Hello,
I have rooted my phone with custom ROM, I am selling my phone back to the provder and need to unroot and back to standard ROM.
How do i do this?? Also how do i do the counter back to 0 so they know it hasn't been rooted??
Thank you
coolfreebies
coolfreebies said:
Hello,
I have rooted my phone with custom ROM, I am selling my phone back to the provder and need to unroot and back to standard ROM.
How do i do this?? Also how do i do the counter back to 0 so they know it hasn't been rooted??
Thank you
coolfreebies
Click to expand...
Click to collapse
First thing, are you S-Off?
If not you will only be able to get RELOCKED, not LOCKED. So that's a dead giveaway.
nkk71 said:
First thing, are you S-Off?
If not you will only be able to get RELOCKED, not LOCKED. So that's a dead giveaway.
Click to expand...
Click to collapse
Its says S-ON What does that mean??
Thank you
coolfreebies
coolfreebies said:
Its says S-ON What does that mean??
Thank you
coolfreebies
Click to expand...
Click to collapse
It means you're phone is Security On. Since you've unlocked the bootloader it probably says "UNLOCKED" and "TAMPERED", even if you go back to stock rom and stock recovery and lock your phone, it will show as "RELOCKED" (not sure if TAMPERED will go away, as there are conflicting reports about that).
The only way to really get your phone not to show any evidence of being unlocked, you would need to use revone to get it to show "LOCKED". In order to use revone, you would need to be on hboot 1.44 as hboot 1.54+ have been patched so that revone no longer works.
nkk71 said:
It means you're phone is Security On. Since you've unlocked the bootloader it probably says "UNLOCKED" and "TAMPERED", even if you go back to stock rom and stock recovery and lock your phone, it will show as "RELOCKED" (not sure if TAMPERED will go away, as there are conflicting reports about that).
The only way to really get your phone not to show any evidence of being unlocked, you would need to use revone to get it to show "LOCKED". In order to use revone, you would need to be on hboot 1.44 as hboot 1.54+ have been patched so that revone no longer works.
Click to expand...
Click to collapse
I am on HB 1.44.0000
Thank you for your advice
coolfreebies
coolfreebies said:
I am on HB 1.44.0000
Thank you for your advice
coolfreebies
Click to expand...
Click to collapse
Do some reading of the guides including revone's s-off, vomer's guide to s-off, etc.
Once you are comfortable with the procedure go ahead and S-Off. Then you'll be able to fully restore your device.
A note of advise (at your discretion of course) keep S-Off even after you fully go back to stock, as some phones do actually ship with S-Off.
Hit thanks of i helped
Have read very carefully but can't get past this part:
./revone -s 0 -u
Any suggestions
Thank you
coolfreebies
coolfreebies said:
Have read very carefully but can't get past this part:
./revone -s 0 -u
Any suggestions
Thank you
coolfreebies
Click to expand...
Click to collapse
Have you read this: http://forum.xda-developers.com/showthread.php?t=2431515
What's the error message you are receiving? Give us detailed output from the beginning of your adb shell.
EDIT: what custom ROM are you using, if it's 4.3 based it's a no go. download one that is either 4.1.2 (better) or 4.2.2 (should work also)
nkk71 said:
Have you read this: http://forum.xda-developers.com/showthread.php?t=2431515
What's the error message you are receiving? Give us detailed output from the beginning of your adb shell.
EDIT: what custom ROM are you using, if it's 4.3 based it's a no go. download one that is either 4.1.2 (better) or 4.2.2 (should work also)
Click to expand...
Click to collapse
Phone is 4.1.2
Sense 5.0
Mac/Linux: adb push /Users/vomer/Desktop/revone /data/local/tmp/
adb shell
cd /data/local/tmp
chmod 755 revone
./revone -P (Revone successful) Asks for a reboot
adb shell
cd /data/local/tmp
./revone -P (Waiting for a reboot of phone)
adb shell
cd /data/local/tmp
./revone -s 0 -u - revone failed (error code = -1) This is where i get stuck
Thank you
coolfreebies
coolfreebies said:
Phone is 4.1.2
Sense 5.0
Mac/Linux: adb push /Users/vomer/Desktop/revone /data/local/tmp/
adb shell
cd /data/local/tmp
chmod 755 revone
./revone -P (Revone successful) Asks for a reboot
adb shell
cd /data/local/tmp
./revone -P (Waiting for a reboot of phone)
adb shell
cd /data/local/tmp
./revone -s 0 -u - revone failed (error code = -1) This is where i get stuck
Thank you
coolfreebies
Click to expand...
Click to collapse
Not on my pc right now, I'll try to come back later. But -1 doesn't sound like too big of a problem, keep trying, it took some people up to 50 retries before it actually worked.
Head over to the s-off thread where u can see some other experiences.
Sent from my HTC One using xda app-developers app
coolfreebies said:
Phone is 4.1.2
Sense 5.0
Mac/Linux: adb push /Users/vomer/Desktop/revone /data/local/tmp/
adb shell
cd /data/local/tmp
chmod 755 revone
./revone -P (Revone successful) Asks for a reboot
adb shell
cd /data/local/tmp
./revone -P (Waiting for a reboot of phone)
adb shell
cd /data/local/tmp
./revone -s 0 -u - revone failed (error code = -1) This is where i get stuck
Thank you
coolfreebies
Click to expand...
Click to collapse
Just gotta keep doing it, it will eventually work (took me about 20 minutes to do it with my phone). You just have to keep running the S-OFF command again, not the whole process
coolfreebies said:
Phone is 4.1.2
Sense 5.0
Mac/Linux: adb push /Users/vomer/Desktop/revone /data/local/tmp/
adb shell
cd /data/local/tmp
chmod 755 revone
./revone -P (Revone successful) Asks for a reboot
adb shell
cd /data/local/tmp
./revone -P (Waiting for a reboot of phone)
adb shell
cd /data/local/tmp
./revone -s 0 -u - revone failed (error code = -1) This is where i get stuck
Thank you
coolfreebies
Click to expand...
Click to collapse
+1 what EddyOS said
Once you "./revone -P", and it gives you success, reboot the phone and start running " ./revone -s 0 -u" until it succeeds.
nkk71 said:
+1 what EddyOS said
Once you "./revone -P", and it gives you success, reboot the phone and start running " ./revone -s 0 -u" until it succeeds.
Click to expand...
Click to collapse
Thank you... I have been trying to do this for an hour now and no luck... I have gone from Erro 1 to Erro 2 now.
Any suggestion??
Thank you for your help...
coolfreebies
coolfreebies said:
Thank you... I have been trying to do this for an hour now and no luck... I have gone from Erro 1 to Erro 2 now.
Any suggestion??
Thank you for your help...
coolfreebies
Click to expand...
Click to collapse
From what I've read, but remember each user experience is different, try some of the following: (I know it's tedious, but if/when you get S-Off it's well worth it):
1- Try a different Sense 5 ROM 4.1.2 and/or try 4.2.2; I've even seen someone use a GPe 4.2.2 ROM and it worked
2- are you rooted? could improve chances, using "su" in the shell
3- try running the commands using terminal emulator directly on the phone; for some that worked, whereas adb didnt
So far error -1 and error -2 aren't a failure; from @The War Horse:
Code:
Error Code -1 = Potentially you need to try a different ROM or it could just be random and after a few tries and reboots it might work. A few people have reported that rebooting and using -p rather than -P has worked but I'm not convinced as -p isn't built as a command but you're free to try whatever you wish.
Error Code -2 = I've seen people report this but revone has actually worked so should you see this try and reboot and carry on, if not then try changing ROMs and try again.
Reboot, factory reset, start from the beginning again, etc etc you should get it working PLEASE :fingers-crossed:
I know it's a hassle, for some it works from the first time, for others it takes 50 times and many reboots.
PERSONALLY, I achieved S-Off while being unlocked, rooted, and on ARHD 8.x or 9.x (can't remember )
Keep going, you'll get there :fingers-crossed:
nkk71 said:
From what I've read, but remember each user experience is different, try some of the following: (I know it's tedious, but if/when you get S-Off it's well worth it):
1- Try a different Sense 5 ROM 4.1.2 and/or try 4.2.2; I've even seen someone use a GPe 4.2.2 ROM and it worked
2- are you rooted? could improve chances, using "su" in the shell
3- try running the commands using terminal emulator directly on the phone; for some that worked, whereas adb didnt
So far error -1 and error -2 aren't a failure; from @The War Horse:
Code:
Error Code -1 = Potentially you need to try a different ROM or it could just be random and after a few tries and reboots it might work. A few people have reported that rebooting and using -p rather than -P has worked but I'm not convinced as -p isn't built as a command but you're free to try whatever you wish.
Error Code -2 = I've seen people report this but revone has actually worked so should you see this try and reboot and carry on, if not then try changing ROMs and try again.
Reboot, factory reset, start from the beginning again, etc etc you should get it working PLEASE :fingers-crossed:
I know it's a hassle, for some it works from the first time, for others it takes 50 times and many reboots.
PERSONALLY, I achieved S-Off while being unlocked, rooted, and on ARHD 8.x or 9.x (can't remember )
Keep going, you'll get there :fingers-crossed:
Click to expand...
Click to collapse
Thank you for all that info... Will read though it now... But now my phone is stuck on the boot up screen, shall i try a factory reset bootlocker?
Thank you
coolfreebies
coolfreebies said:
Thank you for all that info... Will read though it now... But now my phone is stuck on the boot up screen, shall i try a factory reset bootlocker?
Thank you
coolfreebies
Click to expand...
Click to collapse
Stuck on bootloader? did u try "fastboot erase cache"
my laptop battery going dead... sorry ... c u tomorrow, hopefully with s-off
Hey,
Thank you so much for all your help it is much appreciated...
I tried using "su" in the shell but it kept aking me for a password and i am not sure what it could be...
Thank you
coolfreebies
coolfreebies said:
Hey,
Thank you so much for all your help it is much appreciated...
I tried using "su" in the shell but it kept aking me for a password and i am not sure what it could be...
Thank you
coolfreebies
Click to expand...
Click to collapse
Hi coolfreebies, did you get it working? Just curious
nkk71 said:
Hi coolfreebies, did you get it working? Just curious
Click to expand...
Click to collapse
Morning nkk71,
Nope didn't get it to work. I was trying for about 3 hours and i just gave up as it was getting to frustrating.
Gonna give it another go now.
Cheers
coolfreebies
Hey,
I managed to get ./revone -s 0 -u DONE... Yippy
Now i am stuck on ./revone -t fingers crossed it will work soon...
Thank you
coolfreebies
Related
I am new to writing anything here. But, these forums have helped me countless times and I thank you all for that.
I have a T-mobile HTC One and I have tried for 2 days now to get to S-Off but I keep getting error codes using both revone and moonshine.
With Moonshine I get all the way down to Moonshining <10> and then it says error: Dont Drink and Shine. I have run it about 10 times and keep getting the same think.
With Revone I get this error code:
2|[email protected]:/data/local/tmp #
C:\sdk-tools>adb shell
[email protected]:/ # su
su
[email protected]:/ # cd /data/local/tmp
cd /data/local/tmp
[email protected]:/data/local/tmp # chmod 755 revone.dna-0.2.1
chmod 755 revone.dna-0.2.1
[email protected]:/data/local/tmp # ./revone.dna-0.2.1 -P
./revone.dna-0.2.1 -P
revone v0.2.1
revone failed (error code = 2)
2|[email protected]:/data/local/tmp #
I have tried doing a FULL power off/factory reset/reboot bootloader. Nothing...
Also after all of this my Wifi will not connect anymore. It now stays on connecting and then after a while it says ERROR.
Any help on fixing any of these would be greatly appriciated. If you need any more information please let me know.
Dud you get any help this this ?
Sent from my HTC One using xda premium
What version is your hboot? If its greater than 1.44 you can't s off.
AT&T HTC One
GPe 4.3
CoryTallman said:
What version is your hboot? If its greater than 1.44 you can't s off.
AT&T HTC One
GPe 4.3
Click to expand...
Click to collapse
My hboot is 1.44. No help yet unfortunately.
joemc1470 said:
My hboot is 1.44. No help yet unfortunately.
Click to expand...
Click to collapse
pm me your google plus
If you are on T-Mobile, you may have accidentally applied an OTA which leaves your HBOOT at 1.44 but patches the exploit revone and moonshine use to set S-OFF.
Again, ONLY on T-Mobile, it is possible to be on HBOOT 1.44 with a patched version that will NOT allow revone or moonshine to work. Hopefully they update these tools to get around this patch. They probably will, it's likely a short matter of time.
(If you suspect you're in this situation, don't even try to apply moonshine unless you know how to restore a stock boot image. Moonshine will quit after 10 tries with an error without restoring your boot!! Moonshine *does* back up your original boot in the folder it was run from, though).
puargs said:
If you are on T-Mobile, you may have accidentally applied an OTA which leaves your HBOOT at 1.44 but patches the exploit revone and moonshine use to set S-OFF.
Again, ONLY on T-Mobile, it is possible to be on HBOOT 1.44 with a patched version that will NOT allow revone or moonshine to work. Hopefully they update these tools to get around this patch. They probably will, it's likely a short matter of time.
(If you suspect you're in this situation, don't even try to apply moonshine unless you know how to restore a stock boot image. Moonshine will quit after 10 tries with an error without restoring your boot!! Moonshine *does* back up your original boot in the folder it was run from, though).
Click to expand...
Click to collapse
I did not apply the patch but I did just get the phone. I guess it came with that patch because it did start making everything screwy (Didnt recognize my sdcard and would not let wifi turn on) I flashed a stock rom and all is good for now. I will wait for an update to moonshine.
Thanks
joemc1470 said:
I am new to writing anything here. But, these forums have helped me countless times and I thank you all for that.
I have a T-mobile HTC One and I have tried for 2 days now to get to S-Off but I keep getting error codes using both revone and moonshine.
With Moonshine I get all the way down to Moonshining <10> and then it says error: Dont Drink and Shine. I have run it about 10 times and keep getting the same think.
With Revone I get this error code:
2|[email protected]:/data/local/tmp #
C:\sdk-tools>adb shell
[email protected]:/ # su
su
[email protected]:/ # cd /data/local/tmp
cd /data/local/tmp
[email protected]:/data/local/tmp # chmod 755 revone.dna-0.2.1
chmod 755 revone.dna-0.2.1
[email protected]:/data/local/tmp # ./revone.dna-0.2.1 -P
./revone.dna-0.2.1 -P
revone v0.2.1
revone failed (error code = 2)
2|[email protected]:/data/local/tmp #
I have tried doing a FULL power off/factory reset/reboot bootloader. Nothing...
Also after all of this my Wifi will not connect anymore. It now stays on connecting and then after a while it says ERROR.
Any help on fixing any of these would be greatly appriciated. If you need any more information please let me know.
Click to expand...
Click to collapse
Have you fixed it? i have the same problem
I downloaded and installed the OTA today .I have a stock rooted installation.I clicked install and the phone went to perform the install but instead restarted quickly and reset all my settings back to factory. I checked and still on 4.1..
Help!
I would suggest getting S-OFF before updating
bigdaddy619 said:
I would suggest getting S-OFF before updating
Click to expand...
Click to collapse
Thanks.that would have been super helpful to know before hand lol. Anyway, here is how to resolve this problem for anyone else experiencing it:
http://qbking77.com/development/how-to-gain-s-off-on-the-htc-one-with-revone/
Revone Download:
http://revolutionary.io/revone
Big thanks to the Revolutionary dev team. The original thread can be found here.
Written instructions:
Download the Revone file above and transfer it to your phone (or download on your phone)
Use a root file explorer and paste the file inside the /data/local/tmp folder
Open a terminal emulator and type of the following:
su (enter)
cd /data/local/tmp (enter)
chmod 755 revone (enter) (IF revone doesn’t work, type revone.bin)
./revone -P (enter)
Reboot
Open terminal again and type:
su (enter)
cd /data/local/tmp (enter)
./revone -s 0 -u (That would be a ZERO) (enter)
Reboot
That’s it! To get rid of the tampered, or relock, follow instructions below
To remove “tampered”
open terminal
cd /data/local/tmp
su
./revone.bin -t
These are other commands that you can fill in above to
-u – Unlock the device
-l – Lock the device (as if it was never unlocked)
-r – Relock the device (mark the device as relocked)
-t – Reset the device’s tamper flag.
Click to expand...
Click to collapse
I've done everything by the book, but when I type "chmode 755 revone" it says it's not found; I've also tried "chmode 755 revone.bin", still doesn't work.
What can I do?
I'm using Terminal Emulator and Rom Toolbox Lite, doesn't work in both.
There's the obvious questions:
What directory are you in when you typed that command?
Is that the same directory you copied revone to on your phone?
deeevan said:
There's the obvious questions:
What directory are you in when you typed that command?
Is that the same directory you copied revone to on your phone?
Click to expand...
Click to collapse
cd /data/local/tmp
For both.
The command is chmod, you added an e to the end. It's complaining that the command can't be found, not revone.
deeevan said:
The command is chmod, you added an e to the end. It's complaining that the command can't be found, not revone.
Click to expand...
Click to collapse
Oh boy, now I'm ashamed.
Ok, done it, but now it says "error 1", what should I do?
EDIT: I've tried "./revone -p" [with a lower case p] and it says error, but also says "revone successful".
After that I rebooted, then tried "./revone -s 0 -u" and I get error code 1. What should I do?
Must downgrade to android 4.2 or less. If your on android 4.3, Rev one will not work.
Sent from my Nexus 7 using xda app-developers app
I had some trouble getting S-OFF using HBOOT 1.57, and I finally got it. Here is what I did in hopes someone may find it useful:
Before you Begin:
If you get stuck at the white HTC Logo when booting or you get "Process com.htc.dialer isn't responding" at any point in this guide, or even before it, you are likely missing your Radio. (I don't know exactly how this happens, but it apparently does sometimes.) I had this problem once, and flashing the latest radio from here in recovery fixed it.
Steps:
Flash this ROM. (Other ROMs may work, but this one gave me no trouble at all)
Flash this Kernel. <-- Important! Firewater will fail if you don't do this!
Follow the Firewater Instructions to obtain S-OFF. It should work the very first time. (Use the "normal, rooted device method" set of instructions.)
You should now be S-OFF! After this, you can proceed to flash your favorite ROMs Kernels, and HBOOTs. If you would like to downgrade to HBOOT 1.44 (I did), you can find the files here.
Please post if this works for you or if you need help. Thanks to all the developers who made this possible!
Thank you very so much
thank you very much you helped me save my htc was like brick but since I got resurrect from your guide
Branchys said:
thank you very much you helped me save my htc was like brick but since I got resurrect from your guide
Click to expand...
Click to collapse
Awesome! Glad I could help.
Question
Pew446 said:
I had some trouble getting S-OFF using HBOOT 1.57, and I finally got it. Here is what I did in hopes someone may find it useful:
Before you Begin:
If you get stuck at the white HTC Logo when booting or you get "Process com.htc.dialer isn't responding" at any point in this guide, or even before it, you are likely missing your Radio. (I don't know exactly how this happens, but it apparently does sometimes.) I had this problem once, and flashing the latest radio from here in recovery fixed it.
Steps:
Flash this ROM. (Other ROMs may work, but this one gave me no trouble at all)
Flash this Kernel. <-- Important! Firewater will fail if you don't do this!
Follow the Firewater Instructions to obtain S-OFF. It should work the very first time. (Use the "normal, rooted device method" set of instructions.)
You should now be S-OFF! After this, you can proceed to flash your favorite ROMs Kernels, and HBOOTs. If you would like to downgrade to HBOOT 1.44 (I did), you can find the files here.
Please post if this works for you or if you need help. Thanks to all the developers who made this possible!
Click to expand...
Click to collapse
Hi, what specific ROM and Kernel version did you use to get Firewater to work? I have flashed rom Bad_Boyz_Sprint_ONE_Sense_6_v1.0 and Kernel ElementalX-sprint-m7-13.1 but USB debugging is not working and Firewater is not working properly, I am guessing its a kernel issue. I leave everything on default while installing Kernel thru TWRP. Can you confirm? I appreciate the help
DanielGalan said:
Hi, what specific ROM and Kernel version did you use to get Firewater to work? I have flashed rom Bad_Boyz_Sprint_ONE_Sense_6_v1.0 and Kernel ElementalX-sprint-m7-13.1 but USB debugging is not working and Firewater is not working properly, I am guessing its a kernel issue. I leave everything on default while installing Kernel thru TWRP. Can you confirm? I appreciate the help
Click to expand...
Click to collapse
Did you check if your fastboot drivers are working?
StormyNight said:
Did you check if your fastboot drivers are working?
Click to expand...
Click to collapse
Yes, I did fastboot devices and I got the device listed there. Although I could see that in the phone it does not appear the 4 bars of USB debugging. I had it checked in the Dev Options. When I do the same with the stock 4.4.2 I do get those 4 bars and the indication that the USB debugging is active.
DanielGalan said:
Yes, I did fastboot devices and I got the device listed there. Although I could see that in the phone it does not appear the 4 bars of USB debugging. I had it checked in the Dev Options. When I do the same with the stock 4.4.2 I do get those 4 bars and the indication that the USB debugging is active.
Click to expand...
Click to collapse
Does fastboot devices work in the bootloader?
StormyNight said:
Does fastboot devices work in the bootloader?
Click to expand...
Click to collapse
Yes it gets recognized. But when I turn on the phone and try to run the firewater commands it does nothing. No error nor the prompt of the disclaimer. I thought I better asked you and see if you have any idea of what could be wrong.
DanielGalan said:
Yes it gets recognized. But when I turn on the phone and try to run the firewater commands it does nothing. No error nor the prompt of the disclaimer. I thought I better asked you and see if you have any idea of what could be wrong.
Click to expand...
Click to collapse
firewater, I believe runs with the phone booted into android, not fastboot.
Aldo101t said:
firewater, I believe runs with the phone booted into android, not fastboot.
Click to expand...
Click to collapse
Yeah. I just booted to fastboot to check the drivers. When I push the firewater file I get success. Its just the last command that does no action.
DanielGalan said:
Yeah. I just booted to fastboot to check the drivers. When I push the firewater file I get success. Its just the last command that does no action.
Click to expand...
Click to collapse
Verify if the file access permissions changed.. it might be that chmod isn't working.
StormyNight said:
Verify if the file access permissions changed.. it might be that chmod isn't working.
Click to expand...
Click to collapse
Hi. I meant adb devices. And I was wondering how do I check the file permissions. Can I try to copy firewater with a root file manager ? Thank you
This is what I get in adb
C:\Program Files (x86)\Minimal ADB and Fastboot>adb wait-for-device push firewat
er /data/local/tmp
5927 KB/s (4522136 bytes in 0.745s)
C:\Program Files (x86)\Minimal ADB and Fastboot>adb shell
[email protected]:/ $ su
su
[email protected]:/ # chmod 755 /data/local/tmp/firewater
chmod 755 /data/local/tmp/firewater
[email protected]:/ # /data/local/tmp/firewater
/data/local/tmp/firewater
[email protected]:/ #
After this, there is no action from firewater. I should get a warning prompt, but I don't.
DanielGalan said:
Hi. I meant adb devices. And I was wondering how do I check the file permissions. Can I try to copy firewater with a root file manager ? Thank you
This is what I get in adb
C:\Program Files (x86)\Minimal ADB and Fastboot>adb wait-for-device push firewat
er /data/local/tmp
5927 KB/s (4522136 bytes in 0.745s)
C:\Program Files (x86)\Minimal ADB and Fastboot>adb shell
[email protected]:/ $ su
su
[email protected]:/ # chmod 755 /data/local/tmp/firewater
chmod 755 /data/local/tmp/firewater
[email protected]:/ # /data/local/tmp/firewater
/data/local/tmp/firewater
[email protected]:/ #
After this, there is no action from firewater. I should get a warning prompt, but I don't.
Click to expand...
Click to collapse
Are you doing adb reboot before doing adb wait-for-device? Also make sure that your device has no lock mechanism enabled (pattern lock etc).
StormyNight said:
Are you doing adb reboot before doing adb wait-for-device? Also make sure that your device has no lock mechanism enabled (pattern lock etc).
Click to expand...
Click to collapse
I do, this is what I found weird. Screenshot 1 is stock rom 4.4.2 and it says USB debugging enabled. Screenshot 2&3 is Bad_Boyz_Sprint_ONE_Sense_6_v1.0 ROM with its default kernel, it shows no USB debugging enabled even when its selected
DanielGalan said:
I do, this is what I found weird. Screenshot 1 is stock rom 4.4.2 and it says USB debugging enabled. Screenshot 2&3 is Bad_Boyz_Sprint_ONE_Sense_6_v1.0 ROM with its default kernel, it shows no USB debugging enabled even when its selected
Click to expand...
Click to collapse
No idea :S You might want to uncheck Verify apps over USB in Screenshot 3 btw.
StormyNight said:
No idea :S You might want to uncheck Verify apps over USB in Screenshot 3 btw.
Click to expand...
Click to collapse
I tried but no luck. Is there any other ROM I could try firewater with? I was thinking maybe the Venom.
DanielGalan said:
I tried but no luck. Is there any other ROM I could try firewater with? I was thinking maybe the Venom.
Click to expand...
Click to collapse
Try following the instructions on this post.
StormyNight said:
Try following the instructions on this post.
Click to expand...
Click to collapse
Thank you for bearing with me.
I did as indicated on that post, but still having issues with firewater. This is what I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>adb devices
List of devices attached
FA34MS906354 device
C:\Program Files (x86)\Minimal ADB and Fastboot>adb reboot
C:\Program Files (x86)\Minimal ADB and Fastboot>adb wait-for-device push firewat
er /data/local/tmp
4533 KB/s (4522136 bytes in 0.974s)
C:\Program Files (x86)\Minimal ADB and Fastboot>adb shell
←7←[r←[999;999H←[[email protected]:/ $ su
su
←7←[r←[999;999H←[[email protected]:/ # chmod 755 /data/local/tmp/firewater
chmod 755 /data/local/tmp/firewater
[email protected]:/ # /data/local/tmp/firewater
/data/local/tmp/firewater
[email protected]:/ #
There is no action after this
DanielGalan said:
Thank you for bearing with me.
I did as indicated on that post, but still having issues with firewater. This is what I get:
C:\Program Files (x86)\Minimal ADB and Fastboot>adb devices
List of devices attached
FA34MS906354 device
C:\Program Files (x86)\Minimal ADB and Fastboot>adb reboot
C:\Program Files (x86)\Minimal ADB and Fastboot>adb wait-for-device push firewat
er /data/local/tmp
4533 KB/s (4522136 bytes in 0.974s)
C:\Program Files (x86)\Minimal ADB and Fastboot>adb shell
←7←[r←[999;999H←[[email protected]:/ $ su
su
←7←[r←[999;999H←[[email protected]:/ # chmod 755 /data/local/tmp/firewater
chmod 755 /data/local/tmp/firewater
[email protected]:/ # /data/local/tmp/firewater
/data/local/tmp/firewater
[email protected]:/ #
There is no action after this
Click to expand...
Click to collapse
Try flashing an older release of CyanogenMod - I'd try Snapshot M8.
StormyNight said:
Try flashing an older release of CyanogenMod - I'd try Snapshot M8.
Click to expand...
Click to collapse
Hi, I tried but I had the same results, the commands are accepted but there is no action after the last one . I'm gonna do a last attempt on my other computer and see if it works.
Q&A for [S-OFF] revone - DEVELOPER EARLY ACCESS PREVIEW EDITION
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
error
i got this error when i use revone to set my phone on s-off :
C:\Program Files (x86)\Minimal ADB and Fastboot>adb shell
[email protected]/# su
su
[email protected]/# cd /data/local/tmp
cd /data/local/tmp
cd /data/local/tmp
[email protected]/data/local/tmp# chmod 755 revone
chmod 755 revone
chmod 755 revone
[email protected]/data/local/tmp# ./revone -P
./revone -P
./revone -P
revone v0.2.1
revone failed (error code = 1)
1|[email protected]/data/local/tmp#
Can anyone help me pleaseeee???????:angel::angel::angel::angel:
theforgottenjaber said:
i got this error when i use revone to set my phone on s-off :
C:\Program Files (x86)\Minimal ADB and Fastboot>adb shell
[email protected]/# su
su
[email protected]/# cd /data/local/tmp
cd /data/local/tmp
cd /data/local/tmp
[email protected]/data/local/tmp# chmod 755 revone
chmod 755 revone
chmod 755 revone
[email protected]/data/local/tmp# ./revone -P
./revone -P
./revone -P
revone v0.2.1
revone failed (error code = 1)
1|[email protected]/data/local/tmp#
Can anyone help me pleaseeee???????:angel::angel::angel::angel:
Click to expand...
Click to collapse
is you phone hboot 1.44 dated before june of 2013 ?
if not your using the wrong tool... theirs also Moonshine / Firewater and Sunshine for s-off
THank youuuu
clsA said:
is you phone hboot 1.44 dated before june of 2013 ?
if not your using the wrong tool... theirs also Moonshine / Firewater and Sunshine for s-off
Click to expand...
Click to collapse
Thankss my hboot is 1.57 and i tried now firewater and it Works i thinking
Is revolutionary 0.4pre4 still active?
I'm trying to flash an HTC Desire fron Android 2.2.2. Revolutionary managed to S-OFF last night but failed to download ClockworkMod Recovery. Same problem again this morning.
Usb debugging is set on, Accept non-market apps set on, working on Linux Mint 16 netbook.
Do you want to download (Internet connection required) and flash ClockworkMod Recovery? [Y/n] Y
Downloading recovery for your phone (bravo)...FAILED.
Retrying download...FAILED.
Retrying download...FAILED.
Retrying download...FAILED.
Unable to download recovery. Please download custom recovery yourself and flash it over fastboot.
Click to expand...
Click to collapse
Work in hboot 1.57.0000?
Hi, I have a question, this method work in hboot 1.57 on m7 sprint (m7_wls) , Thanks
Frikso1 said:
Hi, I have a question, this method work in hboot 1.57 on m7 sprint (m7_wls) , Thanks
Click to expand...
Click to collapse
Read the OP (In red)
doesnt work since 1.54
revone failed with error code 1
[email protected]:/ $ cd /data/local/tmp
cd /data/local/tmp
[email protected]:/data/local/tmp $ su
su
[email protected]:/data/local/tmp # ./revone -P
./revone -P
revone v0.2.1
revone failed (error code = 1)
cid: CWS__001
version-bootloader: 1.55.0000
version-main: 3.17.502.3
Linux version 3.4.10-gcfc57d3 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREE
MPT Tue Sep 10 01:56:05 CST 2013
Please help me how to resolve the issue
revone failed with error code 1
adb shell
[email protected]:/ $ cd /data/local/tmp
cd /data/local/tmp
[email protected]:/data/local/tmp $ su
su
[email protected]:/data/local/tmp # ./revone -P
./revone -P
revone v0.2.1
revone failed (error code = 1)
cid: CWS__001
version-bootloader: 1.55.0000
version-main: 3.17.502.3
Linux version 3.4.10-gcfc57d3 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREE
MPT Tue Sep 10 01:56:05 CST 2013
any help is really appreciated....
kshans said:
adb shell
[email protected]:/ $ cd /data/local/tmp
cd /data/local/tmp
[email protected]:/data/local/tmp $ su
su
[email protected]:/data/local/tmp # ./revone -P
./revone -P
revone v0.2.1
revone failed (error code = 1)
cid: CWS__001
version-bootloader: 1.55.0000
version-main: 3.17.502.3
Linux version 3.4.10-gcfc57d3 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREE
MPT Tue Sep 10 01:56:05 CST 2013
any help is really appreciated....
Click to expand...
Click to collapse
This does not work with your HBoot 155 you need to use rumrunner or sunshine to s-off
Thanx it really helps
will work on hboot 1.61?
HELP
tugui95 said:
HELP
Click to expand...
Click to collapse
NO .. use Sunshine s-off
Revone
Ok so I'm not rooted bit want to be that's why I need this.I can't hook my phone to a computer because the charger port is broken.so I have my phone running from a wire hooked to the battery port.But I still got it running.I want to get S -off from this method.first thing first I know u need root so I use the Sunshine app to temp root my device so I do have most root privledges.
I downloaded revone.bin moved to /data/local/tmp
Open terminal
Su
CD /data/local/tmp
chmod 755 revone
./revone -p (lower case only works)
then revone successful
then reboot
the I have to temp root again cause I lose root when rebooting
then
Su
CD /data/local/revone
./revone -s 0 -u
revone failed now what's going on how can I fix this
also I have no other method works on my device cause can't use computer
and Sunshine only gets to temp root and that's as far as that goes anyways I woildnt have 25$ bucks anyway.But need to unlock my bootloader PLease HELP
also how can I change my cid too 11111111 that might have something to do with it
Sent from HTC one s 4.1.1 not rooted not unlocked besides SIM unlock
will it work on hboot 1.57?
how to make it work that is to remove tampered flag on hboot 1.57?
thanks in advance
I tried removing it but -t doesn't work or --T but says successful but nothing happened and I'm not on hboot 1.57
Sent from my HTC One S using XDA Free mobile app
vsriperu said:
how to make it work that is to remove tampered flag on hboot 1.57?
thanks in advance
Click to expand...
Click to collapse
htc1one1 said:
I tried removing it but -t doesn't work or --T but says successful but nothing happened and I'm not on hboot 1.57
Sent from my HTC One S using XDA Free mobile app
Click to expand...
Click to collapse
revone is for hboot 1.44 only, read previous page.
You can use the bootloader reset tool from htc1guru.com to remove the tampered banner.
How can I unlock my bootloader for free no computer
Sent from my HTC One S using XDA Free mobile app
htc1one1 said:
How can I unlock my bootloader for free no computer
Sent from my HTC One S using XDA Free mobile app
Click to expand...
Click to collapse
you need a computer with fastboot to unlock the bootloader or without a computer the only possibility is sunshine but cost 25$
Yeh Sunshine don't work only goes last trmproot then stops or shuts down phone
Sent from my HTC One S using XDA Free mobile app