[Q] USB not functioning - intermittent ADB - One (M7) Q&A, Help & Troubleshooting

Hi guys, hoping someone can help ?
As you see from the title, my HTC One fails to connect to the computer, Here's what ive done to try and remedie the problem.
Removed and clean installed latest HTC Sync and drivers
removed SDK and ADB, updated
rebooted phone
switched on and off
tried several roms
tried 3 different usb cables
tried 5 different usb ports
tried 2 different PC's
My phone sounds like it tries to connect to the pc - with the typical windows noise, then disconnects almost immediaetly, then reconnects then just keeps doing that, my pc comes up with installing drivers, then fails to instal drivers, saying phone not connected, once ive tried this once the phone need to be rebooted before it will attemp to connect to the pc again ---- but fails again
software wise the phone runs perfectly , other than the usb connection problem and charge problem with pc.
The phone charges first time, every time with all my usb cables and htc chargers
im trying to downgrade or reflash hboot 1.55000, just incase this has somehow went corrupt on the usb commands side, but without adb ect it seems almost impossible,
have any of you guys experienced anything like this or could offer solid ideas on how to re-flash hboot from the file located on my phone ???
all help appreciated
running ardh 13.4/22.0, hboot 1.55, cid = supercid, unlocked, s-off
I would simply go back to stock and return via shop in uk - to see if i could get a replacement, but getting there seems impossible - if i can simply get the pc usb problem sorted - all will be fine

dayze0 said:
Hi guys, hoping someone can help ?
As you see from the title, my HTC One fails to connect to the computer, Here's what ive done to try and remedie the problem.
Removed and clean installed latest HTC Sync and drivers
removed SDK and ADB, updated
rebooted phone
switched on and off
tried several roms
tried 3 different usb cables
tried 5 different usb ports
tried 2 different PC's
My phone sounds like it tries to connect to the pc - with the typical windows noise, then disconnects almost immediaetly, then reconnects then just keeps doing that, my pc comes up with installing drivers, then fails to instal drivers, saying phone not connected, once ive tried this once the phone need to be rebooted before it will attemp to connect to the pc again ---- but fails again
software wise the phone runs perfectly , other than the usb connection problem and charge problem with pc.
The phone charges first time, every time with all my usb cables and htc chargers
im trying to downgrade or reflash hboot 1.55000, just incase this has somehow went corrupt on the usb commands side, but without adb ect it seems almost impossible,
have any of you guys experienced anything like this or could offer solid ideas on how to re-flash hboot from the file located on my phone ???
all help appreciated
running ardh 13.4/22.0, hboot 1.55, cid = supercid, unlocked, s-off
I would simply go back to stock and return via shop in uk - to see if i could get a replacement, but getting there seems impossible - if i can simply get the pc usb problem sorted - all will be fine
Click to expand...
Click to collapse
Are the chargers working fine? or are they giving you intermittent charge/no-charge cycles as well? in which case it could be your USB socket is damaged or dirty, try cleaning it with a compressed air tank (or whatever it's called )
Are you also facing the problem in bootloader mode (ie fastboot)?

hmm, will give the usb socket on my phone a clean. Im charging completley fine with chargers and usb cables from mains, when i install htc sync(latest) it installs no problems, then i plug phone into pc, the usb connected appears on phone and then disappears almost imediaetly, the pc sees ive plugged something in and straight away tries to instal drivers - but then comes up with drivers were no installed correctly, also then the phone fails to charge from pc, if i reboot phone - and plug in it will run through the same install cycle again , as described above., basically all drivers fail to install when i plug phone in, its like the phone connects then instantly disconnects.
I ll clean port and post back, could make a difference if a pin has a high resistance contact , thx for info will give it a go

Related

Replacement I897UCKB2 build is not seen by Windows 7

I have two windows 7 pcs that both recognized my replacement I897UCKB2 phone that I got a little over a week ago. I installed Kies on one of them to upgrade my wife's Cappy to UCKB1. I connected my phone and saw an error that it wasn't recognized. I have uninstalled KIES, the drivers, rebooted, cleaned out Samsung registry entries, rebooted (many times), tried different ports (including on the back), etc - no dice. I tried the other pc which hasn't had any changes and that doesn't recognize it either.
I know the cable is good because my wife's UCKB2 (was replaced as well) is seen no problem using the same cable and computer.
I have tried with my phone in debug and not - mass storage, KIES, ask on connection - etc. I did previously root the phone with SuperOneClick on this build. I was about to flash a custom ROM tonight after waiting a bit but now I can't get any computer to see it although the phone does start charging. I haven't yet tried linux and heimdall but that is about the only thing I can think of at this point.
I started wondering if Kies somehow caused a problem on the phone - maybe because it was rooted? I tried restoring CWM since I have Titanium backup working and busybox, etc. In CWM I tried "reboot into recovery" and then I see the original 3e recovery. I tried "reinstall packages" and it fails the signature verification. I have flashed ROMs many times in the past and have never been "stuck" like this... Any ideas?
I would try flashing the original stock eclair, there is an odin one click around that will do it... "I897UCJF6-final-OCD-REV0.exe". Then try kies mini.
crt60 said:
I would try flashing the original stock eclair, there is an odin one click around that will do it... "I897UCJF6-final-OCD-REV0.exe". Then try kies mini.
Click to expand...
Click to collapse
Thanks but that is the ODIN I have always used in the past. It doesn't even see the phone when I connect it though. The phone will start charging but windows doesn't recognize that I connected it.
RichMD said:
Thanks but that is the ODIN I have always used in the past. It doesn't even see the phone when I connect it though. The phone will start charging but windows doesn't recognize that I connected it.
Click to expand...
Click to collapse
I had a friend who had that problem. When he plugged his phone into his computer, the phone would start charging but Windows wouldn't even play a notification sound to show the phone was plugged in. He couldn't access USB storage mode or anything. He called Samsung and was told his phone would need to be reflashed. His three button combo didn't work, so we bought a jig on eBay. We could get the phone into download mode that way...but Windows still/I] wouldn't recognize it. He called Samsung again and they replaced it under warranty, without any hassle.
Well, are you sure that you have your usb drivers installed correctly? Have you tried seeing if adb is recognizing the phone? Also, make sure that it is plugged in on all sides on the phone end of the the USB (sometimes the phone charges when it is plugged but unless you plug it in all the way, the computer won't recognize it)
try those...
pwneman said:
Well, are you sure that you have your usb drivers installed correctly? Have you tried seeing if adb is recognizing the phone? Also, make sure that it is plugged in on all sides on the phone end of the the USB (sometimes the phone charges when it is plugged but unless you plug it in all the way, the computer won't recognize it)
try those...
Click to expand...
Click to collapse
Thanks for the replies. I know the USB drivers are good because I can easily mount USB storage on my wife's captivate - same exact I897UCKB2 build with the same cable. Additionally, a second pc won't see my phone even though it did before. I have tried at least 6 different ports numerous times. I am thinking I need a replacement.
My question now is that it is rooted with busybox, etc and I can't use an unroot program from a PC. Will a factory reset under settings (not CWM) erase all traces of root?
Sent from my SAMSUNG-SGH-I897 using Tapatalk

[Q] Not able to connect to PC using USB cable

Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
musicking said:
Hi all,
Please help me.
when i connect my LG P970 using USB cable to laptop, its not detecting.
I installed drivers many times. I restarted pc, phone many times, even i formatted(reset my phone to factory settings).
Noting is working.
I wanna root my mobile, but without connecting to pc via USB its not possible. ( itried Ginger break also, not working).
Thanks in advance.
Click to expand...
Click to collapse
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
xonar_ said:
Make sure the cable is properly connected. Check for dust that might prevent it going in properly. Try a different cable. What OS are you using? I found where bootloader is dmg or incomplete Windows fails to detect it. Linux on the other hand detects it. Can't use it but you can detect it.
Can you connect to SW Update Mode? Battery out and plug into PC while holding vol up button.
If nothing works try taking it into the shop.
Sent From Optimus Black
Click to expand...
Click to collapse
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
musicking said:
I connected it properly. Tried with different cable too.
Windows 7
I can connect to SW Update mode
Click to expand...
Click to collapse
You can root your phone from there. If you have SW Update. I recommend taking it into the shop if you are still under warranty, If you don't have warranty then you can go ahead and root. Just install a patched bin and fls with Smart Flash Tool. It's one of the stickies (How to unbrick, I think)
hi
new to Android nation
I have the same issue when connecting to USB...
And I managed to flash with custom firmware (latest ZEUS version) and I rooted but the issue with USB connection is still there...
Anyway, I wiil try connecting it to Linux to check if that would work with USB connecting
UPDATE:
OK after some digging, I managed to (at least temporally) solve the issue... After fresh installing official 2.3.4 firmware I booted to recovery and from there formatted the system folder and then installed Zeus v7 firmware... anyway, USB connection and charging indicator work fine at first booting to system... As soon as I reboot the OS USB connection (and charging) get unstable, and after third reboot it completely goes away and the device does not recognize anything: if I connect USB cable it does not show any sing (charging indicator does not show battery charging, nor the device offers me to connect in mass storage, windows recognizes only modem but not the USB storage) and when I connect charger, battery indicator does not flash as charging... Battery monitor tool shows that "battery is discharging" even though the battery capacity seems to increase (according to growing percentage of battery capacity)... Is there a some kind of USB server... I am a total noob to Androiid OS (used to be Symibian from its beggining )so I hope you won`t mind if I used wrong terms in my explanation/comment...
I hope my explanation is not confusing
Cheers
UPDATE 2:
After installing Zeus v7.01 update, battery charging recognition got fixed using both USB cable and wall charger...
Anyway, USB recognition by PC problem still exists... But when in recovery mode I can successfully mount SD card to PC in Mass storage mode...
Will keep you updated... :victory:

How to make phone into varanty-able state (lock bootloader, remove Tampered) w/o PC

Hey guys,
recently i found myself in a sticky situaiton, my USB connection to PC stopped working. Stometimes charging doesn't work until I reboot the phone, random car mode etc...
I tried everything, from reseting my ports on PC, reinstaling drivers, wiping phone cashe, factory reset and so on. PC just says "USB device is not recognized" .
So I wonder how to make the phone varanty possible without USB connection. Maybe trough terminal emulator?. I had TWRP recovery installed and I flashed stock recovery image directly from it, but it's still tampered and I have to get rid of it before taking it to store for varanty.
Any seggestions? I'm pretty desperate, pretty sure it's usb port on the phone or motherboard.
InFam0 said:
Hey guys,
recently i found myself in a sticky situaiton, my USB connection to PC stopped working. Stometimes charging doesn't work until I reboot the phone, random car mode etc...
I tried everything, from reseting my ports on PC, reinstaling drivers, wiping phone cashe, factory reset and so on. PC just says "USB device is not recognized" .
So I wonder how to make the phone varanty possible without USB connection. Maybe trough terminal emulator?. I had TWRP recovery installed and I flashed stock recovery image directly from it, but it's still tampered and I have to get rid of it before taking it to store for varanty.
Any seggestions? I'm pretty desperate, pretty sure it's usb port on the phone or motherboard.
Click to expand...
Click to collapse
you cannot remove tempered from bootloader and it will show relocked. Its there for a reason, so HTC can see if you been tampering with the phone.
Yes it does void the #warranty.
That said, I send my phone to HTC to replace charging port and they did not charge me .. Have the phone for over 3 years and its rooted.
Tak to HTC but bear in mind Depending the country there's a 50% chance they will charge you.

Unable to connect Nexus 6 to computer for file transfer - Unknown USB Device

I recently tried to install PureNexus 7.1.2 along with the latest version of GApps 20170610. There seems to be some sort of conflict with that version of Google Play Services that prevents my device from completing setup. Without completing setup, I'm not able to do anything with the phone.
In an attempt to save myself, I want to go back to the older version of the ROM and GApps that worked, but first they need downloaded. In the past, I could go into TWRP and mount my device to my PC and transfer the files I needed to install. Now, Windows is showing my device as Unknown USB Device (Device Descriptor Request Failed). Going through every thread I could find about updating drivers, etc, it still does not work. This used to work just fine in the past on the same PC (Windows 10).
Both adb and fastboot don't seem to work either. There is no device found. When I boot the phone into Bootloader mode and plug in the USB cable, it shows Transfer Mode: USB Connected but running fastboot on the PC still can't find anything.
I am not sure how else to go about getting the necessary files on the device to flash them.
For what it is worth, I was able to get the ROM booted enough to connect to my Mac via Bluetooth and am able to transfer a file that will hopefully work. It still doesn't explain why USB can't connect. I have tried it against (2) Windows 10 PCs and my Mac with 4 different USB cables, one of which I went out a purchased today because of the issue. I am beginning to think something internally has failed on the device.
tristanlee85 said:
For what it is worth, I was able to get the ROM booted enough to connect to my Mac via Bluetooth and am able to transfer a file that will hopefully work. It still doesn't explain why USB can't connect. I have tried it against (2) Windows 10 PCs and my Mac with 4 different USB cables, one of which I went out a purchased today because of the issue. I am beginning to think something internally has failed on the device.
Click to expand...
Click to collapse
It could be just a dirty usb port.
Where's answers
ktmom said:
It could be just a dirty usb port.
Click to expand...
Click to collapse
Unfortunately I do not think that is the case. I have used a number of different means to clean the connection with rubbing alcohol and electrical terminal cleaner, small utensils to get in there and clean the contacts, but no luck. I am to the point now where the phone won't boot up the OS. I can get into TWRP and the Bootloader, but from there I have no way to transfer files to the device.
Bluetooth was my option before, but that is when the device would boot. There's no way to enable BT from recovery right? I am trying to reset the phone back to stock to trade it in to Google, but I am afraid I am going to be out $100 since it seems to be as good as dead now.

USB connection dialogue not showing up, unable to connect

I have a very weird issue with my S10: it wont connect via usb to pc. Once connected a notification should display and the option "file transfer" should be there, but no such menu appears. When i plug it in to a pc it just starts charging, the pc also does not see a (bad) usb connection or whatever. I have been reading fora and watching youtube for over 1,5 hours. I feel now is the time to ask for help.
What might be usefull context: i have had the "moisture detected" error many times, it started showing up 2 weeks after i bought the device. Gladly i mainly use wireless charging so effectively it hasnt bothered me much, but it was weird since even after waiting for hours for the phone to dry (i dont think it was wet but whatever) the error was still there. One week ago the problem got quite severe, lasted for more than 24 hours and it just refused to charge, tried rebooting, turning it off, going into safe mode... to no avail. I had no wireless charger then, it was nasty.
I am using the usb cable provided by samsung (but used two others as well).
What i tried:
wiping cache and data from usb settings
wiping cache via recovery
reinstalling samsung drivers to pc
looking for a yellow exclamation mark in device manager on pc (not there)
different usb cables
different pc's
different ports on pc
rebooting the phone
booting in safe mode
installed dex on pc
via developper mode select file transfer as standard
via developper mode select any of the other modes to see if that helps
via developper mode revoked usb debugging authorizations
via developper mode enable usb debugging
The next logical step seems a factory reset. I am unwilling to do that however, since there are many gigs of photo's on the device that i want to backup first (the whole point of trying to connect it via usb heheh).
Your advice please!
Your could try to reflash your present OS via Odin but when doing so remember to use HOME_CSC. This way your data will be present when done flashing and phone reboots.
Norup58 said:
Your could try to reflash your present OS via Odin but when doing so remember to use HOME_CSC. This way your data will be present when done flashing and phone reboots.
Click to expand...
Click to collapse
How he can do the flash with odin when phone is not recognized by the computer !
Clean the charging port with a clean toothbrush and try again ... Also make sure that the charging cable supports data transfer ... If you tried all of these things and did not work, then most likely the charging port has a problem that may be oxidized or cut in the tracks..Try the solution that I gave it to you, and if it doesn't work, take it to a technician
charge from the wall.
I too have a similar predicament. Tried all the cables and USB ports I could get my hands on... I have a custom ROM also, so it could be that. I have done a full format and reflashed ROM (from SD card) - but it made no difference, the phone refuses to communicate via USB.
SO, if you have any solutions, please let me know!
I can however communicate via ADB over network. So, if you know some adb commands you can pull over an entire folder with the "adb pull" command.

Categories

Resources