Hello.
I have had my Vario III for a few months now, and for the last 2 months it has (every now and again) stopped playing my text message and ringtone sounds when people are calling/texting. No vibrate either, so I have no idea if someone is calling unless I'm looking at the phone. The sound is on full, and my MP3s still play so it doesn't make sense.
I also checked the settings in the sound and notifications part to see if the tune is still selected which confused me more. Sometimes it is still the same (you can press play for a preview and it will still play, yet not when someone actually rings/texts) and sometimes it has been set to default.
I've never had this problem on the Vario I so don't understand why it should happen on an upgrade!
Any help would be greatly appreciated. Many thanks.
OK guys,
I just had my "faulty" Diamond replaced - it wasn't ringing on calls, but all other sounds were OK. This is not the same issue that people have had with SMS notifications etc etc.
Basically only a hard reset cured the issue, but it came back after a few days.
Since using the new one I think I worked out what it could be, and it might be very embarassing.....part of it is to do with the stupid way HTC have implemented the volume behaviour in Touch Flo, and their philosophy of "why press the screen once when you can press it 3 or 4 times"! Dismissing email, missed call and SMS notifications from the Home screen anyone? - need I say more.
Anyway, the problem <I think> stems from the way they changed the volume feature. (and operator error).
In WM6.x native, if you turn the system volume off, then the ringer turns off - if you turn it up the ring stays off - BUT both volumes are seen on one screen. So it's obvious.
In Touch Flo there are 2 separate screens!! System Volume, then an Arrow left to "Ring Volume".
Anyone who has the apparent "no ringing" press the up or down volumne, then make sure you hit the arrow left for "Ring Volume".
My sample size is 1, so this maybe coincidental, but I hadn't realised it worked this way.
For those of you with the problem, please check the "Ring Volume" level and get back to us.
See the pic attached.....
Sorry to burst your bubble, but the 'no sound on calls' problem has been seen to happen when the system volume and ring volume have been at maximum. Indeed this has also been seen to happen on WM6.x native, where as you say, both levels are visible.
I was meaning the incoming calls do not ring at all- the sound when speaking still works.
Is that what you meant?
If yes then that's a pain - I was hoping it could be the end of my troubles!
This may or may not be relevant, but, I never change the volume (system or ringer - they're both set to max) and indeed I've even remapped the volume hardware buttons to other functions but on occasion I find that whilst my system volume remains on max my ringer volume has gone right down to zero.
It certainly wasn't me that did it - at least not directly through any positive action related to changing the volume anyway.
I cannot seem to reproduce this problem, and so for now it seems to occur randomly (of course I'm sure there is a definite trigger - I just haven't found it yet!).
Mathew
that is odd - whatever is causing it then, it might be ringer volume related...
This Has Solved The Problem On My Touch Diamond...will Probably Post In A Couple Of Days To Indicate Whether The Problem Has Returned...if You Don't Hear From Me In This Thread Again Then The Problem Can Been Seen As Solved For Good.
All The Best
Sid
no sound.
hi. just got my new diamond. it powered up alright, installed all the necessary apps and sounded great. I also adjusted the system and the ringer volumes to around 80% of max.
but if i use the phone after around 15 minutes, there is not sound. no audio player sound, either songs or incoming calls or sms or anything. its just dead silent.
wanted to go to the shop to have it replaced, but before that, i wonder if anyone can help me and tell if this problem can be solved myself.
i guess i will wait for a reply before going for a replacement.
ahmarismail said:
hi. just got my new diamond. it powered up alright, installed all the necessary apps and sounded great. I also adjusted the system and the ringer volumes to around 80% of max.
but if i use the phone after around 15 minutes, there is not sound. no audio player sound, either songs or incoming calls or sms or anything. its just dead silent.
wanted to go to the shop to have it replaced, but before that, i wonder if anyone can help me and tell if this problem can be solved myself.
i guess i will wait for a reply before going for a replacement.
Click to expand...
Click to collapse
Bad news mate. But that problem is slightly different to the topic - it's only the ring volume which doesn't work for me and certain other people.
All other sounds work just fine.
Phone not ringing, vibrating or flashing for incoming calls
I am also having the same problem with my Diamond. The phone is not ringing/lighting up/vibrating or anything when someone is calling me. I have tried calling my phone myself to just watch it remain black. I REALLY hope someone somewhere finds a solution to this problem, or I may just throw it against the wall
I also had the same problem with my Telus CDMA diamond - sound worked fine, then after a random amount of time after power off, there would be no sound - no ring, no mp3 audio, nothing. Sound would be restored after soft reset, but would again disappear sometime after being powered down. I tried everything to fix - reflashed various roms, SRS WOW driver, everything - no fix to be found. The only way I could prevent the sound from disappearing was to use the "not suspend power" option of S2U2 - sound was maintained but it sucked battery like crazy. So, I returned the phone for exchange - they exchanged no problem. I haven't had a problem since with the new phone.
Phone not ringing for incoming calls
I've had this problem twice in the last couple of days. After testing a few scenarios I have been able to reproduce this problem on my TD. Like other users, the problem that I was experiencing was that my TD would not ring upon an incoming call. It would flash the screen and show caller ID, but no sound. Ring volume and system volumes were both at max.
I have been using an alarm application, G-Alarm v0.6.4. This app was installed to the device memory. After setting a test alarm and cancelling it, I then called my TD and the problem was reproduced. Are any other TD owners with this bug also using G-Alarm? (I also found that the G-Alarm was not stopping by pressing "Stop", so thought it was a bit buggy.)
I could restore the phone ringer by opening Settings -> Sounds & Notifications -> Notifications. I found that my original ring tone for an incomming call had changed by itself. When I restored the ringer to my chosen ringtone, problem solved.
I uninstalled G-Alarm and so far so good.
I'm interested to see if any others with this problem are using G-Alarm or any other 3rd party alarm app.
Regards,
Paul
Paul, I also seemed to have run into the same issue with g-alarm. I say seem because although I did a hard reset the issue has persisted. The issue seems to frequently crop up when I switch sound profiles.
I've the same problem. No Sound after some call or others sounds play. When this happens and if I receive a call the others not listen my voice. This means that when audio disappear, speaker and also microphone not work, like the system can't comunicate with them. The volume control not resolve my problem. I've done HR and with nothing installed in my phone the problem come back again after few minutes. So it's not a problem of third part bad software, but htc orginal software or hardware problem.
Anyone solve it o have idea?
Thanks!
Perfect solution sickboy555 - I feel a right twit!!!!
no sound
So, for me, the Diamond is a dead brick - just good to look at, with no sound after 15 or even 10 minutes of standby.
can anyone just tell me if this type of a problem may be related to 1. Hardware, or 2. software.
I've given it to the shop from where i bought it from, but they keep on returning me the phone after a week to 10 days, telling that it's been fixed now. But the problem still persists, and I keep on giving them the brick back again and again.
Frustrated, i wonder if I can fix it myself, or just go to the shop, and throw it against the wall and count the pieces !!!!!!!!
fleabane said:
Perfect solution sickboy555 - I feel a right twit!!!!
Click to expand...
Click to collapse
glad to have helped!
I'm not sure if there is a real hardware issue as well. Are the others with the "same" problem sure they followed the guidance????
Hi Sickboy555,
yes I checked your advice but this wasn't the cause of the problem for me. As posted earlier, for me it was caused by my G-Alarm application. It's been over a month now since uninstalling G-Alarm and the problem hasn't returned since.
you are the man,thank you.
Thanks. My incoming ring tone problem has been solved.
er...sorry..wat is the solution again?? i dun really get it...
Hihi,
I just recently updated my N1 to FRF83 on stock all the way and have started to experience a problem during my incoming calls and would like to ask if anyone else experiencing this as well.
Even after setting all volumes (notifications,ringing,media etc etc) to 100%, whenever I get an incoming call the phone doesn't ring and it only vibrates/LED trackball.
I've doubled checked that there isn't any contact-specific settings for ringtones and also tried using a volume control app to 100% all volumes. Also checked that its not a speaker problem cos the chosen ringtone plays alright on music players. Also tried both custom ringtones and default ringtones and there's no difference.
Been using my sister's phone to call my phone and the thing is that this situation is not consistent.
Sometimes it rings without any issue. Sometimes the ringtone rings for 3-5 secs and silences. Sometimes it does not ring while trackball/vibrate activates. Sometimes it does not ring and trackball/vibrate does not activate as well. The issue is equally inconsistent regardless of whether the phone is on standby(screen off) or active(screen on).
Thanks in advance if anyone can help
I have the same issue with the FRF91 build of Froyo. Looks like the Google forum has a bunch of people reporting this as well.
I'm going to try to go into recovery and clear the cache. If it doesn't work I'll wipe the phone and see if that fixes it.
Just got a Nexus S a couple of days ago and so far I'm loving the pure vanilla. But I am having an odd problem with Tasker, which I used extensively on my previous Evos. When I set up the profile to rotate custom MP3 ringtones using Tasker, what I'm finding on the Nexus is that Tasker doesn't actually mute or replace the default ringer like it did on my other phones. So when I get a call, I hear two ringtones: the default, and Tasker's MP3. I fixed that issue by simply assigning "silent" as the phone's default ringtone. But something still isn't right, because if I choose to decline a call by using the slider button, Tasker doesn't cut off the MP3 ringer right away. I still hear the entire 25-30 second clip, even if I decline the call five seconds after the clip starts. I've thought about changing the trigger from "phone ringing" to the state "incoming call" to see if that makes a difference, but I rotate about 15 different ringtones, and setting up those profiles takes some time. Is there something funky about Tasker's integration with the Nexus that I haven't researched yet?
i'm facing the same problem, where u able to solve it?
Hi,
since ~2weeks ago when I got message in messenger, it vibrates one short and one long. In the past it was only 1 short..
Not all phone affected, in the family there is another p30pro, everything is the same, and that is fine.
In local forum another huawei phone has this issue.
Anybody faced with this? Any solution?
You changed your notification sound?
nope, no changes.
found this..: https://prohardver.hu/dl/upc/2020-04/167156_screenshot_20200414_143648.jpg
disable the always vibrate. now the long bzzzz bzzz changed to short bz bz.
There is a section in the notifications of the app that shows you notifications of chat bubbles, chat and calls, stories, among others and you must modify one by one to disable vibration, and it is only activated when the smartphone is in vibration mode