As the title says... When the phone is on normally adb works but in fastboot it isn't detected. I have tried everythinggggggg.
If you're using a PC with Windows 8.1 it won't recognize it. You'll need to find an older OS to get it to work with ADB.
Barman49 said:
If you're using a PC with Windows 8.1 it won't recognize it. You'll need to find an older OS to get it to work with ADB.
Click to expand...
Click to collapse
I'm on Windows 7
Are you inrecovery or Bootloader for Fastboot?
Sent from my HTCONE using Tapatalk 4
Bootloader... And the phone even says fastboot usb
Having the same issue as op and I'm on windows 8. It worked before because I'm S-OFF and unlocked and so forth which needed some fastboot commands if I remember correctly.
Sent from my Nocturnal Google Edition CDMA 5.0 using Tapatalk 4
Yeah I'm attempting to get a off to flash 4.3
FrostyF7 said:
Yeah I'm attempting to get a off to flash 4.3
Click to expand...
Click to collapse
Hey I was having the issue too of the PC not seeing the phone in fastboot or recovery and what I had to do is switch USB ports! Dumb yeah but once I plugged into another port the commands work and it shows up! Hopefully that's what you are dealing with too!
Sent from my Nocturnal Google Edition CDMA 5.0 using Tapatalk 4
It will work on 8 but as soon as I updated to the 8.1 preview I couldn't get it to recognize the phone using fastboot.
If you're on 8 I just installed the HTC drivers and it worked. Not sure if it's that simple or I just got lucky.
I have all drivers installed already and have tried reinstalling them.
I have quite the opposite problem. :/ no adb in OS, but works in recovery.
Bump
I had that problem with Windows 8.1. But then I got the OTA update before I rooted and that updated my bootloader. After that I had no problems with fastboot. But if you want s-off, I don't recommend you update the bootloader. You won't be able to get s-off.
Sent from my HTCONE using Tapatalk 4
I have 2 PCs running Windows 8. One has 2.0 usb and 3.0 usb. The other only has 3.0 usb. I found that as long as I use the 3.0 usb ports fastboot is not recognized. Are you guys using 3.0 usb ports? 2.0 usb always works for me.
javi_06 said:
I have 2 PCs running Windows 8. One has 2.0 usb and 3.0 usb. The other only has 3.0 usb. I found that as long as I use the 3.0 usb ports fastboot is not recognized. Are you guys using 3.0 usb ports? 2.0 usb always works for me.
Click to expand...
Click to collapse
I have 5 USB 2.0 and 4 USB 3.0 I tried 3 of the 2.0's and I already knew 3.0 wouldn't work.
I had no issues on 8 used different USB ports. Since installing the 8.1 preview nothing works. I'm starting to think that the OTA with the new hboot is what is fixing it.
Sent from my Nexus 7 using Tapatalk 4
Should I just ruu and start over?
Sad that the new Hboot will most likely make S-Off such a pain to deal with from now on though.
Sent from my HTCONE using Tapatalk 4
Make sure USB Debugging is on and plug in your phone
1. right click my computer and choose properties
2. choose Device Manager
3. find your phone and right click and choose properties
4. click the driver tab and choose update driver
5. choose Browse my computer
6. choose let me pick
7. it should give you list of HTC drivers choose the one that says HTC MTP( or similar) and click next it will install the driver and you should be golden
I have helped several folks rescue their phones and get s-off remotely and this always fixed the driver problem.
And as noted in the thread it does not work if you are running Win8.1
---------- Post added at 04:17 AM ---------- Previous post was at 04:15 AM ----------
FrostyF7 said:
Should I just ruu and start over?
Click to expand...
Click to collapse
Check PM
---------- Post added at 04:24 AM ---------- Previous post was at 04:17 AM ----------
SuperiorEVOlution18 said:
Sad that the new Hboot will most likely make S-Off such a pain to deal with from now on though.
Sent from my HTCONE using Tapatalk 4
Click to expand...
Click to collapse
That's why we don't update our hboot
bigdaddy619 said:
Make sure USB Debugging is on and plug in your phone
1. right click my computer and choose properties
2. choose Device Manager
3. find your phone and right click and choose properties
4. click the driver tab and choose update driver
5. choose Browse my computer
6. choose let me pick
7. it should give you list of HTC drivers choose the one that says HTC MTP( or similar) and click next it will install the driver and you should be golden
I have helped several folks rescue their phones and get s-off remotely and this always fixed the driver problem.
And as noted in the thread it does not work if you are running Win8.1
---------- Post added at 04:17 AM ---------- Previous post was at 04:15 AM ----------
Check PM
---------- Post added at 04:24 AM ---------- Previous post was at 04:17 AM ----------
That's why we don't update our hboot
Click to expand...
Click to collapse
That's why I don't want to RUU stock and take the OTA, hopefully they'll be another way to update the firmware since it just doesn't like my phone lol Idk why I can't get it to work honestly
Sent from my HTCONE using Tapatalk 4
Related
Gingerbread is now available to everyone!
Flash this file over anything and you will have GB!
Mediafire:
ZV4
ZV6
ZV7
ZV8
ZV9
MD5V4- bfcf8ec006bca32784c188d031c6202f
V6- 18d40c7dac1b6b428751ef3d3037efb6
V7-754799d76b450bce2c295ba20918332d
V8-81da3d04c95a2cccfee8953568bb30b1
V9-1d2ff6d22cd70adc2dc719e44f9f8613
Let the fun begin!
Instructions:
0. Install the software that pops up when you plug in your phone.
1. Get the LGNPST Package with the GenericModels and Components Plug-In.
http://www.mediafire.com/download.php?cghufvvn43m7bam
2. Get the driver for the phone and install it
http://www.lg.com/us/support/mc-support/drivers/LGAndroidDriver_Ver_1.0_All.exe
3. Get the Stock Rom TOT file and extract it.
[B]POSTED ABOVE[/B]
4. Get the DLL file specifically for the Revolution
http://www.mediafire.com/?4gdq6dsm643v9ur
5. Extract the "LGNPST Store & Lab"
6. Install the following order:
a. LGNPSTv1.2_Store_Version.msi
b. LGNPST_v1.2_Lab_Version.msi
c. Components >> LGNPST_Components_Ver_5_0_12_0.msi
d. GenericModels >> LGNPST_GenericModels_Ver_5_0_10_0.msi
7. Run "Right_Click_Register_DLL.reg"
8. Make a new folder called "Models" in the program's directory
Default: "C:\LG Electronics\LGNPST\"
9. Grab the "VS910.dll" and put it in the "Models" folder.
10. Right Click "VS910.dll" and click on Install/Register.
Note: DLL WILL NOT INSTALL UNLESS COMPONENTS AND GENERICMODELS PLUG-INS ARE INSTALLED!!!
IF YOU CANNOT INSTALL IT ON A RIGHT CLICK GO TO "C:\Windows\System32" and drag the VS910.dll on "regsvr32" and it should install.
a. Make sure you install it properly
b. REBOOT!!
11. Run "LGNPST"
12. Plug in your phone, use Internet Connection Mode,and enable USB Debugging.
13. Phone should pop up in the list
14. Select the phone and click on the Open folder button inside the .BIN query underneath the COM## details.
15. Since it wants a .bin file, you can open the .TOT file by typing "*.*" inside the File Name query and hitting Enter
16. Select "VS910ZV4_04.S4_04.P58008.R5.user.tot" and Click OK
17. Then click on Upgrade
18. Wait a few minutes
19. Voila
Click to expand...
Click to collapse
where did you get that?
is this stock rooted or unrooted?
that's freaking awesome
even though i already have GB but this is great as for backup
thanx
been waiting for this before i try a few other tweaks to my revo
wooow that's a hugh file
SuperCharger GingerVolt / R U?
How wonderful, tired of waiting for the OTA! Thanks a million!!
Worked perfect, flashed right over!
My phone wont pop up on the list
Torin_93 said:
My phone wont pop up on the list
Click to expand...
Click to collapse
Install the VZ/LG software that comes up as soon as you plug in the phone. Do not change the connection mode, it will interrupt the software installation.
You are friggin awesome!! I don't need it now but you never know..
sent from my Iconic Red GingerVolt
I really appreciate this as I have yet to receive GB. I will give this a try this evening.
Sent from my VS910 4G using xda premium
Torin_93 said:
My phone wont pop up on the list
Click to expand...
Click to collapse
What mode did you have your phone in? I think its made me have it in internet the last couple of times I did the tot for v4 &v6... Did your pc recognize your phone? Did you put the vs910.dll in the proper folder? We need more info on what you steps you have done what OS your running? If you was able to register the DLL? The more into we have the better we can help guide you in the right direction.
Sent from my VS910V6 stock soon to be V7 rooted and ROM in the next 12hrs. using XDA App
If you're having trouble getting the vs910.dll to install and keep getting the "Windows7 RegSvr32 Error 0x80020009" message then try this:
Start (Win Key) > type uac > ENTER
Pull slider down to Never notify > OK
Restart computer
try installing vs910.dll again
just make sure you go back and put the slider where it was after you are done upgrading the software on your phone. This worked for me and I'm running windows 7 64bit.
adrenaline_rush said:
Install the VZ/LG software that comes up as soon as you plug in the phone. Do not change the connection mode, it will interrupt the software installation.
Click to expand...
Click to collapse
Boom! That was it. Now for the rest of the steps!
Thank you!
---------- Post added at 08:54 AM ---------- Previous post was at 08:46 AM ----------
Ok, now im trying to get vz7 on here (step 7) Do I type this?
VS910ZV7_10.S7_10.P58008.R5.user.tot
Why can't this be easier it shows a device but as unknown but it also displays vs910 yet i still can't do anything
Sent from my VS910 4G using xda premium
Torin_93 said:
Boom! That was it. Now for the rest of the steps!
Thank you!
---------- Post added at 08:54 AM ---------- Previous post was at 08:46 AM ----------
Ok, now im trying to get vz7 on here (step 7) Do I type this?
VS910ZV7_10.S7_10.P58008.R5.user.tot
Click to expand...
Click to collapse
Glad that worked. Are you talking about selecting the file to flash? I don't recall ever having to type anything manually other than *.* in the selection box for choosing the file to flash. To get the .tot file to appear you type in *.* in the File Type box then press enter. You will now see the v7.tot file and can flash it
---------- Post added at 09:27 AM ---------- Previous post was at 09:25 AM ----------
Beamer9408 said:
Why can't this be easier it shows a device but as unknown but it also displays vs910 yet i still can't do anything
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
Did you try installing the LG software that pops up as soon as you plug phone to computer?
adrenaline_rush said:
Glad that worked. Are you talking about selecting the file to flash? I don't recall ever having to type anything manually other than *.* in the selection box for choosing the file to flash. To get the .tot file to appear you type in *.* in the File Type box then press enter. You will now see the v7.tot file and can flash it
---------- Post added at 09:27 AM ---------- Previous post was at 09:25 AM ----------
Did you try installing the LG software that pops up as soon as you plug phone to computer?
Click to expand...
Click to collapse
Thank you sir! I am now updating!!!! Gingervolt 1.2 here I come!!!!!
Oh my god, I've hit the jackpot (couldn't help it). But srsly, I friggin love you. Can I have your babies? Or one at least?
I got on xda hoping to see this and my dreams came true. Finally got my gingerbread tater tots.
---
Sent from my Fusion-Powered Revolting Revolution using xda premium -- Powered by mtmichaelson and spc_hicks: Join the Revoltution!
---------- Post added at 02:04 PM ---------- Previous post was at 01:28 PM ----------
On a more serious note...Has anyone tried doing this on a Mac running Windoze in emulation with VMWare or Parallels?
My gut tells me I shouldn't attempt this, but if others have had success...
Yeah i have installed them from when it first came up that's what got me able to display a device yet its still showing unknown connected but it shows the software for vs910 idk whats up i give up lol
Sent from my VS910 4G using xda premium
Beamer9408 said:
Yeah i have installed them from when it first came up that's what got me able to display a device yet its still showing unknown connected but it shows the software for vs910 idk whats up i give up lol
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
EDIT: Nevermind, I thought you were replying to my post. durr.
Beamer9408 said:
Yeah i have installed them from when it first came up that's what got me able to display a device yet its still showing unknown connected but it shows the software for vs910 idk whats up i give up lol
Sent from my VS910 4G using xda premium
Click to expand...
Click to collapse
Did the VS910.dll register correctly without error? Internet connection mode/usb debugging? All the drivers installed? Also make sure you are using a direct usb port to the computer, with no extensions, and using the OEM cable.
I have all that done but i don't have the oem cable it messed up within the first month of me having the phone
Sent from my VS910 4G using xda premium
THANK YOU!! I've been waiting for this!!! your a stud. thanks for posting
Worked perfectly!!!
Sent from my VS910 4G using xda premium
Hi Developers,
I need your help i have been a fan of this site for some time now and have found very useful information here. now i need your help once again.
I tried to unlock the Bootloader and flashed TWRP and CWM but when i try to bring the device back up SU is not granted Root access. i tried over and ocer again.
When i try to reboot the phone Fastboot/Flash recovery/TWRP or CWM the device hands adn never comes back up.
I even tried to do a Facotry reset and start over. This also did not work.
Can you guys please guide me on truly doing a factory reset so that i can try this again?
Thank you very much for your help.
Rgrds,
Robert1c
If you want to reset to out of the box stock, run the ruu.
Sent from my HTCONE using Tapatalk 4 Beta
Robert1c said:
Hi Developers,
I need your help i have been a fan of this site for some time now and have found very useful information here. now i need your help once again.
I tried to unlock the Bootloader and flashed TWRP and CWM but when i try to bring the device back up SU is not granted Root access. i tried over and ocer again.
When i try to reboot the phone Fastboot/Flash recovery/TWRP or CWM the device hands adn never comes back up.
I even tried to do a Facotry reset and start over. This also did not work.
Can you guys please guide me on truly doing a factory reset so that i can try this again?
Thank you very much for your help.
Rgrds,
Robert1c
Click to expand...
Click to collapse
coal686 said:
If you want to reset to out of the box stock, run the ruu.
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
Hi Coal-
I tried that earlier. the 1st time through it saw my device but then blued screened my PC. then once rebooted i tried again and its not seeing my device anymore. any advice?
Robert1c said:
Hi Coal-
I tried that earlier. the 1st time through it saw my device but then blued screened my PC. then once rebooted i tried again and its not seeing my device anymore. any advice?
Click to expand...
Click to collapse
Hi Guys just an update. i was able to get TWRP installed but now it never actually launches the phone. when i reboot the phone it goes right into TWRP.
What am i doing wrong?
Robert1c said:
Hi Guys just an update. i was able to get TWRP installed but now it never actually launches the phone. when i reboot the phone it goes right into TWRP.
What am i doing wrong?
Click to expand...
Click to collapse
If you can get into recovery, just restore nandroid. Or flash a fresh rom.
Sent from my lair.
volk9029 said:
If you can get into recovery, just restore nandroid. Or flash a fresh rom.
Sent from my lair.
Click to expand...
Click to collapse
I tried running the RUU.zip but i get the attached error
Robert1c said:
I tried running the RUU.zip but i get the attached error
Click to expand...
Click to collapse
Make sure you are in the boot loader when running ruu and you have all the proper HTC drivers. If that's not it you can try searching Google for the error.
Dude. Just boot into recovery then on phone press mount usb. On your computer in your drives you should see your phones memory. Download a rom from the sprint htc one. Use this. http://www.androidfilehost.com/?fid=22962010882834713 Once downloaded drag zip to storage. Once done press unmount usb. Then on recovery press install from storage. Click on your rom zip. Let it install. Reboot your htc one. Your good. You should have no more issues.
Sent from my HTCONE using xda premium
eric00716 said:
Make sure you are in the boot loader when running ruu and you have all the proper HTC drivers. If that's not it you can try searching Google for the error.
Click to expand...
Click to collapse
he also has to relock his bootloader to run the RUU
Fyi, because I see it misused a lot, "Bricking" man's it won't even power on, be recognized by any device, etc. If it just won't go into its ROM then that isn't a brick.
Sent from my HTCONE using Tapatalk 4 Beta
Mine fits the description of bricked better... All stock, no root, just using it as a GPS, left it plugged into the car charger when I went into the store but turned the screen off (that thing gets HOT). When I came back, no led, no power, nothing. Have tried connecting to the wall charger that came with it, to USB 2 and 3 on computers, left it charging all night. Not so much as a flicker... The computers didn't recognize anything connecting to them either.
Long hold of power (with and without either/both volume buttons) has done nothing.
What is left to try? I would rather not lose all the pictures from my vacation, but need my phone back for work.
If its not rooted go to sprint and get urself a new one
Sent from my HTCONE using xda premium
HTC_M7 said:
If its not rooted go to sprint and get urself a new one
Sent from my HTCONE using xda premium
Click to expand...
Click to collapse
Thanks! thats what im thinking about doing. the screen says:
*** TAMPERED ***
*** RELOCKED ***
will they take it back adn give me a new one in this state?
THanks again!
Well it says it was tampered
Sent from my HTCONE using Tapatalk 4 Beta
Dang... Not good news, but I never played with it at all, so I should be OK. Really too bad about those pictures.
HTC_M7 said:
Well it says it was tampered
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
I think that will be an issue as well. i did find a few posts that talk about the RUU to take it back to stock where the two messages would go away but the mirrors where this is located (http://www.androidfilehost.com/?fid=22979706399752930) are all down.
I have the HTC One from Sprint. does anyone know where else i can find the RUU?
http://www.androidfilehost.com/?fid=22979706399752930
Sent from my HTCONE using Tapatalk 4 Beta
---------- Post added at 05:06 PM ---------- Previous post was at 05:06 PM ----------
Try again
Sent from my HTCONE using Tapatalk 4 Beta
HTC_M7 said:
http://www.androidfilehost.com/?fid=22979706399752930
Sent from my HTCONE using Tapatalk 4 Beta
---------- Post added at 05:06 PM ---------- Previous post was at 05:06 PM ----------
Try again
Sent from my HTCONE using Tapatalk 4 Beta
Click to expand...
Click to collapse
Looks like it may have been my machine. downloading now. thanks ill post an update in a minute.
Hey all! I have (had) a rooted HTC one.
In an attempt to install an Android 4.3 ROM, I've got my phone in 1 of 2 stages.
I have TWRP
When I tried to download the 4.3 ROM and reboot, it takes me back to the bootloader screen. If i try reboot, it continuity takes me back to this screen.
If i go to recovery, and attempt to wipe & backup, it says successful, however, upon a reboot, it goes through the motions, but android nor apps never loads and in about 20 seconds, the phone restarts and continues this process over and over again..
Can anyone help me just get my phone back please?
I feel like somethings just missing or do i need to factory reset?
Did you flash a Sprint rom?
bigdaddy619 said:
Did you flash a Sprint rom?
Click to expand...
Click to collapse
i used the one on htconeroot
which since you've said that, i noticed i misread the directions thinking it'd work for my phone because it was rooted. so i guess not.
what do i have to do now?
jaywill13 said:
i used the one on htconeroot
which since you've said that, i noticed i misread the directions thinking it'd work for my phone because it was rooted. so i guess not.
what do i have to do now?
Click to expand...
Click to collapse
Did you do the OTA update to 4.3?
bigdaddy619 said:
Did you do the OTA update to 4.3?
Click to expand...
Click to collapse
i tried (before my attempt to do 4.3 rom) but every time it downloaded and my phone restarted, it took me to TWRP and i didn't know how to get it to actually install to my device.
Just flash a firmware
Sent from my GT-I9082 using XDA Premium 4 mobile app
adi160699 said:
Just flash a firmware
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
how do i go about that?
Like flash a custom ROM or any android version
Sent from my GT-I9082 using XDA Premium 4 mobile app
---------- Post added at 02:47 PM ---------- Previous post was at 02:47 PM ----------
You can flash 4.2.2 firmware
Sent from my GT-I9082 using XDA Premium 4 mobile app
adi160699 said:
Like flash a custom ROM or any android version
Sent from my GT-I9082 using XDA Premium 4 mobile app
---------- Post added at 02:47 PM ---------- Previous post was at 02:47 PM ----------
You can flash 4.2.2 firmware
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
do i have to flash both rom and firmware, or one or the other?
Jaywill I did the exact same thing as you did, followed the wrong root guide to upgrade 4.3 on htconeroot. I too get booted into the bootloader screen consistently and after a factory reset/recovery it's stuck in a bootloop.
http://forum.xda-developers.com/showthread.php?t=2476053
It took me 8 hours last night to fix it, I eventually had to resort to relocking my bootloader and install the 1.29 RUU. Phone seems to work fine now.
Gr8 Good for you
Sent from my GT-I9082 using XDA Premium 4 mobile app
---------- Post added at 03:35 PM ---------- Previous post was at 03:35 PM ----------
jaywill13 said:
do i have to flash both rom and firmware, or one or the other?
Click to expand...
Click to collapse
Any one
Sent from my GT-I9082 using XDA Premium 4 mobile app
kadsura said:
Jaywill I did the exact same thing as you did, followed the wrong root guide to upgrade 4.3 on htconeroot. I too get booted into the bootloader screen consistently and after a factory reset/recovery it's stuck in a bootloop.
http://forum.xda-developers.com/showthread.php?t=2476053
It took me 8 hours last night to fix it, I eventually had to resort to relocking my bootloader and install the 1.29 RUU. Phone seems to work fine now.
Click to expand...
Click to collapse
thank you so much! did you lose everything on your phone?
kadsura said:
Jaywill I did the exact same thing as you did, followed the wrong root guide to upgrade 4.3 on htconeroot. I too get booted into the bootloader screen consistently and after a factory reset/recovery it's stuck in a bootloop.
http://forum.xda-developers.com/showthread.php?t=2476053
It took me 8 hours last night to fix it, I eventually had to resort to relocking my bootloader and install the 1.29 RUU. Phone seems to work fine now.
Click to expand...
Click to collapse
also, i looked at the post but it didn't contain any links. kind of confused at what the course of action is.
jaywill13 said:
thank you so much! did you lose everything on your phone?
Click to expand...
Click to collapse
jaywill13 said:
also, i looked at the post but it didn't contain any links. kind of confused at what the course of action is.
Click to expand...
Click to collapse
I did lose everything on my phone. I didn't had much on it though since I've only had the phone for two weeks.
The course of action is this:
First connect phone to your computer and get ADB going (hopefully you had USB debugging on)
Then follow this guide to get S-OFF and relock bootloader, make sure you booted into recovery:
http://forum.xda-developers.com/showthread.php?p=44243635
Then download RUU from this link
http://forum.xda-developers.com/showthread.php?t=2250904
and install on your PC.
kadsura said:
I did lose everything on my phone. I didn't had much on it though since I've only had the phone for two weeks.
The course of action is this:
First connect phone to your computer and get ADB going (hopefully you had USB debugging on)
Then follow this guide to get S-OFF and relock bootloader, make sure you booted into recovery:
http://forum.xda-developers.com/showthread.php?p=44243635
Then download RUU from this link
http://forum.xda-developers.com/showthread.php?t=2250904
and install on your PC.
Click to expand...
Click to collapse
that's the part i don't get is where do i find/access the adb?
First off I'm assuming you have the android SDK installed on your PC since you have rooted phones before.
You probably need a driver for your PC to recognize the phone. The one I used is this
http://forum.xda-developers.com/showthread.php?t=2263822
But you can also download and install the HTC Sync
Once your PC recognizes your phone and you are booted into recovery you can push ADB and fastboot commands to your phone.
kadsura said:
First off I'm assuming you have the android SDK installed on your PC since you have rooted phones before.
You probably need a driver for your PC to recognize the phone. The one I used is this
http://forum.xda-developers.com/showthread.php?t=2263822
But you can also download and install the HTC Sync
Once your PC recognizes your phone and you are booted into recovery you can push ADB and fastboot commands to your phone.
Click to expand...
Click to collapse
issue is, my phone can't stay on longer than 30 seconds
Hello everyone, I'm new here so I'm sorry I broke the law with a particular.
I have a problem on my HTC Sensation XL, after I had the original version of the producer decided to update .. Root and everything I did and downloaded the rom of King Cobra .. After installation cell phone it got stuck in a loop problem seems Sense .. I am looking for a normal rom download for a long time and found .. Cell phone belongs to my girlfriend and now is angry at me: (
So if anyone has a simple and regular Rom get me please I would love to mark important I'm from Israel and I have to rom will be in Hebrew please .. Thank you to those who help me appreciate it very much
Then did you know how you shall install official ROM?
This is what you need:
RUU_Runnymede_HTC_ISR
http://www.filefactory.com/file/c01...822_3822.11.10.30_M_release_231770_signed.exe
Thanks but I do not know to install regular rum and Not Working link
oshri433 said:
Thanks but I do not know to install regular rum and Not Working link
Click to expand...
Click to collapse
This is new one:
http://filescroptube.com/file/28191...822-3822-11-10-30-m-release-231770-signed-exe
and another one:
http://www.generalfiles.biz/downloa...822.11.10.30_M_release_231770_signed.exe.html
any more????????
Thank you
Is it complicated to install it on a cell phone?
oshri433 said:
Thank you
Is it complicated to install it on a cell phone?
Click to expand...
Click to collapse
No so far, if you unlocked phone only need to lock again with ASB, then connect to PC and run ruu.
Sent from my Sensation XL using XDA Premium HD app
I tried to do the installation of the version but the computer shows me an error .. Maybe we have to return the locking device?
And If so should lock how to do it please??
Someone please help me, I looked all over the internet, I can not find a way to lock the boot again :crying:
In the bootloader, connect the phone to the computer and chose "fastboot". On the computer (assuming you have fastboot in the forder you are in), launch a terminal and type "festboot oem lock". Then it's done.
Siphoné said:
In the bootloader, connect the phone to the computer and chose "fastboot". On the computer (assuming you have fastboot in the forder you are in), launch a terminal and type "festboot oem lock". Then it's done.
Click to expand...
Click to collapse
Ok thank I hope it's is this
Register it cell phone or computer?
I'm really sorry for all the posts..
I don't see terminal in the boot
If you cne tel me better how I do it I be happy
Please??
How did you unlocked the phone in the first place? The terminal means a Dos terminal in windows with adb & other supporting files in the folder. Type in "fastboot oem lock". Then run the RUU Israel you downloaded
Sent from my GT-i9300 using Tapatalk 4
You mean to cmd?
What is the adb?
Yes cmd in windows. Have you unlocked your bootloader? Search your computer for adb.exe, if it exist, all files you need for terminal commands are in the folder. Run cmd from that folder
Sent from my GT-i9300 using Tapatalk 4
---------- Post added at 07:32 PM ---------- Previous post was at 07:21 PM ----------
http://forum.xda-developers.com/showthread.php?t=2598802
Justplayinghard provided this thread, read it & all solutions can be found here
Sent from my GT-i9300 using Tapatalk 4
hansonchen said:
Yes cmd in windows. Have you unlocked your bootloader? Search your computer for adb.exe, if it exist, all files you need for terminal commands are in the folder. Run cmd from that folder
Sent from my GT-i9300 using Tapatalk 4
---------- Post added at 07:32 PM ---------- Previous post was at 07:21 PM ----------
http://forum.xda-developers.com/showthread.php?t=2598802
Justplayinghard provided this thread, read it & all solutions can be found here
Sent from my GT-i9300 using Tapatalk 4
Click to expand...
Click to collapse
So that means that the file is in a cell phone? Need to copy it from the mobile into a folder and then unlock record in cmd??
Go read Justplayinghard link I gave you
Sent from my GT-i9300 using Tapatalk 4
hansonchen said:
Go read Justplayinghard link I gave you
Sent from my GT-i9300 using Tapatalk 4
Click to expand...
Click to collapse
I connect to ״xl multi tool״ and I was registered there relock pressed it and everything worked out Thanks so much
Glad to hear you've fixed it
Sent from my GT-i9300 using Tapatalk 4
I accidentally wiped all the data on my HTC in TWRP as I was trying to upgrade to a different ROM, but it failed.
I can get into BOOTLOADER, but it comes up saying *** TAMPERED *** and *** UNLOCKED ***.
I can also get into Team Win Recovery Project v2.6.3.3.
When the phone boots it stays on the HTC screen and doesn't get any further because there's no ROM installed.
I've heard of ADB to try and push the ROM onto the phone, but can't find a tutorial on how to do it.
Any help which be much appreciated.
while in recovery:
Put your ROM file in the same folder as ADB
adb push your_rom_filename.zip /sdcard/
Back out so you can click on the install file on sdcard option and viola...
http://forum.xda-developers.com/showthread.php?p=53270352 last post, letter "E" has two more methods to fix your issue. Be sure to check the FAQ for common issues
Sent from my One using XDA Free mobile app
Uzephi said:
while in recovery:
Put your ROM file in the same folder as ADB
adb push your_rom_filename.zip /sdcard/
Back out so you can click on the install file on sdcard option and viola...
http://forum.xda-developers.com/showthread.php?p=53270352 last post, letter "E" has two more methods to fix your issue. Be sure to check the FAQ for common issues
Sent from my One using XDA Free mobile app
Click to expand...
Click to collapse
My computer doesn't even recognize the HTC! I've tried several different leads, including 2 genuine ones I bought off of eBay and it still doesn't detect it, doesn't even make a sound when I connect it! I've tried all the USB ports on my computer and have even tried using ADB/Fastboot on Ubuntu, but it still doesn't work!
I had a previous thread - http://forum.xda-developers.com/htc-one/help/bricked-htc-one-t2849008
Chaos Water said:
My computer doesn't even recognize the HTC! I've tried several different leads, including 2 genuine ones I bought off of eBay and it still doesn't detect it, doesn't even make a sound when I connect it! I've tried all the USB ports on my computer and have even tried using ADB/Fastboot on Ubuntu, but it still doesn't work!
I had a previous thread - http://forum.xda-developers.com/htc-one/help/bricked-htc-one-t2849008
Click to expand...
Click to collapse
Have you tried the OTG option to install a Rom from OTG SD?
Sent from my HTC6500LVW using XDA Free mobile app
Uzephi said:
Have you tried the OTG option to install a Rom from OTG SD?
Sent from my HTC6500LVW using XDA Free mobile app
Click to expand...
Click to collapse
Any chance you could send me a link? I'm so desperate to sort my HTC out and I'm running out of ideas .
Chaos Water said:
Any chance you could send me a link? I'm so desperate to sort my HTC out and I'm running out of ideas .
Click to expand...
Click to collapse
post 2 of @nkk71 guide has instructions for installing the drivers
http://forum.xda-developers.com/showthread.php?t=2541082