[Q] fastboot driver - wrong parameter win8 x64 - Xperia Z Q&A, Help & Troubleshooting

Hey there,
i was searching the forums but couldnt find any solution for my problem so i hope you could help me.
I tried to install all the needed drivers for my xperia z to use flashtool. first i disabled driver signing then i tried the installation - everything went fine except the fastboot driver. then i tried to install it manually but also that failed. only thing i recieve is an error message
cant post links at the moment so i have to improvisate a bit...
img401 imageshack us/img401/4443/3y0l.jpg
just fill the spaces with dots or watch the attached thumbnail (German anyway)
sorry for the inconvenience
--------------------------------------------------------------
Translation of the picture:
Driver update - unknown device
failure while installing drivers for the device
drivers for the device were found but while installing an error occured.
SEMC Flash Device
Wrong Parameter.
---------------------------------------------------------------
The version i tried to install was Sony sa0107 SEMC Flash Device Version: 3.0.0.0 [25.11.2011]
Win8 Pro x64
Is there a way to fix this problem?
Thank you for your help

Related

problem: Wlan on windows xp pro sp2

hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
en_ky said:
hello people,
i've installed windows xp sp2 with a step by step guide on xda (this one http://forum.xda-developers.com/showthread.php?t=436982) without problems.
At the end, when we have to install wlan drivers, i've noticed that marvell sdio sd8686 appear in the hardware list but there is also a yellow ! on this hardware with the error code number 10, windows cannot start hardware.
I've tried with some other drivers that i found on internet but with the same results. Someone can help me?
Click to expand...
Click to collapse
Hi en_ky!
I was following the other installation method "Installing Windows XP with Windows Post Install (WPI)" that you can find on this forum, but basically should be the same.
Anyway, regarding WLAN on the WPI method it says:
"13. WLAN: Drivers are copied to c:\wlandrivers, install from there when you are asked for them later". This step is just before installing CYGWIN
After finishing with SwapResolution,
"Now it usually asks about the WLAN drivers, see step nr. 13."
"If it asks about drivers for Windows Mobile, just answer yes until it finishes."
"To get Wifi working, you have to copy the "copy HTC Shift XP Drivers\WLAN\sdbus.sys to c:\windows\system32\drivers\ say yes to the replace dialog and reboot."
"DO THIS IN SAFE MODE ONLY. This is how I got mine to work. I had the same problem with the yellow and not working wifi code 10 in the device manager."
"If you copy this without being in safe mode, it will not work because after the reboot the system will replace the overridden version with the old one again."
So check again all the steps and do the last one in Safe Mode (I think here is your problem)!
Good luck!
thank you for your reply,
I tried to resolve my problem with help of windows update and an eterneth connection for internet. At first it doesn't start with the same yellow ! But after a restart, it starts!!!!
Many thanks to you in any case; i know that your answer will be usefull for another person with this problem!

[q] error flashing!!!! 12.0.a.2.254

My PC keep showing error messages when im flashing my xperia sp .
it said that : ERROR -
- ERROR - Error flashing. Aborted
-ERROR - Drivers need to be installed for connected device.
-ERROR - You can find them in the drivers folder of Flashtool.
-INFO - Device disconnected
-INFO - Device connected with USB debugging off
I already used the adb installer software and it said that the driver had been installed.
The USB debugging is on .
Help meee! Im running Windows 8 . :crying::crying::crying::crying::crying:
In windows 8 theres a diffrent method to install unsigned drivers
http://forum.xda-developers.com/showthread.php?t=2303046
Hope this helps
Install the drivers using this method
Win 8 is the problem.
Try this thread http://forum.xda-developers.com/showthread.php?t=2544270
Sent from my C5303 using xda premium

[SOLVED] adb error device not found CWM-Recovery

Hi,
Current setup :
Xperia z1 C6903
Three UK
Version 4.4.4
Build 14.4.a.0.108
Rooted
Unlocked Bootloader
adb drivers installed (on xp)
Trying to install Cyanogen Mod.
Flash boot boot .img all worked fine and have CWM recovery screen up.
When I try to use either sideload or adb push I get the same error:
error: device not found
I've googled and searched here and seems to be a driver issue with adb?
I have android SDK (eclipse) and SDK platform tools installed
any thoughts please?
....
...
SOLVED adb driver problem xp device not found
OK, working using universal driver from
http://www.koushikdutta.com/post/universal-adb-driver
Absolutely no idea why XP stopped seeing the phone, and no attempt at driver/sdk updates worked, tried all the ADB drivers I could find including one above, nothing...
then changed usb post after i uninstalled the device from manager (for the 100th time) and ran the adb installer again. and tada there it was :/
hopefully link above might help someone on xp get adb connection working if they are having problems..

[solved] Trouble installing Fastboot driver

Trying to unlock my Z3 compact bootloader and I'm stuck on trying to install the ADB Fastboot driver. I get the following error when I try to install through Device Manager:
"The hash for the file is not present in the specified catalog file. The file is likely corrupt or the victim of tampering."
I've tried searching the forums for info on this error but all I seem to find are posts from 2013 and earlier complaining about problems with Windows 8, and one suggestion to try turning off security checks for installing drivers which didn't work for me.
I'm using Windows 10, have downloaded and installed the latest Java SDK, Android SDK, and Google USB drivers, and I got the Fastboot driver from here on Sony's website. (Basically I've done everything this video describes up until the point the driver failed to install.)
Any help would be much appreciated!
Edit: Solved - I'm an idiot and missed the instruction about rebooting after disabling security checks for drivers!

Fastboot Driver Broken?

I just upgraded my computer with Windows 10. Everything seemed to work fine with upgrading but when I put my phone into fastboot,the prompt doesn't detect my device anymore (like it did with Windows 7)
Used :
http://forum.xda-developers.com/showthread.php?t=2588979
this...
http://developer.sonymobile.com/downloads/drivers/xperia-z1-c6902-c6903-c6906-c6943-driver/
and the Google USB driver from SDK tools but my PC still can't find my phone.
Flashing kernels won't help either.
Looked online but I can't seem to find an answer...any ideas to fix this?
you probably need to reinstall the drivers, you can use Flashtool-drivers.exe found in the flashtool/drivers folder.
but you also need to probably disable driver signature enforcement to install it, instructions can be found here:
http://answers.microsoft.com/en-us/...ment-win/a53ec7ca-bdd3-4f39-a3af-3bd92336d248

Categories

Resources