My HFBLU-STH3 Bluetooth stereo headset successfully pairs and then connects with my Note 3. When I turn the headset off, the Note 3 correctly continues to list it as a paired device. But when I turn the headset back on, it does not re-connect to the Note 3. If I click on the device in the Note 3's Bluetooth settings, it says Connecting for a few seconds but then gives up. The only way I can re-connect is to redo the pairing.
It only takes a few seconds longer to re-pair the headset, so it's not a major problem. But I'd like to solve it if possible. Any suggestions?
Related
I have a Tilt and the 510 Voyager headset. I'm wondering if there's a way to do the following two things:
1. When the headset is turned on and connected to the phone is there a way that I can make it so that I can still talk on the phone? It seems like when the headset is turned on that the microphone and sound is muted on the phone, so you have to use the headset.
I want to be able to use either the phone or the headset at the same time.
2. If I walk out of range of the headset while it is turned on, then walk back in range, can I set it so that the headset will automatically reconnect?
1. You can switch from the headset to the phone during a call. It is one of the options on the "call screen". I don't believe you can set it to default, but you can just turn off bluetooth if you want the default headset to be the phone.
2. The headset should automatically reconnect when brought back in range. Try pushing the "pick up" button on the headset. It should automatically re-pair in a second or two.
i want to report an issue/bug that i've encountered yesterday when i purchased jabra bt620s bluetooth headset for listening music and making phone calls with my magic with ION rom.
when i connect the paired headset with the bluetooth enabled from before, the device only connects for a few seconds in MEDIA AUDIO mode, then remains only in phone audio mode, i have to disable and reenable the bluetooth on the magic to full connect the headset. annoying.
inf instead i enable the bluetooth on the device after that i've powered the headset on, the connection is full from the beginning....
result: i cannot let the bluetooth on in my magic.. because it's useless... i have to go then in preferences, wireless, bluetooth settings, ecc, ecc anyway =(
anyone with this problem?!?!
do you thik this is an ION ROM problem or bug?!?
try holding down the tap on the device in bt settings. then select to connect to media only. this works with my G1.
I've been using a new bluetooth headset for about a week now, and suddenly it won't stay connected to my Pure. I have not done anything different to the phone to affect the bluetooth settings, and I've checked them several times anyway and everything seems normal.
I even deleted the pair with the headset, re-paired, but still the same results. The headset is properly recognized, it connects to the phone normally, but after about 20 or 30 seconds it disconnects.
If I turn on the phone's bluetooth, turn on the headset, then make a call after it connects, the call is properly routed to the headset but only for those first 20 or 30 seconds. What's worse is when the headset disconnects from the phone during the call it doesn't just revert the call to the phone's mic & speaker, it ends the call.
By the way, the headset is a NoiseHush N450, but I don't think the problem is with the headset because the same thing happens when I pair my phone to other BT headsets.
Any ideas?
everything was all fun and well when i got the gear this past weekend. always connected to phone and everything. However today I got in my car, the phone connect to the bluetooth audio as usual, and I get an alert on the gear saying its been disconnected. I messed around with it and discovered that my note 3 can only connect to either the gear's call audio or the car's call audio, not both at the same time. (it can connect to the gear's call audio and the car's media audio though) The car connection takes priority every time. I figure I can live with that but when I get out of my car, the gear doesn't auto reconnect to my phone. I know auto-reconnect works because it does that with my car but how can I get the gear to do that as well?
thanks
OK this is a bit convoluted so please bare with me:
I have a motorola T605 installed, but do not have it hooked up to my car stereo. I use a 3.5mm cable from my Note 3 to my car stereo, and the T605 just for phone calls, BUT I do use the controls on the T605 to skip tracks.
The problem I have is it works great, until I make or receive a phone call, then the Bluetooth AVRCP profiles cease to work, and the volume keys, which were being used to skip tracks before the call, now only adjust the phone volume, and the T605 itself blinks Blue (indicating phone profile connected) instead of flashing yellow (indicating phone and media profiles connected) as it was before the phone call.
Once it happens the only way to restore it is to shut off the bluetooth car kit (ie turn my car off). Powering the bluetooth on the phone off/on does nothing, as when it reconnects it still only have the phone functionality.
When I look at the setting>Bluetooth menu on the Note, both before and after a call, it always says that both Phone and Media profiles are active and connected.
For the record I am using X-Note ROM.
Any suggestion? Thanks in advance everyone.
chris5h said:
OK this is a bit convoluted so please bare with me:
I have a motorola T605 installed, but do not have it hooked up to my car stereo. I use a 3.5mm cable from my Note 3 to my car stereo, and the T605 just for phone calls, BUT I do use the controls on the T605 to skip tracks.
The problem I have is it works great, until I make or receive a phone call, then the Bluetooth AVRCP profiles cease to work, and the volume keys, which were being used to skip tracks before the call, now only adjust the phone volume, and the T605 itself blinks Blue (indicating phone profile connected) instead of flashing yellow (indicating phone and media profiles connected) as it was before the phone call.
Once it happens the only way to restore it is to shut off the bluetooth car kit (ie turn my car off). Powering the bluetooth on the phone off/on does nothing, as when it reconnects it still only have the phone functionality.
When I look at the setting>Bluetooth menu on the Note, both before and after a call, it always says that both Phone and Media profiles are active and connected.
For the record I am using X-Note ROM.
Any suggestion? Thanks in advance everyone.
Click to expand...
Click to collapse
Ok so the moto T605 is connected via bluetooth, and under bluetooth settings both phone and media are checked correct? BUT your sending the media via 3.5mm jack. I hope I read what you wrote right. If I did, I think you need to UNcheck the media box in bluetooth settings and just have phone connected. This way the music will play via 3.5mm until the phone rings. Then it will mute the 3.5mm and you'll hear the phone call over bluetooth connection. Also since the T605 is still connected via bluetooth it should still change your tracks.
Try that or tell me I read the whole post wrong and we'll try a different scenario. lol
I think you misunderstand. The audio is playing fine out of the 3.5mm jack. My goal is to keep the AVRCP connected so I can use hte button on the bluetooth car kit to control the audio player functionality of note 3 when not on a call.