Database Develop

[HELP] Flashmode Freeze My PC

Hi guys, my EN is poor, SORRY
when i connect my xperia tx to my pc through flashmood (voloume down then connect), the pc freeze and i should restart windows, drivers installed
but the problem not exists with my friend laptop with same flashmode & phone drivers instillation
plz help me friends, its make me so sad

1) No need to change the font in your posts
2) Download flashtool from the first thread in the development section
3) Install it
4) Goto the installation directory (C:\flashtool) and open the driver folder
5) Run driver.exe
6) Tick boxes for flashmode, fastboot and TX
7) Try again.
8) Report back here if it works or not.
9) If not, then run flashtool and attach the phone in flashmode to the PC. Report back the log from flashtool

gregbradley said:
1) No need to change the font in your posts
2) Download flashtool from the first thread in the development section
3) Install it
4) Goto the installation directory (C:\flashtool) and open the driver folder
5) Run driver.exe
6) Tick boxes for flashmode, fastboot and TX
7) Try again.
8) Report back here if it works or not.
9) If not, then run flashtool and attach the phone in flashmode to the PC. Report back the log from flashtool
Click to expand...
Click to collapse
i do all steps before, but problem not solved (just on my pc no on my friend laptop)
the problem is just when i try go to flashmode (first post edited)
i searched on google and i see many ppls have same problem and cant find any solution's
this is the log:
Code:
19/059/2013 11:59:05 - INFO - <- This level is successfully initialized
19/059/2013 11:59:06 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
19/059/2013 11:59:06 - INFO - You can drag and drop ftf files here to start flashing them
19/059/2013 11:59:19 - INFO - Device disconnected
19/059/2013 11:59:52 - INFO - Device connected with USB debugging on
19/059/2013 11:59:52 - INFO - Connected device : LT30
19/059/2013 11:59:52 - INFO - Installed version of busybox : BusyBox v1.20.0 (2012-08-22 21:36:24 CDT) multi-call binary.
19/059/2013 11:59:52 - INFO - Android version : 4.1.2 / kernel version : 3.4.0-17382J-g2f4f874-00856-gaa0cc9c / Build number : 9.1.B.0.411
19/059/2013 11:59:54 - INFO - Root Access Allowed

Uninstall all android software. (Flashtool, pccompanion etc) and reboot and reinstall it.
Then try again.
Have you tried flashing something in flashmode yet?

I do all that u say
yes i flashed former tx jb with flash tool by my friend laptop

smfazel said:
I do all that u say
yes i flashed former tx jb with flash tool by my friend laptop
Click to expand...
Click to collapse
can you try it on your machine please and then post the output from flashtool...
I need to know what your machine is doing. It very much seems like a problem with your computer

gregbradley said:
can you try it on your machine please and then post the output from flashtool...
I need to know what your machine is doing. It very much seems like a problem with your computer
Click to expand...
Click to collapse
Are u aware??? !!!!!!!!
I say my pc freeze and can't get flashmode
Now I'm tryin inistall win 7 with xp
Sent from my LT29i using Tapatalk 2

Yes I am aware, but thanks for not telling me the information I wanted.
I will now just guess what flashtool says when your pc freezes....
Sent whilst sat on the toilet.

gregbradley said:
Yes I am aware, but thanks for not telling me the information I wanted.
I will now just guess what flashtool says when your pc freezes....
Sent whilst sat on the toilet.
Click to expand...
Click to collapse
Ha ha ha
Bro, when pc hangs or freezes, the pc & flashtool (& me) can't say anything's, just shold restart pc manually
Problem solved with win7
Sent from my LT29i using Tapatalk 2

[q] error flashing!!!! 12.0.a.2.254

My PC keep showing error messages when im flashing my xperia sp .
it said that : ERROR -
- ERROR - Error flashing. Aborted
-ERROR - Drivers need to be installed for connected device.
-ERROR - You can find them in the drivers folder of Flashtool.
-INFO - Device disconnected
-INFO - Device connected with USB debugging off
I already used the adb installer software and it said that the driver had been installed.
The USB debugging is on .
Help meee! Im running Windows 8 . :crying::crying::crying::crying::crying:

In windows 8 theres a diffrent method to install unsigned drivers
http://forum.xda-developers.com/showthread.php?t=2303046
Hope this helps
Install the drivers using this method

Win 8 is the problem.
Try this thread http://forum.xda-developers.com/showthread.php?t=2544270
Sent from my C5303 using xda premium

flashtool problem xperia t

hello
Few minutes ago ive been trying to install new FW for xperia t suddenly flashtool says that i dont have drivers for my phone. So ive installed drivers for flashmode,fastboot and xperia t /tx from flashtool folder. however problem still exists. does anyone have solution for it.
thanks in advance

oh damn, not a single word about your running OS
let me guess? win8, 8.1? if you have linux/ubuntu based available, i would suggest you to use flashtool,fastboot,adb on linux. if you only have win8/8.1. then you should search our xperia T forums, there are several posts about problems. there are problems with driver certification or other stuff like that since win8. if i remember right somehow i got all working on win8, but since i have win8.1, i switched to linux for android stuff^^
if i find the way i got it working on win8, then i edit my post.
best for the average pc user would be to use win7. my opinion.

Oh sorry i forgot about OS. So im running on Win XP SP 3.

misiex2212 said:
Oh sorry i forgot about OS. So im running on Win XP SP 3.
Click to expand...
Click to collapse
Try a older version of Flash Tool,see if that helps. Also close any running processes you don't need before you install Flash Tool.

can someone provide link for older ver of flashtool. and about processes running in background i have only those needed by windows

Logs from flashtool. i get same error everytime im trying to flash it
16/027/2014 14:27:28 - INFO - <- This level is successfully initialized
16/027/2014 14:27:28 - INFO - Flashtool Version 0.9.14.0 built on 12-02-2014 22:45:00
16/027/2014 14:27:36 - INFO - Device disconnected
16/027/2014 14:27:40 - INFO - Selected Bundle for Xperia T (LT30P). FW release : 9.2.A.0.295. Customization : Vodafone UK
16/027/2014 14:27:40 - INFO - Preparing files for flashing
16/029/2014 14:29:17 - INFO - Please connect your device into flashmode.
16/029/2014 14:29:25 - INFO - Opening device for R/W
16/029/2014 14:29:26 - INFO - Start Flashing
16/029/2014 14:29:26 - INFO - Processing loader.sin
16/029/2014 14:29:26 - INFO - Checking header
16/029/2014 14:29:26 - INFO - Ending flash session
16/029/2014 14:29:26 - ERROR -
16/029/2014 14:29:26 - ERROR - Error flashing. Aborted
16/029/2014 14:29:26 - ERROR - Drivers need to be installed for connected device.
16/029/2014 14:29:26 - ERROR - You can find them in the drivers folder of Flashtool.

Install the Flashmode, Fastboot and TX drivers from the flashtool/drivers directory

Mad Marty said:
Install the Flashmode, Fastboot and TX drivers from the flashtool/drivers directory
Click to expand...
Click to collapse
i have installed them already. ive tried with several usb cables and nothing.

I've had some issues with the .14 version of Flashtool that you seem to be using
I wasn't able to flash anything.
Worked like a charm though when using my brothers laptop, that is running an older version of Flashtool
So maybe using you should try an older version of it

problem solved.
ive used flashtool 0.9.9.0 however problem seems to be with busybox as ive installed it again and now is flashing without problems

Trying to flash a stock rom, but having an issue with flashmode.

The instant I enter flashmode the flash fails. Here is my log:
Code:
29/032/2014 09:32:24 - INFO - <- This level is successfully initialized
29/032/2014 09:32:24 - INFO - Flashtool Version 0.9.14.0 built on 12-02-2014 22:45:00
29/032/2014 09:32:28 - INFO - Device connected with USB debugging on
29/032/2014 09:32:29 - INFO - Connected device : Sony Xperia T
29/032/2014 09:32:29 - INFO - Installed version of busybox : BusyBox v1.20.2-Stericson (2012-07-04 21:33:31 CDT) multi-call binary.
29/032/2014 09:32:29 - INFO - Android version : 4.1.2 / kernel version : 3.4.0-g5b052b2-00814-g976ab37 / Build number : 9.1.A.1.141
29/032/2014 09:32:29 - INFO - Checking root access
29/032/2014 09:32:30 - INFO - Root Access Allowed
29/033/2014 09:33:49 - INFO - Selected Bundle for LT30p. FW release : 9.2.A.1.199. Customization : Generic UK
29/033/2014 09:33:49 - INFO - Preparing files for flashing
29/033/2014 09:33:54 - INFO - Please connect your device into flashmode.
29/034/2014 09:34:03 - INFO - Device disconnected
29/035/2014 09:35:04 - INFO - Device connected in flash mode
29/035/2014 09:35:04 - INFO - Opening device for R/W
29/035/2014 09:35:04 - INFO - Start Flashing
29/035/2014 09:35:04 - INFO - Processing loader.sin
29/035/2014 09:35:04 - INFO - Checking header
29/035/2014 09:35:04 - INFO - Ending flash session
29/035/2014 09:35:04 - ERROR -
29/035/2014 09:35:04 - ERROR - Error flashing. Aborted
29/035/2014 09:35:04 - INFO - Device connected in flash mode
29/035/2014 09:35:15 - INFO - Device disconnected
Any ideas what could be wrong or what I can do?
Thanks
Edit: I tried uninstalling the phone from Device Manager, but that had no effect. When the flash fails I see a popup in the corner saying this device malfunctioned/is not recognized.

Astralogic said:
The instant I enter flashmode the flash fails. Here is my log:
Code:
29/032/2014 09:32:24 - INFO - <- This level is successfully initialized
29/032/2014 09:32:24 - INFO - Flashtool Version 0.9.14.0 built on 12-02-2014 22:45:00
29/032/2014 09:32:28 - INFO - Device connected with USB debugging on
29/032/2014 09:32:29 - INFO - Connected device : Sony Xperia T
29/032/2014 09:32:29 - INFO - Installed version of busybox : BusyBox v1.20.2-Stericson (2012-07-04 21:33:31 CDT) multi-call binary.
29/032/2014 09:32:29 - INFO - Android version : 4.1.2 / kernel version : 3.4.0-g5b052b2-00814-g976ab37 / Build number : 9.1.A.1.141
29/032/2014 09:32:29 - INFO - Checking root access
29/032/2014 09:32:30 - INFO - Root Access Allowed
29/033/2014 09:33:49 - INFO - Selected Bundle for LT30p. FW release : 9.2.A.1.199. Customization : Generic UK
29/033/2014 09:33:49 - INFO - Preparing files for flashing
29/033/2014 09:33:54 - INFO - Please connect your device into flashmode.
29/034/2014 09:34:03 - INFO - Device disconnected
29/035/2014 09:35:04 - INFO - Device connected in flash mode
29/035/2014 09:35:04 - INFO - Opening device for R/W
29/035/2014 09:35:04 - INFO - Start Flashing
29/035/2014 09:35:04 - INFO - Processing loader.sin
29/035/2014 09:35:04 - INFO - Checking header
29/035/2014 09:35:04 - INFO - Ending flash session
29/035/2014 09:35:04 - ERROR -
29/035/2014 09:35:04 - ERROR - Error flashing. Aborted
29/035/2014 09:35:04 - INFO - Device connected in flash mode
29/035/2014 09:35:15 - INFO - Device disconnected
Any ideas what could be wrong or what I can do?
Thanks
Edit: I tried uninstalling the phone from Device Manager, but that had no effect. When the flash fails I see a popup in the corner saying this device malfunctioned/is not recognized.
Click to expand...
Click to collapse
1.- Are you sure you have the right FTF for your phone model?
2.- Are you sure the FTF file isn't corrupted? (download again)
3.- Are you sure the proper drivers are installed (install them from the "drivers" folder in the Flashtool folder).
4.- Are you sure your USB cable isn't damaged and is disconnecting while flashing (try a different cable).
I think I've read that excluding the TA partition and/or BASEBAND might help. Don't take my word for it, Google it first.

Antiga Prime said:
1.- Are you sure you have the right FTF for your phone model?
2.- Are you sure the FTF file isn't corrupted? (download again)
3.- Are you sure the proper drivers are installed (install them from the "drivers" folder in the Flashtool folder).
4.- Are you sure your USB cable isn't damaged and is disconnecting while flashing (try a different cable).
I think I've read that excluding the TA partition and/or BASEBAND might help. Don't take my word for it, Google it first.
Click to expand...
Click to collapse
1 - I have an Xperia T and this is the FTF I 'm trying to flash.
2 - Yes, I have re-downloaded from a mirror.
3 - That installer doesn't include drivers in it's list for Xperia T, the Xperia TX drivers failed to install, I tried them to see if they would work.
Edit: In flashtool, exclude baseband is clearly labelled, but exclude TA partition is not. I can exclude "partition", is that it? Or could it be the "FOTA" option?
4 - The cable isn't causing the problem. Tried another.
I have no idea how excluding the TA partition and/or the baseband. I'll read up about it and see if it helps.
I even used the full unroot option in SuperSU, just so I could try to update the official way but it still didn't work.

Astralogic said:
3 - That installer doesn't include drivers in it's list for Xperia T, the Xperia TX drivers failed to install, I tried them to see if they would work.
Edit: In flashtool, exclude baseband is clearly labelled, but exclude TA partition is not. I can exclude "partition", is that it? Or could it be the "FOTA" option?
4 - The cable isn't causing the problem. Tried another.
Click to expand...
Click to collapse
No, if you don't see the exclude TA, then the FTF doesn't have the "simlock.ta" file in it.
You should use the TX drivers. If you haven't installed drivers at all, then that is clearly an issue. You could try with this driver pack, but the drivers that come with Flashtool should work.
What error do you get when installing the drivers?

Antiga Prime said:
No, if you don't see the exclude TA, then the FTF doesn't have the "simlock.ta" file in it.
You should use the TX drivers. If you haven't installed drivers at all, then that is clearly an issue. You could try with this driver pack, but the drivers that come with Flashtool should work.
What error do you get when installing the drivers?
Click to expand...
Click to collapse
Here's a screenshot of the error.
But when I attempt to install the drivers you linked to above, the top driver (Sony(WinUSB), above Sony Net) in the Device Driver Installation Wizard window has a green tick next to it. The bottom one, Sony Net, still has a red X next to it.

Astralogic said:
Here's a screenshot of the error.
But when I attempt to install the drivers you linked to above, the top driver (Sony(WinUSB), above Sony Net) in the Device Driver Installation Wizard window has a green tick next to it. The bottom one, Sony Net, still has a red X next to it.
Click to expand...
Click to collapse
Correct me if I'm wrong, but it seems like you're using Windows 8. You need to disable driver signature enforcement, either by doing this, or Googling another method (there are several).
Notice that drivers have been extracted to the temp folder (check your screenshot); I'd copy that driver folder to somewhere else, just to have it on hand, and that way it's easier to install the drivers manually through the Windows Device Manager, something you'd need to do after disabling the driver signing, and something I'd do anyways regardless if you're on Windows 8 or not; if drivers don't come with a specific software (such as Nvidia or ATI drivers) then it's always possible and in some cases easier to just add the driver manually through the Device Manager.

Antiga Prime said:
Correct me if I'm wrong, but it seems like you're using Windows 8. You need to disable driver signature enforcement, either by doing this, or Googling another method (there are several).
Notice that drivers have been extracted to the temp folder (check your screenshot); I'd copy that driver folder to somewhere else, just to have it on hand, and that way it's easier to install the drivers manually through the Windows Device Manager, something you'd need to do after disabling the driver signing, and something I'd do anyways regardless if you're on Windows 8 or not; if drivers don't come with a specific software (such as Nvidia or ATI drivers) then it's always possible and in some cases easier to just add the driver manually through the Device Manager.
Click to expand...
Click to collapse
I got the drivers installed succesfully by disabling driver signature verification and running the installer, but I still get the same error in flashtool. I really thought that was going to fix it.

Astralogic said:
I got the drivers installed succesfully by disabling driver signature verification and running the installer, but I still get the same error in flashtool. I really thought that was going to fix it.
Click to expand...
Click to collapse
Open the Device Manager and check if you have any devices with a yellow exclamation mark/warning. Aside from that, try a computer with Windows 7, maybe?
If not, and considering that you get a "this device has malfunctioned" error in Windows, and it's not your USB cable, then your USB port on either your phone or computer might not be working properly.

Antiga Prime said:
Open the Device Manager and check if you have any devices with a yellow exclamation mark/warning. Aside from that, try a computer with Windows 7, maybe?
If not, and considering that you get a "this device has malfunctioned" error in Windows, and it's not your USB cable, then your USB port on either your phone or computer might not be working properly.
Click to expand...
Click to collapse
The bad news is it didn't work
The good news is I got more info this time
Take a look at this screenshot, it's definitely some time of driver issue, something called S1boot fails to install: Screenshot.
That is AFTER the successful installation of the TX drivers in the drivers folder, these errors occur the instant my phone enters flashmode.
Edit: Forgot to mention this was on another PC, running Windows 7.
Edit 2: Just to clarify, the instant my phone entered flashmode, the computer tried to install those drivers.
Edit 3: I found this, I'm about to try it. Fingers crossed.
Edit 4: Those drivers didn't work. In Windows 8, I right click the INF and it installs, but no success on the flash. In Windows 7 I get a message that this INF does not support this method of installation. There are no devices with a yellow exclamation in device manager on either computer ;(

OK I managed to update the firmware using Sony Update Server program, now I constantly get the message android.process.media has stopped working. I tried to use an app called Rescan Media Root to disable the media scanner but it didn't work. The message is relentless, the phone is unusable because of this damn message
Maybe it's occurring because I disabled some system app or something?

Astralogic said:
OK I managed to update the firmware using Sony Update Server program, now I constantly get the message android.process.media has stopped working. I tried to use an app called Rescan Media Root to disable the media scanner but it didn't work. The message is relentless, the phone is unusable because of this damn message
Maybe it's occurring because I disabled some system app or something?
Click to expand...
Click to collapse
Most likely you didn't wipe data, A.K.A. Factory Reset.

Antiga Prime said:
Most likely you didn't wipe data, A.K.A. Factory Reset.
Click to expand...
Click to collapse
You're right. But I fixed it by clearing the data for Download Manager and Media Manager (or something like that).

flashtool doesn't recognise phone is connected

hello, i want to use the flashtool but it keep asking to plug in the phone. i turned it off, and press volume down while connecting already.

avila188 said:
hello, i want to use the flashtool but it keep asking to plug in the phone. i turned it off, and press volume down while connecting already.
Click to expand...
Click to collapse
Sounds like you may need to install the flashtool-specific drivers. In your flashtool directory, there should be a "drivers" folder where you can install the flashtool (and fastboot)-specific drivers. I don't know if you need to have the latest version of flashtool (since this phone is still kind of new) to get a more appropriate driver set.
Also if you are installing these drivers in Windows 8 & up, you will likely have to install them while Driver Signature Enforcement (or whatever its called) is disabled. That method can be found easily via google search.

ok i installed the driver from the drivers folder. plugged the phone, recoqnised, but write up the following error:
20/030/2015 07:30:31 - ERROR - Processing of loader.sin finished with errors.
20/030/2015 07:30:31 - INFO - Ending flash session
20/030/2015 07:30:31 - ERROR -
20/030/2015 07:30:31 - ERROR - Error flashing. Aborted
20/030/2015 07:30:31 - INFO - Device connected in flash mode

avila188 said:
ok i installed the driver from the drivers folder. plugged the phone, recoqnised, but write up the following error:
20/030/2015 07:30:31 - ERROR - Processing of loader.sin finished with errors.
20/030/2015 07:30:31 - INFO - Ending flash session
20/030/2015 07:30:31 - ERROR -
20/030/2015 07:30:31 - ERROR - Error flashing. Aborted
20/030/2015 07:30:31 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
ok i installed all drivers, and it works.
now i flashed already and got the latest build, and my telstra apps are all gone! woohoo! i suppose now my phone is like unlocked and sony version ( no carrier)?
thanks to the uploader at
[FTF] STOCK FIRMWARES for D5803 & D5833
one thing tho, when i want to delete app shortcut, the x location is now at the top, not at the bottom on the apps shortcut. is this what you all have?