hard to understand...can someone help

To unbrick, you don't install any recovery.
Use smartflash with stock ROM and then, you install recovery if you want.
http://forum.xda-developers.com/showthread.php?t=1448803

dcop7 said:
To unbrick, you don't install any recovery.
Use smartflash with stock ROM and then, you install recovery if you want.
http://forum.xda-developers.com/showthread.php?t=1448803
Click to expand...
Click to collapse
thanks, but when i try to select a COM port, nothing shows up, i see it in my device manager but not on the smart flash program
actually i got the COM to show up in the lgflash tool but not the smart flash program, it still shows an error when i try to use the lgflash tool...

Make sure you have the phone in software update mode. Turn phone off and plug USB in while holding volume up or down, forget which one
Sent from my LG-P970 using xda app-developers app

Rocklee99 said:
thanks, but when i try to select a COM port, nothing shows up, i see it in my device manager but not on the smart flash program
actually i got the COM to show up in the lgflash tool but not the smart flash program, it still shows an error when i try to use the lgflash tool...
Click to expand...
Click to collapse
are you on Windows 8 ?
have you installed usb drivers ?
change port usb, choose usb 2.0 not usb 3.0

P9 Bricked. (Stuck on Huawei eRecovery Mode)

Hi, I tried updated my phone to EMUI 5.0 Nougat from 4.1 on my P9. The update went wrong, I think due to a bad UPDATE.APP file and now I'm stuck in recovery mode where the only 3 options on screen are 'Reboot' 'Shutdown' and 'Download latest version and recovery' (which just tells me getting package info failed)
When I try to use the volume buttons to bring up wipe cache and factory reset it just tells me reset failed.
The only thing I seem to be able to do is hold all 3 buttons down to install update file but all the ones I try get to either 5 or 40% before failing or saying incompatible with current version.
I've been trying for 5 hours to fix it so thanks in advance for any help.

i am in the same situation...

Same here, need help.

wow! you guys should really do some reading before trying to mess with your phones. luckily, its not hard to fix. before anything, always make a nand backup through twrp. this way you can recover from whatever problems you encounter. im going to try and help with restoring back to stock.
1: your gonna need to get the srk tool found here in the p9 forum.
2: run the tool and connect the usb cable to your work station (not phone).
3: power down your p9.
4: while the power is off, hold down the volume down button and plug in the usb cable.
this should put your phone into bootloader mode. by using the srktool you can install TWRP. there are several NAND images available here that can take you back to stock or you can do a fresh install on your own. i hope this helps! oh, dont forget...... ALWAYS DO A NAND BACKUP!!!!

I got it working again.
I downloaded dc unlocker, put my phone in reboot mode with usb and used unlocker to install firmware file from the german huawei site. After tha the phone came back to recovery mode. Then I used the SD card update method with the same file. It failed at 99% hit the reboot button and phone was back to normal.

Fixed flashing the c432b136 firmware and updated After to emui 5.
PS: Sorry forse my english, i'm italian

Horuxtv said:
Fixed flashing the c432b136 firmware and updated After to emui 5.
PS: Sorry forse my english, i'm italian
Click to expand...
Click to collapse
Ciao Horu, io non ci capisco nulla, a prescindere dalla lingua. Mi puoi aiutare?

Che è successo

Ho cercato di flashare una rom e adesso se accendo mi si pianta sul brand, riesco ad entrare in fastboot ma non fa niente e con la combinazione dei tre tasti non succede nulla...

Devi mettere il firmware originale versione l09c432b136 se non ricordo male ) nella cartella chiamata dload sulla scheda SD. Appena riesci a spegnere il telefono premi i tre tasti e dovrebbe installarti il firmware originale. Io ho fatto così e ora funziona perfettamente.

ma a me non entra in erecovery

hi i have the same issue. i've looked around and cant find the firmware file that i need to put on there using twrp . could someone please help, its the ev L09

greenfire1993 said:
Hi, I tried updated my phone to EMUI 5.0 Nougat from 4.1 on my P9. The update went wrong, I think due to a bad UPDATE.APP file and now I'm stuck in recovery mode where the only 3 options on screen are 'Reboot' 'Shutdown' and 'Download latest version and recovery' (which just tells me getting package info failed)
When I try to use the volume buttons to bring up wipe cache and factory reset it just tells me reset failed.
The only thing I seem to be able to do is hold all 3 buttons down to install update file but all the ones I try get to either 5 or 40% before failing or saying incompatible with current version.
I've been trying for 5 hours to fix it so thanks in advance for any help.
Click to expand...
Click to collapse
Your Display touch is working?

droidbot1337 said:
wow! you guys should really do some reading before trying to mess with your phones. luckily, its not hard to fix. before anything, always make a nand backup through twrp. this way you can recover from whatever problems you encounter. im going to try and help with restoring back to stock.
1: your gonna need to get the srk tool found here in the p9 forum.
2: run the tool and connect the usb cable to your work station (not phone).
3: power down your p9.
4: while the power is off, hold down the volume down button and plug in the usb cable.
this should put your phone into bootloader mode. by using the srktool you can install TWRP. there are several NAND images available here that can take you back to stock or you can do a fresh install on your own. i hope this helps! oh, dont forget...... ALWAYS DO A NAND BACKUP!!!!
Click to expand...
Click to collapse
sorry im new here, so i am like only understand 40% of what u r talking now. what do you mean connect the usb cable to the work station? i only have my phone and usb cable. thats all

hijazi.ahmad said:
sorry im new here, so i am like only understand 40% of what u r talking now. what do you mean connect the usb cable to the work station? i only have my phone and usb cable. thats all
Click to expand...
Click to collapse
you need to link to either a pc or laptop.

Hello sir my Phone the same issue Display not working!!!
Rakhib_Mistry said:
Your Display touch is working?
Click to expand...
Click to collapse
Hello sir my Phone the same issue Display not working!!!

My Phone is in problem same

will try these on my P9 Plus
droidbot1337 said:
wow! you guys should really do some reading before trying to mess with your phones. luckily, its not hard to fix. before anything, always make a nand backup through twrp. this way you can recover from whatever problems you encounter. im going to try and help with restoring back to stock.
1: your gonna need to get the srk tool found here in the p9 forum.
2: run the tool and connect the usb cable to your work station (not phone).
3: power down your p9.
4: while the power is off, hold down the volume down button and plug in the usb cable.
this should put your phone into bootloader mode. by using the srktool you can install TWRP. there are several NAND images available here that can take you back to stock or you can do a fresh install on your own. i hope this helps! oh, dont forget...... ALWAYS DO A NAND BACKUP!!!!
Click to expand...
Click to collapse
will try these on my P9 Plus. thnks in advance.

greenfire1993 said:
I got it working again.
I downloaded dc unlocker, put my phone in reboot mode with usb and used unlocker to install firmware file from the german huawei site. After tha the phone came back to recovery mode. Then I used the SD card update method with the same file. It failed at 99% hit the reboot button and phone was back to normal.
Click to expand...
Click to collapse
Would you be kind enough to explain how you used dc unlocker please

Can someone please send a link for srk tool please and advise how to use the srk tool and the dc unlocker. Pretty please. I dont understand all the terms. Thanks in advance. No one in here that can assist via watsapp maybe, your help would be highly appreciated.