Related
Hi,
I had my phone replace the camera because of the purple-tint problem, HTC upgraded my phone to HBoot 1.54 and android 4.2.2 without informing me . Anyway.
After receiving my phone, I unlocked my phone again by the official method, then I wanted to make a clean backup of my rom, so I tried to boot my phone to third party recovery image by "fastboot boot some_CWM.img", my phone just hung there. I was frustrated, if I flash the CWM.img to the phone, would I brick my phone? Before the upgrade, my phone could be booted in the same CWM image file, can I use third party CWM after upgrade my HBoot to 1.54?
Any idea? please
Since you have HBOOT 1.54, you cannot boot into recovery using fastboot anymore, you have to flash the recovery and then backup the ROM.
You flash the recovery by "fastboot flash recovery recovery.img"
I also recommend TWRP, its so much easier to use and if you cant find it ill attach it here if you want!
EDIT: **** This will replace your stock recovery by CWM or TWRP ****
HTC One 1.54 bootloader, flash recovery.
Hey guys, new member, and thanks for the extensive information provided on the forum!
I have a related question to what the OP posted...possibly pertinent info about the phone itself:
I have an HTC One with 1.54 bootloader, it used to be a 4.1.2 with 1.44 bootloader AT&T device, which I rooted, S-OFF, CWM etc. I then realized I couldn't take OTA updates and was stuck either on 4.1.2 or a custom ROM, so I downloaded a 4.4 stock google edition RUU and installed it. Everything is good so far, but I cannot do a full backup anymore because it has the stock recovery.
My question is, can I just flash the CWM recovery, backup the phone, and flash back the stock recovery? My goal is to get best of both worlds, get OTA updates from google as well as do a full back-up of my phone.
Please advise, and thanks in advance for your input!
PS: Since the 4.4 RUU update, my phone still says "unlocked" and "S-OFF", if that matters at all.
Krish_1 said:
Hey guys, new member, and thanks for the extensive information provided on the forum!
I have a related question to what the OP posted...possibly pertinent info about the phone itself:
I have an HTC One with 1.54 bootloader, it used to be a 4.1.2 with 1.44 bootloader AT&T device, which I rooted, S-OFF, CWM etc. I then realized I couldn't take OTA updates and was stuck either on 4.1.2 or a custom ROM, so I downloaded a 4.4 stock google edition RUU and installed it. Everything is good so far, but I cannot do a full backup anymore because it has the stock recovery.
My question is, can I just flash the CWM recovery, backup the phone, and flash back the stock recovery? My goal is to get best of both worlds, get OTA updates from google as well as do a full back-up of my phone.
Please advise, and thanks in advance for your input!
PS: Since the 4.4 RUU update, my phone still says "unlocked" and "S-OFF", if that matters at all.
Click to expand...
Click to collapse
Sure you can but the stock recovery is only needed for OTA and they don't come that often.
and your phone has to be stock with stock recovery (no apps removed).
most people just ruu back to stock for the ota... not run custom recovery just long enough to backup.
Thanks for the quick response! I think what you're saying makes sense, though I don't have a stock AT&T RUU. I'm guessing I can download it with similar firmware so I can switch as needed. Thanks again!
Krish_1 said:
Thanks for the quick response! I think what you're saying makes sense, though I don't have a stock AT&T RUU. I'm guessing I can download it with similar firmware so I can switch as needed. Thanks again!
Click to expand...
Click to collapse
here's all the ruu's you should ever need
http://www.htc1guru.com/downloads
Awesome, thanks again!
I looked around the site before posting this, didn't find anything specific. I have a Nandroid backup of the stock phone before I started messing with it. If I do a recovery of that image using CWM, is it the same as downloading and flashing one of the stock RUUs? I'm guessing not, but would like to know for sure. Is the difference that RUUs have firmware, radio etc, while a Nandroid backup is of the OS and SD card?
Krish_1 said:
Awesome, thanks again!
I looked around the site before posting this, didn't find anything specific. I have a Nandroid backup of the stock phone before I started messing with it. If I do a recovery of that image using CWM, is it the same as downloading and flashing one of the stock RUUs? I'm guessing not, but would like to know for sure. Is the difference that RUUs have firmware, radio etc, while a Nandroid backup is of the OS and SD card?
Click to expand...
Click to collapse
well for one thing when you unlock the booloader it deletes some system files when it wipes the phone.. so your stock backup is already flawed (not true stock). and like i said to take OTA you must have a complete Stock phone. the only real Stock phone comes from RUU. I hope this clears it up for you. And no your sdcard is not backed up in the Nandroid
clsA said:
well for one thing when you unlock the booloader it deletes some system files when it wipes the phone.. so your stock backup is already flawed (not true stock). and like i said to take OTA you must have a complete Stock phone. the only real Stock phone comes from RUU. I hope this clears it up for you. And no your sdcard is not backed up in the Nandroid
Click to expand...
Click to collapse
Makes perfect sense, thanks again for the super quick responses!
Hi guys, sorry in advance for digging up an old thread!
I have an AT&T HTC One, installed the Google Edition 4.4.2 with this group's help, rooted etc.
I received an OTA update from google today (4.4.3), and while I tried installing it, it crashes with a "SET_METADATA_RECURSIVE" something failed etc. I tried it with both the recovery.img that I have from the Google Edition ROM as well as the CWM recovery.
I've searched for stuff in the forum and the only thing I found is that I may need the latest version of clockworkmod, but I think I already do...I have 6.0.4.3, which is the HTC One AT&T one. Also, since I installed the Google Edition ROM, I haven't removed or uninstalled any system apps..so my phone is pretty stock as far as Google is concerned.
Can someone point me in the right direction?
Thanks!
---------- Post added at 07:10 PM ---------- Previous post was at 06:17 PM ----------
I figured it out...I had to get the recovery.img from the 4.4.2 RUU, fastboot flash the bugger into my phone (CWK didn't work), and I was able to download and install the 4.4.3 with no issues. Pissed away a few hrs trying different things, hopefully this update is worth it!!!
Krish_1 said:
Hi guys, sorry in advance for digging up an old thread!
I have an AT&T HTC One, installed the Google Edition 4.4.2 with this group's help, rooted etc.
I received an OTA update from google today (4.4.3), and while I tried installing it, it crashes with a "SET_METADATA_RECURSIVE" something failed etc. I tried it with both the recovery.img that I have from the Google Edition ROM as well as the CWM recovery.
I've searched for stuff in the forum and the only thing I found is that I may need the latest version of clockworkmod, but I think I already do...I have 6.0.4.3, which is the HTC One AT&T one. Also, since I installed the Google Edition ROM, I haven't removed or uninstalled any system apps..so my phone is pretty stock as far as Google is concerned.
Can someone point me in the right direction?
Thanks!
Click to expand...
Click to collapse
Hello everyone,
This is my first post so I hope I don't end up being a "typical noob".
I'll try give the full info but keep it concise.
Background:
1) Carrier Unlocked HTC One M7 Originally on Rogers.
M7_UL PVT SHIP S-On RH
HBoot-1.44.000
Radio - 4A.14.3250.13
Open DSP 26.120.274.0202
emmc-boot
2) The phone was working perfectly after being hard reset, and configured without a sim.
3) After it was activated by the telco, the keyboard would would no longer work. Dialpad fine... menus fine... but no keyboard would pop up when selecting text fields. Did a full factory reset, and also tried clearing the Sense Touch data cache via Settings->App.
4) After trying various possible solutions I found online, I finally decided to try start from scratch by installing stock firmware.
WARNING: i'm the second owner of the phone. For warranty I would have had to send the phone to HTC. I suspect the HTC warranty won't apply to me anyhow. I suggest that in this situation, people just get the phone fixed on warranty if they have that option
First Steps:
A1) I unlocked the bootloader via HTCDev and used adb to flash CWM Touch Recovery.
A2) Restored the "M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus)"
A3) Phone now works correctly at this stage, but is still bootloader unlocked/tampered + CWM Touch Recovery
A4) While I may eventually flash the phone to an official Developer Edition
I would like to reinstall a factory recovery.img, then use revone to get rid of the bootloader "tampered" flag and relock it. (for OTA Updates, and the usual warranty concerns)
A5) I tried flashing both the boot.img and recovery.img from "OTA_M7_UL_JB_50_Rogers_WWE_1.29.631.17_R-1.29.631.4_release_318662" to get back to stock recovery, but I got a Red triangle.
Questions:
Q1): Does anyone know of a stock recovery.img I can use with Rogers firmware ? (SEE UPDATE BELOW)
Q2): Is there some trick to getting the OTA recovery/boot images I tried....working ? Is there some cache reset of somthing that needs to be done after flashing the stock recovery/boot imgs ? (SEE UPDATE BELOW)
Thanks in advance !
same issue
I too am looking for a rogers ruu or even the M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus) since bugsys page is down.
bump
LRail said:
Hello everyone,
This is my first post so I hope I don't end up being a "typical noob".
I'll try give the full info but keep it concise.
Background:
1) Carrier Unlocked HTC One M7 Originally on Rogers.
M7_UL PVT SHIP S-On RH
HBoot-1.44.000
Radio - 4A.14.3250.13
Open DSP 26.120.274.0202
emmc-boot
2) The phone was working perfectly after being hard reset, and configured without a sim.
3) After it was activated by the telco, the keyboard would would no longer work. Dialpad fine... menus fine... but no keyboard would pop up when selecting text fields. Did a full factory reset, and also tried clearing the Sense Touch data cache via Settings->App.
4) After trying various possible solutions I found online, I finally decided to try start from scratch by installing stock firmware.
So far:
A1) I unlocked the bootloader via HTCDev and used adb to flash CWM Touch Recovery.
A2) Restored the "M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus)"
A3) Phone now works correctly at this stage, but is still bootloader unlocked/tampered + CWM Touch Recovery
A4) While I may eventually flash the phone to an official Developer Edition
I would like to reinstall a factory recovery.img, then use revone to get rid of the bootloader "tampered" flag and relock it. (for OTA Updates, and the usual warranty concerns)
A5) I tried flashing both the boot.img and recovery.img from "OTA_M7_UL_JB_50_Rogers_WWE_1.29.631.17_R-1.29.631.4_release_318662" to get back to stock recovery, but I got a Red triangle.
Questions:
Q1): Does anyone know of a stock recovery.img I can use with Rogers firmware ?
Q2): Is there some trick to getting the OTA recovery/boot images I tried....working ? Is there some cache reset of somthing that needs to be done after flashing the stock recovery/boot imgs ?
Q3) If I eventually decide to install the Developer Edition firmware.. will the phone be effectively be a Dev phone ? (OTA updates... factory recovery/locked bootloader... no ID issues in the future..)
Thanks in advance !
P.S. For pure curiousity.... Am I correct in believing that revone can't clear the "tamper" flag and lock the bootloader with the custom recovery ?
Click to expand...
Click to collapse
double post
omgkush said:
I too am looking for a rogers ruu or even the M7 CWM Nandroid Backup / CID ROGER001 / 1.29.631.17 (Rogers - Thanks to Whampahoofus) since bugsys page is down.
bump
Click to expand...
Click to collapse
A lot of the RUUs and nandroid files were apparently "saved" to "Crushalot's" site: htc1guru.com
you can also get the file links in this thread: http://forum.xda-developers.com/showthread.php?t=2428276
I used that nandroid backup. I don't think a Rogers RUU exists (yet).
UPDATE ON MY PROGRESS:
1) I had success with using revone to get my M7 S-Off and removed the tampered flag in the bootloader.
I suspected that SuperSU wasn't working right becaue i hadn't been getting a root permission popup window on the phone.
On I reinstalled SuperSU, I got the root rights popup window when running revone, and it then worked.
2) I have realized that the firmware.zip, which is contained in the OTA update, contains the factory recovery and boot image I needed.
(I kept thinking that it was an incremental update and not a complete image or something, due to it's size.)
Therefore, instead of flashing the images individually, I used the firmware.zip from the OTA update to do a complete firmware update.
3) The Red triangle I was getting was, normal. I couldn't find clear info, so I assumed it was a bad sign because the only time i had seen the factory recovery was when it was upating with a red circle/arrow. So.. I thought the red circle/arrow was the icon you wanted to see.
Eventually I found a thread for a different HTC Phone, that also works for the M7
Result: You can use the volume up + power buttons to enter the recovery once the red triangle appears.
4) After installing the firmware (extracted from the OTA update), I used revone to set the phone back to S-ON, then locked it.
5) The OTA update then automatically installed, as a stock phone would.
6) After the OTA update, for some reason the tampered flag is back. I'll be using revone today to fix that.
UPDATE 2
:
6) After the OTA update, for some reason the tampered flag was back. I unlocked the phone, used revone to to get S-OFF, then used revone to reset the tamper flag and relock the bootloader, and then "fastboot oem writesecureflag 3" to set S-ON.
After 2 reboots the Tampered flag was back !
I'm suspecting that for the tampered flag to stay off I need to keep it S-OFF, which defeats the whole idea of trying to return it to stock.
Any ideas ?
Anyone working for Rogers want to leak an RUU ? hehe
Did you use CWM to flash the firmware.zip in step 2? I'm trying to follow your steps to get back to stock to obtain my stock rogers update but i'm getting lost as to what you're using to flash, recovery or fastboot.
LRail said:
A lot of the RUUs and nandroid files were apparently "saved" to "Crushalot's" site: htc1guru.com
you can also get the file links in this thread: http://forum.xda-developers.com/showthread.php?t=2428276
I used that nandroid backup. I don't think a Rogers RUU exists (yet).
UPDATE ON MY PROGRESS:
1) I had success with using revone to get my M7 S-Off and removed the tampered flag in the bootloader.
I suspected that SuperSU wasn't working right becaue i hadn't been getting a root permission popup window on the phone.
On I reinstalled SuperSU, I got the root rights popup window when running revone, and it then worked.
2) I have realized that the firmware.zip, which is contained in the OTA update, contains the factory recovery and boot image I needed.
(I kept thinking that it was an incremental update and not a complete image or something, due to it's size.)
Therefore, instead of flashing the images individually, I used the firmware.zip from the OTA update to do a complete firmware update.
3) The Red triangle I was getting was, normal. I couldn't find clear info, so I assumed it was a bad sign because the only time i had seen the factory recovery was when it was upating with a red circle/arrow. So.. I thought the red circle/arrow was the icon you wanted to see.
Eventually I found a thread for a different HTC Phone, that also works for the M7
Result: You can use the volume up + power buttons to enter the recovery once the red triangle appears.
4) After installing the firmware (extracted from the OTA update), I used revone to set the phone back to S-ON, then locked it.
5) The OTA update then automatically installed, as a stock phone would.
6) After the OTA update, for some reason the tampered flag is back. I'll be using revone today to fix that.
UPDATE 2
:
6) After the OTA update, for some reason the tampered flag was back. I unlocked the phone, used revone to to get S-OFF, then used revone to reset the tamper flag and relock the bootloader, and then "fastboot oem writesecureflag 3" to set S-ON.
After 2 reboots the Tampered flag was back !
I'm suspecting that for the tampered flag to stay off I need to keep it S-OFF, which defeats the whole idea of trying to return it to stock.
Any ideas ?
Anyone working for Rogers want to leak an RUU ? hehe
Click to expand...
Click to collapse
Tampered will come back the second you flash a recovery. Best to stay S-OFF
I've been in a similar situation where I had to send my phone in for repair and couldn't get the tamper flag to stay off.
I found out it was because I was trying to remove the flag and lock the bootloader and S-On on 1.29.631.17
What I had to do was restore using CWM back to 631.4 then flash stock recovery then remove flag, lock bootloader, then S-On.
The tamper flag should stay off you can try rebooting a couple of times then boot into bootloader to check.
Then I ran the OTA updates and i'm on 631.17 at the moment and my tamper flag is still off.
Hope this helps.
PS. I believe the latest JB4.3 OTA update upgrades the hboot to 1.55 so revone would not work on it. Not planning to try it myself but if anyone can verify this would be great
ysl00 said:
I've been in a similar situation where I had to send my phone in for repair and couldn't get the tamper flag to stay off.
I found out it was because I was trying to remove the flag and lock the bootloader and S-On on 1.29.631.17
What I had to do was restore using CWM back to 631.4 then flash stock recovery then remove flag, lock bootloader, then S-On.
The tamper flag should stay off you can try rebooting a couple of times then boot into bootloader to check.
Then I ran the OTA updates and i'm on 631.17 at the moment and my tamper flag is still off.
Hope this helps.
PS. I believe the latest JB4.3 OTA update upgrades the hboot to 1.55 so revone would not work on it. Not planning to try it myself but if anyone can verify this would be great
Click to expand...
Click to collapse
Thanks for the heads up. If I get a bunch of free time I may just test that after doing a new full backup.
Not sure about the Rogers 4.3 OTA.
I'm running currently the phone with Developer Edition ROM+CID and can confirm that it's 4.3 OTA updates hboot to 1.55.
After the update my phone is still s-off.
I have previously rolled back to an older hboot via a firmware flash.
Since the phone is still S-OFF, I assume I can do that again if needed.
EddyOS said:
Tampered will come back the second you flash a recovery. Best to stay S-OFF
Click to expand...
Click to collapse
Thanks For the reply Eddy.
Recovery flashing sets the tampered flag even if it's a factory recovery from an OTA being flashed ?
I agree on the S-OFF normally.
This was a test to see if I could get it back to full stock for warranty if needed, and S-OFF would not be acceptable in that case.
please help!
PLEASE! I have been trying to get Rogers stock Canada back on my HTC since the day after release lol..
I have this nandroid backup but can't figure out how to flash it... I also can't relock to try and flash a legit version
So pleaseeee how do I install this!!! I am using cwm I tried making a folder called backups in clockworkmod dir but it doesn't pickup the nandroid backup... Help plz!!!!
So what do I do with the M7 CWM Nandroid Backup CID ROGER001 1.29.631.17 2013-06-03.zip
I can't flash it and it won't recognise it as a backup, how do I even install it?
Nobody has mentioned how to use this zip, it isn't a tar file or flashable so what do I do with it?
millarrjm said:
PLEASE! I have been trying to get Rogers stock Canada back on my HTC since the day after release lol..
I have this nandroid backup but can't figure out how to flash it... I also can't relock to try and flash a legit version
So pleaseeee how do I install this!!! I am using cwm I tried making a folder called backups in clockworkmod dir but it doesn't pickup the nandroid backup... Help plz!!!!
Click to expand...
Click to collapse
Esposition said:
So what do I do with the M7 CWM Nandroid Backup CID ROGER001 1.29.631.17 2013-06-03.zip
I can't flash it and it won't recognise it as a backup, how do I even install it?
Nobody has mentioned how to use this zip, it isn't a tar file or flashable so what do I do with it?
Click to expand...
Click to collapse
Simply doing a web search for info would have given you the answers on many many webpages and some youtube videos.
http://bit.ly/1a6d88A
http://bit.ly/1a6ewZ5
Quick answer:
1) Nandroid backups are created and used by the custom recovery "clockworkmod"
2)You need to install a CWM custom recovery (i like the touch version), then unzip the nandroid backup file to the /clockworkmod/backup/ folder. It will create a new folder there. I used the program "Android File Transfer" to copy the files from my laptop to the phone.
3) Once the backup file is on your phone, to restore the backup, you simply boot into recovery and restore the backup as explained in those web pages or youtube videos.
If you have specific things you have tried.... folder names... etc. then ask a question in detail.
You will then have a much higher chance of getting a correct answer (or even an answer at all)
Hope that helps a bit...
Cheers
PS:
millarrjm
FWIW: Simply asking general questions with "pleaseee" and a bunch of exclamation points is a quick way to be ignored (especially in this forum meant for people with some technical skill) See this video (which you should have seen on signup to the forum) for info: http://www.youtube.com/watch?v=JmvCpR45LKA
re.
LRail said:
Simply doing a web search for info would have given you the answers on many many webpages and some youtube videos.
http://bit.ly/1a6d88A
http://bit.ly/1a6ewZ5
Quick answer:
1) Nandroid backups are created and used by the custom recovery "clockworkmod"
2)You need to install a CWM custom recovery (i like the touch version), then unzip the nandroid backup file to the /clockworkmod/backup/ folder. It will create a new folder there. I used the program "Android File Transfer" to copy the files from my laptop to the phone.
3) Once the backup file is on your phone, to restore the backup, you simply boot into recovery and restore the backup as explained in those web pages or youtube videos.
If you have specific things you have tried.... folder names... etc. then ask a question in detail.
You will then have a much higher chance of getting a correct answer (or even an answer at all)
Hope that helps a bit...
Cheers
PS:
millarrjm
FWIW: Simply asking general questions with "pleaseee" and a bunch of exclamation points is a quick way to be ignored (especially in this forum meant for people with some technical skill) See this video (which you should have seen on signup to the forum) for info: http://www.youtube.com/watch?v=JmvCpR45LKA
Click to expand...
Click to collapse
I tried that. CWM version 6.+ doesn't save to the backup folder anymore. And won't read a restore I put in it either... Ie. The rogers off the bugzylawson site.
bklam said:
Did you use CWM to flash the firmware.zip in step 2? I'm trying to follow your steps to get back to stock to obtain my stock rogers update but i'm getting lost as to what you're using to flash, recovery or fastboot.
Click to expand...
Click to collapse
Hello bklam,
Sorry, I missed your question.
No. I used CWM only to restore the "Whampahoofus"' nandroid backup.
That backup is "almost" 100% stock. Unfortunately it contains a custom recovery and won't (in my experience) work for normal OTA updates.
To solve this I decided to extract the factory firmware from one of the old Rogers OTA ("unrar" will extact the files from the OTA), and flash that.
To flash it I used the quick instructions in the 1st post of this thread-->http://forum.xda-developers.com/showthread.php?t=2182823
(I believe there were more details instructions on firmware.zip flashing in another thread but I can't find it at the moment)
Note to other readers: There can be confusion about the word "firmware". Some people use it describe the Rom.
In this case, I'm referring to the hboot, boot and recovery images in a single special file called firmware.zip. I believe in some cases it can also include the radio software too.
If I ever get a chance to get this 100% tested and figured out, I'll post a step by step method.
At this point it's just a overview of what I tried, and looking for other members advice.
Unfortunately, as you can see from my posts, it didn't work 100% for me. It gave me the stock Rogers HTC One Rom/software with OTA updates, but the bootloader still had the tampered flag.
Check out ysl00's post above. He/She evidently had it working 100% without the tamper flag.
Not sure if Rogers has a 4.3 OTA yet, but that might fix the flag since it includes a firmware update along with the OS update.
Post back with your results !
Did you see my above reply lrail? .. just saw u post after thought you might have missed ot!! Thanks so much fpr the help and replies. You are the man!
figured it out.
I thoight the explorer I was using showed all files on phone. TO FIX this issue download root explorer and you can see the other directories... Goto data>media>clockworkmod>backups .. it isnt in the sd dir on your phone.
millarrjm said:
Did you see my above reply lrail? .. just saw u post after thought you might have missed ot!! Thanks so much fpr the help and replies. You are the man!
Click to expand...
Click to collapse
Sorry about that. No I didn't see it until just now. I guess thats the problem with having 20 browser tabs open at once. hehe
millarrjm said:
I thoight the explorer I was using showed all files on phone. TO FIX this issue download root explorer and you can see the other directories... Goto data>media>clockworkmod>backups .. it isnt in the sd dir on your phone.
Click to expand...
Click to collapse
Good to hear. I read your post. I thought..."Is he using a root file manager ?" then read your next post….
I was also going to suggest a guaranteed way to determine where the CWM backups are being stored on a phone.
This way it doesn't matter which version of CWM, which phone or if the back directory exists yet.
Simply create a test backup and see where it goes. Then copy the Nandroid backup that you want to restore, there.
I should mention that I'm currently running my phone as a Developer Edition (Brightstar) 4.3 with OTAs, S-OFF, and unlocked.
It's works perfectly. Only the Carrier ID (CID) needed to be changed. The MID is the same.
I assume that a brightstar RUU will work on it now, even if the phone was locked and S-ON.
I have a few more things I want to tweak on it, then I'll likely make a backup and try restore it to stock rogers again so that I can create a clear how-to.
What's interesting, is that the Developer Edition OS seems to be the same as the Rogers Edition OS (without the rogers apps which can be uninstalled).
The only reason I think it might be a better choice is that the Dev Edition should get OTA updates earlier than the Rogers Edition.
I tried the custom Viper Rom 2.6.x but couldn't get an LTE connection. I suspect that was due to APN settings, but I didn't confirm that.
Anyone got the Viper Rom fully working on a Roger HTC M7 ?
Alright so I've successfully re-installed that nandroid backup and enabled s-off, re-locked, and removed the tampered notification.
When I try to do the OTA update it just hangs at the bug fix1. It default opens and tries to install it through cwm recovery, I've never done any OTA updates before so I assume this is normal?
How can I fix it hanging at bug fix1?
Esposition said:
Alright so I've successfully re-installed that nandroid backup and enabled s-off, re-locked, and removed the tampered notification.
When I try to do the OTA update it just hangs at the bug fix1. It default opens and tries to install it through cwm recovery, I've never done any OTA updates before so I assume this is normal?
How can I fix it hanging at bug fix1?
Click to expand...
Click to collapse
The OTAs don't work with custom recovery. You need the factory recovery
I am relatively new to the HTC. I am running a Stock rooted image with TWRP 2.6.3.0 recovery.
The OTA for 4.3 came down and whenever I start the install the phone reboots and ends up in twrp recovery and I do not know where to go from there. I tried searching the forums but the search is down at the moment.
Here comes the Noob question : A little help please as I am not sure where to go next?
I just asked almost the same question. One thing everyone says is don't take the OTA update.
I found a few places with the pre-rooted stock ROM update, but it does not include the firmware update, that is a separate flashable zip, but I'm not sure how to update the "Full Firmware w/o hboot, boot, recovery" without S-off. I don't know if doing the "full firmware update" will mess up my recovery/root.
http://forum.xda-developers.com/showthread.php?t=2467607
http://forum.xda-developers.com/showthread.php?p=46110767
generosity21 said:
I just asked almost the same question. One thing everyone says is don't take the OTA update.
I found a few places with the pre-rooted stock ROM update, but it does not include the firmware update, that is a separate flashable zip, but I'm not sure how to update the "Full Firmware w/o hboot, boot, recovery" without S-off. I don't know if doing the "full firmware update" will mess up my recovery/root.
http://forum.xda-developers.com/showthread.php?t=2467607
http://forum.xda-developers.com/showthread.php?p=46110767
Click to expand...
Click to collapse
I have been all over the forums looking at this and came up with squat.
If I take the OTA will I loose root? Can't seem to find an answer to that.
I was running an earlier version of twrp and thought that might be the issue but after updating twrp I am still at the same place. The sprint update notifications are still coming.
If I find something I will post it here.
Must be on stock firmware and recovery to take the update guys.... It has been posted numerous times. You must also ahve the stock kernel.
Yes you will lose root if you take the OTA, you always do. Also TWRP appears to be broken with 4.3, no responsive, etc, etc
jziggy101 said:
I am relatively new to the HTC. I am running a Stock rooted image with TWRP 2.6.3.0 recovery.
The OTA for 4.3 came down and whenever I start the install the phone reboots and ends up in twrp recovery and I do not know where to go from there. I tried searching the forums but the search is down at the moment.
Here comes the Noob question : A little help please as I am not sure where to go next?
Click to expand...
Click to collapse
you can't flash the update with custom recovery installed, you need thev stock recovery image which is posted numerous times in this forum
jziggy101 said:
The OTA for 4.3 came down and whenever I start the install the phone reboots and ends up in twrp recovery and I do not know where to go from there.
Click to expand...
Click to collapse
You have to have stock recovery to take the OTA
generosity21 said:
I just asked almost the same question. One thing everyone says is don't take the OTA update.
Click to expand...
Click to collapse
You can take the OTA if you are prepared for, and know what to do - also, don't take it if you are currently S-ON and ever want S-OFF because it comes with a new hboot.
jziggy101 said:
If I take the OTA will I loose root? Can't seem to find an answer to that.
Click to expand...
Click to collapse
Yes, you will probably lose root unless you are using the OTA preservation function of SuperSU and it works for you, but either way, it is easy to get it back.
Bottom line, how you take the OTA depends on whether you are S-ON or S-OFF, the latter is much easier. Assuming you are S-ON and running the Sprint stock ROM, here is what you need to do.
1. Flash stock recovery.
2. Lock the bootloader
3. Take the OTA update
4. Unlock the bootloader
5. Flash custom recovery (TWRP)
6. Flash root (SuperSU)
If you are S-off you can skip numbers 2 and 4.
Aldo101t said:
you can't flash the update with custom recovery installed, you need thev stock recovery image which is posted numerous times in this forum
Click to expand...
Click to collapse
Thanks for the replies. It's very confusing whether people are referencing the OTA update, or the tweaked, rooted downloadable update (http://forum.xda-developers.com/showthread.php?p=46110767). This forum should be friendly to questions when things are confusing.
Even with the two replies on this thread, it's still not clear to me if the downloadable (NOT OTA) updates can be flashed with a custom recovery, or what the procedure is for an S-On device regarding firmware and ROM updates. Sorry to offend anyone if they feel this has been answered somewhere in the forums, but it's still unclear to some of us.
EDIT:
@PillowMetal Thanks for the very helpful reply. I guess the next question is, is it possible to get S-Off on 1.31.651.2 without losing everything?
Kraizk said:
Must be on stock firmware and recovery to take the update guys.... It has been posted numerous times. You must also ahve the stock kernel.
Yes you will lose root if you take the OTA, you always do. Also TWRP appears to be broken with 4.3, no responsive, etc, etc
Click to expand...
Click to collapse
If your not stock ota will mess you up big time. I just rooted my HTC one on sprint with the update that was on a swap out for bad speakers . Twrp isn't responsive if you use the one in toolkit. I downloaded 2.6.3 loaded it in the data folder of toolkit installed through the toolkit and bam... I got response out of Twrp. I'll find the link and post for you guys.
Sent from my SGH-M919 using Tapatalk 4
generosity21 said:
@PillowMetal Thanks for the very helpful reply. I guess the next question is, is it possible to get S-Off on 1.31.651.2 without losing everything?
Click to expand...
Click to collapse
Not without losing everything because it requires tricking your bootloader by writing to your misc partition, then running the 1.29 RUU - http://forum.xda-developers.com/showthread.php?t=2390821
http://techerrata.com/browse/twrp2/m7wls
This is the link for people who are stock and unlocking their phone. If you're using the toolkit put it in the data folder and rename to twrp. Be careful though the other files are the same name but in capital letters! Flash it and u will have responsive twrp and rooted 4.3 ota
Sent from my SGH-M919 using Tapatalk 4
---------- Post added at 02:10 PM ---------- Previous post was at 01:34 PM ----------
Anyone having poor reception?
Sent from my SGH-M919 using Tapatalk 4
PillowMetal said:
Not without losing everything because it requires tricking your bootloader by writing to your misc partition, then running the 1.29 RUU - http://forum.xda-developers.com/showthread.php?t=2390821
Click to expand...
Click to collapse
Tried this once more, and successfully got S-off without downgrading anything, as a few others have reported.
http://forum.xda-developers.com/showthread.php?t=2314582
Brand new device Stock 1.29 Rom Uninstalled SuperSU Unrooted for Updates
PillowMetal said:
You have to have stock recovery to take the OTA
You can take the OTA if you are prepared for, and know what to do - also, don't take it if you are currently S-ON and ever want S-OFF because it comes with a new hboot.
Yes, you will probably lose root unless you are using the OTA preservation function of SuperSU and it works for you, but either way, it is easy to get it back.
Bottom line, how you take the OTA depends on whether you are S-ON or S-OFF, the latter is much easier. Assuming you are S-ON and running the Sprint stock ROM, here is what you need to do.
1. Flash stock recovery.
2. Lock the bootloader
3. Take the OTA update
4. Unlock the bootloader
5. Flash custom recovery (TWRP)
6. Flash root (SuperSU)
If you are S-off you can skip numbers 2 and 4.
Click to expand...
Click to collapse
Think I messed up a step in my attempt to return to unroot to be ready to get the 4.3 jellybean update. I was stock rom 1.29, rooted, SuperSU, twerp 2.6.3. Unlocked sim. I unistalled SuperSU using the full unroot option and relocked the bootloader. When the phone attempts to update it reboots into the bootloader straight into fastboot. Will not reboot and stay in hboot. Recovery option does nothing. Do I even want the ota 1.31? Do I just skip the OTA 1.31 and get the 4.3 jellybean update. I'm new first Android phone. Sorry for the idiocy I have portrayed here. Hope someone can help with knowledge of OTA's and Jellybean update. My problem seems so simple compared to all the other posts I read but I can't seem to figure it out on my own. Thanks everyone
upowersystems said:
Think I messed up a step in my attempt to return to unroot to be ready to get the 4.3 jellybean update. I was stock rom 1.29, rooted, SuperSU, twerp 2.6.3. Unlocked sim. I unistalled SuperSU using the full unroot option and relocked the bootloader. When the phone attempts to update it reboots into the bootloader straight into fastboot. Will not reboot and stay in hboot. Recovery option does nothing. Do I even want the ota 1.31? Do I just skip the OTA 1.31 and get the 4.3 jellybean update. I'm new first Android phone. Sorry for the idiocy I have portrayed here. Hope someone can help with knowledge of OTA's and Jellybean update. My problem seems so simple compared to all the other posts I read but I can't seem to figure it out on my own. Thanks everyone
Click to expand...
Click to collapse
Did you flash stock recovery? The OTA needs that. You did not need to unroot though. Also not sure if having an unlocked SIM interferes with OTA, never performed that myself. Since we don't have RUUs for anything later than 1.29, then yes, you will need to take the 1.31 OTA update first, then the 3.04 update.
Twerp to Stock recovery
PillowMetal said:
Did you flash stock recovery? The OTA needs that. You did not need to unroot though. Also not sure if having an unlocked SIM interferes with OTA, never performed that myself. Since we don't have RUUs for anything later than 1.29, then yes, you will need to take the 1.31 OTA update first, then the 3.04 update.
Click to expand...
Click to collapse
Darn, no I did not flash the stock recovery. Also I read another thread said I needed to unroot!lol So I was back tracing my steps to unroot, so I thought.. I did save the original backup before installing Twerp 2.6.3 and rooting so its in there if I can get to it. I really dont know how to proceed from here. There are no options in the bootloader to proceed.
Twerp vs Stock recovery
PillowMetal said:
Did you flash stock recovery? The OTA needs that. You did not need to unroot though. Also not sure if having an unlocked SIM interferes with OTA, never performed that myself. Since we don't have RUUs for anything later than 1.29, then yes, you will need to take the 1.31 OTA update first, then the 3.04 update.
Click to expand...
Click to collapse
Do I need to figure out how to flash or return to stock recovery from Twerp or can I simploy flash the 1.29 ruu back in to the device for a return to stock?
Twerp 2.6.3
PillowMetal said:
Did you flash stock recovery? The OTA needs that. You did not need to unroot though. Also not sure if having an unlocked SIM interferes with OTA, never performed that myself. Since we don't have RUUs for anything later than 1.29, then yes, you will need to take the 1.31 OTA update first, then the 3.04 update.
Click to expand...
Click to collapse
Kraizk said:
Must be on stock firmware and recovery to take the update guys.... It has been posted numerous times. You must also ahve the stock kernel.
Yes you will lose root if you take the OTA, you always do. Also TWRP appears to be broken with 4.3, no responsive, etc, etc
Click to expand...
Click to collapse
Maybe you can help. Will a re-install of the stock ruu 1.29 without removing twerp 2.6.3 and reverting to stock recovery cause issues.. Will this just completely re-install everything including stock Recovery or will twerp remain. I am running stock 1.29 rom, did save an original backup when I loaded twerp. How would I get in it to load it. Then I would not need to load the complete ruu. When I try for the ota it used to reboot to twerp. Since I unrooted it reboots to bootloader and there are NO options for load, Recovery option doesnt work. I have asked this question on several threads no one seems to know or its too simple for them to reply since I'm a newb. Thanks
upowersystems said:
Maybe you can help. Will a re-install of the stock ruu 1.29 without removing twerp 2.6.3 and reverting to stock recovery cause issues.. Will this just completely re-install everything including stock Recovery or will twerp remain. I am running stock 1.29 rom, did save an original backup when I loaded twerp. How would I get in it to load it. Then I would not need to load the complete ruu. When I try for the ota it used to reboot to twerp. Since I unrooted it reboots to bootloader and there are NO options for load, Recovery option doesnt work. I have asked this question on several threads no one seems to know or its too simple for them to reply since I'm a newb. Thanks
Click to expand...
Click to collapse
Are you S-Off? Is so, the easiest way to to get up to date for you would be to RUU back to 1.29 which will restore everything on your phone back to stock including recovery. Make sure you copy anything you want to keep off your phone's internal memory (/sdcard) because it will wipe that too.
But from there, you can then easily take the OTA update for 1.31, then take the update for 3.04. Now you have the latest and greatest and can now flash TWRP, SuperSU, and any 4.3 ROM you want. With S-Off, you do not need the bootloader unlocked, but if you want to, you can flash an old hboot 1.29 from May or earlier and use revone -u, or go through htcdev to unlock. But like I said, totally unnecessary and more of a pain for me than it is worth.
Now, if you are S-ON, that is a totally different story, you cannot flash back to 1.29 RUU unless you still on 1.29 and have not updated to 1.31 yet. If you are currently on 1.31 you will have to try and restore the backup you said you had through TWRP, flash stock recovery from fastboot, re-lock your bootloader and all kinds of other crap to get to 3.04 and unlocked and rooted again.
You would have to tell me more about what condition your phone is currently in. hboot version? recovery custom or stock? ROM version installed? S-On or S-Off, etc.
Current State
PillowMetal said:
Are you S-Off? Is so, the easiest way to to get up to date for you would be to RUU back to 1.29 which will restore everything on your phone back to stock including recovery. Make sure you copy anything you want to keep off your phone's internal memory (/sdcard) because it will wipe that too.
But from there, you can then easily take the OTA update for 1.31, then take the update for 3.04. Now you have the latest and greatest and can now flash TWRP, SuperSU, and any 4.3 ROM you want. With S-Off, you do not need the bootloader unlocked, but if you want to, you can flash an old hboot 1.29 from May or earlier and use revone -u, or go through htcdev to unlock. But like I said, totally unnecessary and more of a pain for me than it is worth.
Now, if you are S-ON, that is a totally different story, you cannot flash back to 1.29 RUU unless you still on 1.29 and have not updated to 1.31 yet. If you are currently on 1.31 you will have to try and restore the backup you said you had through TWRP, flash stock recovery from fastboot, re-lock your bootloader and all kinds of other crap to get to 3.04 and unlocked and rooted again.
You would have to tell me more about what condition your phone is currently in. hboot version? recovery custom or stock? ROM version installed? S-On or S-Off, etc.
Click to expand...
Click to collapse
Was told if I un-rooted and relocked the bootloader I should be able to update. This is a brand new phone. No data to worry about losing.
Currently:
Stock ROM 1.29, S-On, (Was rooted) Now Unrooted
Hboot 1.44 (Bootloader relocked)
Twerp Recovery (although with attempt to update to 1.31 twerp did not open as it did in prior attempts to update before unroot)
Now You have opened an interesting subject. Do I need to S-off before any updates to defeat the new hboot? New stuff is being written for the new hboot as we speak right? Read a thread last night about it. Sounded like they could s-off a 1.31 and I wouldn't need to worry about s-off'ing before upgrading. It also seems like I should be able to re load the backup of the stock recovery somehow and skip the complete load of the ruu 1.29 since I am already running it. I am probably making somethong more difficult than it needs to be but I would like to learn the little details. My first Android here. Want to learn quickly here as I Also bought the New 4g LTE Nexus 7 tablet with jelly bean. I get 4g LTE from T-mobile and just hotspot my phone.
upowersystems said:
Was told if I un-rooted and relocked the bootloader I should be able to update. This is a brand new phone. No data to worry about losing.
Currently:
Stock ROM 1.29, S-On, (Was rooted) Now Unrooted
Hboot 1.44 (Bootloader relocked)
Twerp Recovery (although with attempt to update to 1.31 twerp did not open as it did in prior attempts to update before unroot)
Now You have opened an interesting subject. Do I need to S-off before any updates to defeat the new hboot? New stuff is being written for the new hboot as we speak right? Read a thread last night about it. Sounded like they could s-off a 1.31 and I wouldn't need to worry about s-off'ing before upgrading. It also seems like I should be able to re load the backup of the stock recovery somehow and skip the complete load of the ruu 1.29 since I am already running it. I am probably making somethong more difficult than it needs to be but I would like to learn the little details. My first Android here. Want to learn quickly here as I Also bought the New 4g LTE Nexus 7 tablet with jelly bean. I get 4g LTE from T-mobile and just hotspot my phone.
Click to expand...
Click to collapse
If you don't want to go the RUU route, then the condition your phone is currently in would only require you to flash stock recovery from 1.29.651.10 (which I got from the actual OTA file). The problem is that your bootloader is now locked and your are S-ON, so you will not be able to flash stock recovery unless you unlock again. If you still have the unlock.bin file from htcdev, that will still work if was done on your current hboot version, otherwise, you would have to visit the site again. Then flash stock recovery, and relock bootloader again. Then the 1.31 update will succeed followed by the 3.04 update.
As far as S-OFF, if you ever want it, you should get it now before updating to anything - even 1.31 (as long as the date on your hboot is May 2013 or earlier). Because, you WILL get the new hboots when you update to 1.31 and 3.04 and since you are S-ON, you will be stuck with it. There is no guarantee that you will ever be able to get S-OFF again with the new hboots. People on hboot 1.54 have been waiting and clamoring for months and there has been no progress and other phones have never even been able to get S-OFF.
Using revone to S-OFF will not wipe your phone or remove anything, it does not require root, and it you do not need to be unlocked. I have performed it from the computer 3 times on Sprint phones and even have made a post about how to make it succeed. There is also a video showing how it can be done on the phone too via terminal emulator, but that method requires root.
Having S-OFF just makes life so much easier, but with it carries great responsibility because security has been turned off and you need to know what you are flashing or you can run into trouble. But as long as you can get to the bootloader, you can recover.
PillowMetal said:
You have to have stock recovery to take the OTA
You can take the OTA if you are prepared for, and know what to do - also, don't take it if you are currently S-ON and ever want S-OFF because it comes with a new hboot.
Yes, you will probably lose root unless you are using the OTA preservation function of SuperSU and it works for you, but either way, it is easy to get it back.
Bottom line, how you take the OTA depends on whether you are S-ON or S-OFF, the latter is much easier. Assuming you are S-ON and running the Sprint stock ROM, here is what you need to do.
1. Flash stock recovery.
2. Lock the bootloader
3. Take the OTA update
4. Unlock the bootloader
5. Flash custom recovery (TWRP)
6. Flash root (SuperSU)
If you are S-off you can skip numbers 2 and 4.
Click to expand...
Click to collapse
On the att variant you don't need to relock the boot loader to ota.
Sent from my XT1058 using Tapatalk 2
I think this is going to need an experienced dev to answer. Its a small question and probably a small answer but I'm going to put all the information I can.
Ok, so my background is that I recently returned my phone stock, the steps I took were:
S-off, flash RUU, root, remove tampered and unlocked flags, unroot, flash stock recovery, lock the bootloader, s-on.
I then OTAed myself up to 4.3 sense 5.5.
My issue is that having returned to stock, my phone has some instabilities like:
1. it randomly restarted once,
2. I can't lock the device (but can power it off so its not the button broken),
3. and once I opened the camera and the camera bit only took a square of the screen, as in it didn't fill up the whole screen, and the camera menus were messed up (when I rotated, half of the menus were cropped out of the screen, but it went back to normal around 15 seconds later).
Anyway, reason I'm posting this is that I have a niggling feeling that, being originally a CID J15 and x.xx.415.x (middle east firmware which has no RUU available) firmware device, I flashed a 401.x (Europe I think) firmware RUU, this is giving my device some issues. Would that be possible? I got the RUU from htc1guru and it listed J15 as one of the suitable CIDs for the RUU. I also, after unrooting, relocking bootloader and s-on, flashed the RUU again, because as far as I know the RUU (something made by HTC officially) will not flash on a CID that it was not made for, and it worked just fine. So, thats not the issue then is it? I can't think of anything else, I didn't even install any apps yet, only whatsapp.
3alaawi said:
I think this is going to need an experienced dev to answer. Its a small question and probably a small answer but I'm going to put all the information I can.
Ok, so my background is that I recently returned my phone stock, the steps I took were:
S-off, flash RUU, root, remove tampered and unlocked flags, unroot, flash stock recovery, lock the bootloader, s-on.
I then OTAed myself up to 4.3 sense 5.5.
My issue is that having returned to stock, my phone has some instabilities like:
1. it randomly restarted once,
2. I can't lock the device (but can power it off so its not the button broken),
3. and once I opened the camera and the camera bit only took a square of the screen, as in it didn't fill up the whole screen, and the camera menus were messed up (when I rotated, half of the menus were cropped out of the screen, but it went back to normal around 15 seconds later).
Anyway, reason I'm posting this is that I have a niggling feeling that, being originally a CID J15 and x.xx.415.x (middle east firmware which has no RUU available) firmware device, I flashed a 401.x (Europe I think) firmware RUU, this is giving my device some issues. Would that be possible? I got the RUU from htc1guru and it listed J15 as one of the suitable CIDs for the RUU. I also, after unrooting, relocking bootloader and s-on, flashed the RUU again, because as far as I know the RUU (something made by HTC officially) will not flash on a CID that it was not made for, and it worked just fine. So, thats not the issue then is it? I can't think of anything else, I didn't even install any apps yet, only whatsapp.
Click to expand...
Click to collapse
Could you provide the following informations? Because then it's easier to determine the reason for the misbehaviour...
-Did you also have these issues with the firmware you got from the RUU, I mean did you also experience these issues without any OTAs?
-Could you post the link to the RUU you used? Because I also RUUed my phone a few days ago with the same procedure.. but actually, I am from Europe
-Did you flash the stock hboot 1.44 before flashing the RUU?
And as far my knowledge goes, the middle east HTC One doesn't have other hardware, it only has a bit different software, so this shouldn't be the cause for the issues..
Other than that:
Unlock your phone, use a custom recovery and flash a different ROM, and if it works in this case, you can exclude other firmware parts than the system...
And maybe you wanna try out one of these RUUs:
http://www.androidruu.com/index.php?developer=M7
Maybe there is one for you
LibertyMarine said:
Could you provide the following informations? Because then it's easier to determine the reason for the misbehaviour...
-Did you also have these issues with the firmware you got from the RUU, I mean did you also experience these issues without any OTAs?
-Could you post the link to the RUU you used? Because I also RUUed my phone a few days ago with the same procedure.. but actually, I am from Europe
-Did you flash the stock hboot 1.44 before flashing the RUU?
And as far my knowledge goes, the middle east HTC One doesn't have other hardware, it only has a bit different software, so this shouldn't be the cause for the issues..
Other than that:
Unlock your phone, use a custom recovery and flash a different ROM, and if it works in this case, you can exclude other firmware parts than the system...
And maybe you wanna try out one of these RUUs:
http://www.androidruu.com/index.php?developer=M7
Maybe there is one for you
Click to expand...
Click to collapse
Hello,
Here's the RUU I flashed:
http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
It didn't flash first and it said on the link I just posted that I may need hboot 1.44 and so I downloaded and flashed that one and then it worked.
I couldn't tell you if I experienced this before the OTA or not because I OTAed one update after the other immediately. What I can say however is that the home and back button seemed less sensitive to touch in the initial builds, but one of the OTAs made it how it always is.
A for unlocking again and flashing a different rom, I guess I could flash a stock 401 4.3 rom and redo the unrooting process. I just found it really odd that I'm having these issues whilst being on full stock, I've only ever had these issues when flashing unreliable roms and kernels. You lost me at "excluding other firmware parts" though. My main concern is that I want zero chance for anyone to know that my devices was rooted once upon a time, so I wouldn't want to compromise that.
3alaawi said:
Hello,
Here's the RUU I flashed:
http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
It didn't flash first and it said on the link I just posted that I may need hboot 1.44 and so I downloaded and flashed that one and then it worked.
I couldn't tell you if I experienced this before the OTA or not because I OTAed one update after the other immediately. What I can say however is that the home and back button seemed less sensitive to touch in the initial builds, but one of the OTAs made it how it always is.
A for unlocking again and flashing a different rom, I guess I could flash a stock 401 4.3 rom and redo the unrooting process. I just found it really odd that I'm having these issues whilst being on full stock, I've only ever had these issues when flashing unreliable roms and kernels. You lost me at "excluding other firmware parts" though. My main concern is that I want zero chance for anyone to know that my devices was rooted once upon a time, so I wouldn't want to compromise that.
Click to expand...
Click to collapse
Ok.. I flashed the zip.. but this really shouldn't be an issue
But with "excluding other firmware parts" I meant.. if you try another ROM and there it works, you should definitely know that the issue is caused by the system and not by hardware or bootloader etc...
Try another ROM and if it works fine, you can try another RUU.. maybe the zip.. and then you can re-unroot your HTC One and then they won't have any chance finding out what you'd done
3alaawi said:
Hello,
Here's the RUU I flashed:
http://www.htc1guru.com/dld/ruu_m7_...1-27_10-31-1131-05_release_310878_signed-exe/
It didn't flash first and it said on the link I just posted that I may need hboot 1.44 and so I downloaded and flashed that one and then it worked.
I couldn't tell you if I experienced this before the OTA or not because I OTAed one update after the other immediately. What I can say however is that the home and back button seemed less sensitive to touch in the initial builds, but one of the OTAs made it how it always is.
A for unlocking again and flashing a different rom, I guess I could flash a stock 401 4.3 rom and redo the unrooting process. I just found it really odd that I'm having these issues whilst being on full stock, I've only ever had these issues when flashing unreliable roms and kernels. You lost me at "excluding other firmware parts" though. My main concern is that I want zero chance for anyone to know that my devices was rooted once upon a time, so I wouldn't want to compromise that.
Click to expand...
Click to collapse
Did it work? Or can I provide more help?
LibertyMarine said:
Did it work? Or can I provide more help?
Click to expand...
Click to collapse
I actually just booted into the bootloader and turned the phone on again. Then I could lock my device again and it seemed stable though I didn't have much time to test it. I just sent it in for repairs earlier today (for another issue, I have the camera tint problem with my device).
I'm guessing the previous times I reset it, it had that option in the power menu on (fast boot or something like that) maybe thats why the problems didn't go away?
Anyway, thanks for your help
Dont't buy HTC. They Thef's .
This is Problem.... Producer send fake updates to destroy all firmware stock too. I Have Desire 626 from ORANGE PL and my phone get update with this same problems. One idea. Dont't buy HTC. They Thef's .
OK, so about 9 months ago I rooted my Three branded HTC one, installed CWM recovery and put ARHD12 on there and it's been brilliant. Three are now rolling out the 4G radio updates which as far as I understand is entirely separate to any ROM such as ARHD. So how do I get the radio update? Do I have to go back to stock? If so, now's the time to confess I didn't take a backup before I installed ARHD. So I guess I need the most recent Three RUU - do I have to remove CWM before I install it? I'm not a n00b - I managed to do this on my own last time and I'm fairly technically competent. The only problem I have now is one of time - I can't spend an entire day figuring stuff out due to the 9-month old bundle of joy that requires a fair bit of attention! If you can help me with a fairly simple outline of what to do in what order, that would be very much appreciated. Cheers!
ShadowTD said:
OK, so about 9 months ago I rooted my Three branded HTC one, installed CWM recovery and put ARHD12 on there and it's been brilliant. Three are now rolling out the 4G radio updates which as far as I understand is entirely separate to any ROM such as ARHD. So how do I get the radio update? Do I have to go back to stock? If so, now's the time to confess I didn't take a backup before I installed ARHD. So I guess I need the most recent Three RUU - do I have to remove CWM before I install it? I'm not a n00b - I managed to do this on my own last time and I'm fairly technically competent. The only problem I have now is one of time - I can't spend an entire day figuring stuff out due to the 9-month old bundle of joy that requires a fair bit of attention! If you can help me with a fairly simple outline of what to do in what order, that would be very much appreciated. Cheers!
Click to expand...
Click to collapse
You will have to return completely to stock. That means everything must be as it was out of the box. As for the ruu for your carrier, if they released it then it should be in one of the stickies.
Bat cave One
I'm on Three in the UK and before I flashed a custom ROM I made sure I got S-Off then flashed the latest unbranded firmware(FUU_4.19.401.9-TWRP2633_combined_nowipe.exe which I got from XDA) and then changed my CID to SuperCID. After that I flashed custom ROM without flashing a stock ROM. LTE/4G works perfectly ok.
heat57 said:
I'm on Three in the UK and before I flashed a custom ROM I made sure I got S-Off then flashed the latest unbranded firmware(FUU_4.19.401.9-TWRP2633_combined_nowipe.exe which I got from XDA) and then changed my CID to SuperCID. After that I flashed custom ROM without flashing a stock ROM. LTE/4G works perfectly ok.
Click to expand...
Click to collapse
Thanks Heat57. I'm currently S-On, Unlocked, Tampered. I've also found this thread:
http://forum.xda-developers.com/showthread.php?t=2419699
which seems to contain all of the radio files in the world, and also all of the firmware. This radio:
(1.29.401.12 WWE OTA) Radio_4A.14.3250.13_10.33.1150.01L
Looks interested, but you say you never flashed your radio? When did you get your one?
I'm thinking from your post I'm going to get S-OFF (using Revone, yes?) and flash a firmware to see if the 4G radio options show up. I can't see the one you mentioned - could you recommend one from the above thread? Also, it says TWRP - I'm using CWM - is that a problem?
Final question - if I do a backup I'm backing up the radio and firmware as well? So if I make a total plums of this I can get back to CWM and restore?
TIA for any further help you can give me
ShadowTD said:
Thanks Heat57. I'm currently S-On, Unlocked, Tampered. I've also found this thread:
http://forum.xda-developers.com/showthread.php?t=2419699
which seems to contain all of the radio files in the world, and also all of the firmware. This radio:
(1.29.401.12 WWE OTA) Radio_4A.14.3250.13_10.33.1150.01L
Looks interested, but you say you never flashed your radio? When did you get your one?
I'm thinking from your post I'm going to get S-OFF (using Revone, yes?) and flash a firmware to see if the 4G radio options show up. I can't see the one you mentioned - could you recommend one from the above thread? Also, it says TWRP - I'm using CWM - is that a problem?
Final question - if I do a backup I'm backing up the radio and firmware as well? So if I make a total plums of this I can get back to CWM and restore?
TIA for any further help you can give me
Click to expand...
Click to collapse
Well, I flashed the firmware, which amongst other hardware bits includes the radio. My first goal was to unlock the bootloader and then S-Off, as the latter removes any potential issues with firmware flashes and the like. I also went and changed CID to 11111111, which I understand is SuperCID and enables flashing of firmware and ROMs of different CID designations. Please beware, YOU MUST BE S-OFF FOR FIRMWARE FLASHING!!!
Regarding your question of revone, if you're on hboot 1.44 then yes, revone, hboot version 1.54 and 1.55 only work with rumrunner and latest versions require the 'firewater' exploit.
I am relatively new to HTC, although I owned an original Desire many years ago, so I still remember the peculiarities of HTC ROM. I had a Galaxy Note 2 and rooting and flashing ROMs there is a piece of cake by comparison. I digress.
Unlike most other manufacturers, where you get everything included in the custom ROM, it seems with HTC that is not the case, hence if you want to update your radio for example, you need to flash a firmware package. Therefore, I am not certain if a Nandroid would restore the firmware, if you encounter any problems, maybe someone more knowledgeable can confirm. In any event, if you're S-Off then flashing any firmware for the M7ul should work, so worst case, if you mess up you could always flash the one I pointed out via adb. Here is a link to the latest firmware http://forum.xda-developers.com/showthread.php?t=2485651
Regarding the recovery, I just prefer TWRP and use the one but last version 2.6.3.4, which works perfectly. #However, there is no reason why your CWM should not be adequate. Before I took the jump, after just receiving my One, I read through the threads for about a day to make sure I got it right.
Finally, if you end up rooted and S-Off then there is a supper little flashable zip called 'Guru_Bootloade_Reset_1.0.zip' that allows you to remove the tampered flag, relock the bootloader and unlock it again by simply flashing it and selecting what you want in it's aroma installer. You'll find it on XDA as well, justuse the search function.