My PC keep showing error messages when im flashing my xperia sp .
it said that : ERROR -
- ERROR - Error flashing. Aborted
-ERROR - Drivers need to be installed for connected device.
-ERROR - You can find them in the drivers folder of Flashtool.
-INFO - Device disconnected
-INFO - Device connected with USB debugging off
I already used the adb installer software and it said that the driver had been installed.
The USB debugging is on .
Help meee! Im running Windows 8 . :crying::crying::crying::crying::crying:
In windows 8 theres a diffrent method to install unsigned drivers
http://forum.xda-developers.com/showthread.php?t=2303046
Hope this helps
Install the drivers using this method
Win 8 is the problem.
Try this thread http://forum.xda-developers.com/showthread.php?t=2544270
Sent from my C5303 using xda premium
Related
Hi guys, my EN is poor, SORRY
when i connect my xperia tx to my pc through flashmood (voloume down then connect), the pc freeze and i should restart windows, drivers installed
but the problem not exists with my friend laptop with same flashmode & phone drivers instillation
plz help me friends, its make me so sad
1) No need to change the font in your posts
2) Download flashtool from the first thread in the development section
3) Install it
4) Goto the installation directory (C:\flashtool) and open the driver folder
5) Run driver.exe
6) Tick boxes for flashmode, fastboot and TX
7) Try again.
8) Report back here if it works or not.
9) If not, then run flashtool and attach the phone in flashmode to the PC. Report back the log from flashtool
gregbradley said:
1) No need to change the font in your posts
2) Download flashtool from the first thread in the development section
3) Install it
4) Goto the installation directory (C:\flashtool) and open the driver folder
5) Run driver.exe
6) Tick boxes for flashmode, fastboot and TX
7) Try again.
8) Report back here if it works or not.
9) If not, then run flashtool and attach the phone in flashmode to the PC. Report back the log from flashtool
Click to expand...
Click to collapse
i do all steps before, but problem not solved (just on my pc no on my friend laptop)
the problem is just when i try go to flashmode (first post edited)
i searched on google and i see many ppls have same problem and cant find any solution's
this is the log:
Code:
19/059/2013 11:59:05 - INFO - <- This level is successfully initialized
19/059/2013 11:59:06 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
19/059/2013 11:59:06 - INFO - You can drag and drop ftf files here to start flashing them
19/059/2013 11:59:19 - INFO - Device disconnected
19/059/2013 11:59:52 - INFO - Device connected with USB debugging on
19/059/2013 11:59:52 - INFO - Connected device : LT30
19/059/2013 11:59:52 - INFO - Installed version of busybox : BusyBox v1.20.0 (2012-08-22 21:36:24 CDT) multi-call binary.
19/059/2013 11:59:52 - INFO - Android version : 4.1.2 / kernel version : 3.4.0-17382J-g2f4f874-00856-gaa0cc9c / Build number : 9.1.B.0.411
19/059/2013 11:59:54 - INFO - Root Access Allowed
Uninstall all android software. (Flashtool, pccompanion etc) and reboot and reinstall it.
Then try again.
Have you tried flashing something in flashmode yet?
I do all that u say
yes i flashed former tx jb with flash tool by my friend laptop
smfazel said:
I do all that u say
yes i flashed former tx jb with flash tool by my friend laptop
Click to expand...
Click to collapse
can you try it on your machine please and then post the output from flashtool...
I need to know what your machine is doing. It very much seems like a problem with your computer
gregbradley said:
can you try it on your machine please and then post the output from flashtool...
I need to know what your machine is doing. It very much seems like a problem with your computer
Click to expand...
Click to collapse
Are u aware??? !!!!!!!!
I say my pc freeze and can't get flashmode
Now I'm tryin inistall win 7 with xp
Sent from my LT29i using Tapatalk 2
Yes I am aware, but thanks for not telling me the information I wanted.
I will now just guess what flashtool says when your pc freezes....
Sent whilst sat on the toilet.
gregbradley said:
Yes I am aware, but thanks for not telling me the information I wanted.
I will now just guess what flashtool says when your pc freezes....
Sent whilst sat on the toilet.
Click to expand...
Click to collapse
Ha ha ha
Bro, when pc hangs or freezes, the pc & flashtool (& me) can't say anything's, just shold restart pc manually
Problem solved with win7
Sent from my LT29i using Tapatalk 2
cant able to flash kernel in my pc (xp) as my laptop is not working.using the latest version of flashtool installed all the drivers including gg and i may have done something to the drivers as i wanted tethering in winxp which i was not able to .any help on this matter would be good.my mobile is being recognized by pc
04/033/2013 19:33:39 - INFO - Opening device for R/W
04/033/2013 19:33:39 - INFO - Start Flashing
04/033/2013 19:33:39 - INFO - Processing loader
04/033/2013 19:33:39 - INFO - Checking header
04/033/2013 19:33:39 - INFO - Ending flash session
04/033/2013 19:33:39 - ERROR -
04/033/2013 19:33:39 - ERROR - Error flashing. Aborted
04/033/2013 19:33:40 - ERROR - Drivers need to be installed for connected device.
04/033/2013 19:33:40 - ERROR - You can find them in the drivers folder of Flashtool.
04/033/2013 19:33:41 - INFO - Device disconnected
Make sure the drivers are all installed, and that your USB cable is not jerky or anything.
Yea you need x8 driver.
Sent from my E15i using xda app-developers app
everthing is good and i installed the drivers from the folder and also gordons gate
reinstall flashtool and at the same time reinstall the drivers from the folder directory, that should solve it
@op pcc installed? just reinstall gg and keep trying. that often happens to me too.
reinstalled everything but still the same error ......pcc is not installed
nanda_123 said:
reinstalled everything but still the same error ......pcc is not installed
Click to expand...
Click to collapse
install pcc. there are drivers there that are needed. then reinstall gg and try a few times. hope it works.
cascabel said:
install pcc. there are drivers there that are needed. then reinstall gg and try a few times. hope it works.
Click to expand...
Click to collapse
yes it helped..first had to install pcc companion and then reinstall it for installing the drivers and after that it was detected by flashtool but was not able to flash and then a pop up of semc flash connected came win installed the drivers and i am done..thank u for u help
Hey there,
i was searching the forums but couldnt find any solution for my problem so i hope you could help me.
I tried to install all the needed drivers for my xperia z to use flashtool. first i disabled driver signing then i tried the installation - everything went fine except the fastboot driver. then i tried to install it manually but also that failed. only thing i recieve is an error message
cant post links at the moment so i have to improvisate a bit...
img401 imageshack us/img401/4443/3y0l.jpg
just fill the spaces with dots or watch the attached thumbnail (German anyway)
sorry for the inconvenience
--------------------------------------------------------------
Translation of the picture:
Driver update - unknown device
failure while installing drivers for the device
drivers for the device were found but while installing an error occured.
SEMC Flash Device
Wrong Parameter.
---------------------------------------------------------------
The version i tried to install was Sony sa0107 SEMC Flash Device Version: 3.0.0.0 [25.11.2011]
Win8 Pro x64
Is there a way to fix this problem?
Thank you for your help
HI,
when i tried to flash xperia sp i got this error ..plz help
- ERROR - Error flashing. Aborted
- ERROR - Drivers need to be installed for connected device.
- ERROR - You can find them in the drivers folder of Flashtool.
inot flashing?
babugd said:
HI,
when i tried to flash xperia sp i got this error ..plz help
- ERROR - Error flashing. Aborted
- ERROR - Drivers need to be installed for connected device.
- ERROR - You can find them in the drivers folder of Flashtool.
inot flashing?
Click to expand...
Click to collapse
the error message is telling you what to do. I think windows 8 makes it more difficult to use flash tools though.
rooting error
Parkside said:
the error message is telling you what to do. I think windows 8 makes it more difficult to use flash tools though.
Click to expand...
Click to collapse
i did flashing as per XDA instruction and it shows flashed but when i check wit root checker it shows not yet rooted , busy box ,super user not installed!!!!! and when i did it sencond time, while iam running RUN TIME exe it shows last "Installing busybox --- Remounting /system --- cleaning error: device not found --- Please wait device is now rebooting error: device not found" and after when i run again flash mode with XperiaSP_C530X_12.0.A.2.254_Kernel, it shows connected with flash mode and still showing the window "unplug ,back button and plug" no other responce..!!!! :fingers-crossed::fingers-crossed:
hello
Few minutes ago ive been trying to install new FW for xperia t suddenly flashtool says that i dont have drivers for my phone. So ive installed drivers for flashmode,fastboot and xperia t /tx from flashtool folder. however problem still exists. does anyone have solution for it.
thanks in advance
oh damn, not a single word about your running OS
let me guess? win8, 8.1? if you have linux/ubuntu based available, i would suggest you to use flashtool,fastboot,adb on linux. if you only have win8/8.1. then you should search our xperia T forums, there are several posts about problems. there are problems with driver certification or other stuff like that since win8. if i remember right somehow i got all working on win8, but since i have win8.1, i switched to linux for android stuff^^
if i find the way i got it working on win8, then i edit my post.
best for the average pc user would be to use win7. my opinion.
Oh sorry i forgot about OS. So im running on Win XP SP 3.
misiex2212 said:
Oh sorry i forgot about OS. So im running on Win XP SP 3.
Click to expand...
Click to collapse
Try a older version of Flash Tool,see if that helps. Also close any running processes you don't need before you install Flash Tool.
can someone provide link for older ver of flashtool. and about processes running in background i have only those needed by windows
Logs from flashtool. i get same error everytime im trying to flash it
16/027/2014 14:27:28 - INFO - <- This level is successfully initialized
16/027/2014 14:27:28 - INFO - Flashtool Version 0.9.14.0 built on 12-02-2014 22:45:00
16/027/2014 14:27:36 - INFO - Device disconnected
16/027/2014 14:27:40 - INFO - Selected Bundle for Xperia T (LT30P). FW release : 9.2.A.0.295. Customization : Vodafone UK
16/027/2014 14:27:40 - INFO - Preparing files for flashing
16/029/2014 14:29:17 - INFO - Please connect your device into flashmode.
16/029/2014 14:29:25 - INFO - Opening device for R/W
16/029/2014 14:29:26 - INFO - Start Flashing
16/029/2014 14:29:26 - INFO - Processing loader.sin
16/029/2014 14:29:26 - INFO - Checking header
16/029/2014 14:29:26 - INFO - Ending flash session
16/029/2014 14:29:26 - ERROR -
16/029/2014 14:29:26 - ERROR - Error flashing. Aborted
16/029/2014 14:29:26 - ERROR - Drivers need to be installed for connected device.
16/029/2014 14:29:26 - ERROR - You can find them in the drivers folder of Flashtool.
Install the Flashmode, Fastboot and TX drivers from the flashtool/drivers directory
Mad Marty said:
Install the Flashmode, Fastboot and TX drivers from the flashtool/drivers directory
Click to expand...
Click to collapse
i have installed them already. ive tried with several usb cables and nothing.
I've had some issues with the .14 version of Flashtool that you seem to be using
I wasn't able to flash anything.
Worked like a charm though when using my brothers laptop, that is running an older version of Flashtool
So maybe using you should try an older version of it
problem solved.
ive used flashtool 0.9.9.0 however problem seems to be with busybox as ive installed it again and now is flashing without problems