[Q] HTC One for at&t *Tampered* - One (M7) Q&A, Help & Troubleshooting

I have an at&t HTC One that I am trying to falsh the Google Play Edition RUU to. I have the bootloader unlocked via the HTC DEV website. I have TWRP Recovery installed. I am seeing **Tampered** when it boot into fastboot, and my phone is still showing that it is S-ON.
I have tried Revone and moonshine to make the device S-OFF but neither worked. I am thinking once I obtain S-OFF the **Tampered** will go away.
Is their another way to obtain S-OFF for this device, outside of Moonshine and Revone??

will54880 said:
I have an at&t HTC One that I am trying to falsh the Google Play Edition RUU to. I have the bootloader unlocked via the HTC DEV website. I have TWRP Recovery installed. I am seeing **Tampered** when it boot into fastboot, and my phone is still showing that it is S-ON.
I have tried Revone and moonshine to make the device S-OFF but neither worked. I am thinking once I obtain S-OFF the **Tampered** will go away.
Is their another way to obtain S-OFF for this device, outside of Moonshine and Revone??
Click to expand...
Click to collapse
What's your hboot version and date? If you're on 1.44 May 2013 or prior it should work, if you're on 1.44 June (ATT or T-Mob) there's a way to downgrade, and if you're on 1.54 then, sorry, but it won't work.
Check this guide: http://forum.xda-developers.com/showthread.php?t=2431515

nkk71 said:
What's your hboot version and date? If you're on 1.44 May 2013 or prior it should work, if you're on 1.44 June (ATT or T-Mob) there's a way to downgrade, and if you're on 1.54 then, sorry, but it won't work.
Check this guide: http://forum.xda-developers.com/showthread.php?t=2431515
Click to expand...
Click to collapse
I have 1.44 dated July 5 2013
I tried flashing through TWRP one of the stock recoveries but received FAILED

will54880 said:
I have 1.44 dated July 5 2013
Click to expand...
Click to collapse
That looks like the patched 1.44, if you're ATT or T-Mobile, there are ways to downgrade. I haven't used them, but many reported success: check the guide I posted above for the links to downgrade.
will54880 said:
I tried flashing through TWRP one of the stock recoveries but received FAILED
Click to expand...
Click to collapse
You can't flash recovery through TWRP, you must use fastboot.

nkk71 said:
That looks like the patched 1.44, if you're ATT or T-Mobile, there are ways to downgrade. I haven't used them, but many reported success: check the guide I posted above for the links to downgrade.
You can't flash recovery through TWRP, you must use fastboot.
Click to expand...
Click to collapse
I found an ATT RUU to use to get back to stock
I re-locked my bootloader, so now I show ***RELOCKED***
HBOOT version is 1.44.0000 dated May 3, 2013
What should be the next steps? This is my guess:
Unlock bootloader
Root device
S-Off using either moonshine or revone

will54880 said:
What should be the next steps? This is my guess:
Unlock bootloader
Root device
S-Off using either moonshine or revone
Click to expand...
Click to collapse
Just use revone to unlock and S-Off, it has a temproot exploit.
If that doesn't work, you can try your method.

will54880 said:
I found an ATT RUU to use to get back to stock
I re-locked my bootloader, so now I show ***RELOCKED***
HBOOT version is 1.44.0000 dated May 3, 2013
What should be the next steps? This is my guess:
Unlock bootloader
Root device
S-Off using either moonshine or revone
Click to expand...
Click to collapse
You can try without unlocking and rooting, it sometimes improves chances but you might as well try without first, could just work "straight of of the box" :fingers-crossed:
check these guides:
http://forum.xda-developers.com/showthread.php?t=2365506
http://forum.xda-developers.com/showthread.php?t=2431515
and obviously the OP from http://forum.xda-developers.com/showthread.php?t=2314582
in case it doesn't work without unlocking & rooting, then yes, go ahead unlock via HTCdev again, flash a rooted Sense 5 Android 4.1.2 ROM, and try revone again until it succeeds. with hboot 1.44 May 2013 it should work
Good luck

BenPope said:
Just use revone to unlock and S-Off, it has a temproot exploit.
If that doesn't work, you can try your method.
Click to expand...
Click to collapse
I got the failed to map memory error when just using revone

Related

Can I install a Google Edition RUU in a HTC Developer Edition device?

I found the RUU in http : / / www . htcdev.com/devcenter/downloads and tought if is possible do it.
Regards
only if your s-off
Victor Potasso said:
I found the RUU in http : / / www . htcdev.com/devcenter/downloads and tought if is possible do it.
Regards
Click to expand...
Click to collapse
Like I said in your previous thread http://forum.xda-developers.com/showthread.php?t=2552669
You might want to read this: http://forum.xda-developers.com/showthread.php?t=2541082
If you read, then you will understand that the RUU you want to execute need to be compatible with both your CID, MID and hboot version.
So yes its possible, but you need to be s-off to change CID/MID and to downgrade hboot if required.
and please don't start 2 different threads for relatively the same questions.
Hope it help
alray said:
Like I said in your previous thread http://forum.xda-developers.com/showthread.php?t=2552669
You might want to read this: http://forum.xda-developers.com/showthread.php?t=2541082
If you read, then you will understand that the RUU you want to execute need to be compatible with both your CID, MID and hboot version.
So yes its possible, but you need to be s-off to change CID/MID and to downgrade hboot if required.
and please don't start 2 different threads for relatively the same questions.
Hope it help
Click to expand...
Click to collapse
Can I set my device to s-off?
Victor Potasso said:
Can I set my device to s-off?
Click to expand...
Click to collapse
yes, use revone tool for hboot 1.44 or use rumrunner tool for hboot 1.54 and 1.55
This is the first thing listed in the thread I linked above.....
First you need to be S-Off, this will NOT work with S-On!!!
A) If you’re on hboot 1.44 use revone to get S-Off: http://forum.xda-developers.com/show....php?t=2314582
B) If you’re on hboot 1.54/1.55 use rumrunner to get S-Off: http://rumrunner.us/ and http://forum.xda-developers.com/show....php?t=2487888
Click to expand...
Click to collapse
---------- Post added at 02:38 AM ---------- Previous post was at 02:31 AM ----------
if you need to change cid:
Code:
fastboot oem writecid GOOGL01
where ''GOOGL01'' is the GPE cid
If you need to change MID:
http://forum.xda-developers.com/showthread.php?t=2322820
alray said:
yes, use revone tool for hboot 1.44 or use rumrunner tool for hboot 1.54 and 1.55
This is the first thing listed in the thread I linked above.....
---------- Post added at 02:38 AM ---------- Previous post was at 02:31 AM ----------
if you need to change cid:
Code:
fastboot oem writecid GOOGL01
where ''GOOGL01'' is the GPE cid
If you need to change MID:
http://forum.xda-developers.com/showthread.php?t=2322820
Click to expand...
Click to collapse
My hboot is 1.55 and I tried rumrunner but It got unsuccess. It stops when chilling... Do u think it happens because I have to change my MID
Victor Potasso said:
My hboot is 1.55 and I tried rumrunner but It got unsuccess. It stops when chilling... Do u think it happens because I have to change my MID
Click to expand...
Click to collapse
I can't answer that cause I'm not familiar with rumrunner since I s-off'd my One when it was on 1.44 hboot with revone. In theory rumrunner 0.5.0 should work on all international variant with hboot 1.54 and up except verizon model that need a different version of rumrunner. Maybe you should ask help directly on rumrunner thread for that step or search the forum for similar issue with s-off on 1.55. Hope you will find out.
alray said:
I can't answer that cause I'm not familiar with rumrunner since I s-off'd my One when it was on 1.44 hboot with revone. In theory rumrunner 0.5.0 should work on all international variant with hboot 1.54 and up except verizon model that need a different version of rumrunner. Maybe you should ask help directly on rumrunner thread for that step or search the forum for similar issue with s-off on 1.55. Hope you will find out.
Click to expand...
Click to collapse
Thanks mate, but I can't because I just Signed Up. I Can't write something in that threads yet :crying:
Cheers mate
Victor Potasso said:
Thanks mate, but I can't because I just Signed Up. I Can't write something in that threads yet :crying:
Cheers mate
Click to expand...
Click to collapse
I went back and forth with rumrunner and moonshine while using a rom 4.3 GPE ROM with twrp and it kept failing. ultimately installed a 4.1.2 stock then used revone and it worked wonderfully. I was able to remove the tampered flag, unlock the stock bootloader and flash the GPE 4.3 and receive the updates. I also only have a mac so i was limited in not being able to run .exe's.
swag1981 said:
I went back and forth with rumrunner and moonshine while using a rom 4.3 GPE ROM with twrp and it kept failing. ultimately installed a 4.1.2 stock then used revone and it worked wonderfully. I was able to remove the tampered flag, unlock the stock bootloader and flash the GPE 4.3 and receive the updates. I also only have a mac so i was limited in not being able to run .exe's.
Click to expand...
Click to collapse
I'm using Parallels Desktop as Virtual Machine. I use to run Win8 and Ubuntu with it. It works very well.
:good: w w w . parallels.com/products/desktop/
Sorry mate, I'm a bit noob. I got the TAMPERED FLAG when I tried to get S-OFF with rumrunner. What does it means?
I tried moonshine as well but it doesn't start
I've tried to get 4.1.2 stock as well but my device has to be S-OFF :crying:
Regards
Victor Potasso said:
I'm using Parallels Desktop as Virtual Machine. I use to run Win8 and Ubuntu with it. It works very well.
:good: w w w . parallels.com/products/desktop/
Sorry mate, I'm a bit noob. I got the TAMPERED FLAG when I tried to get S-OFF with rumrunner. What does it means?
I tried moonshine as well but it doesn't start
I've tried to get 4.1.2 stock as well but my device has to be S-OFF :crying:
Regards
Click to expand...
Click to collapse
Tampered flag is just that, a flag. It doesnt hinder anything, just a pop up for "Warranty" purposes. The flag pops up when you unlock the bootloader but when you get S-Off you can remove the flag.
Since you have access to windows i would go to http://forum.xda-developers.com/showthread.php?t=2428276 and find the .exe RUU for your area. Just get into your bootloader, select fastboot usb and run the .exe. Pick the lowest firmware available so you can ensure that you get the 1.44 hboot.
swag1981 said:
Tampered flag is just that, a flag. It doesnt hinder anything, just a pop up for "Warranty" purposes. The flag pops up when you unlock the bootloader but when you get S-Off you can remove the flag.
Since you have access to windows i would go to http://forum.xda-developers.com/showthread.php?t=2428276 and find the .exe RUU for your area. Just get into your bootloader, select fastboot usb and run the .exe. Pick the lowest firmware available so you can ensure that you get the 1.44 hboot.
Click to expand...
Click to collapse
swag1981 my hboot is 1.55
Is the process with .zip and .exe different? Maybe if I run .exe it can work with S-ON? :victory:
Victor Potasso said:
swag1981 my hboot is 1.55
Is the process with .zip and .exe different? Maybe if I run .exe it can work with S-ON? :victory:
Click to expand...
Click to collapse
The zip can only be used with S-Off where as the exe is designed to be used to return a phone to stock with S-On.
Just get into fastboot and run the exe, it should do the rest for you. It will wipe the entire phone, but as far as I'm concerned, a blank phone is better than an unusable one.
I'm not sure if the hboot makes a difference, but mine downgraded when I flashed an older RUU.
Once you get the older hboot and firmware, you may have to unlock your bootloader again through HTC Dev, then S-Off. Once your S-Off unlocking your bootloader is much easier.
Sent from my HTC One using Tapatalk
Whoo ho! Nice mate. I wanna to get it.
I'll try this soon. Thanks again mate. You've been helping me a lot.
Cheers
Whoo ho! Nice mate. I wanna to get it.
I'll try this soon. Thanks again mate. You've been helping me a lot.
:cheers:
Give this site a read over too when you get a chance http://www.htc1guru.com/downloads/
Sent from my HTC One using Tapatalk
swag1981 said:
The zip can only be used with S-Off where as the exe is designed to be used to return a phone to stock with S-On.
Just get into fastboot and run the exe, it should do the rest for you. It will wipe the entire phone, but as far as I'm concerned, a blank phone is better than an unusable one.
I'm not sure if the hboot makes a difference, but mine downgraded when I flashed an older RUU.
Once you get the older hboot and firmware, you may have to unlock your bootloader again through HTC Dev, then S-Off. Once your S-Off unlocking your bootloader is much easier.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
If you want to run a GPE RUU.exe your phone MUST have CID compatible (BS_US0001) with GPE and MID: PN0712000
you can check that with this command:
Code:
fastboot oem readcid
fastboot oem readmid
if they doesn't match, you MUST be S-OFF to change them
If your device is currently a DEV edition, you should already have PN0712000 as MID so the only concern is that CID need to match GPE RUU
You should post your
Code:
fastboot getvar-all
and remove imei and sn so it will be easier to see what options you have.
swag1981 said:
The zip can only be used with S-Off where as the exe is designed to be used to return a phone to stock with S-On.
Just get into fastboot and run the exe, it should do the rest for you. It will wipe the entire phone, but as far as I'm concerned, a blank phone is better than an unusable one.
I'm not sure if the hboot makes a difference, but mine downgraded when I flashed an older RUU.
Once you get the older hboot and firmware, you may have to unlock your bootloader again through HTC Dev, then S-Off. Once your S-Off unlocking your bootloader is much easier.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I just tried run this .exe but I got this error http://imgur.com/rYvIdBd
I downloaded RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe but my current ROM is Android 4.3 version 3.22.1540.1. I suppose I got this error because I tried to install a oldest version in my device. Does it make any ****ing sense?
I'm downloading the .exe for 3.22.1540.1 and than try to install it.
Regards
alray said:
If you want to run a GPE RUU.exe your phone MUST have CID compatible (BS_US0001) with GPE and MID: PN0712000
you can check that with this command:
Code:
fastboot oem readcid
fastboot oem readmid
if they doesn't match, you MUST be S-OFF to change them
If your device is currently a DEV edition, you should already have PN0712000 as MID so the only concern is that CID need to match GPE RUU
You should post your
Code:
fastboot getvar-all
and remove imei and sn so it will be easier to see what options you have.
Click to expand...
Click to collapse
Yep, my device has MID as PN0712000 and CID BS_US001
I tried run RUU_M7_UL_JB_50_BrightstarUS_WWE_1.29.1540.16.exe from HTC1GURU byt i got this error http://imgur.com/rYvIdBd
My current software version is 3.22.1540.1.
@alray and @swag1981
I followed this thread http://forum.xda-developers.com/showthread.php?p=46046898
If I have a hboot S-ON it has to be LOCKED or RE-LOCKED. It'll never work with hboot UNLOCK. So if your hboot is S-OFF it not matter.
Thank u mates. You were friggin' awesome.
Regards

impossible to S-OFF my HTC One?

I have an AT&T HTC One that I have successfully bootloader unlocked and rooted.
I cannot get it to S-OFF
I have hboot 1.44 so I have tried both revone and Moonshine.
I have tried with the stock ROM (don't know what version): ./revone -P would give me error ID 2 and Moonshine would try 10 times with a failure of Don't drink and Shine!
I have tried with Android Revolution based on 4.4: ./revone -P would give me error ID 1 and Moonshine was unable to pass the 2nd ADB test (phone would freeze after rebooting)
I have tried with stock roms based on 4.2 and even on 4.1: ./revone -P would give me error ID -6 and Moonshine would try 10 times with a failure of Don't drink and Shine! I read that -6 was a matter of persistence, but I tried a hundred time on two different roms and had no success.
I read something somewhere that past a certain firmware, the exploit that allowed both revone and Moonshine to function was already patched. Is it impossible to S-OFF my phone now? I'm not 100% sure where to check my software version, but I am on the 4.1.2 Stock-based rom now and under About -> Software Information the Software number shows as 1.26.502.15
Anyone help?
ZippyDan said:
I have an AT&T HTC One that I have successfully bootloader unlocked and rooted.
I cannot get it to S-OFF
I have hboot 1.44 so I have tried both revone and Moonshine.
I have tried with the stock ROM (don't know what version): ./revone -P would give me error ID 2 and Moonshine would try 10 times with a failure of Don't drink and Shine!
I have tried with Android Revolution based on 4.4: ./revone -P would give me error ID 1 and Moonshine was unable to pass the 2nd ADB test (phone would freeze after rebooting)
I have tried with stock roms based on 4.2 and even on 4.1: ./revone -P would give me error ID -6 and Moonshine would try 10 times with a failure of Don't drink and Shine! I read that -6 was a matter of persistence, but I tried a hundred time on two different roms and had no success.
I read something somewhere that past a certain firmware, the exploit that allowed both revone and Moonshine to function was already patched. Is it impossible to S-OFF my phone now? I'm not 100% sure where to check my software version, but I am on the 4.1.2 Stock-based rom now and under About -> Software Information the Software number shows as 1.26.502.15
Anyone help?
Click to expand...
Click to collapse
have you tried rumrunner s-off
boroboy69r said:
have you tried rumrunner s-off
Click to expand...
Click to collapse
Of course I ran across rumrunner in my searches here http://forum.xda-developers.com/showthread.php?t=2488772
But according to this post, the hboot must be version 1.54 or 1.55. It specifically says I must use revone or Moonshine if I am running 1.44. So I haven't tried it yet but I guess it can't hurt ...
ZippyDan said:
Of course I ran across rumrunner in my searches here http://forum.xda-developers.com/showthread.php?t=2488772
But according to this post, the hboot must be version 1.54 or 1.55. It specifically says I must use revone or Moonshine if I am running 1.44. So I haven't tried it yet but I guess it can't hurt ...
Click to expand...
Click to collapse
Check date of bootloader, if it's before June 2013 then use the following ROM to get S-Off, using revone:
Android_Revolution_HD-One_9.4.zip 970.8 MB
https://mega.co.nz/#!aZkF2IIC!UIL4ww1y-bhTq4sQOEVjsi89pmI2GkwCPLMRDlNrrjM
MD5: 06c863ce41b0d5001290737a31e198a1
if the date of bootloader is June 2013 or later then it's a patched version, there's a downgrade method linked here: http://forum.xda-developers.com/showthread.php?t=2431515
nkk71 said:
Check date of bootloader, if it's before June 2013 then use the following ROM to get S-Off, using revone:
Android_Revolution_HD-One_9.4.zip 970.8 MB
https://mega.co.nz/#!aZkF2IIC!UIL4ww1y-bhTq4sQOEVjsi89pmI2GkwCPLMRDlNrrjM
MD5: 06c863ce41b0d5001290737a31e198a1
if the date of bootloader is June 2013 or later then it's a patched version, there's a downgrade method linked here: http://forum.xda-developers.com/showthread.php?t=2431515
Click to expand...
Click to collapse
Thanks so much nkk. Looks like that is exactly my problem. My hboot shows July 5, 2013, so off to follow that guide and I'll let you know what happens.
ZippyDan said:
Thanks so much nkk. Looks like that is exactly my problem. My hboot shows July 5, 2013, so off to follow that guide and I'll let you know what happens.
Click to expand...
Click to collapse
you can also RUU to android 4.3 hboot 1.55 sense your AT&T and then rumrunner will work
http://www.htc1guru.com/dld/ruu_m7_...3_10-38j-1157-04_release_334235_signed_2-exe/
clsA said:
you can also RUU to android 4.3 hboot 1.55 sense your AT&T and then rumrunner will work
http://www.htc1guru.com/dld/ruu_m7_...3_10-38j-1157-04_release_334235_signed_2-exe/
Click to expand...
Click to collapse
I tried this but I kept getting error 155 when running the RUU program. I think that is because I had to relock my bootloader first and I didn't know that. Anyway, I got it working with hboot 1.44 now so I think that is better.
nkk71 said:
Check date of bootloader,
if the date of bootloader is June 2013 or later then it's a patched version, there's a downgrade method linked here: http://forum.xda-developers.com/showthread.php?t=2431515
Click to expand...
Click to collapse
Well with persistence I finally got this to work.
There is another link farther down in your link which I think has easier to understand instructions:http://forum.xda-developers.com/showpost.php?p=45487258&postcount=55
However, the real key comes in step 3.
I got stuck on step 3 for a while because your link shows three different options for downloading. I assumed that all three were the same. Actually option A and C are the same (http://d-h.st/qEY). They seem to be a TWRP backup. I checked the md5 of my download and unzipped this file to the TWRP backup directory on my phone. But no matter what I tried it always failed to restore.
I finally figured out that option B is a different download (https://mega.co.nz/#!vwJGhYjb!A6D3TjhtSxhPOQwYJZR373gH418YeN3hTfC6uSgJSZA) and it is actually a ClockworkMod backup even though it is labeled as TWRP. So I flashed ClockworkMod to my recovery and unzipped this download to the ClockworkMod backup directory on my phone. I was then able to successfully restore this backup and downgrade my phone to 1.26.502.10.
After that I just had to relock my bootloader, and use the RUU file to get to 1.26.502.12.
I then unlocked the bootloader again, flashed TWRP to my recovery again, and used that to root the 1.26.502.12 install.
I was then able to finally use revone successfully to S-OFF the phone, remove the tampered tag from the bootloader, and set my SUPERCID.
Finally, I installed Android Revolution 41 mod running Android 4.4 and everything is working great!
Thanks!

Unlocking 'relocked' bootloader with hboot 1.55 and S-OFF

Well, I'm usually able to dig myself out of messes I get myself into but this one has had me hunting a few hours. Here's the run-down.
1) S-OFF with 1.44 a while ago, rooted and unlocked bootloader
2) Got camera problem, would like to return phone to stock for warranty
3) Flashed a stock RUU, went fine. Stock recovery and bootloader work fine, hboot was upgraded to 1.55 (my mistake, should have noticed this)
4) Got sidetracked when trying to lock the bootloader and entered fastboot oem lock
So now I have a 're-locked' bootloader on 1.55 with S-OFF. I don't want to unlock through HTCDev, I can't use revone to unlock because I'm on 1.55, and I don't have a custom recovery, and can't flash one because I'm relocked.
Any ideas how I can unlock the bootloader here (or downgrade hboot, I have the zip but can't flash it)? I can probably handle the rest myself, after I smack myself over the head a few times.
The goal here is to have the bootloader 'LOCKED', and I'll then take my chances with S-ON, with the latest firmware but a downgraded (1.44) bootloader before handing it over for warranty purposes.
OK, it looks as though I can patch hboot files OK. Will take a look around for a patched one.
Hboot 1.44 will unlock using revone. Make sure to be on 1.x.x based ROM right after
sent from my mobile device
SaHiLzZ said:
Hboot 1.44 will unlock using revone. Make sure to be on 1.x.x based ROM right after
sent from my mobile device
Click to expand...
Click to collapse
Sorted, thanks. Found an older ROM that flashed fine with supercid. Think I'll keep S-OFF and just lock the bootloader. With this being a likely hardware issue I'm hoping I'll be fine with just that.

[Q] Need help figuring out how to update

I have an ATT M7. I am on T-Mobile. The phone is now unlocked. It is still running Android 4.3.
ATT software update doesn't find any updates - presumably because I need an ATT sim in there.
So how can I upgrade this to 4.4 and later 5.0?
Thanks!
808phone said:
I have an ATT M7. I am on T-Mobile. The phone is now unlocked. It is still running Android 4.3.
ATT software update doesn't find any updates - presumably because I need an ATT sim in there.
So how can I upgrade this to 4.4 and later 5.0?
Thanks!
Click to expand...
Click to collapse
post your fastboot getvar all please without imei and serial number
808phone said:
I have an ATT M7. I am on T-Mobile. The phone is now unlocked. It is still running Android 4.3.
ATT software update doesn't find any updates - presumably because I need an ATT sim in there.
So how can I upgrade this to 4.4 and later 5.0?
Thanks!
Click to expand...
Click to collapse
convert the phone to Developers Edition
http://forum.xda-developers.com/showpost.php?p=58087799&postcount=11
http://forum.xda-developers.com/htc-one/general/stock-rom-reset-developer-edition-t2915170
Thanks @alray
So I did more reading and yes developer edition or change CID and MID to T-Mobile
All require S-OFF.
So I need to unlock boot loader, install TWRP, S-OFF. etc?
This is the blue Best Buy version ATT - but ATT just unlocked it.
M7_UL PVT SHIP S-ON RH
HBOOT 1.55
Radio-4T.20.3218.13
808phone said:
So I did more reading and yes developer edition or change CID and MID to T-Mobile
All require S-OFF.
So I need to unlock boot loader, install TWRP, S-OFF. etc?
This is the blue Best Buy version ATT - but ATT just unlocked it.
M7_UL PVT SHIP S-ON RH
HBOOT 1.55
Radio-4T.20.3218.13
Click to expand...
Click to collapse
thats why I asked for your fastboot getvar all, unlock your bootloader and use rumrunner to s-off, do not take any updates until you get s-off as it gets harder the higher HBOOT you have.
Seanie280672 said:
thats why I asked for your fastboot getvar all, unlock your bootloader and use rumrunner to s-off, do not take any updates until you get s-off as it gets harder the higher HBOOT you have.
Click to expand...
Click to collapse
S-OFF now by using sunshine. I do have ADB and Fastboot working from my previous use with HTC One S.
808phone said:
OK, I believe I am S-OFF, just used sunshine.
Click to expand...
Click to collapse
well from there you can either follow clsA link and change to developer edition, which will require changing cid, mid and flash the RUU, dev edition gets the quickest updates, although its very touch and go at the moment as to whether the M7 is going to get anymore updates, or you can do the same with the latest T-mo RUU which is here: http://www.htc.com/us/support/htc-one-t-mobile/news/ that will also require you to change your cid and mid, after doing that follow the manual instructions on the HTC site, download link for the RUU is at the bottom.
Thanks!
Seanie280672 said:
well from there you can either follow clsA link and change to developer edition, which will require changing cid, mid and flash the RUU, dev edition gets the quickest updates, although its very touch and go at the moment as to whether the M7 is going to get anymore updates, or you can do the same with the latest T-mo RUU which is here: http://www.htc.com/us/support/htc-one-t-mobile/news/ that will also require you to change your cid and mid, after doing that follow the manual instructions on the HTC site, download link for the RUU is at the bottom.
Click to expand...
Click to collapse
808phone said:
Thanks!
Click to expand...
Click to collapse
at&t phones already have the required MID to flash the dev edition ruu (pn0712000) Only need to change the cid
alray said:
at&t phones already have the required MID to flash the dev edition ruu (pn0712000) Only need to change the cid
Click to expand...
Click to collapse
Darn it. Read this too late. OK, I changed CID to T-MOB010 and MID to PN0713000.
At this point, do I just run an RUU at some point? Hope it works.
808phone said:
Darn it. Read this too late. OK, I changed CID to T-MOB010 and MID to PN0713000.
At this point, do I just run an RUU at some point? Hope it works.
Click to expand...
Click to collapse
Yes this one >> http://www.htc.com/us/support/htc-one-t-mobile/news/
clsA said:
Yes this one >> http://www.htc.com/us/support/htc-one-t-mobile/news/
Click to expand...
Click to collapse
I used Sunshine to get S-OFF. Everywhere I read, it says I need to have the boot loader locked to apply the RUU. However, while contacting the sunshine authors, they told me that despite what I have read, I don't have to relock. Is this true?
808phone said:
I used Sunshine to get S-OFF. Everywhere I read, it says I need to have the boot loader locked to apply the RUU. However, while contacting the sunshine authors, they told me that despite what I have read, I don't have to relock. Is this true?
Click to expand...
Click to collapse
no you dont need to lock as your s-off, unlocked is fine.
locked / relocked for flashing firmware or RUU's is only required for s-on users and limited to 1 step forward or current only.
So now the ruu times out on sending.......
So I extracted the rom.zip. If I flash it from twrp since it has a recovery image in it, will it overwrite twrp?
I'm assuming yes and then I would have to fast boot twrp back again.
Is this correct? Thanks
Gave up and installed Maximus HD. Works fine. Just wanted to be on 5.0 to test things.
808phone said:
Gave up and installed Maximus HD. Works fine. Just wanted to be on 5.0 to test things.
Click to expand...
Click to collapse
Anyone know what the first part of this means? (unaligned ruu)
Where would I get this????
> Use an unaligned ruu or a matching hboot ruu

HTC one m7 at&t need to update

Hey Guys
I really need your help. I have HTC one m7 at&t Android version 4.1.2 and software version 1.26.502.12. I made unlock bootloader but I cant make s-off.
My h-boot 1.44. I used revone always giving me " error code =-06".
I tried to flash it with RUU but didn't take flash, also I tried OTA but the same. I tried everything.
So I need your hep how to make s-off. Or I need update flash compatible to my phone with s-on.
PN0712000
cws_001
Thanks.
Ahmad-ak said:
Hey Guys
I really need your help. I have HTC one m7 at&t Android version 4.1.2 and software version 1.26.502.12. I made unlock bootloader but I cant make s-off.
My h-boot 1.44. I used revone always giving me " error code =-06".
I tried to flash it with RUU but didn't take flash, also I tried OTA but the same. I tried everything.
So I need your hep how to make s-off. Or I need update flash compatible to my phone with s-on.
PN0712000
cws_001
Thanks.
Click to expand...
Click to collapse
Is your phone on the at&t network? If not you willl not receive ota updates and flashing ota update manually requires S-OFF. Try rumrunner S-OFF. Once S-OFF change your CID so you can flash the Dev edition RUU and receive ota updates normally.
My phone is AT&T but I can't update because I am not using the same carrier. Rumrunner will not work because my hboot 1.44.000 even revone didn't work. So please help me to make s-off
Ahmad-ak said:
Rumrunner will not work because my hboot 1.44.000 even revone didn't work. So please help me to make s-off
Click to expand...
Click to collapse
Then update your hboot to 1.54/.1.55 using a RUU
this one for example: http://www.htc1guru.com/dld/ruu_m7_...3_10-38j-1157-04_release_334235_signed_2-exe/
Once the RUU is flashed (and hboot updated) unlock the bootloader, flash twrp recovery, root the phone and achieve s-off using rumrunner
Or you can buy sunshine s-off for 25 if you want to make it simple.
I tried with RUU flashs but also not working
Ahmad-ak said:
I tried with RUU flashs but also not working
Click to expand...
Click to collapse
What is the problem exactly when flashing the RUU?
Error 158. It doesn't flash. Taking in consideration that I'm choosing the right flash.
Is there any way to flash hboot alone or change cid with s-on,?
Ahmad-ak said:
Error 158. It doesn't flash. Taking in consideration that I'm choosing the right flash.
Is there any way to flash hboot alone or change cid with s-on,?
Click to expand...
Click to collapse
And this is using the RUU linked above? 3.17.502.3?
No you can't change your CID with s-on.
alray said:
And this is using the RUU linked above? 3.17.502.3?
No you can't change your CID with s-on.
Click to expand...
Click to collapse
I tried all the guru RUU flashed that suitable to my phone's CID. I think I need to make s-off for now.

Categories

Resources